Merge tag 'probes-fixes-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
"Fix possible use-after-free issue on kprobe registration.
check_kprobe_address_safe() uses `is_module_text_address()` and
`__module_text_address()` separately.
As a result, if the probed address is in a module that is being
unloaded, the first `is_module_text_address()` might return true but
then the `__module_text_address()` call might return NULL if the
module has been unloaded between the two.
The result is that kprobe believes the probe is on the kernel text,
and skips getting a module reference. In this case, when it arms a
breakpoint on the probe address, it may cause a use-after-free.
To fix this issue, only use `__module_text_address()` once and get a
reference to the module then. If it fails, reject the probe"
* tag 'probes-fixes-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Fix possible use-after-free issue on kprobe registration
Merge tag 'bootconfig-fixes-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig fixes from Masami Hiramatsu:
- show the original cmdline only once, and only if it was modeified by
bootconfig
* tag 'bootconfig-fixes-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fs/proc: Skip bootloader comment if no embedded kernel parameters
fs/proc: remove redundant comments from /proc/bootconfig
- toshiba_acpi: Ignore 2 keys to avoid log noise during
suspend/resume
- intel-vbtn: Fix probe by restoring VBDL and VGBS evalutation order
- lg-laptop: Fix W=1 %s null argument warning
New HW Support:
- acer-wmi: PH18-71 mode button and fan speed sensor
- intel/hid: Lunar Lake and Arrow Lake HID IDs"
* tag 'platform-drivers-x86-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: lg-laptop: fix %s null argument warning
platform/x86: intel-vbtn: Update tablet mode switch at end of probe
platform/x86: intel-vbtn: Use acpi_has_method to check for switch
platform/x86: toshiba_acpi: Silence logging for some events
platform/x86/intel/hid: Add Lunar Lake and Arrow Lake support
platform/x86/intel/hid: Don't wake on 5-button releases
platform/x86: acer-wmi: Add support for Acer PH18-71
kprobes: Fix possible use-after-free issue on kprobe registration
When unloading a module, its state is changing MODULE_STATE_LIVE ->
MODULE_STATE_GOING -> MODULE_STATE_UNFORMED. Each change will take
a time. `is_module_text_address()` and `__module_text_address()`
works with MODULE_STATE_LIVE and MODULE_STATE_GOING.
If we use `is_module_text_address()` and `__module_text_address()`
separately, there is a chance that the first one is succeeded but the
next one is failed because module->state becomes MODULE_STATE_UNFORMED
between those operations.
In `check_kprobe_address_safe()`, if the second `__module_text_address()`
is failed, that is ignored because it expected a kernel_text address.
But it may have failed simply because module->state has been changed
to MODULE_STATE_UNFORMED. In this case, arm_kprobe() will try to modify
non-exist module text address (use-after-free).
To fix this problem, we should not use separated `is_module_text_address()`
and `__module_text_address()`, but use only `__module_text_address()`
once and do `try_module_get(module)` which is only available with
MODULE_STATE_LIVE.
Zhang Rui [Tue, 12 Mar 2024 15:56:02 +0000 (23:56 +0800)]
tools/power/turbostat: Add support for Xe sysfs knobs
Xe graphics driver uses different graphics sysfs knobs including
/sys/class/drm/card0/device/tile0/gt0/gtidle/idle_residency_ms
/sys/class/drm/card0/device/tile0/gt0/freq0/cur_freq
/sys/class/drm/card0/device/tile0/gt0/freq0/act_freq
/sys/class/drm/card0/device/tile0/gt1/gtidle/idle_residency_ms
/sys/class/drm/card0/device/tile0/gt1/freq0/cur_freq
/sys/class/drm/card0/device/tile0/gt1/freq0/act_freq
Plus that,
/sys/class/drm/card0/device/tile0/gt<n>/gtidle/name
returns either gt<n>-rc or gt<n>-mc. rc is for GFX and mc is SA Media.
Enhance turbostat to prefer the Xe sysfs knobs when they are available.
Export gt<n>-rc via BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz.
Export gt<n>-mc via BIC_SMA_mc6/BIC_SMAMHz/BIC_SMAACTMHz.
Zhang Rui [Fri, 22 Mar 2024 01:52:24 +0000 (09:52 +0800)]
tools/power/turbostat: Add support for new i915 sysfs knobs
On Meteorlake platform, i915 driver supports the traditional graphics
sysfs knobs including
/sys/class/drm/card0/power/rc6_residency_ms
/sys/class/drm/card0/gt_cur_freq_mhz
/sys/class/drm/card0/gt_act_freq_mhz
At the same time, it also supports
/sys/class/drm/card0/gt/gt0/rc6_residency_ms
/sys/class/drm/card0/gt/gt0/rps_cur_freq_mhz
/sys/class/drm/card0/gt/gt0/rps_act_freq_mhz
/sys/class/drm/card0/gt/gt1/rc6_residency_ms
/sys/class/drm/card0/gt/gt1/rps_cur_freq_mhz
/sys/class/drm/card0/gt/gt1/rps_act_freq_mhz
gt0 is for GFX and gt1 is for SA Media.
Enhance turbostat to prefer the i915 new sysfs knobs.
Export gt0 via BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz.
Export gt1 via BIC_SMA_mc6/BIC_SMAMHz/BIC_SMAACTMHz.
Justin Ernst [Tue, 2 Apr 2024 17:40:29 +0000 (13:40 -0400)]
tools/power/turbostat: Fix uncore frequency file string
Running turbostat on a 16 socket HPE Scale-up Compute 3200 (SapphireRapids) fails with:
turbostat: /sys/devices/system/cpu/intel_uncore_frequency/package_010_die_00/current_freq_khz: open failed: No such file or directory
We observe the sysfs uncore frequency directories named:
...
package_09_die_00/
package_10_die_00/
package_11_die_00/
...
package_15_die_00/
The culprit is an incorrect sprintf format string "package_0%d_die_0%d" used
with each instance of reading uncore frequency files. uncore-frequency-common.c
creates the sysfs directory with the format "package_%02d_die_%02d". Once the
package value reaches double digits, the formats diverge.
Change each instance of "package_0%d_die_0%d" to "package_%02d_die_%02d".
[lenb: deleted the probe part of this patch, as it was already fixed]
Signed-off-by: Justin Ernst <justin.ernst@hpe.com> Reviewed-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
Zhang Rui [Tue, 12 Mar 2024 06:23:37 +0000 (14:23 +0800)]
tools/power/turbostat: Cache graphics sysfs path
Graphics drivers (i915/Xe) have different sysfs knobs on different
platforms, and it is possible that different sysfs knobs fit into the
same turbostat columns.
Instead of specifying different sysfs knobs every time, detect them
once and cache the path for future use.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Patryk Wlazlyn [Tue, 5 Mar 2024 11:27:27 +0000 (12:27 +0100)]
tools/power turbostat: read RAPL counters via perf
Some of the future Intel platforms will require reading the RAPL
counters via perf and not MSR. On current platforms we can still read
them using both ways.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Merge tag 'drm-fixes-2024-04-09' of https://gitlab.freedesktop.org/drm/kernel
Pull drm nouveau fix from Dave Airlie:
"A previous fix to nouveau devinit on the GSP paths fixed the Turing
but broke Ampere, I did some more digging and found the proper fix.
Sending it early as I want to make sure it makes the next 6.8 stable
kernels to fix the regression.
