x86/retpolines: Enable the default thunk warning only on relevant configs
The using-default-thunk warning check makes sense only with
configurations which actually enable the special return thunks.
Otherwise, it fires on unrelated 32-bit configs on which the special
return thunks won't even work (they're 64-bit only) and, what is more,
those configs even go off into the weeds when booting in the
alternatives patching code, leading to a dead machine.
Alex Deucher [Mon, 8 Apr 2024 17:30:15 +0000 (13:30 -0400)]
drm/radeon: silence UBSAN warning (v3)
Convert a variable sized array from [1] to [].
v2: fix up a few more.
v3: integrate comments from Kees.
Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Jeff Johnson <quic_jjohnson@quicinc.com> (v2) Acked-by: Christian König <christian.koenig@amd.com> (v1) Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: keescook@chromium.org
Alex Deucher [Mon, 15 Apr 2024 02:06:08 +0000 (22:06 -0400)]
drm/radeon: make -fstrict-flex-arrays=3 happy
The driver parses a union where the layout up through the first
array is the same, however, the array has different sizes
depending on the elements in the union. Be explicit to
fix the UBSAN checker.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3323 Fixes: df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Kees Cook <keescook@chromium.org>
xinhui pan [Thu, 11 Apr 2024 03:11:38 +0000 (11:11 +0800)]
drm/amdgpu: validate the parameters of bo mapping operations more clearly
Verify the parameters of
amdgpu_vm_bo_(map/replace_map/clearing_mappings) in one common place.
Fixes: dc54d3d1744d ("drm/amdgpu: implement AMDGPU_VA_OP_CLEAR v2") Cc: stable@vger.kernel.org Reported-by: Vlad Stolyarov <hexed@google.com> Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Paolo Bonzini [Wed, 17 Apr 2024 15:42:51 +0000 (11:42 -0400)]
Merge branch 'svm' of https://github.com/kvm-x86/linux into HEAD
Clean up SVM's enter/exit assembly code so that it can be compiled
without OBJECT_FILES_NON_STANDARD. The "standard" __svm_vcpu_run() can't
be made 100% bulletproof, as RBP isn't restored on #VMEXIT, but that's
also the case for __vmx_vcpu_run(), and getting "close enough" is better
than not even trying.
As for SEV-ES, after yet another refresher on swap types, I realized
KVM can simply let the hardware restore registers after #VMEXIT, all
that's missing is storing the current values to the host save area
(they are swap type B). This should provide 100% accuracy when using
stack frames for unwinding, and requires less assembly.
In between, build the SEV-ES code iff CONFIG_KVM_AMD_SEV=y, and yank out
"support" for 32-bit kernels in __svm_sev_es_vcpu_run, which was
unnecessarily polluting the code for a configuration that is disabled
at build time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
netfilter: nf_tables: restore set elements when delete set fails
From abort path, nft_mapelem_activate() needs to restore refcounters to
the original state. Currently, it uses the set->ops->walk() to iterate
over these set elements. The existing set iterator skips inactive
elements in the next generation, this does not work from the abort path
to restore the original state since it has to skip active elements
instead (not inactive ones).
This patch moves the check for inactive elements to the set iterator
callback, then it reverses the logic for the .activate case which
needs to skip active elements.
Toggle next generation bit for elements when delete set command is
invoked and call nft_clear() from .activate (abort) path to restore the
next generation bit.
The splat below shows an object in mappings memleak:
Fixes: 628bd3e49cba ("netfilter: nf_tables: drop map element references from preparation phase") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Sven Schnelle [Mon, 15 Apr 2024 05:52:13 +0000 (07:52 +0200)]
s390/mm: Fix NULL pointer dereference
The recently added check to figure out if a fault happened on gmap ASCE
dereferences the gmap pointer in lowcore without checking that it is not
NULL. For all non-KVM processes the pointer is NULL, so that some value
from lowcore will be read. With the current layouts of struct gmap and
struct lowcore the read value (aka ASCE) is zero, so that this doesn't lead
to any observable bug; at least currently.
Fix this by adding the missing NULL pointer check.
Fixes: 64c3431808bd ("s390/entry: compare gmap asce to determine guest/host fault") Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
This change breaks DSC on 4k monitors at 144Hz over USB-C.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3254 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Muhammad Ahmed <ahmed.ahmed@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Charlene Liu <charlene.liu@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org
Felix Kuehling [Wed, 10 Apr 2024 19:52:10 +0000 (15:52 -0400)]
drm/amdkfd: Fix memory leak in create_process failure
Fix memory leak due to a leaked mmget reference on an error handling
code path that is triggered when attempting to create KFD processes
while a GPU reset is in progress.
The majority of those where removed in the commit aed01a68047b
("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2")
But this one was missed because it's working on the resource and not the
BO. Since we also no longer use a fake start address for visible BOs
this will now trigger invalid mapping errors.
v2: also remove the unused variable
Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: aed01a68047b ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2") CC: stable@vger.kernel.org Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
platform/x86/amd/pmc: Extend Framework 13 quirk to more BIOSes
BIOS 03.05 still hasn't fixed the spurious IRQ1 issue. As it's still
being worked on there is still a possibility that it won't need to
apply to future BIOS releases.
