Hans de Goede [Fri, 24 May 2019 17:40:27 +0000 (19:40 +0200)]
drm/i915/dsi: Use a fuzzy check for burst mode clock check
Prior to this commit we fail to init the DSI panel on the GPD MicroPC:
https://www.indiegogo.com/projects/gpd-micropc-6-inch-handheld-industry-laptop#/
The problem is intel_dsi_vbt_init() failing with the following error:
*ERROR* Burst mode freq is less than computed
The pclk in the VBT panel modeline is 70000, together with 24 bpp and
4 lines this results in a bitrate value of 70000 * 24 / 4 = 420000.
But the target_burst_mode_freq in the VBT is 418000.
This commit works around this problem by adding an intel_fuzzy_clock_check
when target_burst_mode_freq < bitrate and setting target_burst_mode_freq to
bitrate when that checks succeeds, fixing the panel not working.
Jani Nikula [Fri, 31 May 2019 13:14:55 +0000 (16:14 +0300)]
drm/i915/bios: use port info child pointer to determine LSPCON presence
Avoid iterating the child devices. This should be a non-functional
change, but theoretically this might enable LSPCON on some extra ports
with buggy VBTs.
Jani Nikula [Fri, 31 May 2019 13:14:52 +0000 (16:14 +0300)]
drm/i915/bios: store child device pointer in DDI port info
This allows us to avoid iterating the child devices in some cases.
Also replace the presence bit with child device being non-NULL, and set
the child device pointer last to allow us to take advantage of it in
follow-up work.
Swati Sharma [Wed, 29 May 2019 09:50:52 +0000 (15:20 +0530)]
drm/i915: Enable intel_color_get_config()
In this patch, intel_color_get_config() is enabled and support
for read_luts() will be added platform by platform incrementally
in the follow-up patches.
v4: -Renamed intel_get_color_config to intel_color_get_config [Jani]
-Added the user early on such that support for get_color_config()
can be added platform by platform incrementally [Jani]
v5: -Incorrect place for calling intel_color_get_config() in
haswell_get_pipe_config() [Ville]
v6: -Renamed intel_color_read_luts() to intel_color_get_config()
[Jani and Ville]
Swati Sharma [Wed, 29 May 2019 09:50:51 +0000 (15:20 +0530)]
drm/i915: Introduce vfunc read_luts() to create hw lut
In this patch, a vfunc read_luts() is introduced to create a hw lut
i.e. lut having values read from gamma/degamma registers which will
later be used to compare with sw lut to validate gamma/degamma lut values.
v3: -Rebase
v4: -Renamed intel_get_color_config to intel_color_get_config [Jani]
-Wrapped get_color_config() [Jani]
v5: -Renamed intel_color_get_config() to intel_color_read_luts()
-Renamed get_color_config to read_luts
v6: -Renamed intel_color_read_luts() back to intel_color_get_config()
[Jani and Ville]
Chris Wilson [Tue, 4 Jun 2019 15:38:30 +0000 (16:38 +0100)]
drm/i915/gtt: Replace struct_mutex serialisation for allocation
Instead of relying on the caller holding struct_mutex across the
allocation, push the allocation under a tree of spinlocks stored inside
the page tables. Not only should this allow us to avoid struct_mutex
here, but it will allow multiple users to lock independent ranges for
concurrent allocations, and operate independently. This is vital for
pushing the GTT manipulation into a background thread where dependency
on struct_mutex is verboten, and for allowing other callers to avoid
struct_mutex altogether.
v2: Restore lost GEM_BUG_ON for removing too many PTE from
gen6_ppgtt_clear_range.
Chris Wilson [Tue, 4 Jun 2019 12:00:21 +0000 (13:00 +0100)]
drm/i915: Use unchecked writes for setting up the fences
As the fence registers are not part of the engine powerwells, we do not
need to fiddle with forcewake in order to update a fence. Avoid using
the heavyweight debug checking normal mmio writes as the checking
dominates the selftest runtime and is superfluous!
In the process, retire the I915_WRITE() implicit macro with the new
intel_uncore_write interface.
Ville Syrjälä [Fri, 17 May 2019 19:31:32 +0000 (22:31 +0300)]
drm/i915: Fix plane state dumps
Stop dumping plane->state for planes. That is the old state most of the
time and dumping stale information only serves to confuse people.
