#define DEFAULT_DISABLE_HT40 0
#define DEFAULT_DISABLE_SGI 0
#define DEFAULT_DISABLE_LDPC 0
+#define DEFAULT_TX_STBC -1 /* no change */
+#define DEFAULT_RX_STBC -1 /* no change */
#define DEFAULT_DISABLE_MAX_AMSDU -1 /* no change */
#define DEFAULT_AMPDU_FACTOR -1 /* no change */
#define DEFAULT_AMPDU_DENSITY -1 /* no change */
#define DEFAULT_USER_SELECTED_SIM 1
+#define DEFAULT_MAX_OPER_CHWIDTH -1
struct psk_list_entry {
struct dl_list list;
u8 p2p;
};
+enum wpas_mode {
+ WPAS_MODE_INFRA = 0,
+ WPAS_MODE_IBSS = 1,
+ WPAS_MODE_AP = 2,
+ WPAS_MODE_P2P_GO = 3,
+ WPAS_MODE_P2P_GROUP_FORMATION = 4,
+ WPAS_MODE_MESH = 5,
+};
+
/**
* struct wpa_ssid - Network configuration data
*
*/
char *sae_password;
+ /**
+ * sae_password_id - SAE password identifier
+ *
+ * This parameter can be used to identify a specific SAE password. If
+ * not included, the default SAE password is used instead.
+ */
+ char *sae_password_id;
+
/**
* ext_psk - PSK/passphrase name in external storage
*
* CCMP, but not both), and psk must also be set (either directly or
* using ASCII passphrase).
*/
- enum wpas_mode {
- WPAS_MODE_INFRA = 0,
- WPAS_MODE_IBSS = 1,
- WPAS_MODE_AP = 2,
- WPAS_MODE_P2P_GO = 3,
- WPAS_MODE_P2P_GROUP_FORMATION = 4,
- WPAS_MODE_MESH = 5,
- } mode;
+ enum wpas_mode mode;
/**
* pbss - Whether to use PBSS. Relevant to DMG networks only.
*/
int disabled_for_connect;
- /**
- * peerkey - Whether PeerKey handshake for direct links is allowed
- *
- * This is only used when both RSN/WPA2 and IEEE 802.11e (QoS) are
- * enabled.
- *
- * 0 = disabled (default)
- * 1 = enabled
- */
- int peerkey;
-
/**
* id_str - Network identifier string for external scripts
*
enum mfp_options ieee80211w;
#endif /* CONFIG_IEEE80211W */
+#ifdef CONFIG_OCV
+ /**
+ * ocv - Enable/disable operating channel validation
+ *
+ * If this parameter is set to 1, stations will exchange OCI element
+ * to cryptographically verify the operating channel. Setting this
+ * parameter to 0 disables this option. Default value: 0.
+ */
+ int ocv;
+#endif /* CONFIG_OCV */
+
/**
* frequency - Channel frequency in megahertz (MHz) for IBSS
*
int vht;
- u8 max_oper_chwidth;
+ int he;
+
+ int max_oper_chwidth;
unsigned int vht_center_freq1;
unsigned int vht_center_freq2;
* By default (empty string): Use whatever the OS has configured.
*/
char *ht_mcs;
+
+ /**
+ * tx_stbc - Indicate STBC support for TX streams
+ *
+ * Value: -1..1, by default (-1): use whatever the OS or card has
+ * configured. See IEEE Std 802.11-2016, 9.4.2.56.2.
+ */
+ int tx_stbc;
+
+ /**
+ * rx_stbc - Indicate STBC support for RX streams
+ *
+ * Value: -1..3, by default (-1): use whatever the OS or card has
+ * configured. See IEEE Std 802.11-2016, 9.4.2.56.2.
