]>
git.ipfire.org Git - thirdparty/hostap.git/log
Jouni Malinen [Wed, 28 Dec 2016 23:15:11 +0000 (01:15 +0200)]
tests: WPA2-PSK-FT AP over DS disabled
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Wed, 28 Dec 2016 23:13:59 +0000 (01:13 +0200)]
FT: Drop FT Action frames if ft_over_ds=0
Previously, the hostapd ft_over_ds parameter was used to only advertise
whether FT-over-DS is enabled in MDE and leave it to the stations to
follow that advertisement. This commit extends this to explicitly reject
(silently drop) FT Action frames if a station does not follow the
advertised capabilities.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Wed, 28 Dec 2016 23:06:11 +0000 (01:06 +0200)]
tests: RADIUS Dynamic Authorization Extensions - Disconnect - time window
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Wed, 28 Dec 2016 18:10:18 +0000 (20:10 +0200)]
tests: Additional radius_auth/acct_req_attr coverage
The third attribute is needed in the list to cover full parsing code
coverage.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Wed, 28 Dec 2016 16:11:13 +0000 (18:11 +0200)]
tests: IEEE 802.1X and EAPOL-Key index workaround
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Wed, 28 Dec 2016 16:04:42 +0000 (18:04 +0200)]
tests: WPA2-Enterprise using EAP-SIM with zero database timeout
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Wed, 28 Dec 2016 15:53:06 +0000 (17:53 +0200)]
tests: EAP-FAST and provisioning options
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Wed, 28 Dec 2016 13:04:53 +0000 (15:04 +0200)]
tests: hostapd eapol_version configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Wed, 28 Dec 2016 11:11:12 +0000 (13:11 +0200)]
tests: hostapd configuration SET OOM and error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Wed, 28 Dec 2016 10:34:33 +0000 (12:34 +0200)]
Remove deprecated tx_queue_* params from hostapd.conf notes
The after_beacon and beacon TX queue parameters has not been
configurable through this mechanism for years, so do not list them in
hostapd.conf notes.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Wed, 28 Dec 2016 10:13:07 +0000 (12:13 +0200)]
tests: hostapd eap_user_file parsing
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Wed, 28 Dec 2016 10:12:14 +0000 (12:12 +0200)]
Fix memory leak on hostapd eap_user_file parsing error paths
Need to free all the pending completed EAP users if a parsing error
prevents the file from being used.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 22:57:25 +0000 (00:57 +0200)]
tests: hostapd vlan_file/mac_file parsing
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 22:58:21 +0000 (00:58 +0200)]
hostapd: Remove unnecessary NULL check from parser functions
The fname argument cannot be NULL in these location.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 22:38:51 +0000 (00:38 +0200)]
tests: hostapd global ctrl_iface DETACH failure
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 22:30:41 +0000 (00:30 +0200)]
tests: hostapd and TEST_ALLOC_FAIL/TEST_FAIL
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 22:25:46 +0000 (00:25 +0200)]
tests: hostapd and SET accept_mac_file ctrl_iface command (VLAN ID)
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 19:21:55 +0000 (21:21 +0200)]
tests: hostapd global control interface with unknown IFNAME= prefix
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 19:20:57 +0000 (21:20 +0200)]
tests: hostapd DUP_NETWORK error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 19:14:34 +0000 (21:14 +0200)]
tests: hostapd global ctrl_iface INTERFACES
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 19:10:45 +0000 (21:10 +0200)]
tests: hostapd and UPDATE_BEACON
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 18:55:12 +0000 (20:55 +0200)]
tests: hostapd and POLL_STA errors
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 18:52:57 +0000 (20:52 +0200)]
tests: Invalid hostapd STA ctrl_iface command subparameter
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 18:51:07 +0000 (20:51 +0200)]
tests: sae_group in hostapd STA ctrl_iface command
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 18:48:11 +0000 (20:48 +0200)]
tests: hostapd and RELOG
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 18:46:10 +0000 (20:46 +0200)]
tests: More SET_NEIGHBOR and REMOVE_NEIGHBOR error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 18:36:14 +0000 (20:36 +0200)]
tests: More hostapd REQ_RANGE error case coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 18:28:23 +0000 (20:28 +0200)]
tests: hostapd and EAPOL_REAUTH errors
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 18:27:08 +0000 (20:27 +0200)]
tests: hostapd and VENDOR errors
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 18:22:05 +0000 (20:22 +0200)]
