]>
Commit | Line | Data |
---|---|---|
6fc6879b JM |
1 | ChangeLog for wpa_supplicant |
2 | ||
1ae1570b JM |
3 | ????-??-?? - v2.0 |
4 | * removed Qt3-based wpa_gui (obsoleted by wpa_qui-qt4) | |
5 | * removed unmaintained driver wrappers broadcom, iphone, osx, ralink, | |
6 | hostap, madwifi (hostap and madwifi remain available for hostapd; | |
7 | their wpa_supplicant functionality is obsoleted by wext) | |
8 | * improved debug logging (human readable event names, interface name | |
9 | included in more entries) | |
10 | * changed AP mode behavior to enable WPS only for open and | |
11 | WPA/WPA2-Personal configuration | |
12 | * improved P2P concurrency operations | |
13 | - better coordination of concurrent scan and P2P search operations | |
14 | - avoid concurrent remain-on-channel operation requests by canceling | |
15 | previous operations prior to starting a new one | |
16 | - reject operations that would require multi-channel concurrency if | |
17 | the driver does not support it | |
18 | - add parameter to select whether STA or P2P connection is preferred | |
19 | if the driver cannot support both at the same time | |
20 | - allow driver to indicate channel changes | |
21 | - added optional delay=<search delay in milliseconds> parameter for | |
22 | p2p_find to avoid taking all radio resources | |
23 | - use 500 ms p2p_find search delay by default during concurrent | |
24 | operations | |
25 | - allow all channels in GO Negotiation if the driver supports | |
26 | multi-channel concurrency | |
27 | * added number of small changes to make it easier for static analyzers | |
28 | to understand the implementation | |
29 | * fixed number of small bugs (see git logs for more details) | |
30 | * nl80211: number of updates to use new cfg80211/nl80211 functionality | |
31 | - replace monitor interface with nl80211 commands for AP mode | |
32 | - additional information for driver-based AP SME | |
33 | - STA entry authorization in RSN IBSS | |
34 | * EAP-pwd: | |
35 | - fixed KDF for group 21 and zero-padding | |
36 | - added support for fragmentation | |
37 | - increased maximum number of hunting-and-pecking iterations | |
38 | * avoid excessive Probe Response retries for broadcast Probe Request | |
39 | frames (only with drivers using wpa_supplicant AP mode SME/MLME) | |
40 | * added "GET country" ctrl_iface command | |
41 | * do not save an invalid network block in wpa_supplicant.conf to avoid | |
42 | problems reading the file on next start | |
43 | * send STA connected/disconnected ctrl_iface events to both the P2P | |
44 | group and parent interfaces | |
45 | * added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y) | |
46 | * added "SET pno <1/0>" ctrl_iface command to start/stop preferred | |
47 | network offload with sched_scan driver command | |
48 | * merged in number of changes from Android repository for P2P, nl80211, | |
49 | and build parameters | |
50 | * changed P2P GO mode configuration to use driver capabilities to | |
51 | automatically enable HT operations when supported | |
52 | * added "wpa_cli status wps" command to fetch WPA2-Personal passhrase | |
53 | for WPS use cases in AP mode | |
54 | * EAP-AKA: keep pseudonym identity across EAP exchanges to match EAP-SIM | |
55 | behavior | |
56 | * improved reassociation behavior in cases where association is rejected | |
57 | or when an AP disconnects us to handle common load balancing | |
58 | mechanisms | |
59 | - try to avoid extra scans when the needed information is available | |
60 | * added optional "join" argument for p2p_prov_disc ctrl_iface command | |
61 | * added group ifname to P2P-PROV-DISC-* events | |
62 | * added P2P Device Address to AP-STA-DISCONNECTED event and use | |
63 | p2p_dev_addr parameter name with AP-STA-CONNECTED | |
64 | * added workarounds for WPS PBC overlap detection for some P2P use cases | |
65 | where deployed stations work incorrectly | |
66 | * optimize WPS connection speed by disconnecting prior to WPS scan and | |
67 | by using single channel scans when AP channel is known | |
68 | * PCSC and SIM/USIM improvements: | |
69 | - accept 0x67 (Wrong length) as a response to READ RECORD to fix | |
70 | issues with some USIM cards | |
71 | - try to read MNC length from SIM/USIM | |
72 | - build realm according to 3GPP TS 23.003 with identity from the SIM | |
73 | - allow T1 protocol to be enabled | |
74 | * added more WPS and P2P information available through D-Bus | |
75 | * improve P2P negotiation robustness | |
76 | - extra waits to get ACK frames through | |
77 | - longer timeouts for cases where deployed devices have been | |
78 | identified have issues meeting the specification requirements | |
79 | - more retries for some P2P frames | |
80 | - handle race conditions in GO Negotiation start by both devices | |
81 | - ignore unexpected GO Negotiation Response frame | |
82 | * added support for libnl 3.2 and newer | |
83 | * added P2P persistent group info to P2P_PEER data | |
84 | * maintain a list of P2P Clients for persistent group on GO | |
85 | * AP: increased initial group key handshake retransmit timeout to 500 ms | |
86 | * added optional dev_id parameter for p2p_find | |
87 | * added P2P-FIND-STOPPED ctrl_iface event | |
88 | * fixed issues in WPA/RSN element validation when roaming with ap_scan=1 | |
89 | and driver-based BSS selection | |
90 | * do not expire P2P peer entries while connected with the peer in a | |
91 | group | |
92 | * fixed WSC element inclusion in cases where P2P is disabled | |
93 | * AP: added a WPS workaround for mixed mode AP Settings with Windows 7 | |
94 | * EAP-SIM: fixed AT_COUNTER_TOO_SMALL use | |
95 | * EAP-SIM/AKA: append realm to pseudonym identity | |
96 | * EAP-SIM/AKA: store pseudonym identity in network configuration to | |
97 | allow it to persist over multiple EAP sessions and wpa_supplicant | |
98 | restarts | |
99 | * EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this | |
100 | breaks interoperability with older versions | |
101 | * added support for WFA Hotspot 2.0 | |
102 | - GAS/ANQP to fetch network information | |
103 | - credential configuration and automatic network selections based on | |
104 | credential match with ANQP information | |
105 | * limited PMKSA cache entries to be used only with the network context | |
106 | that was used to create them | |
107 | * adjusted bgscan_simple fast-scan backoff to avoid too frequent | |
108 | background scans | |
109 | * removed ctrl_iface event on P2P PD Response in join-group case | |
110 | * added option to fetch BSS table entry based on P2P Device Address | |
111 | ("BSS p2p_dev_addr=<P2P Device Address>") | |
112 | * added BSS entry age to ctrl_iface BSS command output | |
113 | * added optional MASK=0xH option for ctrl_iface BSS command to select | |
114 | which fields are included in the response | |
115 | * added optional RANGE=ALL|N1-N2 option for ctrl_iface BSS command to | |
116 | fetch information about several BSSes in one call | |
117 | * simplified licensing terms by selecting the BSD license as the only | |
118 | alternative | |
119 | * added "P2P_SET disallow_freq <freq list>" ctrl_iface command to | |
120 | disable channels from P2P use | |
121 | * added p2p_pref_chan configuration parameter to allow preferred P2P | |
122 | channels to be specified | |
123 | * added support for advertising immediate availability of a WPS | |
124 | credential for P2P use cases | |
125 | * optimized scan operations for P2P use cases (use single channel scan | |
126 | for a specific SSID when possible) | |
127 | * EAP-TTLS: fixed peer challenge generation for MSCHAPv2 | |
128 | * SME: do not use reassociation after explicit disconnection request | |
129 | (local or a notification from an AP) | |
130 | * added support for sending debug info to Linux tracing (-T on command | |
131 | line) | |
132 | * added support for using Deauthentication reason code 3 as an | |
133 | indication of P2P group termination | |
134 | * added wps_vendor_ext_m1 configuration parameter to allow vendor | |
135 | specific attributes to be added to WPS M1 | |
136 | * started using separate TLS library context for tunneled TLS | |
137 | (EAP-PEAP/TLS, EAP-TTLS/TLS, EAP-FAST/TLS) to support different CA | |
138 | certificate configuration between Phase 1 and Phase 2 | |
139 | * added optional "auto" parameter for p2p_connect to request automatic | |
140 | GO Negotiation vs. join-a-group selection | |
141 | * added disabled_scan_offload parameter to disable automatic scan | |
142 | offloading (sched_scan) | |
143 | * added optional persistent=<network id> parameter for p2p_connect to | |
144 | allow forcing of a specific SSID/passphrase for GO Negotiation | |
145 | * added support for OBSS scan requests and 20/40 BSS coexistence reports | |
146 | * reject PD Request for unknown group | |
147 | * removed scripts and notes related to Windows binary releases (which | |
148 | have not been used starting from 1.x) | |
149 | * added initial support for WNM operations | |
150 | - Keep-alive based on BSS max idle period | |
151 | - WNM-Sleep Mode | |
152 | * added autoscan module to control scanning behavior while not connected | |
153 | - autoscan_periodic and autoscan_exponential modules | |
154 | * added new WPS NFC ctrl_iface mechanism | |
155 | - added initial support NFC connection handover | |
156 | - removed obsoleted WPS_OOB command (including support for deprecated | |
157 | UFD config_method) | |
158 | * added optional framework for external password storage ("ext:<name>") | |
159 | * wpa_cli: added optional support for controlling wpa_supplicant | |
160 | remotely over UDP (CONFIG_CTRL_IFACE=udp-remote) for testing purposes | |
161 | * wpa_cli: extended tab completion to more commands | |
162 | * changed SSID output to use printf-escaped strings instead of masking | |
163 | of non-ASCII characters | |
164 | - SSID can now be configured in the same format: ssid=P"abc\x00test" | |
165 | * removed default ACM=1 from AC_VO and AC_VI | |
166 | * added optional "ht40" argument for P2P ctrl_iface commands to allow | |
167 | 40 MHz channels to be requested on the 5 GHz band | |
168 | * added optional parameters for p2p_invite command to specify channel | |
169 | when reinvoking a persistent group as the GO | |
170 | * improved FIPS mode builds with OpenSSL | |
171 | - "make fips" with CONFIG_FIPS=y to build wpa_supplicant with the | |
172 | OpenSSL FIPS object module | |
173 | - replace low level OpenSSL AES API calls to use EVP | |
174 | - use OpenSSL keying material exporter when possible | |
175 | - do not export TLS keys in FIPS mode | |
176 | - remove MD5 from CONFIG_FIPS=y builds | |
177 | - use OpenSSL function for PKBDF2 passphrase-to-PSK | |
178 | - use OpenSSL HMAC implementation | |
179 | - mix RAND_bytes() output into random_get_bytes() to force OpenSSL | |
180 | DRBG to be used in FIPS mode | |
181 | - use OpenSSL CMAC implementation | |
182 | * added mechanism to disable TLS Session Ticket extension | |
183 | - a workaround for servers that do not support TLS extensions that | |
184 | was enabled by default in recent OpenSSL versions | |
185 | - tls_disable_session_ticket=1 | |
186 | - automatically disable TLS Session Ticket extension by default when | |
187 | using EAP-TLS/PEAP/TTLS (i.e., only use it with EAP-FAST) | |
188 | * changed VENDOR-TEST EAP method to use proper private enterprise number | |
189 | (this will not interoperate with older versions) | |
190 | * disable network block temporarily on authentication failures | |
191 | * improved WPS AP selection during WPS PIN iteration | |
192 | * added support for configuring GCMP cipher for IEEE 802.11ad | |
193 | * added support for Wi-Fi Display extensions | |
194 | - WFD_SUBELEMENT_SET ctrl_iface command to configure WFD subelements | |
195 | - SET wifi_display <0/1> to disable/enable WFD support | |
196 | - WFD service discovery | |
197 | - an external program is needed to manage the audio/video streaming | |
198 | and codecs | |
199 | * optimized scan result use for network selection | |
200 | - use the internal BSS table instead of raw scan results | |
201 | - allow unnecessary scans to be skipped if fresh information is | |
202 | available (e.g., after GAS/ANQP round for Interworking) | |
203 | * added support for 256-bit AES with internal TLS implementation | |
204 | * allow peer to propose channel in P2P invitation process for a | |
205 | persistent group | |
206 | * added disallow_aps parameter to allow BSSIDs/SSIDs to be disallowed | |
207 | from network selection | |
208 | * re-enable the networks disabled during WPS operations | |
209 | * allow P2P functionality to be disabled per interface (p2p_disabled=1) | |
210 | * added secondary device types into P2P_PEER output | |
211 | * added an option to disable use of a separate P2P group interface | |
212 | (p2p_no_group_iface=1) | |
213 | * fixed P2P Bonjour SD to match entries with both compressed and not | |
214 | compressed domain name format and support multiple Bonjour PTR matches | |
215 | for the same key | |
216 | * use deauthentication instead of disassociation for all disconnection | |
217 | operations; this removes the now unused disassociate() wpa_driver_ops | |
218 | callback | |
