When fixing the race conditions between the coredump and the mmap_sem
holders outside the context of the process, we focused on
mmget_not_zero()/get_task_mm() callers in 04f5866e41fb70 ("coredump: fix
race condition between mmget_not_zero()/get_task_mm() and core
dumping"), but those aren't the only cases where the mmap_sem can be
taken outside of the context of the process as Michal Hocko noticed
while backporting that commit to older -stable kernels.
If mmgrab() is called in the context of the process, but then the
mm_count reference is transferred outside the context of the process,
that can also be a problem if the mmap_sem has to be taken for writing
through that mm_count reference.
khugepaged registration calls mmgrab() in the context of the process,
but the mmap_sem for writing is taken later in the context of the
khugepaged kernel thread.
collapse_huge_page() after taking the mmap_sem for writing doesn't
modify any vma, so it's not obvious that it could cause a problem to the
coredump, but it happens to modify the pmd in a way that breaks an
invariant that pmd_trans_huge_lock() relies upon. collapse_huge_page()
needs the mmap_sem for writing just to block concurrent page faults that
call pmd_trans_huge_lock().
Specifically the invariant that "!pmd_trans_huge()" cannot become a
"pmd_trans_huge()" doesn't hold while collapse_huge_page() runs.
The coredump will call __get_user_pages() without mmap_sem for reading,
which eventually can invoke a lockless page fault which will need a
functional pmd_trans_huge_lock().
So collapse_huge_page() needs to use mmget_still_valid() to check it's
not running concurrently with the coredump... as long as the coredump
can invoke page faults without holding the mmap_sem for reading.
This has "Fixes: khugepaged" to facilitate backporting, but in my view
it's more a bug in the coredump code that will eventually have to be
rewritten to stop invoking page faults without the mmap_sem for reading.
So the long term plan is still to drop all mmget_still_valid().
Link: http://lkml.kernel.org/r/20190607161558.32104-1-aarcange@redhat.com Fixes: ba76149f47d8 ("thp: khugepaged") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Michal Hocko <mhocko@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the controller supports less queues than requested, we
should make sure that queue mapping does the right thing and
not assume that all queues are available. This fixes a crash
when the controller supports less queues than requested.
The rules are:
1. if no write queues are requested, we assign the available queues
to the default queue map. The default and read queue maps share the
existing queues.
2. if write queues are requested:
- first make sure that read queue map gets the requested
nr_io_queues count
- then grant the default queue map the minimum between the requested
nr_write_queues and the remaining queues. If there are no available
queues to dedicate to the default queue map, fallback to (1) and
share all the queues in the existing queue map.
Also, provide a log indication on how we constructed the different
queue maps.
Reported-by: Harris, James R <james.r.harris@intel.com> Tested-by: Jim Harris <james.r.harris@intel.com> Cc: <stable@vger.kernel.org> # v5.0+ Suggested-by: Roy Shterman <roys@lightbitslabs.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A few new fields were added to mmu_gather to make TLB flush smarter for
huge page by telling what level of page table is changed.
__tlb_reset_range() is used to reset all these page table state to
unchanged, which is called by TLB flush for parallel mapping changes for
the same range under non-exclusive lock (i.e. read mmap_sem).
Before commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in
munmap"), the syscalls (e.g. MADV_DONTNEED, MADV_FREE) which may update
PTEs in parallel don't remove page tables. But, the forementioned
commit may do munmap() under read mmap_sem and free page tables. This
may result in program hang on aarch64 reported by Jan Stancek. The
problem could be reproduced by his test program with slightly modified
below.
---8<---
static int map_size = 4096;
static int num_iter = 500;
static long threads_total;
static void *distant_area;
void *map_write_unmap(void *ptr)
{
int *fd = ptr;
unsigned char *map_address;
int i, j = 0;
for (i = 0; i < num_iter; i++) {
map_address = mmap(distant_area, (size_t) map_size, PROT_WRITE | PROT_READ,
MAP_SHARED | MAP_ANONYMOUS, -1, 0);
if (map_address == MAP_FAILED) {
perror("mmap");
exit(1);
}
tlb_finish_mmu()
if (mm_tlb_flush_nested(tlb->mm))
__tlb_reset_range()
__tlb_reset_range() would reset freed_tables and cleared_* bits, but this
may cause inconsistency for munmap() which do free page tables. Then it
may result in some architectures, e.g. aarch64, may not flush TLB
completely as expected to have stale TLB entries remained.
Use fullmm flush since it yields much better performance on aarch64 and
non-fullmm doesn't yields significant difference on x86.
The original proposed fix came from Jan Stancek who mainly debugged this
issue, I just wrapped up everything together.
Jan's testing results:
v5.2-rc2-24-gbec7550cca10
--------------------------
mean stddev
real 37.382 2.780
user 1.420 0.078
sys 54.658 1.855
v5.2-rc2-24-gbec7550cca10 + "mm: mmu_gather: remove __tlb_reset_range() for force flush"
---------------------------------------------------------------------------------------_
mean stddev
real 37.119 2.105
user 1.548 0.087
sys 55.698 1.357
[akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1558322252-113575-1-git-send-email-yang.shi@linux.alibaba.com Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Jan Stancek <jstancek@redhat.com> Reported-by: Jan Stancek <jstancek@redhat.com> Tested-by: Jan Stancek <jstancek@redhat.com> Suggested-by: Will Deacon <will.deacon@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Nick Piggin <npiggin@gmail.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: <stable@vger.kernel.org> [4.20+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a call to kobject_init_and_add() fails we should call kobject_put()
otherwise we leak memory.
Add call to kobject_put() in the error path of call to
kobject_init_and_add(). Please note, this has the side effect that the
release method is called if kobject_init_and_add() fails.