Add a quirk for BIOS 03.05 as well.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240410141046.433-1-mario.limonciello@amd.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Matthew Auld [Fri, 12 Apr 2024 11:31:45 +0000 (12:31 +0100)]
drm/xe/vm: prevent UAF with asid based lookup
The asid is only erased from the xarray when the vm refcount reaches
zero, however this leads to potential UAF since the xe_vm_get() only
works on a vm with refcount != 0. Since the asid is allocated in the vm
create ioctl, rather erase it when closing the vm, prior to dropping the
potential last ref. This should also work when user closes driver fd
without explicit vm destroy.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1594 Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412113144.259426-4-matthew.auld@intel.com
(cherry picked from commit 83967c57320d0d01ae512f10e79213f81e4bf594) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Since [1], dma_alloc_coherent() does not accept requests for GFP_COMP
anymore, even on archs that may be able to fulfill this. Functionality that
relied on the receive buffer being a compound page broke at that point:
The SMC-D protocol, that utilizes the ism device driver, passes receive
buffers to the splice processor in a struct splice_pipe_desc with a
single entry list of struct pages. As the buffer is no longer a compound
page, the splice processor now rejects requests to handle more than a
page worth of data.
Replace dma_alloc_coherent() and allocate a buffer with folio_alloc and
create a DMA map for it with dma_map_page(). Since only receive buffers
on ISM devices use DMA, qualify the mapping as FROM_DEVICE.
Since ISM devices are available on arch s390, only, and on that arch all
DMA is coherent, there is no need to introduce and export some kind of
dma_sync_to_cpu() method to be called by the SMC-D protocol layer.
Analogously, replace dma_free_coherent by a two step dma_unmap_page,
then folio_put to free the receive buffer.
Fixes: c08004eede4b ("s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent") Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
random: handle creditable entropy from atomic process context
The entropy accounting changes a static key when the RNG has
initialized, since it only ever initializes once. Static key changes,
however, cannot be made from atomic context, so depending on where the
last creditable entropy comes from, the static key change might need to
be deferred to a worker.
Previously the code used the execute_in_process_context() helper
function, which accounts for whether or not the caller is
in_interrupt(). However, that doesn't account for the case where the
caller is actually in process context but is holding a spinlock.
This turned out to be the case with input_handle_event() in
drivers/input/input.c contributing entropy:
According to Guoyong, it's not really possible to refactor the various
drivers to never hold a spinlock there. And in_atomic() isn't reliable.
So, rather than trying to be too fancy, just punt the change in the
static key to a workqueue always. There's basically no drawback of doing
this, as the code already needed to account for the static key not
changing immediately, and given that it's just an optimization, there's
not exactly a hurry to change the static key right away, so deferal is
fine.
Reported-by: Guoyong Wang <guoyong.wang@mediatek.com> Cc: stable@vger.kernel.org Fixes: f5bda35fba61 ("random: use static branch for crng_ready()") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
serial: stm32: Reset .throttled state in .startup()
When an UART is opened that still has .throttled set from a previous
open, the RX interrupt is enabled but the irq handler doesn't consider
it. This easily results in a stuck irq with the effect to occupy the CPU
in a tight loop.
So reset the throttle state in .startup() to ensure that RX irqs are
handled.
serial: stm32: Return IRQ_NONE in the ISR if no handling happend
If there is a stuck irq that the handler doesn't address, returning
IRQ_HANDLED unconditionally makes it impossible for the irq core to
detect the problem and disable the irq. So only return IRQ_HANDLED if
an event was handled.
A stuck irq is still problematic, but with this change at least it only
makes the UART nonfunctional instead of occupying the (usually only) CPU
by 100% and so stall the whole machine.
David S. Miller [Wed, 17 Apr 2024 07:56:51 +0000 (08:56 +0100)]
Merge branch 'mt7530-fixes'
Merge branch 'mr7530-fixes'
Arınç ÜNAL says:
====================
Fix port mirroring on MT7530 DSA subdriver
This patch series fixes the frames received on the local port (monitor
port) not being mirrored, and port mirroring for the MT7988 SoC switch.
====================
net: dsa: mt7530: fix port mirroring for MT7988 SoC switch
The "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open Version)
v0.1" document shows bits 16 to 18 as the MIRROR_PORT field of the CPU
forward control register. Currently, the MT7530 DSA subdriver configures
bits 0 to 2 of the CPU forward control register which breaks the port
mirroring feature for the MT7988 SoC switch.
Fix this by using the MT7531_MIRROR_PORT_GET() and MT7531_MIRROR_PORT_SET()
macros which utilise the correct bits.
Fixes: 110c18bfed41 ("net: dsa: mt7530: introduce driver for MT7988 built-in switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: mt7530: fix mirroring frames received on local port
This switch intellectual property provides a bit on the ARL global control
register which controls allowing mirroring frames which are received on the
local port (monitor port). This bit is unset after reset.
This ability must be enabled to fully support the port mirroring feature on
this switch intellectual property.
Therefore, this patch fixes the traffic not being reflected on a port,
which would be configured like below:
tc qdisc add dev swp0 clsact
tc filter add dev swp0 ingress matchall skip_sw \
action mirred egress mirror dev swp0
As a side note, this configuration provides the hairpinning feature for a
single port.
Fixes: 37feab6076aa ("net: dsa: mt7530: add support for port mirroring") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lei Chen [Mon, 15 Apr 2024 02:02:46 +0000 (22:02 -0400)]
tun: limit printing rate when illegal packet received by tun dev
vhost_worker will call tun call backs to receive packets. If too many
illegal packets arrives, tun_do_read will keep dumping packet contents.
When console is enabled, it will costs much more cpu time to dump
packet and soft lockup will be detected.
net_ratelimit mechanism can be used to limit the dumping rate.