219 | * optimized PSK generation on P2P GO by caching results to avoid | |
220 | multiple PBKDF2 operations | |
221 | * added okc=1 global configuration parameter to allow OKC to be enabled | |
222 | by default for all network blocks | |
223 | * added a workaround for WPS PBC session overlap detection to avoid | |
224 | interop issues with deployed station implementations that do not | |
225 | remove active PBC indication from Probe Request frames properly | |
226 | ||
ec4a5d32 JM |
227 | 2012-05-10 - v1.0 |
228 | * bsd: Add support for setting HT values in IFM_MMASK. | |
229 | * Delay STA entry removal until Deauth/Disassoc TX status in AP mode. | |
230 | This allows the driver to use PS buffering of Deauthentication and | |
231 | Disassociation frames when the STA is in power save sleep. Only | |
232 | available with drivers that provide TX status events for Deauth/ | |
233 | Disassoc frames (nl80211). | |
234 | * Drop oldest unknown BSS table entries first. This makes it less | |
235 | likely to hit connection issues in environments with huge number | |
236 | of visible APs. | |
237 | * Add systemd support. | |
238 | * Add support for setting the syslog facility from the config file | |
239 | at build time. | |
240 | * atheros: Add support for IEEE 802.11w configuration. | |
241 | * AP mode: Allow enable HT20 if driver supports it, by setting the | |
242 | config parameter ieee80211n. | |
243 | * Allow AP mode to disconnect STAs based on low ACK condition (when | |
244 | the data connection is not working properly, e.g., due to the STA | |
245 | going outside the range of the AP). Disabled by default, enable by | |
246 | config option disassoc_low_ack. | |
247 | * nl80211: | |
248 | - Support GTK rekey offload. | |
249 | - Support PMKSA candidate events. This adds support for RSN | |
250 | pre-authentication with nl80211 interface and drivers that handle | |
251 | roaming internally. | |
252 | * dbus: | |
253 | - Add a DBus signal for EAP SM requests, emitted on the Interface | |
254 | object. | |
255 | - Export max scan ssids supported by the driver as MaxScanSSID. | |
256 | - Add signal Certification for information about server certification. | |
257 | - Add BSSExpireAge and BSSExpireCount interface properties and | |
258 | support set/get, which allows for setting BSS cache expiration age | |
259 | and expiration scan count. | |
260 | - Add ConfigFile to AddInterface properties. | |
261 | - Add Interface.Country property and support to get/set the value. | |
262 | - Add DBus property CurrentAuthMode. | |
263 | - P2P DBus API added. | |
264 | - Emit property changed events (for property BSSs) when adding/ | |
265 | removing BSSs. | |
266 | - Treat '' in SSIDs of Interface.Scan as a request for broadcast | |
267 | scan, instead of ignoring it. | |
268 | - Add DBus getter/setter for FastReauth. | |
269 | - Raise PropertiesChanged on org.freedesktop.DBus.Properties. | |
270 | * wpa_cli: | |
271 | - Send AP-STA-DISCONNECTED event when an AP disconnects a station | |
272 | due to inactivity. | |
273 | - Make second argument to set command optional. This can be used to | |
274 | indicate a zero length value. | |
275 | - Add signal_poll command. | |
276 | - Add bss_expire_age and bss_expire_count commands to set/get BSS | |
277 | cache expiration age and expiration scan count. | |
278 | - Add ability to set scan interval (the time in seconds wpa_s waits | |
279 | before requesting a new scan after failing to find a suitable | |
280 | network in scan results) using scan_interval command. | |
281 | - Add event CTRL-EVENT-ASSOC-REJECT for association rejected. | |
282 | - Add command get version, that returns wpa_supplicant version string. | |
283 | - Add command sta_autoconnect for disabling automatic reconnection | |
284 | on receiving disconnection event. | |
285 | - Setting bssid parameter to an empty string "" or any can now be | |
286 | used to clear the bssid_set flag in a network block, i.e., to remove | |
287 | bssid filtering. | |
288 | - Add tdls_testing command to add a special testing feature for | |
289 | changing TDLS behavior. Build param CONFIG_TDLS_TESTING must be | |
290 | enabled as well. | |
291 | - For interworking, add wpa_cli commands interworking_select, | |
292 | interworking_connect, anqp_get, fetch_anqp, and stop_fetch_anqp. | |
293 | - Many P2P commands were added. See README-P2P. | |
294 | - Many WPS/WPS ER commands - see WPS/WPS ER sections for details. | |
295 | - Allow set command to change global config parameters. | |
296 | - Add log_level command, which can be used to display the current | |
297 | debugging level and to change the log level during run time. | |
298 | - Add note command, which can be used to insert notes to the debug | |
299 | log. | |
300 | - Add internal line edit implementation. CONFIG_WPA_CLI_EDIT=y | |
301 | can now be used to build wpa_cli with internal implementation of | |
302 | line editing and history support. This can be used as a replacement | |
303 | for CONFIG_READLINE=y. | |
304 | * AP mode: Add max_num_sta config option, which can be used to limit | |
305 | the number of stations allowed to connect to the AP. | |
306 | * Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad | |
307 | config file. | |
308 | * wext: Increase scan timeout from 5 to 10 seconds. | |
309 | * Add blacklist command, allowing an external program to | |
310 | manage the BSS blacklist and display its current contents. | |
311 | * WPS: | |
312 | - Add wpa_cli wps_pin get command for generating random PINs. This can | |
313 | be used in a UI to generate a PIN without starting WPS (or P2P) | |
314 | operation. | |
315 | - Set RF bands based on driver capabilities, instead of hardcoding | |
316 | them. | |
317 | - Add mechanism for indicating non-standard WPS errors. | |
318 | - Add CONFIG_WPS_REG_DISABLE_OPEN=y option to disable open networks | |
319 | by default. | |
320 | - Add wps_ap_pin cli command for wpa_supplicant AP mode. | |
321 | - Add wps_check_pin cli command for processing PIN from user input. | |
322 | UIs can use this command to process a PIN entered by a user and to | |
323 | validate the checksum digit (if present). | |
324 | - Cancel WPS operation on PBC session overlap detection. | |
325 | - New wps_cancel command in wpa_cli will cancel a pending WPS | |
326 | operation. | |
327 | - wpa_cli action: Add WPS_EVENT_SUCCESS and WPS_EVENT_FAIL handlers. | |
328 | - Trigger WPS config update on Manufacturer, Model Name, Model | |
329 | Number, and Serial Number changes. | |
330 | - Fragment size is now configurable for EAP-WSC peer. Use | |
331 | wpa_cli set wps_fragment_size <val>. | |
332 | - Disable AP PIN after 10 consecutive failures. Slow down attacks on | |
333 | failures up to 10. | |
334 | - Allow AP to start in Enrollee mode without AP PIN for probing, to | |
335 | be compatible with Windows 7. | |
336 | - Add Config Error into WPS-FAIL events to provide more info to the | |
337 | user on how to resolve the issue. | |
338 | - Label and Display config methods are not allowed to be enabled | |
339 | at the same time, since it is unclear which PIN to use if both | |
340 | methods are advertised. | |
341 | - When controlling multiple interfaces: | |
342 | - apply WPS commands to all interfaces configured to use WPS | |
343 | - apply WPS config changes to all interfaces that use WPS | |
344 | - when an attack is detected on any interface, disable AP PIN on | |
345 | all interfaces | |
346 | * WPS ER: | |
347 | - Add special AP Setup Locked mode to allow read only ER. | |
348 | ap_setup_locked=2 can now be used to enable a special mode where | |
349 | WPS ER can learn the current AP settings, but cannot change them. | |
350 | - Show SetSelectedRegistrar events as ctrl_iface events | |
351 | - Add wps_er_set_config to enroll a network based on a local | |
352 | network configuration block instead of having to (re-)learn the | |
353 | current AP settings with wps_er_learn. | |
354 | - Allow AP filtering based on IP address, add ctrl_iface event for | |
355 | learned AP settings, add wps_er_config command to configure an AP. | |
356 | * WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2) | |
357 | - Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool | |
358 | for testing protocol extensibility. | |
359 | - Add build option CONFIG_WPS_STRICT to allow disabling of WPS | |
360 | workarounds. | |
361 | - Add support for AuthorizedMACs attribute. | |
362 | * TDLS: | |
363 | - Propogate TDLS related nl80211 capability flags from kernel and | |
364 | add them as driver capability flags. If the driver doesn't support | |
365 | capabilities, assume TDLS is supported internally. When TDLS is | |
366 | explicitly not supported, disable all user facing TDLS operations. | |
367 | - Allow TDLS to be disabled at runtime (mostly for testing). | |
368 | Use set tdls_disabled. | |
369 | - Honor AP TDLS settings that prohibit/allow TDLS. | |
370 | - Add a special testing feature for changing TDLS behavior. Use | |
371 | CONFIG_TDLS_TESTING build param to enable. Configure at runtime | |
372 | with tdls_testing cli command. | |
373 | - Add support for TDLS 802.11z. | |
374 | * wlantest: Add a tool wlantest for IEEE802.11 protocol testing. | |
375 | wlantest can be used to capture frames from a monitor interface | |
376 | for realtime capturing or from pcap files for offline analysis. | |
377 | * Interworking: Support added for 802.11u. Enable in .config with | |
378 | CONFIG_INTERWORKING. See wpa_supplicant.conf for config parameters | |
379 | for interworking. wpa_cli commands added to support this are | |
380 | interworking_select, interworking_connect, anqp_get, fetch_anqp, | |
381 | and stop_fetch_anqp. | |
382 | * Android: Add build and runtime support for Android wpa_supplicant. | |
383 | * bgscan learn: Add new bgscan that learns BSS information based on | |
384 | previous scans, and uses that information to dynamically generate | |
385 | the list of channels for background scans. | |
386 | * Add a new debug message level for excessive information. Use | |
387 | -ddd to enable. | |
388 | * TLS: Add support for tls_disable_time_checks=1 in client mode. | |
389 | * Internal TLS: | |
390 | - Add support for TLS v1.1 (RFC 4346). Enable with build parameter | |
391 | CONFIG_TLSV11. | |
392 | - Add domainComponent parser for X.509 names. | |
393 | * Linux: Add RFKill support by adding an interface state "disabled". | |
394 | * Reorder some IEs to get closer to IEEE 802.11 standard. Move | |
395 | WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames. | |
396 | Move HT IEs to be later in (Re)Assoc Resp. | |
397 | * Solaris: Add support for wired 802.1X client. | |
398 | * Wi-Fi Direct support. See README-P2P for more information. | |
399 | * Many bugfixes. | |
400 | ||
be48214d JM |
401 | 2010-04-18 - v0.7.2 |
402 | * nl80211: fixed number of issues with roaming | |
403 | * avoid unnecessary roaming if multiple APs with similar signal | |
404 | strength are present in scan results | |
405 | * add TLS client events and server probing to ease design of | |
406 | automatic detection of EAP parameters | |
407 | * add option for server certificate matching (SHA256 hash of the | |
408 | certificate) instead of trusted CA certificate configuration | |
409 | * bsd: Cleaned up driver wrapper and added various low-level | |
410 | configuration options | |
411 | * wpa_gui-qt4: do not show too frequent WPS AP available events as | |
412 | tray messages | |
413 | * TNC: fixed issues with fragmentation | |
414 | * EAP-TNC: add Flags field into fragment acknowledgement (needed to | |
415 | interoperate with other implementations; may potentially breaks | |
416 | compatibility with older wpa_supplicant/hostapd versions) | |
417 | * wpa_cli: added option for using a separate process to receive event | |
418 | messages to reduce latency in showing these | |
419 | (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) | |
420 | * maximum BSS table size can now be configured (bss_max_count) | |
421 | * BSSes to be included in the BSS table can be filtered based on | |
422 | configured SSIDs to save memory (filter_ssids) | |
423 | * fix number of issues with IEEE 802.11r/FT; this version is not | |
424 | backwards compatible with old versions | |
425 | * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air | |
426 | and over-the-DS) | |
427 | * add freq_list network configuration parameter to allow the AP | |
428 | selection to filter out entries based on the operating channel | |
429 | * add signal strength change events for bgscan; this allows more | |
430 | dynamic changes to background scanning interval based on changes in | |
431 | the signal strength with the current AP; this improves roaming within | |
432 | ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network | |
433 | configuration block to request background scans less frequently when | |
434 | signal strength remains good and to automatically trigger background | |
435 | scans whenever signal strength drops noticeably | |
436 | (this is currently only available with nl80211) | |
437 | * add BSSID and reason code (if available) to disconnect event messages | |
438 | * wpa_gui-qt4: more complete support for translating the GUI with | |
439 | linguist and add German translation | |
