Junio C Hamano [Mon, 11 Apr 2011 16:33:06 +0000 (09:33 -0700)]
Merge git://git.kernel.org/pub/scm/gitk/gitk
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Update cherry-pick error message parsing
gitk: Quote tag names in event bindings to avoid problems with % chars
gitk: Allow user to control how much of the SHA1 ID gets auto-selected
gitk: spelling fixes in Russian translation
gitk: Take only numeric version components when computing $git_version
James Y Knight [Mon, 4 Apr 2011 19:09:08 +0000 (15:09 -0400)]
git-svn: Cache results of running the executable "git config"
Running programs is not cheap!
Signed-off-by: James Y Knight <jknight@itasoftware.com> Signed-off-by: Alejandro R. Sedeño <asedeno@mit.edu> Acked-by: Eric Wong <normalperson@yhbt.net>
git-svn: Add a svn-remote.<name>.pushurl config key
Similar to the 'remote.<name>.pushurl' config key for git remotes,
'pushurl' is designed to be used in cases where 'url' points to an SVN
repository via a read-only transport, to provide an alternate
read/write transport. It is assumed that both keys point to the same
repository.
The 'pushurl' key is distinct from the 'commiturl' key in that
'commiturl' is a full svn path while 'pushurl' (like 'url') is a base
path. 'commiturl' takes precendece over 'pushurl' in cases where
either might be used.
The 'pushurl' is used by git-svn's dcommit and branch commands.
Signed-off-by: Alejandro R. Sedeño <asedeno@mit.edu> Reviewed-by: James Y Knight <jknight@itasoftware.com> Acked-by: Eric Wong <normalperson@yhbt.net>
Anders Kaseorg [Wed, 19 Jan 2011 19:45:00 +0000 (14:45 -0500)]
gitk: Update cherry-pick error message parsing
Commit 981ff5c37ae20687c98d98c8689d5e89016026d2 changed the error
message from git cherry-pick from
Automatic cherry-pick failed. [...advice...]
to
error: could not apply 7ab78c9... Do something neat.
[...advice...]
Update gitk’s regex to match this, restoring the ability to launch git
citool to resolve conflicted cherry-picks.
Signed-off-by: Anders Kaseorg <andersk@mit.edu> Signed-off-by: Paul Mackerras <paulus@samba.org>
Andrew Garber [Thu, 7 Apr 2011 06:01:21 +0000 (02:01 -0400)]
git-p4: replace each tab with 8 spaces for consistency
Note that the majority of git-p4 uses spaces, not tabs, for indentation.
Consistent indentation is a good hygiene for Python scripts, and mixing
tabs and spaces in Python can lead to hard-to-find bugs.
Signed-off-by: Andrew Garber <andrew@andrewgarber.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 6 Apr 2011 17:40:49 +0000 (10:40 -0700)]
Merge branch 'mg/rev-list-n-reverse-doc' into maint
* mg/rev-list-n-reverse-doc:
git-log.txt,rev-list-options.txt: put option blocks in proper order
git-log.txt,rev-list-options.txt: -n/--max-count is commit limiting
Junio C Hamano [Wed, 6 Apr 2011 17:38:14 +0000 (10:38 -0700)]
Merge branch 'jk/maint-remote-mirror-safer'
* jk/maint-remote-mirror-safer:
remote: deprecate --mirror
remote: separate the concept of push and fetch mirrors
remote: disallow some nonsensical option combinations
Junio C Hamano [Mon, 4 Apr 2011 22:02:01 +0000 (15:02 -0700)]
Merge branch 'jl/submodule-fetch-on-demand'
* jl/submodule-fetch-on-demand:
fetch/pull: Describe --recurse-submodule restrictions in the BUGS section
submodule update: Don't fetch when the submodule commit is already present
fetch/pull: Don't recurse into a submodule when commits are already present
Submodules: Add 'on-demand' value for the 'fetchRecurseSubmodule' option
config: teach the fetch.recurseSubmodules option the 'on-demand' value
fetch/pull: Add the 'on-demand' value to the --recurse-submodules option
fetch/pull: recurse into submodules when necessary
Jakub Narebski [Fri, 1 Apr 2011 19:06:28 +0000 (21:06 +0200)]
gitweb: Fix parsing of negative fractional timezones in JavaScript
Extract converting numerical timezone in the form of '(+|-)HHMM' to
timezoneOffset function, and fix parsing of negative fractional
timezones.
