Dave Martin [Fri, 12 Apr 2019 14:30:58 +0000 (15:30 +0100)]
KVM: arm/arm64: Demote kvm_arm_init_arch_resources() to just set up SVE
The introduction of kvm_arm_init_arch_resources() looks like
premature factoring, since nothing else uses this hook yet and it
is not clear what will use it in the future.
For now, let's not pretend that this is a general thing:
This patch simply renames the function to kvm_arm_init_sve(),
retaining the arm stub version under the new name.
Suggested-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Thu, 11 Apr 2019 15:53:18 +0000 (16:53 +0100)]
arm64/sve: Clarify vq map semantics
Currently the meanings of sve_vq_map and the ancillary helpers
__bit_to_vq() and __vq_to_bit() are not clearly explained.
This patch makes the explanatory comment clearer, and removes the
duplicate comment from fpsimd.h.
The WARN_ON() currently present in __bit_to_vq() confuses the
intended use of this helper. Since these are low-level helpers not
intended for general-purpose use anyway, it is better not to make
guesses about how these functions will be used: rather, this patch
removes the WARN_ON() and relies on callers to use the helpers
sensibly.
Suggested-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Tue, 2 Apr 2019 02:28:39 +0000 (03:28 +0100)]
arm64: KVM: Fix system register enumeration
The introduction of the SVE registers to userspace started with a
refactoring of the way we expose any register via the ONE_REG
interface.
Unfortunately, this change doesn't exactly behave as expected
if the number of registers is non-zero and consider everything
to be an error. The visible result is that QEMU barfs very early
when creating vcpus.
Make sure we only exit early in case there is an actual error, rather
than a positive number of registers...
Fixes: be25bbb392fa ("KVM: arm64: Factor out core register ID enumeration") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Tue, 15 Jan 2019 17:02:08 +0000 (17:02 +0000)]
KVM: Document errors for KVM_GET_ONE_REG and KVM_SET_ONE_REG
KVM_GET_ONE_REG and KVM_SET_ONE_REG return some error codes that
are not documented (but hopefully not surprising either). To give
an indication of what these may mean, this patch adds brief
documentation.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Tue, 15 Jan 2019 12:21:22 +0000 (12:21 +0000)]
KVM: arm64: Add a capability to advertise SVE support
To provide a uniform way to check for KVM SVE support amongst other
features, this patch adds a suitable capability KVM_CAP_ARM_SVE,
and reports it as present when SVE is available.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Thu, 28 Feb 2019 18:56:50 +0000 (18:56 +0000)]
KVM: arm64/sve: Allow userspace to enable SVE for vcpus
Now that all the pieces are in place, this patch offers a new flag
KVM_ARM_VCPU_SVE that userspace can pass to KVM_ARM_VCPU_INIT to
turn on SVE for the guest, on a per-vcpu basis.
As part of this, support for initialisation and reset of the SVE
vector length set and registers is added in the appropriate places,
as well as finally setting the KVM_ARM64_GUEST_HAS_SVE vcpu flag,
to turn on the SVE support code.
Allocation of the SVE register storage in vcpu->arch.sve_state is
deferred until the SVE configuration is finalized, by which time
the size of the registers is known.
Setting the vector lengths supported by the vcpu is considered
configuration of the emulated hardware rather than runtime
configuration, so no support is offered for changing the vector
lengths available to an existing vcpu across reset.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Thu, 28 Feb 2019 18:46:44 +0000 (18:46 +0000)]
KVM: arm64/sve: Add pseudo-register for the guest's vector lengths
This patch adds a new pseudo-register KVM_REG_ARM64_SVE_VLS to
allow userspace to set and query the set of vector lengths visible
to the guest.
In the future, multiple register slices per SVE register may be
visible through the ioctl interface. Once the set of slices has
been determined we would not be able to allow the vector length set
to be changed any more, in order to avoid userspace seeing
inconsistent sets of registers. For this reason, this patch adds
support for explicit finalization of the SVE configuration via the
KVM_ARM_VCPU_FINALIZE ioctl.
Finalization is the proper place to allocate the SVE register state
storage in vcpu->arch.sve_state, so this patch adds that as
appropriate. The data is freed via kvm_arch_vcpu_uninit(), which
was previously a no-op on arm64.
To simplify the logic for determining what vector lengths can be
supported, some code is added to KVM init to work this out, in the
kvm_arm_init_arch_resources() hook.
The KVM_REG_ARM64_SVE_VLS pseudo-register is not exposed yet.
Subsequent patches will allow SVE to be turned on for guest vcpus,
making it visible.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Wed, 19 Dec 2018 14:27:01 +0000 (14:27 +0000)]
KVM: arm/arm64: Add KVM_ARM_VCPU_FINALIZE ioctl
Some aspects of vcpu configuration may be too complex to be
completed inside KVM_ARM_VCPU_INIT. Thus, there may be a
requirement for userspace to do some additional configuration
before various other ioctls will work in a consistent way.
In particular this will be the case for SVE, where userspace will
need to negotiate the set of vector lengths to be made available to
the guest before the vcpu becomes fully usable.
In order to provide an explicit way for userspace to confirm that
it has finished setting up a particular vcpu feature, this patch
adds a new ioctl KVM_ARM_VCPU_FINALIZE.
When userspace has opted into a feature that requires finalization,
typically by means of a feature flag passed to KVM_ARM_VCPU_INIT, a
matching call to KVM_ARM_VCPU_FINALIZE is now required before
KVM_RUN or KVM_GET_REG_LIST is allowed. Individual features may
impose additional restrictions where appropriate.
No existing vcpu features are affected by this, so current
userspace implementations will continue to work exactly as before,
with no need to issue KVM_ARM_VCPU_FINALIZE.
As implemented in this patch, KVM_ARM_VCPU_FINALIZE is currently a
placeholder: no finalizable features exist yet, so ioctl is not
required and will always yield EINVAL. Subsequent patches will add
the finalization logic to make use of this ioctl for SVE.
No functional change for existing userspace.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Thu, 28 Feb 2019 18:33:00 +0000 (18:33 +0000)]
KVM: arm/arm64: Add hook for arch-specific KVM initialisation
This patch adds a kvm_arm_init_arch_resources() hook to perform
subarch-specific initialisation when starting up KVM.
This will be used in a subsequent patch for global SVE-related
setup on arm64.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
KVM will need to interrogate the set of SVE vector lengths
available on the system.
This patch exposes the relevant bits to the kernel, along with a
sve_vq_available() helper to check whether a particular vector
length is supported.
__vq_to_bit() and __bit_to_vq() are not intended for use outside
these functions: now that these are exposed outside fpsimd.c, they
are prefixed with __ in order to provide an extra hint that they
are not intended for general-purpose use.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Fri, 28 Sep 2018 13:39:20 +0000 (14:39 +0100)]
KVM: arm64: Enumerate SVE register indices for KVM_GET_REG_LIST
This patch includes the SVE register IDs in the list returned by
KVM_GET_REG_LIST, as appropriate.
On a non-SVE-enabled vcpu, no new IDs are added.