440 | * fix DH padding with internal crypto code (mainly, for WPS) | |
441 | * do not trigger initial scan automatically anymore if there are no | |
442 | enabled networks | |
443 | ||
dff0f701 JM |
444 | 2010-01-16 - v0.7.1 |
445 | * cleaned up driver wrapper API (struct wpa_driver_ops); the new API | |
446 | is not fully backwards compatible, so out-of-tree driver wrappers | |
447 | will need modifications | |
448 | * cleaned up various module interfaces | |
449 | * merge hostapd and wpa_supplicant developers' documentation into a | |
450 | single document | |
451 | * nl80211: use explicit deauthentication to clear cfg80211 state to | |
452 | avoid issues when roaming between APs | |
453 | * dbus: major design changes in the new D-Bus API | |
454 | (fi.w1.wpa_supplicant1) | |
455 | * nl80211: added support for IBSS networks | |
456 | * added internal debugging mechanism with backtrace support and memory | |
457 | allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) | |
458 | * added WPS ER unsubscription command to more cleanly unregister from | |
459 | receiving UPnP events when ER is terminated | |
460 | * cleaned up AP mode operations to avoid need for virtual driver_ops | |
461 | wrapper | |
462 | * added BSS table to maintain more complete scan result information | |
463 | over multiple scans (that may include only partial results) | |
464 | * wpa_gui-qt4: update Peers dialog information more dynamically while | |
465 | the dialog is kept open | |
466 | * fixed PKCS#12 use with OpenSSL 1.0.0 | |
467 | * driver_wext: Added cfg80211-specific optimization to avoid some | |
468 | unnecessary scans and to speed up association | |
469 | ||
224f7bda | 470 | 2009-11-21 - v0.7.0 |
1cc84c1c JM |
471 | * increased wpa_cli ping interval to 5 seconds and made this |
472 | configurable with a new command line options (-G<seconds>) | |
42f1ee7d JM |
473 | * fixed scan buffer processing with WEXT to handle up to 65535 |
474 | byte result buffer (previously, limited to 32768 bytes) | |
362f781e JM |
475 | * allow multiple driver wrappers to be specified on command line |
476 | (e.g., -Dnl80211,wext); the first one that is able to initialize the | |
477 | interface will be used | |
6a1063e0 JM |
478 | * added support for multiple SSIDs per scan request to optimize |
479 | scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden | |
480 | SSIDs); this requires driver support and can currently be used only | |
481 | with nl80211 | |
f4c617ee JM |
482 | * added support for WPS USBA out-of-band mechanism with USB Flash |
483 | Drives (UFD) (CONFIG_WPS_UFD=y) | |
c472ef75 JM |
484 | * driver_ndis: add PAE group address to the multicast address list to |
485 | fix wired IEEE 802.1X authentication | |
4cb0dcd9 JM |
486 | * fixed IEEE 802.11r key derivation function to match with the standard |
487 | (note: this breaks interoperability with previous version) [Bug 303] | |
c2a04078 JM |
488 | * added better support for drivers that allow separate authentication |
489 | and association commands (e.g., mac80211-based Linux drivers with | |
490 | nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol | |
491 | to be used (IEEE 802.11r) | |
c0a61908 JM |
492 | * fixed SHA-256 based key derivation function to match with the |
493 | standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) | |
494 | (note: this breaks interoperability with previous version) [Bug 307] | |
56360b16 JM |
495 | * use shared driver wrapper files with hostapd |
496 | * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network | |
497 | block; this can be used for open and WPA2-Personal networks | |
498 | (optionally, with WPS); this links in parts of hostapd functionality | |
499 | into wpa_supplicant | |
500 | * wpa_gui-qt4: added new Peers dialog to show information about peers | |
501 | (other devices, including APs and stations, etc. in the neighborhood) | |
502 | * added support for WPS External Registrar functionality (configure APs | |
503 | and enroll new devices); can be used with wpa_gui-qt4 Peers dialog | |
504 | and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, | |
505 | wps_er_pbc, wps_er_learn | |
506 | (this can also be used with a new 'none' driver wrapper if no | |
507 | wireless device or IEEE 802.1X on wired is needed) | |
508 | * driver_nl80211: multiple updates to provide support for new Linux | |
509 | nl80211/mac80211 functionality | |
510 | * updated management frame protection to use IEEE Std 802.11w-2009 | |
511 | * fixed number of small WPS issues and added workarounds to | |
512 | interoperate with common deployed broken implementations | |
513 | * added support for NFC out-of-band mechanism with WPS | |
514 | * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group | |
515 | address frames | |
516 | * added preliminary support for IEEE 802.11r RIC processing | |
517 | * added support for specifying subset of enabled frequencies to scan | |
518 | (scan_freq option in the network configuration block); this can speed | |
519 | up scanning process considerably if it is known that only a small | |
520 | subset of channels is actually used in the network (this is currently | |
521 | supported only with -Dnl80211) | |
522 | * added a workaround for race condition between receiving the | |
523 | association event and the following EAPOL-Key | |
524 | * added background scan and roaming infrastructure to allow | |
525 | network-specific optimizations to be used to improve roaming within | |
526 | an ESS (same SSID) | |
527 | * added new DBus interface (fi.w1.wpa_supplicant1) | |
1cc84c1c | 528 | |
6f78f2fb | 529 | 2009-01-06 - v0.6.7 |
30f5c941 JM |
530 | * added support for Wi-Fi Protected Setup (WPS) |
531 | (wpa_supplicant can now be configured to act as a WPS Enrollee to | |
532 | enroll credentials for a network using PIN and PBC methods; in | |
533 | addition, wpa_supplicant can act as a wireless WPS Registrar to | |
534 | configure an AP); WPS support can be enabled by adding CONFIG_WPS=y | |
535 | into .config and setting the runtime configuration variables in | |
536 | wpa_supplicant.conf (see WPS section in the example configuration | |
537 | file); new wpa_cli commands wps_pin, wps_pbc, and wps_reg are used to | |
538 | manage WPS negotiation; see README-WPS for more details | |
a9d1364c | 539 | * added support for EAP-AKA' (draft-arkko-eap-aka-kdf) |
e33bbd8f | 540 | * added support for using driver_test over UDP socket |
f4f2774a JM |
541 | * fixed PEAPv0 Cryptobinding interoperability issue with Windows Server |
542 | 2008 NPS; optional cryptobinding is now enabled (again) by default | |
c3ece504 | 543 | * fixed PSK editing in wpa_gui |
a2b3a34b | 544 | * changed EAP-GPSK to use the IANA assigned EAP method type 51 |
c674a55d JM |
545 | * added a Windows installer that includes WinPcap and all the needed |
546 | DLLs; in addition, it set up the registry automatically so that user | |
547 | will only need start wpa_gui to get prompted to start the wpasvc | |
548 | servide and add a new interface if needed through wpa_gui dialog | |
cae93bdc | 549 | * updated management frame protection to use IEEE 802.11w/D7.0 |
a9d1364c | 550 | |
6e89cc43 | 551 | 2008-11-23 - v0.6.6 |
81eec387 JM |
552 | * added Milenage SIM/USIM emulator for EAP-SIM/EAP-AKA |
553 | (can be used to simulate test SIM/USIM card with a known private key; | |
554 | enable with CONFIG_SIM_SIMULATOR=y/CONFIG_USIM_SIMULATOR=y in .config | |
555 | and password="Ki:OPc"/password="Ki:OPc:SQN" in network configuration) | |
581a8cde JM |
556 | * added a new network configuration option, wpa_ptk_rekey, that can be |
557 | used to enforce frequent PTK rekeying, e.g., to mitigate some attacks | |
558 | against TKIP deficiencies | |
46690a3b JM |
559 | * added an optional mitigation mechanism for certain attacks against |
560 | TKIP by delaying Michael MIC error reports by a random amount of time | |
561 | between 0 and 60 seconds; this can be enabled with a build option | |
562 | CONFIG_DELAYED_MIC_ERROR_REPORT=y in .config | |
fa71a1d8 JM |
563 | * fixed EAP-AKA to use RES Length field in AT_RES as length in bits, |
564 | not bytes | |
0cf03892 JM |
565 | * updated OpenSSL code for EAP-FAST to use an updated version of the |
566 | session ticket overriding API that was included into the upstream | |
567 | OpenSSL 0.9.9 tree on 2008-11-15 (no additional OpenSSL patch is | |
568 | needed with that version anymore) | |
cd35db9f JM |
569 | * updated userspace MLME instructions to match with the current Linux |
570 | mac80211 implementation; please also note that this can only be used | |
571 | with driver_nl80211.c (the old code from driver_wext.c was removed) | |
e519314e JW |
572 | * added support (Linux only) for RoboSwitch chipsets (often found in |
573 | consumer grade routers); driver interface 'roboswitch' | |
1ac2d4a9 JM |
574 | * fixed canceling of PMKSA caching when using drivers that generate |
575 | RSN IE and refuse to drop PMKIDs that wpa_supplicant does not know | |
576 | about | |
2a24bb31 | 577 | |
988ab690 | 578 | 2008-11-01 - v0.6.5 |
1d8ce433 JM |
579 | * added support for SHA-256 as X.509 certificate digest when using the |
580 | internal X.509/TLSv1 implementation | |
5d22a1d5 | 581 | * updated management frame protection to use IEEE 802.11w/D6.0 |
56586197 JM |
582 | * added support for using SHA256-based stronger key derivation for WPA2 |
583 | (IEEE 802.11w) | |
c6845259 JM |
584 | * fixed FT (IEEE 802.11r) authentication after a failed association to |
585 | use correct FTIE | |
8de59496 JM |
586 | * added support for configuring Phase 2 (inner/tunneled) authentication |
587 | method with wpa_gui-qt4 | |
1d8ce433 | 588 | |
d48ae45b | 589 | 2008-08-10 - v0.6.4 |
7914585f | 590 | * added support for EAP Sequences in EAP-FAST Phase 2 |
4f1c5617 | 591 | * added support for using TNC with EAP-FAST |
b5a357b4 | 592 | * added driver_ps3 for the PS3 Linux wireless driver |
e7d80033 | 593 | * added support for optional cryptobinding with PEAPv0 |
fe2b7dda JM |
594 | * fixed the OpenSSL patches (0.9.8g and 0.9.9) for EAP-FAST to |
595 | allow fallback to full handshake if server rejects PAC-Opaque | |
1b52ea47 | 596 | * added fragmentation support for EAP-TNC |
d952d16d JM |
597 | * added support for parsing PKCS #8 formatted private keys into the |
598 | internal TLS implementation (both PKCS #1 RSA key and PKCS #8 | |
599 | encapsulated RSA key can now be used) | |
b95394c6 JM |
600 | * added option of using faster, but larger, routines in the internal |
601 | LibTomMath (for internal TLS implementation) to speed up DH and RSA | |
602 | calculations (CONFIG_INTERNAL_LIBTOMMATH_FAST=y) | |
3e2ad1b9 JM |
603 | * fixed race condition between disassociation event and group key |
604 | handshake to avoid getting stuck in incorrect state [Bug 261] | |
3ff77e07 | 605 | * fixed opportunistic key caching (proactive_key_caching) |
7914585f | 606 | |
6fc6879b JM |
607 | 2008-02-22 - v0.6.3 |
608 | * removed 'nai' and 'eappsk' network configuration variables that were | |
609 | previously used for configuring user identity and key for EAP-PSK, | |
610 | EAP-PAX, EAP-SAKE, and EAP-GPSK. 'identity' field is now used as the | |
611 | replacement for 'nai' (if old configuration used a separate | |
612 | 'identity' value, that would now be configured as | |
613 | 'anonymous_identity'). 'password' field is now used as the | |
614 | replacement for 'eappsk' (it can also be set using hexstring to | |
615 | present random binary data) | |
616 | * removed '-w' command line parameter (wait for interface to be added, | |
617 | if needed); cleaner way of handling this functionality is to use an | |
618 | external mechanism (e.g., hotplug scripts) that start wpa_supplicant | |
619 | when an interface is added | |
620 | * updated FT support to use the latest draft, IEEE 802.11r/D9.0 | |
621 | * added ctrl_iface monitor event (CTRL-EVENT-SCAN-RESULTS) for | |
622 | indicating when new scan results become available | |
623 | * added new ctrl_iface command, BSS, to allow scan results to be | |
624 | fetched without hitting the message size limits (this command | |
625 | can be used to iterate through the scan results one BSS at the time) | |
626 | * fixed EAP-SIM not to include AT_NONCE_MT and AT_SELECTED_VERSION | |
627 | attributes in EAP-SIM Start/Response when using fast reauthentication | |
628 | * fixed EAPOL not to end up in infinite loop when processing dynamic | |
629 | WEP keys with IEEE 802.1X | |
630 | * fixed problems in getting NDIS events from WMI on Windows 2000 | |
631 | ||
632 | 2008-01-01 - v0.6.2 | |
633 | * added support for Makefile builds to include debug-log-to-a-file | |
634 | functionality (CONFIG_DEBUG_FILE=y and -f<path> on command line) | |
635 | * fixed EAP-SIM and EAP-AKA message parser to validate attribute | |
636 | lengths properly to avoid potential crash caused by invalid messages | |
637 | * added data structure for storing allocated buffers (struct wpabuf); | |
638 | this does not affect wpa_supplicant usage, but many of the APIs | |
639 | changed and various interfaces (e.g., EAP) is not compatible with old | |
640 | versions | |
641 | * added support for protecting EAP-AKA/Identity messages with | |
642 | AT_CHECKCODE (optional feature in RFC 4187) | |
