Florian Weimer [Wed, 27 Jan 2021 12:36:12 +0000 (13:36 +0100)]
gconv: Fix assertion failure in ISO-2022-JP-3 module (bug 27256)
The conversion loop to the internal encoding does not follow
the interface contract that __GCONV_FULL_OUTPUT is only returned
after the internal wchar_t buffer has been filled completely. This
is enforced by the first of the two asserts in iconv/skeleton.c:
/* We must run out of output buffer space in this
rerun. */
assert (outbuf == outerr);
assert (nstatus == __GCONV_FULL_OUTPUT);
This commit solves this issue by queuing a second wide character
which cannot be written immediately in the state variable, like
other converters already do (e.g., BIG5-HKSCS or TSCII).
H.J. Lu [Mon, 28 Dec 2020 13:28:49 +0000 (05:28 -0800)]
x86: Check IFUNC definition in unrelocated executable [BZ #20019]
Calling an IFUNC function defined in unrelocated executable also leads to
segfault. Issue a fatal error message when calling IFUNC function defined
in the unrelocated executable from a shared library.
On x86, ifuncmain6pie failed with:
[hjl@gnu-cfl-2 build-i686-linux]$ ./elf/ifuncmain6pie --direct
./elf/ifuncmain6pie: IFUNC symbol 'foo' referenced in '/export/build/gnu/tools-build/glibc-32bit/build-i686-linux/elf/ifuncmod6.so' is defined in the executable and creates an unsatisfiable circular dependency.
[hjl@gnu-cfl-2 build-i686-linux]$ readelf -rW elf/ifuncmod6.so | grep foo 00003ff400000706 R_386_GLOB_DAT 0000400c foo_ptr 00003ff800000406 R_386_GLOB_DAT 00000000 foo 0000400c00000401 R_386_32 00000000 foo
[hjl@gnu-cfl-2 build-i686-linux]$
Remove non-JUMP_SLOT relocations against foo in ifuncmod6.so, which
trigger the circular IFUNC dependency, and build ifuncmain6pie with
-Wl,-z,lazy.
H.J. Lu [Tue, 12 Jan 2021 13:15:49 +0000 (05:15 -0800)]
x86-64: Avoid rep movsb with short distance [BZ #27130]
When copying with "rep movsb", if the distance between source and
destination is N*4GB + [1..63] with N >= 0, performance may be very
slow. This patch updates memmove-vec-unaligned-erms.S for AVX and
AVX512 versions with the distance in RCX:
cmpl $63, %ecx
// Don't use "rep movsb" if ECX <= 63
jbe L(Don't use rep movsb")
Use "rep movsb"
Benchtests data with bench-memcpy, bench-memcpy-large, bench-memcpy-random
and bench-memcpy-walk on Skylake, Ice Lake and Tiger Lake show that its
performance impact is within noise range as "rep movsb" is only used for
data size >= 4KB.
The variant PCS support was ineffective because in the common case
linkmap->l_mach.plt == 0 but then the symbol table flags were ignored
and normal lazy binding was used instead of resolving the relocs early.
(This was a misunderstanding about how GOT[1] is setup by the linker.)
In practice this mainly affects SVE calls when the vector length is
more than 128 bits, then the top bits of the argument registers get
clobbered during lazy binding.
Wilco Dijkstra [Wed, 11 Mar 2020 17:15:25 +0000 (17:15 +0000)]
[AArch64] Improve integer memcpy
Further optimize integer memcpy. Small cases now include copies up
to 32 bytes. 64-128 byte copies are split into two cases to improve
performance of 64-96 byte copies. Comments have been rewritten.
Krzysztof Koch [Tue, 5 Nov 2019 17:35:18 +0000 (17:35 +0000)]
aarch64: Increase small and medium cases for __memcpy_generic
Increase the upper bound on medium cases from 96 to 128 bytes.
Now, up to 128 bytes are copied unrolled.
Increase the upper bound on small cases from 16 to 32 bytes so that
copies of 17-32 bytes are not impacted by the larger medium case.
Benchmarking:
The attached figures show relative timing difference with respect
to 'memcpy_generic', which is the existing implementation.
'memcpy_med_128' denotes the the version of memcpy_generic with
only the medium case enlarged. The 'memcpy_med_128_small_32' numbers
are for the version of memcpy_generic submitted in this patch, which
has both medium and small cases enlarged. The figures were generated
using the script from:
https://www.sourceware.org/ml/libc-alpha/2019-10/msg00563.html
Depending on the platform, the performance improvement in the
bench-memcpy-random.c benchmark ranges from 6% to 20% between
the original and final version of memcpy.S
Tested against GLIBC testsuite and randomized tests.
Wilco Dijkstra [Fri, 28 Aug 2020 16:51:40 +0000 (17:51 +0100)]
AArch64: Improve backwards memmove performance
On some microarchitectures performance of the backwards memmove improves if
the stores use STR with decreasing addresses. So change the memmove loop
in memcpy_advsimd.S to use 2x STR rather than STP.
Add a new memcpy using 128-bit Q registers - this is faster on modern
cores and reduces codesize. Similar to the generic memcpy, small cases
include copies up to 32 bytes. 64-128 byte copies are split into two
cases to improve performance of 64-96 byte copies. Large copies align
the source rather than the destination.
bench-memcpy-random is ~9% faster than memcpy_falkor on Neoverse N1,
so make this memcpy the default on N1 (on Centriq it is 15% faster than
memcpy_falkor).
strcmp-avx2.S: In avx2 strncmp function, strings are compared in
chunks of 4 vector size(i.e. 32x4=128 byte for avx2). After first 4
vector size comparison, code must check whether it already passed
the given offset. This patch implement avx2 offset check condition
for strncmp function, if both string compare same for first 4 vector
size.
Andreas Schwab [Mon, 20 Jan 2020 16:01:50 +0000 (17:01 +0100)]
Fix array overflow in backtrace on PowerPC (bug 25423)
When unwinding through a signal frame the backtrace function on PowerPC
didn't check array bounds when storing the frame address. Fixes commit d400dcac5e ("PowerPC: fix backtrace to handle signal trampolines").
Florian Weimer [Thu, 5 Dec 2019 16:29:42 +0000 (17:29 +0100)]
misc/test-errno-linux: Handle EINVAL from quotactl
In commit 3dd4d40b420846dd35869ccc8f8627feef2cff32 ("xfs: Sanity check
flags of Q_XQUOTARM call"), Linux 5.4 added checking for the flags
argument, causing the test to fail due to too restrictive test
expectations.
Kamlesh Kumar [Thu, 5 Dec 2019 15:56:04 +0000 (16:56 +0100)]
<string.h>: Define __CORRECT_ISO_CPP_STRING_H_PROTO for Clang [BZ #25232]
Without the asm redirects, strchr et al. are not const-correct.
libc++ has a wrapper header that works with and without
__CORRECT_ISO_CPP_STRING_H_PROTO (using a Clang extension). But when
Clang is used with libstdc++ or just C headers, the overloaded functions
with the correct types are not declared.
This change does not impact current GCC (with libstdc++ or libc++).