On an SVE-enabled vcpu, IDs for the FPSIMD V-registers are removed
from the list, since userspace is required to access the Z-
registers instead in order to access the V-register content. For
the variably-sized SVE registers, the appropriate set of slice IDs
are enumerated, depending on the maximum vector length for the
vcpu.
As it currently stands, the SVE architecture never requires more
than one slice to exist per register, so this patch adds no
explicit support for enumerating multiple slices. The code can be
extended straightforwardly to support this in the future, if
needed.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Fri, 28 Sep 2018 13:39:19 +0000 (14:39 +0100)]
KVM: arm64/sve: Add SVE support to register access ioctl interface
This patch adds the following registers for access via the
KVM_{GET,SET}_ONE_REG interface:
* KVM_REG_ARM64_SVE_ZREG(n, i) (n = 0..31) (in 2048-bit slices)
* KVM_REG_ARM64_SVE_PREG(n, i) (n = 0..15) (in 256-bit slices)
* KVM_REG_ARM64_SVE_FFR(i) (in 256-bit slices)
In order to adapt gracefully to future architectural extensions,
the registers are logically divided up into slices as noted above:
the i parameter denotes the slice index.
This allows us to reserve space in the ABI for future expansion of
these registers. However, as of today the architecture does not
permit registers to be larger than a single slice, so no code is
needed in the kernel to expose additional slices, for now. The
code can be extended later as needed to expose them up to a maximum
of 32 slices (as carved out in the architecture itself) if they
really exist someday.
The registers are only visible for vcpus that have SVE enabled.
They are not enumerated by KVM_GET_REG_LIST on vcpus that do not
have SVE.
Accesses to the FPSIMD registers via KVM_REG_ARM_CORE is not
allowed for SVE-enabled vcpus: SVE-aware userspace can use the
KVM_REG_ARM64_SVE_ZREG() interface instead to access the same
register state. This avoids some complex and pointless emulation
in the kernel to convert between the two views of these aliased
registers.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Tue, 11 Dec 2018 20:31:08 +0000 (20:31 +0000)]
KVM: arm64: Reject ioctl access to FPSIMD V-regs on SVE vcpus
In order to avoid the pointless complexity of maintaining two ioctl
register access views of the same data, this patch blocks ioctl
access to the FPSIMD V-registers on vcpus that support SVE.
This will make it more straightforward to add SVE register access
support.
Since SVE is an opt-in feature for userspace, this will not affect
existing users.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Fri, 15 Mar 2019 15:47:04 +0000 (15:47 +0000)]
KVM: arm64: Factor out core register ID enumeration
In preparation for adding logic to filter out some KVM_REG_ARM_CORE
registers from the KVM_GET_REG_LIST output, this patch factors out
the core register enumeration into a separate function and rebuilds
num_core_regs() on top of it.
This may be a little more expensive (depending on how good a job
the compiler does of specialising the code), but KVM_GET_REG_LIST
is not a hot path.
This will make it easier to consolidate ID filtering code in one
place.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Fri, 28 Sep 2018 13:39:18 +0000 (14:39 +0100)]
KVM: Allow 2048-bit register access via ioctl interface
The Arm SVE architecture defines registers that are up to 2048 bits
in size (with some possibility of further future expansion).
In order to avoid the need for an excessively large number of
ioctls when saving and restoring a vcpu's registers, this patch
adds a #define to make support for individual 2048-bit registers
through the KVM_{GET,SET}_ONE_REG ioctl interface official. This
will allow each SVE register to be accessed in a single call.
There are sufficient spare bits in the register id size field for
this change, so there is no ABI impact, providing that
KVM_GET_REG_LIST does not enumerate any 2048-bit register unless
userspace explicitly opts in to the relevant architecture-specific
features.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Fri, 28 Sep 2018 13:39:17 +0000 (14:39 +0100)]
KVM: arm64/sve: Context switch the SVE registers
In order to give each vcpu its own view of the SVE registers, this
patch adds context storage via a new sve_state pointer in struct
vcpu_arch. An additional member sve_max_vl is also added for each
vcpu, to determine the maximum vector length visible to the guest
and thus the value to be configured in ZCR_EL2.LEN while the vcpu
is active. This also determines the layout and size of the storage
in sve_state, which is read and written by the same backend
functions that are used for context-switching the SVE state for
host tasks.
On SVE-enabled vcpus, SVE access traps are now handled by switching
in the vcpu's SVE context and disabling the trap before returning
to the guest. On other vcpus, the trap is not handled and an exit
back to the host occurs, where the handle_sve() fallback path
reflects an undefined instruction exception back to the guest,
consistently with the behaviour of non-SVE-capable hardware (as was
done unconditionally prior to this patch).
No SVE handling is added on non-VHE-only paths, since VHE is an
architectural and Kconfig prerequisite of SVE.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Fri, 28 Sep 2018 13:39:16 +0000 (14:39 +0100)]
KVM: arm64/sve: System register context switch and access support
This patch adds the necessary support for context switching ZCR_EL1
for each vcpu.
ZCR_EL1 is trapped alongside the FPSIMD/SVE registers, so it makes
sense for it to be handled as part of the guest FPSIMD/SVE context
for context switch purposes instead of handling it as a general
system register. This means that it can be switched in lazily at
the appropriate time. No effort is made to track host context for
this register, since SVE requires VHE: thus the hosts's value for
this register lives permanently in ZCR_EL2 and does not alias the
guest's value at any time.
The Hyp switch and fpsimd context handling code is extended
appropriately.
Accessors are added in sys_regs.c to expose the SVE system
registers and ID register fields. Because these need to be
conditionally visible based on the guest configuration, they are
implemented separately for now rather than by use of the generic
system register helpers. This may be abstracted better later on
when/if there are more features requiring this model.
ID_AA64ZFR0_EL1 is RO-RAZ for MRS/MSR when SVE is disabled for the
guest, but for compatibility with non-SVE aware KVM implementations
the register should not be enumerated at all for KVM_GET_REG_LIST
in this case. For consistency we also reject ioctl access to the
register. This ensures that a non-SVE-enabled guest looks the same
to userspace, irrespective of whether the kernel KVM implementation
supports SVE.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Fri, 28 Sep 2018 13:39:15 +0000 (14:39 +0100)]
KVM: arm64: Support runtime sysreg visibility filtering
Some optional features of the Arm architecture add new system
registers that are not present in the base architecture.
Where these features are optional for the guest, the visibility of
these registers may need to depend on some runtime configuration,
such as a flag passed to KVM_ARM_VCPU_INIT.
For example, ZCR_EL1 and ID_AA64ZFR0_EL1 need to be hidden if SVE
is not enabled for the guest, even though these registers may be
present in the hardware and visible to the host at EL2.
Adding special-case checks all over the place for individual
registers is going to get messy as the number of conditionally-
visible registers grows.
In order to help solve this problem, this patch adds a new sysreg
method visibility() that can be used to hook in any needed runtime
visibility checks. This method can currently return
REG_HIDDEN_USER to inhibit enumeration and ioctl access to the
register for userspace, and REG_HIDDEN_GUEST to inhibit runtime
access by the guest using MSR/MRS. Wrappers are added to allow
these flags to be conveniently queried.