Regular fixes will be at end of week as usual.
nouveau:
- regression fix for GSP display enable"
* tag 'drm-fixes-2024-04-09' of https://gitlab.freedesktop.org/drm/kernel:
nouveau: fix devinit paths to only handle display on GSP.
fs/proc: Skip bootloader comment if no embedded kernel parameters
If the "bootconfig" kernel command-line argument was specified or if
the kernel was built with CONFIG_BOOT_CONFIG_FORCE, but if there are
no embedded kernel parameter, omit the "# Parameters from bootloader:"
comment from the /proc/bootconfig file. This will cause automation
to fall back to the /proc/cmdline file, which will be identical to the
comment in this no-embedded-kernel-parameters case.
fs/proc: remove redundant comments from /proc/bootconfig
commit 717c7c894d4b ("fs/proc: Add boot loader arguments as comment to
/proc/bootconfig") adds bootloader argument comments into /proc/bootconfig.
/proc/bootconfig shows boot_command_line[] multiple times following
every xbc key value pair, that's duplicated and not necessary.
Remove redundant ones.
Output before and after the fix is like:
key1 = value1
*bootloader argument comments*
key2 = value2
*bootloader argument comments*
key3 = value3
*bootloader argument comments*
...
Merge tag 'nativebhi' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mitigations from Thomas Gleixner:
"Mitigations for the native BHI hardware vulnerabilty:
Branch History Injection (BHI) attacks may allow a malicious
application to influence indirect branch prediction in kernel by
poisoning the branch history. eIBRS isolates indirect branch targets
in ring0. The BHB can still influence the choice of indirect branch
predictor entry, and although branch predictor entries are isolated
between modes when eIBRS is enabled, the BHB itself is not isolated
between modes.
Add mitigations against it either with the help of microcode or with
software sequences for the affected CPUs"
[ This also ends up enabling the full mitigation by default despite the
system call hardening, because apparently there are other indirect
calls that are still sufficiently reachable, and the 'auto' case just
isn't hardened enough.
We'll have some more inevitable tweaking in the future - Linus ]
* tag 'nativebhi' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM: x86: Add BHI_NO
x86/bhi: Mitigate KVM by default
x86/bhi: Add BHI mitigation knob
x86/bhi: Enumerate Branch History Injection (BHI) bug
x86/bhi: Define SPEC_CTRL_BHI_DIS_S
x86/bhi: Add support for clearing branch history at syscall entry
x86/syscall: Don't force use of indirect calls for system calls
x86/bugs: Change commas to semicolons in 'spectre_v2' sysfs file
Merge tag 'for-6.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Several fixes to qgroups that have been recently identified by test
generic/475:
- fix prealloc reserve leak in subvolume operations
- various other fixes in reservation setup, conversion or cleanup"
* tag 'for-6.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: always clear PERTRANS metadata during commit
btrfs: make btrfs_clear_delalloc_extent() free delalloc reserve
btrfs: qgroup: convert PREALLOC to PERTRANS after record_root_in_trans
btrfs: record delayed inode root in transaction
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
btrfs: qgroup: correctly model root qgroup rsv in convert
Daniel Sneddon [Wed, 13 Mar 2024 16:49:17 +0000 (09:49 -0700)]
KVM: x86: Add BHI_NO
Intel processors that aren't vulnerable to BHI will set
MSR_IA32_ARCH_CAPABILITIES[BHI_NO] = 1;. Guests may use this BHI_NO bit to
determine if they need to implement BHI mitigations or not. Allow this bit
to be passed to the guests.
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Pawan Gupta [Mon, 11 Mar 2024 15:57:09 +0000 (08:57 -0700)]
x86/bhi: Mitigate KVM by default
BHI mitigation mode spectre_bhi=auto does not deploy the software
mitigation by default. In a cloud environment, it is a likely scenario
where userspace is trusted but the guests are not trusted. Deploying
system wide mitigation in such cases is not desirable.
Update the auto mode to unconditionally mitigate against malicious
guests. Deploy the software sequence at VMexit in auto mode also, when
hardware mitigation is not available. Unlike the force =on mode,
software sequence is not deployed at syscalls in auto mode.
Pawan Gupta [Mon, 11 Mar 2024 15:57:05 +0000 (08:57 -0700)]
x86/bhi: Add BHI mitigation knob
Branch history clearing software sequences and hardware control
BHI_DIS_S were defined to mitigate Branch History Injection (BHI).
Add cmdline spectre_bhi={on|off|auto} to control BHI mitigation:
auto - Deploy the hardware mitigation BHI_DIS_S, if available.
on - Deploy the hardware mitigation BHI_DIS_S, if available,
otherwise deploy the software sequence at syscall entry and
VMexit.
off - Turn off BHI mitigation.
The default is auto mode which does not deploy the software sequence
mitigation. This is because of the hardening done in the syscall
dispatch path, which is the likely target of BHI.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Daniel Sneddon [Wed, 13 Mar 2024 16:47:57 +0000 (09:47 -0700)]
x86/bhi: Define SPEC_CTRL_BHI_DIS_S
Newer processors supports a hardware control BHI_DIS_S to mitigate
Branch History Injection (BHI). Setting BHI_DIS_S protects the kernel
from userspace BHI attacks without having to manually overwrite the
branch history.
Define MSR_SPEC_CTRL bit BHI_DIS_S and its enumeration CPUID.BHI_CTRL.
Mitigation is enabled later.
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Pawan Gupta [Mon, 11 Mar 2024 15:56:58 +0000 (08:56 -0700)]
x86/bhi: Add support for clearing branch history at syscall entry
Branch History Injection (BHI) attacks may allow a malicious application to
influence indirect branch prediction in kernel by poisoning the branch
history. eIBRS isolates indirect branch targets in ring0. The BHB can
still influence the choice of indirect branch predictor entry, and although
branch predictor entries are isolated between modes when eIBRS is enabled,
the BHB itself is not isolated between modes.
Alder Lake and new processors supports a hardware control BHI_DIS_S to
mitigate BHI. For older processors Intel has released a software sequence
to clear the branch history on parts that don't support BHI_DIS_S. Add
support to execute the software sequence at syscall entry and VMexit to
overwrite the branch history.
For now, branch history is not cleared at interrupt entry, as malicious
applications are not believed to have sufficient control over the
registers, since previous register state is cleared at interrupt
entry. Researchers continue to poke at this area and it may become
necessary to clear at interrupt entry as well in the future.
This mitigation is only defined here. It is enabled later.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Co-developed-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
x86/syscall: Don't force use of indirect calls for system calls
Make <asm/syscall.h> build a switch statement instead, and the compiler can
either decide to generate an indirect jump, or - more likely these days due
to mitigations - just a series of conditional branches.
Yes, the conditional branches also have branch prediction, but the branch
prediction is much more controlled, in that it just causes speculatively
running the wrong system call (harmless), rather than speculatively running
possibly wrong random less controlled code gadgets.
This doesn't mitigate other indirect calls, but the system call indirection
is the first and most easily triggered case.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
x86/bugs: Change commas to semicolons in 'spectre_v2' sysfs file
Change the format of the 'spectre_v2' vulnerabilities sysfs file
slightly by converting the commas to semicolons, so that mitigations for
future variants can be grouped together and separated by commas.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
By default VBDS is set to 0. At boot it is set to clamshell (bit 6 set)
only after method VBDL is executed.
Since VBDL is now evaluated in the probe routine later, after the device
is registered, the retrieved value of VBDS was still 0 ("tablet mode")
when setting up the virtual switch.
Make sure to evaluate VGBS after VBDL, to ensure the
convertible boots in clamshell mode, the expected default.
Fixes: 26173179fae1 ("platform/x86: intel-vbtn: Eval VBDL after registering our notifier") Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240329143206.2977734-3-gwendal@chromium.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
David McFarland [Thu, 4 Apr 2024 11:41:45 +0000 (08:41 -0300)]
platform/x86/intel/hid: Don't wake on 5-button releases
If, for example, the power button is configured to suspend, holding it
and releasing it after the machine has suspended, will wake the machine.