Florian Weimer [Tue, 3 Dec 2019 20:11:32 +0000 (21:11 +0100)]
x86: Assume --enable-cet if GCC defaults to CET [BZ #25225]
This links in CET support if GCC defaults to CET. Otherwise, __CET__
is defined, yet CET functionality is not compiled and linked into the
dynamic loader, resulting in a linker failure due to undefined
references to _dl_cet_check and _dl_open_check.
Florian Weimer [Thu, 28 Nov 2019 13:42:11 +0000 (14:42 +0100)]
libio: Disable vtable validation for pre-2.1 interposed handles [BZ #25203]
Commit c402355dfa7807b8e0adb27c009135a7e2b9f1b0 ("libio: Disable
vtable validation in case of interposition [BZ #23313]") only covered
the interposable glibc 2.1 handles, in libio/stdfiles.c. The
parallel code in libio/oldstdfiles.c needs similar detection logic.
rtld: Check __libc_enable_secure before honoring LD_PREFER_MAP_32BIT_EXEC (CVE-2019-19126) [BZ #25204]
The problem was introduced in glibc 2.23, in commit b9eb92ab05204df772eb4929eccd018637c9f3e9
("Add Prefer_MAP_32BIT_EXEC to map executable pages with MAP_32BIT").
Stefan Liebler [Wed, 6 Feb 2019 08:06:34 +0000 (09:06 +0100)]
Fix alignment of TLS variables for tls variant TLS_TCB_AT_TP [BZ #23403]
The alignment of TLS variables is wrong if accessed from within a thread
for architectures with tls variant TLS_TCB_AT_TP.
For the main thread the static tls data is properly aligned.
For other threads the alignment depends on the alignment of the thread
pointer as the static tls data is located relative to this pointer.
This patch adds this alignment for TLS_TCB_AT_TP variants in the same way
as it is already done for TLS_DTV_AT_TP. The thread pointer is also already
properly aligned if the user provides its own stack for the new thread.
This patch extends the testcase nptl/tst-tls1.c in order to check the
alignment of the tls variables and it adds a pthread_create invocation
with a user provided stack.
The test itself is migrated from test-skeleton.c to test-driver.c
and the missing support functions xpthread_attr_setstack and xposix_memalign
are added.
mips: Force RWX stack for hard-float builds that can run on pre-4.8 kernels
Linux/Mips kernels prior to 4.8 could potentially crash the user
process when doing FPU emulation while running on non-executable
user stack.
Currently, gcc doesn't emit .note.GNU-stack for mips, but that will
change in the future. To ensure that glibc can be used with such
future gcc, without silently resulting in binaries that might crash
in runtime, this patch forces RWX stack for all built objects if
configured to run against minimum kernel version less than 4.8.
* sysdeps/unix/sysv/linux/mips/Makefile
(test-xfail-check-execstack):
Move under mips-has-gnustack != yes.
(CFLAGS-.o*, ASFLAGS-.o*): New rules.
Apply -Wa,-execstack if mips-force-execstack == yes.
* sysdeps/unix/sysv/linux/mips/configure: Regenerated.
* sysdeps/unix/sysv/linux/mips/configure.ac
(mips-force-execstack): New var.
Set to yes for hard-float builds with minimum_kernel < 4.8.0
or minimum_kernel not set at all.
(mips-has-gnustack): New var.
Use value of libc_cv_as_noexecstack
if mips-force-execstack != yes, otherwise set to no.
nss_db allows for getpwent et al to be called without a set*ent,
but it only works once. After the last get*ent a set*ent is
required to restart, because the end*ent did not properly reset
the module. Resetting it to NULL allows for a proper restart.
If the database doesn't exist, however, end*ent erroniously called
munmap which set errno.
The test case runs "makedb" inside the testroot, so needs selinux
DSOs installed.
H.J. Lu [Mon, 1 Jul 2019 19:23:10 +0000 (12:23 -0700)]
Call _dl_open_check after relocation [BZ #24259]
This is a workaround for [BZ #20839] which doesn't remove the NODELETE
object when _dl_open_check throws an exception. Move it after relocation
in dl_open_worker to avoid leaving the NODELETE object mapped without
relocation.
DJ Delorie [Wed, 30 Oct 2019 22:03:14 +0000 (18:03 -0400)]
Base max_fast on alignment, not width, of bins (Bug 24903)
set_max_fast sets the "impossibly small" value based on,
eventually, MALLOC_ALIGNMENT. The comparisons for the smallest
chunk used is, eventually, MIN_CHUNK_SIZE. Note that i386
is the only platform where these are the same, so a smallest
chunk *would* be put in a no-fastbins fastbin.
This change calculates the "impossibly small" value
based on MIN_CHUNK_SIZE instead, so that we can know it will
always be impossibly small.
malloc: Fix missing accounting of top chunk in malloc_info [BZ #24026]
Fixes `<total type="rest" size="..."> incorrectly showing as 0 most
of the time.
The rest value being wrong is significant because to compute the
actual amount of memory handed out via malloc, the user must subtract
it from <system type="current" size="...">. That result being wrong
makes investigating memory fragmentation issues like
<https://bugzilla.redhat.com/show_bug.cgi?id=843478> close to
impossible.
Joseph Myers [Mon, 4 Feb 2019 23:46:58 +0000 (23:46 +0000)]
Fix assertion in malloc.c:tcache_get.
One of the warnings that appears with -Wextra is "ordered comparison
of pointer with integer zero" in malloc.c:tcache_get, for the
assertion:
assert (tcache->entries[tc_idx] > 0);
Indeed, a "> 0" comparison does not make sense for
tcache->entries[tc_idx], which is a pointer. My guess is that
tcache->counts[tc_idx] is what's intended here, and this patch changes
the assertion accordingly.
Tested for x86_64.
* malloc/malloc.c (tcache_get): Compare tcache->counts[tc_idx]
with 0, not tcache->entries[tc_idx].
Wilco Dijkstra [Wed, 12 Jun 2019 10:42:34 +0000 (11:42 +0100)]
Improve performance of memmem
This patch significantly improves performance of memmem using a novel
modified Horspool algorithm. Needles up to size 256 use a bad-character
table indexed by hashed pairs of characters to quickly skip past mismatches.
Long needles use a self-adapting filtering step to avoid comparing the whole
needle repeatedly.
By limiting the needle length to 256, the shift table only requires 8 bits
per entry, lowering preprocessing overhead and minimizing cache effects.
This limit also implies worst-case performance is linear.
Small needles up to size 2 use a dedicated linear search. Very long needles
use the Two-Way algorithm (to avoid increasing stack size or slowing down
the common case, inlining is disabled).
The performance gain is 6.6 times on English text on AArch64 using random
needles with average size 8.
Tested against GLIBC testsuite and randomized tests.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
* string/memmem.c (__memmem): Rewrite to improve performance.
Wilco Dijkstra [Wed, 12 Jun 2019 10:38:52 +0000 (11:38 +0100)]
Improve performance of strstr
This patch significantly improves performance of strstr using a novel
modified Horspool algorithm. Needles up to size 256 use a bad-character
table indexed by hashed pairs of characters to quickly skip past mismatches.