Instead dump the new state just for the planes included in the
operation. For now we'll include only the planes for the modeset/fastset
pipes in the dumps. But probably we want to dump them all eventually,
just not quite sure how to present that information nicely to the user.
And while at it let's dump a few more interesting bits from the state.
Ville Syrjälä [Fri, 17 May 2019 19:31:31 +0000 (22:31 +0300)]
drm/i915: Make state dumpers take a const state
Constify a bunch of the arguments of various state dumping
functions. Makes it clear they don't mutate the states.
And fix up some indent fails while at it.
Ville Syrjälä [Fri, 17 May 2019 19:31:30 +0000 (22:31 +0300)]
drm/i915: Dump failed crtc states during atomic check
Currently we're only dumping the failed crtc state if
intel_modeset_pipe_config() fails. Let's do the state
dump if anything else fails afterwards. The downside
is that we lose the immediate knowledge which crtc caused
the failure (unless a lower level function indicates it
with an additional debug print) but having the full state
dumped seems like something that could be beneficial.
Ville Syrjälä [Fri, 17 May 2019 19:31:29 +0000 (22:31 +0300)]
drm/i915: Include crtc_state.active in crtc state dumps
Currently we're not dumping out whether the crtc is actually
active or in dpms off state. Let's include that in the dumps.
And while at it compress out a few lines from the state dump.
Ville Syrjälä [Fri, 17 May 2019 19:31:28 +0000 (22:31 +0300)]
drm/i915: Move state dump to the end of atomic_check()
Currently we're dumping the crtc states before they have
been fully calculated. Move the dumping to the end of
.atomic_check() so we get a fully up to date dump.
Let's also do the dump for fully disabled pipes, but we'll
limit that to just saying that the pipe is disabled since
the rest of the state is going to be nonsense in that case.
v2:
- Moved symlink remove to unregister (Ville)
- Clarified commit message (Jani)
- Changed WARN to DRM_ERROR (Jani)
- Minor codestyle changes proposed by Jani
v3: added blank line
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Oleg Vasilev <oleg.vasilev@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190520150642.3477-1-oleg.vasilev@intel.com
drm/i915: extract intel_display_power.h/c from intel_runtime_pm.h/c
Keep all the device-level PM management in intel_runtime_pm.h/c and move
all the display specific bits into their own file. Also add the new
header to Makefile.header-test.
Apart from the giant code move, the only difference is with the
intel_runtime_<get/put>_raw() functions, which are now exposed in the
header. The _put() version is also not conditionally compiled anymore
since it is ok to always pass the wakeref taken from the _get() to
__intel_runtime_pm_put (it is -1 if tracking is disabled).
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190531222409.9177-2-daniele.ceraolospurio@intel.com
Imre Deak [Fri, 31 May 2019 08:26:26 +0000 (11:26 +0300)]
drm/i915/icl: Ensure port A combo PHY HW state is correct
Make sure the HW state of the port A combo PHY is correct wrt. the
IREFGEN setting. This will force a reprogramming during init or a WARN
during uninit if the setting is incorrect.
On my ICL RVP I haven't seen this check failing and leading to a forced
reinit/WARN, but let's add it still for consistency.
Chris Wilson [Thu, 30 May 2019 20:35:00 +0000 (21:35 +0100)]
drm/i915: Report all objects with allocated pages to the shrinker
Currently, we try to report to the shrinker the precise number of
objects (pages) that are available to be reaped at this moment. This
requires searching all objects with allocated pages to see if they
fulfill the search criteria, and this count is performed quite
frequently. (The shrinker tries to free ~128 pages on each invocation,
before which we count all the objects; counting takes longer than
unbinding the objects!) If we take the pragmatic view that with
sufficient desire, all objects are eventually reapable (they become
inactive, or no longer used as framebuffer etc), we can simply return
the count of pinned pages maintained during get_pages/put_pages rather
than walk the lists every time.