Fixes: ef3db4a59542 ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <lei.chen@smartx.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bcachefs: Fix format specifier in validate_bset_keys()
When building for 32-bit platforms, for which size_t is 'unsigned int',
there is a warning from a format string in validate_bset_keys():
fs/bcachefs/btree_io.c: In function 'validate_bset_keys':
fs/bcachefs/btree_io.c:891:34: error: format '%lu' expects argument of type 'long unsigned int', but argument 12 has type 'unsigned int' [-Werror=format=]
891 | "bad k->u64s %u (min %u max %lu)", k->u64s,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/bcachefs/btree_io.c:603:32: note: in definition of macro 'btree_err'
603 | msg, ##__VA_ARGS__); \
| ^~~
fs/bcachefs/btree_io.c:887:21: note: in expansion of macro 'btree_err_on'
887 | if (btree_err_on(!bkeyp_u64s_valid(&b->format, k),
| ^~~~~~~~~~~~
fs/bcachefs/btree_io.c:891:64: note: format string is defined here
891 | "bad k->u64s %u (min %u max %lu)", k->u64s,
| ~~^
| |
| long unsigned int
| %u
cc1: all warnings being treated as errors
BKEY_U64s is size_t so the entire expression is promoted to size_t. Use
the '%zu' specifier so that there is no warning regardless of the width
of size_t.
Fixes: 031ad9e7dbd1 ("bcachefs: Check for packed bkeys that are too big") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404130747.wH6Dd23p-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202404131536.HdAMBOVc-lkp@intel.com/ Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Jeongjun Park [Mon, 15 Apr 2024 18:20:48 +0000 (03:20 +0900)]
nilfs2: fix OOB in nilfs_set_de_type
The size of the nilfs_type_by_mode array in the fs/nilfs2/dir.c file is
defined as "S_IFMT >> S_SHIFT", but the nilfs_set_de_type() function,
which uses this array, specifies the index to read from the array in the
same way as "(mode & S_IFMT) >> S_SHIFT".
However, when the index is determined this way, an out-of-bounds (OOB)
error occurs by referring to an index that is 1 larger than the array size
when the condition "mode & S_IFMT == S_IFMT" is satisfied. Therefore, a
patch to resize the nilfs_type_by_mode array should be applied to prevent
OOB errors.
Miaohe Lin [Wed, 10 Apr 2024 09:14:41 +0000 (17:14 +0800)]
fork: defer linking file vma until vma is fully initialized
Thorvald reported a WARNING [1]. And the root cause is below race:
CPU 1 CPU 2
fork hugetlbfs_fallocate
dup_mmap hugetlbfs_punch_hole
i_mmap_lock_write(mapping);
vma_interval_tree_insert_after -- Child vma is visible through i_mmap tree.
i_mmap_unlock_write(mapping);
hugetlb_dup_vma_private -- Clear vma_lock outside i_mmap_rwsem!
i_mmap_lock_write(mapping);
hugetlb_vmdelete_list
vma_interval_tree_foreach
hugetlb_vma_trylock_write -- Vma_lock is cleared.
tmp->vm_ops->open -- Alloc new vma_lock outside i_mmap_rwsem!
hugetlb_vma_unlock_write -- Vma_lock is assigned!!!
i_mmap_unlock_write(mapping);
hugetlb_dup_vma_private() and hugetlb_vm_op_open() are called outside
i_mmap_rwsem lock while vma lock can be used in the same time. Fix this
by deferring linking file vma until vma is fully initialized. Those vmas
should be initialized first before they can be used.
Link: https://lkml.kernel.org/r/20240410091441.3539905-1-linmiaohe@huawei.com Fixes: 8d9bfb260814 ("hugetlb: add vma based lock for pmd sharing") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reported-by: Thorvald Natvig <thorvald@google.com> Closes: https://lore.kernel.org/linux-mm/20240129161735.6gmjsswx62o4pbja@revolver/T/ [1] Reviewed-by: Jane Chu <jane.chu@oracle.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Mateusz Guzik <mjguzik@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peng Zhang <zhangpeng.00@bytedance.com> Cc: Tycho Andersen <tandersen@netflix.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/shmem: inline shmem_is_huge() for disabled transparent hugepages
In order to minimize code size (CONFIG_CC_OPTIMIZE_FOR_SIZE=y),
compiler might choose to make a regular function call (out-of-line) for
shmem_is_huge() instead of inlining it. When transparent hugepages are
disabled (CONFIG_TRANSPARENT_HUGEPAGE=n), it can cause compilation
error.
mm/shmem.c: In function `shmem_getattr':
./include/linux/huge_mm.h:383:27: note: in expansion of macro `BUILD_BUG'
383 | #define HPAGE_PMD_SIZE ({ BUILD_BUG(); 0; })
| ^~~~~~~~~
mm/shmem.c:1148:33: note: in expansion of macro `HPAGE_PMD_SIZE'
1148 | stat->blksize = HPAGE_PMD_SIZE;
To prevent the possible error, always inline shmem_is_huge() when
transparent hugepages are disabled.
Oscar Salvador [Tue, 9 Apr 2024 13:17:15 +0000 (15:17 +0200)]
mm,page_owner: defer enablement of static branch
Kefeng Wang reported that he was seeing some memory leaks with kmemleak
with page_owner enabled.
The reason is that we enable the page_owner_inited static branch and then
proceed with the linking of stack_list struct to dummy_stack, which means
that exists a race window between these two steps where we can have pages
already being allocated calling add_stack_record_to_list(), allocating
objects and linking them to stack_list, but then we set stack_list
pointing to dummy_stack in init_page_owner. Which means that the objects
that have been allocated during that time window are unreferenced and
lost.
Fix this by deferring the enablement of the branch until we have properly
set up the list.
Link: https://lkml.kernel.org/r/20240409131715.13632-1-osalvador@suse.de Fixes: 4bedfb314bdd ("mm,page_owner: maintain own list of stack_records structs") Signed-off-by: Oscar Salvador <osalvador@suse.de> Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com> Closes: https://lore.kernel.org/linux-mm/74b147b0-718d-4d50-be75-d6afc801cd24@huawei.com/ Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Squashfs: check the inode number is not the invalid value of zero
Syskiller has produced an out of bounds access in fill_meta_index().
That out of bounds access is ultimately caused because the inode
has an inode number with the invalid value of zero, which was not checked.