Long needles use a self-adapting filtering step to avoid comparing the whole
needle repeatedly.
By limiting the needle length to 256, the shift table only requires 8 bits
per entry, lowering preprocessing overhead and minimizing cache effects.
This limit also implies worst-case performance is linear.
Small needles up to size 3 use a dedicated linear search. Very long needles
use the Two-Way algorithm.
The performance gain using the improved bench-strstr on Cortex-A72 is 5.8
times basic_strstr and 3.7 times twoway_strstr.
Tested against GLIBC testsuite, randomized tests and the GNULIB strstr test
(https://git.savannah.gnu.org/cgit/gnulib.git/tree/tests/test-strstr.c).
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
* string/str-two-way.h (two_way_short_needle): Add inline to avoid
warning.
(two_way_long_needle): Block inlining.
* string/strstr.c (strstr2): Add new function.
(strstr3): Likewise.
(STRSTR): Completely rewrite strstr to improve performance.
As done in commit 284f42bc778e487dfd5dff5c01959f93b9e0c4f5, memcmp
can be used after memchr to avoid the initialization overhead of the
two-way algorithm for the first match. This has shown improvement
>40% for first match.
Wilco Dijkstra [Fri, 3 Aug 2018 16:24:12 +0000 (17:24 +0100)]
Simplify and speedup strstr/strcasestr first match
Looking at the benchtests, both strstr and strcasestr spend a lot of time
in a slow initialization loop handling one character per iteration.
This can be simplified and use the much faster strlen/strnlen/strchr/memcmp.
Read ahead a few cachelines to reduce the number of strnlen calls, which
improves performance by ~3-4%. This patch improves the time taken for the
full strstr benchtest by >40%.
* string/strcasestr.c (STRCASESTR): Simplify and speedup first match.
* string/strstr.c (AVAILABLE): Likewise.
Wilco Dijkstra [Wed, 19 Dec 2018 18:28:24 +0000 (18:28 +0000)]
[AArch64] Add ifunc support for Ares
Add Ares to the midr_el0 list and support ifunc dispatch. Since Ares
supports 2 128-bit loads/stores, use Neon registers for memcpy by
selecting __memcpy_falkor by default (we should rename this to
__memcpy_simd or similar).
* manual/tunables.texi (glibc.cpu.name): Add ares tunable.
* sysdeps/aarch64/multiarch/memcpy.c (__libc_memcpy): Use
__memcpy_falkor for ares.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.h (IS_ARES):
Add new define.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c (cpu_list):
Add ares cpu.
posix: Fix large mmap64 offset for mips64n32 (BZ#24699)
The fix for BZ#21270 (commit 158d5fa0e19) added a mask to avoid offset larger
than 1^44 to be used along __NR_mmap2. However mips64n32 users __NR_mmap,
as mips64n64, but still defines off_t as old non-LFS type (other ILP32, such
x32, defines off_t being equal to off64_t). This leads to use the same
mask meant only for __NR_mmap2 call for __NR_mmap, thus limiting the maximum
offset it can use with mmap64.
This patch fixes by setting the high mask only for __NR_mmap2 usage. The
posix/tst-mmap-offset.c already tests it and also fails for mips64n32. The
patch also change the test to check for an arch-specific header that defines
the maximum supported offset.
Checked on x86_64-linux-gnu, i686-linux-gnu, and I also tests tst-mmap-offset
on qemu simulated mips64 with kernel 3.2.0 kernel for both mips-linux-gnu and
mips64-n32-linux-gnu.
[BZ #24699]
* posix/tst-mmap-offset.c: Mention BZ #24699.
(do_test_bz21270): Rename to do_test_large_offset and use
mmap64_maximum_offset to check for maximum expected offset value.
* sysdeps/generic/mmap_info.h: New file.
* sysdeps/unix/sysv/linux/mips/mmap_info.h: Likewise.
* sysdeps/unix/sysv/linux/mmap64.c (MMAP_OFF_HIGH_MASK): Define iff
__NR_mmap2 is used.
Avoid lazy binding of symbols that may follow a variant PCS with different
register usage convention from the base PCS.
Currently the lazy binding entry code does not preserve all the registers
required for AdvSIMD and SVE vector calls. Saving and restoring all
registers unconditionally may break existing binaries, even if they never
use vector calls, because of the larger stack requirement for lazy
resolution, which can be significant on an SVE system.
The solution is to mark all symbols in the symbol table that may follow
a variant PCS so the dynamic linker can handle them specially. In this
patch such symbols are always resolved at load time, not lazily.
So currently LD_AUDIT for variant PCS symbols are not supported, for that
the _dl_runtime_profile entry needs to be changed e.g. to unconditionally
save/restore all registers (but pass down arg and retval registers to
pltentry/exit callbacks according to the base PCS).
This patch also removes a __builtin_expect from the modified code because
the branch prediction hint did not seem useful.
* sysdeps/aarch64/dl-machine.h (elf_machine_lazy_rel): Check
STO_AARCH64_VARIANT_PCS and bind such symbols at load time.
Szabolcs Nagy [Thu, 25 Apr 2019 14:35:35 +0000 (15:35 +0100)]
aarch64: add STO_AARCH64_VARIANT_PCS and DT_AARCH64_VARIANT_PCS
STO_AARCH64_VARIANT_PCS is a non-visibility st_other flag for marking
symbols that reference functions that may follow a variant PCS with
different register usage convention from the base PCS.
DT_AARCH64_VARIANT_PCS is a dynamic tag that marks ELF modules that
have R_*_JUMP_SLOT relocations for symbols marked with
STO_AARCH64_VARIANT_PCS (i.e. have variant PCS calls via a PLT).
Florian Weimer [Fri, 28 Jun 2019 07:39:21 +0000 (09:39 +0200)]
io: Remove copy_file_range emulation [BZ #24744]
The kernel is evolving this interface (e.g., removal of the
restriction on cross-device copies), and keeping up with that
is difficult. Applications which need the function should
run kernels which support the system call instead of relying on
the imperfect glibc emulation.
Dmitry V. Levin [Wed, 13 Feb 2019 01:20:51 +0000 (01:20 +0000)]
libio: do not attempt to free wide buffers of legacy streams [BZ #24228]
Commit a601b74d31ca086de38441d316a3dee24c866305 aka glibc-2.23~693
("In preparation for fixing BZ#16734, fix failure in misc/tst-error1-mem
when _G_HAVE_MMAP is turned off.") introduced a regression:
_IO_unbuffer_all now invokes _IO_wsetb to free wide buffers of all
files, including legacy standard files which are small statically
allocated objects that do not have wide buffers and the _mode member,
causing memory corruption.
Another memory corruption in _IO_unbuffer_all happens when -1
is assigned to the _mode member of legacy standard files that
do not have it.
[BZ #24228]
* libio/genops.c (_IO_unbuffer_all)
[SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_1)]: Do not attempt to free wide
buffers and access _IO_FILE_complete members of legacy libio streams.
* libio/tst-bz24228.c: New file.
* libio/tst-bz24228.map: Likewise.
* libio/Makefile [build-shared] (tests): Add tst-bz24228.