Also on some machines, power button release events are sent during
hibernation, even if the button wasn't used to hibernate the machine.
This causes hibernation to be aborted.
Fixes: 0c4cae1bc00d ("PM: hibernate: Avoid missing wakeup events during hibernation") Signed-off-by: David McFarland <corngood@gmail.com> Tested-by: Enrik Berkhan <Enrik.Berkhan@inka.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/878r1tpd6u.fsf_-_@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Merge tag 'x86-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix MCE timer reinit locking
- Fix/improve CoCo guest random entropy pool init
- Fix SEV-SNP late disable bugs
- Fix false positive objtool build warning
- Fix header dependency bug
- Fix resctrl CPU offlining bug
* tag 'x86-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk
x86/mce: Make sure to grab mce_sysfs_mutex in set_bank()
x86/CPU/AMD: Track SNP host status with cc_platform_*()
x86/cc: Add cc_platform_set/_clear() helpers
x86/kvm/Kconfig: Have KVM_AMD_SEV select ARCH_HAS_CC_PLATFORM
x86/coco: Require seeding RNG with RDRAND on CoCo systems
x86/numa/32: Include missing <asm/pgtable_areas.h>
x86/resctrl: Fix uninitialized memory read when last CPU of domain goes offline
Merge tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Fix various timer bugs:
- Fix a timer migration bug that may result in missed events
- Fix timer migration group hierarchy event updates
- Fix a PowerPC64 build warning
- Fix a handful of DocBook annotation bugs"
* tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Return early on deactivation
timers/migration: Fix ignored event due to missing CPU update
vdso: Use CONFIG_PAGE_SHIFT in vdso/datapage.h
timers: Fix text inconsistencies and spelling
tick/sched: Fix struct tick_sched doc warnings
tick/sched: Fix various kernel-doc warnings
timers: Fix kernel-doc format and add Return values
time/timekeeping: Fix kernel-doc warnings and typos
time/timecounter: Fix inline documentation
Merge tag 'perf-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Ingo Molnar:
"Fix a combined PEBS events bug on x86 Intel CPUs"
* tag 'perf-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Don't clear ->pebs_data_cfg for the last PEBS event
Merge tag 'nfsd-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Address a slow memory leak with RPC-over-TCP
- Prevent another NFS4ERR_DELAY loop during CREATE_SESSION
* tag 'nfsd-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: hold a lighter-weight client reference over CB_RECALL_ANY
SUNRPC: Fix a slow server-side memory leak with RPC-over-TCP
Merge tag '6.9-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- fix to retry close to avoid potential handle leaks when server
returns EBUSY
- DFS fixes including a fix for potential use after free
- fscache fix
- minor strncpy cleanup
- reconnect race fix
- deal with various possible UAF race conditions tearing sessions down
* tag '6.9-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix potential UAF in cifs_signal_cifsd_for_reconnect()
smb: client: fix potential UAF in smb2_is_network_name_deleted()
smb: client: fix potential UAF in is_valid_oplock_break()
smb: client: fix potential UAF in smb2_is_valid_oplock_break()
smb: client: fix potential UAF in smb2_is_valid_lease_break()
smb: client: fix potential UAF in cifs_stats_proc_show()
smb: client: fix potential UAF in cifs_stats_proc_write()
smb: client: fix potential UAF in cifs_dump_full_key()
smb: client: fix potential UAF in cifs_debug_files_proc_show()
smb3: retrying on failed server close
smb: client: serialise cifs_construct_tcon() with cifs_mount_mutex
smb: client: handle DFS tcons in cifs_construct_tcon()
smb: client: refresh referral without acquiring refpath_lock
smb: client: guarantee refcounted children from parent session
cifs: Fix caching to try to do open O_WRONLY as rdwr on server
smb: client: fix UAF in smb2_reconnect_server()
smb: client: replace deprecated strncpy with strscpy
x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk
srso_alias_untrain_ret() is special code, even if it is a dummy
which is called in the !SRSO case, so annotate it like its real
counterpart, to address the following objtool splat:
vmlinux.o: warning: objtool: .export_symbol+0x2b290: data relocation to !ENDBR: srso_alias_untrain_ret+0x0
Merge tag 'firewire-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"The firewire-ohci kernel module has a parameter for verbose kernel
logging. It is well-known that it logs the spurious IRQ for bus-reset
event due to the unmasked register for IRQ event. This update fixes
the issue"
* tag 'firewire-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: ohci: mask bus reset interrupts between ISR and bottom half
Adam Goldman [Sun, 24 Mar 2024 22:38:41 +0000 (07:38 +0900)]
firewire: ohci: mask bus reset interrupts between ISR and bottom half
In the FireWire OHCI interrupt handler, if a bus reset interrupt has
occurred, mask bus reset interrupts until bus_reset_work has serviced and
cleared the interrupt.
Normally, we always leave bus reset interrupts masked. We infer the bus
reset from the self-ID interrupt that happens shortly thereafter. A
scenario where we unmask bus reset interrupts was introduced in 2008 in a007bb857e0b26f5d8b73c2ff90782d9c0972620: If
OHCI_PARAM_DEBUG_BUSRESETS (8) is set in the debug parameter bitmask, we
will unmask bus reset interrupts so we can log them.
irq_handler logs the bus reset interrupt. However, we can't clear the bus
reset event flag in irq_handler, because we won't service the event until
later. irq_handler exits with the event flag still set. If the
corresponding interrupt is still unmasked, the first bus reset will
usually freeze the system due to irq_handler being called again each
time it exits. This freeze can be reproduced by loading firewire_ohci
with "modprobe firewire_ohci debug=-1" (to enable all debugging output).
Apparently there are also some cases where bus_reset_work will get called
soon enough to clear the event, and operation will continue normally.
This freeze was first reported a few months after a007bb85 was committed,
but until now it was never fixed. The debug level could safely be set
to -1 through sysfs after the module was loaded, but this would be
ineffectual in logging bus reset interrupts since they were only
unmasked during initialization.
irq_handler will now leave the event flag set but mask bus reset
interrupts, so irq_handler won't be called again and there will be no
freeze. If OHCI_PARAM_DEBUG_BUSRESETS is enabled, bus_reset_work will
unmask the interrupt after servicing the event, so future interrupts
will be caught as desired.
As a side effect to this change, OHCI_PARAM_DEBUG_BUSRESETS can now be
enabled through sysfs in addition to during initial module loading.
However, when enabled through sysfs, logging of bus reset interrupts will
be effective only starting with the second bus reset, after
bus_reset_work has executed.
Signed-off-by: Adam Goldman <adamg@pobox.com> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Merge tag 'spi-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small driver specific fixes, the most important being the
s3c64xx change which is likely to be hit during normal operation"
* tag 'spi-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: mchp-pci1xxx: Fix a possible null pointer dereference in pci1xxx_spi_probe
spi: spi-fsl-lpspi: remove redundant spi_controller_put call
spi: s3c64xx: Use DMA mode from fifo size
Merge tag 'regmap-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"Richard found a nasty corner case in the maple tree code which he
fixed, and also fixed a compiler warning which was showing up with the
toolchain he uses and helpfully identified a possible incorrect error
code which could have runtime impacts"
* tag 'regmap-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: maple: Fix uninitialized symbol 'ret' warnings
regmap: maple: Fix cache corruption in regcache_maple_drop()
* tag 'block-6.9-20240405' of git://git.kernel.dk/linux:
nvme-fc: rename free_ctrl callback to match name pattern
nvmet-fc: move RCU read lock to nvmet_fc_assoc_exists
nvmet: implement unique discovery NQN
nvme: don't create a multipath node for zero capacity devices
nvme: split nvme_update_zone_info
nvme-multipath: don't inherit LBA-related fields for the multipath node
block: fix overflow in blk_ioctl_discard()
nullblk: Fix cleanup order in null_add_dev() error path
Merge tag 'io_uring-6.9-20240405' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Backport of some fixes that came up during development of the 6.10
io_uring patches. This includes some kbuf cleanups and reference
fixes.