643 | * added support for protected result indication with AT_RESULT_IND for | |
644 | EAP-SIM and EAP-AKA (phase1="result_ind=1") | |
645 | * added driver_wext workaround for race condition between scanning and | |
646 | association with drivers that take very long time to scan all | |
647 | channels (e.g., madwifi with dual-band cards); wpa_supplicant is now | |
648 | using a longer hardcoded timeout for the scan if the driver supports | |
649 | notifications for scan completion (SIOCGIWSCAN event); this helps, | |
650 | e.g., in cases where wpa_supplicant and madwifi driver ended up in | |
651 | loop where the driver did not even try to associate | |
652 | * stop EAPOL timer tick when no timers are in use in order to reduce | |
653 | power consumption (no need to wake up the process once per second) | |
654 | [Bug 237] | |
655 | * added support for privilege separation (run only minimal part of | |
656 | wpa_supplicant functionality as root and rest as unprivileged, | |
657 | non-root process); see 'Privilege separation' in README for details; | |
658 | this is disabled by default and can be enabled with CONFIG_PRIVSEP=y | |
659 | in .config | |
660 | * changed scan results data structure to include all information | |
661 | elements to make it easier to support new IEs; old get_scan_result() | |
662 | driver_ops is still supported for backwards compatibility (results | |
663 | are converted internally to the new format), but all drivers should | |
664 | start using the new get_scan_results2() to make them more likely to | |
665 | work with new features | |
666 | * Qt4 version of wpa_gui (wpa_gui-qt4 subdirectory) is now native Qt4 | |
667 | application, i.e., it does not require Qt3Support anymore; Windows | |
668 | binary of wpa_gui.exe is now from this directory and only requires | |
669 | QtCore4.dll and QtGui4.dll libraries | |
670 | * updated Windows binary build to use Qt 4.3.3 and made Qt DLLs | |
671 | available as a separate package to make wpa_gui installation easier: | |
672 | http://w1.fi/wpa_supplicant/qt4/wpa_gui-qt433-windows-dll.zip | |
673 | * added support for EAP-IKEv2 (draft-tschofenig-eap-ikev2-15.txt); | |
674 | only shared key/password authentication is supported in this version | |
675 | ||
676 | 2007-11-24 - v0.6.1 | |
677 | * added support for configuring password as NtPasswordHash | |
678 | (16-byte MD4 hash of password) in hash:<32 hex digits> format | |
679 | * added support for fallback from abbreviated TLS handshake to | |
680 | full handshake when using EAP-FAST (e.g., due to an expired | |
681 | PAC-Opaque) | |
682 | * updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest | |
683 | draft (draft-ietf-emu-eap-gpsk-07.txt) | |
684 | * added support for drivers that take care of RSN 4-way handshake | |
685 | internally (WPA_DRIVER_FLAGS_4WAY_HANDSHAKE in get_capa flags and | |
686 | WPA_ALG_PMK in set_key) | |
687 | * added an experimental port for Mac OS X (CONFIG_DRIVER_OSX=y in | |
688 | .config); this version supports only ap_scan=2 mode and allow the | |
689 | driver to take care of the 4-way handshake | |
690 | * fixed a buffer overflow in parsing TSF from scan results when using | |
691 | driver_wext.c with a driver that includes the TSF (e.g., iwl4965) | |
692 | [Bug 232] | |
693 | * updated FT support to use the latest draft, IEEE 802.11r/D8.0 | |
694 | * fixed an integer overflow issue in the ASN.1 parser used by the | |
695 | (experimental) internal TLS implementation to avoid a potential | |
696 | buffer read overflow | |
697 | * fixed a race condition with -W option (wait for a control interface | |
698 | monitor before starting) that could have caused the first messages to | |
699 | be lost | |
700 | * added support for processing TNCC-TNCS-Messages to report | |
701 | recommendation (allow/none/isolate) when using TNC [Bug 243] | |
702 | ||
703 | 2007-05-28 - v0.6.0 | |
704 | * added network configuration parameter 'frequency' for setting | |
705 | initial channel for IBSS (adhoc) networks | |
706 | * added experimental IEEE 802.11r/D6.0 support | |
707 | * updated EAP-SAKE to RFC 4763 and the IANA-allocated EAP type 48 | |
708 | * updated EAP-PSK to use the IANA-allocated EAP type 47 | |
709 | * fixed EAP-PAX key derivation | |
710 | * fixed EAP-PSK bit ordering of the Flags field | |
711 | * fixed EAP-PEAP/TTLS/FAST to use the correct EAP identifier in | |
712 | tunnelled identity request (previously, the identifier from the outer | |
713 | method was used, not the tunnelled identifier which could be | |
714 | different) | |
715 | * added support for fragmentation of outer TLS packets during Phase 2 | |
716 | of EAP-PEAP/TTLS/FAST | |
717 | * fixed EAP-TTLS AVP parser processing for too short AVP lengths | |
718 | * added support for EAP-FAST authentication with inner methods that | |
719 | generate MSK (e.g., EAP-MSCHAPv2 that was previously only supported | |
720 | for PAC provisioning) | |
721 | * added support for authenticated EAP-FAST provisioning | |
722 | * added support for configuring maximum number of EAP-FAST PACs to | |
723 | store in a PAC list (fast_max_pac_list_len=<max> in phase1 string) | |
724 | * added support for storing EAP-FAST PACs in binary format | |
725 | (fast_pac_format=binary in phase1 string) | |
726 | * fixed dbus ctrl_iface to validate message interface before | |
727 | dispatching to avoid a possible segfault [Bug 190] | |
728 | * fixed PeerKey key derivation to use the correct PRF label | |
729 | * updated Windows binary build to link against OpenSSL 0.9.8d and | |
730 | added support for EAP-FAST | |
731 | * updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest | |
732 | draft (draft-ietf-emu-eap-gpsk-04.txt) | |
733 | * fixed EAP-AKA Notification processing to allow Notification to be | |
734 | processed after AKA Challenge response has been sent | |
735 | * updated to use IEEE 802.11w/D2.0 for management frame protection | |
736 | (still experimental) | |
737 | * fixed EAP-TTLS implementation not to crash on use of freed memory | |
738 | if TLS library initialization fails | |
739 | * added support for EAP-TNC (Trusted Network Connect) | |
740 | (this version implements the EAP-TNC method and EAP-TTLS changes | |
741 | needed to run two methods in sequence (IF-T) and the IF-IMC and | |
742 | IF-TNCCS interfaces from TNCC) | |
743 | ||
744 | 2006-11-24 - v0.5.6 | |
745 | * added experimental, integrated TLSv1 client implementation with the | |
746 | needed X.509/ASN.1/RSA/bignum processing (this can be enabled by | |
747 | setting CONFIG_TLS=internal and CONFIG_INTERNAL_LIBTOMMATH=y in | |
748 | .config); this can be useful, e.g., if the target system does not | |
749 | have a suitable TLS library and a minimal code size is required | |
750 | (total size of this internal TLS/crypto code is bit under 50 kB on | |
751 | x86 and the crypto code is shared by rest of the supplicant so some | |
752 | of it was already required; TLSv1/X.509/ASN.1/RSA added about 25 kB) | |
753 | * removed STAKey handshake since PeerKey handshake has replaced it in | |
754 | IEEE 802.11ma and there are no known deployments of STAKey | |
755 | * updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest | |
756 | draft (draft-ietf-emu-eap-gpsk-01.txt) | |
757 | * added preliminary implementation of IEEE 802.11w/D1.0 (management | |
758 | frame protection) | |
759 | (Note: this requires driver support to work properly.) | |
760 | (Note2: IEEE 802.11w is an unapproved draft and subject to change.) | |
761 | * fixed Windows named pipes ctrl_iface to not stop listening for | |
762 | commands if client program opens a named pipe and closes it | |
763 | immediately without sending a command | |
764 | * fixed USIM PIN status determination for the case that PIN is not | |
765 | needed (this allows EAP-AKA to be used with USIM cards that do not | |
766 | use PIN) | |
767 | * added support for reading 3G USIM AID from EF_DIR to allow EAP-AKA to | |
768 | be used with cards that do not support file selection based on | |
769 | partial AID | |
770 | * added support for matching the subjectAltName of the authentication | |
771 | server certificate against multiple name components (e.g., | |
772 | altsubject_match="DNS:server.example.com;DNS:server2.example.com") | |
773 | * fixed EAP-SIM/AKA key derivation for re-authentication case (only | |
774 | affects IEEE 802.1X with dynamic WEP keys) | |
775 | * changed ctrl_iface network configuration 'get' operations to not | |
776 | return password/key material; if these fields are requested, "*" | |
777 | will be returned if the password/key is set, but the value of the | |
778 | parameter is not exposed | |
779 | ||
780 | 2006-08-27 - v0.5.5 | |
781 | * added support for building Windows version with UNICODE defined | |
782 | (wide-char functions) | |
783 | * driver_ndis: fixed static WEP configuration to avoid race condition | |
784 | issues with some NDIS drivers between association and setting WEP | |
785 | keys | |
786 | * driver_ndis: added validation for IELength value in scan results to | |
787 | avoid crashes when using buggy NDIS drivers [Bug 165] | |
788 | * fixed Release|Win32 target in the Visual Studio project files | |
789 | (previously, only Debug|Win32 target was set properly) | |
790 | * changed control interface API call wpa_ctrl_pending() to allow it to | |
791 | return -1 on error (e.g., connection lost); control interface clients | |
792 | will need to make sure that they verify that the value is indeed >0 | |
793 | when determining whether there are pending messages | |
794 | * added an alternative control interface backend for Windows targets: | |
795 | Named Pipe (CONFIG_CTRL_IFACE=named_pipe); this is now the default | |
796 | control interface mechanism for Windows builds (previously, UDP to | |
797 | localhost was used) | |
798 | * changed ctrl_interface configuration for UNIX domain sockets: | |
799 | - deprecated ctrl_interface_group variable (it may be removed in | |
800 | future versions) | |
801 | - allow both directory and group be configured with ctrl_interface | |
802 | in following format: DIR=/var/run/wpa_supplicant GROUP=wheel | |
803 | - ctrl_interface=/var/run/wpa_supplicant is still supported for the | |
804 | case when group is not changed | |
805 | * added support for controlling more than one interface per process in | |
806 | Windows version | |
807 | * added a workaround for a case where the AP is using unknown address | |
808 | (e.g., MAC address of the wired interface) as the source address for | |
809 | EAPOL-Key frames; previously, that source address was used as the | |
810 | destination for EAPOL-Key frames and in key derivation; now, BSSID is | |
811 | used even if the source address does not match with it | |
812 | (this resolves an interoperability issue with Thomson SpeedTouch 580) | |
813 | * added a workaround for UDP-based control interface (which was used in | |
814 | Windows builds before this release) to prevent packets with forged | |
815 | addresses from being accepted as local control requests | |
816 | * removed ndis_events.cpp and possibility of using external | |
817 | ndis_events.exe; C version (ndis_events.c) is fully functional and | |
818 | there is no desire to maintain two separate versions of this | |
819 | implementation | |
820 | * ndis_events: Changed NDIS event notification design to use WMI to | |
821 | learn the adapter description through Win32_PnPEntity class; this | |
822 | should fix some cases where the adapter name was not recognized | |
823 | correctly (e.g., with some USB WLAN adapters, e.g., Ralink RT2500 | |
824 | USB) [Bug 113] | |
825 | * fixed selection of the first network in ap_scan=2 mode; previously, | |
826 | wpa_supplicant could get stuck in SCANNING state when only the first | |
827 | network for enabled (e.g., after 'wpa_cli select_network 0') | |
828 | * winsvc: added support for configuring ctrl_interface parameters in | |
829 | registry (ctrl_interface string value in | |
830 | HKLM\SOFTWARE\wpa_supplicant\interfaces\0000 key); this new value is | |
831 | required to enable control interface (previously, this was hardcoded | |
832 | to be enabled) | |
833 | * allow wpa_gui subdirectory to be built with both Qt3 and Qt4 | |
834 | * converted wpa_gui-qt4 subdirectory to use Qt4 specific project format | |
835 | ||
836 | 2006-06-20 - v0.5.4 | |
837 | * fixed build with CONFIG_STAKEY=y [Bug 143] | |
838 | * added support for doing MLME (IEEE 802.11 management frame | |
839 | processing) in wpa_supplicant when using Devicescape IEEE 802.11 | |
840 | stack (wireless-dev.git tree) | |
841 | * added a new network block configuration option, fragment_size, to | |
842 | configure the maximum EAP fragment size | |
843 | * driver_ndis: Disable WZC automatically for the selected interface to | |
844 | avoid conflicts with two programs trying to control the radio; WZC | |
845 | will be re-enabled (if it was enabled originally) when wpa_supplicant | |
846 | is terminated | |
847 | * added an experimental TLSv1 client implementation | |
848 | (CONFIG_TLS=internal) that can be used instead of an external TLS | |
849 | library, e.g., to reduce total size requirement on systems that do | |
850 | not include any TLS library by default (this is not yet complete; | |