This approach allows a conditionally modified view of individual
system registers such as the CPU ID registers, in addition to
completely hiding register where appropriate.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Fri, 28 Sep 2018 13:39:13 +0000 (14:39 +0100)]
KVM: arm64: Propagate vcpu into read_id_reg()
Architecture features that are conditionally visible to the guest
will require run-time checks in the ID register accessor functions.
In particular, read_id_reg() will need to perform checks in order
to generate the correct emulated value for certain ID register
fields such as ID_AA64PFR0_EL1.SVE for example.
This patch propagates vcpu into read_id_reg() so that future
patches can add run-time checks on the guest configuration here.
For now, there is no functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Fri, 28 Sep 2018 13:39:12 +0000 (14:39 +0100)]
KVM: arm64: Add a vcpu flag to control SVE visibility for the guest
Since SVE will be enabled or disabled on a per-vcpu basis, a flag
is needed in order to track which vcpus have it enabled.
This patch adds a suitable flag and a helper for checking it.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Fri, 28 Sep 2018 13:39:11 +0000 (14:39 +0100)]
arm64/sve: Enable SVE state tracking for non-task contexts
The current FPSIMD/SVE context handling support for non-task (i.e.,
KVM vcpu) contexts does not take SVE into account. This means that
only task contexts can safely use SVE at present.
In preparation for enabling KVM guests to use SVE, it is necessary
to keep track of SVE state for non-task contexts too.
This patch adds the necessary support, removing assumptions from
the context switch code about the location of the SVE context
storage.
When binding a vcpu context, its vector length is arbitrarily
specified as SVE_VL_MIN for now. In any case, because TIF_SVE is
presently cleared at vcpu context bind time, the specified vector
length will not be used for anything yet. In later patches TIF_SVE
will be set here as appropriate, and the appropriate maximum vector
length for the vcpu will be passed when binding.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Julien Grall <julien.grall@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Fri, 28 Sep 2018 13:39:10 +0000 (14:39 +0100)]
arm64/sve: Check SVE virtualisability
Due to the way the effective SVE vector length is controlled and
trapped at different exception levels, certain mismatches in the
sets of vector lengths supported by different physical CPUs in the
system may prevent straightforward virtualisation of SVE at parity
with the host.
This patch analyses the extent to which SVE can be virtualised
safely without interfering with migration of vcpus between physical
CPUs, and rejects late secondary CPUs that would erode the
situation further.
It is left up to KVM to decide what to do with this information.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Thu, 6 Dec 2018 16:32:35 +0000 (16:32 +0000)]
arm64/sve: Clarify role of the VQ map maintenance functions
The roles of sve_init_vq_map(), sve_update_vq_map() and
sve_verify_vq_map() are highly non-obvious to anyone who has not dug
through cpufeatures.c in detail.
Since the way these functions interact with each other is more
important here than a full understanding of the cpufeatures code, this
patch adds comments to make the functions' roles clearer.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Reviewed-by: Julien Grall <julien.grall@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Fri, 28 Sep 2018 13:39:08 +0000 (14:39 +0100)]
KVM: arm64: Add missing #includes to kvm_host.h
kvm_host.h uses some declarations from other headers that are
currently included by accident, without an explicit #include.
This patch adds a few #includes that are clearly missing. Although
the header builds without them today, this should help to avoid
future surprises.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Fri, 28 Sep 2018 13:39:07 +0000 (14:39 +0100)]
KVM: arm64: Refactor kvm_arm_num_regs() for easier maintenance
kvm_arm_num_regs() adds together various partial register counts in
a freeform sum expression, which makes it harder than necessary to
read diffs that add, modify or remove a single term in the sum
(which is expected to the common case under maintenance).
This patch refactors the code to add the term one per line, for
maximum readability.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Fri, 28 Sep 2018 13:39:06 +0000 (14:39 +0100)]
KVM: arm64: Delete orphaned declaration for __fpsimd_enabled()
__fpsimd_enabled() no longer exists, but a dangling declaration has
survived in kvm_hyp.h.
This patch gets rid of it.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Fri, 28 Sep 2018 13:39:05 +0000 (14:39 +0100)]
arm64: fpsimd: Always set TIF_FOREIGN_FPSTATE on task state flush
This patch updates fpsimd_flush_task_state() to mirror the new
semantics of fpsimd_flush_cpu_state() introduced by commit d8ad71fa38a9 ("arm64: fpsimd: Fix TIF_FOREIGN_FPSTATE after
invalidating cpu regs"). Both functions now implicitly set
TIF_FOREIGN_FPSTATE to indicate that the task's FPSIMD state is not
loaded into the cpu.
As a side-effect, fpsimd_flush_task_state() now sets
TIF_FOREIGN_FPSTATE even for non-running tasks. In the case of
non-running tasks this is not useful but also harmless, because the
flag is live only while the corresponding task is running. This
function is not called from fast paths, so special-casing this for
the task == current case is not really worth it.
Compiler barriers previously present in restore_sve_fpsimd_context()
are pulled into fpsimd_flush_task_state() so that it can be safely
called with preemption enabled if necessary.
Explicit calls to set TIF_FOREIGN_FPSTATE that accompany
fpsimd_flush_task_state() calls and are now redundant are removed
as appropriate.
fpsimd_flush_task_state() is used to get exclusive access to the
representation of the task's state via task_struct, for the purpose
of replacing the state. Thus, the call to this function should
happen before manipulating fpsimd_state or sve_state etc. in
task_struct. Anomalous cases are reordered appropriately in order
to make the code more consistent, although there should be no
functional difference since these cases are protected by
local_bh_disable() anyway.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Julien Grall <julien.grall@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dave Martin [Fri, 28 Sep 2018 13:39:26 +0000 (14:39 +0100)]
KVM: Documentation: Document arm64 core registers in detail
Since the the sizes of individual members of the core arm64
registers vary, the list of register encodings that make sense is
not a simple linear sequence.
To clarify which encodings to use, this patch adds a brief list
to the documentation.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Linus Torvalds [Sun, 24 Mar 2019 20:41:37 +0000 (13:41 -0700)]
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Miscellaneous ext4 bug fixes for 5.1"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: prohibit fstrim in norecovery mode
ext4: cleanup bh release code in ext4_ind_remove_space()
ext4: brelse all indirect buffer in ext4_ind_remove_space()
ext4: report real fs size after failed resize
ext4: add missing brelse() in add_new_gdb_meta_bg()
ext4: remove useless ext4_pin_inode()
ext4: avoid panic during forced reboot
ext4: fix data corruption caused by unaligned direct AIO
ext4: fix NULL pointer dereference while journal is aborted
Linus Torvalds [Sun, 24 Mar 2019 18:42:10 +0000 (11:42 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
"Third more careful attempt for this set of fixes:
- Prevent a 32bit math overflow in the cpufreq code
- Fix a buffer overflow when scanning the cgroup2 cpu.max property
- A set of fixes for the NOHZ scheduler logic to prevent waking up
CPUs even if the capacity of the busy CPUs is sufficient along with
other tweaks optimizing the behaviour for asymmetric systems
(big/little)"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Skip LLC NOHZ logic for asymmetric systems
sched/fair: Tune down misfit NOHZ kicks
sched/fair: Comment some nohz_balancer_kick() kick conditions
sched/core: Fix buffer overflow in cgroup2 property cpu.max
sched/cpufreq: Fix 32-bit math overflow
Linus Torvalds [Sun, 24 Mar 2019 18:16:27 +0000 (11:16 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Thomas Gleixner:
"A larger set of perf updates.