tests: hostapd and external I/O errors
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 18:05:12 +0000 (20:05 +0200)]
tests: hostapd and RADAR ctrl_iface command
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 17:59:22 +0000 (19:59 +0200)]
tests: WPS PIN provisioning with configured AP using dummy cred
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 17:59:03 +0000 (19:59 +0200)]
tests: More hostapd SET command coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 17:24:34 +0000 (19:24 +0200)]
tests: More hostapd GET_CONFIG key_mgmt coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 17:20:42 +0000 (19:20 +0200)]
tests: More BSS_TM_REQ coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 17:08:31 +0000 (19:08 +0200)]
Fix memory leak in hostapd BSS_TM_REQ error path handling
The optional url=<URL> parameter was stored in allocated memory and that
memory was leaked if some following parameter parsing attempts failed.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 15:22:11 +0000 (17:22 +0200)]
tests: More hostapd ctrl_iface QoS Map error coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 15:17:43 +0000 (17:17 +0200)]
tests: HS20_DEAUTH_REQ OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 15:14:49 +0000 (17:14 +0200)]
tests: Additional HS20_WNM_NOTIF coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 15:11:27 +0000 (17:11 +0200)]
Remove trailing whitespace
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 15:07:11 +0000 (17:07 +0200)]
tests: Remove trailing whitespace
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 15:04:30 +0000 (17:04 +0200)]
tests: Additional hostapd WPS control interface coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 14:38:20 +0000 (16:38 +0200)]
tests: Additional SA_QUERY coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 14:35:08 +0000 (16:35 +0200)]
tests: Additional hostapd NEW_STA coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 12:50:56 +0000 (14:50 +0200)]
tests: hostapd BSS config file
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 12:50:14 +0000 (14:50 +0200)]
hostapd: Add TERMINATE as per-interface command
This was already avaialble through the global control interface, but not
the per-interface one.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 12:27:03 +0000 (14:27 +0200)]
tests: hostapd -i command line argument
This adds some more code coverage reachability testing.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 12:23:46 +0000 (14:23 +0200)]
tests: hostapd SIGUSR1
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 10:39:44 +0000 (12:39 +0200)]
tests: Ignoring invalid hostapd configuration parameter updates
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 10:24:02 +0000 (12:24 +0200)]
hostapd: Do not update dtim_period with invalid value
Previously, the update command was rejected, but the actual value was
updated.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 10:14:48 +0000 (12:14 +0200)]
RADIUS server: Increase maximum number of sessions
It was possible to hit the previously used maximum of 100 active session
in some hwsim test case sequences like this one: eap_proto_pwd_errors
eap_proto_ikev2_errors eap_proto_sim_errors. This happened due to the
large number of RADIUS authentication iterations in short period of
time, i.e., within the 10 second timeout for expiring completed
sessions.
Increase RADIUS_MAX_SESSION from 100 to 1000 and also reduce the timeout
on expiring completed sessions from 10 to 5 seconds.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 10:02:53 +0000 (12:02 +0200)]
hostapd: Do not update invalid wep_key_len_unicast
Previously, the update command was rejected, but the configuration
parameter value was updated anyway.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 10:00:26 +0000 (12:00 +0200)]
hostapd: Do not update rejected wep_key_len_broadcast
Previously, update command with invalid value got rejected, but the
actual configuration data was updated anyway.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 09:46:04 +0000 (11:46 +0200)]
hostapd: Do not update eapol_version with rejected value
Previously, an invalid eapol_version update command was rejected, but
the actual configuration value was updated.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 09:43:13 +0000 (11:43 +0200)]
hostapd: Reject invalid macaddr_acl value
Previously, this was noted in error log, but the invalid value was
stored in the configuration without rejecting it.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Tue, 27 Dec 2016 09:33:35 +0000 (11:33 +0200)]
hostapd: Check driver parameter before replacing previous value
This leaves the previously configured value in place if "SET driver ..."