851 | basic functionality is there, but certificate validation is not yet | |
852 | included) | |
853 | * added PeerKey handshake implementation for IEEE 802.11e | |
854 | direct link setup (DLS) to replace STAKey handshake | |
855 | * fixed WPA PSK update through ctrl_iface for the case where the old | |
856 | PSK was derived from an ASCII passphrase and the new PSK is set as | |
857 | a raw PSK (hex string) | |
858 | * added new configuration option for identifying which network block | |
859 | was used (id_str in wpa_supplicant.conf; included on | |
860 | WPA_EVENT_CONNECT monitor event and as WPA_ID_STR environmental | |
861 | variable in wpa_cli action scripts; in addition WPA_ID variable is | |
862 | set to the current unique identifier that wpa_supplicant assigned | |
863 | automatically for the network and that can be used with | |
864 | GET_NETWORK/SET_NETWORK ctrl_iface commands) | |
865 | * wpa_cli action script is now called only when the connect/disconnect | |
866 | status changes or when associating with a different network | |
867 | * fixed configuration parser not to remove CCMP from group cipher list | |
868 | if WPA-None (adhoc) is used (pairwise=NONE in that case) | |
869 | * fixed integrated NDIS events processing not to hang the process due | |
870 | to a missed change in eloop_win.c API in v0.5.3 [Bug 155] | |
871 | * added support for EAP Generalized Pre-Shared Key (EAP-GPSK, | |
872 | draft-clancy-emu-eap-shared-secret-00.txt) | |
873 | * added Microsoft Visual Studio 2005 solution and project files for | |
874 | build wpa_supplicant for Windows (see vs2005 subdirectory) | |
875 | * eloop_win: fixed unregistration of Windows events | |
876 | * l2_packet_winpcap: fixed a deadlock in deinitializing l2_packet | |
877 | at the end of RSN pre-authentication and added unregistration of | |
878 | a Windows event to avoid getting eloop_win stuck with an invalid | |
879 | handle | |
880 | * driver_ndis: added support for selecting AP based on BSSID | |
881 | * added new environmental variable for wpa_cli action scripts: | |
882 | WPA_CTRL_DIR is the current control interface directory | |
883 | * driver_ndis: added support for using NDISUIO instead of WinPcap for | |
884 | OID set/query operations (CONFIG_USE_NDISUIO=y in .config); with new | |
885 | l2_packet_ndis (CONFIG_L2_PACKET=ndis), this can be used to build | |
886 | wpa_supplicant without requiring WinPcap; note that using NDISUIO | |
887 | requires that WZC is disabled (net stop wzcsvc) since NDISUIO allows | |
888 | only one application to open the device | |
889 | * changed NDIS driver naming to only include device GUID, e.g., | |
890 | {7EE3EFE5-C165-472F-986D-F6FBEDFE8C8D}, instead of including WinPcap | |
891 | specific \Device\NPF_ prefix before the GUID; the prefix is still | |
892 | allowed for backwards compatibility, but it is not required anymore | |
893 | when specifying the interface | |
894 | * driver_ndis: re-initialize driver interface is the adapter is removed | |
895 | and re-inserted [Bug 159] | |
896 | * driver_madwifi: fixed TKIP and CCMP sequence number configuration on | |
897 | big endian hosts [Bug 146] | |
898 | ||
899 | 2006-04-27 - v0.5.3 | |
900 | * fixed EAP-GTC response to include correct user identity when run as | |
901 | phase 2 method of EAP-FAST (i.e., EAP-FAST did not work in v0.5.2) | |
902 | * driver_ndis: Fixed encryption mode configuration for unencrypted | |
903 | networks (some NDIS drivers ignored this, but others, e.g., Broadcom, | |
904 | refused to associate with open networks) [Bug 106] | |
905 | * driver_ndis: use BSSID OID polling to detect when IBSS network is | |
906 | formed even when ndis_events code is included since some NDIS drivers | |
907 | do not generate media connect events in IBSS mode | |
908 | * config_winreg: allow global ctrl_interface parameter to be configured | |
909 | in Windows registry | |
910 | * config_winreg: added support for saving configuration data into | |
911 | Windows registry | |
912 | * added support for controlling network device operational state | |
913 | (dormant/up) for Linux 2.6.17 to improve DHCP processing (see | |
914 | http://www.flamewarmaster.de/software/dhcpclient/ for a DHCP client | |
915 | that can use this information) | |
916 | * driver_wext: added support for WE-21 change to SSID configuration | |
917 | * driver_wext: fixed privacy configuration for static WEP keys mode | |
918 | [Bug 140] | |
919 | * added an optional driver_ops callback for MLME-SETPROTECTION.request | |
920 | primitive | |
921 | * added support for EAP-SAKE (no EAP method number allocated yet, so | |
922 | this is using the same experimental type 255 as EAP-PSK) | |
923 | * added support for dynamically loading EAP methods (.so files) instead | |
924 | of requiring them to be statically linked in; this is disabled by | |
925 | default (see CONFIG_DYNAMIC_EAP_METHODS in defconfig for information | |
926 | on how to use this) | |
927 | ||
928 | 2006-03-19 - v0.5.2 | |
929 | * do not try to use USIM APDUs when initializing PC/SC for SIM card | |
930 | access for a network that has not enabled EAP-AKA | |
931 | * fixed EAP phase 2 Nak for EAP-{PEAP,TTLS,FAST} (this was broken in | |
932 | v0.5.1 due to the new support for expanded EAP types) | |
933 | * added support for generating EAP Expanded Nak | |
934 | * try to fetch scan results once before requesting new scan when | |
935 | starting up in ap_scan=1 mode (this can speed up initial association | |
936 | a lot with, e.g., madwifi-ng driver) | |
937 | * added support for receiving EAPOL frames from a Linux bridge | |
938 | interface (-bbr0 on command line) | |
939 | * fixed EAPOL re-authentication for sessions that used PMKSA caching | |
940 | * changed EAP method registration to use a dynamic list of methods | |
941 | instead of a static list generated at build time | |
942 | * fixed PMKSA cache deinitialization not to use freed memory when | |
943 | removing PMKSA entries | |
944 | * fixed a memory leak in EAP-TTLS re-authentication | |
945 | * reject WPA/WPA2 message 3/4 if it does not include any valid | |
946 | WPA/RSN IE | |
947 | * driver_wext: added fallback to use SIOCSIWENCODE for setting auth_alg | |
948 | if the driver does not support SIOCSIWAUTH | |
949 | ||
950 | 2006-01-29 - v0.5.1 | |
951 | * driver_test: added better support for multiple APs and STAs by using | |
952 | a directory with sockets that include MAC address for each device in | |
953 | the name (driver_param=test_dir=/tmp/test) | |
954 | * added support for EAP expanded type (vendor specific EAP methods) | |
955 | * added AP_SCAN command into ctrl_iface so that ap_scan configuration | |
956 | option can be changed if needed | |
957 | * wpa_cli/wpa_gui: skip non-socket files in control directory when | |
958 | using UNIX domain sockets; this avoids selecting an incorrect | |
959 | interface (e.g., a PID file could be in this directory, even though | |
960 | use of this directory for something else than socket files is not | |
961 | recommended) | |
962 | * fixed TLS library deinitialization after RSN pre-authentication not | |
963 | to disable TLS library for normal authentication | |
964 | * driver_wext: Remove null-termination from SSID length if the driver | |
965 | used it; some Linux drivers do this and they were causing problems in | |
966 | wpa_supplicant not finding matching configuration block. This change | |
967 | would break a case where the SSID actually ends in '\0', but that is | |
968 | not likely to happen in real use. | |
969 | * fixed PMKSA cache processing not to trigger deauthentication if the | |
970 | current PMKSA cache entry is replaced with a valid new entry | |
971 | * fixed PC/SC initialization for ap_scan != 1 modes (this fixes | |
972 | EAP-SIM and EAP-AKA with real SIM/USIM card when using ap_scan=0 or | |
973 | ap_scan=2) | |
974 | ||
975 | 2005-12-18 - v0.5.0 (beginning of 0.5.x development releases) | |
976 | * added experimental STAKey handshake implementation for IEEE 802.11e | |
977 | direct link setup (DLS); note: this is disabled by default in both | |
978 | build and runtime configuration (can be enabled with CONFIG_STAKEY=y | |
979 | and stakey=1) | |
980 | * fixed EAP-SIM and EAP-AKA pseudonym and fast re-authentication to | |
981 | decrypt AT_ENCR_DATA attributes correctly | |
982 | * fixed EAP-AKA to allow resynchronization within the same session | |
983 | * made code closer to ANSI C89 standard to make it easier to port to | |
984 | other C libraries and compilers | |
985 | * started moving operating system or C library specific functions into | |
986 | wrapper functions defined in os.h and implemented in os_*.c to make | |
987 | code more portable | |
988 | * wpa_supplicant can now be built with Microsoft Visual C++ | |
989 | (e.g., with the freely available Toolkit 2003 version or Visual | |
990 | C++ 2005 Express Edition and Platform SDK); see nmake.mak for an | |
991 | example makefile for nmake | |
992 | * added support for using Windows registry for command line parameters | |
993 | (CONFIG_MAIN=main_winsvc) and configuration data | |
994 | (CONFIG_BACKEND=winreg); see win_example.reg for an example registry | |
995 | contents; this version can be run both as a Windows service and as a | |
996 | normal application; 'wpasvc.exe app' to start as applicant, | |
997 | 'wpasvc.exe reg <full path to wpasvc.exe>' to register a service, | |
998 | 'net start wpasvc' to start the service, 'wpasvc.exe unreg' to | |
999 | unregister a service | |
1000 | * made it possible to link ndis_events.exe functionality into | |
1001 | wpa_supplicant.exe by defining CONFIG_NDIS_EVENTS_INTEGRATED | |
1002 | * added better support for multiple control interface backends | |
1003 | (CONFIG_CTRL_IFACE option); currently, 'unix' and 'udp' are supported | |
1004 | * fixed PC/SC code to use correct length for GSM AUTH command buffer | |
1005 | and to not use pioRecvPci with SCardTransmit() calls; these were not | |
1006 | causing visible problems with pcsc-lite, but Windows Winscard.dll | |
1007 | refused the previously used parameters; this fixes EAP-SIM and | |
1008 | EAP-AKA authentication using SIM/USIM card under Windows | |
1009 | * added new event loop implementation for Windows using | |
1010 | WaitForMultipleObject() instead of select() in order to allow waiting | |
1011 | for non-socket objects; this can be selected with | |
1012 | CONFIG_ELOOP=eloop_win in .config | |
1013 | * added support for selecting l2_packet implementation in .config | |
1014 | (CONFIG_L2_PACKET; following options are available now: linux, pcap, | |
1015 | winpcap, freebsd, none) | |
1016 | * added new l2_packet implementation for WinPcap | |
1017 | (CONFIG_L2_PACKET=winpcap) that uses a separate receive thread to | |
1018 | reduce latency in EAPOL receive processing from about 100 ms to about | |
1019 | 3 ms | |
1020 | * added support for EAP-FAST key derivation using other ciphers than | |
1021 | RC4-128-SHA for authentication and AES128-SHA for provisioning | |
1022 | * added support for configuring CA certificate as DER file and as a | |
1023 | configuration blob | |
1024 | * fixed private key configuration as configuration blob and added | |
1025 | support for using PKCS#12 as a blob | |
1026 | * tls_gnutls: added support for using PKCS#12 files; added support for | |
1027 | session resumption | |
1028 | * added support for loading trusted CA certificates from Windows | |
1029 | certificate store: ca_cert="cert_store://<name>", where <name> is | |
1030 | likely CA (Intermediate CA certificates) or ROOT (root certificates) | |
1031 | * added C version of ndis_events.cpp and made it possible to build this | |
1032 | with MinGW so that CONFIG_NDIS_EVENTS_INTEGRATED can be used more | |
1033 | easily on cross-compilation builds | |
1034 | * added wpasvc.exe into Windows binary release; this is an alternative | |
1035 | version of wpa_supplicant.exe with configuration backend using | |
1036 | Windows registry and with the entry point designed to run as a | |
1037 | Windows service | |
1038 | * integrated ndis_events.exe functionality into wpa_supplicant.exe and | |
1039 | wpasvc.exe and removed this additional tool from the Windows binary | |
1040 | release since it is not needed anymore | |
1041 | * load winscard.dll functions dynamically when building with MinGW | |
1042 | since MinGW does not yet include winscard library | |
1043 | ||
1044 | 2005-11-20 - v0.4.7 (beginning of 0.4.x stable releases) | |
1045 | * l2_packet_pcap: fixed wired IEEE 802.1X authentication with libpcap | |
1046 | and WinPcap to receive frames sent to PAE group address | |
1047 | * disable EAP state machine when IEEE 802.1X authentication is not used | |
1048 | in order to get rid of bogus "EAP failed" messages | |
1049 | * fixed OpenSSL error reporting to go through all pending errors to | |
1050 | avoid confusing reports of old errors being reported at later point | |
1051 | during handshake | |
1052 | * fixed configuration file updating to not write empty variables | |
1053 | (e.g., proto or key_mgmt) that the file parser would not accept | |
1054 | * fixed ADD_NETWORK ctrl_iface command to use the same default values | |
1055 | for variables as empty network definitions read from config file | |