The reason this causes the out of bounds access is due to following
sequence of events:
1. Fill_meta_index() is called to allocate (via empty_meta_index())
and fill a metadata index. It however suffers a data read error
and aborts, invalidating the newly returned empty metadata index.
It does this by setting the inode number of the index to zero,
which means unused (zero is not a valid inode number).
2. When fill_meta_index() is subsequently called again on another
read operation, locate_meta_index() returns the previous index
because it matches the inode number of 0. Because this index
has been returned it is expected to have been filled, and because
it hasn't been, an out of bounds access is performed.
This patch adds a sanity check which checks that the inode number
is not zero when the inode is created and returns -EINVAL if it is.
Oscar Salvador [Sun, 7 Apr 2024 13:05:37 +0000 (15:05 +0200)]
mm,swapops: update check in is_pfn_swap_entry for hwpoison entries
Tony reported that the Machine check recovery was broken in v6.9-rc1, as
he was hitting a VM_BUG_ON when injecting uncorrectable memory errors to
DRAM.
After some more digging and debugging on his side, he realized that this
went back to v6.1, with the introduction of 'commit 0d206b5d2e0d
("mm/swap: add swp_offset_pfn() to fetch PFN from swap entry")'. That
commit, among other things, introduced swp_offset_pfn(), replacing
hwpoison_entry_to_pfn() in its favour.
The patch also introduced a VM_BUG_ON() check for is_pfn_swap_entry(), but
is_pfn_swap_entry() never got updated to cover hwpoison entries, which
means that we would hit the VM_BUG_ON whenever we would call
swp_offset_pfn() for such entries on environments with CONFIG_DEBUG_VM
set. Fix this by updating the check to cover hwpoison entries as well,
and update the comment while we are it.
Link: https://lkml.kernel.org/r/20240407130537.16977-1-osalvador@suse.de Fixes: 0d206b5d2e0d ("mm/swap: add swp_offset_pfn() to fetch PFN from swap entry") Signed-off-by: Oscar Salvador <osalvador@suse.de> Reported-by: Tony Luck <tony.luck@intel.com> Closes: https://lore.kernel.org/all/Zg8kLSl2yAlA3o5D@agluck-desk3/ Tested-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Miaohe Lin <linmiaohe@huawei.com> Cc: <stable@vger.kernel.org> [6.1.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This issue won't occur until commit a6b40850c442 ("mm: hugetlb: replace
hugetlb_free_vmemmap_enabled with a static_key"). As it introduced
rlock(cpu_hotplug_lock) in dissolve_free_huge_page() code path while
lock(pcp_batch_high_lock) is already in the __page_handle_poison().
[linmiaohe@huawei.com: extend comment per Oscar]
[akpm@linux-foundation.org: reflow block comment] Link: https://lkml.kernel.org/r/20240407085456.2798193-1-linmiaohe@huawei.com Fixes: a6b40850c442 ("mm: hugetlb: replace hugetlb_free_vmemmap_enabled with a static_key") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Jane Chu <jane.chu@oracle.com> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 5 Apr 2024 23:19:20 +0000 (19:19 -0400)]
mm/userfaultfd: allow hugetlb change protection upon poison entry
After UFFDIO_POISON, there can be two kinds of hugetlb pte markers, either
the POISON one or UFFD_WP one.
Allow change protection to run on a poisoned marker just like !hugetlb
cases, ignoring the marker irrelevant of the permission.
Here the two bits are mutual exclusive. For example, when install a
poisoned entry it must not be UFFD_WP already (by checking pte_none()
before such install). And it also means if UFFD_WP is set there must have
no POISON bit set. It makes sense because UFFD_WP is a bit to reflect
permission, and permissions do not apply if the pte is poisoned and
destined to sigbus.
So here we simply check uffd_wp bit set first, do nothing otherwise.
Attach the Fixes to UFFDIO_POISON work, as before that it should not be
possible to have poison entry for hugetlb (e.g., hugetlb doesn't do swap,
so no chance of swapin errors).
Oscar Salvador [Thu, 4 Apr 2024 07:07:02 +0000 (09:07 +0200)]
mm,page_owner: fix printing of stack records
When seq_* code sees that its buffer overflowed, it re-allocates a bigger
onecand calls seq_operations->start() callback again. stack_start()
naively though that if it got called again, it meant that the old record
got already printed so it returned the next object, but that is not true.
The consequence of that is that every time stack_stop() -> stack_start()
get called because we needed a bigger buffer, stack_start() will skip
entries, and those will not be printed.
Fix it by not advancing to the next object in stack_start().
Link: https://lkml.kernel.org/r/20240404070702.2744-5-osalvador@suse.de Fixes: 765973a09803 ("mm,page_owner: display all stacks and their count") Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alexander Potapenko <glider@google.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Marco Elver <elver@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Oscar Salvador [Thu, 4 Apr 2024 07:07:01 +0000 (09:07 +0200)]
mm,page_owner: fix accounting of pages when migrating
Upon migration, new allocated pages are being given the handle of the old
pages. This is problematic because it means that for the stack which
allocated the old page, we will be substracting the old page + the new one
when that page is freed, creating an accounting imbalance.
There is an interest in keeping it that way, as otherwise the output will
biased towards migration stacks should those operations occur often, but
that is not really helpful.
The link from the new page to the old stack is being performed by calling
__update_page_owner_handle() in __folio_copy_owner(). The only thing that
is left is to link the migrate stack to the old page, so the old page will
be subtracted from the migrate stack, avoiding by doing so any possible
imbalance.
Link: https://lkml.kernel.org/r/20240404070702.2744-4-osalvador@suse.de Fixes: 217b2119b9e2 ("mm,page_owner: implement the tracking of the stacks count") Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alexander Potapenko <glider@google.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Marco Elver <elver@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Oscar Salvador [Thu, 4 Apr 2024 07:07:00 +0000 (09:07 +0200)]
mm,page_owner: fix refcount imbalance
Current code does not contemplate scenarios were an allocation and free
operation on the same pages do not handle it in the same amount at once.
