If SVGA_3D_CMD_DX_SET_SHADER is called with a shader ID
of SVGA3D_INVALID_ID, and a shader type of
SVGA3D_SHADERTYPE_INVALID, the calculated binding.shader_slot
will be 4294967295, leading to an out-of-bounds read in vmw_binding_loc()
when the offset is calculated.
The fields filter would not work with child fields, as the respective
parents would not be included. No parents displayed == no childs displayed.
To reproduce, run on s390 (would work on other platforms, too, but would
require a different filter name):
- Run 'kvm_stat -d'
- Press 'f'
- Enter 'instruct'
Notice that events like instruction_diag_44 or instruction_diag_500 are not
displayed - the output remains empty.
With this patch, we will filter by matching events and their parents.
However, consider the following example where we filter by
instruction_diag_44:
Note that the parent ('exit_instruction') displays the total events, but
the childs listed do not match its total (256 instead of 276). This is
intended (since we're filtering all but one child), but might be confusing
on first sight.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
kselftests exposed a problem in the s390 handling for memory slots.
Right now we only do proper memory slot handling for creation of new
memory slots. Neither MOVE, nor DELETION are handled properly. Let us
implement those.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to the SDM, for MSR_IA32_PERFCTR0/1 "the lower-order 32 bits of
each MSR may be written with any value, and the high-order 8 bits are
sign-extended according to the value of bit 31", but the fixed counters
in real hardware are limited to the width of the fixed counters ("bits
beyond the width of the fixed-function counter are reserved and must be
written as zeros"). Fix KVM to do the same.
Reported-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
KVM has helpers to handle the condition codes of trapped aarch32
instructions. These are marked __hyp_text and used from HYP, but they
aren't built by the 'hyp' Makefile, which has all the runes to avoid ASAN
and KCOV instrumentation.
Move this code to a new hyp/aarch32.c to avoid a hyp-panic when starting
an aarch32 guest on a host built with the ASAN/KCOV debug options.
Fixes: 021234ef3752f ("KVM: arm64: Make kvm_condition_valid32() accessible from EL2") Fixes: 8cebe750c4d9a ("arm64: KVM: Make kvm_skip_instr32 available to HYP") Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix a racing condition in ipheth.c that can lead to slow performance.
Bug: In ipheth_tx(), netif_wake_queue() may be called on the callback
ipheth_sndbulk_callback(), _before_ netif_stop_queue() is called.
When this happens, the queue is stopped longer than it needs to be,
thus reducing network performance.
Fix: Move netif_stop_queue() in front of usb_submit_urb(). Now the order
is always correct. In case, usb_submit_urb() fails, the queue is woken up
again as callback will not fire.
Testing: This racing condition is usually not noticeable, as it has to
occur very frequently to slowdown the network. The callback from the USB
is usually triggered slow enough, so the situation does not appear.
However, on a Ubuntu Linux on VMWare Workstation, running on Windows 10,
the we loose the race quite often and the following speedup can be noticed:
Without this patch: Download: 4.10 Mbit/s, Upload: 4.01 Mbit/s
With this patch: Download: 36.23 Mbit/s, Upload: 17.61 Mbit/s
Signed-off-by: Oliver Zweigle <Oliver.Zweigle@faro.com> Signed-off-by: Bernd Eckstein <3ernd.Eckstein@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
hist_field_var_ref() is an implementation of hist_field_fn_t(), which
can be called with a null tracing_map_elt elt param when assembling a
key in event_hist_trigger().
In the case of hist_field_var_ref() this doesn't make sense, because a
variable can only be resolved by looking it up using an already
assembled key i.e. a variable can't be used to assemble a key since
the key is required in order to access the variable.
Upper layers should prevent the user from constructing a key using a
variable in the first place, but in case one slips through, it
shouldn't cause a NULL pointer dereference. Also if one does slip
through, we want to know about it, so emit a one-time warning in that
case.
When running under a pipe, some timer tests would not report output in
real-time because stdout flushes were missing after printf()s that lacked
a newline. This adds them to restore real-time status output that humans
can enjoy.
The IPv4 testing address are all in 192.51.100.0 subnet. It doesn't make
sense to set a 198.51.100.1 local address. Should be a typo.
Fixes: 65b2b4939a64 ("selftests: net: initial fib rule tests") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Several places (dimm_devs.c, core.c etc) include label.h but only
label.c uses NSINDEX_SIGNATURE, so move its definition to label.c
instead.
In file included from drivers/nvdimm/dimm_devs.c:23:
drivers/nvdimm/label.h:41:19: warning: 'NSINDEX_SIGNATURE' defined but
not used [-Wunused-const-variable=]
Also, some places abuse "/**" which is only reserved for the kernel-doc.
Currently an int is being shifted and the result is being cast to a u64
which leads to undefined behaviour if the shift is more than 31 bits. Fix
this by casting the integer value 1 to u64 before the shift operation.
Addresses-Coverity: ("Bad shift operation") Fixes: 7b594769120b ("[SCSI] bnx2fc: Handle REC_TOV error code from firmware") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are several Beckhoff Automation industrial PC boards which use
pmc_plt_clk* clocks for ethernet controllers. This adds affected boards
to critclk_systems DMI table so the clocks are marked as CLK_CRITICAL and
not turned off.
The Lex 3I380D industrial PC has 4 ethernet controllers on board
which need pmc_plt_clk0 - 3 to function, add it to the critclk_systems
DMI table, so that drivers/clk/x86/clk-pmc-atom.c will mark the clocks
as CLK_CRITICAL and they will not get turned off.
Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Reported-and-tested-by: Semyon Verchenko <semverchenko@factor-ts.ru> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Unconditionally hide device pm latency tolerance when uninitializing
the controller to ensure all qos resources are released so that we're
not leaking this memory. This is safe to call if none were allocated in
the first place, or were previously freed.
Fixes: c5552fde102fc("nvme: Enable autonomous power state transitions") Suggested-by: Keith Busch <keith.busch@intel.com> Tested-by: David Milburn <dmilburn@redhat.com> Signed-off-by: Yufen Yu <yuyufen@huawei.com>
[changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Holding the SRCU critical section protecting the namespace list can
cause deadlocks when using the per-namespace admin passthrough ioctl to
delete as namespace. Release it earlier when performing per-controller
ioctls to avoid that.
