# undefined via #undef or recursively expanded use the := operator
# instead of the = operator.
-PREDEFINED = IEEE8021X_EAPOL CONFIG_CTRL_IFACE
+PREDEFINED = IEEE8021X_EAPOL CONFIG_CTRL_IFACE CONFIG_P2P
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
# this tag can be used to specify a list of macro names that should be expanded.
/*
* BSS table
- * Copyright (c) 2009-2010, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2009-2012, Jouni Malinen <j@w1.fi>
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
}
+/**
+ * wpa_bss_anqp_alloc - Allocate ANQP data structure for a BSS entry
+ * Returns: Allocated ANQP data structure or %NULL on failure
+ *
+ * The allocated ANQP data structure has its users count set to 1. It may be
+ * shared by multiple BSS entries and each shared entry is freed with
+ * wpa_bss_anqp_free().
+ */
struct wpa_bss_anqp * wpa_bss_anqp_alloc(void)
{
struct wpa_bss_anqp *anqp;
}
+/**
+ * wpa_bss_anqp_clone - Clone an ANQP data structure
+ * @anqp: ANQP data structure from wpa_bss_anqp_alloc()
+ * Returns: Cloned ANQP data structure or %NULL on failure
+ */
static struct wpa_bss_anqp * wpa_bss_anqp_clone(struct wpa_bss_anqp *anqp)
{
struct wpa_bss_anqp *n;
}
+/**
+ * wpa_bss_anqp_unshare_alloc - Unshare ANQP data (if shared) in a BSS entry
+ * @bss: BSS entry
+ * Returns: 0 on success, -1 on failure
+ *
+ * This function ensures the specific BSS entry has an ANQP data structure that
+ * is not shared with any other BSS entry.
+ */
int wpa_bss_anqp_unshare_alloc(struct wpa_bss *bss)
{
struct wpa_bss_anqp *anqp;
}
+/**
+ * wpa_bss_anqp_free - Free an ANQP data structure
+ * @anqp: ANQP data structure from wpa_bss_anqp_alloc() or wpa_bss_anqp_clone()
+ */
static void wpa_bss_anqp_free(struct wpa_bss_anqp *anqp)
{
if (anqp == NULL)
}
+/**
+ * wpa_bss_get - Fetch a BSS table entry based on BSSID and SSID
+ * @wpa_s: Pointer to wpa_supplicant data
+ * @bssid: BSSID
+ * @ssid: SSID
+ * @ssid_len: Length of @ssid
+ * Returns: Pointer to the BSS entry or %NULL if not found
+ */
struct wpa_bss * wpa_bss_get(struct wpa_supplicant *wpa_s, const u8 *bssid,
const u8 *ssid, size_t ssid_len)
{
}
+/**
+ * wpa_bss_update_start - Start a BSS table update from scan results
+ * @wpa_s: Pointer to wpa_supplicant data
+ *
+ * This function is called at the start of each BSS table update round for new
+ * scan results. The actual scan result entries are indicated with calls to
+ * wpa_bss_update_scan_res() and the update round is finished with a call to
+ * wpa_bss_update_end().
+ */
void wpa_bss_update_start(struct wpa_supplicant *wpa_s)
{
wpa_s->bss_update_idx++;
}
+/**
+ * wpa_bss_update_scan_res - Update a BSS table entry based on a scan result
+ * @wpa_s: Pointer to wpa_supplicant data
+ * @res: Scan result
+ *
+ * This function updates a BSS table entry (or adds one) based on a scan result.
+ * This is called separately for each scan result between the calls to
+ * wpa_bss_update_start() and wpa_bss_update_end().
+ */
void wpa_bss_update_scan_res(struct wpa_supplicant *wpa_s,
struct wpa_scan_res *res)
{
}
+/**
+ * wpa_bss_update_end - End a BSS table update from scan results
+ * @wpa_s: Pointer to wpa_supplicant data
+ * @info: Information about scan parameters
+ * @new_scan: Whether this update round was based on a new scan
+ *
+ * This function is called at the end of each BSS table update round for new
+ * scan results. The start of the update was indicated with a call to
+ * wpa_bss_update_start().