The downside is that we may (slightly) over-report the number of
objects/pages we could shrink and so penalize ourselves by shrinking
more than required. This is mitigated by keeping the order in which we
shrink objects such that we avoid penalizing active and frequently used
objects, and if memory is so tight that we need to free them we would
need to anyway.
v2: Only expose shrinkable objects to the shrinker; a small reduction in
not considering stolen and foreign objects.
v3: Restore the tracking from a "backup" copy from before the gem/ split
Chris Wilson [Thu, 30 May 2019 20:34:59 +0000 (21:34 +0100)]
drm/i915: Track the purgeable objects on a separate eviction list
Currently the purgeable objects, I915_MADV_DONTNEED, are mixed in the
normal bound/unbound lists. Every shrinker pass starts with an attempt
to purge from this set of unneeded objects, which entails us doing a
walk over both lists looking for any candidates. If there are none, and
since we are shrinking we can reasonably assume that the lists are
full!, this becomes a very slow futile walk.
If we separate out the purgeable objects into own list, this search then
becomes its own phase that is preferentially handled during shrinking.
Instead the cost becomes that we then need to filter the purgeable list
if we want to distinguish between bound and unbound objects.
Jani Nikula [Mon, 6 May 2019 13:48:01 +0000 (16:48 +0300)]
drm/i915: add force_probe module parameter to replace alpha_support
The i915.alpha_support module parameter has caused some confusion along
the way. Add new i915.force_probe parameter to specify PCI IDs of
devices to probe, when the devices are recognized but not automatically
probed by the driver. The name is intended to reflect what the parameter
effectively does, avoiding any overloaded semantics of "alpha" and
"support".
The parameter supports "" to disable, "<pci-id>,[<pci-id>,...]" to
enable force probe for one or more devices, and "*" to enable force
probe for all known devices.
Also add new CONFIG_DRM_I915_FORCE_PROBE config option to replace the
DRM_I915_ALPHA_SUPPORT option. This defaults to "*" if
DRM_I915_ALPHA_SUPPORT=y.
Instead of replacing i915.alpha_support immediately, let the two coexist
for a while, with a deprecation message, for a transition period.
Colin Ian King [Fri, 31 May 2019 10:32:01 +0000 (11:32 +0100)]
drm/i915: fix use of uninitialized pointer vaddr
The assignment of err is using the incorrect pointer vaddr that has
not been initialized. Fix this by using the correct pointer obj instead.
Addresses-Coverity: ("Uninitialized pointer read") Fixes: 6501aa4e3a45 ("drm/i915: add in-kernel blitter client") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190531103201.10124-1-colin.king@canonical.com
Chris Wilson [Thu, 30 May 2019 12:13:11 +0000 (13:13 +0100)]
drm/i915: Make default value for i915.mmio_debug a compile time option
The normal behaviour is to periodically check for a mmio access error,
and once detected enable mmio access checking. However this is useless
if the error only occurs once during module load, and so we may miss
such errors in CI. To allow ourselves to catch them, allow CI to opt into
always enabling mmio debugging.
drm/i915: Split off pci_driver.remove() tail to drm_driver.release()
In order to support driver hot unbind, some cleanup operations, now
performed on PCI driver remove, must be called later, after all device
file descriptors are closed.
Split out those operations from the tail of pci_driver.remove()
callback and put them into drm_driver.release() which is called as soon
as all references to the driver are put. As a result, those cleanups
will be now run on last drm_dev_put(), either still called from
pci_driver.remove() if all device file descriptors are already closed,
or on last drm_release() file operation.
Matthew Auld [Wed, 29 May 2019 12:31:08 +0000 (13:31 +0100)]
drm/i915: add in-kernel blitter client
The plan is to use the blitter engine for async object clearing when
using local memory, but before we can move the worker to get_pages() we
have to first tame some more of our struct_mutex usage. With this in
mind we should be able to upstream the object clearing as some
selftests, which should serve as a guinea pig for the ongoing locking
rework and upcoming async get_pages() framework.
Matthew Auld [Wed, 29 May 2019 12:31:07 +0000 (13:31 +0100)]
drm/i915/gtt: grab wakeref in gen6_alloc_va_range
Some steps in gen6_alloc_va_range require the HW to be awake, so ideally
we should be grabbing the wakeref ourselves and not relying on the
caller already holding it for us.
