Mark Wielaard [Wed, 15 May 2019 15:14:01 +0000 (17:14 +0200)]
dlfcn: Guard __dlerror_main_freeres with __libc_once_get (once) [BZ# 24476]
dlerror.c (__dlerror_main_freeres) will try to free resources which only
have been initialized when init () has been called. That function is
called when resources are needed using __libc_once (once, init) where
once is a __libc_once_define (static, once) in the dlerror.c file.
Trying to free those resources if init () hasn't been called will
produce errors under valgrind memcheck. So guard the freeing of those
resources using __libc_once_get (once) and make sure we have a valid
key. Also add a similar guard to __dlerror ().
* dlfcn/dlerror.c (__dlerror_main_freeres): Guard using
__libc_once_get (once) and static_bug == NULL.
(__dlerror): Check we have a valid key, set result to static_buf
otherwise.
Andreas Schwab [Tue, 14 May 2019 15:14:59 +0000 (17:14 +0200)]
Fix crash in _IO_wfile_sync (bug 20568)
When computing the length of the converted part of the stdio buffer, use
the number of consumed wide characters, not the (negative) distance to the
end of the wide buffer.
Florian Weimer [Wed, 15 May 2019 11:51:35 +0000 (13:51 +0200)]
nss: Turn __nss_database_lookup into a compatibility symbol
The function uses the internal service_user type, so it is not
really usable from the outside of glibc. Rename the function
to __nss_database_lookup2 for internal use, and change
__nss_database_lookup to always indicate failure to the caller.
__nss_next already was a compatibility symbol. The new
implementation always fails and no longer calls __nss_next2.
unscd, the alternative nscd implementation, does not use
__nss_database_lookup, so it is not affected by this change.
Florian Weimer [Wed, 15 May 2019 05:16:47 +0000 (07:16 +0200)]
iconv: Remove public declaration of __gconv_transliterate
Commit ba7b4d294b01870ce3497971e9d07ee261cdc540 ("Complete the
removal of __gconv_translit_find") added a declaration of the
GLIBC_PRIVATE function, __gconv_transliterate, to the installed
header <gconv.h>. It should have been added to the internal
<gconv_int.h> header.
This allows sets a path using --bindir. Checked on x86_64-linux-gnu
with a non-default --bindir and checked resulting installed binaries
(pldd for instance).
This patch removes the arch-specific x86 assembly implementation for
low level locking and consolidate both 64 bits and 32 bits in a
single implementation.
Different than other architectures, x86 lll_trylock, lll_lock, and
lll_unlock implements a single-thread optimization to avoid atomic
operation, using cmpxchgl instead. This patch implements by using
the new single-thread.h definitions in a generic way, although using
the previous semantic.
The lll_cond_trylock, lll_cond_lock, and lll_timedlock just use
atomic operations plus calls to lll_lock_wait*.
For __lll_lock_wait_private and __lll_lock_wait the generic implemtation
there is no indication that assembly implementation is required
performance-wise.
This patch optimizes both __lll_lock_wait_private and __lll_lock_wait
by issuing only one lll_futex_wait. Since it is defined as an inlined
syscall and inlined syscalls are defined using inlined assembly the
compiler usually can not see both calls are equal and optimize
accordingly.
This patch move the single-thread syscall optimization defintions from
syscall-cancel.h to new header file single-thread.h and also move the
cancellation definitions from pthreadP.h to syscall-cancel.h.
The idea is just simplify the inclusion of both syscall-cancel.h and
single-thread.h (without the requirement of including all pthreadP.h
defintions).
No semantic changes expected, checked on a build for all major ABIs.
* nptl/pthreadP.h (CANCEL_ASYNC, CANCEL_RESET, LIBC_CANCEL_ASYNC,
LIBC_CANCEL_RESET, __libc_enable_asynccancel,
__libc_disable_asynccancel, __librt_enable_asynccancel,
__libc_disable_asynccancel, __librt_enable_asynccancel,
__librt_disable_asynccancel): Move to ...
* sysdeps/unix/sysv/linux/sysdep-cancel.h: ... here.
(SINGLE_THREAD_P, RTLD_SINGLE_THREAD_P): Move to ...
* sysdeps/unix/sysv/linux/single-thread.h: ... here.
* sysdeps/generic/single-thread.h: New file.
* sysdeps/unix/sysdep.h: Include single-thread.h.
* sysdeps/unix/sysv/linux/futex-internal.h: Include sysdep-cancel.h.
* sysdeps/unix/sysv/linux/lowlevellock-futex.h: Likewise.
Mike FABIAN [Wed, 8 May 2019 05:54:15 +0000 (07:54 +0200)]
Bug 24535: Update to Unicode 12.1.0
Unicode 12.1.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 12.1.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Some info about the number of characters added or changed:
Total added characters in newly generated CHARMAP: 1
added: <U32FF> /xe3/x8b/xbf SQUARE ERA NAME REIWA
Total added characters in newly generated WIDTH: 1
added: <U32FF> 2 : eaw=W category=So bidi=L name=SQUARE ERA NAME REIWA
graph: Added 1 characters in new ctype which were not in old ctype
graph: Added: ㋿ U+32FF SQUARE ERA NAME REIWA
print: Added 1 characters in new ctype which were not in old ctype
print: Added: ㋿ U+32FF SQUARE ERA NAME REIWA
punct: Added 1 characters in new ctype which were not in old ctype
punct: Added: ㋿ U+32FF SQUARE ERA NAME REIWA
Wilco Dijkstra [Fri, 10 May 2019 15:38:21 +0000 (16:38 +0100)]
Fix tcache count maximum (BZ #24531)
The tcache counts[] array is a char, which has a very small range and thus
may overflow. When setting tcache_count tunable, there is no overflow check.