- Disable multishot read if we don't have NOWAIT support on the target
- Fix for a dependency issue with workqueue flushing
* tag 'io_uring-6.9-20240405' of git://git.kernel.dk/linux:
io_uring/kbuf: hold io_buffer_list reference over mmap
io_uring/kbuf: protect io_buffer_list teardown with a reference
io_uring/kbuf: get rid of bl->is_ready
io_uring/kbuf: get rid of lower BGID lists
io_uring: use private workqueue for exit work
io_uring: disable io-wq execution of multishot NOWAIT requests
io_uring/rw: don't allow multishot reads without NOWAIT support
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The most important is the libsas fix, which is a problem for DMA to a
kmalloc'd structure too small causing cache line interference. The
other fixes (all in drivers) are mostly for allocation length fixes,
error leg unwinding, suspend races and a missing retry"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix MCQ mode dev command timeout
scsi: libsas: Align SMP request allocation to ARCH_DMA_MINALIGN
scsi: sd: Unregister device if device_add_disk() failed in sd_probe()
scsi: ufs: core: WLUN suspend dev/link state error recovery
scsi: mylex: Fix sysfs buffer lengths
Merge tag 'mm-hotfixes-stable-2024-04-05-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"8 hotfixes, 3 are cc:stable
There are a couple of fixups for this cycle's vmalloc changes and one
for the stackdepot changes. And a fix for a very old x86 PAT issue
which can cause a warning splat"
* tag 'mm-hotfixes-stable-2024-04-05-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
stackdepot: rename pool_index to pool_index_plus_1
x86/mm/pat: fix VM_PAT handling in COW mappings
MAINTAINERS: change vmware.com addresses to broadcom.com
selftests/mm: include strings.h for ffsl
mm: vmalloc: fix lockdep warning
mm: vmalloc: bail out early in find_vmap_area() if vmap is not init
init: open output files from cpio unpacking with O_LARGEFILE
mm/secretmem: fix GUP-fast succeeding on secretmem folios
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"arm64/ptrace fix to use the correct SVE layout based on the saved
floating point state rather than the TIF_SVE flag. The latter may be
left on during syscalls even if the SVE state is discarded"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/ptrace: Use saved floating point state type to determine SVE layout
Merge tag 'riscv-for-linus-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for an __{get,put}_kernel_nofault to avoid an uninitialized
value causing spurious failures
- compat_vdso.so.dbg is now installed to the standard install location
- A fix to avoid initializing PERF_SAMPLE_BRANCH_*-related events, as
they aren't supported and will just later fail
- A fix to make AT_VECTOR_SIZE_ARCH correct now that we're providing
AT_MINSIGSTKSZ
- pgprot_nx() is now implemented, which fixes vmap W^X protection
- A fix for the vector save/restore code, which at least manifests as
corrupted vector state when a signal is taken
- A fix for a race condition in instruction patching
- A fix to avoid leaking the kernel-mode GP to userspace, which is a
kernel pointer leak that can be used to defeat KASLR in various ways
- A handful of smaller fixes to build warnings, an overzealous printk,
and some missing tracing annotations
* tag 'riscv-for-linus-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: process: Fix kernel gp leakage
riscv: Disable preemption when using patch_map()
riscv: Fix warning by declaring arch_cpu_idle() as noinstr
riscv: use KERN_INFO in do_trap
riscv: Fix vector state restore in rt_sigreturn()
riscv: mm: implement pgprot_nx
riscv: compat_vdso: align VDSOAS build log
RISC-V: Update AT_VECTOR_SIZE_ARCH for new AT_MINSIGSTKSZ
riscv: Mark __se_sys_* functions __used
drivers/perf: riscv: Disable PERF_SAMPLE_BRANCH_* while not supported
riscv: compat_vdso: install compat_vdso.so.dbg to /lib/modules/*/vdso/
riscv: hwprobe: do not produce frtace relocation
riscv: Fix spurious errors from __get/put_kernel_nofault
riscv: mm: Fix prototype to avoid discarding const
Merge tag 's390-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix missing NULL pointer check when determining guest/host fault
- Mark all functions in asm/atomic_ops.h, asm/atomic.h and
asm/preempt.h as __always_inline to avoid unwanted instrumentation
- Fix removal of a Processor Activity Instrumentation (PAI) sampling
event in PMU device driver
- Align system call table on 8 bytes
* tag 's390-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/entry: align system call table on 8 bytes
s390/pai: fix sampling event removal for PMU device driver
s390/preempt: mark all functions __always_inline
s390/atomic: mark all functions __always_inline
s390/mm: fix NULL pointer dereference
Merge tag 'pm-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a recent Energy Model change that went against a recent scheduler
change made independently (Vincent Guittot)"
* tag 'pm-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: EM: fix wrong utilization estimation in em_cpu_energy()
Merge tag 'thermal-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix two power allocator thermal governor issues and an ACPI
thermal driver regression that all were introduced during the 6.8
development cycle.
Specifics:
- Allow the power allocator thermal governor to bind to a thermal
zone without cooling devices and/or without trip points (Nikita
Travkin)
- Make the ACPI thermal driver register a tripless thermal zone when
it cannot find any usable trip points instead of returning an error
from acpi_thermal_add() (Stephen Horvath)"
* tag 'thermal-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: gov_power_allocator: Allow binding without trip points
thermal: gov_power_allocator: Allow binding without cooling devices
ACPI: thermal: Register thermal zones without valid trip points
Merge tag 'gpio-fixes-for-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- make sure GPIO devices are registered with the subsystem before
trying to return them to a caller of gpio_device_find()
- fix two issues with incorrect sanitization of the interrupt labels
* tag 'gpio-fixes-for-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: cdev: fix missed label sanitizing in debounce_setup()
gpio: cdev: check for NULL labels when sanitizing them for irqs
gpiolib: Fix triggering "kobject: 'gpiochipX' is not initialized, yet" kobject_get() errors
Merge tag 'ata-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Compilation warning fixes from Arnd: one in the sata_sx4 driver due
to an incorrect calculation of the parameters passed to memcpy() and
another one in the sata_mv driver when CONFIG_PCI is not set
- Drop the owner driver field assignment in the pata_macio driver. That
is not needed as the PCI core code does that already (Krzysztof)
- Remove an unusued field in struct st_ahci_drv_data of the ahci_st
driver (Christophe)
- Add a missing clock probe error check in the sata_gemini driver
(Chen)
* tag 'ata-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: sata_gemini: Check clk_enable() result
ata: sata_mv: Fix PCI device ID table declaration compilation warning
ata: ahci_st: Remove an unused field in struct st_ahci_drv_data
ata: pata_macio: drop driver owner assignment
ata: sata_sx4: fix pdc20621_get_from_dimm() on 64-bit
Merge tag 'sound-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became a bit bigger collection of patches, but almost all are
about device-specific fixes, and should be safe for 6.9:
- Lots of ASoC Intel SOF-related fixes/updates
- Locking fixes in SoundWire drivers
- ASoC AMD ACP/SOF updates
- ASoC ES8326 codec fixes
- HD-audio codec fixes and quirks
- A regression fix in emu10k1 synth code"
* tag 'sound-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (49 commits)
ASoC: SOF: Core: Add remove_late() to sof_init_environment failure path
ASoC: SOF: amd: fix for false dsp interrupts
ASoC: SOF: Intel: lnl: Disable DMIC/SSP offload on remove
ASoC: Intel: avs: boards: Add modules description
ASoC: codecs: ES8326: Removing the control of ADC_SCALE
ASoC: codecs: ES8326: Solve a headphone detection issue after suspend and resume
ASoC: codecs: ES8326: modify clock table
ASoC: codecs: ES8326: Solve error interruption issue
ALSA: line6: Zero-initialize message buffers
ALSA: hda/realtek: cs35l41: Support ASUS ROG G634JYR
ALSA: hda/realtek: Update Panasonic CF-SZ6 quirk to support headset with microphone
ALSA: hda/realtek: Add sound quirks for Lenovo Legion slim 7 16ARHA7 models
Revert "ALSA: emu10k1: fix synthesizer sample playback position and caching"
OSS: dmasound/paula: Mark driver struct with __refdata to prevent section mismatch
ALSA: hda/realtek: Add quirks for ASUS Laptops using CS35L56
ASoC: amd: acp: fix for acp_init function error handling
ASoC: tas2781: mark dvc_tlv with __maybe_unused
ASoC: ops: Fix wraparound for mask in snd_soc_get_volsw
ASoC: rt-sdw*: add __func__ to all error logs
ASoC: rt722-sdca-sdw: fix locking sequence
...