Not all of them are strictly fixes, but that's solely the tip
maintainers fault as they let the timely -rc1 pull request fall
through the cracks for various reasons including travel. So I'm
sending this nevertheless because rebasing and distangling fixes and
updates would be a mess and risky as well. As of tomorrow, a strict
fixes separation is happening again. Sorry for the slip-up.
Kernel:
- Handle RECORD_MMAP vs. RECORD_MMAP2 correctly so different
consumers of the mmap event get what they requested.
Tools:
- A larger set of updates to perf record/report/scripts vs. time
stamp handling
- More Python3 fixups
- A pile of memory leak plumbing
- perf BPF improvements and fixes
- Finalize the perf.data directory storage"
[ Note: the kernel part is strictly a fix, the updates are purely to
tooling - Linus ]
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
perf bpf: Show more BPF program info in print_bpf_prog_info()
perf bpf: Extract logic to create program names from perf_event__synthesize_one_bpf_prog()
perf tools: Save bpf_prog_info and BTF of new BPF programs
perf evlist: Introduce side band thread
perf annotate: Enable annotation of BPF programs
perf build: Check what binutils's 'disassembler()' signature to use
perf bpf: Process PERF_BPF_EVENT_PROG_LOAD for annotation
perf symbols: Introduce DSO_BINARY_TYPE__BPF_PROG_INFO
perf feature detection: Add -lopcodes to feature-libbfd
perf top: Add option --no-bpf-event
perf bpf: Save BTF information as headers to perf.data
perf bpf: Save BTF in a rbtree in perf_env
perf bpf: Save bpf_prog_info information as headers to perf.data
perf bpf: Save bpf_prog_info in a rbtree in perf_env
perf bpf: Make synthesize_bpf_events() receive perf_session pointer instead of perf_tool
perf bpf: Synthesize bpf events with bpf_program__get_prog_info_linear()
bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump()
tools lib bpf: Introduce bpf_program__get_prog_info_linear()
perf record: Replace option --bpf-event with --no-bpf-event
perf tests: Fix a memory leak in test__perf_evsel__tp_sched_test()
...
Linus Torvalds [Sun, 24 Mar 2019 18:12:27 +0000 (11:12 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes:
- Prevent potential NULL pointer dereferences in the HPET and HyperV
code
- Exclude the GART aperture from /proc/kcore to prevent kernel
crashes on access
- Use the correct macros for Cyrix I/O on Geode processors
- Remove yet another kernel address printk leak
- Announce microcode reload completion as requested by quite some
people. Microcode loading has become popular recently.
- Some 'Make Clang' happy fixlets
- A few cleanups for recently added code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/gart: Exclude GART aperture from kcore
x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error
x86/mm/pti: Make local symbols static
x86/cpu/cyrix: Remove {get,set}Cx86_old macros used for Cyrix processors
x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors
x86/microcode: Announce reload operation's completion
x86/hyperv: Prevent potential NULL pointer dereference
x86/hpet: Prevent potential NULL pointer dereference
x86/lib: Fix indentation issue, remove extra tab
x86/boot: Restrict header scope to make Clang happy
x86/mm: Don't leak kernel addresses
x86/cpufeature: Fix various quality problems in the <asm/cpu_device_hd.h> header
Linus Torvalds [Sun, 24 Mar 2019 18:09:47 +0000 (11:09 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A set of small fixes plus the removal of stale board support code:
- Remove the board support code from the clpx711x clocksource driver.
This change had fallen through the cracks and I'm sending it now
rather than dealing with people who want to improve that stale code
for 3 month.
- Use the proper clocksource mask on RICSV
- Make local scope functions and variables static"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/clps711x: Remove board support
clocksource/drivers/riscv: Fix clocksource mask
clocksource/drivers/mips-gic-timer: Make gic_compare_irqaction static
clocksource/drivers/timer-ti-dm: Make omap_dm_timer_set_load_start() static
clocksource/drivers/tcb_clksrc: Make tc_clksrc_suspend/resume() static
clocksource/drivers/clps711x: Make clps711x_clksrc_init() static
time/jiffies: Make refined_jiffies static
Linus Torvalds [Sun, 24 Mar 2019 17:58:01 +0000 (10:58 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two small fixes:
- Cure a recently introduces error path hickup which tries to
unregister a not registered lockdep key in te workqueue code
- Prevent unaligned cmpxchg() crashes in the robust list handling
code by sanity checking the user space supplied futex pointer"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Ensure that futex address is aligned in handle_futex_death()
workqueue: Only unregister a registered lockdep key
Linus Torvalds [Sun, 24 Mar 2019 17:51:23 +0000 (10:51 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for the interrupt subsystem:
- Remove secondary GIC support on systems w/o device-tree support
- A set of small fixlets in various irqchip drivers
- static and fall-through annotations
- Kernel doc and typo fixes"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Mark expected switch case fall-through
genirq/devres: Remove excess parameter from kernel doc
irqchip/irq-mvebu-sei: Make mvebu_sei_ap806_caps static
irqchip/mbigen: Don't clear eventid when freeing an MSI
irqchip/stm32: Don't set rising configuration registers at init
irqchip/stm32: Don't clear rising/falling config registers at init
dt-bindings: irqchip: renesas-irqc: Document r8a774c0 support
irqchip/mmp: Make mmp_irq_domain_ops static
irqchip/brcmstb-l2: Make two init functions static
genirq: Fix typo in comment of IRQD_MOVE_PCNTXT
irqchip/gic-v3-its: Fix comparison logic in lpi_range_cmp
irqchip/gic: Drop support for secondary GIC in non-DT systems
irqchip/imx-irqsteer: Fix of_property_read_u32() error handling
Linus Torvalds [Sun, 24 Mar 2019 17:17:33 +0000 (10:17 -0700)]
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fixes from Thomas Gleixner:
"Two small fixes:
- Move the large objtool_file struct off the stack so objtool works
in setups with a tight stack limit.
- Make a few variables static in the watchdog core code"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
watchdog/core: Make variables static
objtool: Move objtool_file struct off the stack
Linus Torvalds [Sun, 24 Mar 2019 16:58:08 +0000 (09:58 -0700)]
Merge tag '5.1-rc1-cifs-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb3 fixes from Steve French:
- two fixes for stable for guest mount problems with smb3.1.1
- two fixes for crediting (SMB3 flow control) on resent requests
- a byte range lock leak fix
- two fixes for incorrect rc mappings
* tag '5.1-rc1-cifs-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number
SMB3: Fix SMB3.1.1 guest mounts to Samba
cifs: Fix slab-out-of-bounds when tracing SMB tcon
cifs: allow guest mounts to work for smb3.11
fix incorrect error code mapping for OBJECTID_NOT_FOUND
cifs: fix that return -EINVAL when do dedupe operation
CIFS: Fix an issue with re-sending rdata when transport returning -EAGAIN
CIFS: Fix an issue with re-sending wdata when transport returning -EAGAIN
Linus Torvalds [Sun, 24 Mar 2019 16:43:35 +0000 (09:43 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six fixes to four drivers and two core fixes.