However the tunable must not be larger than the maximum value of the tcache
counts[] array, otherwise it can overflow when filling the tcache.
[BZ #24531]
* malloc/malloc.c (MAX_TCACHE_COUNT): New define.
(do_set_tcache_count): Only update if count is small enough.
* manual/tunables.texi (glibc.malloc.tcache_count): Document max value.
The patch print timespec members as intmax_t instead of long int.
It avoid the -Werror=format= build issue on x32:
timespec.c: In function 'test_timespec_before_impl':
timespec.c:32:23: error: format '%ld' expects argument of type 'long int',
but argument 4 has type '__time_t' {aka 'const long long int'} [-Werror=format=]
Checked on x86_64-linux-gnu-x32, x86_64-linux-gnu, and i686-linux-gnu.
* support/timespec.c (test_timespec_before_impl,
test_timespec_equal_or_after_impl): print timespec member as intmax_t
insted of long int.
Mike Crowe [Thu, 9 May 2019 17:14:32 +0000 (14:14 -0300)]
nptl: Convert some rwlock tests to use libsupport
Checked on x86_64-linux-gnu and i686-linux-gnu.
* nptl/tst-rwlock6.c: Use libsupport. This also happens to fix a
small bug where only tv.tv_usec was checked which could cause an
erroneous pass if pthread_rwlock_timedrdlock incorrectly took more
than a second.
* nptl/tst-rwlock7.c, nptl/tst-rwlock9.c, nptl/tst-rwlock14.c: Use
libsupport.
Mike Crowe [Thu, 9 May 2019 17:19:21 +0000 (14:19 -0300)]
support: Add timespec.h
It adds useful functions for tests that use struct timespec.
Checked on x86_64-linux-gnu and i686-linux-gnu.
* support/timespec.h: New file. Provide timespec helper functions
along with macros in the style of those in check.h.
* support/timespec.c: New file. Implement check functions declared
in support/timespec.h.
* support/timespec-add.c: New file from gnulib containing
timespec_add implementation that handles overflow.
* support/timespec-sub.c: New file from gnulib containing
timespec_sub implementation that handles overflow.
* support/README: Mention timespec.h.
Szabolcs Nagy [Wed, 8 May 2019 13:50:47 +0000 (14:50 +0100)]
Move nptl/tst-eintr1 to xtests
Don't run nptl/tst-eintr1 by normal make check because it can spuriously
break testing on various linux kernels. (Currently this affects the
aarch64 glibc buildbot machine which regularly fails and loses test
results.)
[BZ #24537]
* nptl/Makefile: Move tst-eintr1 to xtests.
This patches consolidates all the powerpc trunc{f} implementations on
the generic sysdeps/powerpc/fpu/s_trunc{f}. The generic implementation
uses either the compiler builts for ISA 2.03+ (which generates the
frim instruction) or a generic implementation which uses FP only
operations.
The IFUNC organization for powerpc64 is also change to be enabled only
for powerpc64 and not for powerpc64le (since minium ISA of 2.08 does not
require the fallback generic implementation).
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
This patches consolidates all the powerpc round{f} implementations on
the generic sysdeps/powerpc/fpu/s_round{f}. The generic implementation
uses either the compiler builts for ISA 2.03+ (which generates the
frim instruction) or a generic implementation which uses FP only
operations.
The IFUNC organization for powerpc64 is also change to be enabled only
for powerpc64 and not for powerpc64le (since minium ISA of 2.08 does not
require the fallback generic implementation).
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
This patches consolidates all the powerpc floor{f} implementations on
the generic sysdeps/powerpc/fpu/s_floor{f}. The generic implementation
uses either the compiler builts for ISA 2.03+ (which generates the
frim instruction) or a generic implementation which uses FP only
operations.
The IFUNC organization for powerpc64 is also change to be enabled only
for powerpc64 and not for powerpc64le (since minium ISA of 2.08 does not
require the fallback generic implementation).
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
Mike Crowe [Wed, 8 May 2019 14:58:17 +0000 (16:58 +0200)]
support: Add xclock_gettime
* support/xclock_gettime.c (xclock_gettime): New file. Provide
clock_gettime wrapper for use in tests that fails the test rather
than returning failure.
* support/xtime.h: New file to declare xclock_gettime.
Linux 5.1 headers are not in fact usable for glibc testing, because
"[PATCH] uapi: avoid namespace conflict in linux/posix_types.h"
<https://lore.kernel.org/lkml/20190319165123.3967889-1-arnd@arndb.de/>
did not get merged for 5.1 and so many conform/ tests fail.