[build-shared] (generated): Add tst-bz24228.mtrace and
tst-bz24228.check.
[run-built-tests && build-shared] (tests-special): Add
$(objpfx)tst-bz24228-mem.out.
(LDFLAGS-tst-bz24228, tst-bz24228-ENV): New variables.
($(objpfx)tst-bz24228-mem.out): New rule.
Wilco Dijkstra [Fri, 10 May 2019 15:38:21 +0000 (16:38 +0100)]
Fix tcache count maximum (BZ #24531)
The tcache counts[] array is a char, which has a very small range and thus
may overflow. When setting tcache_count tunable, there is no overflow check.
However the tunable must not be larger than the maximum value of the tcache
counts[] array, otherwise it can overflow when filling the tcache.
[BZ #24531]
* malloc/malloc.c (MAX_TCACHE_COUNT): New define.
(do_set_tcache_count): Only update if count is small enough.
* manual/tunables.texi (glibc.malloc.tcache_count): Document max value.
Mark Wielaard [Wed, 15 May 2019 15:14:01 +0000 (17:14 +0200)]
dlfcn: Guard __dlerror_main_freeres with __libc_once_get (once) [BZ#24476]
dlerror.c (__dlerror_main_freeres) will try to free resources which only
have been initialized when init () has been called. That function is
called when resources are needed using __libc_once (once, init) where
once is a __libc_once_define (static, once) in the dlerror.c file.
Trying to free those resources if init () hasn't been called will
produce errors under valgrind memcheck. So guard the freeing of those
resources using __libc_once_get (once) and make sure we have a valid
key. Also add a similar guard to __dlerror ().
* dlfcn/dlerror.c (__dlerror_main_freeres): Guard using
__libc_once_get (once) and static_bug == NULL.
(__dlerror): Check we have a valid key, set result to static_buf
otherwise.
Andreas Schwab [Tue, 14 May 2019 15:14:59 +0000 (17:14 +0200)]
Fix crash in _IO_wfile_sync (bug 20568)
When computing the length of the converted part of the stdio buffer, use
the number of consumed wide characters, not the (negative) distance to the
end of the wide buffer.
Adam Maris [Thu, 14 Mar 2019 20:51:16 +0000 (16:51 -0400)]
malloc: Check for large bin list corruption when inserting unsorted chunk
Fixes bug 24216. This patch adds security checks for bk and bk_nextsize pointers
of chunks in large bin when inserting chunk from unsorted bin. It was possible
to write the pointer to victim (newly inserted chunk) to arbitrary memory
locations if bk or bk_nextsize pointers of the next large bin chunk
got corrupted.
Florian Weimer [Mon, 20 Aug 2018 12:57:13 +0000 (14:57 +0200)]
malloc: Add ChangeLog for accidentally committed change
Commit b90ddd08f6dd688e651df9ee89ca3a69ff88cd0c ("malloc: Additional
checks for unsorted bin integrity I.") was committed without a
whitespace fix, so it is adjusted here as well.
Since 9182aa67994 (Fix vDSO l_name for GDB's, BZ#387) the initial link_map
for executable itself and loader will have both l_name and l_libname->name
holding the same value due:
Since the value at ln.name (l_libname->name) will be the same as previously
read. The straightforward fix is just avoid the check and read the new list
entry.
I checked also against binaries issues with old loaders with fix for BZ#387,
and pldd could dump the shared objects.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, and
powerpc64le-linux-gnu.
[BZ #18035]
* elf/Makefile (tests-container): Add tst-pldd.
* elf/pldd-xx.c: Use _Static_assert in of pldd_assert.
(E(find_maps)): Avoid use alloca, use default read file operations
instead of explicit LFS names, and fix infinite loop.
* elf/pldd.c: Explicit set _FILE_OFFSET_BITS, cleanup headers.
(get_process_info): Use _Static_assert instead of assert, use default
directory operations instead of explicit LFS names, and free some
leadek pointers.
* elf/tst-pldd.c: New file.
Mike Frysinger [Wed, 24 Apr 2019 17:30:53 +0000 (19:30 +0200)]
memusagestat: use local glibc when linking [BZ #18465]
The memusagestat is the only binary that has its own link line which
causes it to be linked against the existing installed C library. It
has been this way since it was originally committed in 1999, but I
don't see any reason as to why. Since we want all the programs we
build locally to be against the new copy of glibc, change the build
to be like all other programs.
Paul Eggert [Mon, 21 Jan 2019 19:08:13 +0000 (11:08 -0800)]
regex: fix read overrun [BZ #24114]
Problem found by AddressSanitizer, reported by Hongxu Chen in:
https://debbugs.gnu.org/34140
* posix/regexec.c (proceed_next_node):
Do not read past end of input buffer.
powerpc: Only enable TLE with PPC_FEATURE2_HTM_NOSC
Linux from 3.9 through 4.2 does not abort HTM transaction on syscalls,
instead it suspend and resume it when leaving the kernel. The
side-effects of the syscall will always remain visible, even if the
transaction is aborted. This is an issue when transaction is used along
with futex syscall, on pthread_cond_wait for instance, where the futex
call might succeed but the transaction is rolled back leading the
pthread_cond object in an inconsistent state.
Glibc used to prevent it by always aborting a transaction before issuing
a syscall. Linux 4.2 also decided to abort active transaction in
syscalls which makes the glibc workaround superfluous. Worse, glibc
transaction abortion leads to a performance issue on recent kernels
where the HTM state is saved/restore lazily (v4.9). By aborting a
transaction on every syscalls, regardless whether a transaction has being
initiated before, GLIBS makes the kernel always save/restore HTM state
(it can not even lazily disable it after a certain number of syscall
iterations).
Because of this shortcoming, Transactional Lock Elision is just enabled
when it has been explicitly set (either by tunables of by a configure
switch) and if kernel aborts HTM transactions on syscalls
(PPC_FEATURE2_HTM_NOSC). It is reported that using simple benchmark [1],
the context-switch is about 5% faster by not issuing a tabort in every
syscall in newer kernels.
Checked on powerpc64le-linux-gnu with 4.4.0 kernel (Ubuntu 16.04).
* NEWS: Add note about new TLE support on powerpc64le.
* sysdeps/powerpc/nptl/tcb-offsets.sym (TM_CAPABLE): Remove.
* sysdeps/powerpc/nptl/tls.h (tcbhead_t): Rename tm_capable to
__ununsed1.
(TLS_INIT_TP, TLS_DEFINE_INIT_TP): Remove tm_capable setup.
(THREAD_GET_TM_CAPABLE, THREAD_SET_TM_CAPABLE): Remove macros.
* sysdeps/powerpc/powerpc32/sysdep.h,
sysdeps/powerpc/powerpc64/sysdep.h (ABORT_TRANSACTION_IMPL,
ABORT_TRANSACTION): Remove macros.
* sysdeps/powerpc/sysdep.h (ABORT_TRANSACTION): Likewise.