One core fix simply corrects a missed destroy_rcu_head() but the other
is hopefully the end of an ongoing effort to make suspend/resume play
nicely with scsi quiesce"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ibmvscsi: Fix empty event pool access during host removal
scsi: ibmvscsi: Protect ibmvscsi_head from concurrent modificaiton
scsi: hisi_sas: Add softreset in hisi_sas_I_T_nexus_reset()
scsi: qla2xxx: Fix NULL pointer crash due to stale CPUID
scsi: qla2xxx: Fix FC-AL connection target discovery
scsi: core: Avoid that a kernel warning appears during system resume
scsi: core: Also call destroy_rcu_head() for passthrough requests
scsi: iscsi: flush running unbind operations when removing a session
Linus Torvalds [Sat, 23 Mar 2019 17:25:12 +0000 (10:25 -0700)]
Merge tag 'io_uring-20190323' of git://git.kernel.dk/linux-block
Pull io_uring fixes and improvements from Jens Axboe:
"The first five in this series are heavily inspired by the work Al did
on the aio side to fix the races there.
The last two re-introduce a feature that was in io_uring before it got
merged, but which I pulled since we didn't have a good way to have
BVEC iters that already have a stable reference. These aren't
necessarily related to block, it's just how io_uring pins fixed
buffers"
* tag 'io_uring-20190323' of git://git.kernel.dk/linux-block:
block: add BIO_NO_PAGE_REF flag
iov_iter: add ITER_BVEC_FLAG_NO_REF flag
io_uring: mark me as the maintainer
io_uring: retry bulk slab allocs as single allocs
io_uring: fix poll races
io_uring: fix fget/fput handling
io_uring: add prepped flag
io_uring: make io_read/write return an integer
io_uring: use regular request ref counts
Linus Torvalds [Sat, 23 Mar 2019 17:14:42 +0000 (10:14 -0700)]
Merge tag 'for-linus-20190323' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A set of fixes/changes that should go into this series. This contains:
- Kernel doc / comment updates (Bart, Shenghui)
- Un-export of core-only used function (Bart)
- Fix race on loop file access (Dongli)
- pf/pcd queue cleanup fixes (me)
- Use appropriate helper for RESTART bit set (Yufen)
- Use named identifier for classic poll (Yufen)"
* tag 'for-linus-20190323' of git://git.kernel.dk/linux-block:
sbitmap: trivial - update comment for sbitmap_deferred_clear_bit
blkcg: Fix kernel-doc warnings
blk-iolatency: #include "blk.h"
block: Unexport blk_mq_add_to_requeue_list()
block: add BLK_MQ_POLL_CLASSIC for hybrid poll and return EINVAL for unexpected value
blk-mq: remove unused 'nr_expired' from blk_mq_hw_ctx
loop: access lo_backing_file only when the loop device is Lo_bound
blk-mq: use blk_mq_sched_mark_restart_hctx to set RESTART
paride/pcd: cleanup queues when detection fails
paride/pf: cleanup queues when detection fails
Linus Torvalds [Sat, 23 Mar 2019 17:04:47 +0000 (10:04 -0700)]
Merge tag 'ceph-for-5.1-rc2' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A follow up for the new alloc_size logic and a blacklisting fix,
marked for stable"
* tag 'ceph-for-5.1-rc2' of git://github.com/ceph/ceph-client:
rbd: drop wait_for_latest_osdmap()
libceph: wait for latest osdmap in ceph_monc_blacklist_add()
rbd: set io_min, io_opt and discard_granularity to alloc_size
Darrick J. Wong [Sat, 23 Mar 2019 16:10:29 +0000 (12:10 -0400)]
ext4: prohibit fstrim in norecovery mode
The ext4 fstrim implementation uses the block bitmaps to find free space
that can be discarded. If we haven't replayed the journal, the bitmaps
will be stale and we absolutely *cannot* use stale metadata to zap the
underlying storage.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
zhangyi (F) [Sat, 23 Mar 2019 15:56:01 +0000 (11:56 -0400)]
ext4: cleanup bh release code in ext4_ind_remove_space()
Currently, we are releasing the indirect buffer where we are done with
it in ext4_ind_remove_space(), so we can see the brelse() and
BUFFER_TRACE() everywhere. It seems fragile and hard to read, and we
may probably forget to release the buffer some day. This patch cleans
up the code by putting of the code which releases the buffers to the
end of the function.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
zhangyi (F) [Sat, 23 Mar 2019 15:43:05 +0000 (11:43 -0400)]
ext4: brelse all indirect buffer in ext4_ind_remove_space()
All indirect buffers get by ext4_find_shared() should be released no
mater the branch should be freed or not. But now, we forget to release
the lower depth indirect buffers when removing space from the same
higher depth indirect block. It will lead to buffer leak and futher
more, it may lead to quota information corruption when using old quota,
consider the following case.
- Create and mount an empty ext4 filesystem without extent and quota
features,
- quotacheck and enable the user & group quota,
- Create some files and write some data to them, and then punch hole
to some files of them, it may trigger the buffer leak problem
mentioned above.
- Disable quota and run quotacheck again, it will create two new
aquota files and write the checked quota information to them, which
probably may reuse the freed indirect block(the buffer and page
cache was not freed) as data block.
- Enable quota again, it will invoke
vfs_load_quota_inode()->invalidate_bdev() to try to clean unused
buffers and pagecache. Unfortunately, because of the buffer of quota
data block is still referenced, quota code cannot read the up to date
quota info from the device and lead to quota information corruption.
This problem can be reproduced by xfstests generic/231 on ext3 file
system or ext4 file system without extent and quota features.
This patch fix this problem by releasing the missing indirect buffers,
in ext4_ind_remove_space().
Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@kernel.org
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
With -Wimplicit-fallthrough added to CFLAGS:
kernel/irq/manage.c: In function ‘irq_do_set_affinity’:
kernel/irq/manage.c:198:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
cpumask_copy(desc->irq_common_data.affinity, mask);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/irq/manage.c:199:2: note: here
case IRQ_SET_MASK_OK_NOCOPY:
^~~~
Kairui Song [Fri, 8 Mar 2019 03:05:08 +0000 (11:05 +0800)]
x86/gart: Exclude GART aperture from kcore
On machines where the GART aperture is mapped over physical RAM,
/proc/kcore contains the GART aperture range. Accessing the GART range via
/proc/kcore results in a kernel crash.
vmcore used to have the same issue, until it was fixed with commit 2a3e83c6f96c ("x86/gart: Exclude GART aperture from vmcore")', leveraging
existing hook infrastructure in vmcore to let /proc/vmcore return zeroes
when attempting to read the aperture region, and so it won't read from the
actual memory.