The performance improvement is about 20%-30% for
larger cases and about 1%-5% for smaller cases.
Used SIMD load/store instead of GPR for large
overlapping forward moves.
Reused existing memcpy implementation for smaller
or overlapping backward moves.
Fixed the existing memcpy implementation to allow it
to deal with the overlapping case.
Simplified loop tails in the memcpy implementation -
use branchless overlapping sequence of fixed length
load/stores instead of branching depending on the
size.
A cleanup/optimization converting str's to stp's.
Added __memmove_thunderx2 to the list of the
available implementations.
elf: Fix elf/tst-pldd with --enable-hardcoded-path-in-tests (BZ#24506)
The elf/tst-pldd (added by 1a4c27355e146 to fix BZ#18035) test does
not expect the hardcoded paths that are output by pldd when the test
is built with --enable-hardcoded-path-in-tests. Instead of showing
the ABI installed library names for loader and libc (such as
ld-linux-x86-64.so.2 and libc.so.6 for x86_64), pldd shows the default
built ld.so and libc.so.
It makes the tests fail with an invalid expected loader/libc name.
This patch fixes the elf-pldd test by adding the canonical ld.so and
libc.so names in the expected list of possible outputs when parsing
the result output from pldd. The test now handles both default
build and --enable-hardcoded-path-in-tests option.
Checked on x86_64-linux-gnu (built with and without
--enable-hardcoded-path-in-tests) and i686-linux-gnu.
* elf/tst-pldd.c (in_str_list): New function.
(do_test): Add default names for ld and libc as one option.
Paul Eggert [Mon, 18 Mar 2019 21:14:15 +0000 (14:14 -0700)]
Make mktime etc. compatible with __time64_t
Keep these functions compatible with Gnulib while adding
__time64_t support. The basic idea is to move private API
declarations from include/time.h to time/mktime-internal.h, since
the former file cannot easily be shared with Gnulib whereas the
latter can.
Also, do some other minor cleanup while in the neighborhood.
* include/time.h: Include stdbool.h, time/mktime-internal.h.
(__mktime_internal): Move this prototype to time/mktime-internal.h,
since Gnulib needs it.
(__localtime64_r, __gmtime64_r) [__TIMESIZE == 64]:
Move these macros to time/mktime-internal.h, since Gnulib needs them.
(__mktime64, __timegm64) [__TIMESIZE != 64]: New prototypes.
(in_time_t_range): New static function.
* posix/bits/types.h (__time64_t) [__TIMESIZE == 64 && !defined __LIBC]:
Do not define as a macro in this case, so that portable code is
less tempted to use __time64_t.
* time/mktime-internal.h: Rewrite so that it does both glibc
and Gnulib work. Include time.h if not _LIBC.
(mktime_offset_t) [!_LIBC]: Define for gnulib.
(__time64_t, __gmtime64_r, __localtime64_r, __mktime64, __timegm64)
[!_LIBC || __TIMESIZE == 64]: New macros, mostly moved here
from include/time.h.
(__gmtime_r, __localtime_r, __mktime_internal) [!_LIBC]:
New macros, taken from GNulib.
(__mktime_internal): New prototype, moved here from include/time.h.
* time/mktime.c (mktime_min, mktime_max, convert_time)
(ranged_convert, __mktime_internal, __mktime64):
* time/timegm.c (__timegm64):
Use __time64_t, not time_t.
* time/mktime.c: Stop worrying about whether time_t is floating-point.
(__mktime64) [! (_LIBC && __TIMESIZE != 64)]:
Rename from mktime.
(mktime) [_LIBC && __TIMESIZE != 64]: New function.
* time/timegm.c [!_LIBC]: Include libc-config.h, not config.h,
for libc_hidden_def.
Include errno.h.
(__timegm64) [! (_LIBC && __TIMESIZE != 64)]:
Rename from timegm.
(timegm) [_LIBC && __TIMESIZE != 64]: New function.