1056 | would get | |
1057 | * fixed EAP state machine to not discard EAP-Failure messages in many | |
1058 | cases (e.g., during TLS handshake) | |
1059 | * fixed a infinite loop in private key reading if the configured file | |
1060 | cannot be parsed successfully | |
1061 | * driver_madwifi: added support for madwifi-ng | |
1062 | * wpa_gui: do not display password/PSK field contents | |
1063 | * wpa_gui: added CA certificate configuration | |
1064 | * driver_ndis: fixed scan request in ap_scan=2 mode not to change SSID | |
1065 | * driver_ndis: include Beacon IEs in AssocInfo in order to notice if | |
1066 | the new AP is using different WPA/RSN IE | |
1067 | * use longer timeout for IEEE 802.11 association to avoid problems with | |
1068 | drivers that may take more than five second to associate | |
1069 | ||
1070 | 2005-10-27 - v0.4.6 | |
1071 | * allow fallback to WPA, if mixed WPA+WPA2 networks have mismatch in | |
1072 | RSN IE, but WPA IE would match with wpa_supplicant configuration | |
1073 | * added support for named configuration blobs in order to avoid having | |
1074 | to use file system for external files (e.g., certificates); | |
1075 | variables can be set to "blob://<blob name>" instead of file path to | |
1076 | use a named blob; supported fields: pac_file, client_cert, | |
1077 | private_key | |
1078 | * fixed RSN pre-authentication (it was broken in the clean up of WPA | |
1079 | state machine interface in v0.4.5) | |
1080 | * driver_madwifi: set IEEE80211_KEY_GROUP flag for group keys to make | |
1081 | sure the driver configures broadcast decryption correctly | |
1082 | * added ca_path (and ca_path2) configuration variables that can be used | |
1083 | to configure OpenSSL CA path, e.g., /etc/ssl/certs, for using the | |
1084 | system-wide trusted CA list | |
1085 | * added support for starting wpa_supplicant without a configuration | |
1086 | file (-C argument must be used to set ctrl_interface parameter for | |
1087 | this case; in addition, -p argument can be used to provide | |
1088 | driver_param; these new arguments can also be used with a | |
1089 | configuration to override the values from the configuration) | |
1090 | * added global control interface that can be optionally used for adding | |
1091 | and removing network interfaces dynamically (-g command line argument | |
1092 | for both wpa_supplicant and wpa_cli) without having to restart | |
1093 | wpa_supplicant process | |
1094 | * wpa_gui: | |
1095 | - try to save configuration whenever something is modified | |
1096 | - added WEP key configuration | |
1097 | - added possibility to edit the current network configuration | |
1098 | * driver_ndis: fixed driver polling not to increase frequency on each | |
1099 | received EAPOL frame due to incorrectly cancelled timeout | |
1100 | * added simple configuration file examples (in examples subdirectory) | |
1101 | * fixed driver_wext.c to filter wireless events based on ifindex to | |
1102 | avoid interfaces receiving events from other interfaces | |
1103 | * delay sending initial EAPOL-Start couple of seconds to speed up | |
1104 | authentication for the most common case of Authenticator starting | |
1105 | EAP authentication immediately after association | |
1106 | ||
1107 | 2005-09-25 - v0.4.5 | |
1108 | * added a workaround for clearing keys with ndiswrapper to allow | |
1109 | roaming from WPA enabled AP to plaintext one | |
1110 | * added docbook documentation (doc/docbook) that can be used to | |
1111 | generate, e.g., man pages | |
1112 | * l2_packet_linux: use socket type SOCK_DGRAM instead of SOCK_RAW for | |
1113 | PF_PACKET in order to prepare for network devices that do not use | |
1114 | Ethernet headers (e.g., network stack with native IEEE 802.11 frames) | |
1115 | * use receipt of EAPOL-Key frame as a lower layer success indication | |
1116 | for EAP state machine to allow recovery from dropped EAP-Success | |
1117 | frame | |
1118 | * cleaned up internal EAPOL frame processing by not including link | |
1119 | layer (Ethernet) header during WPA and EAPOL/EAP processing; this | |
1120 | header is added only when transmitted the frame; this makes it easier | |
1121 | to use wpa_supplicant on link layers that use different header than | |
1122 | Ethernet | |
1123 | * updated EAP-PSK to use draft 9 by default since this can now be | |
1124 | tested with hostapd; removed support for draft 3, including | |
1125 | server_nai configuration option from network blocks | |
1126 | * driver_wired: add PAE address to the multicast address list in order | |
1127 | to be able to receive EAPOL frames with drivers that do not include | |
1128 | these multicast addresses by default | |
1129 | * driver_wext: add support for WE-19 | |
1130 | * added support for multiple configuration backends (CONFIG_BACKEND | |
1131 | option); currently, only 'file' is supported (i.e., the format used | |
1132 | in wpa_supplicant.conf) | |
1133 | * added support for updating configuration ('wpa_cli save_config'); | |
1134 | this is disabled by default and can be enabled with global | |
1135 | update_config=1 variable in wpa_supplicant.conf; this allows wpa_cli | |
1136 | and wpa_gui to store the configuration changes in a permanent store | |
1137 | * added GET_NETWORK ctrl_iface command | |
1138 | (e.g., 'wpa_cli get_network 0 ssid') | |
1139 | ||
1140 | 2005-08-21 - v0.4.4 | |
1141 | * replaced OpenSSL patch for EAP-FAST support | |
1142 | (openssl-tls-extensions.patch) with a more generic and correct | |
1143 | patch (the new patch is not compatible with the previous one, so the | |
1144 | OpenSSL library will need to be patched with the new patch in order | |
1145 | to be able to build wpa_supplicant with EAP-FAST support) | |
1146 | * added support for using Windows certificate store (through CryptoAPI) | |
1147 | for client certificate and private key operations (EAP-TLS) | |
1148 | (see wpa_supplicant.conf for more information on how to configure | |
1149 | this with private_key) | |
1150 | * ported wpa_gui to Windows | |
1151 | * added Qt4 version of wpa_gui (wpa_gui-qt4 directory); this can be | |
1152 | built with the open source version of the Qt4 for Windows | |
1153 | * allow non-WPA modes (e.g., IEEE 802.1X with dynamic WEP) to be used | |
1154 | with drivers that do not support WPA | |
1155 | * ndis_events: fixed Windows 2000 support | |
1156 | * added support for enabling/disabling networks from the list of all | |
1157 | configured networks ('wpa_cli enable_network <network id>' and | |
1158 | 'wpa_cli disable_network <network id>') | |
1159 | * added support for adding and removing network from the current | |
1160 | configuration ('wpa_cli add_network' and 'wpa_cli remove_network | |
1161 | <network id>'); added networks are disabled by default and they can | |
1162 | be enabled with enable_network command once the configuration is done | |
1163 | for the new network; note: configuration file is not yet updated, so | |
1164 | these new networks are lost when wpa_supplicant is restarted | |
1165 | * added support for setting network configuration parameters through | |
1166 | the control interface, for example: | |
1167 | wpa_cli set_network 0 ssid "\"my network\"" | |
1168 | * fixed parsing of strings that include both " and # within double | |
1169 | quoted area (e.g., "start"#end") | |
1170 | * added EAP workaround for PEAP session resumption: allow outer, | |
1171 | i.e., not tunneled, EAP-Success to terminate session since; this can | |
1172 | be disabled with eap_workaround=0 | |
1173 | (this was allowed for PEAPv1 before, but now it is also allowed for | |
1174 | PEAPv0 since at least one RADIUS authentication server seems to be | |
1175 | doing this for PEAPv0, too) | |
1176 | * wpa_gui: added preliminary support for adding new networks to the | |
1177 | wpa_supplicant configuration (double click on the scan results to | |
1178 | open network configuration) | |
1179 | ||
1180 | 2005-06-26 - v0.4.3 | |
1181 | * removed interface for external EAPOL/EAP supplicant (e.g., | |
1182 | Xsupplicant), (CONFIG_XSUPPLICANT_IFACE) since it is not required | |
1183 | anymore and is unlikely to be used by anyone | |
1184 | * driver_ndis: fixed WinPcap 3.0 support | |
1185 | * fixed build with CONFIG_DNET_PCAP=y on Linux | |
1186 | * l2_packet: moved different implementations into separate files | |
1187 | (l2_packet_*.c) | |
1188 | ||
1189 | 2005-06-12 - v0.4.2 | |
1190 | * driver_ipw: updated driver structures to match with ipw2200-1.0.4 | |
1191 | (note: ipw2100-1.1.0 is likely to require an update to work with | |
1192 | this) | |
1193 | * added support for using ap_scan=2 mode with multiple network blocks; | |
1194 | wpa_supplicant will go through the networks one by one until the | |
1195 | driver reports a successful association; this uses the same order for | |
1196 | networks as scan_ssid=1 scans, i.e., the priority field is ignored | |
1197 | and the network block order in the file is used instead | |
1198 | * fixed a potential issue in RSN pre-authentication ending up using | |
1199 | freed memory if pre-authentication times out | |
1200 | * added support for matching alternative subject name extensions of the | |
1201 | authentication server certificate; new configuration variables | |
1202 | altsubject_match and altsubject_match2 | |
1203 | * driver_ndis: added support for IEEE 802.1X authentication with wired | |
1204 | NDIS drivers | |
1205 | * added support for querying private key password (EAP-TLS) through the | |
1206 | control interface (wpa_cli/wpa_gui) if one is not included in the | |
1207 | configuration file | |
1208 | * driver_broadcom: fixed couple of memory leaks in scan result | |
1209 | processing | |
1210 | * EAP-PAX is now registered as EAP type 46 | |
1211 | * fixed EAP-PAX MAC calculation | |
1212 | * fixed EAP-PAX CK and ICK key derivation | |
1213 | * added support for using password with EAP-PAX (as an alternative to | |
1214 | entering key with eappsk); SHA-1 hash of the password will be used as | |
1215 | the key in this case | |
1216 | * added support for arbitrary driver interface parameters through the | |
1217 | configuration file with a new driver_param field; this adds a new | |
1218 | driver_ops function set_param() | |
1219 | * added possibility to override l2_packet module with driver interface | |
1220 | API (new send_eapol handler); this can be used to implement driver | |
1221 | specific TX/RX functions for EAPOL frames | |
1222 | * fixed ctrl_interface_group processing for the case where gid is | |
1223 | entered as a number, not group name | |
1224 | * driver_test: added support for testing hostapd with wpa_supplicant | |
1225 | by using test driver interface without any kernel drivers or network | |
1226 | cards | |
1227 | ||
1228 | 2005-05-22 - v0.4.1 | |
1229 | * driver_madwifi: fixed WPA/WPA2 mode configuration to allow EAPOL | |
1230 | packets to be encrypted; this was apparently broken by the changed | |
1231 | ioctl order in v0.4.0 | |
1232 | * driver_madwifi: added preliminary support for compiling against 'BSD' | |
1233 | branch of madwifi CVS tree | |
1234 | * added support for EAP-MSCHAPv2 password retries within the same EAP | |
1235 | authentication session | |
1236 | * added support for password changes with EAP-MSCHAPv2 (used when the | |
1237 | password has expired) | |
1238 | * added support for reading additional certificates from PKCS#12 files | |
1239 | and adding them to the certificate chain | |
1240 | * fixed association with IEEE 802.1X (no WPA) when dynamic WEP keys | |
1241 | were used | |
1242 | * fixed a possible double free in EAP-TTLS fast-reauthentication when | |
1243 | identity or password is entered through control interface | |
1244 | * display EAP Notification messages to user through control interface | |
1245 | with "CTRL-EVENT-EAP-NOTIFICATION" prefix | |
1246 | * added GUI version of wpa_cli, wpa_gui; this is not build | |
1247 | automatically with 'make'; use 'make wpa_gui' to build (this requires | |
1248 | Qt development tools) | |
1249 | * added 'disconnect' command to control interface for setting | |
1250 | wpa_supplicant in state where it will not associate before | |
1251 | 'reassociate' command has been used | |
1252 | * added support for selecting a network from the list of all configured | |
1253 | networks ('wpa_cli select_network <network id>'; this disabled all | |
1254 | other networks; to re-enable, 'wpa_cli select_network any') | |
1255 | * added support for getting scan results through control interface | |
1256 | * added EAP workaround for PEAPv1 session resumption: allow outer, | |
1257 | i.e., not tunneled, EAP-Success to terminate session since; this can | |
1258 | be disabled with eap_workaround=0 | |
1259 | ||
1260 | 2005-04-25 - v0.4.0 (beginning of 0.4.x development releases) | |
1261 | * added a new build time option, CONFIG_NO_STDOUT_DEBUG, that can be | |
1262 | used to reduce the size of the wpa_supplicant considerably if | |
1263 | debugging code is not needed | |
1264 | * fixed EAPOL-Key validation to drop packets with invalid Key Data | |
1265 | Length; such frames could have crashed wpa_supplicant due to buffer | |
1266 | overflow | |