Link: http://lkml.kernel.org/r/20190513033458.2824-1-tobin@kernel.org Signed-off-by: Tobin C. Harding <tobin@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The sas_port(phy->port) allocated in sas_ex_discover_expander() will not be
deleted when the expander failed to discover. This will cause resource leak
and a further issue of kernel BUG like below:
Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Reported-by: Jian Luo <luojian5@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If alloc_workqueue fails in alua_init, it should return -ENOMEM, otherwise
it will trigger null-ptr-deref while unloading module which calls
destroy_workqueue dereference
wq->lock like this:
BUG: KASAN: null-ptr-deref in __lock_acquire+0x6b4/0x1ee0
Read of size 8 at addr 0000000000000080 by task syz-executor.0/7045
CPU: 0 PID: 7045 Comm: syz-executor.0 Tainted: G C 5.1.0+ #28
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1
Call Trace:
dump_stack+0xa9/0x10e
__kasan_report+0x171/0x18d
? __lock_acquire+0x6b4/0x1ee0
kasan_report+0xe/0x20
__lock_acquire+0x6b4/0x1ee0
lock_acquire+0xb4/0x1b0
__mutex_lock+0xd8/0xb90
drain_workqueue+0x25/0x290
destroy_workqueue+0x1f/0x3f0
__x64_sys_delete_module+0x244/0x330
do_syscall_64+0x72/0x2a0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 03197b61c5ec ("scsi_dh_alua: Use workqueue for RTPG") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When SME is enabled, the smartpqi driver won't work on the HP DL385 G10
machine, which causes the failure of kernel boot because it fails to
allocate pqi error buffer. Please refer to the kernel log:
....
[ 9.431749] usbcore: registered new interface driver uas
[ 9.441524] Microsemi PQI Driver (v1.1.4-130)
[ 9.442956] i40e 0000:04:00.0: fw 6.70.48768 api 1.7 nvm 10.2.5
[ 9.447237] smartpqi 0000:23:00.0: Microsemi Smart Family Controller found
Starting dracut initqueue hook...
[ OK ] Started Show Plymouth Boot Scre[ 9.471654] Broadcom NetXtreme-C/E driver bnxt_en v1.9.1
en.
[ OK ] Started Forward Password Requests to Plymouth Directory Watch.
[[0;[ 9.487108] smartpqi 0000:23:00.0: failed to allocate PQI error buffer
....
[ 139.050544] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 139.589779] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts
Basically, the fact that the coherent DMA mask value wasn't set caused the
driver to fall back to SWIOTLB when SME is active.
For correct operation, lets call the dma_set_mask_and_coherent() to
properly set the mask for both streaming and coherent, in order to inform
the kernel about the devices DMA addressing capabilities.
Signed-off-by: Lianbo Jiang <lijiang@redhat.com> Acked-by: Don Brace <don.brace@microsemi.com> Tested-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
After reset SGMII Autoneg timer is set to 2us (bits 6 and 5 are 01).
That is not enough to finalize autonegatiation on some devices.
Increase this timer duration to maximum supported 16ms.
Signed-off-by: Max Uvarov <muvarov@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
For supporting 10Mps speed in SGMII mode DP83867_10M_SGMII_RATE_ADAPT bit
of DP83867_10M_SGMII_CFG register has to be cleared by software.
That does not affect speeds 100 and 1000 so can be done on init.
Signed-off-by: Max Uvarov <muvarov@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Ensure that we supply the same phy interface mode to mac_link_down() as
we did for the corresponding mac_link_up() call. This ensures that MAC
drivers that use the phy interface mode in these methods can depend on
mac_link_down() always corresponding to a mac_link_up() call for the
same interface mode.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The sh_eth_close() resets the MAC and then calls phy_stop()
so that mdio read access result is incorrect without any error
according to kernel trace like below:
According to the hardware manual, the RMII mode should be set to 1
before operation the Ethernet MAC. However, the previous code was not
set to 1 after the driver issued the soft_reset in sh_eth_dev_exit()
so that the mdio read access result seemed incorrect. To fix the issue,
this patch adds a condition and set the RMII mode register in
sh_eth_dev_exit() for R-Car Gen2 and RZ/A1 SoCs.
Note that when I have tried to move the sh_eth_dev_exit() calling
after phy_stop() on sh_eth_close(), but it gets worse (kernel panic
happened and it seems that a register is accessed while the clock is
off).
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Calling sys_ni_syscall through a syscall_fn_t pointer trips indirect
call Control-Flow Integrity checking due to a function type
mismatch. Use SYSCALL_DEFINE0 for __arm64_sys_ni_syscall instead and
remove the now unnecessary casts.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Although a syscall defined using SYSCALL_DEFINE0 doesn't accept
parameters, use the correct function type to avoid indirect call
type mismatches with Control-Flow Integrity checking.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Syscall wrappers in <asm/syscall_wrapper.h> use const struct pt_regs *
as the argument type. Use const in syscall_fn_t as well to fix indirect
call type mismatches with Control-Flow Integrity checking.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
sound/firewire/fireface/ff-protocol-latter.c: In function ‘latter_switch_fetching_mode’:
sound/firewire/fireface/ff-protocol-latter.c:97: warning: integer constant is too large for ‘long’ type
sound/firewire/fireface/ff-protocol-latter.c: In function ‘latter_begin_session’:
sound/firewire/fireface/ff-protocol-latter.c:170: warning: integer constant is too large for ‘long’ type
sound/firewire/fireface/ff-protocol-latter.c:197: warning: integer constant is too large for ‘long’ type
sound/firewire/fireface/ff-protocol-latter.c:205: warning: integer constant is too large for ‘long’ type
sound/firewire/fireface/ff-protocol-latter.c: In function ‘latter_finish_session’:
sound/firewire/fireface/ff-protocol-latter.c:214: warning: integer constant is too large for ‘long’ type
Fix this by adding the missing "ULL" suffixes.
Add the same suffix to the last constant, to maintain consistency.
Currently the HV KVM code takes the kvm->lock around calls to
kvm_for_each_vcpu() and kvm_get_vcpu_by_id() (which can call
kvm_for_each_vcpu() internally). However, that leads to a lock
order inversion problem, because these are called in contexts where
the vcpu mutex is held, but the vcpu mutexes nest within kvm->lock
according to Documentation/virtual/kvm/locking.txt. Hence there
is a possibility of deadlock.