Fix -O1 compilation errors with `__ddivl' and `__fdivl' [BZ #19444]
Complementing commit 4a06ceea33ec ("sysdeps/ieee754/soft-fp: ignore
maybe-uninitialized with -O [BZ #19444]") and commit 27c5e756a2a8
("sysdeps/ieee754: prevent maybe-uninitialized errors with -O [BZ
#19444]") also fix compilation errors observed at -O1 in `__ddivl' and
`__fdivl' with GCC 9 and RISC-V targets:
In file included from ../soft-fp/soft-fp.h:318,
from ../sysdeps/ieee754/soft-fp/s_fdivl.c:27:
../sysdeps/ieee754/soft-fp/s_fdivl.c: In function '__fdivl':
../soft-fp/op-2.h:108:9: error: 'R_f1' may be used uninitialized in this function [-Werror=maybe-uninitialized]
108 | : (X##_f1 << (2*_FP_W_TYPE_SIZE - (N)))) \
| ^
../sysdeps/ieee754/soft-fp/s_fdivl.c:37:14: note: 'R_f1' was declared here
37 | FP_DECL_Q (R);
| ^
../soft-fp/op-common.h:39:3: note: in expansion of macro '_FP_FRAC_DECL_2'
39 | _FP_FRAC_DECL_##wc (X)
| ^~~~~~~~~~~~~~
../soft-fp/quad.h:226:24: note: in expansion of macro '_FP_DECL'
226 | # define FP_DECL_Q(X) _FP_DECL (2, X)
| ^~~~~~~~
../sysdeps/ieee754/soft-fp/s_fdivl.c:37:3: note: in expansion of macro 'FP_DECL_Q'
37 | FP_DECL_Q (R);
| ^~~~~~~~~
../soft-fp/op-2.h:109:8: error: 'R_f0' may be used uninitialized in this function [-Werror=maybe-uninitialized]
109 | | X##_f0) != 0)); \
| ^
../sysdeps/ieee754/soft-fp/s_fdivl.c:37:14: note: 'R_f0' was declared here
37 | FP_DECL_Q (R);
| ^
../soft-fp/op-common.h:39:3: note: in expansion of macro '_FP_FRAC_DECL_2'
39 | _FP_FRAC_DECL_##wc (X)
| ^~~~~~~~~~~~~~
../soft-fp/quad.h:226:24: note: in expansion of macro '_FP_DECL'
226 | # define FP_DECL_Q(X) _FP_DECL (2, X)
| ^~~~~~~~
../sysdeps/ieee754/soft-fp/s_fdivl.c:37:3: note: in expansion of macro 'FP_DECL_Q'
37 | FP_DECL_Q (R);
| ^~~~~~~~~
In file included from ../soft-fp/soft-fp.h:318,
from ../sysdeps/ieee754/soft-fp/s_ddivl.c:31:
../sysdeps/ieee754/soft-fp/s_ddivl.c: In function '__ddivl':
../soft-fp/op-2.h:98:25: error: 'R_f1' may be used uninitialized in this function [-Werror=maybe-uninitialized]
98 | X##_f0 = (X##_f1 << (_FP_W_TYPE_SIZE - (N)) | X##_f0 >> (N) \
| ^~
../sysdeps/ieee754/soft-fp/s_ddivl.c:41:14: note: 'R_f1' was declared here
41 | FP_DECL_Q (R);
| ^
../soft-fp/op-2.h:37:36: note: in definition of macro '_FP_FRAC_DECL_2'
37 | _FP_W_TYPE X##_f0 _FP_ZERO_INIT, X##_f1 _FP_ZERO_INIT
| ^
../soft-fp/quad.h:226:24: note: in expansion of macro '_FP_DECL'
226 | # define FP_DECL_Q(X) _FP_DECL (2, X)
| ^~~~~~~~
../sysdeps/ieee754/soft-fp/s_ddivl.c:41:3: note: in expansion of macro 'FP_DECL_Q'
41 | FP_DECL_Q (R);
| ^~~~~~~~~
../soft-fp/op-2.h:101:17: error: 'R_f0' may be used uninitialized in this function [-Werror=maybe-uninitialized]
101 | : (X##_f0 << (_FP_W_TYPE_SIZE - (N))) != 0)); \
| ^~
../sysdeps/ieee754/soft-fp/s_ddivl.c:41:14: note: 'R_f0' was declared here
41 | FP_DECL_Q (R);
| ^
../soft-fp/op-2.h:37:14: note: in definition of macro '_FP_FRAC_DECL_2'
37 | _FP_W_TYPE X##_f0 _FP_ZERO_INIT, X##_f1 _FP_ZERO_INIT
| ^
../soft-fp/quad.h:226:24: note: in expansion of macro '_FP_DECL'
226 | # define FP_DECL_Q(X) _FP_DECL (2, X)
| ^~~~~~~~
../sysdeps/ieee754/soft-fp/s_ddivl.c:41:3: note: in expansion of macro 'FP_DECL_Q'
41 | FP_DECL_Q (R);
| ^~~~~~~~~
cc1: all warnings being treated as errors
make[2]: *** [.../sysd-rules:587: .../math/s_fdivl.o] Error 1
make[2]: *** Waiting for unfinished jobs....
cc1: all warnings being treated as errors
make[2]: *** [.../sysd-rules:587: .../math/s_ddivl.o] Error 1
This comes from cases in _FP_DIV that return a result described as
FP_CLS_ZERO or FP_CLS_INF and do not initialize the fractional part,
which is then operated on unconditionally in FP_TRUNC_COOKED before
being ignored by _FP_PACK_CANONICAL.
Clearly at this optimization level GCC cannot guarantee to be able to
determine that the fractional part is ultimately unused, so ignore the
error as with the earlier commits referred, letting compilation proceed.
This patches consolidates all the powerpc ceil{f} implementations on
the generic sysdeps/powerpc/fpu/s_ceil{f}. The generic implementation
uses either the compiler builts for ISA 2.03+ (which generates the frip
instruction) or a generic implementation which uses FP only operations.
It adds a generic implementation (round_to_integer.h) which is shared
with other rounding to integer routines. The resulting code should be
similar in term os performance to previous assembly one.
The IFUNC organization for powerpc64 is also change to be enabled only
for powerpc64 and not for powerpc64le (since minium ISA of 2.08 does not
require the fallback generic implementation).