* sysdeps/unix/sysv/linux/powerpc/elision-conf.c (elision_init): Set
__pthread_force_elision iff PPC_FEATURE2_HTM_NOSC is set.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h,
sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h
sysdeps/unix/sysv/linux/powerpc/syscall.S (ABORT_TRANSACTION): Remove
usage.
* sysdeps/unix/sysv/linux/powerpc/not-errno.h: Remove file.
Jim Wilson [Sun, 13 Jan 2019 23:48:09 +0000 (15:48 -0800)]
RISC-V: Fix elfutils testsuite unwind failures.
The clone.S patch fixes 2 elfutils testsuite unwind failures, where the
backtrace gets stuck repeating __thread_start until we hit the backtrace
limit. This was confirmed by building and installing a patched glibc and
then building elfutils and running its testsuite.
Unfortunately, the testcase isn't working as expected and I don't know why.
The testcase passes even when my clone.S patch is not installed. The testcase
looks logically similarly to the elfutils testcases that are failing. Maybe
there is a subtle difference in how the glibc unwinding works versus the
elfutils unwinding? I don't have good gdb pthread support yet, so I haven't
found a way to debug this. Anyways, I don't know if the testcase is useful or
not. If the testcase isn't useful then maybe the clone.S patch is OK without
a testcase?
Jim
[BZ #24040]
* elf/Makefile (CFLAGS-tst-unwind-main.c): Add -DUSE_PTHREADS=0.
* elf/tst-unwind-main.c: If USE_PTHEADS, include pthread.h and error.h
(func): New.
(main): If USE_PTHREADS, call pthread_create to run func. Otherwise
call func directly.
* nptl/Makefile (tests): Add tst-unwind-thread.
(CFLAGS-tst-unwind-thread.c): Define.
* nptl/tst-unwind-thread.c: New file.
* sysdeps/unix/sysv/linux/riscv/clone.S (__thread_start): Mark ra
as undefined.
For a full analysis of both the pthread_rwlock_tryrdlock() stall
and the pthread_rwlock_trywrlock() stall see:
https://sourceware.org/bugzilla/show_bug.cgi?id=23844#c14
In the pthread_rwlock_trydlock() function we fail to inspect for
PTHREAD_RWLOCK_FUTEX_USED in __wrphase_futex and wake the waiting
readers.
In the pthread_rwlock_trywrlock() function we write 1 to
__wrphase_futex and loose the setting of the PTHREAD_RWLOCK_FUTEX_USED
bit, again failing to wake waiting readers during unlock.
The fix in the case of pthread_rwlock_trydlock() is to check for
PTHREAD_RWLOCK_FUTEX_USED and wake the readers.
The fix in the case of pthread_rwlock_trywrlock() is to only write
1 to __wrphase_futex if we installed the write phase, since all other
readers would be spinning waiting for this step.
We add two new tests, one exercises the stall for
pthread_rwlock_trywrlock() which is easy to exercise, and one exercises
the stall for pthread_rwlock_trydlock() which is harder to exercise.
The pthread_rwlock_trywrlock() test fails consistently without the fix,
and passes after. The pthread_rwlock_tryrdlock() test fails roughly
5-10% of the time without the fix, and passes all the time after.
Florian Weimer [Fri, 8 Feb 2019 11:55:21 +0000 (12:55 +0100)]
nptl: Avoid fork handler lock for async-signal-safe fork [BZ #24161]
Commit 27761a1042daf01987e7d79636d0c41511c6df3c ("Refactor atfork
handlers") introduced a lock, atfork_lock, around fork handler list
accesses. It turns out that this lock occasionally results in
self-deadlocks in malloc/tst-mallocfork2:
(gdb) bt
#0 __lll_lock_wait_private ()
at ../sysdeps/unix/sysv/linux/x86_64/lowlevellock.S:63
#1 0x00007f160c6f927a in __run_fork_handlers (who=(unknown: 209394016),
who@entry=atfork_run_prepare) at register-atfork.c:116
#2 0x00007f160c6b7897 in __libc_fork () at ../sysdeps/nptl/fork.c:58
#3 0x00000000004027d6 in sigusr1_handler (signo=<optimized out>)
at tst-mallocfork2.c:80
#4 sigusr1_handler (signo=<optimized out>) at tst-mallocfork2.c:64
#5 <signal handler called>
#6 0x00007f160c6f92e4 in __run_fork_handlers (who=who@entry=atfork_run_parent)
at register-atfork.c:136
#7 0x00007f160c6b79a2 in __libc_fork () at ../sysdeps/nptl/fork.c:152
#8 0x0000000000402567 in do_test () at tst-mallocfork2.c:156
#9 0x0000000000402dd2 in support_test_main (argc=1, argv=0x7ffc81ef1ab0,
config=config@entry=0x7ffc81ef1970) at support_test_main.c:350
#10 0x0000000000402362 in main (argc=<optimized out>, argv=<optimized out>)
at ../support/test-driver.c:168
If no locking happens in the single-threaded case (where fork is
expected to be async-signal-safe), this deadlock is avoided.
(pthread_atfork is not required to be async-signal-safe, so a fork
call from a signal handler interrupting pthread_atfork is not
a problem.)
Stefan Liebler [Thu, 7 Feb 2019 14:18:36 +0000 (15:18 +0100)]
Add compiler barriers around modifications of the robust mutex list for pthread_mutex_trylock. [BZ #24180]
While debugging a kernel warning, Thomas Gleixner, Sebastian Sewior and
Heiko Carstens found a bug in pthread_mutex_trylock due to misordered
instructions:
140: a5 1b 00 01 oill %r1,1
144: e5 48 a0 f0 00 00 mvghi 240(%r10),0 <--- THREAD_SETMEM (THREAD_SELF, robust_head.list_op_pending, NULL);
14a: e3 10 a0 e0 00 24 stg %r1,224(%r10) <--- last THREAD_SETMEM of ENQUEUE_MUTEX_PI
Please have a look at the discussion:
"Re: WARN_ON_ONCE(!new_owner) within wake_futex_pi() triggerede"
(https://lore.kernel.org/lkml/20190202112006.GB3381@osiris/)
This patch is introducing the same compiler barriers and comments
for pthread_mutex_trylock as introduced for pthread_mutex_lock and
pthread_mutex_timedlock by commit 8f9450a0b7a9e78267e8ae1ab1000ebca08e473e
"Add compiler barriers around modifications of the robust mutex list."
ChangeLog:
[BZ #24180]
* nptl/pthread_mutex_trylock.c (__pthread_mutex_trylock):
Add compiler barriers and comments.
Florian Weimer [Mon, 4 Feb 2019 19:07:18 +0000 (20:07 +0100)]
nscd: Do not use __inet_aton_exact@GLIBC_PRIVATE [BZ #20018]
This commit avoids referencing the __inet_aton_exact@GLIBC_PRIVATE
symbol from nscd. In master, the separately-compiled getaddrinfo
implementation in nscd needs it, however such an internal ABI change
is not desirable on a release branch if it can be avoided.
The IPv4 address parser in the getaddrinfo function is changed so that
it does not ignore trailing whitespace and all characters after it.
For backwards compatibility, the getaddrinfo function still recognizes
legacy name syntax, such as 192.000.002.010 interpreted as 192.0.2.8
(octal).
