Prepare a test script to transition of the default branch name to
'main'.
* js/default-branch-name-adjust-t5411:
t5411: finish preparing for `main` being the default branch name
t5411: adjust the remaining support files for init.defaultBranch=main
t5411: start adjusting the support files for init.defaultBranch=main
t5411: start using the default branch name "main"
Junio C Hamano [Mon, 9 Nov 2020 22:06:26 +0000 (14:06 -0800)]
Merge branch 'pb/ref-filter-with-crlf'
A commit and tag object may have CR at the end of each and
every line (you can create such an object with hash-object or
using --cleanup=verbatim to decline the default clean-up
action), but it would make it impossible to have a blank line
to separate the title from the body of the message. Be lenient
and accept a line with lone CR on it as a blank line, too.
* pb/ref-filter-with-crlf:
log, show: add tests for messages containing CRLF
ref-filter: handle CRLF at end-of-line more gracefully
Junio C Hamano [Mon, 9 Nov 2020 22:06:25 +0000 (14:06 -0800)]
Merge branch 'nk/diff-files-vs-fsmonitor'
"git diff" and other commands that share the same machinery to
compare with working tree files have been taught to take advantage
of the fsmonitor data when available.
* nk/diff-files-vs-fsmonitor:
p7519-fsmonitor: add a git add benchmark
p7519-fsmonitor: refactor to avoid code duplication
perf lint: add make test-lint to perf tests
t/perf: add fsmonitor perf test for git diff
t/perf/p7519-fsmonitor.sh: warm cache on first git status
t/perf/README: elaborate on output format
fsmonitor: use fsmonitor data in `git diff`
Junio C Hamano [Mon, 9 Nov 2020 22:06:25 +0000 (14:06 -0800)]
Merge branch 'en/dir-rename-tests'
More preliminary tests have been added to document desired outcome
of various "directory rename" situations.
* en/dir-rename-tests:
t6423: more involved rules for renaming directories into each other
t6423: update directory rename detection tests with new rule
t6423: more involved directory rename test
directory-rename-detection.txt: update references to regression tests
Adjust tests so that they won't scream when the default initial
branch name is changed to 'main'.
* js/default-branch-name-part-4-minus-1:
t1400: prepare for `main` being default branch name
tests: prepare aligned mentions of the default branch name
t9902: prepare a test for the upcoming default branch name
t3200: prepare for `main` being shorter than `master`
t5703: adjust a test case for the upcoming default branch name
t6200: adjust suppression pattern to also match "main"
tests: start moving to a different default main branch name
t9801: use `--` in preparation for default branch rename
fmt-merge-msg: also suppress "into main" by default
Junio C Hamano [Mon, 2 Nov 2020 21:17:43 +0000 (13:17 -0800)]
Merge branch 'jt/apply-reverse-twice'
"git apply -R" did not handle patches that touch the same path
twice correctly, which has been corrected. This is most relevant
in a patch that changes a path from a regular file to a symbolic
link (and vice versa).
* jt/apply-reverse-twice:
apply: when -R, also reverse list of sections
Junio C Hamano [Mon, 2 Nov 2020 21:17:43 +0000 (13:17 -0800)]
Merge branch 'sc/sequencer-gpg-octopus'
"git rebase --rebase-merges" did not correctly pass --gpg-sign
command line option to underlying "git merge" when replaying a merge
using non-default merge strategy or when replaying an octopus merge
(because replaying a two-head merge with the default strategy was
done in a separate codepath, the problem did not trigger for most
users), which has been corrected.
* sc/sequencer-gpg-octopus:
t3435: add tests for rebase -r GPG signing
sequencer: pass explicit --no-gpg-sign to merge
sequencer: fix gpg option passed to merge subcommand
Junio C Hamano [Mon, 2 Nov 2020 21:17:42 +0000 (13:17 -0800)]
Merge branch 'en/test-selector'
Our test scripts can be told to run only individual pieces while
skipping others with the "--run=..." option; they were taught to
take a substring of test title, in addition to numbers, to name the
test pieces to run.
* en/test-selector:
test-lib: reduce verbosity of skipped tests
t6006, t6012: adjust tests to use 'setup' instead of synonyms
test-lib: allow selecting tests by substring/glob with --run
Junio C Hamano [Mon, 2 Nov 2020 21:17:39 +0000 (13:17 -0800)]
Merge branch 'bk/sob-dco'
Document that the meaning of a Signed-off-by trailer can vary from
project to project in the end-user documentation, and clarify what
it means to this project.