+ */
void wpa_bss_update_end(struct wpa_supplicant *wpa_s, struct scan_info *info,
int new_scan)
{
}
+/**
+ * wpa_bss_flush_by_age - Flush old BSS entries
+ * @wpa_s: Pointer to wpa_supplicant data
+ * @age: Maximum entry age in seconds
+ *
+ * Remove BSS entries that have not been updated during the last @age seconds.
+ */
void wpa_bss_flush_by_age(struct wpa_supplicant *wpa_s, int age)
{
struct wpa_bss *bss, *n;
}
+/**
+ * wpa_bss_init - Initialize BSS table
+ * @wpa_s: Pointer to wpa_supplicant data
+ * Returns: 0 on success, -1 on failure
+ *
+ * This prepares BSS table lists and timer for periodic updates. The BSS table
+ * is deinitialized with wpa_bss_deinit() once not needed anymore.
+ */
int wpa_bss_init(struct wpa_supplicant *wpa_s)
{
dl_list_init(&wpa_s->bss);
}
+/**
+ * wpa_bss_flush - Flush all unused BSS entries
+ * @wpa_s: Pointer to wpa_supplicant data
+ */
void wpa_bss_flush(struct wpa_supplicant *wpa_s)
{
struct wpa_bss *bss, *n;
}
+/**
+ * wpa_bss_deinit - Deinitialize BSS table
+ * @wpa_s: Pointer to wpa_supplicant data
+ */
void wpa_bss_deinit(struct wpa_supplicant *wpa_s)
{
eloop_cancel_timeout(wpa_bss_timeout, wpa_s, NULL);
}
+/**
+ * wpa_bss_get_bssid - Fetch a BSS table entry based on BSSID
+ * @wpa_s: Pointer to wpa_supplicant data
+ * @bssid: BSSID
+ * Returns: Pointer to the BSS entry or %NULL if not found
+ */
struct wpa_bss * wpa_bss_get_bssid(struct wpa_supplicant *wpa_s,
const u8 *bssid)
{
#ifdef CONFIG_P2P
+/**
+ * wpa_bss_get_p2p_dev_addr - Fetch a BSS table entry based on P2P Device Addr
+ * @wpa_s: Pointer to wpa_supplicant data
+ * @dev_addr: P2P Device Address of the GO
+ * Returns: Pointer to the BSS entry or %NULL if not found
+ */
struct wpa_bss * wpa_bss_get_p2p_dev_addr(struct wpa_supplicant *wpa_s,
const u8 *dev_addr)
{
#endif /* CONFIG_P2P */
+/**
+ * wpa_bss_get_id - Fetch a BSS table entry based on identifier
+ * @wpa_s: Pointer to wpa_supplicant data
+ * @id: Unique identifier (struct wpa_bss::id) assigned for the entry
+ * Returns: Pointer to the BSS entry or %NULL if not found
+ */
struct wpa_bss * wpa_bss_get_id(struct wpa_supplicant *wpa_s, unsigned int id)
{
struct wpa_bss *bss;
}
+/**
+ * wpa_bss_get_ie - Fetch a specified information element from a BSS entry
+ * @bss: BSS table entry
+ * @ie: Information element identitifier (WLAN_EID_*)
+ * Returns: Pointer to the information element (id field) or %NULL if not found
+ *
+ * This function returns the first matching information element in the BSS
+ * entry.
+ */
const u8 * wpa_bss_get_ie(const struct wpa_bss *bss, u8 ie)
{
const u8 *end, *pos;
}
+/**
+ * wpa_bss_get_vendor_ie - Fetch a vendor information element from a BSS entry
+ * @bss: BSS table entry
+ * @vendor_type: Vendor type (four octets starting the IE payload)
+ * Returns: Pointer to the information element (id field) or %NULL if not found
+ *
+ * This function returns the first matching information element in the BSS
+ * entry.