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
This patch removes the POWER4 optimized mpa optimization used currently
on all powerpc targets. In fact for newer chips, GCC generates *worse*
code than generic implementation as below. One possibilty would to
add ifunc variants for the mpa routines (as x86_64), but it will add
complexity only for older chips (and one would need to check if
power5, power5+, and power6 do benefict from this optimization),
and only for specific implementation (since most used one such
as sin, cos, exp, pow where optimized to avoid calling the slow
multiprecision path).
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
Except the following functions, NPTL implementation assume sem_t
argument (or other arguments) are not NULL, so they would benefit
from having the nonnull attribute.
- sem_close(): can cope with a NULL sem_t and return -1 with error EINVAL;
- sem_destroy(): does nothing at all
Makeconfig: Move -Wl,-rpath-link options before library references
Previously, the -Wl,-rpath-link options came after the libraries
injected using LDLIBS-* variables on the link editor command line for
main programs. As a result, it could happen that installed libraries
that reference glibc libraries used the installed glibc from the system
directories, instead of the glibc from the build tree. This can lead to
link failures if the wrong version of libpthread.so.0 is used, for
instance, due to differences in the internal GLIBC_PRIVATE interfaces,
as seen with memusagestat and -lgd after commit f9b645b4b0a10c43753296ce3fa40053fa44606a ("memusagestat: use local glibc
when linking [BZ #18465]").
The isolation is necessarily imperfect because these installed
libraries are linked against the installed glibc in the system
directories. However, in most cases, the built glibc will be newer
than the installed glibc, and this link is permitted because of the
ABI backwards compatibility glibc provides.
This change is needed to add linker flags which come very early in the
command linke (before LDFLAGS) and are not applied to test programs
(only to installed programs).
While working on enabling D front-end (GDC) in GCC we noticed that
druntime was segfaulting if it is linked dynamically. This was tracked
to DL_RO_DYN_SECTION.
DL_RO_DYN_SECTION lines seem to be copied from MIPS file (which is the
only user of it), but the comment doesn't apply to RISC-V. There is no
such requirement in RISC-V ABI.
[BZ#24484]
* sysdeps/riscv/ldsodefs.h: Remove DL_RO_DYN_SECTION as it is not
required by RISC-V ABI.
Extend BIND_NOW to installed programs with --enable-bind-now
Commit 2d6ab5df3b675e96ee587ae6a8c2ce004c6b1ba9 ("Document and fix
--enable-bind-now [BZ #21015]") extended BIND_NOW to all installed
shared objects. This change also covers installed programs.
Reduce the total time taken by benchtests. The malloc thread test takes 4
minutes to run which is significantly more than most other tests. Reduce
this to a more reasonable 40 seconds. The math tests take 10 seconds each,
eventhough all they do is loop on the same input. Anything more than 1
second runtime is way overkill, so set the limit to 1 second.
* benchtests/Makefile (BENCH_DURATION): Set to 1 second.
* benchtests/bench-malloc-thread.c (BENCH_DURATION): Set to 10 seconds.
Mike Frysinger [Wed, 24 Apr 2019 11:32:22 +0000 (13:32 +0200)]
memusagestat: use local glibc when linking [BZ #18465]
The memusagestat is the only binary that has its own link line which
causes it to be linked against the existing installed C library. It
has been this way since it was originally committed in 1999, but I
don't see any reason as to why. Since we want all the programs we
build locally to be against the new copy of glibc, change the build
to be like all other programs.
Since 9182aa67994 (Fix vDSO l_name for GDB's, BZ#387) the initial link_map
for executable itself and loader will have both l_name and l_libname->name
holding the same value due:
Since the value at ln.name (l_libname->name) will be the same as previously
read. The straightforward fix is just avoid the check and read the new list
entry.
I checked also against binaries issues with old loaders with fix for BZ#387,
and pldd could dump the shared objects.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, and
powerpc64le-linux-gnu.
[BZ #18035]
* elf/Makefile (tests-container): Add tst-pldd.
* elf/pldd-xx.c: Use _Static_assert in of pldd_assert.
(E(find_maps)): Avoid use alloca, use default read file operations
instead of explicit LFS names, and fix infinite loop.
* elf/pldd.c: Explicit set _FILE_OFFSET_BITS, cleanup headers.
(get_process_info): Use _Static_assert instead of assert, use default
directory operations instead of explicit LFS names, and free some
leadek pointers.
* elf/tst-pldd.c: New file.
malloc: make malloc fail with requests larger than PTRDIFF_MAX (BZ#23741)
As discussed previously on libc-alpha [1], this patch follows up the idea
and add both the __attribute_alloc_size__ on malloc functions (malloc,
calloc, realloc, reallocarray, valloc, pvalloc, and memalign) and limit
maximum requested allocation size to up PTRDIFF_MAX (taking into
consideration internal padding and alignment).
This aligns glibc with gcc expected size defined by default warning
-Walloc-size-larger-than value which warns for allocation larger than
PTRDIFF_MAX. It also aligns with gcc expectation regarding libc and
expected size, such as described in PR#67999 [2] and previously discussed
ISO C11 issues [3] on libc-alpha.
From the RFC thread [4] and previous discussion, it seems that consensus
is only to limit such requested size for malloc functions, not the system
allocation one (mmap, sbrk, etc.).