This commit does not change the behavior of inet_addr and inet_aton.
gethostbyname already had additional sanity checks (but is switched
over to the new __inet_aton_exact function for completeness as well).
To avoid sending the problematic query names over DNS, commit 6ca53a2453598804a2559a548a08424fca96434a ("resolv: Do not send queries
for non-host-names in nss_dns [BZ #24112]") is needed.
Florian Weimer [Mon, 21 Jan 2019 08:26:41 +0000 (09:26 +0100)]
resolv: Do not send queries for non-host-names in nss_dns [BZ #24112]
Before this commit, nss_dns would send a query which did not contain a
host name as the query name (such as invalid\032name.example.com) and
then reject the answer in getanswer_r and gaih_getanswer_slice, using
a check based on res_hnok. With this commit, no query is sent, and a
host-not-found error is returned to NSS without network interaction.
H.J. Lu [Mon, 4 Feb 2019 16:55:52 +0000 (08:55 -0800)]
x86-64 memcmp: Use unsigned Jcc instructions on size [BZ #24155]
Since the size argument is unsigned. we should use unsigned Jcc
instructions, instead of signed, to check size.
Tested on x86-64 and x32, with and without --disable-multi-arch.
[BZ #24155]
CVE-2019-7309
* NEWS: Updated for CVE-2019-7309.
* sysdeps/x86_64/memcmp.S: Use RDX_LP for size. Clear the
upper 32 bits of RDX register for x32. Use unsigned Jcc
instructions, instead of signed.
* sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-memcmp-2.
* sysdeps/x86_64/x32/tst-size_t-memcmp-2.c: New test.
H.J. Lu [Fri, 1 Feb 2019 20:24:08 +0000 (12:24 -0800)]
x86-64 strnlen/wcsnlen: Properly handle the length parameter [BZ #24097]
On x32, the size_t parameter may be passed in the lower 32 bits of a
64-bit register with the non-zero upper 32 bits. The string/memory
functions written in assembly can only use the lower 32 bits of a
64-bit register as length or must clear the upper 32 bits before using
the full 64-bit register for length.
This pach fixes strnlen/wcsnlen for x32. Tested on x86-64 and x32. On
x86-64, libc.so is the same with and withou the fix.
[BZ #24097]
CVE-2019-6488
* sysdeps/x86_64/multiarch/strlen-avx2.S: Use RSI_LP for length.
Clear the upper 32 bits of RSI register.
* sysdeps/x86_64/strlen.S: Use RSI_LP for length.
* sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-strnlen
and tst-size_t-wcsnlen.
* sysdeps/x86_64/x32/tst-size_t-strnlen.c: New file.
* sysdeps/x86_64/x32/tst-size_t-wcsnlen.c: Likewise.
H.J. Lu [Fri, 1 Feb 2019 20:23:23 +0000 (12:23 -0800)]
x86-64 strncpy: Properly handle the length parameter [BZ #24097]
On x32, the size_t parameter may be passed in the lower 32 bits of a
64-bit register with the non-zero upper 32 bits. The string/memory
functions written in assembly can only use the lower 32 bits of a
64-bit register as length or must clear the upper 32 bits before using
the full 64-bit register for length.
This pach fixes strncpy for x32. Tested on x86-64 and x32. On x86-64,
libc.so is the same with and withou the fix.
[BZ #24097]
CVE-2019-6488
* sysdeps/x86_64/multiarch/strcpy-sse2-unaligned.S: Use RDX_LP
for length.
* sysdeps/x86_64/multiarch/strcpy-ssse3.S: Likewise.
* sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-strncpy.
* sysdeps/x86_64/x32/tst-size_t-strncpy.c: New file.
H.J. Lu [Fri, 1 Feb 2019 20:22:33 +0000 (12:22 -0800)]
x86-64 strncmp family: Properly handle the length parameter [BZ #24097]
On x32, the size_t parameter may be passed in the lower 32 bits of a
64-bit register with the non-zero upper 32 bits. The string/memory
functions written in assembly can only use the lower 32 bits of a
64-bit register as length or must clear the upper 32 bits before using
the full 64-bit register for length.
This pach fixes the strncmp family for x32. Tested on x86-64 and x32.
On x86-64, libc.so is the same with and withou the fix.
[BZ #24097]
CVE-2019-6488
* sysdeps/x86_64/multiarch/strcmp-avx2.S: Use RDX_LP for length.
* sysdeps/x86_64/multiarch/strcmp-sse42.S: Likewise.
* sysdeps/x86_64/strcmp.S: Likewise.
* sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-strncasecmp,
tst-size_t-strncmp and tst-size_t-wcsncmp.
* sysdeps/x86_64/x32/tst-size_t-strncasecmp.c: New file.
* sysdeps/x86_64/x32/tst-size_t-strncmp.c: Likewise.
* sysdeps/x86_64/x32/tst-size_t-wcsncmp.c: Likewise.
H.J. Lu [Fri, 1 Feb 2019 20:21:41 +0000 (12:21 -0800)]
x86-64 memset/wmemset: Properly handle the length parameter [BZ #24097]
On x32, the size_t parameter may be passed in the lower 32 bits of a
64-bit register with the non-zero upper 32 bits. The string/memory
functions written in assembly can only use the lower 32 bits of a
64-bit register as length or must clear the upper 32 bits before using
the full 64-bit register for length.
This pach fixes memset/wmemset for x32. Tested on x86-64 and x32. On
x86-64, libc.so is the same with and withou the fix.
[BZ #24097]
CVE-2019-6488
* sysdeps/x86_64/multiarch/memset-avx512-no-vzeroupper.S: Use
RDX_LP for length. Clear the upper 32 bits of RDX register.
* sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S: Likewise.
* sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-wmemset.
* sysdeps/x86_64/x32/tst-size_t-memset.c: New file.
* sysdeps/x86_64/x32/tst-size_t-wmemset.c: Likewise.
H.J. Lu [Fri, 1 Feb 2019 20:20:54 +0000 (12:20 -0800)]
x86-64 memrchr: Properly handle the length parameter [BZ #24097]
On x32, the size_t parameter may be passed in the lower 32 bits of a
64-bit register with the non-zero upper 32 bits. The string/memory
functions written in assembly can only use the lower 32 bits of a
64-bit register as length or must clear the upper 32 bits before using
the full 64-bit register for length.
This pach fixes memrchr for x32. Tested on x86-64 and x32. On x86-64,
libc.so is the same with and withou the fix.
[BZ #24097]
CVE-2019-6488
* sysdeps/x86_64/memrchr.S: Use RDX_LP for length.
* sysdeps/x86_64/multiarch/memrchr-avx2.S: Likewise.
* sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-memrchr.
* sysdeps/x86_64/x32/tst-size_t-memrchr.c: New file.
H.J. Lu [Fri, 1 Feb 2019 20:20:06 +0000 (12:20 -0800)]
x86-64 memcpy: Properly handle the length parameter [BZ #24097]
On x32, the size_t parameter may be passed in the lower 32 bits of a
64-bit register with the non-zero upper 32 bits. The string/memory
functions written in assembly can only use the lower 32 bits of a
64-bit register as length or must clear the upper 32 bits before using
the full 64-bit register for length.