To fix this, we simply don't take the kvm->lock mutex around these
calls. This is safe because the implementations of kvm_for_each_vcpu()
and kvm_get_vcpu_by_id() have been designed to be able to be called
locklessly.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently the Book 3S KVM code uses kvm->lock to synchronize access
to the kvm->arch.rtas_tokens list. Because this list is scanned
inside kvmppc_rtas_hcall(), which is called with the vcpu mutex held,
taking kvm->lock cause a lock inversion problem, which could lead to
a deadlock.
To fix this, we add a new mutex, kvm->arch.rtas_token_lock, which nests
inside the vcpu mutexes, and use that instead of kvm->lock when
accessing the rtas token list.
This removes the lockdep_assert_held() in kvmppc_rtas_tokens_free().
At this point we don't hold the new mutex, but that is OK because
kvmppc_rtas_tokens_free() is only called when the whole VM is being
destroyed, and at that point nothing can be looking up a token in
the list.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently the HV KVM code uses kvm->lock in conjunction with a flag,
kvm->arch.mmu_ready, to synchronize MMU setup and hold off vcpu
execution until the MMU-related data structures are ready. However,
this means that kvm->lock is being taken inside vcpu->mutex, which
is contrary to Documentation/virtual/kvm/locking.txt and results in
lockdep warnings.
To fix this, we add a new mutex, kvm->arch.mmu_setup_lock, which nests
inside the vcpu mutexes, and is taken in the places where kvm->lock
was taken that are related to MMU setup.
Additionally we take the new mutex in the vcpu creation code at the
point where we are creating a new vcore, in order to provide mutual
exclusion with kvmppc_update_lpcr() and ensure that an update to
kvm->arch.lpcr doesn't get missed, which could otherwise lead to a
stale vcore->lpcr value.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In flush_cache_ent(), 'ce->ce_path' is allocated by kstrdup_const().
It should be freed by kfree_const(), rather than kfree().
Signed-off-by: Gen Zhang <blackgod016574@gmail.com> Reviewed-by: Paulo Alcantara <palcantara@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
During a suspend/resume, the xenwatch thread waits for all outstanding
xenstore requests and transactions to complete. This does not work
correctly for transactions started by userspace because it waits for
them to complete after freezing userspace threads which means the
transactions have no way of completing, resulting in a deadlock. This is
trivial to reproduce by running this script and then suspending the VM:
import pyxs, time
c = pyxs.client.Client(xen_bus_path="/dev/xen/xenbus")
c.connect()
c.transaction()
time.sleep(3600)
Even if this deadlock were resolved, misbehaving userspace should not
prevent a VM from being migrated. So, instead of waiting for these
transactions to complete before suspending, store the current generation
id for each transaction when it is started. The global generation id is
incremented during resume. If the caller commits the transaction and the
generation id does not match the current generation id, return EAGAIN so
that they try again. If the transaction was instead discarded, return OK
since no changes were made anyway.
This only affects users of the xenbus file interface. In-kernel users of
xenbus are assumed to be well-behaved and complete all transactions
before freezing.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/xen/pvcalls-front.c: In function pvcalls_front_sendmsg:
drivers/xen/pvcalls-front.c:543:25: warning: variable bedata set but not used [-Wunused-but-set-variable]
drivers/xen/pvcalls-front.c: In function pvcalls_front_recvmsg:
drivers/xen/pvcalls-front.c:638:25: warning: variable bedata set but not used [-Wunused-but-set-variable]
Make sure only the portals for the online CPUs are used.
Without this change, there are issues when someone boots with
maxcpus=n, with n < actual number of cores available as frames
either received or corresponding to the transmit confirmation
path would be offered for dequeue to the offline CPU portals,
getting lost.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Command 'perf record' and 'perf report' on a system without kernel
debuginfo packages uses /proc/kallsyms and /proc/modules to find
addresses for kernel and module symbols. On x86 this works for root and
non-root users.
On s390, when invoked as non-root user, many of the following warnings
are shown and module symbols are missing:
proc/{kallsyms,modules} inconsistency while looking for
"[sha1_s390]" module!
Command 'perf record' creates a list of module start addresses by
parsing the output of /proc/modules and creates a PERF_RECORD_MMAP
record for the kernel and each module. The following function call
sequence is executed:
machine__create_kernel_maps
machine__create_module
modules__parse
machine__create_module --> for each line in /proc/modules
arch__fix_module_text_start
Function arch__fix_module_text_start() is s390 specific. It opens
file /sys/module/<name>/sections/.text to extract the module's .text
section start address. On s390 the module loader prepends a header
before the first section, whereas on x86 the module's text section
address is identical the the module's load address.
However module section files are root readable only. For non-root the
read operation fails and machine__create_module() returns an error.
Command perf record does not generate any PERF_RECORD_MMAP record
for loaded modules. Later command perf report complains about missing
module maps.
To fix this function arch__fix_module_text_start() always returns
success. For root users there is no change, for non-root users
the module's load address is used as module's text start address
(the prepended header then counts as part of the text section).
This enable non-root users to use module symbols and avoid the
warning when perf report is executed.
The zcrypt device driver does not handle CPRBs which address
a control domain correctly. This fix introduces a workaround:
The domain field of the request CPRB is checked if there is
a valid domain value in there. If this is true and the value
is a control only domain (a domain which is enabled in the
crypto config ADM mask but disabled in the AQM mask) the
CPRB is forwarded to the default usage domain. If there is
no default domain, the request is rejected with an ENODEV.
This fix is important for maintaining crypto adapters. For
example one LPAR can use a crypto adapter domain ('Control
and Usage') but another LPAR needs to be able to maintain
this adapter domain ('Control'). Scenarios like this did
not work properly and the patch enables this.
This strncat() is safe because the buffer was allocated with zalloc(),
however gcc doesn't know that. Since the string always has 4 non-null
bytes, just use memcpy() here.