The implementation changes checked_request2size to check for both overflow
and maximum object size up to PTRDIFF_MAX. No additional checks are done
on sysmalloc, so it can still issue mmap with values larger than
PTRDIFF_T depending on the requested size.
The __attribute_alloc_size__ is for functions that return a pointer only,
which means it cannot be applied to posix_memalign (see remarks in GCC
PR#87683 [5]). The runtimes checks to limit maximum requested allocation
size does applies to posix_memalign.
[BZ #23741]
* malloc/hooks.c (malloc_check, realloc_check): Use
__builtin_add_overflow on overflow check and adapt to
checked_request2size change.
* malloc/malloc.c (__libc_malloc, __libc_realloc, _mid_memalign,
__libc_pvalloc, __libc_calloc, _int_memalign): Limit maximum
allocation size to PTRDIFF_MAX.
(REQUEST_OUT_OF_RANGE): Remove macro.
(checked_request2size): Change to inline function and limit maximum
requested size to PTRDIFF_MAX.
(__libc_malloc, __libc_realloc, _int_malloc, _int_memalign): Limit
maximum allocation size to PTRDIFF_MAX.
(_mid_memalign): Use _int_memalign call for overflow check.
(__libc_pvalloc): Use __builtin_add_overflow on overflow check.
(__libc_calloc): Use __builtin_mul_overflow for overflow check and
limit maximum requested size to PTRDIFF_MAX.
* malloc/malloc.h (malloc, calloc, realloc, reallocarray, memalign,
valloc, pvalloc): Add __attribute_alloc_size__.
* stdlib/stdlib.h (malloc, realloc, reallocarray, valloc): Likewise.
* malloc/tst-malloc-too-large.c (do_test): Add check for allocation
larger than PTRDIFF_MAX.
* malloc/tst-memalign.c (do_test): Disable -Walloc-size-larger-than=
around tests of malloc with negative sizes.
* malloc/tst-posix_memalign.c (do_test): Likewise.
* malloc/tst-pvalloc.c (do_test): Likewise.
* malloc/tst-valloc.c (do_test): Likewise.
* malloc/tst-reallocarray.c (do_test): Replace call to reallocarray
with resulting size allocation larger than PTRDIFF_MAX with
reallocarray_nowarn.
(reallocarray_nowarn): New function.
* NEWS: Mention the malloc function semantic change.
This patch just refactor the assembly implementation to use compiler
builtins instead.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
Since be2e25bbd78f9fdf the generic ieee754 implementation uses
compiler builtin which generates fabs{f} for all supported targets.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
mips: Remove rt_sigreturn usage on context function
Similar to powerpc, mips also issues rt_sigreturn for setcontext
case the v0 value saved is not the one set by setcontext or
makecontext. As for powerpc, it is intention is no really supported
since setcontext is not async-signal-safe.
Checked the context tests on mips64-linux-gnu and mips-linux-gnu.
powerpc: Remove rt_sigreturn usage on context function
As described in a recent glibc thread [1], the rt_sigreturn syscall
on setcontext and swapcontext is not used on default use and its
intention is no really supported since neither setcontext nor
swapcontext are async-signal-safe.
Checked on powerpc64-linux-gnu and powerpc-linux-gnu.
Its API is similar to support_capture_subprocess, but rather creates a
new process based on the input path and arguments. Under the hoods it
uses posix_spawn to create the new process.
It also allows the use of other support_capture_* functions to check
for expected results and free the resources.
Checked on x86_64-linux-gnu.
* support/Makefile (libsupport-routines): Add support_subprocess,
xposix_spawn, xposix_spawn_file_actions_addclose, and
xposix_spawn_file_actions_adddup2.
(tst-support_capture_subprocess-ARGS): New rule.
* support/capture_subprocess.h (support_capture_subprogram): New
prototype.
* support/support_capture_subprocess.c (support_capture_subprocess):
Refactor to use support_subprocess and support_capture_poll.
(support_capture_subprogram): New function.
* support/tst-support_capture_subprocess.c (write_mode_to_str,
str_to_write_mode, test_common, parse_int, handle_restart,
do_subprocess, do_subprogram, do_multiple_tests): New functions.
(do_test): Add support_capture_subprogram tests.
* support/subprocess.h: New file.
* support/support_subprocess.c: Likewise.
* support/xposix_spawn.c: Likewise.
* support/xposix_spawn_file_actions_addclose.c: Likewise.
* support/xposix_spawn_file_actions_adddup2.c: Likewise.
* support/xspawn.h: Likewise.
Mike Gerow [Wed, 17 Apr 2019 09:45:34 +0000 (11:45 +0200)]
stdlib/tst-secure-getenv: handle >64 groups
This test would fail unnecessarily if the user running it had more than
64 groups since getgroups returns EINVAL if the size provided is less
than the number of supplementary group IDs. Instead dynamically
determine the number of supplementary groups the user has.
nss_dns: Do not replace root domain with empty string
The purpose of the bp[0] == '.' check is unclear. Only the root domain
starts with '.'. The empty string is accepted as a domain name in many
places, denoting the root, but using it implicitly is confusing.
alloc_buffer: Return unqualified pointer type in alloc_buffer_next
alloc_buffer_next is useful for peeking to the remaining part of the
buffer and update it, with subsequent allocation (once the length
is known) using alloc_buffer_alloc_bytes. This is not as robust
as the other interfaces, but it allows using alloc_buffer with
string-writing interfaces such as snprintf and ns_name_ntop.