Reported-by: Kenneth Heitke <kenneth.heitke@intel.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
If we can't get a namespace don't leak the SRCU lock. nvme_ioctl was
working around this, but nvme_pr_command wasn't handling this properly.
Just do what callers would usually expect.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The arm64 ptdump code can race with concurrent modification of the
kernel page tables. At the time this was added, this was sound as:
* Modifications to leaf entries could result in stale information being
logged, but would not result in a functional problem.
* Boot time modifications to non-leaf entries (e.g. freeing of initmem)
were performed when the ptdump code cannot be invoked.
* At runtime, modifications to non-leaf entries only occurred in the
vmalloc region, and these were strictly additive, as intermediate
entries were never freed.
However, since commit:
commit 324420bf91f6 ("arm64: add support for ioremap() block mappings")
... it has been possible to create huge mappings in the vmalloc area at
runtime, and as part of this existing intermediate levels of table my be
removed and freed.
It's possible for the ptdump code to race with this, and continue to
walk tables which have been freed (and potentially poisoned or
reallocated). As a result of this, the ptdump code may dereference bogus
addresses, which could be fatal.
Since huge-vmap is a TLB and memory optimization, we can disable it when
the runtime ptdump code is in use to avoid this problem.
Cc: Catalin Marinas <catalin.marinas@arm.com> Fixes: 324420bf91f60582 ("arm64: add support for ioremap() block mappings") Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There was a missing qualification of a valid ndlp structure when calling to
send an RRQ for an abort. Add the check.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Tested-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Many of the exit cases were not releasing the rcu read lock. Corrected the
exit paths.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Tested-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/scsi/qedi/qedi_iscsi.c: In function 'qedi_ep_connect':
drivers/scsi/qedi/qedi_iscsi.c:813:23: warning: variable 'udev' set but not used [-Wunused-but-set-variable]
drivers/scsi/qedi/qedi_iscsi.c:812:18: warning: variable 'cdev' set but not used [-Wunused-but-set-variable]
These have never been used since introduction.
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The buggy address belongs to the variable:
__func__.67584+0x0/0xffffffffffffd520 [qedi]
Memory state around the buggy address: ffffffffc12b0980: fa fa fa fa 00 04 fa fa fa fa fa fa 00 00 05 fa ffffffffc12b0a00: fa fa fa fa 00 00 04 fa fa fa fa fa 00 05 fa fa
> ffffffffc12b0a80: fa fa fa fa 00 06 fa fa fa fa fa fa 00 02 fa fa
^ ffffffffc12b0b00: fa fa fa fa 00 00 04 fa fa fa fa fa 00 00 03 fa ffffffffc12b0b80: fa fa fa fa 00 00 02 fa fa fa fa fa 00 00 04 fa
Currently the qedi_dbg_* family of functions can overrun the end of the
source string if it is less than the destination buffer length because of
the use of a fixed sized memcpy. Remove the memset/memcpy calls to nfunc
and just use func instead as it is always a null terminated string.
Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When we traverse xattr entries via __find_xattr(),
if the raw filesystem content is faked or any hardware failure occurs,
out-of-bound error can be detected by KASAN.
Fix the issue by introducing boundary check.
arch/s390/lib/uaccess.c is built without kasan instrumentation. Kasan
checks are performed explicitly in copy_from_user/copy_to_user
functions. But since those functions could be inlined, calls from
files like uaccess.c with instrumentation disabled won't generate
kasan reports. This is currently the case with strncpy_from_user
function which was revealed by newly added kasan test. Avoid inlining of
copy_from_user/copy_to_user when the kernel is built with kasan support
to make sure kasan checks are fully functional.
The fix attempt was incorrect, leading to the mutex deadlock through
the close of OSS sequencer client. The proper fix needs more
consideration, so let's revert it now.
The snd_seq_ioctl_get_subscription() retrieves the port subscriber
information as a pointer, while the object isn't protected, hence it
may be deleted before the actual reference. This race was spotted by
syzkaller and may lead to a UAF.
The fix is simply copying the data in the lookup function that
performs in the rwsem to protect against the deletion.
ALSA OSS sequencer calls the ioctl function indirectly via
snd_seq_kernel_client_ctl(). While we already applied the protection
against races between the normal ioctls and writes via the client's
ioctl_mutex, this code path was left untouched. And this seems to be
the cause of still remaining some rare UAF as spontaneously triggered
by syzkaller.
For the sake of robustness, wrap the ioctl_mutex also for the call via
snd_seq_kernel_client_ctl(), too.
kernel/kcov.o: warning: objtool: write_comp_data()+0x138: call to __stack_chk_fail() with UACCESS enabled
kernel/kcov.o: warning: objtool: __sanitizer_cov_trace_pc()+0xd9: call to __stack_chk_fail() with UACCESS enabled
All the other instrumentation (KASAN,UBSAN) also have stack protector
disabled.
Our SDVO audio support is pretty bogus. We can't push audio over the
SDVO bus, so trying to enable audio in the SDVO control register doesn't
do anything. In fact it looks like the SDVO encoder will always mix in
the audio coming over HDA, and there's no (at least documented) way to
disable that from our side. So HDMI audio does work currently on gen4
but only by luck really. On gen3 it got broken by the referenced commit.
And what has always been missing on every platform is the ELD.
To pass the ELD to the audio driver we need to write it to magic buffer
in the SDVO encoder hardware which then gets pulled out via HDA in the
other end. Ie. pretty much the same thing we had for native HDMI before
we started to just pass the ELD between the drivers. This sort of
explains why we even have that silly hardware buffer with native HDMI.
$ cat /proc/asound/card0/eld#1.0
-monitor_present 0
-eld_valid 0
+monitor_present 1
+eld_valid 1
+monitor_name LG TV
+connection_type HDMI
+...
This also fixes our state readout since we can now query the SDVO
encoder about the state of the "ELD valid" and "presence detect"
bits. As mentioned those don't actually control whether audio
gets sent over the HDMI cable, but it's the best we can do. And with
the state checker appeased we can re-enable HDMI audio for gen3.