Apply the same workaround for kcore. First implement the same hook
infrastructure for kcore, then reuse the hook functions introduced in the
previous vmcore fix. Just with some minor adjustment, rename some functions
for more general usage, and simplify the hook infrastructure a bit as there
is no module usage yet.
Suggested-by: Baoquan He <bhe@redhat.com> Signed-off-by: Kairui Song <kasong@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jiri Bohac <jbohac@suse.cz> Acked-by: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Omar Sandoval <osandov@fb.com> Cc: Dave Young <dyoung@redhat.com> Link: https://lkml.kernel.org/r/20190308030508.13548-1-kasong@redhat.com
Steve French [Sat, 23 Mar 2019 03:31:17 +0000 (22:31 -0500)]
SMB3: Fix SMB3.1.1 guest mounts to Samba
Workaround problem with Samba responses to SMB3.1.1
null user (guest) mounts. The server doesn't set the
expected flag in the session setup response so we have
to do a similar check to what is done in smb3_validate_negotiate
where we also check if the user is a null user (but not sec=krb5
since username might not be passed in on mount for Kerberos case).
Note that the commit below tightened the conditions and forced signing
for the SMB2-TreeConnect commands as per MS-SMB2.
However, this should only apply to normal user sessions and not for
cases where there is no user (even if server forgets to set the flag
in the response) since we don't have anything useful to sign with.
This is especially important now that the more secure SMB3.1.1 protocol
is in the default dialect list.
An earlier patch ("cifs: allow guest mounts to work for smb3.11") fixed
the guest mounts to Windows.
Fixes: 6188f28bf608 ("Tree connect for SMB3.1.1 must be signed for non-encrypted shares") Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Paulo Alcantara <palcantara@suse.de> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
[ 779.045085] Memory state around the buggy address:
[ 779.045089] ffff88814f327800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 779.045093] ffff88814f327880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 779.045097] >ffff88814f327900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 779.045099] ^
[ 779.045103] ffff88814f327980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 779.045107] ffff88814f327a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 779.045109] ==================================================================
[ 779.045110] Disabling lock debugging due to kernel taint
Correctly assign tree name str for smb3_tcon event.
Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac> Signed-off-by: Steve French <stfrench@microsoft.com>
Ronnie Sahlberg [Thu, 21 Mar 2019 04:59:02 +0000 (14:59 +1000)]
cifs: allow guest mounts to work for smb3.11
Fix Guest/Anonymous sessions so that they work with SMB 3.11.
The commit noted below tightened the conditions and forced signing for
the SMB2-TreeConnect commands as per MS-SMB2.
However, this should only apply to normal user sessions and not for
Guest/Anonumous sessions.
Fixes: 6188f28bf608 ("Tree connect for SMB3.1.1 must be signed for non-encrypted shares") Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Steve French [Sun, 17 Mar 2019 20:58:38 +0000 (15:58 -0500)]
fix incorrect error code mapping for OBJECTID_NOT_FOUND
It was mapped to EIO which can be confusing when user space
queries for an object GUID for an object for which the server
file system doesn't support (or hasn't saved one).
As Amir Goldstein suggested this is similar to ENOATTR
(equivalently ENODATA in Linux errno definitions) so
changing NT STATUS code mapping for OBJECTID_NOT_FOUND
to ENODATA.
Signed-off-by: Steve French <stfrench@microsoft.com> CC: Amir Goldstein <amir73il@gmail.com>
Xiaoli Feng [Sat, 16 Mar 2019 04:11:54 +0000 (12:11 +0800)]
cifs: fix that return -EINVAL when do dedupe operation
dedupe_file_range operations is combiled into remap_file_range.
But it's always skipped for dedupe operations in function
cifs_remap_file_range.
Example to test:
Before this patch:
# dd if=/dev/zero of=cifs/file bs=1M count=1
# xfs_io -c "dedupe cifs/file 4k 64k 4k" cifs/file
XFS_IOC_FILE_EXTENT_SAME: Invalid argument
After this patch:
# dd if=/dev/zero of=cifs/file bs=1M count=1
# xfs_io -c "dedupe cifs/file 4k 64k 4k" cifs/file
XFS_IOC_FILE_EXTENT_SAME: Operation not supported
Influence for xfstests:
generic/091
generic/112
generic/127
generic/263
These tests report this error "do_copy_range:: Invalid
argument" instead of "FIDEDUPERANGE: Invalid argument".
Because there are still two bugs cause these test failed.
https://bugzilla.kernel.org/show_bug.cgi?id=202935
https://bugzilla.kernel.org/show_bug.cgi?id=202785
Signed-off-by: Xiaoli Feng <fengxiaoli0714@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Long Li [Fri, 15 Mar 2019 07:55:00 +0000 (07:55 +0000)]
CIFS: Fix an issue with re-sending rdata when transport returning -EAGAIN
When sending a rdata, transport may return -EAGAIN. In this case
we should re-obtain credits because the session may have been
reconnected.
Change in v2: adjust_credits before re-sending
Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Long Li [Fri, 15 Mar 2019 07:54:59 +0000 (07:54 +0000)]
CIFS: Fix an issue with re-sending wdata when transport returning -EAGAIN
When sending a wdata, transport may return -EAGAIN. In this case
we should re-obtain credits because the session may have been
reconnected.
Change in v2: adjust_credits before re-sending
Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
YueHaibing [Fri, 22 Mar 2019 14:39:40 +0000 (22:39 +0800)]
clocksource/drivers/tcb_clksrc: Make tc_clksrc_suspend/resume() static
Fix sparse warnings:
drivers/clocksource/tcb_clksrc.c:74:6: warning:
symbol 'tc_clksrc_suspend' was not declared. Should it be static?
drivers/clocksource/tcb_clksrc.c:89:6: warning:
symbol 'tc_clksrc_resume' was not declared. Should it be static?
Thomas Gleixner [Fri, 22 Mar 2019 21:51:21 +0000 (22:51 +0100)]
Merge tag 'perf-core-for-mingo-5.1-20190321' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo:
BPF:
Song Liu:
- Add support for annotating BPF programs, using the PERF_RECORD_BPF_EVENT
and PERF_RECORD_KSYMBOL recently added to the kernel and plugging
binutils's libopcodes disassembly of BPF programs with the existing
annotation interfaces in 'perf annotate', 'perf report' and 'perf top'
various output formats (--stdio, --stdio2, --tui).
perf list:
Andi Kleen:
- Filter metrics when using substring search.
perf record:
Andi Kleen:
- Allow to limit number of reported perf.data files
- Clarify help for --switch-output.
perf report:
Andi Kleen
- Indicate JITed code better.
- Show all sort keys in help output.
perf script:
Andi Kleen:
- Support relative time.
perf stat:
Andi Kleen:
- Improve scaling.
General:
Changbin Du:
- Fix some mostly error path memory and reference count leaks found
using gcc's ASan and UBSan.