1267 | * added support for wired authentication (IEEE 802.1X on wired | |
1268 | Ethernet); driver interface 'wired' | |
1269 | * obsoleted set_wpa() handler in the driver interface API (it can be | |
1270 | replaced by moving enable/disable functionality into init()/deinit()) | |
1271 | (calls to set_wpa() are still present for backwards compatibility, | |
1272 | but they may be removed in the future) | |
1273 | * driver_madwifi: fixed association in plaintext mode | |
1274 | * modified the EAP workaround that accepts EAP-Success with incorrect | |
1275 | Identifier to be even less strict about verification in order to | |
1276 | interoperate with some authentication servers | |
1277 | * added support for sending TLS alerts | |
1278 | * added support for 'any' SSID wildcard; if ssid is not configured or | |
1279 | is set to an empty string, any SSID will be accepted for non-WPA AP | |
1280 | * added support for asking PIN (for SIM) from frontends (e.g., | |
1281 | wpa_cli); if a PIN is needed, but not included in the configuration | |
1282 | file, a control interface request is sent and EAP processing is | |
1283 | delayed until the PIN is available | |
1284 | * added support for using external devices (e.g., a smartcard) for | |
1285 | private key operations in EAP-TLS (CONFIG_SMARTCARD=y in .config); | |
1286 | new wpa_supplicant.conf variables: | |
1287 | - global: opensc_engine_path, pkcs11_engine_path, pkcs11_module_path | |
1288 | - network: engine, engine_id, key_id | |
1289 | * added experimental support for EAP-PAX | |
1290 | * added monitor mode for wpa_cli (-a<path to a program to run>) that | |
1291 | allows external commands (e.g., shell scripts) to be run based on | |
1292 | wpa_supplicant events, e.g., when authentication has been completed | |
1293 | and data connection is ready; other related wpa_cli arguments: | |
1294 | -B (run in background), -P (write PID file); wpa_supplicant has a new | |
1295 | command line argument (-W) that can be used to make it wait until a | |
1296 | control interface command is received in order to avoid missing | |
1297 | events | |
1298 | * added support for opportunistic WPA2 PMKSA key caching (disabled by | |
1299 | default, can be enabled with proactive_key_caching=1) | |
1300 | * fixed RSN IE in 4-Way Handshake message 2/4 for the case where | |
1301 | Authenticator rejects PMKSA caching attempt and the driver is not | |
1302 | using assoc_info events | |
1303 | * added -P<pid file> argument for wpa_supplicant to write the current | |
1304 | process id into a file | |
1305 | ||
1306 | 2005-02-12 - v0.3.7 (beginning of 0.3.x stable releases) | |
1307 | * added new phase1 option parameter, include_tls_length=1, to force | |
1308 | wpa_supplicant to add TLS Message Length field to all TLS messages | |
1309 | even if the packet is not fragmented; this may be needed with some | |
1310 | authentication servers | |
1311 | * fixed WPA/RSN IE verification in message 3 of 4-Way Handshake when | |
1312 | using drivers that take care of AP selection (e.g., when using | |
1313 | ap_scan=2) | |
1314 | * fixed reprocessing of pending request after ctrl_iface requests for | |
1315 | identity/password/otp | |
1316 | * fixed ctrl_iface requests for identity/password/otp in Phase 2 of | |
1317 | EAP-PEAP and EAP-TTLS | |
1318 | * all drivers using driver_wext: set interface up and select Managed | |
1319 | mode when starting wpa_supplicant; set interface down when exiting | |
1320 | * renamed driver_ipw2100.c to driver_ipw.c since it now supports both | |
1321 | ipw2100 and ipw2200; please note that this also changed the | |
1322 | configuration variable in .config to CONFIG_DRIVER_IPW | |
1323 | ||
1324 | 2005-01-24 - v0.3.6 | |
1325 | * fixed a busy loop introduced in v0.3.5 for scan result processing | |
1326 | when no matching AP is found | |
1327 | ||
1328 | 2005-01-23 - v0.3.5 | |
1329 | * added a workaround for an interoperability issue with a Cisco AP | |
1330 | when using WPA2-PSK | |
1331 | * fixed non-WPA IEEE 802.1X to use the same authentication timeout as | |
1332 | WPA with IEEE 802.1X (i.e., timeout 10 -> 70 sec to allow | |
1333 | retransmission of dropped frames) | |
1334 | * fixed issues with 64-bit CPUs and SHA1 cleanup in previous version | |
1335 | (e.g., segfault when processing EAPOL-Key frames) | |
1336 | * fixed EAP workaround and fast reauthentication configuration for | |
1337 | RSN pre-authentication; previously these were disabled and | |
1338 | pre-authentication would fail if the used authentication server | |
1339 | requires EAP workarounds | |
1340 | * added support for blacklisting APs that fail or timeout | |
1341 | authentication in ap_scan=1 mode so that all APs are tried in cases | |
1342 | where the ones with strongest signal level are failing authentication | |
1343 | * fixed CA certificate loading after a failed EAP-TLS/PEAP/TTLS | |
1344 | authentication attempt | |
1345 | * allow EAP-PEAP/TTLS fast reauthentication only if Phase 2 succeeded | |
1346 | in the previous authentication (previously, only Phase 1 success was | |
1347 | verified) | |
1348 | ||
1349 | 2005-01-09 - v0.3.4 | |
1350 | * added preliminary support for IBSS (ad-hoc) mode configuration | |
1351 | (mode=1 in network block); this included a new key_mgmt mode | |
1352 | WPA-NONE, i.e., TKIP or CCMP with a fixed key (based on psk) and no | |
1353 | key management; see wpa_supplicant.conf for more details and an | |
1354 | example on how to configure this (note: this is currently implemented | |
1355 | only for driver_hostapd.c, but the changes should be trivial to add | |
1356 | in associate() handler for other drivers, too (assuming the driver | |
1357 | supports WPA-None) | |
1358 | * added preliminary port for native Windows (i.e., no cygwin) using | |
1359 | mingw | |
1360 | ||
1361 | 2005-01-02 - v0.3.3 | |
1362 | * added optional support for GNU Readline and History Libraries for | |
1363 | wpa_cli (CONFIG_READLINE) | |
1364 | * cleaned up EAP state machine <-> method interface and number of | |
1365 | small problems with error case processing not terminating on | |
1366 | EAP-Failure but waiting for timeout | |
1367 | * added couple of workarounds for interoperability issues with a | |
1368 | Cisco AP when using WPA2 | |
1369 | * added support for EAP-FAST (draft-cam-winget-eap-fast-00.txt); | |
1370 | Note: This requires a patch for openssl to add support for TLS | |
1371 | extensions and number of workarounds for operations without | |
1372 | certificates. Proof of concept type of experimental patch is | |
1373 | included in openssl-tls-extensions.patch. | |
1374 | ||
1375 | 2004-12-19 - v0.3.2 | |
1376 | * fixed private key loading for cases where passphrase is not set | |
1377 | * fixed Windows/cygwin L2 packet handler freeing; previous version | |
1378 | could cause a segfault when RSN pre-authentication was completed | |
1379 | * added support for PMKSA caching with drivers that generate RSN IEs | |
1380 | (e.g., NDIS); currently, this is only implemented in driver_ndis.c, | |
1381 | but similar code can be easily added to driver_ndiswrapper.c once | |
1382 | ndiswrapper gets full support for RSN PMKSA caching | |
1383 | * improved recovery from PMKID mismatches by requesting full EAP | |
1384 | authentication in case of failed PMKSA caching attempt | |
1385 | * driver_ndis: added support for NDIS NdisMIncidateStatus() events | |
1386 | (this requires that ndis_events is ran while wpa_supplicant is | |
1387 | running) | |
1388 | * driver_ndis: use ADD_WEP/REMOVE_WEP when configuring WEP keys | |
1389 | * added support for driver interfaces to replace the interface name | |
1390 | based on driver/OS specific mapping, e.g., in case of driver_ndis, | |
1391 | this allows the beginning of the adapter description to be used as | |
1392 | the interface name | |
1393 | * added support for CR+LF (Windows-style) line ends in configuration | |
1394 | file | |
1395 | * driver_ndis: enable radio before starting scanning, disable radio | |
1396 | when exiting | |
1397 | * modified association event handler to set portEnabled = FALSE before | |
1398 | clearing port Valid in order to reset EAP state machine and avoid | |
1399 | problems with new authentication getting ignored because of state | |
1400 | machines ending up in AUTHENTICATED/SUCCESS state based on old | |
1401 | information | |
1402 | * added support for driver events to add PMKID candidates in order to | |
1403 | allow drivers to give priority to most likely roaming candidates | |
1404 | * driver_hostap: moved PrivacyInvoked configuration to associate() | |
1405 | function so that this will not be set for plaintext connections | |
1406 | * added KEY_MGMT_802_1X_NO_WPA as a new key_mgmt type so that driver | |
1407 | interface can distinguish plaintext and IEEE 802.1X (no WPA) | |
1408 | authentication | |
1409 | * fixed static WEP key configuration to use broadcast/default type for | |
1410 | all keys (previously, the default TX key was configured as pairwise/ | |
1411 | unicast key) | |
1412 | * driver_ndis: added legacy WPA capability detection for non-WPA2 | |
1413 | drivers | |
1414 | * added support for setting static WEP keys for IEEE 802.1X without | |
1415 | dynamic WEP keying (eapol_flags=0) | |
1416 | ||
1417 | 2004-12-12 - v0.3.1 | |
1418 | * added support for reading PKCS#12 (PFX) files (as a replacement for | |
1419 | PEM/DER) to get certificate and private key (CONFIG_PKCS12) | |
1420 | * fixed compilation with CONFIG_PCSC=y | |
1421 | * added new ap_scan mode, ap_scan=2, for drivers that take care of | |
1422 | association, but need to be configured with security policy and SSID, | |
1423 | e.g., ndiswrapper and NDIS driver; this mode should allow such | |
1424 | drivers to work with hidden SSIDs and optimized roaming; when | |
1425 | ap_scan=2 is used, only the first network block in the configuration | |
1426 | file is used and this configuration should have explicit security | |
1427 | policy (i.e., only one option in the lists) for key_mgmt, pairwise, | |
1428 | group, proto variables | |
1429 | * added experimental port of wpa_supplicant for Windows | |
1430 | - driver_ndis.c driver interface (NDIS OIDs) | |
1431 | - currently, this requires cygwin and WinPcap | |
1432 | - small utility, win_if_list, can be used to get interface name | |
1433 | * control interface can now be removed at build time; add | |
1434 | CONFIG_CTRL_IFACE=y to .config to maintain old functionality | |
1435 | * optional Xsupplicant interface can now be removed at build time; | |
1436 | (CONFIG_XSUPPLICANT_IFACE=y in .config to bring it back) | |
1437 | * added auth_alg to driver interface associate() parameters to make it | |
1438 | easier for drivers to configure authentication algorithm as part of | |
1439 | the association | |
1440 | ||
1441 | 2004-12-05 - v0.3.0 (beginning of 0.3.x development releases) | |
1442 | * driver_broadcom: added new driver interface for Broadcom wl.o driver | |
1443 | (a generic driver for Broadcom IEEE 802.11a/g cards) | |
1444 | * wpa_cli: fixed parsing of -p <path> command line argument | |
1445 | * PEAPv1: fixed tunneled EAP-Success reply handling to reply with TLS | |
1446 | ACK, not tunneled EAP-Success (of which only the first byte was | |
1447 | actually send due to a bug in previous code); this seems to | |
1448 | interoperate with most RADIUS servers that implements PEAPv1 | |
1449 | * PEAPv1: added support for terminating PEAP authentication on tunneled | |
1450 | EAP-Success message; this can be configured by adding | |
1451 | peap_outer_success=0 on phase1 parameters in wpa_supplicant.conf | |
1452 | (some RADIUS servers require this whereas others require a tunneled | |
1453 | reply | |
1454 | * PEAPv1: changed phase1 option peaplabel to use default to 0, i.e., to | |
1455 | the old label for key derivation; previously, the default was 1, | |
1456 | but it looks like most existing PEAPv1 implementations use the old | |
1457 | label which is thus more suitable default option | |
1458 | * added support for EAP-PSK (draft-bersani-eap-psk-03.txt) | |
1459 | * fixed parsing of wep_tx_keyidx | |
1460 | * added support for configuring list of allowed Phase 2 EAP types | |
1461 | (for both EAP-PEAP and EAP-TTLS) instead of only one type | |
1462 | * added support for configuring IEEE 802.11 authentication algorithm | |
1463 | (auth_alg; mainly for using Shared Key authentication with static | |
1464 | WEP keys) | |
1465 | * added support for EAP-AKA (with UMTS SIM) | |
1466 | * fixed couple of errors in PCSC handling that could have caused | |
1467 | random-looking errors for EAP-SIM | |
1468 | * added support for EAP-SIM pseudonyms and fast re-authentication | |
1469 | * added support for EAP-TLS/PEAP/TTLS fast re-authentication (TLS | |
1470 | session resumption) | |
1471 | * added support for EAP-SIM with two challanges | |
1472 | (phase1="sim_min_num_chal=3" can be used to require three challenges) | |
1473 | * added support for configuring DH/DSA parameters for an ephemeral DH | |
1474 | key exchange (EAP-TLS/PEAP/TTLS) using new configuration parameters | |
1475 | dh_file and dh_file2 (phase 2); this adds support for using DSA keys | |
1476 | and optional DH key exchange to achieve forward secracy with RSA keys | |