Cc: stable@vger.kernel.org Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: zardam@gmail.com Tested-by: zardam@gmail.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108976 Fixes: de44e256b92c ("drm/i915/sdvo: Shut up state checker with hdmi cards on gen3") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190409144054.24561-3-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit dc49a56bd43bb04982e64b44436831da801d0237) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the output sample rate is [8kHz, 30kHz], the limitation
of the supported ratio range is [1/24, 8]. In the driver
we use (8kHz, 30kHz) instead of [8kHz, 30kHz].
So this patch is to fix this issue and the potential rounding
issue with divider.
Fixes: fff6e03c7b65 ("ASoC: fsl_asrc: add support for 8-30kHz
output sample rate") Cc: <stable@vger.kernel.org> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add regcache_mark_dirty before regcache_sync for power
of codec may be lost at suspend, then all the register
need to be reconfigured.
Fixes: 0c516b4ff85c ("ASoC: cs42xx8: Add codec driver
support for CS42448/CS42888") Cc: <stable@vger.kernel.org> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A PF_EXITING task can stay associated with an offline css. If such
task calls task_get_css(), it can get stuck indefinitely. This can be
triggered by BSD process accounting which writes to a file with
PF_EXITING set when racing against memcg disable as in the backtrace
at the end.
After this change, task_get_css() may return a css which was already
offline when the function was called. None of the existing users are
affected by this change.
INFO: rcu_sched self-detected stall on CPU
INFO: rcu_sched detected stalls on CPUs/tasks:
...
NMI backtrace for cpu 0
...
Call Trace:
<IRQ>
dump_stack+0x46/0x68
nmi_cpu_backtrace.cold.2+0x13/0x57
nmi_trigger_cpumask_backtrace+0xba/0xca
rcu_dump_cpu_stacks+0x9e/0xce
rcu_check_callbacks.cold.74+0x2af/0x433
update_process_times+0x28/0x60
tick_sched_timer+0x34/0x70
__hrtimer_run_queues+0xee/0x250
hrtimer_interrupt+0xf4/0x210
smp_apic_timer_interrupt+0x56/0x110
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:balance_dirty_pages_ratelimited+0x28f/0x3d0
...
btrfs_file_write_iter+0x31b/0x563
__vfs_write+0xfa/0x140
__kernel_write+0x4f/0x100
do_acct_process+0x495/0x580
acct_process+0xb9/0xdb
do_exit+0x748/0xa00
do_group_exit+0x3a/0xa0
get_signal+0x254/0x560
do_signal+0x23/0x5c0
exit_to_usermode_loop+0x5d/0xa0
prepare_exit_to_usermode+0x53/0x80
retint_user+0x8/0x8
Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org # v4.2+ Fixes: ec438699a9ae ("cgroup, block: implement task_get_css() and use it in bio_associate_current()") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When people set a writeback percent via sysfs file,
/sys/block/bcache<N>/bcache/writeback_percent
current code directly sets BCACHE_DEV_WB_RUNNING to dc->disk.flags
and schedules kworker dc->writeback_rate_update.
If there is no cache set attached to, the writeback kernel thread is
not running indeed, running dc->writeback_rate_update does not make
sense and may cause NULL pointer deference when reference cache set
pointer inside update_writeback_rate().
This patch checks whether the cache set point (dc->disk.c) is NULL in
sysfs interface handler, and only set BCACHE_DEV_WB_RUNNING and
schedule dc->writeback_rate_update when dc->disk.c is not NULL (it
means the cache device is attached to a cache set).
This problem might be introduced from initial bcache commit, but
commit 3fd47bfe55b0 ("bcache: stop dc->writeback_rate_update properly")
changes part of the original code piece, so I add 'Fixes: 3fd47bfe55b0'
to indicate from which commit this patch can be applied.
Recently people report bcache code compiled with gcc9 is broken, one of
the buggy behavior I observe is that two adjacent 4KB I/Os should merge
into one but they don't. Finally it turns out to be a stack corruption
caused by macro PRECEDING_KEY().
See how PRECEDING_KEY() is defined in bset.h,
437 #define PRECEDING_KEY(_k) \
438 ({ \
439 struct bkey *_ret = NULL; \
440 \
441 if (KEY_INODE(_k) || KEY_OFFSET(_k)) { \
442 _ret = &KEY(KEY_INODE(_k), KEY_OFFSET(_k), 0); \
443 \
444 if (!_ret->low) \
445 _ret->high--; \
446 _ret->low--; \
447 } \
448 \
449 _ret; \
450 })
At line 442, _ret points to address of a on-stack variable combined by
KEY(), the life range of this on-stack variable is in line 442-446,
once _ret is returned to bch_btree_insert_key(), the returned address
points to an invalid stack address and this address is overwritten in
the following called bch_btree_iter_init(). Then argument 'search' of
bch_btree_iter_init() points to some address inside stackframe of
bch_btree_iter_init(), exact address depends on how the compiler
allocates stack space. Now the stack is corrupted.
Fixes: 0eacac22034c ("bcache: PRECEDING_KEY()") Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Rolf Fokkens <rolf@rolffokkens.nl> Reviewed-by: Pierre JUHEN <pierre.juhen@orange.fr> Tested-by: Shenghui Wang <shhuiw@foxmail.com> Tested-by: Pierre JUHEN <pierre.juhen@orange.fr> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Nix <nix@esperi.org.uk> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Acorn i2c driver (for RiscPC) triggers the "i2c adapter has no name"
warning in the I2C core driver, resulting in the RTC being inaccessible.
Fix this.
Fixes: 2236baa75f70 ("i2c: Sanity checks on adapter registration") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Apparently, some Qualcomm arm64 platforms which appear to expose their
SMMU global register space are still, in fact, using a hypervisor to
mediate it by trapping and emulating register accesses. Sadly, some
deployed versions of said trapping code have bugs wherein they go
horribly wrong for stores using r31 (i.e. XZR/WZR) as the source
register.