CC /home/shawn/linux/tools/perf/util/data-convert-bt.o
In file included from /usr/include/string.h:494,
from /home/shawn/linux/tools/lib/traceevent/event-parse.h:27,
from util/data-convert-bt.c:22:
In function ‘strncat’,
inlined from ‘string_set_value’ at util/data-convert-bt.c:274:4:
/usr/include/powerpc64le-linux-gnu/bits/string_fortified.h:136:10: error: ‘__builtin_strncat’ output may be truncated copying 4 bytes from a string of length 4 [-Werror=stringop-truncation]
136 | return __builtin___strncat_chk (__dest, __src, __len, __bos (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Shawn Landden <shawn@git.icu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20190518183238.10954-1-shawn@git.icu Link: https://lkml.kernel.org/n/tip-289f1jice17ta7tr3tstm9jm@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the vfs_statx() context, during path lookup, the dentry gets
added to sd->s_dentry via configfs_attach_attr(). In the end,
vfs_statx() kills the dentry by calling path_put(), which invokes
configfs_d_iput(). Ideally, this dentry must be removed from
sd->s_dentry but it doesn't if the sd->s_count >= 3. As a result,
sd->s_dentry is holding reference to a stale dentry pointer whose
memory is already freed up. This results in use-after-free issue,
when this stale sd->s_dentry is accessed later in
configfs_readdir() path.
This issue can be easily reproduced, by running the LTP test case -
sh fs_racer_file_list.sh /config
(https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/fs/racer/fs_racer_file_list.sh)
Fixes: 76ae281f6307 ('configfs: fix race between dentry put and lookup') Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
We observed the same issue as reported by commit a8d7bde23e7130686b7662
("ALSA: hda - Force polling mode on CFL for fixing codec communication")
We don't have a better solution. So apply the same workaround to CNL.
Driver stops producing skbs on ring if a packet with FCS error
was coalesced into LRO session. Ring gets hang forever.
Thats a logical error in driver processing descriptors:
When rx_stat indicates MAC Error, next pointer and eop flags
are not filled. This confuses driver so it waits for descriptor 0
to be filled by HW.
Solution is fill next pointer and eop flag even for packets with FCS error.
Fixes: bab6de8fd180b ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In case no other traffic happening on the ring, full tx cleanup
may not be completed. That may cause socket buffer to overflow
and tx traffic to stuck until next activity on the ring happens.
This is due to logic error in budget variable decrementor.
Variable is compared with zero, and then post decremented,
causing it to become MAX_INT. Solution is remove decrementor
from the `for` statement and rewrite it in a clear way.
Fixes: b647d3980948e ("net: aquantia: Add tx clean budget and valid budget handling logic") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The devcoredump needs to operate on a stable state of the MMU while
it is writing the MMU state to the coredump. The missing lock
allowed both the userspace submit, as well as the GPU job finish
paths to mutate the MMU state while a coredump is under way.
Fixes: a8c21a5451d8 (drm/etnaviv: add initial etnaviv DRM driver) Reported-by: David Jander <david@protonic.nl> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: David Jander <david@protonic.nl> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Both acpi_pci_need_resume() and acpi_dev_needs_resume() check if the
current ACPI wakeup configuration of the device matches what is
expected as far as system wakeup from sleep states is concerned, as
reflected by the device_may_wakeup() return value for the device.
However, they only should do that if wakeup.flags.valid is set for
the device's ACPI companion, because otherwise the wakeup.prepare_count
value for it is meaningless.
Add the missing wakeup.flags.valid checks to these functions.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Building with Clang reports the redundant use of MODULE_DEVICE_TABLE():
drivers/net/ethernet/dec/tulip/de4x5.c:2110:1: error: redefinition of '__mod_eisa__de4x5_eisa_ids_device_table'
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
^
./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE'
extern typeof(name) __mod_##type##__##name##_device_table \
^
<scratch space>:90:1: note: expanded from here
__mod_eisa__de4x5_eisa_ids_device_table
^
drivers/net/ethernet/dec/tulip/de4x5.c:2100:1: note: previous definition is here
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
^
./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE'
extern typeof(name) __mod_##type##__##name##_device_table \
^
<scratch space>:85:1: note: expanded from here
__mod_eisa__de4x5_eisa_ids_device_table
^
This drops the one further from the table definition to match the common
use of MODULE_DEVICE_TABLE().
Fixes: 07563c711fbc ("EISA bus MODALIAS attributes support") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Use PTR_ERR_OR_ZERO instead of PTR_ERR in cases where
zero is a valid input. Reported by smatch.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Smatch reports a potential spectre vulnerability in the dpaa2-eth
driver, where the value of rxnfc->fs.location (which is provided
from user-space) is used as index in an array.
Add a call to array_index_nospec() to sanitize the access.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
1. the frequency of csr clock is 66.5MHz, so the csr_clk value should
be 0 other than 5.
2. the csr_clk can be got from device tree, so remove initialization here.
Fixes: 9992f37e346b ("stmmac: dwmac-mediatek: add support for mt2712") Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The specific clk_csr value can be zero, and
stmmac_clk is necessary for MDC clock which can be set dynamically.
So, change the condition from plat->clk_csr to plat->stmmac_clk to
fix clk_csr can't be zero issue.
Fixes: cd7201f477b9 ("stmmac: MDC clock dynamically based on the csr clock input") Signed-off-by: Biao Huang <biao.huang@mediatek.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently we will not update the receive descriptor tail pointer in
stmmac_rx_refill. Rx dma will think no available descriptors and stop
once received packets exceed DMA_RX_SIZE, so that the rx only test will fail.
Update the receive tail pointer in stmmac_rx_refill to add more descriptors
to the rx channel, so packets can be received continually
Fixes: 54139cf3bb33 ("net: stmmac: adding multiple buffers for rx") Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The gpio-adp5588 driver uses interfaces that are provided by
GPIOLIB_IRQCHIP, so select that symbol in its Kconfig entry.