+ */
const u8 * wpa_bss_get_vendor_ie(const struct wpa_bss *bss, u32 vendor_type)
{
const u8 *end, *pos;
}
+/**
+ * wpa_bss_get_vendor_ie_multi - Fetch vendor IE data from a BSS entry
+ * @bss: BSS table entry
+ * @vendor_type: Vendor type (four octets starting the IE payload)
+ * Returns: Pointer to the information element payload or %NULL if not found
+ *
+ * This function returns concatenated payload of possibly fragmented vendor
+ * specific information elements in the BSS entry. The caller is responsible for
+ * freeing the returned buffer.
+ */
struct wpabuf * wpa_bss_get_vendor_ie_multi(const struct wpa_bss *bss,
u32 vendor_type)
{
}
+/**
+ * wpa_bss_get_vendor_ie_multi_beacon - Fetch vendor IE data from a BSS entry
+ * @bss: BSS table entry
+ * @vendor_type: Vendor type (four octets starting the IE payload)
+ * Returns: Pointer to the information element payload or %NULL if not found
+ *
+ * This function returns concatenated payload of possibly fragmented vendor
+ * specific information elements in the BSS entry. The caller is responsible for
+ * freeing the returned buffer.
+ *
+ * This function is like wpa_bss_get_vendor_ie_multi(), but uses IE buffer only
+ * from Beacon frames instead of either Beacon or Probe Response frames.
+ */
struct wpabuf * wpa_bss_get_vendor_ie_multi_beacon(const struct wpa_bss *bss,
u32 vendor_type)
{
}
+/**
+ * wpa_bss_get_max_rate - Get maximum legacy TX rate supported in a BSS
+ * @bss: BSS table entry
+ * Returns: Maximum legacy rate in units of 500 kbps
+ */
int wpa_bss_get_max_rate(const struct wpa_bss *bss)
{
int rate = 0;
}
+/**
+ * wpa_bss_get_bit_rates - Get legacy TX rates supported in a BSS
+ * @bss: BSS table entry
+ * @rates: Buffer for returning a pointer to the rates list (units of 500 kbps)
+ * Returns: number of legacy TX rates or -1 on failure
+ *
+ * The caller is responsible for freeing the returned buffer with os_free() in
+ * case of success.
+ */
int wpa_bss_get_bit_rates(const struct wpa_bss *bss, u8 **rates)
{
const u8 *ie, *ie2;
#define WPA_BSS_ASSOCIATED BIT(5)
#define WPA_BSS_ANQP_FETCH_TRIED BIT(6)
+/**
+ * struct wpa_bss_anqp - ANQP data for a BSS entry (struct wpa_bss)
+ */
struct wpa_bss_anqp {
+ /** Number of BSS entries referring to this ANQP data instance */
unsigned int users;
#ifdef CONFIG_INTERWORKING
struct wpabuf *venue_name;
/**
* struct wpa_bss - BSS table
- * @list: List entry for struct wpa_supplicant::bss
- * @list_id: List entry for struct wpa_supplicant::bss_id
- * @id: Unique identifier for this BSS entry
- * @scan_miss_count: Number of counts without seeing this BSS
- * @flags: information flags about the BSS/IBSS (WPA_BSS_*)
- * @last_update_idx: Index of the last scan update
- * @bssid: BSSID
- * @hessid: HESSID
- * @freq: frequency of the channel in MHz (e.g., 2412 = channel 1)
- * @beacon_int: beacon interval in TUs (host byte order)
- * @caps: capability information field in host byte order
- * @qual: signal quality
- * @noise: noise level
- * @level: signal level
- * @tsf: Timestamp of last Beacon/Probe Response frame
- * @last_update: Time of the last update (i.e., Beacon or Probe Response RX)
- * @ie_len: length of the following IE field in octets (from Probe Response)
- * @beacon_ie_len: length of the following Beacon IE field in octets
*
* This structure is used to store information about neighboring BSSes in
* generic format. It is mainly updated based on scan results from the driver.