1477 | * added support for matching subject of the authentication server | |
1478 | certificate with a substring when using EAP-TLS/PEAP/TTLS; new | |
1479 | configuration variables subject_match and subject_match2 | |
1480 | * changed SSID configuration in driver_wext.c (used by many driver | |
1481 | interfaces) to use ssid_len+1 as the length for SSID since some Linux | |
1482 | drivers expect this | |
1483 | * fixed couple of unaligned reads in scan result parsing to fix WPA | |
1484 | connection on some platforms (e.g., ARM) | |
1485 | * added driver interface for Intel ipw2100 driver | |
1486 | * added support for LEAP with WPA | |
1487 | * added support for larger scan results report (old limit was 4 kB of | |
1488 | data, i.e., about 35 or so APs) when using Linux wireless extensions | |
1489 | v17 or newer | |
1490 | * fixed a bug in PMKSA cache processing: skip sending of EAPOL-Start | |
1491 | only if there is a PMKSA cache entry for the current AP | |
1492 | * fixed error handling for case where reading of scan results fails: | |
1493 | must schedule a new scan or wpa_supplicant will remain waiting | |
1494 | forever | |
1495 | * changed debug output to remove shared password/key material by | |
1496 | default; all key information can be included with -K command line | |
1497 | argument to match the previous behavior | |
1498 | * added support for timestamping debug log messages (disabled by | |
1499 | default, can be enabled with -t command line argument) | |
1500 | * set pairwise/group cipher suite for non-WPA IEEE 802.1X to WEP-104 | |
1501 | if keys are not configured to be used; this fixes IEEE 802.1X mode | |
1502 | with drivers that use this information to configure whether Privacy | |
1503 | bit can be in Beacon frames (e.g., ndiswrapper) | |
1504 | * avoid clearing driver keys if no keys have been configured since last | |
1505 | key clear request; this seems to improve reliability of group key | |
1506 | handshake for ndiswrapper & NDIS driver which seems to be suffering | |
1507 | of some kind of timing issue when the keys are cleared again after | |
1508 | association | |
1509 | * changed driver interface API: | |
1510 | - WPA_SUPPLICANT_DRIVER_VERSION define can be used to determine which | |
1511 | version is being used (now, this is set to 2; previously, it was | |
1512 | not defined) | |
1513 | - pass pointer to private data structure to all calls | |
1514 | - the new API is not backwards compatible; all in-tree driver | |
1515 | interfaces has been converted to the new API | |
1516 | * added support for controlling multiple interfaces (radios) per | |
1517 | wpa_supplicant process; each interface needs to be listed on the | |
1518 | command line (-c, -i, -D arguments) with -N as a separator | |
1519 | (-cwpa1.conf -iwlan0 -Dhostap -N -cwpa2.conf -iath0 -Dmadwifi) | |
1520 | * added a workaround for EAP servers that incorrectly use same Id for | |
1521 | sequential EAP packets | |
1522 | * changed libpcap/libdnet configuration to use .config variable, | |
1523 | CONFIG_DNET_PCAP, instead of requiring Makefile modification | |
1524 | * improved downgrade attack detection in IE verification of msg 3/4: | |
1525 | verify both WPA and RSN IEs, if present, not only the selected one; | |
1526 | reject the AP if an RSN IE is found in msg 3/4, but not in Beacon or | |
1527 | Probe Response frame, and RSN is enabled in wpa_supplicant | |
1528 | configuration | |
1529 | * fixed WPA msg 3/4 processing to allow Key Data field contain other | |
1530 | IEs than just one WPA IE | |
1531 | * added support for FreeBSD and driver interface for the BSD net80211 | |
1532 | layer (CONFIG_DRIVER_BSD=y in .config); please note that some of the | |
1533 | required kernel mods have not yet been committed | |
1534 | * made EAP workarounds configurable; enabled by default, can be | |
1535 | disabled with network block option eap_workaround=0 | |
1536 | ||
1537 | 2004-07-17 - v0.2.4 (beginning of 0.2.x stable releases) | |
1538 | * resolved couple of interoperability issues with EAP-PEAPv1 and | |
1539 | Phase 2 (inner EAP) fragment reassembly | |
1540 | * driver_madwifi: fixed WEP key configuration for IEEE 802.1X when the | |
1541 | AP is using non-zero key index for the unicast key and key index zero | |
1542 | for the broadcast key | |
1543 | * driver_hostap: fixed IEEE 802.1X WEP key updates and | |
1544 | re-authentication by allowing unencrypted EAPOL frames when not using | |
1545 | WPA | |
1546 | * added a new driver interface, 'wext', which uses only standard, | |
1547 | driver independent functionality in Linux wireless extensions; | |
1548 | currently, this can be used only for non-WPA IEEE 802.1X mode, but | |
1549 | eventually, this is to be extended to support full WPA/WPA2 once | |
1550 | Linux wireless extensions get support for this | |
1551 | * added support for mode in which the driver is responsible for AP | |
1552 | scanning and selection; this is disabled by default and can be | |
1553 | enabled with global ap_scan=0 variable in wpa_supplicant.conf; | |
1554 | this mode can be used, e.g., with generic 'wext' driver interface to | |
1555 | use wpa_supplicant as IEEE 802.1X Supplicant with any Linux driver | |
1556 | supporting wireless extensions. | |
1557 | * driver_madwifi: fixed WPA2 configuration and scan_ssid=1 (e.g., | |
1558 | operation with an AP that does not include SSID in the Beacon frames) | |
1559 | * added support for new EAP authentication methods: | |
1560 | EAP-TTLS/EAP-OTP, EAP-PEAPv0/OTP, EAP-PEAPv1/OTP, EAP-OTP | |
1561 | * added support for asking one-time-passwords from frontends (e.g., | |
1562 | wpa_cli); this 'otp' command works otherwise like 'password' command, | |
1563 | but the password is used only once and the frontend will be asked for | |
1564 | a new password whenever a request from authenticator requires a | |
1565 | password; this can be used with both EAP-OTP and EAP-GTC | |
1566 | * changed wpa_cli to automatically re-establish connection so that it | |
1567 | does not need to be re-started when wpa_supplicant is terminated and | |
1568 | started again | |
1569 | * improved user data (identity/password/otp) requests through | |
1570 | frontends: process pending EAPOL packets after getting new | |
1571 | information so that full authentication does not need to be | |
1572 | restarted; in addition, send pending requests again whenever a new | |
1573 | frontend is attached | |
1574 | * changed control frontends to use a new directory for socket files to | |
1575 | make it easier for wpa_cli to automatically select between interfaces | |
1576 | and to provide access control for the control interface; | |
1577 | wpa_supplicant.conf: ctrl_interface is now a path | |
1578 | (/var/run/wpa_supplicant is the recommended path) and | |
1579 | ctrl_interface_group can be used to select which group gets access to | |
1580 | the control interface; | |
1581 | wpa_cli: by default, try to connect to the first interface available | |
1582 | in /var/run/wpa_supplicant; this path can be overriden with -p option | |
1583 | and an interface can be selected with -i option (i.e., in most common | |
1584 | cases, wpa_cli does not need to get any arguments) | |
1585 | * added support for LEAP | |
1586 | * added driver interface for Linux ndiswrapper | |
1587 | * added priority option for network blocks in the configuration file; | |
1588 | this allows networks to be grouped based on priority (the scan | |
1589 | results are searched for matches with network blocks in this order) | |
1590 | ||
1591 | 2004-06-20 - v0.2.3 | |
1592 | * sort scan results to improve AP selection | |
1593 | * fixed control interface socket removal for some error cases | |
1594 | * improved scan requesting and authentication timeout | |
1595 | * small improvements/bug fixes for EAP-MSCHAPv2, EAP-PEAP, and | |
1596 | TLS processing | |
1597 | * PEAP version can now be forced with phase1="peapver=<ver>" | |
1598 | (mostly for testing; by default, the highest version supported by | |
1599 | both the Supplicant and Authentication Server is selected | |
1600 | automatically) | |
1601 | * added support for madwifi driver (Atheros ar521x) | |
1602 | * added a workaround for cases where AP sets Install Tx/Rx bit for | |
1603 | WPA Group Key messages when pairwise keys are used (without this, | |
1604 | the Group Key would be used for Tx and the AP would drop frames | |
1605 | from the station) | |
1606 | * added GSM SIM/USIM interface for GSM authentication algorithm for | |
1607 | EAP-SIM; this requires pcsc-lite | |
1608 | * added support for ATMEL AT76C5XXx driver | |
1609 | * fixed IEEE 802.1X WEP key derivation in the case where Authenticator | |
1610 | does not include key data in the EAPOL-Key frame (i.e., part of | |
1611 | EAP keying material is used as data encryption key) | |
1612 | * added support for using plaintext and static WEP networks | |
1613 | (key_mgmt=NONE) | |
1614 | ||
1615 | 2004-05-31 - v0.2.2 | |
1616 | * added support for new EAP authentication methods: | |
1617 | EAP-TTLS/EAP-MD5-Challenge | |
1618 | EAP-TTLS/EAP-GTC | |
1619 | EAP-TTLS/EAP-MSCHAPv2 | |
1620 | EAP-TTLS/EAP-TLS | |
1621 | EAP-TTLS/MSCHAPv2 | |
1622 | EAP-TTLS/MSCHAP | |
1623 | EAP-TTLS/PAP | |
1624 | EAP-TTLS/CHAP | |
1625 | EAP-PEAP/TLS | |
1626 | EAP-PEAP/GTC | |
1627 | EAP-PEAP/MD5-Challenge | |
1628 | EAP-GTC | |
1629 | EAP-SIM (not yet complete; needs GSM/SIM authentication interface) | |
1630 | * added support for anonymous identity (to be used when identity is | |
1631 | sent in plaintext; real identity will be used within TLS protected | |
1632 | tunnel (e.g., with EAP-TTLS) | |
1633 | * added event messages from wpa_supplicant to frontends, e.g., wpa_cli | |
1634 | * added support for requesting identity and password information using | |
1635 | control interface; in other words, the password for EAP-PEAP or | |
1636 | EAP-TTLS does not need to be included in the configuration file since | |
1637 | a frontand (e.g., wpa_cli) can ask it from the user | |
1638 | * improved RSN pre-authentication to use a candidate list and process | |
1639 | all candidates from each scan; not only one per scan | |
1640 | * fixed RSN IE and WPA IE capabilities field parsing | |
1641 | * ignore Tx bit in GTK IE when Pairwise keys are used | |
1642 | * avoid making new scan requests during IEEE 802.1X negotiation | |
1643 | * use openssl/libcrypto for MD5 and SHA-1 when compiling wpa_supplicant | |
1644 | with TLS support (this replaces the included implementation with | |
1645 | library code to save about 8 kB since the library code is needed | |
1646 | anyway for TLS) | |
1647 | * fixed WPA-PSK only mode when compiled without IEEE 802.1X support | |
1648 | (i.e., without CONFIG_IEEE8021X_EAPOL=y in .config) | |
1649 | ||
1650 | 2004-05-06 - v0.2.1 | |
1651 | * added support for internal IEEE 802.1X (actually, IEEE 802.1aa/D6.1) | |
1652 | Supplicant | |
1653 | - EAPOL state machines for Supplicant [IEEE 802.1aa/D6.1] | |
1654 | - EAP peer state machine [draft-ietf-eap-statemachine-02.pdf] | |
1655 | - EAP-MD5 (cannot be used with WPA-RADIUS) | |
1656 | [draft-ietf-eap-rfc2284bis-09.txt] | |
1657 | - EAP-TLS [RFC 2716] | |
1658 | - EAP-MSCHAPv2 (currently used only with EAP-PEAP) | |
1659 | - EAP-PEAP/MSCHAPv2 [draft-josefsson-pppext-eap-tls-eap-07.txt] | |
1660 | [draft-kamath-pppext-eap-mschapv2-00.txt] | |
1661 | (PEAP version 0, 1, and parts of 2; only 0 and 1 are enabled by | |
1662 | default; tested with FreeRADIUS, Microsoft IAS, and Funk Odyssey) | |
1663 | - new configuration file options: eap, identity, password, ca_cert, | |
1664 | client_cert, privatekey, private_key_passwd | |
1665 | - Xsupplicant is not required anymore, but it can be used by | |
1666 | disabling the internal IEEE 802.1X Supplicant with -e command line | |
1667 | option | |
1668 | - this code is not included in the default build; Makefile need to | |
1669 | be edited for this (uncomment lines for selected functionality) | |
1670 | - EAP-TLS and EAP-PEAP require openssl libraries | |
1671 | * use module prefix in debug messages (WPA, EAP, EAP-TLS, ..) | |
1672 | * added support for non-WPA IEEE 802.1X mode with dynamic WEP keys | |
1673 | (i.e., complete IEEE 802.1X/EAP authentication and use IEEE 802.1X | |
1674 | EAPOL-Key frames instead of WPA key handshakes) | |
1675 | * added support for IEEE 802.11i/RSN (WPA2) | |
1676 | - improved PTK Key Handshake | |
1677 | - PMKSA caching, pre-authentication | |
1678 | * fixed wpa_supplicant to ignore possible extra data after WPA | |
1679 | EAPOL-Key packets (this fixes 'Invalid EAPOL-Key MIC when using | |
1680 | TPTK' error from message 3 of 4-Way Handshake in case the AP | |
1681 | includes extra data after the EAPOL-Key) | |
1682 | * added interface for external programs (frontends) to control | |
1683 | wpa_supplicant | |
1684 | - CLI example (wpa_cli) with interactive mode and command line | |
1685 | mode | |
1686 | - replaced SIGUSR1 status/statistics with the new control interface | |
1687 | * made some feature compile time configurable | |
1688 | - .config file for make | |
1689 | - driver interfaces (hostap, hermes, ..) | |
1690 | - EAPOL/EAP functions | |
1691 | ||
1692 | 2004-02-15 - v0.2.0 | |
1693 | * Initial version of wpa_supplicant |