To give an example, page_alloc_exact(), where we will allocate a page of
enough order to stafisfy the size request, but we will free the remainings
right away.
In the above example, we will increment the stack_record refcount only
once, but we will decrease it the same number of times as number of unused
pages we have to free. This will lead to a warning because of refcount
imbalance.
Fix this by recording the number of base pages in the refcount field.
Link: https://lkml.kernel.org/r/20240404070702.2744-3-osalvador@suse.de Reported-by: syzbot+41bbfdb8d41003d12c0f@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-mm/00000000000090e8ff0613eda0e5@google.com Fixes: 217b2119b9e2 ("mm,page_owner: implement the tracking of the stacks count") Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Marco Elver <elver@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Oscar Salvador [Thu, 4 Apr 2024 07:06:59 +0000 (09:06 +0200)]
mm,page_owner: update metadata for tail pages
Patch series "page_owner: Fix refcount imbalance and print fixup", v4.
This series consists of a refactoring/correctness of updating the metadata
of tail pages, a couple of fixups for the refcounting part and a fixup for
the stack_start() function.
From this series on, instead of counting the stacks, we count the
outstanding nr_base_pages each stack has, which gives us a much better
memory overview. The other fixup is for the migration part.
A more detailed explanation can be found in the changelog of the
respective patches.
This patch (of 4):
__set_page_owner_handle() and __reset_page_owner() update the metadata of
all pages when the page is of a higher-order, but we miss to do the same
when the pages are migrated. __folio_copy_owner() only updates the
metadata of the head page, meaning that the information stored in the
first page and the tail pages will not match.
Strictly speaking that is not a big problem because 1) we do not print
tail pages and 2) upon splitting all tail pages will inherit the metadata
of the head page, but it is better to have all metadata in check should
there be any problem, so it can ease debugging.
For that purpose, a couple of helpers are created
__update_page_owner_handle() which updates the metadata on allocation, and
__update_page_owner_free_handle() which does the same when the page is
freed.
__folio_copy_owner() will make use of both as it needs to entirely replace
the page_owner metadata for the new page.
Link: https://lkml.kernel.org/r/20240404070702.2744-1-osalvador@suse.de Link: https://lkml.kernel.org/r/20240404070702.2744-2-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Marco Elver <elver@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
userfaultfd: change src_folio after ensuring it's unpinned in UFFDIO_MOVE
Commit d7a08838ab74 ("mm: userfaultfd: fix unexpected change to src_folio
when UFFDIO_MOVE fails") moved the src_folio->{mapping, index} changing to
after clearing the page-table and ensuring that it's not pinned. This
avoids failure of swapout+migration and possibly memory corruption.
However, the commit missed fixing it in the huge-page case.
Link: https://lkml.kernel.org/r/20240404171726.2302435-1-lokeshgidra@google.com Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI") Signed-off-by: Lokesh Gidra <lokeshgidra@google.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Nicolas Geoffray <ngeoffray@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/madvise: make MADV_POPULATE_(READ|WRITE) handle VM_FAULT_RETRY properly
Darrick reports that in some cases where pread() would fail with -EIO and
mmap()+access would generate a SIGBUS signal, MADV_POPULATE_READ /
MADV_POPULATE_WRITE will keep retrying forever and not fail with -EFAULT.
While the madvise() call can be interrupted by a signal, this is not the
desired behavior. MADV_POPULATE_READ / MADV_POPULATE_WRITE should behave
like page faults in that case: fail and not retry forever.
A reproducer can be found at [1].
The reason is that __get_user_pages(), as called by
faultin_vma_page_range(), will not handle VM_FAULT_RETRY in a proper way:
it will simply return 0 when VM_FAULT_RETRY happened, making
madvise_populate()->faultin_vma_page_range() retry again and again, never
setting FOLL_TRIED->FAULT_FLAG_TRIED for __get_user_pages().
__get_user_pages_locked() does what we want, but duplicating that logic in
faultin_vma_page_range() feels wrong.
So let's use __get_user_pages_locked() instead, that will detect
VM_FAULT_RETRY and set FOLL_TRIED when retrying, making the fault handler
return VM_FAULT_SIGBUS (VM_FAULT_ERROR) at some point, propagating -EFAULT
from faultin_page() to __get_user_pages(), all the way to
madvise_populate().
But, there is an issue: __get_user_pages_locked() will end up re-taking
the MM lock and then __get_user_pages() will do another VMA lookup. In
the meantime, the VMA layout could have changed and we'd fail with
different error codes than we'd want to.
As __get_user_pages() will currently do a new VMA lookup either way, let
it do the VMA handling in a different way, controlled by a new
FOLL_MADV_POPULATE flag, effectively moving these checks from
madvise_populate() + faultin_page_range() in there.
With this change, Darricks reproducer properly fails with -EFAULT, as
documented for MADV_POPULATE_READ / MADV_POPULATE_WRITE.
The DSI device for the panel was registered by the DSI host, so it is an
error to unregister it from the panel driver. Drop the call to
mipi_dsi_device_unregister().
The DSI device for the panel was registered by the DSI host, so it is an
error to unregister it from the panel driver. Drop the call to
mipi_dsi_device_unregister().
Marcin Szycik [Tue, 9 Apr 2024 15:45:44 +0000 (17:45 +0200)]
ice: Fix checking for unsupported keys on non-tunnel device
Add missing FLOW_DISSECTOR_KEY_ENC_* checks to TC flower filter parsing.
Without these checks, it would be possible to add filters with tunnel
options on non-tunnel devices. enc_* options are only valid for tunnel
devices.