This is used to format timestamps in 'blame_incremental' view; this
complements commit 2b1e172 (gitweb: Fix handling of fractional
timezones in parse_date, 2011-03-25).
Jeff King [Fri, 25 Mar 2011 18:13:31 +0000 (14:13 -0400)]
pull: do not clobber untracked files on initial pull
For a pull into an unborn branch, we do not use "git merge"
at all. Instead, we call read-tree directly. However, we
used the --reset parameter instead of "-m", which turns off
the safety features.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 3 Apr 2011 19:31:19 +0000 (12:31 -0700)]
Merge branch 'jk/format-patch-multiline-header' into maint
* jk/format-patch-multiline-header:
format-patch: rfc2047-encode newlines in headers
format-patch: wrap long header lines
strbuf: add fixed-length version of add_wrapped_text
Jonathan Nieder [Fri, 18 Mar 2011 20:23:52 +0000 (15:23 -0500)]
compat: add missing #include <sys/resource.h>
Starting with commit c793430 (Limit file descriptors used by packs,
2011-02-28), git uses getrlimit to tell how many file descriptors it
can use. Unfortunately it does not include the header declaring that
function, resulting in compilation errors:
sha1_file.c: In function 'open_packed_git_1':
sha1_file.c:718: error: storage size of 'lim' isn't known
sha1_file.c:721: warning: implicit declaration of function 'getrlimit'
sha1_file.c:721: error: 'RLIMIT_NOFILE' undeclared (first use in this function)
sha1_file.c:718: warning: unused variable 'lim'
The standard header to include for this is <sys/resource.h> (which on
some systems itself requires declarations from <sys/types.h> or
<sys/time.h>). Probably the problem was missed until now because in
current glibc sys/resource.h happens to be included by sys/wait.h.
MinGW does not provide sys/resource.h (and compat/mingw takes care of
providing getrlimit some other way), so add the missing #include to
the "#ifndef __MINGW32__" block in git-compat-util.h.
Reported-by: Stefan Sperling <stsp@stsp.name> Tested-by: Stefan Sperling <stsp@stsp.name> [on OpenBSD] Tested-by: Arnaud Lacombe <lacombar@gmail.com> [on FreeBSD 8] Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If font-lock is disabled, font-lock-compile-keywords complains.
Really what we want to do is to replace log-edit's font-lock
definitions with our own, so define a major mode deriving from
log-edit and set up font-lock-defaults there. We then use the
optional MODE argument to log-edit to set up the major mode of the
commit buffer appropriately.
Signed-off-by: Lawrence Mitchell <wence@gmx.li> Acked-by: Alexandre Julliard <julliard@winehq.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t2019-checkout-ambiguous-ref.sh: depend on C_LOCALE_OUTPUT
The t2019-checkout-ambiguous-ref.sh tests added in v1.7.4.3~12^2
examines the output for a translatable string, and must be marked
with C_LOCALE_OUTPUT; otherwise, GETTEXT_POISON=YesPlease tests
will break.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephen Boyd [Sun, 3 Apr 2011 07:06:54 +0000 (00:06 -0700)]
sparse: Fix errors and silence warnings
* load_file() returns a void pointer but is using 0 for the return
value
* builtin/receive-pack.c forgot to include builtin.h
* packet_trace_prefix can be marked static
* ll_merge takes a pointer for its last argument, not an int
* crc32 expects a pointer as the second argument but Z_NULL is defined
to be 0 (see 38f4d13 sparse fix: Using plain integer as NULL pointer,
2006-11-18 for more info)
Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 3 Apr 2011 06:08:13 +0000 (23:08 -0700)]
Doc: mention --delta-base-offset is the default for Porcelain commands
The underlying pack-objects plumbing command still needs an explicit
option from the command line, but these days Porcelain passes the
option, so there is no need for end users to worry about it anymore.