* bk/sob-dco:
Documentation: stylistically normalize references to Signed-off-by:
SubmittingPatches: clarify DCO is our --signoff rule
Documentation: clarify and expand description of --signoff
doc: preparatory clean-up of description on the sign-off option
Junio C Hamano [Mon, 2 Nov 2020 21:17:39 +0000 (13:17 -0800)]
Merge branch 'ds/commit-graph-merging-fix'
When "git commit-graph" detects the same commit recorded more than
once while it is merging the layers, it used to die. The code now
ignores all but one of them and continues.
* ds/commit-graph-merging-fix:
commit-graph: don't write commit-graph when disabled
commit-graph: ignore duplicates when merging layers
Junio C Hamano [Mon, 2 Nov 2020 21:17:38 +0000 (13:17 -0800)]
Merge branch 'es/test-cmp-typocatcher'
A test helper "test_cmp A B" was taught to diagnose missing files A
or B as a bug in test, but some tests legitimately wanted to notice
a failure to even create file B as an error, in addition to leaving
the expected result in it, and were misdiagnosed as a bug. This
has been corrected.
Junio C Hamano [Mon, 2 Nov 2020 21:17:37 +0000 (13:17 -0800)]
Merge branch 'js/avoid-split-sideband-message'
The side-band status report can be sent at the same time as the
primary payload multiplexed, but the demultiplexer on the receiving
end incorrectly split a single status report into two, which has
been corrected.
* js/avoid-split-sideband-message:
test-pkt-line: drop colon from sideband identity
sideband: report unhandled incomplete sideband messages as bugs
sideband: avoid reporting incomplete sideband messages
t5411: finish preparing for `main` being the default branch name
In addition to the trivial search-and-replace performed over the course
of the previous three commits, there is one test in t5411 that depends
on the length of the default branch name.
Adjust it and use `main` as the default branch name in this test.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, we adjusted roughly half of the support files,
to stay under the 100kB limit (mails larger than that are rejected by
the Git mailing list).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not convert the files in `t/t5411/` in one go because the patch
would be too big (mails larger than 100kB are rejected by the Git
mailing list). Instead, we start with roughly half of the support files.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a straight-forward search-and-replace in the test script;
However, this is not yet complete because it requires many more
replacements in `t/t5411/`, too many for a single patch (the Git mailing
list rejects mails larger than 100kB). For that reason, we disable this
test script temporarily via the `PREPARE_FOR_MAIN_BRANCH` prereq.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 30 Oct 2020 20:04:24 +0000 (13:04 -0700)]
Merge branch 'cm/t7xxx-cleanup'
Micro clean-up.
* cm/t7xxx-cleanup:
t7102: prepare expected output inside test_expect_* block
t7201: put each command on a separate line
t7201: use 'git -C' to avoid subshell
t7102,t7201: remove whitespace after redirect operator
t7102,t7201: remove unnecessary blank spaces in test body
t7101,t7102,t7201: modernize test formatting
Junio C Hamano [Thu, 29 Oct 2020 21:18:47 +0000 (14:18 -0700)]
Merge branch 'jk/committer-date-is-author-date-fix' into maint
In 2.29, "--committer-date-is-author-date" option of "rebase" and
"am" subcommands lost the e-mail address by mistake, which has been
corrected.
* jk/committer-date-is-author-date-fix:
rebase: fix broken email with --committer-date-is-author-date
am: fix broken email with --committer-date-is-author-date
t3436: check --committer-date-is-author-date result more carefully
Philippe Blain [Thu, 29 Oct 2020 12:48:29 +0000 (12:48 +0000)]
log, show: add tests for messages containing CRLF
A previous commit adjusted the code in ref-filter.c so that messages
containing CRLF are now correctly parsed and displayed.
Add tests to also check that `git log` and `git show` correctly handle
such messages, to prevent futur regressions if these commands are
refactored to use the ref-filter API.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Thu, 29 Oct 2020 12:48:28 +0000 (12:48 +0000)]
ref-filter: handle CRLF at end-of-line more gracefully
The ref-filter code does not correctly handle commit or tag messages
that use CRLF as the line terminator. Such messages can be created with
the `--cleanup=verbatim` option of `git commit` and `git tag`, or by
using `git commit-tree` directly.
The function `find_subpos` in ref-filter.c looks for two consecutive
LFs to find the end of the subject line, a sequence which is absent in
messages using CRLF. This results in the whole message being parsed as
the subject line (`%(contents:subject)`), and the body of the message
(`%(contents:body)`) being empty.
Moreover, in `copy_subject`, which wants to return the subject as a
single line, '\n' is replaced by space, but '\r' is
untouched.
This impacts the output of `git branch`, `git tag` and `git
for-each-ref`.
This behaviour is a regression for `git branch --verbose`, which
bisects down to 949af0684c (branch: use ref-filter printing APIs,
2017-01-10).