Merge tag 'drm-fixes-2024-04-05' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes, mostly xe and i915, amdgpu on a week off, otherwise a
nouveau fix for a crash with new vulkan cts tests, and a couple of
cleanups and misc fixes.
display:
- fix typos in kerneldoc
prime:
- unbreak dma-buf export for virt-gpu
nouveau:
- uvmm: fix remap address calculation
- minor cleanups
panfrost:
- fix power-transition timeouts
xe:
- Stop using system_unbound_wq for preempt fences
- Fix saving unordered rebinding fences by attaching them as kernel
feces to the vm's resv
- Fix TLB invalidation fences completing out of order
- Move rebind TLB invalidation to the ring ops to reduce the latency
i915:
- A few DisplayPort related fixes
- eDP PSR fixes
- Remove some VM space restrictions on older platforms
- Disable automatic load CCS load balancing"
* tag 'drm-fixes-2024-04-05' of https://gitlab.freedesktop.org/drm/kernel: (22 commits)
drm/xe: Use ordered wq for preempt fence waiting
drm/xe: Move vma rebinding to the drm_exec locking loop
drm/xe: Make TLB invalidation fences unordered
drm/xe: Rework rebinding
drm/xe: Use ring ops TLB invalidation for rebinds
drm/i915/mst: Reject FEC+MST on ICL
drm/i915/mst: Limit MST+DSC to TGL+
drm/i915/dp: Fix the computation for compressed_bpp for DISPLAY < 13
drm/i915/gt: Enable only one CCS for compute workload
drm/i915/gt: Do not generate the command streamer for all the CCS
drm/i915/gt: Disable HW load balancing for CCS
drm/i915/gt: Limit the reserved VM space to only the platforms that need it
drm/i915/psr: Fix intel_psr2_sel_fetch_et_alignment usage
drm/i915/psr: Move writing early transport pipe src
drm/i915/psr: Calculate PIPE_SRCSZ_ERLY_TPT value
drm/i915/dp: Remove support for UHBR13.5
drm/i915/dp: Fix DSC state HW readout for SST connectors
drm/display: fix typo
drm/prime: Unbreak virtgpu dma-buf export
nouveau/uvmm: fix addr/range calcs for remap operations
...
stackdepot: rename pool_index to pool_index_plus_1
Commit 3ee34eabac2a ("lib/stackdepot: fix first entry having a 0-handle")
changed the meaning of the pool_index field to mean "the pool index plus
1". This made the code accessing this field less self-documenting, as
well as causing debuggers such as drgn to not be able to easily remain
compatible with both old and new kernels, because they typically do that
by testing for presence of the new field. Because stackdepot is a
debugging tool, we should make sure that it is debugger friendly.
Therefore, give the field a different name to improve readability as well
as enabling debugger backwards compatibility.
This is needed in 6.9, which would otherwise become an odd release with
the new semantics and old name so debuggers wouldn't recognize the new
semantics there.
Fixes: 3ee34eabac2a ("lib/stackdepot: fix first entry having a 0-handle") Link: https://lkml.kernel.org/r/20240402001500.53533-1-pcc@google.com Link: https://linux-review.googlesource.com/id/Ib3e70c36c1d230dd0a118dc22649b33e768b9f88 Signed-off-by: Peter Collingbourne <pcc@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Alexander Potapenko <glider@google.com> Acked-by: Marco Elver <elver@google.com> Acked-by: Oscar Salvador <osalvador@suse.de> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Omar Sandoval <osandov@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
PAT handling won't do the right thing in COW mappings: the first PTE (or,
in fact, all PTEs) can be replaced during write faults to point at anon
folios. Reliably recovering the correct PFN and cachemode using
follow_phys() from PTEs will not work in COW mappings.
Using follow_phys(), we might just get the address+protection of the anon
folio (which is very wrong), or fail on swap/nonswap entries, failing
follow_phys() and triggering a WARN_ON_ONCE() in untrack_pfn() and
track_pfn_copy(), not properly calling free_pfn_range().
In free_pfn_range(), we either wouldn't call memtype_free() or would call
it with the wrong range, possibly leaking memory.
To fix that, let's update follow_phys() to refuse returning anon folios,
and fallback to using the stored PFN inside vma->vm_pgoff for COW mappings
if we run into that.
We will now properly handle untrack_pfn() with COW mappings, where we
don't need the cachemode. We'll have to fail fork()->track_pfn_copy() if
the first page was replaced by an anon folio, though: we'd have to store
the cachemode in the VMA to make this work, likely growing the VMA size.
For now, lets keep it simple and let track_pfn_copy() just fail in that
case: it would have failed in the past with swap/nonswap entries already,
and it would have done the wrong thing with anon folios.
Simple reproducer to trigger the WARN_ON_ONCE() in untrack_pfn():
Link: https://lkml.kernel.org/r/20240403212131.929421-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Wupeng Ma <mawupeng1@huawei.com> Closes: https://lkml.kernel.org/r/20240227122814.3781907-1-mawupeng1@huawei.com Fixes: b1a86e15dc03 ("x86, pat: remove the dependency on 'vm_pgoff' in track/untrack pfn vma routines") Fixes: 5899329b1910 ("x86: PAT: implement track/untrack of pfnmap regions for x86 - v3") Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
indeed it can happen if the find_vmap_area_exceed_addr_lock() gets called
concurrently because it tries to acquire two nodes locks. It was done to
prevent removing a lowest VA found on a previous step.
To address this a lowest VA is found first without holding a node lock
where it resides. As a last step we check if a VA still there because it
can go away, if removed, proceed with next lowest.
[akpm@linux-foundation.org: fix comment typos, per Baoquan] Link: https://lkml.kernel.org/r/20240328140330.4747-1-urezki@gmail.com Fixes: 53becf32aec1 ("mm: vmalloc: support multiple nodes in vread_iter") Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Tested-by: Jens Axboe <axboe@kernel.dk> Tested-by: Omar Sandoval <osandov@fb.com> Reported-by: Jens Axboe <axboe@kernel.dk> Cc: Baoquan He <bhe@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sony.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Some background. It worked before because the lock that is in question
was statically defined and initialized. As of now, the locks and data
structures are initialized in the vmalloc_init() function.
To address that issue add the check whether the "vmap_initialized"
variable is set, if not find_vmap_area() bails out on entry returning NULL.