This pach fixes memcpy for x32. Tested on x86-64 and x32. On x86-64,
libc.so is the same with and withou the fix.
[BZ #24097]
CVE-2019-6488
* sysdeps/x86_64/multiarch/memcpy-ssse3-back.S: Use RDX_LP for
length. Clear the upper 32 bits of RDX register.
* sysdeps/x86_64/multiarch/memcpy-ssse3.S: Likewise.
* sysdeps/x86_64/multiarch/memmove-avx512-no-vzeroupper.S:
Likewise.
* sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:
Likewise.
* sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-memcpy.
tst-size_t-wmemchr.
* sysdeps/x86_64/x32/tst-size_t-memcpy.c: New file.
H.J. Lu [Fri, 1 Feb 2019 20:19:07 +0000 (12:19 -0800)]
x86-64 memcmp/wmemcmp: Properly handle the length parameter [BZ #24097]
On x32, the size_t parameter may be passed in the lower 32 bits of a
64-bit register with the non-zero upper 32 bits. The string/memory
functions written in assembly can only use the lower 32 bits of a
64-bit register as length or must clear the upper 32 bits before using
the full 64-bit register for length.
This pach fixes memcmp/wmemcmp for x32. Tested on x86-64 and x32. On
x86-64, libc.so is the same with and withou the fix.
[BZ #24097]
CVE-2019-6488
* sysdeps/x86_64/multiarch/memcmp-avx2-movbe.S: Use RDX_LP for
length. Clear the upper 32 bits of RDX register.
* sysdeps/x86_64/multiarch/memcmp-sse4.S: Likewise.
* sysdeps/x86_64/multiarch/memcmp-ssse3.S: Likewise.
* sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-memcmp and
tst-size_t-wmemcmp.
* sysdeps/x86_64/x32/tst-size_t-memcmp.c: New file.
* sysdeps/x86_64/x32/tst-size_t-wmemcmp.c: Likewise.
H.J. Lu [Fri, 1 Feb 2019 20:17:09 +0000 (12:17 -0800)]
x86-64 memchr/wmemchr: Properly handle the length parameter [BZ #24097]
On x32, the size_t parameter may be passed in the lower 32 bits of a
64-bit register with the non-zero upper 32 bits. The string/memory
functions written in assembly can only use the lower 32 bits of a
64-bit register as length or must clear the upper 32 bits before using
the full 64-bit register for length.
This pach fixes memchr/wmemchr for x32. Tested on x86-64 and x32. On
x86-64, libc.so is the same with and withou the fix.
[BZ #24097]
CVE-2019-6488
* sysdeps/x86_64/memchr.S: Use RDX_LP for length. Clear the
upper 32 bits of RDX register.
* sysdeps/x86_64/multiarch/memchr-avx2.S: Likewise.
* sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-memchr and
tst-size_t-wmemchr.
* sysdeps/x86_64/x32/test-size_t.h: New file.
* sysdeps/x86_64/x32/tst-size_t-memchr.c: Likewise.
* sysdeps/x86_64/x32/tst-size_t-wmemchr.c: Likewise.
Add XFAIL_ROUNDING_IBM128_LIBGCC to more fma() tests
Ignore 16 errors in math/test-ldouble-fma and 4 errors in
math/test-ildouble-fma when IBM 128-bit long double used.
These errors are caused by spurious overflows from libgcc.
* math/libm-test-fma.inc (fma_test_data): Set
XFAIL_ROUNDING_IBM128_LIBGCC to more tests.
Aurelien Jarno [Thu, 3 Jan 2019 14:51:37 +0000 (15:51 +0100)]
Only build libm with -fno-math-errno (bug 24024)
Commit 1294b1892e ("Add support for sqrt asm redirects") added the
-fno-math-errno flag to build most of the glibc in order to enable GCC
to inline math functions. Due to GCC bug #88576, saving and restoring
errno around calls to malloc are optimized-out. In turn this causes
strerror to set errno to ENOMEM if it get passed an invalid error number
and if malloc sets errno to ENOMEM (which might happen even if it
succeeds). This is not allowed by POSIX.
This patch changes the build flags, building only libm with
-fno-math-errno and all the remaining code with -fno-math-errno. This
should be safe as libm doesn't contain any code saving and restoring
errno around malloc. This patch can probably be reverted once the GCC
bug is fixed and available in stable releases.
Tested on x86-64, no regression in the testsuite.
Changelog:
[BZ #24024]
* Makeconfig: Build libm with -fno-math-errno but build the remaining
code with -fmath-errno.
* string/Makefile [$(build-shared)] (tests): Add test-strerror-errno.
[$(build-shared)] (LDLIBS-test-strerror-errno): New variable.
* string/test-strerror-errno.c: New file.
Martin Jansa [Tue, 2 Oct 2018 15:38:43 +0000 (15:38 +0000)]
sysdeps/ieee754/soft-fp: ignore maybe-uninitialized with -O [BZ #19444]
* with -O, -O1, -Os it fails with:
In file included from ../soft-fp/soft-fp.h:318,
from ../sysdeps/ieee754/soft-fp/s_fdiv.c:28:
../sysdeps/ieee754/soft-fp/s_fdiv.c: In function '__fdiv':
../soft-fp/op-2.h:98:25: error: 'R_f1' may be used uninitialized in this function [-Werror=maybe-uninitialized]
X##_f0 = (X##_f1 << (_FP_W_TYPE_SIZE - (N)) | X##_f0 >> (N) \
^~
../sysdeps/ieee754/soft-fp/s_fdiv.c:38:14: note: 'R_f1' was declared here
FP_DECL_D (R);
^
../soft-fp/op-2.h:37:36: note: in definition of macro '_FP_FRAC_DECL_2'
_FP_W_TYPE X##_f0 _FP_ZERO_INIT, X##_f1 _FP_ZERO_INIT
^
../soft-fp/double.h:95:24: note: in expansion of macro '_FP_DECL'
# define FP_DECL_D(X) _FP_DECL (2, X)
^~~~~~~~
../sysdeps/ieee754/soft-fp/s_fdiv.c:38:3: note: in expansion of macro 'FP_DECL_D'
FP_DECL_D (R);
^~~~~~~~~
../soft-fp/op-2.h:101:17: error: 'R_f0' may be used uninitialized in this function [-Werror=maybe-uninitialized]
: (X##_f0 << (_FP_W_TYPE_SIZE - (N))) != 0)); \
^~
../sysdeps/ieee754/soft-fp/s_fdiv.c:38:14: note: 'R_f0' was declared here
FP_DECL_D (R);
^
../soft-fp/op-2.h:37:14: note: in definition of macro '_FP_FRAC_DECL_2'
_FP_W_TYPE X##_f0 _FP_ZERO_INIT, X##_f1 _FP_ZERO_INIT
^
../soft-fp/double.h:95:24: note: in expansion of macro '_FP_DECL'
# define FP_DECL_D(X) _FP_DECL (2, X)
^~~~~~~~
../sysdeps/ieee754/soft-fp/s_fdiv.c:38:3: note: in expansion of macro 'FP_DECL_D'
FP_DECL_D (R);
^~~~~~~~~
Build tested with Yocto for ARM, AARCH64, X86, X86_64, PPC, MIPS, MIPS64
with -O, -O1, -Os.