Junio C Hamano [Fri, 1 Apr 2011 18:04:46 +0000 (11:04 -0700)]
"log --cherry-pick" documentation regression fix
Earlier f98fd43 (git-log.txt,rev-list-options.txt: put option blocks in
proper order, 2011-03-08) moved the text around in the documentation for
options in the rev-list family of commands such as "log". Consequently,
the description of the --cherry-pick option appears way above the
description of the --left-right option now.
But the description of the --cherry-pick option still refers to the
example for the --left-right option, like this:
... with --left-right, like the example ABOVE in the description of
that option.
Rephrase it to clarify that we are making a forward reference.
Jeff King [Fri, 1 Apr 2011 14:46:27 +0000 (10:46 -0400)]
docs: fix filter-branch subdir example for exotic repo names
The GIT_INDEX_FILE variable we get from git has the full
path to the repo, which may contain spaces. When we use it
in our shell snippet, it needs to be quoted.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule: process conflicting submodules only once
During a merge module_list returns conflicting submodules several times
(stage 1,2,3) which caused the submodules to be used multiple times in
git submodule init, sync, update and status command.
There are 5 callers of module_list; they all read (mode, sha1, stage,
path) tuple, and most of them care only about path. As a first level
approximation, it should be Ok (in the sense that it does not make things
worse than it currently is) to filter the duplicate paths from module_list
output, but some callers should change their behaviour when the merge in
the superproject still has conflicts.
Notice the higher-stage entries, and emit only one record from
module_list, but while doing so, mark the entry with "U" (not [0-3]) in
the $stage field and null out the SHA-1 part, as the object name for the
lowest stage does not give any useful information to the caller, and this
way any caller that uses the object name would hopefully barf. Then
update the codepaths for each subcommands this way:
- "update" should not touch the submodule repository, because we do not
know what commit should be checked out yet.
- "status" reports the conflicting submodules as 'U000...000' and does
not recurse into them (we might later want to make it recurse).
- The command called by "foreach" may want to do whatever it wants to do
by noticing the merged status in the superproject itself, so feed the
path to it from module_list as before, but only once per submodule.
- "init" and "sync" are unlikely things to do while the superproject is
still not merged, but as long as a submodule is there in $path, there
is no point skipping it. It might however want to take the merged
status of .gitmodules into account, but that is outside of the scope of
this topic.
Acked-by: Jens Lehmann <Jens.Lehmann@web.de> Thanks-to: Junio C Hamano <gitster@pobox.com> Signed-off-by: Nicolas Morey-Chaisemartin <nicolas@morey-chaisemartin.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 30 Mar 2011 21:10:41 +0000 (14:10 -0700)]
Merge branch 'maint'
* maint:
contrib/thunderbird-patch-inline: do not require bash to run the script
t8001: check the exit status of the command being tested
strbuf.h: remove a tad stale docs-in-comment and reference api-doc instead
Typos: t/README
Documentation/config.txt: make truth value of numbers more explicit
git-pack-objects.txt: fix grammatical errors
parse-remote: replace unnecessary sed invocation
Jeff King [Wed, 30 Mar 2011 19:53:39 +0000 (15:53 -0400)]
remote: deprecate --mirror
The configuration created by plain --mirror is dangerous and
useless, and we now have --mirror=fetch and --mirror=push to
replace it. Let's warn the user.
One alternative to this is to try to guess which type the
user wants. In a non-bare repository, a fetch mirror doesn't
make much sense, since it would overwrite local commits. But
in a bare repository, you might use either type, or even
both (e.g., if you are acting as an intermediate drop-point
across two disconnected networks).