While this can be mitigated for GCC today by tweaking the constraints
for the implementation of writel_relaxed(), to avoid any potential
arms race with future compilers more aggressively optimising register
allocation, the simple way is to just remove all the problematic
constant zeros. For the write-only TLB operations, the actual value is
irrelevant anyway and any old nearby variable will provide a suitable
GPR to encode. The one point at which we really do need a zero to clear
a context bank happens before any of the TLB maintenance where crashes
have been reported, so is apparently not a problem... :/
Reported-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Tested-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Acked-by: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Restore the read memory barrier in __ptrace_may_access() that was deleted
a couple years ago. Also add comments on this barrier and the one it pairs
with to explain why they're there (as far as I understand).
Fixes: bfedb589252c ("mm: Add a user_ns owner to mm_struct and fix ptrace permission checks") Cc: stable@vger.kernel.org Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Recently syzbot in conjunction with KMSAN reported that
ptrace_peek_siginfo can copy an uninitialized siginfo to userspace.
Inspecting ptrace_peek_siginfo confirms this.
The problem is that off when initialized from args.off can be
initialized to a negaive value. At which point the "if (off >= 0)"
test to see if off became negative fails because off started off
negative.
Prevent the core problem by adding a variable found that is only true
if a siginfo is found and copied to a temporary in preparation for
being copied to userspace.
Prevent args.off from being truncated when being assigned to off by
testing that off is <= the maximum possible value of off. Convert off
to an unsigned long so that we should not have to truncate args.off,
we have well defined overflow behavior so if we add another check we
won't risk fighting undefined compiler behavior, and so that we have a
type whose maximum value is easy to test for.
Cc: Andrei Vagin <avagin@gmail.com> Cc: stable@vger.kernel.org Reported-by: syzbot+0d602a1b0d8c95bdf299@syzkaller.appspotmail.com Fixes: 84c751bd4aeb ("ptrace: add ability to retrieve signals without removing from a queue (v4)") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On the CMA allocation path, isolate_migratepages_range() could isolate
unevictable LRU pages and reclaim_clean_page_from_list() can try to
reclaim them if they are clean file-backed pages.
page:ffffffbf02f33b40 count:86 mapcount:84 mapping:ffffffc08fa7a810 index:0x24
flags: 0x19040c(referenced|uptodate|arch_1|mappedtodisk|unevictable|mlocked)
raw: 000000000019040cffffffc08fa7a81000000000000000240000005600000053
raw: ffffffc009b05b20ffffffc009b05b200000000000000000ffffffc09bf3ee80
page dumped because: VM_BUG_ON_PAGE(PageLRU(page) || PageUnevictable(page))
page->mem_cgroup:ffffffc09bf3ee80
------------[ cut here ]------------
kernel BUG at /home/build/farmland/adroid9.0/kernel/linux/mm/vmscan.c:1350!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 7125 Comm: syz-executor Tainted: G S 4.14.81 #3
Hardware name: ASR AQUILAC EVB (DT)
task: ffffffc00a54cd00 task.stack: ffffffc009b00000
PC is at shrink_page_list+0x1998/0x3240
LR is at shrink_page_list+0x1998/0x3240
pc : [<ffffff90083a2158>] lr : [<ffffff90083a2158>] pstate: 60400045
sp : ffffffc009b05940
..
shrink_page_list+0x1998/0x3240
reclaim_clean_pages_from_list+0x3c0/0x4f0
alloc_contig_range+0x3bc/0x650
cma_alloc+0x214/0x668
ion_cma_allocate+0x98/0x1d8
ion_alloc+0x200/0x7e0
ion_ioctl+0x18c/0x378
do_vfs_ioctl+0x17c/0x1780
SyS_ioctl+0xac/0xc0
Wu found it's due to commit ad6b67041a45 ("mm: remove SWAP_MLOCK in
ttu"). Before that, unevictable pages go to cull_mlocked so that we
can't reach the VM_BUG_ON_PAGE line.
To fix the issue, this patch filters out unevictable LRU pages from the
reclaim_clean_pages_from_list in CMA.
ocfs2_dentry_attach_lock() can be executed in parallel threads against the
same dentry. Make that race safe. The race is like this:
thread A thread B
(A1) enter ocfs2_dentry_attach_lock,
seeing dentry->d_fsdata is NULL,
and no alias found by
ocfs2_find_local_alias, so kmalloc
a new ocfs2_dentry_lock structure
to local variable "dl", dl1
.....
(B1) enter ocfs2_dentry_attach_lock,
seeing dentry->d_fsdata is NULL,
and no alias found by
ocfs2_find_local_alias so kmalloc
a new ocfs2_dentry_lock structure
to local variable "dl", dl2.
......
(A2) set dentry->d_fsdata with dl1,
call ocfs2_dentry_lock() and increase
dl1->dl_lockres.l_ro_holders to 1 on
success.
......
(B2) set dentry->d_fsdata with dl2
call ocfs2_dentry_lock() and increase
dl2->dl_lockres.l_ro_holders to 1 on
success.
......
(A3) call ocfs2_dentry_unlock()
and decrease
dl2->dl_lockres.l_ro_holders to 0
on success.
....
(B3) call ocfs2_dentry_unlock(),
decreasing
dl2->dl_lockres.l_ro_holders, but
see it's zero now, panic
Link: http://lkml.kernel.org/r/20190529174636.22364-1-wen.gang.wang@oracle.com Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reported-by: Daniel Sobe <daniel.sobe@nxp.com> Tested-by: Daniel Sobe <daniel.sobe@nxp.com> Reviewed-by: Changwei Ge <gechangwei@live.cn> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We've received a bugreport that using LPM with ST1000LM024 drives leads
to system lockups. So it seems that these models are buggy in more then
1 way. Add NOLPM quirk to the existing quirks entry for BROKEN_FPDMA_AA.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1571330 Cc: stable@vger.kernel.org Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stanton SCS.1m can transfer isochronous packet with Multi Bit Linear
Audio data channels, therefore it allows software to capture PCM
substream. However, ALSA oxfw driver doesn't.
This commit changes the driver to add one PCM substream for capture
direction.
The Bluetooth interface of the 2nd-gen Intuos Pro batches together four
independent "frames" of finger data into a single report. Each frame
is essentially equivalent to a single USB report, with the up-to-10
fingers worth of information being spread across two frames. At the
moment the driver only calls `input_sync` after processing all four
frames have been processed, which can result in the driver sending
multiple updates for a single slot within the same SYN_REPORT. This
can confuse userspace, so modify the driver to sync more often if
necessary (i.e., after reporting the state of all fingers).