Carlos O'Donell [Mon, 8 Apr 2019 21:35:05 +0000 (17:35 -0400)]
malloc: Set and reset all hooks for tracing (Bug 16573)
If an error occurs during the tracing operation, particularly during a
call to lock_and_info() which calls _dl_addr, we may end up calling back
into the malloc-subsystem and relock the loader lock and deadlock. For
all intents and purposes the call to _dl_addr can call any of the malloc
family API functions and so we should disable all tracing before calling
such loader functions. This is similar to the strategy that the new
malloc tracer takes when calling the real malloc, namely that all
tracing ceases at the boundary to the real function and any faults at
that point are the purvue of the library (though the new tracer does
this on a per-thread basis in an MT-safe fashion). Since the new tracer
and the hook deprecation are not yet complete we must fix these issues
where we can.
Tested on x86_64 with no regressions.
Co-authored-by: Kwok Cheung Yeung <kcy@codesourcery.com> Reviewed-by: DJ Delorie <dj@redhat.com>
Replace slow byte-oriented tests in several string benchmarks with the
generic implementations from the string/ directory so the comparisons
are more realistic and useful.
* benchtests/bench-stpcpy.c (SIMPLE_STPCPY): Remove function.
(generic_stpcpy): New function.
* benchtests/bench-stpncpy.c (SIMPLE_STPNCPY): Remove function.
(generic_stpncpy): New function.
* benchtests/bench-strcat.c (SIMPLE_STRCAT): Remove function.
(generic_strcat): New function.
* benchtests/bench-strcpy.c (SIMPLE_STRCPY): Remove function.
(generic_strcpy): New function.
* benchtests/bench-strncat.c (SIMPLE_STRNCAT): Remove function.
(STUPID_STRNCAT): Remove function.
(generic_strncat): New function.
* benchtests/bench-strncpy.c (SIMPLE_STRNCPY): Remove function.
(STUPID_STRNCPY): Remove function.
(generic_strncpy): New function.
* benchtests/bench-strnlen.c (SIMPLE_STRNLEN): Remove function.
(generic_strnlen): New function.
(memchr_strnlen): New function.
* benchtests/bench-strlen.c (generic_strlen): Define for WIDE.
(memchr_strlen): Likewise.
Improve bench-strstr by using an extract from the manual as the input
to make the test more realistic. Use the same input for both found and
fail cases rather than using a memset of '0' for most of the string,
which measures performance of strchr rather than strstr. Add result
checking to catch potential errors. Remove the repeated tests at slightly
different alignments and add more large needle and haystack testcases.
Replace stupid_strstr with an efficient basic implementation. Add the
Two-way implementation to simplify comparisons with much faster generic
implementations.
* benchtests/bench-strstr.c (input): Add realistic input text.
(stupid_strstr): Remove function.
(basic_strstr): Add function.
(twoway_strstr): Add function.
(do_one_test): Add result checking.
(do_test): Use new input text. Remove accidental early matches.
(test_main): Improve range of tests, reduce unaligned cases.
Improve bench-memmem by replacing simple_memmem with a more efficient
implementation. Add the Two-way implementation to enable direct comparison
with the optimized memmem.
resolv: Remove support for RES_USE_INET6 and the inet6 option
This functionality was deprecated in glibc 2.25.
This commit only includes the core changes to remove the
functionality. It does not remove the RES_USE_INET6 handling in the
individual NSS service modules and the res_use_inet6 function.
These changes will happen in future commits.
aarch64: thunderx2 memcpy implementation cleanup and streamlining
Here is the updated patch for improving the long unaligned
code path (the one using "ext" instruction).
1. Always taken conditional branch at the beginning is
removed.
2. Epilogue code is placed after the end of the loop to
reduce the number of branches.
3. The redundant "mov" instructions inside the loop are
gone due to the changed order of the registers in the "ext"
instructions inside the loop, the prologue has additional
"ext" instruction.
4.Updating count in the prologue was hoisted out as
it is the same update for each prologue.
5. Invariant code of the loop epilogue was hoisted out.
6. As the current size of the ext chunk is exactly 16
instructions long "nop" was added at the beginning
of the code sequence so that the loop entry for all the
chunks be aligned.
* sysdeps/aarch64/multiarch/memcpy_thunderx2.S: Cleanup branching
and remove redundant code.
This patch removes the power6 wcsrchr optimization and uses generic
implementation instead. Currently, both power6 and power7 IFUNC variant
resulting binary are essentially the same and the generic implementation
with unrolling loop set to 8 also results in similar performance.
This patch removes the power6 wcschr optimization and uses generic
implementation instead. Currently, both power6 and power7 IFUNC variant
resulting binary are essentially the same and the generic implementation
with unrolling loop set to 8 also results in similar performance.