So rather than try for complex heuristics, let's keep it
simple. The user knows what they're trying to do, so let
them tell us.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 30 Mar 2011 19:53:19 +0000 (15:53 -0400)]
remote: separate the concept of push and fetch mirrors
git-remote currently has one option, "--mirror", which sets
up mirror configuration which can be used for either
fetching or pushing. It looks like this:
However, a remote like this can be dangerous and confusing.
Specifically:
1. If you issue the wrong command, it can be devastating.
You are not likely to "push" when you meant to "fetch",
but "git remote update" will try to fetch it, even if
you intended the remote only for pushing. In either
case, the results can be quite destructive. An
unintended push will overwrite or delete remote refs,
and an unintended fetch can overwrite local branches.
2. The tracking setup code can produce confusing results.
The fetch refspec above means that "git checkout -b new
master" will consider refs/heads/master to come from
the remote "mirror", even if you only ever intend to
push to the mirror. It will set up the "new" branch to
track mirror's refs/heads/master.
3. The push code tries to opportunistically update
tracking branches. If you "git push mirror foo:bar",
it will see that we are updating mirror's
refs/heads/bar, which corresponds to our local
refs/heads/bar, and will update our local branch.
To solve this, we split the concept into "push mirrors" and
"fetch mirrors". Push mirrors set only remote.*.mirror,
solving (2) and (3), and making an accidental fetch write
only into FETCH_HEAD. Fetch mirrors set only the fetch
refspec, meaning an accidental push will not force-overwrite
or delete refs on the remote end.
The new syntax is "--mirror=<fetch|push>". For
compatibility, we keep "--mirror" as-is, setting up both
types simultaneously.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 30 Mar 2011 19:52:52 +0000 (15:52 -0400)]
remote: disallow some nonsensical option combinations
It doesn't make sense to use "-m" on a mirror, since "-m"
sets up the HEAD symref in the remotes namespace, but with
mirror, we are by definition not using a remotes namespace.
Similarly, it does not make much sense to specify refspecs
with --mirror. For a mirror you plan to push to, those
refspecs will be ignored. For a mirror you are fetching
from, there is no point in mirroring, since the refspec
specifies everything you want to grab.
There is one case where "--mirror -t <X>" would be useful.
Because <X> is used as-is in the refspec, and because we
append it to to refs/, you could mirror a subset of the
hierarchy by doing:
git remote add --mirror -t 'tags/*'
But using anything besides a single branch as an argument to
"-t" is not documented and only happens to work, so closing
it off is not a serious regression.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Joe Ratterman [Wed, 30 Mar 2011 19:31:05 +0000 (14:31 -0500)]
grep: allow -E and -n to be turned on by default via configuration
Add two configration variables grep.extendedRegexp and grep.lineNumbers to
allow the user to skip typing -E and -n on the command line, respectively.
Scripts that are meant to be used by random users and/or in random
repositories now have use -G and/or --no-line-number options as
appropriately to override the settings in the repository or user's
~/.gitconfig settings. Just because the script didn't say "git grep -n" no
longer guarantees that the output from the command will not have line
numbers.
Signed-off-by: Joe Ratterman <jratt0@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 30 Mar 2011 17:49:13 +0000 (10:49 -0700)]
Merge branch 'svn-fe' of git://repo.or.cz/git/jrn
* 'svn-fe' of git://repo.or.cz/git/jrn:
tests: kill backgrounded processes more robustly
vcs-svn: a void function shouldn't try to return something
tests: make sure input to sed is newline terminated
vcs-svn: add missing cast to printf argument
Jeff King [Wed, 30 Mar 2011 03:30:17 +0000 (23:30 -0400)]
tests: kill backgrounded processes more robustly
t0081 creates several background processes that write to a fifo and
then go to sleep for a while (so the reader of the fifo does not see
EOF).
Each background process is made in a curly-braced block in the shell,
and after we are done reading from the fifo, we use "kill $!" to kill
it off.