Fixes these build errors:
../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_handler’:
../drivers/gpio/gpio-adp5588.c:266:26: error: ‘struct gpio_chip’ has no member named ‘irq’
dev->gpio_chip.irq.domain, gpio));
^
../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_setup’:
../drivers/gpio/gpio-adp5588.c:298:2: error: implicit declaration of function ‘gpiochip_irqchip_add_nested’ [-Werror=implicit-function-declaration]
ret = gpiochip_irqchip_add_nested(&dev->gpio_chip,
^
../drivers/gpio/gpio-adp5588.c:307:2: error: implicit declaration of function ‘gpiochip_set_nested_irqchip’ [-Werror=implicit-function-declaration]
gpiochip_set_nested_irqchip(&dev->gpio_chip,
^
Fixes: 459773ae8dbb ("gpio: adp5588-gpio: support interrupt controller") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: linux-gpio@vger.kernel.org Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Similar to how decrementing rb->next too early can cause data_head to
(temporarily) be observed to go backward, so too can this happen when
we increment too late.
This barrier() ensures the rb->head load happens after the increment,
both the one in the 'goto again' path, as the one from
perf_output_get_handle() -- albeit very unlikely to matter for the
latter.
Suggested-by: Yabin Cui <yabinc@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Cc: mark.rutland@arm.com Cc: namhyung@kernel.org Fixes: ef60777c9abd ("perf: Optimize the perf_output() path by removing IRQ-disables") Link: http://lkml.kernel.org/r/20190517115418.309516009@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In perf_output_put_handle(), an IRQ/NMI can happen in below location and
write records to the same ring buffer:
...
local_dec_and_test(&rb->nest)
... <-- an IRQ/NMI can happen here
rb->user_page->data_head = head;
...
In this case, a value A is written to data_head in the IRQ, then a value
B is written to data_head after the IRQ. And A > B. As a result,
data_head is temporarily decreased from A to B. And a reader may see
data_head < data_tail if it read the buffer frequently enough, which
creates unexpected behaviors.
This can be fixed by moving dec(&rb->nest) to after updating data_head,
which prevents the IRQ/NMI above from updating data_head.
[ Split up by peterz. ]
Signed-off-by: Yabin Cui <yabinc@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: mark.rutland@arm.com Fixes: ef60777c9abd ("perf: Optimize the perf_output() path by removing IRQ-disables") Link: http://lkml.kernel.org/r/20190517115418.224478157@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
For F17h AMD CPUs, the CPB capability ('Core Performance Boost') is forcibly set,
because some versions of that chip incorrectly report that they do not have it.
However, a hypervisor may filter out the CPB capability, for good
reasons. For example, KVM currently does not emulate setting the CPB
bit in MSR_K7_HWCR, and unchecked MSR access errors will be thrown
when trying to set it as a guest:
unchecked MSR access error: WRMSR to 0xc0010015 (tried to write 0x0000000001000011) at rIP: 0xffffffff890638f4 (native_write_msr+0x4/0x20)
To avoid this issue, don't forcibly set the CPB capability for a CPU
when running under a hypervisor.
Signed-off-by: Frank van der Linden <fllinden@amazon.com> Acked-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: jiaxun.yang@flygoat.com Fixes: 0237199186e7 ("x86/CPU/AMD: Set the CPB bit unconditionally on F17h") Link: http://lkml.kernel.org/r/20190522221745.GA15789@dev-dsk-fllinden-2c-c1893d73.us-west-2.amazon.com
[ Minor edits to the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The user can change the device_name with the IMSETDEVNAME ioctl, but we
need to ensure that the user's name is NUL terminated. Otherwise it
could result in a buffer overflow when we copy the name back to the user
with IMGETDEVINFO ioctl.
I also changed two strcpy() calls which handle the name to strscpy().
Hopefully, there aren't any other ways to create a too long name, but
it's nice to do this as a kernel hardening measure.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In xhci_debugfs_create_slot(), kzalloc() can fail and
dev->debugfs_private will be NULL.
In xhci_debugfs_create_endpoint(), dev->debugfs_private is used without
any null-pointer check, and can cause a null pointer dereference.
To fix this bug, a null-pointer check is added in
xhci_debugfs_create_endpoint().
This bug is found by a runtime fuzzing tool named FIZZER written by us.
Currently init_imc_pmu() can fail either because we try to register an
IMC unit with an invalid domain (i.e an IMC node not supported by the
kernel) or something went wrong while registering a valid IMC unit. In
both the cases kernel provides a 'Register failed' error message.
For example when trace-imc node is not supported by the kernel, but
skiboot advertises a trace-imc node we print:
IMC Unknown Device type
IMC PMU (null) Register failed
To avoid confusion just print the unknown device type message, before
attempting PMU registration, so the second message isn't printed.
Fixes: 8f95faaac56c ("powerpc/powernv: Detect and create IMC device") Reported-by: Pavaman Subramaniyam <pavsubra@in.ibm.com> Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Reword change log a bit] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
We need to always call clkdm_clk_enable() and clkdm_clk_disable() even
the clkctrl clock(s) enabled for the domain do not have any gate register
bits. Otherwise clockdomains may never get enabled except when devices get
probed with the legacy "ti,hwmods" devicetree property.
Fixes: 88a172526c32 ("clk: ti: add support for clkctrl clocks") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
A test for the basic NAT functionality uses ip command which needs veth
device. There is a condition where the kernel support for veth is not
compiled into the kernel and the test script breaks. This patch contains
code for reasonable error display and correct code exit.
Signed-off-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
while unregistering ipvs module, ops_free_list calls
__ip_vs_cleanup, then nf_unregister_net_hooks be called to
do remove nf hook entries. It need a RCU period to finish,
however net->ipvs is set to NULL immediately, which will
trigger NULL pointer dereference when a packet is hooked
and handled by ip_vs_in where net->ipvs is dereferenced.
Another scene is ops_free_list call ops_free to free the
net_generic directly while __ip_vs_cleanup finished, then
calling ip_vs_in will triggers use-after-free.
This patch moves nf_unregister_net_hooks from __ip_vs_cleanup()
to __ip_vs_dev_cleanup(), where rcu_barrier() is called by
unregister_pernet_device -> unregister_pernet_operations,
that will do the needed grace period.
Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: efe41606184e ("ipvs: convert to use pernet nf_hook api") Suggested-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
NFTA_FIB_F_PRESENT flag was not always honored since eval functions did
not call nft_fib_store_result in all cases.
Given that in all callsites there is a struct net_device pointer
available which holds the interface data to be stored in destination
register, simplify nft_fib_store_result() to just accept that pointer
instead of the nft_pktinfo pointer and interface index. This also
allows to drop the index to interface lookup previously needed to get
the name associated with given index.
Fixes: 055c4b34b94f6 ("netfilter: nft_fib: Support existence check") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch fixes netfilter hook traversal when there are more than 1 hooks
returning NF_QUEUE verdict. When the first queue reinjects the packet,
'nf_reinject' starts traversing hooks with a proper hook_index. However,
if it again receives a NF_QUEUE verdict (by some other netfilter hook), it
queues the packet with a wrong hook_index. So, when the second queue
reinjects the packet, it re-executes hooks in between.
Fixes: 960632ece694 ("netfilter: convert hook list to an array") Signed-off-by: Jagdish Motwani <jagdish.motwani@sophos.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
That patch modified INTEL_FLAGS_EVENT_CONSTRAINT() to only look at the event code
when matching a constraint. If code+umask were needed, then the
INTEL_FLAGS_UEVENT_CONSTRAINT() macro was needed instead.
This broke with some of the constraints for PEBS events.
Several of them, including the one used for cycles:p, cycles:pp, cycles:ppp
fell in that category and caused the event to be rejected in PEBS mode.
In other words, on some platforms a cmdline such as:
$ perf top -e cycles:pp
would fail with -EINVAL.
This patch fixes this bug by properly using INTEL_FLAGS_UEVENT_CONSTRAINT()
when needed in the PEBS constraint tables.
Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: kan.liang@intel.com Link: http://lkml.kernel.org/r/20190521005246.423-1-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Its not possible to fetch previous element in rcu-protected lists
when deletions are not prevented somehow: list_del_rcu poisons
the ->prev pointer value.
Before rcu-conversion this was safe as dump operations did hold
nfnetlink mutex.
Pass previous rule as argument, obtained by keeping a pointer to
the previous rule during traversal.
Fixes: d9adf22a291883 ("netfilter: nf_tables: use call_rcu in netlink dumps") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit a939bb57cd47 ("pinctrl: intel: implement gpio_irq_enable") was
added because clearing interrupt status bit is required to avoid
unexpected behavior.
Turns out the unmask callback also needs the fix, which can solve weird
IRQ triggering issues on I2C touchpad ELAN1200.
The MPU6050 driver has recently gained support for the
ICM20602 IMU, which is very similar to MPU6xxx. However,
the ICM20602's FIFO data specifically includes temperature
readings, which were not present on MPU6xxx parts. As a
result, the driver will under-read the ICM20602's FIFO
register, causing the same (partial) sample to be returned
for all reads, until the FIFO overflows.
Fix this by adding a table of scan elements specifically
for the ICM20602, which takes the extra temperature data
into consideration.
While we're at it, fix the temperature offset and scaling
on ICM20602, since it uses different scale/offset constants
than the rest of the MPU6xxx devices.
Signed-off-by: Steve Moskovchenko <stevemo@skydio.com> Fixes: 22904bdff978 ("iio: imu: mpu6050: Add support for the ICM 20602 IMU") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Alaa Hleihel [Sun, 26 May 2019 08:56:27 +0000 (11:56 +0300)]
net/mlx5e: Avoid detaching non-existing netdev under switchdev mode
After introducing dedicated uplink representor, the netdev instance
set over the esw manager vport (PF) became no longer in use, so it was
removed in the cited commit once we're on switchdev mode.
However, the mlx5e_detach function was not updated accordingly, and it
still tries to detach a non-existing netdev, causing a kernel crash.
But it missed that zerocopy need not be passed at the first send. The
right test whether the uarg is newly allocated and thus has extra
refcnt 1 is not !skb, but !skb_zcopy.
Fixes: 100f6d8e09905 ("net: correct zerocopy refcnt with udp MSG_MORE") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eli Britstein [Sun, 2 Jun 2019 13:47:59 +0000 (13:47 +0000)]
net/mlx5e: Support tagged tunnel over bond
Stacked devices like bond interface may have a VLAN device on top of
them. Detect lag state correctly under this condition, and return the
correct routed net device, according to it the encap header is built.
Fixes: e32ee6c78efa ("net/mlx5e: Support tunnel encap over tagged Ethernet") Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Petr Machata [Tue, 11 Jun 2019 07:19:45 +0000 (10:19 +0300)]
mlxsw: spectrum_buffers: Reduce pool size on Spectrum-2
Due to an issue on Spectrum-2, in front-panel ports split four ways, 2 out
of 32 port buffers cannot be used. To work around this, the next FW release
will mark them as unused, and will report correspondingly lower total
shared buffer size. mlxsw will pick up the new value through a query to
cap_total_buffer_size resource. However the initial size for shared buffer
pool 0 is hard-coded and therefore needs to be updated.
Thus reduce the pool size by 2.7 MiB (which corresponds to 2/32 of the
total size of 42 MiB), and round down to the whole number of cells.
Fixes: fe099bf682ab ("mlxsw: spectrum_buffers: Add Spectrum-2 shared buffer configuration") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Raed Salem [Sun, 2 Jun 2019 09:04:08 +0000 (12:04 +0300)]
net/mlx5e: Fix source port matching in fdb peer flow rule
The cited commit changed the initialization placement of the eswitch
attributes so it is done prior to parse tc actions function call,
including among others the in_rep and in_mdev fields which are mistakenly
reassigned inside the parse actions function.
This breaks the source port matching criteria of the peer redirect rule.
Fix by removing the now redundant reassignment of the already initialized
fields.
Jiri Pirko [Tue, 11 Jun 2019 07:19:43 +0000 (10:19 +0300)]
mlxsw: spectrum_flower: Fix TOS matching
The TOS value was not extracted correctly. Fix it.