Fixes: 4922cd26f03c ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface") Cc: <stable@vger.kernel.org> # 4.11+ Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The button numbering of the 2nd-gen Intuos Pro is not consistent between
the USB and Bluetooth interfaces. Over USB, the HID_GENERIC codepath
enumerates the eight ExpressKeys first (BTN_0 - BTN_7) followed by the
center modeswitch button (BTN_8). The Bluetooth codepath, however, has
the center modeswitch button as BTN_0 and the the eight ExpressKeys as
BTN_1 - BTN_8. To ensure userspace button mappings do not change
depending on how the tablet is connected, modify the Bluetooth codepath
to report buttons in the same order as USB.
To ensure the mode switch LED continues to toggle in response to the
mode switch button, the `wacom_is_led_toggled` function also requires
a small update.
Link: https://github.com/linuxwacom/input-wacom/pull/79 Fixes: 4922cd26f03c ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface") Cc: <stable@vger.kernel.org> # 4.11+ Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Skomra <aaron.skomra@wacom.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Bluetooth reports from the 2nd-gen Intuos Pro have separate bits for
indicating if the tip or eraser is in contact with the tablet. At the
moment, only the tip contact bit controls the state of the BTN_TOUCH
event. This prevents the eraser from working as expected. This commit
changes the driver to send BTN_TOUCH whenever either the tip or eraser
contact bit is set.
Fixes: 4922cd26f03c ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface") Cc: <stable@vger.kernel.org> # 4.11+ Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Skomra <aaron.skomra@wacom.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the tool spends some time in prox before entering range, a series of
events (e.g. ABS_DISTANCE, MSC_SERIAL) can be sent before we or userspace
have any clue about the pen whose data is being reported. We need to hold
off on reporting anything until the pen has entered range. Since we still
want to report events that occur "in prox" after the pen has *left* range
we use 'wacom-tool[0]' as the indicator that the pen did at one point
enter range and provide us/userspace with tool type and serial number
information.
Fixes: a48324de6d4d ("HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range") Cc: <stable@vger.kernel.org> # 4.11+ Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The serial number and tool type information that is reported by the tablet
while a pen is merely "in prox" instead of fully "in range" can be stale
and cause us to report incorrect tool information. Serial number, tool
type, and other information is only valid once the pen comes fully in range
so we should be careful to not use this information until that point.
In particular, this issue may cause the driver to incorectly report
BTN_TOOL_RUBBER after switching from the eraser tool back to the pen.
Fixes: a48324de6d4d ("HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range") Cc: <stable@vger.kernel.org> # 4.11+ Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since kernel v5.0, one single win8 touchscreen device failed.
And it turns out this is because it reports 2 InRange usage per touch.
It's a first, and I *really* wonder how this was allowed by Microsoft in
the first place. But IIRC, Breno told me this happened *after* a firmware
upgrade...
Anyway, better be safe for those crappy devices, and make sure we have
a full slot before jumping to the next.
This won't prevent all crappy devices to fail here, but at least we will
have a safeguard as long as the contact ID and the X and Y coordinates
are placed in the report after the grabage.
Fixes: 01eaac7e5713 ("HID: multitouch: remove one copy of values") CC: stable@vger.kernel.org # v5.0+ Reported-and-tested-by: Breno Leitao <leitao@debian.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This does not happend upstream as the offending code got removed in: bed2dd8421 ("drm/ttm: Quick-test mmap offset in ttm_bo_mmap()")
Fix that by adding check for CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT around
the drm_legacy_mmap() call.
Also, as Sven Joachim pointed out, we need to make the check in
CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=n case return -EINVAL as its done
for basically all other gpu drivers, especially in upstream kernels
drivers/gpu/drm/ttm/ttm_bo_vm.c as of the upstream commit bed2dd8421.
NOTE. This is a minimal stable-only fix for trees where b30a43ac7132 is
backported as the build error affects nouveau only.
Fixes: b30a43ac7132 ("drm/nouveau: add kconfig option to turn off nouveau
legacy contexts. (v3)") Signed-off-by: Thomas Backlund <tmb@mageia.org> Cc: stable@vger.kernel.org Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sven Joachim <svenjoac@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There was a nouveau DDX that relied on legacy context ioctls to work,
but we fixed it years ago, give distros that have a modern DDX the
option to break the uAPI and close the mess of holes that legacy
context support is.
The context functions are not used by the i915 driver and should not
be used by modeset drivers. These driver functions contain several bugs
and security holes. This change makes these functions optional can be
turned on by a setting, they are turned off by default for modeset
driver with the exception of the nouvea driver that may require them with
an old version of libdrm.
Revert "drm: mark context support as a legacy subsystem"
v2: remove returns from void function, and formatting (Daniel Vetter)
v3:
- s/Nova/nouveau/ in the commit message, and add references to the
previous attempts
- drop the part touching the drm hw lock, that should be a separate
patch.
Signed-off-by: Peter Antoine <peter.antoine@intel.com> (v2) Cc: Peter Antoine <peter.antoine@intel.com> (v2) Reviewed-by: Peter Antoine <peter.antoine@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
v2: move DRM_VM dependency into legacy config.
v3: fix missing dep (kbuild robot)
Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some TCP peers announce a very small MSS option in their SYN and/or
SYN/ACK messages.
This forces the stack to send packets with a very high network/cpu
overhead.
Linux has enforced a minimal value of 48. Since this value includes
the size of TCP options, and that the options can consume up to 40
bytes, this means that each segment can include only 8 bytes of payload.
In some cases, it can be useful to increase the minimal value
to a saner value.
We still let the default to 48 (TCP_MIN_SND_MSS), for compatibility
reasons.
Note that TCP_MAXSEG socket option enforces a minimal value
of (TCP_MIN_MSS). David Miller increased this minimal value
in commit c39508d6f118 ("tcp: Make TCP_MAXSEG minimum more correct.")
from 64 to 88.
We might in the future merge TCP_MIN_SND_MSS and TCP_MIN_MSS.