Link: https://lkml.kernel.org/r/20240323141544.4150-1-urezki@gmail.com Fixes: 72210662c5a2 ("mm: vmalloc: offload free_vmap_area_lock lock") Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Baoquan He <bhe@redhat.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sony.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
John Sperbeck [Sat, 23 Mar 2024 15:29:34 +0000 (08:29 -0700)]
init: open output files from cpio unpacking with O_LARGEFILE
If a member of a cpio archive for an initrd or initrams is larger than
2Gb, we'll eventually fail to write to that file when we get to that
limit, unless O_LARGEFILE is set.
The problem can be seen with this recipe, assuming that BLK_DEV_RAM
is not configured:
The console will show 'Initramfs unpacking failed: write error'. With
the patch, the error is gone.
Link: https://lkml.kernel.org/r/20240323152934.3307391-1-jsperbeck@google.com Signed-off-by: John Sperbeck <jsperbeck@google.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/secretmem: fix GUP-fast succeeding on secretmem folios
folio_is_secretmem() currently relies on secretmem folios being LRU
folios, to save some cycles.
However, folios might reside in a folio batch without the LRU flag set, or
temporarily have their LRU flag cleared. Consequently, the LRU flag is
unreliable for this purpose.
In particular, this is the case when secretmem_fault() allocates a fresh
page and calls filemap_add_folio()->folio_add_lru(). The folio might be
added to the per-cpu folio batch and won't get the LRU flag set until the
batch was drained using e.g., lru_add_drain().
Consequently, folio_is_secretmem() might not detect secretmem folios and
GUP-fast can succeed in grabbing a secretmem folio, crashing the kernel
when we would later try reading/writing to the folio, because the folio
has been unmapped from the directmap.
Fix it by removing that unreliable check.
Link: https://lkml.kernel.org/r/20240326143210.291116-2-david@redhat.com Fixes: 1507f51255c9 ("mm: introduce memfd_secret system call to create "secret" memory areas") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: xingwei lee <xrivendell7@gmail.com> Reported-by: yue sun <samsun1006219@gmail.com> Closes: https://lore.kernel.org/lkml/CABOYnLyevJeravW=QrH0JUPYEcDN160aZFb7kwndm-J2rmz0HQ@mail.gmail.com/ Debugged-by: Miklos Szeredi <miklos@szeredi.hu> Tested-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jeff Layton [Fri, 5 Apr 2024 17:56:18 +0000 (13:56 -0400)]
nfsd: hold a lighter-weight client reference over CB_RECALL_ANY
Currently the CB_RECALL_ANY job takes a cl_rpc_users reference to the
client. While a callback job is technically an RPC that counter is
really more for client-driven RPCs, and this has the effect of
preventing the client from being unhashed until the callback completes.
If nfsd decides to send a CB_RECALL_ANY just as the client reboots, we
can end up in a situation where the callback can't complete on the (now
dead) callback channel, but the new client can't connect because the old
client can't be unhashed. This usually manifests as a NFS4ERR_DELAY
return on the CREATE_SESSION operation.
The job is only holding a reference to the client so it can clear a flag
after the RPC completes. Fix this by having CB_RECALL_ANY instead hold a
reference to the cl_nfsdfs.cl_ref. Typically we only take that sort of
reference when dealing with the nfsdfs info files, but it should work
appropriately here to ensure that the nfs4_client doesn't disappear.
Fixes: 44df6f439a17 ("NFSD: add delegation reaper to react to low memory condition") Reported-by: Vladimir Benes <vbenes@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Merge tag '9p-for-6.9-rc3' of https://github.com/martinetd/linux
Pull minor 9p cleanups from Dominique Martinet:
- kernel doc fix & removal of unused flag
- fix some bogus debug statement for read/write
* tag '9p-for-6.9-rc3' of https://github.com/martinetd/linux:
9p: remove SLAB_MEM_SPREAD flag usage
9p: Fix read/write debug statements to report server reply
9p/trans_fd: remove Excess kernel-doc comment
Merge tag '6.9-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"Three fixes, all also for stable:
- encryption fix
- memory overrun fix
- oplock break fix"
* tag '6.9-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: do not set SMB2_GLOBAL_CAP_ENCRYPTION for SMB 3.1.1
ksmbd: validate payload size in ipc response
ksmbd: don't send oplock break if rename fails
Merge tag 'vfs-6.9-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains a few small fixes. This comes with some delay because I
wanted to wait on people running their reproducers and the Easter
Holidays meant that those replies came in a little later than usual:
- Fix handling of preventing writes to mounted block devices.
Since last kernel we allow to prevent writing to mounted block
devices provided CONFIG_BLK_DEV_WRITE_MOUNTED isn't set and the
block device is opened with restricted writes. When we switched to
opening block devices as files we altered the mechanism by which we
recognize when a block device has been opened with write
restrictions.
The detection logic assumed that only read-write mounted
filesystems would apply write restrictions to their block devices
from other openers. That of course is not true since it also makes
sense to apply write restrictions for filesystems that are
read-only.
Fix the detection logic using an FMODE_* bit. We still have a few
left since we freed up a couple a while ago. I also picked up a
patch to free up four additional FMODE_* bits scheduled for the
next merge window.
- Fix counting the number of writers to a block device. This just
changes the logic to be consistent.
- Fix a bug in aio causing a NULL pointer derefernce after we
implemented batched processing in aio.
- Finally, add the changes we discussed that allows to yield block
devices early even though file closing itself is deferred.
This also allows us to remove two holder operations to get and
release the holder to align lifetime of file and holder of the
block device"
* tag 'vfs-6.9-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
aio: Fix null ptr deref in aio_complete() wakeup
fs,block: yield devices early
block: count BLK_OPEN_RESTRICT_WRITES openers
block: handle BLK_OPEN_RESTRICT_WRITES correctly
Kent Overstreet [Sun, 31 Mar 2024 21:52:12 +0000 (17:52 -0400)]
aio: Fix null ptr deref in aio_complete() wakeup
list_del_init_careful() needs to be the last access to the wait queue
entry - it effectively unlocks access.
Previously, finish_wait() would see the empty list head and skip taking
the lock, and then we'd return - but the completion path would still
attempt to do the wakeup after the task_struct pointer had been
overwritten.
Commit 4b6f4c5a67c0 ("timer/migration: Remove buggy early return on
deactivation") removed the logic to return early in tmigr_update_events()
on deactivation. With this the problem with a not properly updated first
global event in a hierarchy containing only a single group was fixed.
But when having a look at this code path with a hierarchy with more than a
single level, now unnecessary work is done (example is partially copied
from the message of the commit mentioned above):
0) CPU 0 is active thus its event is ignored (the letter 'i') and so are
upper levels' events. CPU 1 is idle and has the timer T1 enqueued.
CPU 2 also has a timer. The expiry order is T0 (ignored) < T1 < T2
1) CPU 0 goes idle without global event queued. Therefore KTIME_MAX is
pushed as its next expiry and its own event kept as "ignore". Without this
early return the following steps happen in tmigr_update_events() when
child = null and group = GRP0:0 :
2) The change now propagates up to the top. Then tmigr_update_events()
updates the group event of GRP0:0 and executes the following steps
(child = GRP0:0 and group = GRP0:0):
lock(GRP0:0->lock);
lock(GRP1:0->lock);
evt = tmigr_next_groupevt(GRP0:0); -> this removes the ignored events
in GRP0:0
... update GRP1:0 group event and timerqueue ...
unlock(GRP1:0->lock);
unlock(GRP0:0->lock);
So the dance in 1) with locking the GRP0:0->lock and removing the T0i from
the timerqueue is redundand as this is done nevertheless in 2) when
tmigr_next_groupevt(GRP0:0) is executed.