For a simple, single-command process, this works reliably and kills
the child sleep process. But for more complex commands like
"make_some_output && sleep", the results are less predictable. When
executing under bash, we end up with a subshell that gets killed by
the $! but leaves the sleep process still alive.
This is bad not only for process hygeine (we are leaving random sleep
processes to expire after a while), but also interacts badly with the
"prove" command. When prove executes a test, it does not realize the
test is done when it sees SIGCHLD, but rather waits until the test's
stdout pipe is closed. The orphaned sleep process may keep that pipe
open via test-lib's file descriptor 5, causing prove to hang for 100
seconds.
The solution is to explicitly use a subshell and to exec the final
sleep process, so that when we "kill $!" we get the process id of the
sleep process.
[jn: original patch by Jeff had some additional bits:
1. Wrap the "kill" in a test_when_finished, since we want
to clean up the process whether the test succeeds or not.
2. The "kill" is part of our && chain for test success. It
probably won't fail, but it can if the process has
expired before we manage to kill it. So let's mark it
as OK to fail.
I'm postponing that for now.]
Reported-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Michael Witten [Tue, 29 Mar 2011 17:31:30 +0000 (17:31 +0000)]
vcs-svn: a void function shouldn't try to return something
As v1.7.4-rc0~184 (2010-10-04) and C99 §6.8.6.4.1 remind us, standard
C does not permit returning an expression of type void, even for a
tail call.
Noticed with gcc -pedantic:
vcs-svn/svndump.c: In function 'handle_node':
vcs-svn/svndump.c:213:3: warning: ISO C forbids 'return' with expression,
in function returning void [-pedantic]
[jn: with simplified log message]
Signed-off-by: Michael Witten <mfwitten@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Junio C Hamano [Tue, 29 Mar 2011 19:29:10 +0000 (12:29 -0700)]
Revert two "no-done" reverts
Last night I had to make these two emergency reverts, but now we have a
better understanding of which part of the topic was broken, let's get rid
of the revert to fix it correctly.
Junio C Hamano [Tue, 29 Mar 2011 17:24:59 +0000 (10:24 -0700)]
enable "no-done" extension only when serving over smart-http
Do not advertise no-done capability when upload-pack is not serving over
smart-http, as there is no way for this server to know when it should stop
reading in-flight data from the client, even though it is necessary to
drain all the in-flight data in order to unblock the client.
Signed-off-by: Junio C Hamano <gitster@pobox.com> Acked-by: Shawn O. Pearce <spearce@spearce.org>
Junio C Hamano [Tue, 29 Mar 2011 17:06:19 +0000 (10:06 -0700)]
Fix potential local deadlock during fetch-pack
The fetch-pack/upload-pack protocol relies on the underlying transport
(local pipe or TCP socket) to have enough slack to allow one window worth
of data in flight without blocking the writer. Traditionally we always
relied on being able to have two windows of 32 "have"s in flight (roughly
3k bytes) to stream.
The recent "progressive-stride" change allows "fetch-pack" to send up to
1024 "have"s without reading any response from "upload-pack". The
outgoing pipe of "upload-pack" can be clogged with many ACK and NAK that
are unread, while "fetch-pack" is still stuffing its outgoing pipe with
more "have"s, leading to a deadlock.
Revert the change unless we are in stateless rpc (aka smart-http) mode, as
using a large window full of "have"s is still a good way to help reduce
the number of back-and-forth, and there is no buffering issue there (it is
strictly "ping-pong" without an overlap).
Junio C Hamano [Tue, 29 Mar 2011 17:16:29 +0000 (10:16 -0700)]
enable "no-done" extension only when fetching over smart-http
When 'no-done' protocol extension is used, the upload-pack (i.e. the
server side) process stops listening to the fetch-pack after issuing the
final NAK, and starts sending the generated pack data back, but there may
be more "have" send by the latter in flight that the fetch-pack is
expecting to be responded with ACK/NAK. This will typically result in a
deadlock (both will block on write that the other end never reads) or
SIGPIPE on the fetch-pack end (upload-pack will finish writing a small
pack and goes away).