Chris Wilson [Wed, 29 May 2019 09:34:07 +0000 (10:34 +0100)]
drm/i915/gtt: Avoid overflowing the WC stash
An interesting issue cropped with making the pagetables be allocated and
freed concurrently (i.e. removing their grandeous struct_mutex guard)
was that we would overflow the page stash. This happens when we have
multiple allocators grabbing WC pages such that we fill the vm's local
page stash and then when we free another page, the page stash is already
full and we overflow.
The fix is quite simple: to check for a full page stash before adding
another. This results in us keeping a vm local page stash around for
much longer, which is both a blessing and a curse.
Jani Nikula [Wed, 29 May 2019 08:21:50 +0000 (11:21 +0300)]
Revert "drm/i915: Expand subslice mask"
This reverts commit 1ac159e23c2c ("drm/i915: Expand subslice mask"),
which kills ICL due to GEM_BUG_ON() sanity checks before CI even gets a
chance to do anything.
The commit exposes an issue in commit 1e40d4aea57b ("drm/i915/cnl:
Implement WaProgramMgsrForCorrectSliceSpecificMmioReads"), which will
also need to be addressed.
There's a proposed fix [1], but considering the seeming uncertainty with
the fix as well as the size of the regressing commit (in this context,
the one that actually brings down ICL), this warrants a revert to get
ICL working, and gives us time to get all of this right without
rushing. Even if this means shooting the messenger.
Chris Wilson [Tue, 28 May 2019 15:40:53 +0000 (16:40 +0100)]
drm/i915: Avoid refcount_inc on known zero count
In intel_wakeref_auto, we use refcount_inc_not_zero to detect the first
use and initialise the timer. On doing so, we have to avoid using
refcount_inc on that zero count as the debug code flags that as an
error:
refcount_t: increment on 0; use-after-free.
Rearrange the code so that if we know the count is 0 and we are
initialising, we explicitly set it to 1.
Dan Carpenter [Wed, 29 May 2019 11:03:55 +0000 (14:03 +0300)]
drm/i915: selftest_lrc: Check the correct variable
We should check "request[n]" instead of just "request".
Fixes: 78e41ddd2198 ("drm/i915: Apply an execution_mask to the virtual_engine") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190529110355.GA19119@mwanda
Chris Wilson [Tue, 28 May 2019 07:53:54 +0000 (08:53 +0100)]
drm/i915: Take a runtime pm wakeref for atomic commits
Before we start prepping the system for an atomic modeset, wake the
device up. We then keep track of this wakeref until we complete the
atomic commit, so we hold keep the device awake for all potential HW
access, and do not allow the device to sleep with a pending modeset.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110771 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528075354.22341-1-chris@chris-wilson.co.uk
Stuart Summers [Fri, 24 May 2019 15:40:22 +0000 (08:40 -0700)]
drm/i915: Expand subslice mask
Currently, the subslice_mask runtime parameter is stored as an
array of subslices per slice. Expand the subslice mask array to
better match what is presented to userspace through the
I915_QUERY_TOPOLOGY_INFO ioctl. The index into this array is
then calculated:
slice * subslice stride + subslice index / 8
v2: fix spacing in set_sseu_info args
use set_sseu_info to initialize sseu data when building
device status in debugfs
rename variables in intel_engine_types.h to avoid checkpatch
warnings
v3: update headers in intel_sseu.h
v4: add const to some sseu_dev_info variables
use sseu->eu_stride for EU stride calculations
v5: address review comments from Tvrtko and Daniele
v6: remove extra space in intel_sseu_get_subslices
return the correct subslice enable in for_each_instdone
add GEM_BUG_ON to ensure user doesn't pass invalid ss_mask size
use printk formatted string for subslice mask
v7: remove string.h header and rebase
Stuart Summers [Fri, 24 May 2019 15:40:21 +0000 (08:40 -0700)]
drm/i915: Refactor sseu helper functions
Move functions to intel_sseu.h and remove inline qualifier.
Additionally, ensure these are all prefixed with intel_sseu_*
to match the convention of other functions in i915.
v2: fix spacing from checkpatch warning
v3: squash helper function changes into a single patch
break 80 character line to fix checkpatch warning
move get/set_eus helpers to intel_device_info.c
v4: Remove intel_ prefix from static functions in
intel_device_info.c and correctly copy changes
to stride calculation in those functions.