command fails.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Mon, 26 Dec 2016 22:56:46 +0000 (00:56 +0200)]
tests: hostapd configuration reload
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Mon, 26 Dec 2016 22:55:32 +0000 (00:55 +0200)]
Fix hostapd SIGHUP processing before interface is enabled
It was possible to try to do driver operations before the driver
interface had been initialized when processing a SIGHUP signal. This
would result in NULL pointer dereference. Fix this by skipping the steps
when SIGHUP is issued before the interface is enabled.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Mon, 26 Dec 2016 22:21:01 +0000 (00:21 +0200)]
tests: IEEE 802.1X connection using static WEP104
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Mon, 26 Dec 2016 22:17:34 +0000 (00:17 +0200)]
tests: Invalid TX queue params set (cwmin/cwmax)
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Mon, 26 Dec 2016 22:07:29 +0000 (00:07 +0200)]
tests: MBO and WPA2 without PMF
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Mon, 26 Dec 2016 20:05:10 +0000 (22:05 +0200)]
tests: WPS getting disabled due to conflicting parameters
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Mon, 26 Dec 2016 19:59:02 +0000 (21:59 +0200)]
tests: VHT and TKIP
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Mon, 26 Dec 2016 19:54:57 +0000 (21:54 +0200)]
tests: Duplicate BSSID
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Mon, 26 Dec 2016 19:21:10 +0000 (21:21 +0200)]
tests: WPA2-PSK AP and no PSK configured
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Mon, 26 Dec 2016 16:39:49 +0000 (18:39 +0200)]
tests: Invalid VLAN ID from RADIUS server for ACL
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Mon, 26 Dec 2016 16:28:40 +0000 (18:28 +0200)]
tests: Cover both binary search branches in hostapd_maclist_found()
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Mon, 26 Dec 2016 15:53:07 +0000 (17:53 +0200)]
tests: Make hostapd_oom_wpa2_psk catch cases more robustly
For some reason, a potential OOM in hostapd_config_read_wpa_psk() and
hostapd_derive_psk() were missed in --codecov runs during the main
iteration loop. Cover these specific cases with separate instances to
avoid missing coverage.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Mon, 26 Dec 2016 15:42:41 +0000 (17:42 +0200)]
Remove unnecessary NULL check from hostapd_config_read_wpa_psk() call
This function is already checking the fname argument against NULL, so
use that check on its own instead of duplicating the check in the only
caller.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Mon, 26 Dec 2016 12:50:28 +0000 (14:50 +0200)]
tests: FILS SK authentication with SHA384
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Mon, 26 Dec 2016 12:44:44 +0000 (14:44 +0200)]
tests: More ieee802_11_vendor_ie_concat() coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Mon, 26 Dec 2016 11:12:06 +0000 (13:12 +0200)]
tests: VHT with 160 MHz channel width and HT40 disabled
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Mon, 26 Dec 2016 10:43:06 +0000 (12:43 +0200)]
tests: VHT 160 MHz tests with all different HT primary channels
This extends previous ap_vht160_no_dfs test case coverage by running the
same test case with each of the possible HT primary channel
alternatives.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Mon, 26 Dec 2016 10:22:56 +0000 (12:22 +0200)]
tests: SAE protocol testing with hostapd
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Mon, 26 Dec 2016 10:09:53 +0000 (12:09 +0200)]
tests: Remove src/common/cli.c from code coverage report
This file is used only by hostapd_cli and wpa_cli and neither of those
are currently included in code coverage reporting. Avoid dropping the
coverage numbers by code that cannot be reached due to not being
included in the programs that are covered.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Sun, 25 Dec 2016 22:48:34 +0000 (00:48 +0200)]
tests: More ieee802_11_parse_elems() coverage for new elements
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Sun, 25 Dec 2016 10:26:48 +0000 (12:26 +0200)]
tests: Operating classes with HT20 and HT40 channels
Signed-off-by: Jouni Malinen <j@w1.fi>
Badrish Adiga H R [Mon, 5 Dec 2016 14:53:55 +0000 (06:53 -0800)]
mka: Make MKA actor priority configurable
This adds a new wpa_supplicant network profile parameter
mka_priority=0..255 to set the priority of the MKA Actor.
Signed-off-by: Badrish Adiga H R <badrish.adigahr@gmail.com>
Jouni Malinen [Sat, 24 Dec 2016 23:09:06 +0000 (01:09 +0200)]
tests: Fix p2p_autogo_pref_chan_not_in_regulatory with new regdb
5745 MHz was added as an allowed short range device range in
wireless-regdb for DE which made this test case fail. Fix it for now by
using SE instead of DE for the second part of the test case.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Sat, 24 Dec 2016 22:47:01 +0000 (00:47 +0200)]
tests: Fix mesh_open_vht_160 skipping
It is possible for wireless-regdb to include a 160 MHz channel, but with
DFS required. This test case need the regulatory information to allow
160 MHz channel without DFS. Fix false failures by skipping the test if
this exact combination is not found.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Sat, 24 Dec 2016 22:38:52 +0000 (00:38 +0200)]
tests: Fix peerkey_sniffer_check with newer Wireshark version
Wireshark renamed eapol.keydes.key_info to
wlan_rsna_eapol.keydes.key_info and that broke this test case when
upgrading Wireshark. Fix this by trying to use both the new and the old
name.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Sat, 24 Dec 2016 22:15:58 +0000 (00:15 +0200)]
tests: Fix eap_fast_tlv_nak_oom and eap_fast_proto_phase2
Something broke eap_fast_tlv_nak_oom when moving from Ubuntu 14.04 to
16.04. OpenSSL.SSL.Connection() state_string() returns None in these
cases and the debug log prints for that were causing the case to fail.
