update nl80211.h

diff --git a/nl80211.h b/nl80211.h
index 7df9b500c80493e944591a2192b07253f1b42669..0e6277a06c29076b30e2e40098c905a1c97cdfb0 100644 (file)
--- a/nl80211.h
+++ b/nl80211.h
@@ -1273,6 +1273,14 @@ enum nl80211_commands {
  *     the connection request from a station. nl80211_connect_failed_reason
  *     enum has different reasons of connection failure.
  *
+ * @NL80211_ATTR_SAE_DATA: SAE elements in Authentication frames. This starts
+ *     with the Authentication transaction sequence number field.
+ *
+ * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from
+ *     association request when used with NL80211_CMD_NEW_STATION)
+ *
+ * @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32)
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1530,6 +1538,12 @@ enum nl80211_attrs {
 
        NL80211_ATTR_CONN_FAILED_REASON,
 
+       NL80211_ATTR_SAE_DATA,
+
+       NL80211_ATTR_VHT_CAPABILITY,
+
+       NL80211_ATTR_SCAN_FLAGS,
+
        /* add attributes here, update the policy in nl80211.c */
 
        __NL80211_ATTR_AFTER_LAST,
@@ -1573,6 +1587,7 @@ enum nl80211_attrs {
 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY    16
 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY    24
 #define NL80211_HT_CAPABILITY_LEN              26
+#define NL80211_VHT_CAPABILITY_LEN             12
 
 #define NL80211_MAX_NR_CIPHER_SUITES           5
 #define NL80211_MAX_NR_AKM_SUITES              2
@@ -2489,6 +2504,7 @@ enum nl80211_bss_status {
  * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
  * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
  * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
+ * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals
  * @__NL80211_AUTHTYPE_NUM: internal
  * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
  * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
@@ -2500,6 +2516,7 @@ enum nl80211_auth_type {
        NL80211_AUTHTYPE_SHARED_KEY,
        NL80211_AUTHTYPE_FT,
        NL80211_AUTHTYPE_NETWORK_EAP,
+       NL80211_AUTHTYPE_SAE,
 
        /* keep last */
        __NL80211_AUTHTYPE_NUM,
@@ -3028,6 +3045,11 @@ enum nl80211_ap_sme_features {
  *     in the interface combinations, even when it's only used for scan
  *     and remain-on-channel. This could be due to, for example, the
  *     remain-on-channel implementation requiring a channel context.
+ * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of
+ *     equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station
+ *     mode
+ * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan
+ * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported
  */
 enum nl80211_feature_flags {
        NL80211_FEATURE_SK_TX_STATUS                    = 1 << 0,
@@ -3035,6 +3057,9 @@ enum nl80211_feature_flags {
        NL80211_FEATURE_INACTIVITY_TIMER                = 1 << 2,
        NL80211_FEATURE_CELL_BASE_REG_HINTS             = 1 << 3,
        NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL        = 1 << 4,
+       NL80211_FEATURE_SAE                             = 1 << 5,
+       NL80211_FEATURE_LOW_PRIORITY_SCAN               = 1 << 6,
+       NL80211_FEATURE_SCAN_FLUSH                      = 1 << 7,
 };
 
 /**
@@ -3069,4 +3094,19 @@ enum nl80211_connect_failed_reason {
        NL80211_CONN_FAIL_BLOCKED_CLIENT,
 };
 
+/**
+ * enum nl80211_scan_flags -  scan request control flags
+ *
+ * Scan request control flags are used to control the handling
+ * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN
+ * requests.
+ *
+ * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority
+ * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning
+ */
+enum nl80211_scan_flags {
+       NL80211_SCAN_FLAG_LOW_PRIORITY                  = 1<<0,
+       NL80211_SCAN_FLAG_FLUSH                         = 1<<1,
+};
+
 #endif /* __LINUX_NL80211_H */