Stuart Summers [Fri, 24 May 2019 15:40:19 +0000 (08:40 -0700)]
drm/i915: Add macro for SSEU stride calculation
Subslice stride and EU stride are calculated multiple times in
i915_query. Move this calculation to a macro to reduce code duplication.
v2: update headers in intel_sseu.h
v3: use GEN_SSEU_STRIDE for stride calculations in intel_sseu.h
apply s/bits/max_entries/ to GEN_SSEU_STRIDE parameter
Ville Syrjälä [Mon, 13 May 2019 13:39:03 +0000 (16:39 +0300)]
drm/i915: Update pipe gamma enable bits when C8 planes are getting enabled/disabled
When the first C8 plane gets enabled, or the last one gets disabled we
may need to enable/disable the pipe gamma for the other active planes.
Check for that and run through the normal intel_color_check() path.
Chris Wilson [Tue, 28 May 2019 09:29:56 +0000 (10:29 +0100)]
drm/i915: Drop the deferred active reference
An old optimisation to reduce the number of atomics per batch sadly
relies on struct_mutex for coordination. In order to remove struct_mutex
from serialising object/context closing, always taking and releasing an
active reference on first use / last use greatly simplifies the locking.
Chris Wilson [Tue, 28 May 2019 09:29:55 +0000 (10:29 +0100)]
drm/i915: Rename intel_context.active to .inflight
Rename the engine this HW context is currently active upon (that we are
flying upon) to disambiguate between the mixture of different active
terms (and prevent conflict in future patches).
Chris Wilson [Tue, 28 May 2019 09:29:51 +0000 (10:29 +0100)]
drm/i915: Move GEM object domain management from struct_mutex to local
Use the per-object local lock to control the cache domain of the
individual GEM objects, not struct_mutex. This is a huge leap forward
for us in terms of object-level synchronisation; execbuffers are
coordinated using the ww_mutex and pread/pwrite is finally fully
serialised again.
Uma Shankar [Sat, 18 May 2019 10:39:27 +0000 (16:09 +0530)]
drm/i915: Write HDR infoframe and send to panel
Enable writing of HDR metadata infoframe to panel.
The data will be provid by usersapace compositors, based
on blending policies and passsed to driver through a blob
property.
v2: Rebase
v3: Fixed a warning message
v4: Addressed Shashank's review comments
v5: Rebase. Added infoframe calculation in compute config.
v6: Addressed Shashank's review comment. Added HDR metadata
support from GEN10 onwards as per Shashank's recommendation.
v7: Addressed Shashank's review comments
v8: Added Shashank's RB.
v9: Addressed Ville's review comments.
v10: Removed a redundant check as core already handles it, as per
Ville's comment.
v11: Added the metadata available check to avoid failure in
compute_config.
Uma Shankar [Thu, 16 May 2019 14:10:15 +0000 (19:40 +0530)]
drm/i915: Add DRM Infoframe handling for BYT/CHT
BYT/CHT doesn't support DRM Infoframe. This caused
a WARN_ON due to a missing CASE while executing
intel_hdmi_infoframes_enabled function. This patch
fixes the same.
Michal Wajdeczko [Mon, 27 May 2019 18:36:12 +0000 (18:36 +0000)]
drm/i915/huc: Define HuC firmware version for Icelake
Define HuC firmware version for Icelake.
v2: 8.4.3238 is now available
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Tony Ye <tony.ye@intel.com> Reviewed-by: Tony Ye <tony.ye@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-17-michal.wajdeczko@intel.com
Oscar Mateo [Mon, 27 May 2019 18:36:07 +0000 (18:36 +0000)]
drm/i915/guc: Create vfuncs for the GuC interrupts control functions
Controlling and handling of the GuC interrupts is Gen specific.
Create virtual functions to avoid redundant runtime Gen checks.
Gen-specific versions of these functions will follow.
v2: move vfuncs to struct guc (Daniele)
v3: rebased
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-12-michal.wajdeczko@intel.com
Michal Wajdeczko [Mon, 27 May 2019 18:36:05 +0000 (18:36 +0000)]
drm/i915/guc: New GuC scratch registers for Gen11
Gen11 adds new set of scratch registers that can be used for MMIO
based Host-to-Guc communication. Due to limited number of these
registers it is expected that host will use them only for command
transport buffers (CTB) communication setup if one is available.