For now, work around this by checking whether the state string is None
before trying to print it.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Sat, 24 Dec 2016 11:09:23 +0000 (13:09 +0200)]
tests: Clear monitor socket within p2p_msg_unexpected_go_neg_resp
This makes the debug log easier to understand and avoids leaving large
number of pending messages into the wpa_supplicant control interface
sockets.
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Fri, 23 Dec 2016 19:28:22 +0000 (21:28 +0200)]
Document new D-Bus WPS properties
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Fri, 23 Dec 2016 11:11:29 +0000 (13:11 +0200)]
tests: Additional D-Bus WPS Get/Set properties
Signed-off-by: Jouni Malinen <j@w1.fi>
Jouni Malinen [Fri, 23 Dec 2016 09:22:00 +0000 (11:22 +0200)]
D-Bus: Use a helper function to get possibly NULL strings
This type of check is used in quite a few getter functions, so add a
helper function to take care of it.
Signed-off-by: Jouni Malinen <j@w1.fi>
Avichal Agarwal [Wed, 21 Dec 2016 12:24:25 +0000 (17:54 +0530)]
D-Bus: Add DeviceType in WPS property
Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
Avichal Agarwal [Wed, 21 Dec 2016 12:24:24 +0000 (17:54 +0530)]
D-Bus: Add device serial number in WPS property
Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
Avichal Agarwal [Wed, 21 Dec 2016 12:24:23 +0000 (17:54 +0530)]
D-Bus: Add model number in WPS property
Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
Avichal Agarwal [Wed, 21 Dec 2016 12:24:22 +0000 (17:54 +0530)]
D-Bus: Add WPS model name as property
Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
Signed-off-by: Kyeong-Chae Lim <kcya.lim@samsung.com>
Avichal Agarwal [Wed, 21 Dec 2016 12:24:21 +0000 (17:54 +0530)]
D-Bus: Add WPS manufacturer as property
Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
Signed-off-by: Kyeong-Chae Lim <kcya.lim@samsung.com>
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
Avichal Agarwal [Wed, 21 Dec 2016 12:24:20 +0000 (17:54 +0530)]
D-Bus: Add WPS device name as property
Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
Signed-off-by: Kyeong-Chae Lim <kcya.lim@samsung.com>
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
Jouni Malinen [Thu, 22 Dec 2016 12:17:48 +0000 (14:17 +0200)]
tests: Check MESH flag in BSS output in wpas_mesh_mode_scan
In addition, use a single channel scan to make the test case run faster.
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Sunil Dutt [Fri, 16 Dec 2016 12:50:15 +0000 (18:20 +0530)]
mesh: Show [MESH] flag in print_bss_info()
This was previously done for SCAN_RESULTS, but the BSS control interface
command did not show a similar flag. In addition, change "WPA2" to "RSN"
for mesh BSS to be consistent with the SCAN_RESULTS output.
Commit
638d945679649da579c4ed734d4ebae87e2307de ('mesh: Show [MESH] flag
in scan results') did similar changes for SCAN_RESULTS.
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Mikael Kanstrup [Wed, 21 Dec 2016 10:27:20 +0000 (11:27 +0100)]
hostapd_cli: Add completion for get command
Add command completion support for get command.
Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
Mikael Kanstrup [Wed, 21 Dec 2016 10:27:19 +0000 (11:27 +0100)]
hostapd_cli: Add completion for set command
Add command completion support for set command.
Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
Mikael Kanstrup [Wed, 21 Dec 2016 10:27:18 +0000 (11:27 +0100)]
hostapd_cli: Completion for further commands with STA parameter
Yet some more commands take STA address as the only parameter. Add
command completion support for the following commands:
signature, sa_query, send_qos_map_conf and req_lci
Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
Mikael Kanstrup [Wed, 21 Dec 2016 10:27:17 +0000 (11:27 +0100)]
hostapd_cli: Use common completion for commands that use stations
More than one command takes STA address as the only parameter. Make use
of a common completion routine.
Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
Mikael Kanstrup [Wed, 21 Dec 2016 10:27:16 +0000 (11:27 +0100)]
hostapd_cli: Add missing command help descriptions
Some commands are missing help description making them not show up in
the list of supported commands. Add command help description for all
missing commands.
Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
Joel Cunningham [Mon, 19 Dec 2016 22:34:24 +0000 (16:34 -0600)]
Fix wpa_cipher_to_alg() return type
wpa_cipher_to_alg() returns enumerated values from enum wpa_alg and all
uses of the return value treat it as enum wpa_alg (by either assigning
it to a variable of type enum wpa_alg or passing to a function that
expects enum wpa_alg).
This commit updates the return value to match the expected usage
(enum wpa_alg) rather than int. This ensures the return value is
of the proper type and eliminates the following compiler warnings:
ARM RVCT (2.2):
'Warning: #188-D: enumerated type mixed with another type'
Signed-off-by: Joel Cunningham <joel.cunningham@me.com>