+ */
+ int rx_stbc;
#endif /* CONFIG_HT_OVERRIDES */
#ifdef CONFIG_VHT_OVERRIDES
*/
int macsec_integ_only;
+ /**
+ * macsec_replay_protect - Enable MACsec replay protection
+ *
+ * This setting applies only when MACsec is in use, i.e.,
+ * - macsec_policy is enabled
+ * - the key server has decided to enable MACsec
+ *
+ * 0: Replay protection disabled (default)
+ * 1: Replay protection enabled
+ */
+ int macsec_replay_protect;
+
+ /**
+ * macsec_replay_window - MACsec replay protection window
+ *
+ * A window in which replay is tolerated, to allow receipt of frames
+ * that have been misordered by the network.
+ *
+ * This setting applies only when MACsec replay protection active, i.e.,
+ * - macsec_replay_protect is enabled
+ * - the key server has decided to enable MACsec
+ *
+ * 0: No replay window, strict check (default)
+ * 1..2^32-1: number of packets that could be misordered
+ */
+ u32 macsec_replay_window;
+
/**
* macsec_port - MACsec port (in SCI)
*
/**
* mka_ckn - MKA pre-shared CKN
*/
-#define MACSEC_CKN_LEN 32
- u8 mka_ckn[MACSEC_CKN_LEN];
+#define MACSEC_CKN_MAX_LEN 32
+ size_t mka_ckn_len;
+ u8 mka_ckn[MACSEC_CKN_MAX_LEN];
/**
* mka_cak - MKA pre-shared CAK
*/
-#define MACSEC_CAK_LEN 16
- u8 mka_cak[MACSEC_CAK_LEN];
+#define MACSEC_CAK_MAX_LEN 32
+ size_t mka_cak_len;
+ u8 mka_cak[MACSEC_CAK_MAX_LEN];
#define MKA_PSK_SET_CKN BIT(0)
#define MKA_PSK_SET_CAK BIT(1)
#ifdef CONFIG_HS20
int update_identifier;
+
+ /**
+ * roaming_consortium_selection - Roaming Consortium Selection
+ *
+ * The matching Roaming Consortium OI that was used to generate this
+ * network profile.
+ */
+ u8 *roaming_consortium_selection;
+
+ /**
+ * roaming_consortium_selection_len - roaming_consortium_selection len
+ */
+ size_t roaming_consortium_selection_len;
#endif /* CONFIG_HS20 */
unsigned int wps_run;
/**
* owe_group - OWE DH Group
*
- * 0 = use default (19)
+ * 0 = use default (19) first and then try all supported groups one by
+ * one if AP rejects the selected group
* 1-65535 DH Group to use for OWE
*
* Groups 19 (NIST P-256), 20 (NIST P-384), and 21 (NIST P-521) are
* currently supported.
*/
int owe_group;
+
+ /**
+ * owe_only - OWE-only mode (disable transition mode)
+ *
+ * 0 = enable transition mode (allow connection to either OWE or open
+ * BSS)
+ * 1 = disable transition mode (allow connection only with OWE)
+ */
+ int owe_only;
+
+ /**
+ * owe_transition_bss_select_count - OWE transition BSS select count
+ *
+ * This is an internally used variable (i.e., not used in external
+ * configuration) to track the number of selection attempts done for
+ * OWE BSS in transition mode. This allows fallback to an open BSS if
+ * the selection attempts for OWE BSS exceed the configured threshold.
+ */
+ int owe_transition_bss_select_count;
+
+ /**
+ * multi_ap_backhaul_sta - Multi-AP backhaul STA
+ * 0 = normal (non-Multi-AP) station
+ * 1 = Multi-AP backhaul station
+ */
+ int multi_ap_backhaul_sta;
+
+ /**
+ * ft_eap_pmksa_caching - Whether FT-EAP PMKSA caching is allowed
+ * 0 = do not try to use PMKSA caching with FT-EAP
+ * 1 = try to use PMKSA caching with FT-EAP
+ *
+ * This controls whether to try to use PMKSA caching with FT-EAP for the
+ * FT initial mobility domain association.
+ */
+ int ft_eap_pmksa_caching;
};
#endif /* CONFIG_SSID_H */
projects / thirdparty / hostap.git / blobdiff