Bspec: 21044
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-10-michal.wajdeczko@intel.com
Michal Wajdeczko [Mon, 27 May 2019 18:36:04 +0000 (18:36 +0000)]
drm/i915/guc: New GuC interrupt register for Gen11
Gen11 defines new more flexible Host-to-GuC interrupt register.
Now the host can write any 32-bit payload to trigger an interrupt
and GuC can additionally read this payload from the register.
Current GuC firmware ignores the payload so we just write 0.
Bspec: 21043
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-9-michal.wajdeczko@intel.com
Michal Wajdeczko [Mon, 27 May 2019 18:36:00 +0000 (18:36 +0000)]
drm/i915/guc: Reset GuC ADS during sanitize
GuC stores some data in there, which might be stale after a reset.
Reinitialize whole ADS in case any part of it was corrupted during
previous GuC run.
v2: s/reinit/init, update functions descriptions (Tomek/Michal)
v3: reset ADS right before fw upload
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: MichaĹ Winiarski <michal.winiarski@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Reviewed-by: Tomasz Lis <tomasz.lis@intel.com> #v2 Reviewed-by: MichaĹ Winiarski <michal.winiarski@intel.com> #v2 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-5-michal.wajdeczko@intel.com
Michal Wajdeczko [Mon, 27 May 2019 18:35:59 +0000 (18:35 +0000)]
drm/i915/guc: Updates for GuC 32.0.3 firmware
New GuC 32.0.3 firmware made many changes around its ABI that
require driver updates:
* FW release version numbering schema now includes patch number
* FW release version encoding in CSS header
* Boot parameters
* Suspend/resume protocol
* Sample-forcewake command
* Additional Data Structures (ADS)
This commit is a squash of patches 3-8 from series [1].
[1] https://patchwork.freedesktop.org/series/58760/
Michal Wajdeczko [Mon, 27 May 2019 18:35:58 +0000 (18:35 +0000)]
drm/i915/guc: Don't allow GuC submission
Due to the upcoming changes to the GuC ABI interface, we must
disable GuC submission mode until final ABI will be available
on all GuC firmwares.
To avoid regressions on systems configured to run with no longer
supported configuration "enable_guc=3" or "enable_guc=1" clear
GuC submission bit.
v2: force switch to non-GuC submission mode
v3: use GEM_BUG_ON (Joonas)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Tony Ye <tony.ye@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Jeff Mcgee <jeff.mcgee@intel.com> Cc: Antonio Argenziano <antonio.argenziano@intel.com> Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Cc: Martin Peres <martin.peres@linux.intel.com> Acked-by: Martin Peres <martin.peres@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-3-michal.wajdeczko@intel.com
Michal Wajdeczko [Mon, 27 May 2019 18:35:57 +0000 (18:35 +0000)]
drm/i915/guc: Change platform default GuC mode
Today our most desired GuC configuration is to only enable HuC
if it is available (as we need authenticated HuC firmware to enable
all media codecs on the hardware) and we really don't care about
having GuC submission enabled.
Change platform default GuC mode to match our goal, but note that
we still don't change default modparam value (GuC/HuC disabled).
v2: add why HuC is so important (Joonas)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Tony Ye <tony.ye@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Jeff Mcgee <jeff.mcgee@intel.com> Cc: Antonio Argenziano <antonio.argenziano@intel.com> Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Acked-by: Tony Ye <tony.ye@intel.com> Reviewed-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-2-michal.wajdeczko@intel.com
Chris Wilson [Mon, 27 May 2019 11:51:14 +0000 (12:51 +0100)]
drm/i915: Keep user GGTT alive for a minimum of 250ms
Do not allow runtime pm autosuspend to remove userspace GGTT mmaps too
quickly. For example, igt sets the autosuspend delay to 0, and so we
immediately attempt to perform runtime suspend upon releasing the
wakeref. Unfortunately, that involves tearing down GGTT mmaps as they
require an active device.
Override the autosuspend for GGTT mmaps, by keeping the wakeref around
for 250ms after populating the PTE for a fresh mmap.
v2: Prefer refcount_t for its under/overflow error detection
v3: Flush the user runtime autosuspend prior to system system.
projects / thirdparty / kernel / stable.git / log