For AARCH64 it needs one more fix in locale for -Os.
[BZ #19444]
* sysdeps/ieee754/soft-fp/s_fdiv.c: Include <libc-diag.h> and use
DIAG_PUSH_NEEDS_COMMENT, DIAG_IGNORE_NEEDS_COMMENT and
DIAG_POP_NEEDS_COMMENT to disable -Wmaybe-uninitialized.
Aurelien Jarno [Wed, 2 Jan 2019 17:21:18 +0000 (18:21 +0100)]
ARM: fix kernel assisted atomics with GCC 8 (bug 24034)
The pre-ARMv7 CPUs are missing atomic compare and exchange and/or
barrier instructions. Therefore those are implemented using kernel
assistance, calling a kernel function at a specific address, and passing
the arguments in the r0 to r4 registers. This is done by specifying
registers for local variables. The a_ptr variable is placed in the r2
register and declared with __typeof (mem). According to the GCC
documentation on local register variables, if mem is a constant pointer,
the compiler may substitute the variable with its initializer in asm
statements, which may cause the corresponding operand to appear in a
different register.
This happens in __libc_start_main with the pointer to the thread counter
for static binaries (but not the shared ones):
This causes static binaries using threads to crash when the GNU libc is
built with GCC 8 and most notably tst-cancel21-static.
To fix that, use the same trick than for the volatile qualifier,
defining a_ptr as a union.
Changelog:
[BZ #24034]
* sysdeps/unix/sysv/linux/arm/atomic-machine.h
(__arm_assisted_compare_and_exchange_val_32_acq): Use uint32_t rather
than __typeof (...) for the a_ptr variable.
(cherry picked from commit fe20bb1d6084bbf38fef587b0fb33eb6257cc1ed)
Marcin Juszkiewicz reported issues while generating syscall table for riscv
using 4.20-rc1. The patch refactors our unistd.h files to match some other
architectures.
- Add asm/unistd.h UAPI header, which has __ARCH_WANT_NEW_STAT only for 64-bit
- Remove asm/syscalls.h UAPI header and merge to asm/unistd.h
- Adjust kernel asm/unistd.h
So now asm/unistd.h UAPI header should show all syscalls for riscv.
UAPI header asm/syscalls.h was merged into UAPI asm/unistd.h header,
which did resolve issue with missing syscalls macros resulting in
glibc (2.28) build failure. It also broke glibc in a different way:
asm/syscalls.h is being used by glibc. I noticed this while doing
Fedora 30/Rawhide mass rebuild.
The patch returns asm/syscalls.h header and incl. it into asm/unistd.h.
I plan to send a patch to glibc to use asm/unistd.h instead of
asm/syscalls.h
In the meantime, we use __has_include__, which was added to GCC 5, to
check if <asm/syscalls.h> exists before including it. Tested with
build-many-glibcs.py for riscv against kernel 4.19.12 and 4.20-rc7.
[BZ #24022]
* sysdeps/unix/sysv/linux/riscv/flush-icache.c: Check if
<asm/syscalls.h> exists with __has_include__ before including it.
Florian Weimer [Mon, 31 Dec 2018 21:04:36 +0000 (22:04 +0100)]
malloc: Always call memcpy in _int_realloc [BZ #24027]
This commit removes the custom memcpy implementation from _int_realloc
for small chunk sizes. The ncopies variable has the wrong type, and
an integer wraparound could cause the existing code to copy too few
elements (leaving the new memory region mostly uninitialized).
Therefore, removing this code fixes bug 24027.
Commit b4a5d26d883 (linux: Consolidate sigaction implementation) added
a wrong kernel_sigaction definition for m68k, meant for __NR_sigaction
instead of __NR_rt_sigaction as used on generic Linux sigaction
implementation. This patch fixes it by using the Linux generic
definition meant for the RT kernel ABI.
Checked the signal tests on emulated m68-linux-gnu (Aranym). It fixes
the faulty signal/tst-sigaction and man works as expected.
Adhemerval Zanella <adhemerval.zanella@linaro.org>
James Clarke <jrtc27@jrtc27.com>
[BZ #23967]
* sysdeps/unix/sysv/linux/kernel_sigaction.h (HAS_SA_RESTORER):
Define if SA_RESTORER is defined.
(kernel_sigaction): Define sa_restorer if HAS_SA_RESTORER is defined.
(SET_SA_RESTORER, RESET_SA_RESTORER): Define iff the macro are not
already defined.
* sysdeps/unix/sysv/linux/m68k/kernel_sigaction.h (SA_RESTORER,
kernel_sigaction, SET_SA_RESTORER, RESET_SA_RESTORER): Remove
definitions.
(HAS_SA_RESTORER): Define.
* sysdeps/unix/sysv/linux/sparc/kernel_sigaction.h (SA_RESTORER,
SET_SA_RESTORER, RESET_SA_RESTORER): Remove definition.
(HAS_SA_RESTORER): Define.
* sysdeps/unix/sysv/linux/nios2/kernel_sigaction.h: Include generic
kernel_sigaction after define SET_SA_RESTORER and RESET_SA_RESTORER.
* sysdeps/unix/sysv/linux/powerpc/kernel_sigaction.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sigaction.c: Likewise.
Andreas Schwab [Tue, 25 Sep 2018 09:11:27 +0000 (11:11 +0200)]
RISC-V: properly terminate call chain (bug 23125)
Mark the ra register as undefined in _start, so that unwinding through
main works correctly. Also, don't use a tail call so that ra points after
the call to __libc_start_main, not after the previous call.
Andreas Schwab [Thu, 8 Nov 2018 13:28:22 +0000 (14:28 +0100)]
Fix rwlock stall with PREFER_WRITER_NONRECURSIVE_NP (bug 23861)
In the read lock function (__pthread_rwlock_rdlock_full) there was a
code path which would fail to reload __readers while waiting for
PTHREAD_RWLOCK_RWAITING to change. This failure to reload __readers
into a local value meant that various conditionals used the old value
of __readers and with only two threads left it could result in an
indefinite stall of one of the readers (waiting for PTHREAD_RWLOCK_RWAITING
to go to zero, but it never would).
powerpc: Add missing CFI register information (bug #23614)
Add CFI information about the offset of registers stored in the stack
frame.
[BZ #23614]
* sysdeps/powerpc/powerpc64/addmul_1.S (FUNC): Add CFI offset for
registers saved in the stack frame.
* sysdeps/powerpc/powerpc64/lshift.S (__mpn_lshift): Likewise.
* sysdeps/powerpc/powerpc64/mul_1.S (__mpn_mul_1): Likewise.
Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com> Reviewed-by: Gabriel F. T. Gomes <gabriel@inconstante.eti.br>
(cherry picked from commit 1d880d4a9bf7608c2cd33bbe954ce6995f79121a)
projects / thirdparty / glibc.git / log