Fixes: 87996f91f739 ("mlxsw: spectrum_flower: Add support for ip tos") Reported-by: Alexander Petrovskiy <alexpe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Mi [Thu, 16 May 2019 09:36:43 +0000 (17:36 +0800)]
net/mlx5e: Add ndo_set_feature for uplink representor
After we have a dedicated uplink representor, the new netdev ops
doesn't support ndo_set_feature. Because of that, we can't change
some features, eg. rxvlan. Now add it back.
In this patch, I also do a cleanup for the features flag handling,
eg. remove duplicate NETIF_F_HW_TC flag setting.
Fixes: aec002f6f82c ("net/mlx5e: Uninstantiate esw manager vport netdev on switchdev mode") Signed-off-by: Chris Mi <chrism@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Edward Srouji [Thu, 23 May 2019 16:45:38 +0000 (19:45 +0300)]
net/mlx5: Update pci error handler entries and command translation
Add missing entries for create/destroy UCTX and UMEM commands.
This could get us wrong "unknown FW command" error in flows
where we unbind the device or reset the driver.
Also the translation of these commands from opcodes to string
was missing.
Fixes: 6e3722baac04 ("IB/mlx5: Use the correct commands for UMEM and UCTX allocation") Signed-off-by: Edward Srouji <edwards@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using ethtool, users can specify a classification action matching on the
full vlan tag, which includes the DEI bit (also previously called CFI).
However, when converting the ethool_flow_spec to a flow_rule, we use
dissector keys to represent the matching patterns.
Since the vlan dissector key doesn't include the DEI bit, this
information was silently discarded when translating the ethtool
flow spec in to a flow_rule.
This commit adds the DEI bit into the vlan dissector key, and allows
propagating the information to the driver when parsing the ethtool flow
spec.
Fixes: eca4205f9ec3 ("ethtool: add ethtool_rx_flow_spec to flow_rule structure translator") Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If some of the switch ports were not listed in the device tree, due to
being unused, the ksz_mib_read_work function ended up accessing a NULL
dp->slave pointer and causing an oops. Skip checking statistics for any
unused ports.
Fixes: 7c6ff470aa867f53 ("net: dsa: microchip: add MIB counter reading support") Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When removing all VID filters, the mvpp2_prs_vid_entry_remove would be
called with the TCAM id incorrectly used as a VID, causing the wrong
TCAM entries to be invalidated.
Fix this by directly invalidating entries in the VID range.
Fixes: 56beda3db602 ("net: mvpp2: Add hardware offloading for VLAN filtering") Suggested-by: Yuri Chipchev <yuric@marvell.com> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit a07966447f39 ("geneve: ICMP error lookup handler") I wrongly
assumed buffers from icmp_socket_deliver() would be linear. This is not
the case: icmp_socket_deliver() only guarantees we have 8 bytes of linear
data.
Eric fixed this same issue for fou and fou6 in commits 26fc181e6cac
("fou, fou6: do not assume linear skbs") and 5355ed6388e2 ("fou, fou6:
avoid uninit-value in gue_err() and gue6_err()").
Use pskb_may_pull() instead of checking skb->len, and take into account
the fact we later access the GENEVE header with udp_hdr(), so we also
need to sum skb_transport_header() here.
Reported-by: Guillaume Nault <gnault@redhat.com> Fixes: a07966447f39 ("geneve: ICMP error lookup handler") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit c3a43b9fec8a ("vxlan: ICMP error lookup handler") I wrongly
assumed buffers from icmp_socket_deliver() would be linear. This is not
the case: icmp_socket_deliver() only guarantees we have 8 bytes of linear
data.
Eric fixed this same issue for fou and fou6 in commits 26fc181e6cac
("fou, fou6: do not assume linear skbs") and 5355ed6388e2 ("fou, fou6:
avoid uninit-value in gue_err() and gue6_err()").
Use pskb_may_pull() instead of checking skb->len, and take into account
the fact we later access the VXLAN header with udp_hdr(), so we also
need to sum skb_transport_header() here.
Reported-by: Guillaume Nault <gnault@redhat.com> Fixes: c3a43b9fec8a ("vxlan: ICMP error lookup handler") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alaa Hleihel [Sun, 19 May 2019 08:11:49 +0000 (11:11 +0300)]
net/mlx5: Avoid reloading already removed devices
Prior to reloading a device we must first verify that it was not already
removed. Otherwise, the attempt to remove the device will do nothing, and
in that case we will end up proceeding with adding an new device that no
one was expecting to remove, leaving behind used resources such as EQs that
causes a failure to destroy comp EQs and syndrome (0x30f433).
Fix that by making sure that we try to remove and add a device (based on a
protocol) only if the device is already added.
Set the SOCK_DONE flag to match the TCP_CLOSING state when a peer has
shut down and there is nothing left to read.
This fixes the following bug:
1) Peer sends SHUTDOWN(RDWR).
2) Socket enters TCP_CLOSING but SOCK_DONE is not set.
3) read() returns -ENOTCONN until close() is called, then returns 0.
Signed-off-by: Stephen Barber <smbarber@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Syzbot reported a memleak caused by grp members' deferredq list not
purged when the grp is be deleted.
The issue occurs when more(msg_grp_bc_seqno(hdr), m->bc_rcv_nxt) in
tipc_group_filter_msg() and the skb will stay in deferredq.
So fix it by calling __skb_queue_purge for each member's deferredq
in tipc_group_delete() when a tipc sk leaves the grp.
Fixes: b87a5ea31c93 ("tipc: guarantee group unicast doesn't bypass group broadcast") Reported-by: syzbot+78fbe679c8ca8d264a8d@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In d5a2aa24, the name in struct console sunhv_console was changed from "ttyS"
to "ttyHV" while the name in struct uart_ops sunhv_pops remained unchanged.
This results in the hypervisor console device to be listed as "ttyHV0" under
/proc/consoles while the device node is still named "ttyS0":
root@osaka:~# cat /proc/consoles
ttyHV0 -W- (EC p ) 4:64
tty0 -WU (E ) 4:1
root@osaka:~# readlink /sys/dev/char/4:64
../../devices/root/f02836f0/f0285690/tty/ttyS0
root@osaka:~#
This means that any userland code which tries to determine the name of the
device file of the hypervisor console device can not rely on the information
provided by /proc/consoles. In particular, booting current versions of debian-
installer inside a SPARC LDOM will fail with the installer unable to determine
the console device.