CVE-2019-11479 -- tcp mss hardcoded to 48
Signed-off-by: Eric Dumazet <edumazet@google.com> Suggested-by: Jonathan Looney <jtl@netflix.com> Acked-by: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Bruce Curtis <brucec@netflix.com> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan Looney reported that a malicious peer can force a sender
to fragment its retransmit queue into tiny skbs, inflating memory
usage and/or overflow 32bit counters.
TCP allows an application to queue up to sk_sndbuf bytes,
so we need to give some allowance for non malicious splitting
of retransmit queue.
A new SNMP counter is added to monitor how many times TCP
did not allow to split an skb if the allowance was exceeded.
Note that this counter might increase in the case applications
use SO_SNDBUF socket option to lower sk_sndbuf.
CVE-2019-11478 : tcp_fragment, prevent fragmenting a packet when the
socket is already using more than half the allowed space
Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jonathan Looney <jtl@netflix.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Tyler Hicks <tyhicks@canonical.com> Cc: Bruce Curtis <brucec@netflix.com> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan Looney reported that TCP can trigger the following crash
in tcp_shifted_skb() :
BUG_ON(tcp_skb_pcount(skb) < pcount);
This can happen if the remote peer has advertized the smallest
MSS that linux TCP accepts : 48
An skb can hold 17 fragments, and each fragment can hold 32KB
on x86, or 64KB on PowerPC.
This means that the 16bit witdh of TCP_SKB_CB(skb)->tcp_gso_segs
can overflow.
Note that tcp_sendmsg() builds skbs with less than 64KB
of payload, so this problem needs SACK to be enabled.
SACK blocks allow TCP to coalesce multiple skbs in the retransmit
queue, thus filling the 17 fragments to maximal capacity.
CVE-2019-11477 -- u16 overflow of TCP_SKB_CB(skb)->tcp_gso_segs
Fixes: 832d11c5cd07 ("tcp: Try to restore large SKBs while SACK processing") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jonathan Looney <jtl@netflix.com> Acked-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Tyler Hicks <tyhicks@canonical.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Bruce Curtis <brucec@netflix.com> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The call of unsubscribe_port() which manages the group count and
module refcount from delete_and_unsubscribe_port() looks racy; it's
not covered by the group list lock, and it's likely a cause of the
reported unbalance at port deletion. Let's move the call inside the
group list_mutex to plug the hole.
Async update callbacks are expected to set the old_fb in the new_state
so prepare/cleanup framebuffers are balanced.
Calling drm_atomic_set_fb_for_plane() (which gets a reference of the new
fb and put the old fb) is not required, as it's taken care by
drm_mode_cursor_universal() when calling drm_atomic_helper_update_plane().
Cc: <stable@vger.kernel.org> # v4.19+ Fixes: 539c320bfa97 ("drm/vc4: update cursors asynchronously through atomic") Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-5-helen.koike@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Overlay file f_pos is the master copy that is preserved
through copy up and modified on read/write, but only real
fs knows how to SEEK_HOLE/SEEK_DATA and real fs may impose
limitations that are more strict than ->s_maxbytes for specific
files, so we use the real file to perform seeks.
We do not call real fs for SEEK_CUR:0 query and for SEEK_SET:0
requests.
We found that it return success when we set IMMUTABLE_FL flag to a file in
docker even though the docker didn't have the capability
CAP_LINUX_IMMUTABLE.
The commit d1d04ef8572b ("ovl: stack file ops") and dab5ca8fd9dd ("ovl: add
lsattr/chattr support") implemented chattr operations on a regular overlay
file. ovl_real_ioctl() overridden the current process's subjective
credentials with ofs->creator_cred which have the capability
CAP_LINUX_IMMUTABLE so that it will return success in
vfs_ioctl()->cap_capable().
Fix this by checking the capability before cred overridden. And here we
only care about APPEND_FL and IMMUTABLE_FL, so get these information from
inode.
[SzM: move check and call to underlying fs inside inode locked region to
prevent two such calls from racing with each other]
Sven reports:
Commit 1e07d63749 ("drm/nouveau: add kconfig option to turn off nouveau
legacy contexts. (v3)") has caused a build failure for me when I
actually tried that option (CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=n):
,----
| Kernel: arch/x86/boot/bzImage is ready (#1)
| Building modules, stage 2.
| MODPOST 290 modules
| ERROR: "drm_legacy_mmap" [drivers/gpu/drm/nouveau/nouveau.ko] undefined!
| scripts/Makefile.modpost:91: recipe for target '__modpost' failed
`----
Upstream does not have that problem, as commit bed2dd8421 ("drm/ttm:
Quick-test mmap offset in ttm_bo_mmap()") has removed the use of
drm_legacy_mmap from nouveau_ttm.c. Unfortunately that commit does not
apply in 5.1.9.
The ensuing discussion proposed a number of one-off patches, but no
solid agreement was made, so just revert the commit for now to get
people's systems building again.
Reported-by: Sven Joachim <svenjoac@gmx.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Thomas Backlund <tmb@mageia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lots of people have reported issues with this patch, and as there does
not seem to be a fix going into Linus's kernel tree any time soon,
revert the commit in the stable trees so as to get people's machines
working properly again.
Reported-by: Vasily Khoruzhick <anarsoul@gmail.com> Reported-by: Hans de Goede <hdegoede@redhat.com> Cc: Jeremy Cline <jeremy@jcline.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pcpu_find_block_fit() guarantees that a fit is found within
PCPU_BITMAP_BLOCK_BITS. Iteration is used to determine the first fit as
it compares against the block's contig_hint. This can lead to
incorrectly scanning past the end of the bitmap. The behavior was okay
given the check after for bit_off >= end and the correctness of the
hints from pcpu_find_block_fit().
This patch fixes this by bounding the end offset by the number of bits
in a chunk.
Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The datasheet says the vconn MUST be off when we start toggling. The
tcpm.c state-machine is responsible to make sure vconn is off, but lets
add a WARN to catch any cases where vconn is not off for some reason.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
During early system resume on Exynos5422 with performance counters enabled
the following kernel oops happens:
Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1433 Comm: bash Tainted: G W 5.0.0-rc5-next-20190208-00023-gd5fb5a8a13e6-dirty #5480
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
...
Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: 4451006a DAC: 00000051
Process bash (pid: 1433, stack limit = 0xb7e0e22f)
...
(reset_ctrl_regs) from [<c0112ad0>] (dbg_cpu_pm_notify+0x1c/0x24)
(dbg_cpu_pm_notify) from [<c014c840>] (notifier_call_chain+0x44/0x84)
(notifier_call_chain) from [<c014cbc0>] (__atomic_notifier_call_chain+0x7c/0x128)
(__atomic_notifier_call_chain) from [<c01ffaac>] (cpu_pm_notify+0x30/0x54)
(cpu_pm_notify) from [<c055116c>] (syscore_resume+0x98/0x3f4)
(syscore_resume) from [<c0189350>] (suspend_devices_and_enter+0x97c/0xe74)
(suspend_devices_and_enter) from [<c0189fb8>] (pm_suspend+0x770/0xc04)
(pm_suspend) from [<c0187740>] (state_store+0x6c/0xcc)
(state_store) from [<c09fa698>] (kobj_attr_store+0x14/0x20)
(kobj_attr_store) from [<c030159c>] (sysfs_kf_write+0x4c/0x50)
(sysfs_kf_write) from [<c0300620>] (kernfs_fop_write+0xfc/0x1e0)
(kernfs_fop_write) from [<c0282be8>] (__vfs_write+0x2c/0x160)
(__vfs_write) from [<c0282ea4>] (vfs_write+0xa4/0x16c)
(vfs_write) from [<c0283080>] (ksys_write+0x40/0x8c)
(ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
Undefined instruction is triggered during CP14 reset, because bits: #16
(Secure privileged invasive debug disabled) and #17 (Secure privileged
noninvasive debug disable) are set in DSCR. Those bits depend on SPNIDEN
and SPIDEN lines, which are provided by Secure JTAG hardware block. That
block in turn is powered from cluster 0 (big/Eagle), but the Exynos5422
boots on cluster 1 (LITTLE/KFC).
To fix this issue it is enough to turn on the power on the cluster 0 for
a while. This lets the Secure JTAG block to propagate the needed signals
to LITTLE/KFC cores and change their DSCR.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The sysfs unexport in pwmchip_remove() is completely asymmetric
to what we do in pwmchip_add_with_polarity() and commit 0733424c9ba9
("pwm: Unexport children before chip removal") is a strong indication
that this was wrong to begin with. We should just move
pwmchip_sysfs_unexport() where it belongs, which is right after
pwmchip_sysfs_unexport_children(). In that case, we do not need
separate functions anymore either.
We also really want to remove sysfs irrespective of whether or not
the chip will be removed as a result of pwmchip_remove(). We can only
assume that the driver will be gone after that, so we shouldn't leave
any dangling sysfs files around.
This warning disappears if we move pwmchip_sysfs_unexport() to
the top of pwmchip_remove(), pwmchip_sysfs_unexport_children().
That way it is also outside of the pwm_lock section, which indeed
doesn't seem to be needed.
Moving the pwmchip_sysfs_export() call outside of that section also
seems fine and it'd be perfectly symmetric with pwmchip_remove() again.
So, this patch fixes them.
Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com>
[shimoda: revise the commit log and code] Fixes: 76abbdde2d95 ("pwm: Add sysfs interface") Fixes: 0733424c9ba9 ("pwm: Unexport children before chip removal") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Hoan Nguyen An <na-hoan@jinso.co.jp> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The PVDD_APIO_1V8 (LDO2) and PVDD_ABB_1V8 (LDO8) regulators were turned
off by Linux kernel as unused. However they supply critical parts of
SoC so they should be always on:
1. PVDD_APIO_1V8 supplies SYS pins (gpx[0-3], PSHOLD), HDMI level shift,
RTC, VDD1_12 (DRAM internal 1.8 V logic), pull-up for PMIC interrupt
lines, TTL/UARTR level shift, reset pins and SW-TACT1 button.
It also supplies unused blocks like VDDQ_SRAM (for SROM controller) and
VDDQ_GPIO (gpm7, gpy7).
The LDO2 cannot be turned off (S2MPS11 keeps it on anyway) so
marking it "always-on" only reflects its real status.
2. PVDD_ABB_1V8 supplies Adaptive Body Bias Generator for ARM cores,
memory and Mali (G3D).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It must be made sure that immediate mode is not already set, when
modifying shadow register value in ehrpwm_pwm_disable(). Otherwise
modifications to the action-qualifier continuous S/W force
register(AQSFRC) will be done in the active register.
This may happen when both channels are being disabled. In this case,
only the first channel state will be recorded as disabled in the shadow
register. Later, when enabling the first channel again, the second
channel would be enabled as well. Setting RLDCSF to zero, first, ensures
that the shadow register is updated as desired.
Fixes: 38dabd91ff0b ("pwm: tiehrpwm: Fix disabling of output of PWMs") Signed-off-by: Christoph Vogtländer <c.vogtlaender@sigma-surface-science.com>
[vigneshr@ti.com: Improve commit message] Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Intel IOMMU, when enabled, tries to find the domain of the device,
assuming it's a PCI one, during DMA operations, such as mapping or
unmapping. Since we are splitting the actual PCI device to couple of
children via MFD framework (see drivers/mfd/intel-lpss.c for details),
the DMA device appears to be a platform one, and thus not an actual one
that performs DMA. In a such situation IOMMU can't find or allocate
a proper domain for its operations. As a result, all DMA operations are
failed.
In order to fix this, supply parent of the platform device
to the DMA engine framework and fix filter functions accordingly.
We may rely on the fact that parent is a real PCI device, because no
other configuration is present in the wild.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [for tty parts] Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently we aren't checking for the ICE_FC_NONE case for the current
flow control mode. This is causing "Unknown" to be printed for the
current flow control method if flow control is disabled. Fix this by
adding the case for ICE_FC_NONE to print "None".
Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We are currently assuming all GPIOs are non-wakeup capable GPIOs as we
not configuring the bank->non_wakeup_gpios like we used to earlier with
platform_data.