*/
struct wpa_bss {
+ /** List entry for struct wpa_supplicant::bss */
struct dl_list list;
+ /** List entry for struct wpa_supplicant::bss_id */
struct dl_list list_id;
+ /** Unique identifier for this BSS entry */
unsigned int id;
+ /** Number of counts without seeing this BSS */
unsigned int scan_miss_count;
+ /** Index of the last scan update */
unsigned int last_update_idx;
+ /** Information flags about the BSS/IBSS (WPA_BSS_*) */
unsigned int flags;
+ /** BSSID */
u8 bssid[ETH_ALEN];
+ /** HESSID */
u8 hessid[ETH_ALEN];
+ /** SSID */
u8 ssid[32];
+ /** Length of SSID */
size_t ssid_len;
+ /** Frequency of the channel in MHz (e.g., 2412 = channel 1) */
int freq;
+ /** Beacon interval in TUs (host byte order) */
u16 beacon_int;
+ /** Capability information field in host byte order */
u16 caps;
+ /** Signal quality */
int qual;
+ /** Noise level */
int noise;
+ /** Signal level */
int level;
+ /** Timestamp of last Beacon/Probe Response frame */
u64 tsf;
+ /** Time of the last update (i.e., Beacon or Probe Response RX) */
struct os_time last_update;
+ /** ANQP data */
struct wpa_bss_anqp *anqp;
+ /** Length of the following IE field in octets (from Probe Response) */
size_t ie_len;
+ /** Length of the following Beacon IE field in octets */
size_t beacon_ie_len;
/* followed by ie_len octets of IEs */
/* followed by beacon_ie_len octets of IEs */
/*
* WPA Supplicant - Scanning
- * Copyright (c) 2003-2010, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2003-2012, Jouni Malinen <j@w1.fi>
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
#endif /* CONFIG_WPS */
+/**
+ * wpa_supplicant_enabled_networks - Check whether there are enabled networks
+ * @wpa_s: Pointer to wpa_supplicant data
+ * Returns: 0 if no networks are enabled, >0 if networks are enabled
+ *
+ * This function is used to figure out whether any networks (or Interworking
+ * with enabled credentials and auto_interworking) are present in the current
+ * configuration.
+ */
int wpa_supplicant_enabled_networks(struct wpa_supplicant *wpa_s)
{
struct wpa_ssid *ssid = wpa_s->conf->ssid;
}
+/**
+ * wpa_supplicant_trigger_scan - Request driver to start a scan
+ * @wpa_s: Pointer to wpa_supplicant data
+ * @params: Scan parameters
+ * Returns: 0 on success, -1 on failure
+ */
int wpa_supplicant_trigger_scan(struct wpa_supplicant *wpa_s,
struct wpa_driver_scan_params *params)
{
* @wpa_s: Pointer to wpa_supplicant data
* @sec: Number of seconds after which to scan
* @usec: Number of microseconds after which to scan
+ * Returns: 0 on success or -1 otherwise
*
* This function is used to schedule periodic scans for neighboring
* access points after the specified time.
/**
* wpa_supplicant_req_sched_scan - Start a periodic scheduled scan
* @wpa_s: Pointer to wpa_supplicant data
+ * Returns: 0 is sched_scan was started or -1 otherwise
*
* This function is used to schedule periodic scans for neighboring
* access points repeating the scan continuously.
}
+/**
+ * wpa_supplicant_notify_scanning - Indicate possible scan state change
+ * @wpa_s: Pointer to wpa_supplicant data
+ * @scanning: Whether scanning is currently in progress
+ *
+ * This function is to generate scanning notifycations. It is called whenever
+ * there may have been a change in scanning (scan started, completed, stopped).