Example:
devlink dev eswitch set $PF1_PCI mode switchdev
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
tc qdisc add dev $VF1_PR ingress
ethtool -K $PF1 hw-tc-offload on
tc filter add dev $VF1_PR ingress flower enc_ttl 12 skip_sw action drop
Fixes: 9e300987d4a8 ("ice: VXLAN and Geneve TC support") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The check for flags is done to not pass empty lookups to adding switch
rule functions. Since metadata is always added to lookups there is no
need to check against the flag.
It is also fixing the problem with such rule:
$ tc filter add dev gtp_dev ingress protocol ip prio 0 flower \
enc_dst_port 2123 action drop
Switch block in case of GTP can't parse the destination port, because it
should always be set to GTP specific value. The same with ethertype. The
result is that there is no other matching criteria than GTP tunnel. In
this case flags is 0, rule can't be added only because of defensive
check against flags.
Fixes: 9a225f81f540 ("ice: Support GTP-U and GTP-C offload in switchdev") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In case of traffic going from the VF (so ingress for port representor)
source VSI should be consider during packet classification. It is
needed for hardware to not match packets from different ports with
filters added on other port.
It is only for "from VF" traffic, because other traffic direction
doesn't have source VSI.
Set correct ::src_vsi in rule_info to pass it to the hardware filter.
For example this rule should drop only ipv4 packets from eth10, not from
the others VF PRs. It is needed to check source VSI in this case.
$tc filter add dev eth10 ingress protocol ip flower skip_sw action drop
Fixes: 0d08a441fb1a ("ice: ndo_setup_tc implementation for PF") Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Paolo Bonzini [Tue, 16 Apr 2024 16:50:21 +0000 (12:50 -0400)]
Merge tag 'kvm-x86-fixes-6.9-rcN' of https://github.com/kvm-x86/linux into HEAD
- Fix a mostly benign bug in the gfn_to_pfn_cache infrastructure where KVM
would allow userspace to refresh the cache with a bogus GPA. The bug has
existed for quite some time, but was exposed by a new sanity check added in
6.9 (to ensure a cache is either GPA-based or HVA-based).
- Drop an unused param from gfn_to_pfn_cache_invalidate_start() that got left
behind during a 6.9 cleanup.
- Disable support for virtualizing adaptive PEBS, as KVM's implementation is
architecturally broken and can leak host LBRs to the guest.
- Fix a bug where KVM neglects to set the enable bits for general purpose
counters in PERF_GLOBAL_CTRL when initializing the virtual PMU. Both Intel
and AMD architectures require the bits to be set at RESET in order for v2
PMUs to be backwards compatible with software that was written for v1 PMUs,
i.e. for software that will never manually set the global enables.
- Disable LBR virtualization on CPUs that don't support LBR callstacks, as
KVM unconditionally uses PERF_SAMPLE_BRANCH_CALL_STACK when creating the
virtual LBR perf event, i.e. KVM will always fail to create LBR events on
such CPUs.
- Fix a math goof in x86's hugepage logic for KVM_SET_MEMORY_ATTRIBUTES that
results in an array overflow (detected by KASAN).
- Fix a flaw in the max_guest_memory selftest that results in it exhausting
the supply of ucall structures when run with more than 256 vCPUs.
- Mark KVM_MEM_READONLY as supported for RISC-V in set_memory_region_test.
- Fix a bug where KVM incorrectly thinks a TDP MMU root is an indirect shadow
root due KVM unnecessarily clobbering root_role.direct when userspace sets
guest CPUID.
- Fix a dirty logging bug in the where KVM fails to write-protect TDP MMU
SPTEs used for L2 if Page-Modification Logging is enabled for L1 and the L1
hypervisor is NOT using EPT (if nEPT is enabled, KVM doesn't use the TDP MMU
to run L2). For simplicity, KVM always disables PML when running L2, but
the TDP MMU wasn't accounting for root-specific conditions that force write-
protect based dirty logging.
The series got born as a result of the discussions around the recent
Yanteng' series adding the Loongson LS7A1000, LS2K1000, LS7A2000, LS2K2000
MACs support: Link: https://lore.kernel.org/netdev/fu3f6uoakylnb6eijllakeu5i4okcyqq7sfafhp5efaocbsrwe@w74xe7gb6x7p
In particular the Yanteng' patchset needed to implement the Loongson
MAC-specific constraints applied to the link speed and link duplex mode.
As a result of the discussion with Russel the next preliminary patch was
born: Link: https://lore.kernel.org/netdev/df31e8bcf74b3b4ddb7ddf5a1c371390f16a2ad5.1712917541.git.siyanteng@loongson.cn
The patch above was a temporal solution utilized by Yanteng for further
developments and to move on with the on-going review. This patchset is a
refactored version of that single patch with formatting required for the
fixes patches.
In particular the series starts with fixing the half-duplex-less
constraint currently applied for all IP-cores. In fact it's specific for
the DW QoS Eth only (DW GMAC v4.x/v5.x).
The next patch fixes the MAC-capabilities setting up during the active
Tx/Rx queues re-initialization procedure. Particularly the procedure
missed the max-speed limit thus possibly activating speeds prohibited on
the respective platforms.
Third patch fixes the incorrect MAC-capabilities initialization for DW
MAC100, DW XGMAC and DW XLGMAC devices by moving the correct
initialization to the IP-core specific setup() methods.
That's it for now. Thanks for review and testing in advance.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Simon Horman <horms@kernel.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Samuel Holland <samuel@sholland.org> Cc: netdev@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-sunxi@lists.linux.dev Cc: linux-kernel@vger.kernel.org
====================
As you can see there are only two common capabilities:
MAC_ASYM_PAUSE | MAC_SYM_PAUSE.