Let's add omap_gpio_is_off_wakeup_capable() to make the handling clearer
while considering that later patches may want to configure SoC specific
bank->non_wakeup_gpios for the GPIOs in wakeup domain.
Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If a sync bfq_queue has a higher weight than some other queue, and
remains temporarily empty while in service, then, to preserve the
bandwidth share of the queue, it is necessary to plug I/O dispatching
until a new request arrives for the queue. In addition, a timeout
needs to be set, to avoid waiting for ever if the process associated
with the queue has actually finished its I/O.
Even with the above timeout, the device is however not fed with new
I/O for a while, if the process has finished its I/O. If this happens
often, then throughput drops and latencies grow. For this reason, the
timeout is kept rather low: 8 ms is the current default.
Unfortunately, such a low value may cause, on the opposite end, a
violation of bandwidth guarantees for a process that happens to issue
new I/O too late. The higher the system load, the higher the
probability that this happens to some process. This is a problem in
scenarios where service guarantees matter more than throughput. One
important case are weight-raised queues, which need to be granted a
very high fraction of the bandwidth.
To address this issue, this commit lower-bounds the plugging timeout
for weight-raised queues to 20 ms. This simple change provides
relevant benefits. For example, on a PLEXTOR PX-256M5S, with which
gnome-terminal starts in 0.6 seconds if there is no other I/O in
progress, the same applications starts in
- 0.8 seconds, instead of 1.2 seconds, if ten files are being read
sequentially in parallel
- 1 second, instead of 2 seconds, if, in parallel, five files are
being read sequentially, and five more files are being written
sequentially
Driver maintains state machine for processing and completing switch
commands. This patch resets FCF_ASYNC_{SENT|ACTIVE} flag to indicate if the
previous command is active or sent, in order for next GPSC command to
advance the state machine.
[mkp: commit desc typo]
Signed-off-by: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The MSI message address in the RC address space can be 64 bit. The
R-Car PCIe RC supports such a 64bit MSI message address as well.
The code currently uses virt_to_phys(__get_free_pages()) to obtain
a reserved page for the MSI message address, and the return value
of which can be a 64 bit physical address on 64 bit system.
However, the driver only programs PCIEMSIALR register with the bottom
32 bits of the virt_to_phys(__get_free_pages()) return value and does
not program the top 32 bits into PCIEMSIAUR, but rather programs the
PCIEMSIAUR register with 0x0. This worked fine on older 32 bit R-Car
SoCs, however may fail on new 64 bit R-Car SoCs.
Since from a PCIe controller perspective, an inbound MSI is a memory
write to a special address (in case of this controller, defined by
the value in PCIEMSIAUR:PCIEMSIALR), which triggers an interrupt, but
never hits the DRAM _and_ because allocation of an MSI by a PCIe card
driver obtains the MSI message address by reading PCIEMSIAUR:PCIEMSIALR
in rcar_msi_setup_irqs(), incorrectly programmed PCIEMSIAUR cannot
cause memory corruption or other issues.
There is however the possibility that if virt_to_phys(__get_free_pages())
returned address above the 32bit boundary _and_ PCIEMSIAUR was programmed
to 0x0 _and_ if the system had physical RAM at the address matching the
value of PCIEMSIALR, a PCIe card driver could allocate a buffer with a
physical address matching the value of PCIEMSIALR and a remote write to
such a buffer by a PCIe card would trigger a spurious MSI.
Fixes: e015f88c368d ("PCI: rcar: Add support for R-Car H3 to pcie-rcar") Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: linux-renesas-soc@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
When set 2 same MAC to different function of one port, IMP
will return error as the later one may modify the origin one.
This will cause bond fail for 2 VFs of one port.
Driver just print warning and return 0 with this patch, so
if set same MAC address, it will return 0 but do not really
configure HW.
Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Call order on probe():
- max14656_hw_init() enables interrupts on the chip
- devm_request_irq() starts processing interrupts, isr
could be called immediately
- isr: schedules delayed work (irq_work)
- irq_work: calls power_supply_changed()
- devm_power_supply_register() registers the power supply
Depending on timing, it's possible that power_supply_changed()
is called on an unregistered power supply structure.
Fix by registering the power supply before requesting the irq.
Cc: Alexander Kurz <akurz@blala.de> Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This area is used to store keys by HSPPA in case of AM438x SOC. Leave it
active.
Signed-off-by: Kabir Sahane <x0153567@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
The input color space for the plane was previously ignored even if it
was set.
If a limited range YUV format was given to DC then the
wrong color transformation matrix was being used since DC assumed that
it was full range instead.
[How]
Respect the given color_space format for the plane if it isn't
COLOR_SPACE_UNKNOWN. Otherwise, use the implicit default since DM
didn't specify.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The find_dlpar_node() helper returns a device node with its reference
incremented. Both the add and remove paths use this helper for find the
appropriate node, but fail to release the reference when done.
Annotate the find_dlpar_node() helper with a comment about the incremented
reference count and call of_node_put() on the obtained device_node in the
add and remove paths. Also, fixup a reference leak in the find_vio_slot()
helper where we fail to call of_node_put() on the vdevice node after we
iterate over its children.
Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6QDL_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality(this at least
breaks RAVE SP serdev driver on RDU2). Fix the code to specify
IMX6QDL_CLK_IPG as "ipg" clock for SDMA, to avoid detecting incorrect
clock ratio.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Cc: Angus Ainslie (Purism) <angus@akkea.ca> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Tested-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6SX_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX6SX_CLK_IPG as "ipg" clock for SDMA, to avoid detecting
incorrect clock ratio.
Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6UL_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX6UL_CLK_IPG as "ipg" clock for SDMA, to avoid detecting
incorrect clock ratio.
Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX7D_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX7D_CLK_IPG as "ipg" clock for SDMA, to avoid detecting
incorrect clock ratio.
Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6SLL_CLK_SDMA result in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX6SLL_CLK_IPG as "ipg" clock for SDMA, to avoid detecting
incorrect clock ratio.
Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6SL_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX6SL_CLK_AHB as "ahb" clock for SDMA, to avoid detecting
incorrect clock ratio.
Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX5_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX5_CLK_AHB as "ahb" clock for SDMA, to avoid detecting
incorrect clock ratio.