After renaming the device in struct uart_ops sunhv_pops to "ttyHV" as well,
the inconsistency is fixed and it is possible again to determine the name
of the device file of the hypervisor console device by reading the contents
of /proc/console:
root@osaka:~# cat /proc/consoles
ttyHV0 -W- (EC p ) 4:64
tty0 -WU (E ) 4:1
root@osaka:~# readlink /sys/dev/char/4:64
../../devices/root/f02836f0/f0285690/tty/ttyHV0
root@osaka:~#
With this change, debian-installer works correctly when installing inside
a SPARC LDOM.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on comments from Xin, even after fixes for our recent syzbot
report of cookie memory leaks, its possible to get a resend of an INIT
chunk which would lead to us leaking cookie memory.
To ensure that we don't leak cookie memory, free any previously
allocated cookie first.
Change notes
v1->v2
update subsystem tag in subject (davem)
repeat kfree check for peer_random and peer_hmacs (xin)
v2->v3
net->sctp
also free peer_chunks
v3->v4
fix subject tags
v4->v5
remove cut line
Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: syzbot+f7e9153b037eac9b1df8@syzkaller.appspotmail.com CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> CC: Xin Long <lucien.xin@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check that the NFC_ATTR_TARGET_INDEX attributes (in addition to
NFC_ATTR_DEVICE_INDEX) are provided by the netlink client prior to
accessing them. This prevents potential unhandled NULL pointer dereference
exceptions which can be triggered by malicious user-mode programs,
if they omit one or both of these attributes.
Signed-off-by: Young Xiao <92siuyang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tls_sw_do_sendpage needs to return the total number of bytes sent
regardless of how many sk_msgs are allocated. Unfortunately, copied
(the value we return up the stack) is zero'd before each new sk_msg
is allocated so we only return the copied size of the last sk_msg used.
The caller (splice, etc.) of sendpage will then believe only part
of its data was sent and send the missing chunks again. However,
because the data actually was sent the receiver will get multiple
copies of the same data.
To reproduce this do multiple sendfile calls with a length close to
the max record size. This will in turn call splice/sendpage, sendpage
may use multiple sk_msg in this case and then returns the incorrect
number of bytes. This will cause splice to resend creating duplicate
data on the receiver. Andre created a C program that can easily
generate this case so we will push a similar selftest for this to
bpf-next shortly.
The fix is to _not_ zero the copied field so that the total sent
bytes is returned.
Reported-by: Steinar H. Gunderson <steinar+kernel@gunderson.no> Reported-by: Andre Tomt <andre@tomt.net> Tested-by: Andre Tomt <andre@tomt.net> Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to create an internal vport, internal_dev_create() is used and
that calls register_netdevice() internally.
If register_netdevice() fails, it calls dev->priv_destructor() to free
private data of netdev. actually, a private data of this is a vport.
Hence internal_dev_create() should not free and use a vport after failure
of register_netdevice().
Fixes: cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state.") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We get this regression when using RTL8366RB as part of a bridge
with OpenWrt:
WARNING: CPU: 0 PID: 1347 at net/switchdev/switchdev.c:291
switchdev_port_attr_set_now+0x80/0xa4
lan0: Commit of attribute (id=7) failed.
(...)
realtek-smi switch lan0: failed to initialize vlan filtering on this port
This is because it is trying to disable VLAN filtering
on VLAN0, as we have forgot to add 1 to the port number
to get the right VLAN in rtl8366_vlan_filtering(): when
we initialize the VLAN we associate VLAN1 with port 0,
VLAN2 with port 1 etc, so we need to add 1 to the port
offset.
Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nine years ago, I added RCU handling to neighbours, not pneighbours.
(pneigh are not commonly used)
Unfortunately I missed that /proc dump operations would use a
common entry and exit point : neigh_seq_start() and neigh_seq_stop()
We need to read_lock(tbl->lock) or risk use-after-free while
iterating the pneigh structures.
We might later convert pneigh to RCU and revert this patch.
sysbot reported :
BUG: KASAN: use-after-free in pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158
Read of size 8 at addr ffff888097f2a700 by task syz-executor.0/9825
Memory state around the buggy address: ffff888097f2a600: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc ffff888097f2a680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff888097f2a700: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
^ ffff888097f2a780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff888097f2a800: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
Fixes: 767e97e1e0db ("neigh: RCU conversion of struct neighbour") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lapb_register calls lapb_create_cb, which initializes the control-
block's ref-count to one, and __lapb_insert_cb, which increments it when
adding the new block to the list of blocks.
lapb_unregister calls __lapb_remove_cb, which decrements the ref-count
when removing control-block from the list of blocks, and calls lapb_put
itself to decrement the ref-count before returning.
However, lapb_unregister also calls __lapb_devtostruct to look up the
right control-block for the given net_device, and __lapb_devtostruct
also bumps the ref-count, which means that when lapb_unregister returns
the ref-count is still 1 and the control-block is leaked.
Call lapb_put after __lapb_devtostruct to fix leak.
Reported-by: syzbot+afb980676c836b4a0afa@syzkaller.appspotmail.com Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before taking a refcount, make sure the object is not already
scheduled for deletion.
Same fix is needed in ipv6_flowlabel_opt()
Fixes: 18367681a10b ("ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For better consistency of synthetic NIC names, we set the probe mode to
PROBE_FORCE_SYNCHRONOUS. So the names can be aligned with the vmbus
channel offer sequence.
Fixes: af0a5646cb8d ("use the new async probing feature for the hyperv drivers") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Number of Rx queues used for flow hashing returned by the driver is
incorrect and this bug prevents user to use the last Rx queue in
indirection table.
Fixes: 594ad54a2c3b ("be2net: Add support for setting and getting rx flow hash options") Reported-by: Tianhao <tizhao@redhat.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