Vendor events:
Mamatha Inamdar:
- Remove P8 HW events which are not supported.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Fri, 22 Mar 2019 21:50:41 +0000 (22:50 +0100)]
Merge tag 'perf-core-for-mingo-5.1-20190311' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo:
kernel:
Stephane Eranian :
- Restore mmap record type correctly when handling PERF_RECORD_MMAP2
events, as the same template is used for all the threads interested
in mmap events, some may want just PERF_RECORD_MMAP, while some
may want the extra info in MMAP2 records.
perf probe:
Adrian Hunter:
- Fix getting the kernel map, because since changes related to x86 PTI
entry trampolines handling, there are more than one kernel map.
perf script:
Andi Kleen:
- Support insn output for normal samples, i.e.:
perf script -F ip,sym,insn --xed
Will fetch the sample IP from the thread address space and feed it
to Intel's XED disassembler, producing lines such as:
- Make the --cpu filter apply to PERF_RECORD_COMM/FORK/... events, in
addition to PERF_RECORD_SAMPLE.
perf report:
- Add a new --samples option to save a small random number of samples
per hist entry, using a reservoir technique to select a representative
number of samples.
Then allow browsing the samples using 'perf script' as part of the hist
entry context menu. This automatically adds the right filters, so only
the thread or CPU of the sample is displayed. Then we use less' search
functionality to directly jump to the time stamp of the selected sample.
It uses different menus for assembler and source display. Assembler
needs xed installed and source needs debuginfo.
- Fix the UI browser scripts pop up menu when there are many scripts
available.
- Update x86's syscall_64.tbl, no change in tools/perf behaviour.
- Sync copies asm-generic/unistd.h and linux/in with the kernel sources.
perf data:
Jiri Olsa:
- Prep work to support having perf.data stored as a directory, with one
file per CPU, that ultimately will allow having one ring buffer reading
thread per CPU.
Vendor events:
Martin Liška:
- perf PMU events for AMD Family 17h.
perf script python:
Tony Jones:
- Add python3 support for the remaining Intel PT related scripts, with
these we should have a clean build of perf with python3 while still
supporting the build with python2.
libbpf:
Arnaldo Carvalho de Melo:
- Fix the build on uCLibc, adding the missing stdarg.h since we use
va_list in one typedef.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Fri, 22 Mar 2019 21:15:11 +0000 (14:15 -0700)]
Merge tag 'powerpc-5.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One fix for a boot failure on 32-bit, introduced during the merge
window.
A fix for our handling of CLOCK_MONOTONIC in the 64-bit VDSO. Changing
the wall clock across the Y2038 boundary could cause CLOCK_MONOTONIC
to jump forward and backward.
Our spectre_v2 reporting was a bit confusing due to a bug I
introduced. On some systems it was reporting that the count cache was
disabled and also that we were flushing the count cache on context
switch. Only the former is true, and given that the count cache is
disabled it doesn't make any sense to flush it. No one reported it, so
presumably the presence of any mitigation is all people check for.
Finally a small build fix for zsmalloc on 32-bit.
Thanks to: Ben Hutchings, Christophe Leroy, Diana Craciun, Guenter
Roeck, Michael Neuling"
* tag 'powerpc-5.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/security: Fix spectre_v2 reporting
powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurations
powerpc/6xx: fix setup and use of SPRN_SPRG_PGDIR for hash32
powerpc/vdso64: Fix CLOCK_MONOTONIC inconsistencies across Y2038
Linus Torvalds [Fri, 22 Mar 2019 21:10:27 +0000 (14:10 -0700)]
Merge tag 'iommu-fixes-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- AMD IOMMU fix for sg-mapping with sg->offset > PAGE_SIZE
- Fix for IOVA code to trigger the slow-path less often
- Two fixes for Intel VT-d to avoid writing to read-only registers and
to flush the right domain id for the default domains in scalable mode
* tag 'iommu-fixes-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Save the right domain ID used by hardware
iommu/vt-d: Check capability before disabling protected memory
iommu/iova: Fix tracking of recently failed iova address
iommu/amd: fix sg->dma_address for sg->offset bigger than PAGE_SIZE
Linus Torvalds [Fri, 22 Mar 2019 21:04:38 +0000 (14:04 -0700)]
Merge tag 'sound-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only significant change is the regression fixes for the jack
detection at resume on HD-audio, while others are all small or trivial
fixes like the coverage of missing error code or usual HD-audio quirk"
* tag 'sound-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Enable headset MIC of Acer AIO with ALC286
ALSA: hda - Enforces runtime_resume after S3 and S4 for each codec
ALSA: hda - Don't trigger jackpoll_work in azx_resume
ALSA: opl3: fix mismatch between snd_opl3_drum_switch definition and declaration
ALSA: hda - add Lenovo IdeaCentre B550 to the power_save_blacklist
ALSA: firewire-motu: use 'version' field of unit directory to identify model
ALSA: sb8: add a check for request_region
ALSA: echoaudio: add a check for ioremap_nocache
Linus Torvalds [Fri, 22 Mar 2019 19:03:19 +0000 (12:03 -0700)]
Merge tag 'pm-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These rearrange some code in the generic power domains (genpd)
framework to avoid a potential deadlock and make the turbostat utility
behave more as expected.
Specifics:
- Rearrange the generic power domains (genpd) code to avoid a
potential deadlock possible due to its interactions with the clock
framework (Jiada Wang)
- Make turbostat return the exit status of the command run under it
if that command fails (David Arcari)"
* tag 'pm-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / Domains: Avoid a potential deadlock
tools/power turbostat: return the exit status of a command
x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error
When building with -Wsometimes-uninitialized, Clang warns:
arch/x86/kernel/hw_breakpoint.c:355:2: warning: variable 'align' is used
uninitialized whenever switch default is taken
[-Wsometimes-uninitialized]
The default cannot be reached because arch_build_bp_info() initializes
hw->len to one of the specified cases. Nevertheless the warning is valid
and returning -EINVAL makes sure that this cannot be broken by future
modifications.
Valdis Kletnieks [Tue, 12 Mar 2019 09:33:48 +0000 (05:33 -0400)]
watchdog/core: Make variables static
sparse complains:
CHECK kernel/watchdog.c
kernel/watchdog.c:45:19: warning: symbol 'nmi_watchdog_available'
was not declared. Should it be static?
kernel/watchdog.c:47:16: warning: symbol 'watchdog_allowed_mask'
was not declared. Should it be static?
They're not referenced by name from anyplace else, make them static.
Valdis Kletnieks [Tue, 12 Mar 2019 07:47:53 +0000 (03:47 -0400)]
x86/mm/pti: Make local symbols static
With 'make C=2 W=1', sparse and gcc both complain:
CHECK arch/x86/mm/pti.c
arch/x86/mm/pti.c:84:3: warning: symbol 'pti_mode' was not declared. Should it be static?
arch/x86/mm/pti.c:605:6: warning: symbol 'pti_set_kernel_image_nonglobal' was not declared. Should it be static?
CC arch/x86/mm/pti.o
arch/x86/mm/pti.c:605:6: warning: no previous prototype for 'pti_set_kernel_image_nonglobal' [-Wmissing-prototypes]
605 | void pti_set_kernel_image_nonglobal(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
pti_set_kernel_image_nonglobal() is only used locally. 'pti_mode' exists in
drivers/hwtracing/intel_th/pti.c as well, but it's a completely unrelated
local (static) symbol.