+ * wpas_notify_scanning() is called whenever the scanning state changed from the
+ * previously notified state.
+ */
void wpa_supplicant_notify_scanning(struct wpa_supplicant *wpa_s,
int scanning)
{
}
+/**
+ * wpa_scan_get_ie - Fetch a specified information element from a scan result
+ * @res: Scan result entry
+ * @ie: Information element identitifier (WLAN_EID_*)
+ * Returns: Pointer to the information element (id field) or %NULL if not found
+ *
+ * This function returns the first matching information element in the scan
+ * result.
+ */
const u8 * wpa_scan_get_ie(const struct wpa_scan_res *res, u8 ie)
{
const u8 *end, *pos;
}
+/**
+ * wpa_scan_get_vendor_ie - Fetch vendor information element from a scan result
+ * @res: Scan result entry
+ * @vendor_type: Vendor type (four octets starting the IE payload)
+ * Returns: Pointer to the information element (id field) or %NULL if not found
+ *
+ * This function returns the first matching information element in the scan
+ * result.
+ */
const u8 * wpa_scan_get_vendor_ie(const struct wpa_scan_res *res,
u32 vendor_type)
{
}
+/**
+ * wpa_scan_get_vendor_ie_multi - Fetch vendor IE data from a scan result
+ * @res: Scan result entry
+ * @vendor_type: Vendor type (four octets starting the IE payload)
+ * Returns: Pointer to the information element payload or %NULL if not found
+ *
+ * This function returns concatenated payload of possibly fragmented vendor
+ * specific information elements in the scan result. The caller is responsible
+ * for freeing the returned buffer.
+ */
struct wpabuf * wpa_scan_get_vendor_ie_multi(const struct wpa_scan_res *res,
u32 vendor_type)
{
}
+/**
+ * wpa_scan_get_vendor_ie_multi_beacon - Fetch vendor IE data from a scan result
+ * @res: Scan result entry
+ * @vendor_type: Vendor type (four octets starting the IE payload)
+ * Returns: Pointer to the information element payload or %NULL if not found
+ *
+ * This function returns concatenated payload of possibly fragmented vendor
+ * specific information elements in the scan result. The caller is responsible
+ * for freeing the returned buffer.
+ *
+ * This function is like wpa_scan_get_vendor_ie_multi(), but uses IE buffer only
+ * from Beacon frames instead of either Beacon or Probe Response frames.
+ */
struct wpabuf * wpa_scan_get_vendor_ie_multi_beacon(
const struct wpa_scan_res *res, u32 vendor_type)
{
}
+/**
+ * wpa_supplicant_filter_bssid_match - Is the specified BSSID allowed
+ * @wpa_s: Pointer to wpa_supplicant data
+ * @bssid: BSSID to check
+ * Returns: 0 if the BSSID is filtered or 1 if not
+ *
+ * This function is used to filter out specific BSSIDs from scan reslts mainly
+ * for testing purposes (SET bssid_filter ctrl_iface command).
+ */
int wpa_supplicant_filter_bssid_match(struct wpa_supplicant *wpa_s,
const u8 *bssid)
{
}
+/**
+ * wpa_supplicant_update_scan_results - Update scan results from the driver
+ * @wpa_s: Pointer to wpa_supplicant data
+ * Returns: 0 on success, -1 on failure
+ *
+ * This function updates the BSS table within wpa_supplicant based on the
+ * currently available scan results from the driver without requesting a new
+ * scan. This is used in cases where the driver indicates an association
+ * (including roaming within ESS) and wpa_supplicant does not yet have the
+ * needed information to complete the connection (e.g., to perform validation
+ * steps in 4-way handshake).
+ */
int wpa_supplicant_update_scan_results(struct wpa_supplicant *wpa_s)
{
struct wpa_scan_results *scan_res;
projects / thirdparty / hostap.git / commitdiff
