--- /dev/null
+From a8772e5d826d0f61f8aa9c284b3ab49035d5273d Mon Sep 17 00:00:00 2001
+From: Tomohiro Mayama <parly-gh@iris.mystia.org>
+Date: Sun, 10 Mar 2019 01:10:12 +0900
+Subject: arm64: dts: rockchip: Fix vcc_host1_5v GPIO polarity on rk3328-rock64
+
+From: Tomohiro Mayama <parly-gh@iris.mystia.org>
+
+commit a8772e5d826d0f61f8aa9c284b3ab49035d5273d upstream.
+
+This patch makes USB ports functioning again.
+
+Fixes: 955bebde057e ("arm64: dts: rockchip: add rk3328-rock64 board")
+Cc: stable@vger.kernel.org
+Suggested-by: Robin Murphy <robin.murphy@arm.com>
+Signed-off-by: Tomohiro Mayama <parly-gh@iris.mystia.org>
+Tested-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+@@ -82,8 +82,7 @@
+
+ vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
+ compatible = "regulator-fixed";
+- enable-active-high;
+- gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
++ gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb20_host_drv>;
+ regulator-name = "vcc_host1_5v";
--- /dev/null
+From ef05bcb60c1a8841e38c91923ba998181117a87c Mon Sep 17 00:00:00 2001
+From: Katsuhiro Suzuki <katsuhiro@katsuster.net>
+Date: Fri, 7 Sep 2018 00:39:47 +0900
+Subject: arm64: dts: rockchip: fix vcc_host1_5v pin assign on rk3328-rock64
+
+From: Katsuhiro Suzuki <katsuhiro@katsuster.net>
+
+commit ef05bcb60c1a8841e38c91923ba998181117a87c upstream.
+
+This patch fixes pin assign of vcc_host1_5v. This regulator is
+controlled by USB20_HOST_DRV signal.
+
+ROCK64 schematic says that GPIO0_A2 pin is used as USB20_HOST_DRV.
+GPIO0_D3 pin is for SPDIF_TX_M0.
+
+Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+@@ -83,7 +83,7 @@
+ vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+- gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
++ gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb20_host_drv>;
+ regulator-name = "vcc_host1_5v";
+@@ -275,7 +275,7 @@
+
+ usb2 {
+ usb20_host_drv: usb20-host-drv {
+- rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
++ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
x86-perf-amd-remove-need-to-check-running-bit-in-nmi-handler.patch
pci-add-function-1-dma-alias-quirk-for-marvell-9170-sata-controller.patch
dm-table-propagate-bdi_cap_stable_writes-to-fix-sporadic-checksum-errors.patch
+arm64-dts-rockchip-fix-vcc_host1_5v-pin-assign-on-rk3328-rock64.patch
+arm64-dts-rockchip-fix-vcc_host1_5v-gpio-polarity-on-rk3328-rock64.patch