Make both static.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/27680.1552376873@turing-police
Chen Jie [Fri, 15 Mar 2019 03:44:38 +0000 (03:44 +0000)]
futex: Ensure that futex address is aligned in handle_futex_death()
The futex code requires that the user space addresses of futexes are 32bit
aligned. sys_futex() checks this in futex_get_keys() but the robust list
code has no alignment check in place.
As a consequence the kernel crashes on architectures with strict alignment
requirements in handle_futex_death() when trying to cmpxchg() on an
unaligned futex address which was retrieved from the robust list.
[ tglx: Rewrote changelog, proper sizeof() based alignement check and add
comment ]
Lu Baolu [Wed, 20 Mar 2019 01:58:34 +0000 (09:58 +0800)]
iommu/vt-d: Save the right domain ID used by hardware
The driver sets a default domain id (FLPT_DEFAULT_DID) in the
first level only pasid entry, but saves a different domain id
in @sdev->did. The value saved in @sdev->did will be used to
invalidate the translation caches. Hence, the driver might
result in invalidating the caches with a wrong domain id.
Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Fixes: 1c4f88b7f1f92 ("iommu/vt-d: Shared virtual address in scalable mode") Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
Lu Baolu [Wed, 20 Mar 2019 01:58:33 +0000 (09:58 +0800)]
iommu/vt-d: Check capability before disabling protected memory
The spec states in 10.4.16 that the Protected Memory Enable
Register should be treated as read-only for implementations
not supporting protected memory regions (PLMR and PHMR fields
reported as Clear in the Capability register).
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: mark gross <mgross@intel.com> Suggested-by: Ashok Raj <ashok.raj@intel.com> Fixes: f8bab73515ca5 ("intel-iommu: PMEN support") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
Robert Richter [Wed, 20 Mar 2019 18:57:23 +0000 (18:57 +0000)]
iommu/iova: Fix tracking of recently failed iova address
If a 32 bit allocation request is too big to possibly succeed, it
early exits with a failure and then should never update max32_alloc_
size. This patch fixes current code, now the size is only updated if
the slow path failed while walking the tree. Without the fix the
allocation may enter the slow path again even if there was a failure
before of a request with the same or a smaller size.
Cc: <stable@vger.kernel.org> # 4.20+ Fixes: bee60e94a1e2 ("iommu/iova: Optimise attempts to allocate iova from 32bit address range") Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
Linus Torvalds [Fri, 22 Mar 2019 03:40:05 +0000 (20:40 -0700)]
Merge tag 'drm-fixes-2019-03-22' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"i915, amdgpu, vmwgfx, exynos, nouveau and udl fixes.
Seems to be lots of little minor ones for regressions in rc1, and some
cleanups. The exynos one is the largest one, and is for a hw
difference between exynos versions"
* tag 'drm-fixes-2019-03-22' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/dmem: empty chunk do not have a buffer object associated with them.
drm/nouveau/debugfs: Fix check of pm_runtime_get_sync failure
drm/nouveau/dmem: Fix a NULL vs IS_ERR() check
drm/nouveau/dmem: remove set but not used variable 'drm'
drm/exynos/mixer: fix MIXER shadow registry synchronisation code
drm/vmwgfx: Don't double-free the mode stored in par->set_mode
drm/vmwgfx: Return 0 when gmrid::get_node runs out of ID's
drm/amdgpu: fix invalid use of change_bit
drm/amdgpu: revert "cleanup setting bulk_movable"
drm/i915: Sanity check mmap length against object size
drm/i915: Fix off-by-one in reporting hanging process
drm/i915/bios: assume eDP is present on port A when there is no VBT
drm/udl: use drm_gem_object_put_unlocked.
Dave Airlie [Fri, 22 Mar 2019 01:52:40 +0000 (11:52 +1000)]
Merge tag 'exynos-drm-fixes-for-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
- Fix page fault issue at Mixer device
. This patch fixes the page fault issue by correcting sychronization
method for updating shadow registers for Mixer device.
Dave Airlie [Fri, 22 Mar 2019 00:41:51 +0000 (10:41 +1000)]
Merge tag 'drm-intel-fixes-2019-03-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
A protection on our mmap against attempts to map past the end of the object;
plus a fix off-by-one in our hang report and a protection;
and a fix for eDP panels on Gen9 platforms on VBT absence.
YueHaibing [Thu, 28 Feb 2019 12:24:59 +0000 (20:24 +0800)]
drm/nouveau/debugfs: Fix check of pm_runtime_get_sync failure
pm_runtime_get_sync returns negative on failure.
Fixes: eaeb9010bb4b ("drm/nouveau/debugfs: Wake up GPU before doing any reclocking") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
YueHaibing [Thu, 21 Feb 2019 03:38:51 +0000 (03:38 +0000)]
drm/nouveau/dmem: remove set but not used variable 'drm'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/nouveau/nouveau_dmem.c: In function 'nouveau_dmem_free':
drivers/gpu/drm/nouveau/nouveau_dmem.c:103:22: warning:
variable 'drm' set but not used [-Wunused-but-set-variable]
struct nouveau_drm *drm;
^
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Linus Torvalds [Thu, 21 Mar 2019 18:48:06 +0000 (11:48 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Mostly fixes apart from the kprobe blacklist checking which was
deferred because of conflicting with a fix merged after I pinned the
arm64 for-next/core branch (f2b3d8566d81 "arm64: kprobe: Always
blacklist the KVM world-switch code").
Summary:
- Update the kprobe blacklist checking for arm64. This was supposed
to be queued during the merging window but, due to conflicts, it
was deferred post -rc1
- Extend the Fujitsu erratum 010001 workaround to A64FX v1r0
- Whitelist HiSilicon Taishan v110 CPUs as not susceptible to
Meltdown
- Export save_stack_trace_regs()
- Remove obsolete selection of MULTI_IRQ_HANDLER"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: remove obsolete selection of MULTI_IRQ_HANDLER
arm64: kpti: Whitelist HiSilicon Taishan v110 CPUs
arm64: Add MIDR encoding for HiSilicon Taishan CPUs
arm64/stacktrace: Export save_stack_trace_regs()
arm64: apply workaround on A64FX v1r0
arm64: kprobes: Use arch_populate_kprobe_blacklist()
arm64: kprobes: Move exception_text check in blacklist
arm64: kprobes: Remove unneeded RODATA check
arm64: kprobes: Move extable address check into arch_prepare_kprobe()
Linus Torvalds [Thu, 21 Mar 2019 17:31:55 +0000 (10:31 -0700)]
Merge tag 'fixes_for_v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull udf fixes from Jan Kara:
"Two udf error handling fixes"
* tag 'fixes_for_v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Propagate errors from udf_truncate_extents()
udf: Fix crash on IO error during truncate
Linus Torvalds [Thu, 21 Mar 2019 17:24:00 +0000 (10:24 -0700)]
Merge tag 'fsnotify_for_v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify fixes from Jan Kara:
"One inotify and one fanotify fix"
* tag 'fsnotify_for_v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: Allow copying of file handle to userspace
inotify: Fix fsnotify_mark refcount leak in inotify_update_existing_watch()
projects / thirdparty / kernel / stable.git / log