Meanwhile what is currently implemented defines 10/100/1000 link speeds
for all IP-cores, which is definitely incorrect for DW MAC100, DW XGMAC
and DW XLGMAC devices.
Seeing the flow-control is implemented as a callback for each MAC IP-core
(see dwmac100_flow_ctrl(), dwmac1000_flow_ctrl(), sun8i_dwmac_flow_ctrl(),
etc) and since the MAC-specific setup() method is supposed to be called
for each available DW MAC-based device, the capabilities initialization
can be freely moved to these setup() functions, thus correctly setting up
the MAC-capabilities for each IP-core (including the Allwinner Sun8i). A
new stmmac_link::caps field was specifically introduced for that so to
have all link-specific info preserved in a single structure.
Note the suggested change fixes three earlier commits at a time. The
commit 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC
supports") permitted the 10-100 link speeds and 1G half-duplex mode for DW
XGMAC IP-core even though it doesn't support them. The commit df7699c70c1b
("net: stmmac: Do not cut down 1G modes") incorrectly added the MAC1000
capability to the DW MAC100 IP-core. Similarly to the DW XGMAC the commit 8a880936e902 ("net: stmmac: Add XLGMII support") incorrectly permitted the
10-100 link speeds and 1G half-duplex mode for DW XLGMAC IP-core.
Fixes: 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC supports") Fixes: df7699c70c1b ("net: stmmac: Do not cut down 1G modes") Fixes: 8a880936e902 ("net: stmmac: Add XLGMII support") Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk> Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Romain Gantois <romain.gantois@bootlin.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: stmmac: Fix max-speed being ignored on queue re-init
It's possible to have the maximum link speed being artificially limited on
the platform-specific basis. It's done either by setting up the
plat_stmmacenet_data::max_speed field or by specifying the "max-speed"
DT-property. In such cases it's required that any specific
MAC-capabilities re-initializations would take the limit into account. In
particular the link speed capabilities may change during the number of
active Tx/Rx queues re-initialization. But the currently implemented
procedure doesn't take the speed limit into account.
Fix that by calling phylink_limit_mac_speed() in the
stmmac_reinit_queues() method if the speed limitation was required in the
same way as it's done in the stmmac_phy_setup() function.
Fixes: 95201f36f395 ("net: stmmac: update MAC capabilities when tx queues are updated") Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Romain Gantois <romain.gantois@bootlin.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: stmmac: Apply half-duplex-less constraint for DW QoS Eth only
There are three DW MAC IP-cores which can have the multiple Tx/Rx queues
enabled:
DW GMAC v3.7+ with AV feature,
DW QoS Eth v4.x/v5.x,
DW XGMAC/XLGMAC
Based on the respective HW databooks, only the DW QoS Eth IP-core doesn't
support the half-duplex link mode in case if more than one queues enabled:
"In multiple queue/channel configurations, for half-duplex operation,
enable only the Q0/CH0 on Tx and Rx. For single queue/channel in
full-duplex operation, any queue/channel can be enabled."
The rest of the IP-cores don't have such constraint. Thus in order to have
the constraint applied for the DW QoS Eth MACs only, let's move the it'
implementation to the respective MAC-capabilities getter and make sure the
getter is called in the queues re-init procedure.
Fixes: b6cfffa7ad92 ("stmmac: fix DMA channel hang in half-duplex mode") Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Romain Gantois <romain.gantois@bootlin.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
platform/x86/intel-uncore-freq: Increase minor number support
No new changes will be added for minor version 2. Change the minor
version number to 2 and stop displaying log message for unsupported
minor version 2.
platform/x86/amd: pmf: Add quirk for ROG Zephyrus G14
ROG Zephyrus G14 advertises support for SPS notifications to the
BIOS but doesn't actually use them. Instead the asus-nb-wmi driver
utilizes such events.
Add a quirk to prevent the system from registering for ACPI platform
profile when this system is found to avoid conflicts.
Reported-by: al0uette@outlook.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218685 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240410140956.385-3-mario.limonciello@amd.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86/amd: pmf: Decrease error message to debug
ASUS ROG Zephyrus G14 doesn't have _CRS in AMDI0102 device and so
there are no resources to walk. This is expected behavior because
it doesn't support Smart PC. Decrease error message to debug.
sched: Add missing memory barrier in switch_mm_cid
Many architectures' switch_mm() (e.g. arm64) do not have an smp_mb()
which the core scheduler code has depended upon since commit:
commit 223baf9d17f25 ("sched: Fix performance regression introduced by mm_cid")
If switch_mm() doesn't call smp_mb(), sched_mm_cid_remote_clear() can
unset the actively used cid when it fails to observe active task after it
sets lazy_put.
There *is* a memory barrier between storing to rq->curr and _return to
userspace_ (as required by membarrier), but the rseq mm_cid has stricter
requirements: the barrier needs to be issued between store to rq->curr
and switch_mm_cid(), which happens earlier than:
- spin_unlock(),
- switch_to().
So it's fine when the architecture switch_mm() happens to have that
barrier already, but less so when the architecture only provides the
full barrier in switch_to() or spin_unlock().
It is a bug in the rseq switch_mm_cid() implementation. All architectures
that don't have memory barriers in switch_mm(), but rather have the full
barrier either in finish_lock_switch() or switch_to() have them too late
for the needs of switch_mm_cid().
Introduce a new smp_mb__after_switch_mm(), defined as smp_mb() in the
generic barrier.h header, and use it in switch_mm_cid() for scheduler
transitions where switch_mm() is expected to provide a memory barrier.
Architectures can override smp_mb__after_switch_mm() if their
switch_mm() implementation provides an implicit memory barrier.
Override it with a no-op on x86 which implicitly provide this memory
barrier by writing to CR3.