This patch removes the power6 wcscpy optimization and uses generic
implementation instead. Currently, both power6 and power7 IFUNC variant
resulting binary are essentially the same and the generic implementation
with unrolling loop set to 8 also results in similar performance.
DJ Delorie [Wed, 3 Apr 2019 21:49:43 +0000 (17:49 -0400)]
time/tst-strftime3.c: Disable snprintf warning.
snprintf will only truncate the output if the data its given
is corrupted, but a truncated buffer will not match the
"pristine" data's buffer, which is all we need. So just
disable the warning via the DIAG macros.
ja_JP locale: Add entry for the new Japanese era [BZ #22964]
The Japanese era name will be changed on May 1, 2019. The Japanese
government made a preliminary announcement on April 1, 2019.
The glibc ja_JP locale must be updated to include the new era name for
strftime's alternative year format support.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
ChangeLog:
[BZ #22964]
* localedata/locales/ja_JP (LC_TIME): Add entry for the new Japanese
era.
* time/tst-strftime2.c (dates): Add 2019-04-30 and 2019-05-01.
(mkreftable): Add rules for the new Japanese era and the new dates.
Co-authored-by: Rafal Luzynski <digitalfreak@lingonborough.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
ChangeLog:
[BZ #24293]
* time/Makefile (LOCALES): Add zh_TW.UTF-8, cmn_TW.UTF-8,
hak_TW.UTF-8, nan_TW.UTF-8, and lzh_TW.UTF-8.
* time/tst-strftime2.c (locales): Likewise.
(dates): Add 1910-04-01, 1911-12-31, 1912-01-01, 1913-04-01,
2010-04-01, and 2011-04-01.
(mkreftable): Add rules for the new locales and the new dates.
time/tst-strftime2.c: Make the file easier to maintain
Express the years as full Gregorian years (e.g., 1988 instead of 88)
and months with natural numbers (1-12 rather than 0-11).
Compare actual dates rather than indexes when selecting the era name.
Declare the local variable era as a string character pointer rather
than an array of chars where the actual string is copied which might
lead to potential buffer overflows in future.
Co-authored-by: Rafal Luzynski <digitalfreak@lingonborough.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
ChangeLog:
* time/tst-strftime2.c (date_t): Explicitly define the type.
(dates): Use natural month and year numbers to express a date.
(is_before): New function to compare dates.
(mkreftable): Minor improvements to simplify maintenance.
(do_test): Reflect the changes in dates array.
DJ Delorie [Wed, 27 Mar 2019 21:44:51 +0000 (17:44 -0400)]
Fix strptime era handling, add more strftime tests [BZ #24394]
Test the transition points between all the currently listed Japanese
era name changes. This includes testing the transition between the
first year date and the second year date. This test will help test
the upcoming Japanese era name change.
Also fixes a fencepost error where the era name isn't properly parsed
by strptime in the last (partial) year of the era.
Example: if an era change happens in Feb 1990, and again in Aug 1995,
that's 5.5 years long, but the 0.5 year wasn't accounted for.
alpha: Improve sysdeps/alpha/divqu.S and sysdeps/alpha/remqu.S
* sysdeps/alpha/divqu.S (__divqu): Move save of $f0 and excb after
conditional branch to DIVBYZERO. Fix unwind info.
* sysdeps/alpha/remqu.S (__remqu): Move saves of $f0, $f1, $f2 and
excb after conditional branch to $powerof2. Add missing unop
instructions and .align directives and reorder instructions to
match __divqu.
alpha: Do not redefine __NR_shmat or __NR_osf_shmat
Fixes build using v5.1-rc1 headers.
The kernel has cleaned up how these are defined. Previous behavior
was to define __NR_osf_shmat as 209 and not define __NR_shmat.
Current behavior is to define __NR_shmat as 209 and then define
__NR_osf_shmat as __NR_shmat.
* sysdeps/unix/sysv/linux/alpha/kernel-features.h (__NR_shmat):
Do not redefine.
* sysdeps/unix/sysv/linux/alpha/sysdep.h (__NR_osf_shmat):
Do not redefine.
RISC-V: Fix `test' operand error with soft-float ABI being configured
Fix a:
.../sysdeps/unix/sysv/linux/riscv/configure: line 181: test: =: unary operator expected
message produced by the RISC-V configure fragment with the soft-float
ABI selected, caused by $libc_cv_riscv_float_abi evaluating to nil in
the invocation of `test $libc_cv_riscv_float_abi = no'.
* sysdeps/unix/sysv/linux/riscv/configure.ac: Quote
$libc_cv_riscv_float_abi in `test' invocation.
* sysdeps/unix/sysv/linux/riscv/configure: Regenerate.
Paul A. Clarke [Sat, 30 Mar 2019 00:16:34 +0000 (19:16 -0500)]
[powerpc] Use __builtin_{mffs,mtfsf}
Replace inline asm uses of the "mffs" and "mtfsf" instructions with
the analogous GCC builtins.
__builtin_mffs and __builtin_mtfsf are both available in GCC 5 and above.
Given the minimum GCC level for GLibC is now GCC 6.2, it is safe to use
these builtins without restriction.
projects / thirdparty / glibc.git / log