Disable it unless fetch-pack is running under smart-http, where there is
no such streaming issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com> Acked-by: Shawn O. Pearce <spearce@spearce.org>
Alex Riesen [Sat, 26 Mar 2011 18:46:34 +0000 (19:46 +0100)]
HOME must be set before calling git-init when creating test repositories
Otherwise the created test repositories will be affected by users ~/.gitconfig.
For example, setting core.logAllrefupdates in users config will make all
calls to "git config --unset core.logAllrefupdates" fail which will break
the first test which uses the statement and expects it to succeed.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Tue, 29 Mar 2011 03:08:20 +0000 (22:08 -0500)]
tests: make sure input to sed is newline terminated
POSIX only requires sed to work on text files and because it does
not end with a newline, this commit's content is not a text file.
Add a newline to fix it. Without this change, OS X sed helpfully
adds a newline to actual.message, causing t9010.13 to fail.
Reported-by: Torsten Bögershausen <tboegi@web.de> Tested-by: Brian Gernhardt <benji@silverinsanity.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
This reverts 3e63b21 (upload-pack: Implement no-done capability,
2011-03-14). Together with 761ecf0 (fetch-pack: Implement no-done
capability, 2011-03-14) it seems to make the fetch-pack process out of
sync and makes it keep talking long after upload-pack stopped listening to
it, terminating the process with SIGPIPE.
Jens Lehmann [Mon, 28 Mar 2011 19:16:09 +0000 (21:16 +0200)]
tests: fix overeager scrubbing of environment variables
In commit 95a1d12e9b9f ("tests: scrub environment of GIT_* variables") all
environment variables starting with "GIT_" were unset for the tests using
a perl script rather than unsetting them one by one. Only three exceptions
were made to make them work as before: "GIT_TRACE*", "GIT_DEBUG*" and
"GIT_USE_LOOKUP".
Unfortunately some environment variables used by the test framework itself
were not added to the exceptions and thus stopped working when given
before the make command instead of after it. Those are:
I noticed that when skipping a test the way I was used to suddenly failed:
GIT_SKIP_TESTS='t1234' GIT_TEST_OPTS='--root=/dev/shm' make -j10 test
This should work according to t/README, but didn't anymore, so let's fix
that by adding them to the exception list. And to avoid having a long
regexp put the exceptions in a separate variable using nicer formatting.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Acked-by: Jonathan Nieder <jrnieder@gmail.com> Thanks-to: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Giuseppe Bilotta [Mon, 28 Mar 2011 07:39:59 +0000 (09:39 +0200)]
Improve test for pthreads flag
When compiling with CC=clang using Clang 1.1 as shipped by Debian
unstable (package version 2.7-3), the -mt flag is sufficient to compile
during the `configure` test. However, building git would then fail at
link time complaining about missing symbols such as `pthread_key_create'
and `pthread_create'.
Work around this issue by adding pthread key creation to the pthreads
configure test source.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Mon, 28 Mar 2011 00:38:15 +0000 (19:38 -0500)]
vcs-svn: add missing cast to printf argument
gcc -m32 correctly warns:
vcs-svn/fast_export.c: In function 'fast_export_commit':
vcs-svn/fast_export.c:54:2: warning: format '%llu' expects
argument of type 'long long unsigned int', but argument 2
has type 'unsigned int' [-Wformat]
Fix it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Sun, 27 Mar 2011 17:19:14 +0000 (12:19 -0500)]
vcs-svn: add missing cast to printf argument
gcc -m32 correctly warns:
vcs-svn/fast_export.c: In function 'fast_export_commit':
vcs-svn/fast_export.c:54:2: warning: format '%llu' expects
argument of type 'long long unsigned int', but argument 2
has type 'unsigned int' [-Wformat]
Fix it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
projects / thirdparty / git.git / log