Adjust the ref-filter code to be more lenient by hardening the logic in
`copy_subject` and `find_subpos` to correctly parse messages containing
CRLF.
Add a new test script, 't3920-crlf-messages.sh', to test the behaviour
of commands using either the ref-filter or the pretty APIs with messages
using CRLF line endings. The function `test_crlf_subject_body_and_contents`
can be used to test that the `--format` option of `branch`, `tag`,
`for-each-ref`, `log` and `show` correctly displays the subject, body
and raw content of commit and tag messages using CRLF. Test the
output of `branch`, `tag` and `for-each-ref` with such commits.
Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 28 Oct 2020 09:33:24 +0000 (05:33 -0400)]
sideband: diagnose more sideband anomalies
In demultiplex_sideband(), there are two oddities when we check an
incoming packet:
- if it has zero length, then we assume it's a flush packet. This
means we fail to notice the difference between a real flush and a
true zero-length packet that's missing its sideband designator. It's
not a huge problem in practice because we'd never send a zero-length
data packet (even our keepalives are otherwise-empty sideband-1
packets).
But it would be nice to detect and report the error, since it's
likely to cause other confusion (we think the other side flushed,
but they do not).
- we try to detect packets missing their designator by checking for
"if (len < 1)". But this will never trigger for "len == 0"; we've
already detected that and left the function before then.
It _could_ detect a negative "len" parameter. But in that case, the
error message is wrong. The issue is not "no sideband" but rather
"eof while reading the packet". However, this can't actually be
triggered in practice, because neither of the two callers uses
pkt_read's GENTLE_ON_EOF flag. Which means they'd die with "the
remote end hung up unexpectedly" before we even get here.
So this truly is dead code.
We can improve these cases by passing in a pkt-line status to the
demultiplexer, and by having recv_sideband() use GENTLE_ON_EOF. This
gives us two improvements:
- we can now reliably detect flush packets, and will report a normal
packet missing its sideband designator as an error
- we'll report an eof with a more detailed "protocol error: eof while
reading sideband packet", rather than the generic "the remote end
hung up unexpectedly"
- when we see an eof, we'll flush the sideband scratch buffer, which
may provide some hints from the remote about why they hung up
(though note we already flush on newlines, so it's likely that most
such messages already made it through)
In some sense this patch goes against fbd76cd450 (sideband: reverse its
dependency on pkt-line, 2019-01-16), which caused the sideband code not
to depend on the pkt-line code. But that commit was really just trying
to deal with the circular header dependency. The two modules are
conceptually interlinked, and it was just trying to keep things
compiling. And indeed, there's a sticking point in this patch: because
pkt-line.h includes sideband.h, we can't add the reverse include we need
for the sideband code to have an "enum packet_read_status" parameter.
Nor can we forward declare it, because you can't forward declare an enum
in C. However, C does guarantee that enums fit in an int, so we can just
use that type.
One alternative would be for the callers to check themselves that they
got something sane from the pkt-line code. But besides duplicating
logic, this gets quite tricky. Any error condition requires flushing the
sideband #2 scratch buffer, which only demultiplex_sideband() knows how
to do.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Felipe Contreras [Wed, 28 Oct 2020 02:06:55 +0000 (20:06 -0600)]
completion: fix conflict with bashcomp
We don't want to override the 'complete()' function in zsh, which can be
used by bashcomp.
Reported-by: Mark Lodato <lodato@google.com> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Felipe Contreras [Wed, 28 Oct 2020 02:06:51 +0000 (20:06 -0600)]
completion: zsh: fix for command aliasing
A lot of people want to define aliases like gc='git commit', and zsh
allows that (when not using 'complete_aliases'), but we need to handle
services that call a function other than the main one.
With this patch we can do:
compdef _git gc=git_commit
Additionally, add compatibility for Zsh Git functions which have the
form git-commit (with dash, not underscore).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Felipe Contreras [Wed, 28 Oct 2020 02:06:49 +0000 (20:06 -0600)]
completion: zsh: update slave script locations
Update the default locations of typical system bash-completion,
including the default bash-completion location for user scripts, and the
recommended way to find the system location (with pkg-config).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 27 Oct 2020 22:09:50 +0000 (15:09 -0700)]
Merge branch 'dl/checkout-p-merge-base'
"git checkout -p A...B [-- <path>]" did not work, even though the
same command without "-p" correctly used the merge-base between
commits A and B.