Revert commit 4b6f4c5a67c0 ("timer/migration: Remove buggy early return on
deactivation") and add a condition into return path to skip the return
only, when hierarchy contains a single group. Adapt comments accordingly.
Fixes: 4b6f4c5a67c0 ("timer/migration: Remove buggy early return on deactivation") Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/87cyr49on2.fsf@somnus
timers/migration: Fix ignored event due to missing CPU update
When a group event is updated with its expiry unchanged but a different
CPU, that target change may go unnoticed and the event may be propagated
up with a stale CPU value. The following depicts a scenario that has
been actually observed:
0) The hierarchy has 3 levels. The left part (GRP1:0) is all idle,
including CPU 0 and CPU 1 which have a timer each: T0 and T1. They have
the same expiry value.
2) The migrator in GRP1:1 fetches the next timer for CPU 0 and finds
none. But it updates the events from its groups, starting with GRP0:0
which now has T1 as its next event. So far so good.
3) The migrator in GRP1:1 proceeds upward and updates the events in
GRP1:0. The child event TGRP0:0 is found queued with the same expiry
as before. And therefore it is left unchanged. However the target CPU
is not the same but that fact is ignored so TGRP0:0 still points to
CPU 0 when it should point to CPU 1.
4) The propagation has reached the top level and TGRP1:0, having TGRP0:0
as its first event, also wrongly points to CPU 0. TGRP1:0 is added to
the top level group.
5) The migrator in GRP1:1 dequeues the next event in top level pointing
to CPU 0. But since it actually doesn't see any real event in CPU 0, it
early returns.
6) T1 is left unhandled until either CPU 0 or CPU 1 wake up.
Some other bad scenario may involve trees with just two levels.
Fix this with unconditionally updating the CPU of the child event before
considering to early return while updating a queued event with an
unchanged expiry value.
Merge tag 'asoc-fix-v6.9-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.9
A relatively large set of fixes here, the biggest piece of it is a
series correcting some problems with the delay reporting for Intel SOF
cards but there's a bunch of other things. Everything here is driver
specific except for a fix in the core for an issue with sign extension
handling volume controls.
Dave Airlie [Fri, 5 Apr 2024 02:25:28 +0000 (12:25 +1000)]
Merge tag 'drm-xe-fixes-2024-04-04' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Stop using system_unbound_wq for preempt fences,
as this can cause starvation when reaching more
than max_active defined by workqueue
- Fix saving unordered rebinding fences by attaching
them as kernel feces to the vm's resv
- Fix TLB invalidation fences completing out of order
- Move rebind TLB invalidation to the ring ops to reduce
the latency
x86/cpufeatures: Add CPUID_LNX_5 to track recently added Linux-defined word
Add CPUID_LNX_5 to track cpufeatures' word 21, and add the appropriate
compile-time assert in KVM to prevent direct lookups on the features in
CPUID_LNX_5. KVM uses X86_FEATURE_* flags to manage guest CPUID, and so
must translate features that are scattered by Linux from the Linux-defined
bit to the hardware-defined bit, i.e. should never try to directly access
scattered features in guest CPUID.
Opportunistically add NR_CPUID_WORDS to enum cpuid_leafs, along with a
compile-time assert in KVM's CPUID infrastructure to ensure that future
additions update cpuid_leafs along with NCAPINTS.
No functional change intended.
Fixes: 7f274e609f3d ("x86/cpufeatures: Add new word for scattered features") Cc: Sandipan Das <sandipan.das@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'net-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bluetooth and bpf.
Fairly usual collection of driver and core fixes. The large selftest
accompanying one of the fixes is also becoming a common occurrence.
Current release - regressions:
- ipv6: fix infinite recursion in fib6_dump_done()
- net/rds: fix possible null-deref in newly added error path
Current release - new code bugs:
- net: do not consume a full cacheline for system_page_pool
- bpf: fix bpf_arena-related file descriptor leaks in the verifier
- drv: ice: fix freeing uninitialized pointers, fixing misuse of the
newfangled __free() auto-cleanup
Previous releases - regressions:
- x86/bpf: fixes the BPF JIT with retbleed=stuff
- xen-netfront: add missing skb_mark_for_recycle, fix page pool
accounting leaks, revealed by recently added explicit warning
- tcp: fix bind() regression for v6-only wildcard and v4-mapped-v6
non-wildcard addresses
- Bluetooth:
- replace "hci_qca: Set BDA quirk bit if fwnode exists in DT" with
better workarounds to un-break some buggy Qualcomm devices
- set conn encrypted before conn establishes, fix re-connecting to
some headsets which use slightly unusual sequence of msgs
- mptcp:
- prevent BPF accessing lowat from a subflow socket
- don't account accept() of non-MPC client as fallback to TCP
- drv: mana: fix Rx DMA datasize and skb_over_panic
- drv: i40e: fix VF MAC filter removal
Previous releases - always broken:
- gro: various fixes related to UDP tunnels - netns crossing
problems, incorrect checksum conversions, and incorrect packet
transformations which may lead to panics
- bpf: support deferring bpf_link dealloc to after RCU grace period
- nf_tables:
- release batch on table validation from abort path
- release mutex after nft_gc_seq_end from abort path
- flush pending destroy work before exit_net release
- drv: r8169: skip DASH fw status checks when DASH is disabled"
* tag 'net-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
netfilter: validate user input for expected length
net/sched: act_skbmod: prevent kernel-infoleak
net: usb: ax88179_178a: avoid the interface always configured as random address
net: dsa: sja1105: Fix parameters order in sja1110_pcs_mdio_write_c45()
net: ravb: Always update error counters
net: ravb: Always process TX descriptor ring
netfilter: nf_tables: discard table flag update with pending basechain deletion
netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()
netfilter: nf_tables: reject new basechain after table flag update
netfilter: nf_tables: flush pending destroy work before exit_net release
netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path
netfilter: nf_tables: release batch on table validation from abort path
Revert "tg3: Remove residual error handling in tg3_suspend"
tg3: Remove residual error handling in tg3_suspend
net: mana: Fix Rx DMA datasize and skb_over_panic
net/sched: fix lockdep splat in qdisc_tree_reduce_backlog()
net: phy: micrel: lan8814: Fix when enabling/disabling 1-step timestamping
net: stmmac: fix rx queue priority assignment
net: txgbe: fix i2c dev name cannot match clkdev
net: fec: Set mac_managed_pm during probe
...
Merge tag 'bcachefs-2024-04-03' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs repair code from Kent Overstreet:
"A couple more small fixes, and new repair code.
We can now automatically recover from arbitrary corrupted interior
btree nodes by scanning, and we can reconstruct metadata as needed to
bring a filesystem back into a working, consistent, read-write state
and preserve access to whatevver wasn't corrupted.
Meaning - you can blow away all metadata except for extents and
dirents leaf nodes, and repair will reconstruct everything else and
give you your data, and under the correct paths. If inodes are missing
i_size will be slightly off and permissions/ownership/timestamps will
be gone, and we do still need the snapshots btree if snapshots were in
use - in the future we'll be able to guess the snapshot tree structure
in some situations.
IOW - aside from shaking out remaining bugs (fuzz testing is still
coming), repair code should be complete and if repair ever doesn't
work that's the highest priority bug that I want to know about
immediately.
