* use in a FILS shared key connection with PMKSA caching.
*/
+/**
+ * DOC: SAE authentication offload
+ *
+ * By setting @NL80211_EXT_FEATURE_SAE_OFFLOAD flag drivers can indicate they
+ * support offloading SAE authentication for WPA3-Personal networks. In
+ * %NL80211_CMD_CONNECT the password for SAE should be specified using
+ * %NL80211_ATTR_SAE_PASSWORD.
+ */
+
/**
* enum nl80211_commands - supported nl80211 commands
*
* is used during CSA period.
* @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
* command may be used with the corresponding cookie to cancel the wait
- * time if it is known that it is no longer necessary.
+ * time if it is known that it is no longer necessary. This command is
+ * also sent as an event whenever the driver has completed the off-channel
+ * wait time.
* @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
* @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
* transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
* should be picking up the lowest tx power, either tx power per-interface
* or per-station.
*
+ * @NL80211_ATTR_SAE_PASSWORD: attribute for passing SAE password material. It
+ * is used with %NL80211_CMD_CONNECT to provide password for offloading
+ * SAE authentication for WPA3-Personal networks.
+ *
+ * @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support.
+ *
+ * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection
+ * functionality.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
NL80211_ATTR_STA_TX_POWER_SETTING,
NL80211_ATTR_STA_TX_POWER,
+ NL80211_ATTR_SAE_PASSWORD,
+
+ NL80211_ATTR_TWT_RESPONDER,
+
+ NL80211_ATTR_HE_OBSS_PD,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
#define NL80211_HT_CAPABILITY_LEN 26
#define NL80211_VHT_CAPABILITY_LEN 12
#define NL80211_HE_MIN_CAPABILITY_LEN 16
-#define NL80211_HE_MAX_CAPABILITY_LEN 51
+#define NL80211_HE_MAX_CAPABILITY_LEN 54
#define NL80211_MAX_NR_CIPHER_SUITES 5
#define NL80211_MAX_NR_AKM_SUITES 2
enum nl80211_wpa_versions {
NL80211_WPA_VERSION_1 = 1 << 0,
NL80211_WPA_VERSION_2 = 1 << 1,
+ NL80211_WPA_VERSION_3 = 1 << 2,
};
/**
NL80211_FEATURE_TDLS_CHANNEL_SWITCH = 1 << 28,
NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR = 1 << 29,
NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR = 1 << 30,
- NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1 << 31,
+ NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1U << 31,
};
/**
* @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power
* to a station.
*
+ * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in
+ * station mode (SAE password is passed as part of the connect command).
+ *
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD,
NL80211_EXT_FEATURE_EXT_KEY_ID,
NL80211_EXT_FEATURE_STA_TX_PWR,
+ NL80211_EXT_FEATURE_SAE_OFFLOAD,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
NL80211_PMSR_FTM_RESP_ATTR_MAX = NUM_NL80211_PMSR_FTM_RESP_ATTR - 1
};
+/**
+ * enum nl80211_obss_pd_attributes - OBSS packet detection attributes
+ * @__NL80211_HE_OBSS_PD_ATTR_INVALID: Invalid
+ *
+ * @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset.
+ * @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset.
+ *
+ * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal
+ * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute.
+ */
+enum nl80211_obss_pd_attributes {
+ __NL80211_HE_OBSS_PD_ATTR_INVALID,
+
+ NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET,
+ NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET,
+
+ /* keep last */
+ __NL80211_HE_OBSS_PD_ATTR_LAST,
+ NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1,
+};
+
+
#endif /* __LINUX_NL80211_H */