* dl/checkout-p-merge-base:
t2016: add a NEEDSWORK about the PERL prerequisite
add-patch: add NEEDSWORK about comparing commits
Doc: document "A...B" form for <tree-ish> in checkout and switch
builtin/checkout: fix `git checkout -p HEAD...` bug
Junio C Hamano [Tue, 27 Oct 2020 22:09:49 +0000 (15:09 -0700)]
Merge branch 'sb/clone-origin'
"git clone" learned clone.defaultremotename configuration variable
to customize what nickname to use to call the remote the repository
was cloned from.
* sb/clone-origin:
clone: allow configurable default for `-o`/`--origin`
clone: read new remote name from remote_name instead of option_origin
clone: validate --origin option before use
refs: consolidate remote name validation
remote: add tests for add and rename with invalid names
clone: use more conventional config/option layering
clone: add tests for --template and some disallowed option pairs
Junio C Hamano [Tue, 27 Oct 2020 22:09:49 +0000 (15:09 -0700)]
Merge branch 'sk/force-if-includes'
"git push --force-with-lease[=<ref>]" can easily be misused to lose
commits unless the user takes good care of their own "git fetch".
A new option "--force-if-includes" attempts to ensure that what is
being force-pushed was created after examining the commit at the
tip of the remote ref that is about to be force-replaced.
* sk/force-if-includes:
t, doc: update tests, reference for "--force-if-includes"
push: parse and set flag for "--force-if-includes"
push: add reflog check for "--force-if-includes"
Jeff King [Tue, 27 Oct 2020 07:37:14 +0000 (03:37 -0400)]
checkout-index: propagate errors to exit code
If we encounter an error while checking out an explicit path, we print a
message to stderr but do not actually exit with a non-zero code. While
this is a plumbing command and the behavior goes all the way back to 33db5f4d90 (Add a "checkout-cache" command which does what the name
suggests., 2005-04-09), this is almost certainly an oversight:
- we _do_ return an exit code from checkout_file(); the caller just
never reads it
- errors while checking out all paths (with "-a") do result in a
non-zero exit code.
- it would be quite unusual not to use the exit code for an error,
as otherwise the caller has no idea the command failed except by
scraping stderr
To keep our tests simple and portable, we can use the most obvious
error: asking to checkout a path which is not in the index at all.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 27 Oct 2020 07:36:02 +0000 (03:36 -0400)]
checkout-index: drop error message from empty --stage=all
If checkout-index is given --stage=all for a specific path, it will try
to write stages 1-3 (if present) for that path to temporary files.
However, if the file is present only at stage 0, it writes nothing but
gives a confusing message:
$ git checkout-index --stage=all -- Makefile
git checkout-index: Makefile does not exist at stage 4
This is nonsense. There is no stage 4 (it's just an internal enum value
we use for "all"), and the documentation clearly states:
Paths which only have a stage 0 entry will always be omitted from the
output.
Here it's talking about the list of tempfiles written to stdout, but it
seems clear that this case was not meant to be an error. We even have a
test which covers it, but it only checks that the command reports an
exit code of 0, not its stderr. And it reports 0 only because of another
bug which fails to propagate errors (which will be fixed in a subsequent
patch).
So let's make the test more thorough. We'll also cover the case that we
found _no_ entry, not even a stage zero, which should still be an error.
However, because of the other bug, we'll have to mark this as expecting
failure for the moment.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 27 Oct 2020 07:13:09 +0000 (03:13 -0400)]
test-pkt-line: drop colon from sideband identity
We pass "sideband: " as our identity for errors to recv_sideband(). But
it already adds the trailing colon and space. This doesn't invalidate
any tests, but it looks funny when you examine the test output.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
remote: add meaningful exit code on missing/existing
Change the exit code for the likes of "git remote add/rename" to exit
with 2 if the remote in question doesn't exist, and 3 if it
does. Before we'd just die() and exit with the general 128 exit code.
This changes the output message from e.g.:
fatal: remote origin already exists.
To:
error: remote origin already exists.
Which I believe is a feature, since we generally use "fatal" for the
generic errors, and "error" for the more specific ones with a custom
exit code, but this part of the change may break code that already
relies on stderr parsing (not that we ever supported that...).
The motivation for this is a discussion around some code in GitLab's
gitaly which wanted to check this, and had to parse stderr to do so:
https://gitlab.com/gitlab-org/gitaly/-/merge_requests/2695
It's worth noting as an aside that a method of checking this that
doesn't rely on that is to check with "git config" whether the value
in question does or doesn't exist. That introduces a TOCTOU race
condition, but on the other hand this code (e.g. "git remote add")
already has a TOCTOU race.
We go through the config.lock for the actual setting of the config,
but the pseudocode logic is:
So e.g. if a sleep() is added right after the remote_is_configured()
check in add() we'll clobber remote.NAME.url, and add another (usually
duplicate) remote.NAME.fetch entry (and other values, depending on
invocation).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