This patchset was kindly tested by a user from India who accidentally
wiped one drive out of a three drive filesystem with no replication on
the family computer - it took a couple weeks but we got everything
important back"
* tag 'bcachefs-2024-04-03' of https://evilpiepirate.org/git/bcachefs:
bcachefs: reconstruct_inode()
bcachefs: Subvolume reconstruction
bcachefs: Check for extents that point to same space
bcachefs: Reconstruct missing snapshot nodes
bcachefs: Flag btrees with missing data
bcachefs: Topology repair now uses nodes found by scanning to fill holes
bcachefs: Repair pass for scanning for btree nodes
bcachefs: Don't skip fake btree roots in fsck
bcachefs: bch2_btree_root_alloc() -> bch2_btree_root_alloc_fake()
bcachefs: Etyzinger cleanups
bcachefs: bch2_shoot_down_journal_keys()
bcachefs: Clear recovery_passes_required as they complete without errors
bcachefs: ratelimit informational fsck errors
bcachefs: Check for bad needs_discard before doing discard
bcachefs: Improve bch2_btree_update_to_text()
mean_and_variance: Drop always failing tests
bcachefs: fix nocow lock deadlock
bcachefs: BCH_WATERMARK_interior_updates
bcachefs: Fix btree node reserve
Stefan O'Rear [Wed, 27 Mar 2024 06:12:58 +0000 (02:12 -0400)]
riscv: process: Fix kernel gp leakage
childregs represents the registers which are active for the new thread
in user context. For a kernel thread, childregs->gp is never used since
the kernel gp is not touched by switch_to. For a user mode helper, the
gp value can be observed in user space after execve or possibly by other
means.
[From the email thread]
The /* Kernel thread */ comment is somewhat inaccurate in that it is also used
for user_mode_helper threads, which exec a user process, e.g. /sbin/init or
when /proc/sys/kernel/core_pattern is a pipe. Such threads do not have
PF_KTHREAD set and are valid targets for ptrace etc. even before they exec.
childregs is the *user* context during syscall execution and it is observable
from userspace in at least five ways:
1. kernel_execve does not currently clear integer registers, so the starting
register state for PID 1 and other user processes started by the kernel has
sp = user stack, gp = kernel __global_pointer$, all other integer registers
zeroed by the memset in the patch comment.
This is a bug in its own right, but I'm unwilling to bet that it is the only
way to exploit the issue addressed by this patch.
2. ptrace(PTRACE_GETREGSET): you can PTRACE_ATTACH to a user_mode_helper thread
before it execs, but ptrace requires SIGSTOP to be delivered which can only
happen at user/kernel boundaries.
3. /proc/*/task/*/syscall: this is perfectly happy to read pt_regs for
user_mode_helpers before the exec completes, but gp is not one of the
registers it returns.
4. PERF_SAMPLE_REGS_USER: LOCKDOWN_PERF normally prevents access to kernel
addresses via PERF_SAMPLE_REGS_INTR, but due to this bug kernel addresses
are also exposed via PERF_SAMPLE_REGS_USER which is permitted under
LOCKDOWN_PERF. I have not attempted to write exploit code.
5. Much of the tracing infrastructure allows access to user registers. I have
not attempted to determine which forms of tracing allow access to user
registers without already allowing access to kernel registers.
Alexandre Ghiti [Tue, 26 Mar 2024 20:30:17 +0000 (21:30 +0100)]
riscv: Disable preemption when using patch_map()
patch_map() uses fixmap mappings to circumvent the non-writability of
the kernel text mapping.
The __set_fixmap() function only flushes the current cpu tlb, it does
not emit an IPI so we must make sure that while we use a fixmap mapping,
the current task is not migrated on another cpu which could miss the
newly introduced fixmap mapping.
So in order to avoid any task migration, disable the preemption.
Reported-by: Andrea Parri <andrea@rivosinc.com> Closes: https://lore.kernel.org/all/ZcS+GAaM25LXsBOl@andrea/ Reported-by: Andy Chiu <andy.chiu@sifive.com> Closes: https://lore.kernel.org/linux-riscv/CABgGipUMz3Sffu-CkmeUB1dKVwVQ73+7=sgC45-m0AE9RCjOZg@mail.gmail.com/ Fixes: cad539baa48f ("riscv: implement a memset like function for text") Fixes: 0ff7c3b33127 ("riscv: Use text_mutex instead of patch_lock") Co-developed-by: Andy Chiu <andy.chiu@sifive.com> Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Acked-by: Puranjay Mohan <puranjay12@gmail.com> Link: https://lore.kernel.org/r/20240326203017.310422-3-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* tag 'nvme-6.9-2024-04-04' of git://git.infradead.org/nvme:
nvme-fc: rename free_ctrl callback to match name pattern
nvmet-fc: move RCU read lock to nvmet_fc_assoc_exists
nvmet: implement unique discovery NQN
nvme: don't create a multipath node for zero capacity devices
nvme: split nvme_update_zone_info
nvme-multipath: don't inherit LBA-related fields for the multipath node
ASoC: SOF: Core: Add remove_late() to sof_init_environment failure path
In cases where the sof driver is unable to find the firmware and/or
topology file [1], it exits without releasing the i915 runtime
pm wakeref [2]. This results in dmesg warnings[3] during
suspend/resume or driver unbind. Add remove_late() to the failure path
of sof_init_environment so that i915 wakeref is released appropriately
[1]
[ 8.990366] sof-audio-pci-intel-mtl 0000:00:1f.3: SOF firmware and/or topology file not found.
[ 8.990396] sof-audio-pci-intel-mtl 0000:00:1f.3: Supported default profiles
[ 8.990398] sof-audio-pci-intel-mtl 0000:00:1f.3: - ipc type 1 (Requested):
[ 8.990399] sof-audio-pci-intel-mtl 0000:00:1f.3: Firmware file: intel/sof-ipc4/mtl/sof-mtl.ri
[ 8.990401] sof-audio-pci-intel-mtl 0000:00:1f.3: Topology file: intel/sof-ace-tplg/sof-mtl-rt711-2ch.tplg
[ 8.990402] sof-audio-pci-intel-mtl 0000:00:1f.3: Check if you have 'sof-firmware' package installed.
[ 8.990403] sof-audio-pci-intel-mtl 0000:00:1f.3: Optionally it can be manually downloaded from:
[ 8.990404] sof-audio-pci-intel-mtl 0000:00:1f.3: https://github.com/thesofproject/sof-bin/
[ 8.999088] sof-audio-pci-intel-mtl 0000:00:1f.3: error: sof_probe_work failed err: -2
Jakub Kicinski [Thu, 4 Apr 2024 18:37:39 +0000 (11:37 -0700)]
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-04-04
We've added 7 non-merge commits during the last 5 day(s) which contain
a total of 9 files changed, 75 insertions(+), 24 deletions(-).
The main changes are:
1) Fix x86 BPF JIT under retbleed=stuff which causes kernel panics due to
incorrect destination IP calculation and incorrect IP for relocations,
from Uros Bizjak and Joan Bruguera Micó.
2) Fix BPF arena file descriptor leaks in the verifier,
from Anton Protopopov.
3) Defer bpf_link deallocation to after RCU grace period as currently
running multi-{kprobes,uprobes} programs might still access cookie
information from the link, from Andrii Nakryiko.
4) Fix a BPF sockmap lock inversion deadlock in map_delete_elem reported
by syzkaller, from Jakub Sitnicki.
5) Fix resolve_btfids build with musl libc due to missing linux/types.h
include, from Natanael Copa.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Prevent lock inversion deadlock in map delete elem
x86/bpf: Fix IP for relocating call depth accounting
x86/bpf: Fix IP after emitting call depth accounting
bpf: fix possible file descriptor leaks in verifier
tools/resolve_btfids: fix build with musl libc
bpf: support deferring bpf_link dealloc to after RCU grace period
bpf: put uprobe link's path and task in release callback
====================
projects / thirdparty / kernel / linux.git / log