Fixes: 223baf9d17f2 ("sched: Fix performance regression introduced by mm_cid") Reported-by: levi.yun <yeoreum.yun@arm.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> # for arm64 Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # for x86 Cc: <stable@vger.kernel.org> # 6.4.x Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20240415152114.59122-2-mathieu.desnoyers@efficios.com
selftests/tcp_ao: Printing fixes to confirm with format-security
On my new laptop with packages from nixos-unstable, gcc 12.3.0 produces
> lib/setup.c: In function ‘__test_msg’:
> lib/setup.c:20:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 20 | ksft_print_msg(buf);
> | ^~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_ok’:
> lib/setup.c:26:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 26 | ksft_test_result_pass(buf);
> | ^~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_fail’:
> lib/setup.c:32:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 32 | ksft_test_result_fail(buf);
> | ^~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_xfail’:
> lib/setup.c:38:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 38 | ksft_test_result_xfail(buf);
> | ^~~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_error’:
> lib/setup.c:44:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 44 | ksft_test_result_error(buf);
> | ^~~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_skip’:
> lib/setup.c:50:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 50 | ksft_test_result_skip(buf);
> | ^~~~~~~~~~~~~~~~~~~~~
> cc1: some warnings being treated as errors
As the buffer was already pre-printed into, print it as a string
rather than a format-string.
Fixes: cfbab37b3da0 ("selftests/net: Add TCP-AO library") Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
selftests/tcp_ao: Fix fscanf() call for format-security
On my new laptop with packages from nixos-unstable, gcc 12.3.0 produces:
> lib/proc.c: In function ‘netstat_read_type’:
> lib/proc.c:89:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 89 | if (fscanf(fnetstat, type->header_name) == EOF)
> | ^~
> cc1: some warnings being treated as errors
Here the selftests lib parses header name, while expectes non-space word
ending with a column.
Fixes: cfbab37b3da0 ("selftests/net: Add TCP-AO library") Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, "active reset" cases are flaky, because select() is called
for 3 sockets, while only 2 are expected to receive RST.
The idea of the third socket was to get into request_sock_queue,
but the test mistakenly attempted to connect() after the listener
socket was shut down.
Repair this test, it's important to check the different kernel
code-paths for signing RST TCP-AO segments.
Fixes: c6df7b2361d7 ("selftests/net: Add TCP-AO RST test") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ubsan: Add awareness of signed integer overflow traps
On arm64, UBSAN traps can be decoded from the trap instruction. Add the
add, sub, and mul overflow trap codes now that CONFIG_UBSAN_SIGNED_WRAP
exists. Seen under clang 19:
Merge tag 'nfsd-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a potential tracepoint crash
- Fix NFSv4 GETATTR on big-endian platforms
* tag 'nfsd-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: fix endianness issue in nfsd4_encode_fattr4
SUNRPC: Fix rpcgss_context trace event acceptor field
I didn't pay close enough attention the last time I tried to fix this
problem - while we currently do correctly take care to make sure we don't
probe a connected eDP port more then once, we don't do the same thing for
eDP ports we found to be disconnected.
So, fix this and make sure we only ever probe eDP ports once and then leave
them at that connector state forever (since without HPD, it's not going to
change on its own anyway). This should get rid of the last few GSP errors
getting spit out during runtime suspend and resume on some machines, as we
tried to reprobe eDP ports in response to ACPI hotplug probe events.
Lyude Paul [Thu, 4 Apr 2024 23:35:53 +0000 (19:35 -0400)]
drm/nouveau/kms/nv50-: Disable AUX bus for disconnected DP ports
GSP has its own state for keeping track of whether or not a given display
connector is plugged in or not, and enforces this state on the driver. In
particular, AUX transactions on a DisplayPort connector which GSP says is
disconnected can never succeed - and can in some cases even cause
unexpected timeouts, which can trickle up to cause other problems. A good
example of this is runtime power management: where we can actually get
stuck trying to resume the GPU if a userspace application like fwupd tries
accessing a drm_aux_dev for a disconnected port. This was an issue I hit a
few times with my Slimbook Executive 16 - where trying to offload something
to the discrete GPU would wake it up, and then potentially cause it to
timeout as fwupd tried to immediately access the dp_aux_dev nodes for
nouveau.
Likewise: we don't really have any cases I know of where we'd want to
ignore this state and try an aux transaction anyway - and failing pointless
aux transactions immediately can even speed things up. So - let's start
enabling/disabling the aux bus in nouveau_dp_detect() to fix this. We
enable the aux bus during connector probing, and leave it enabled if we
discover something is actually on the connector. Otherwise, we just shut it
off.
This should fix some people's runtime PM issues (like myself), and also get
rid of quite of a lot of GSP error spam in dmesg.
kernel/configs/hardening.config turns on UBSAN for the bounds sanitizer,
as that in combination with trapping can stop the exploitation of buffer
overflows within the kernel. At the same time, hardening.config turns
off every other UBSAN sanitizer because trapping means all UBSAN reports
will be fatal and the problems brought up by other sanitizers generally
do not have security implications.
The signed integer overflow sanitizer was recently added back to the
kernel and it is default on with just CONFIG_UBSAN=y, meaning that it
gets enabled when merging hardening.config into another configuration.
While this sanitizer does have security implications like the array
bounds sanitizer, work to clean up enough instances to allow this to run
in production environments is still ramping up, which means regular
users and testers may be broken by these instances with
CONFIG_UBSAN_TRAP=y. Disable CONFIG_UBSAN_SIGNED_WRAP in
hardening.config to avoid this situation.
The initial change that added kernel/configs/hardening.config attempted
to disable all UBSAN sanitizers except for the array bounds one while
turning on UBSAN_TRAP. Unfortunately, it only got the syntax for
CONFIG_UBSAN_SHIFT correct, so configurations that are on by default
with CONFIG_UBSAN=y such as CONFIG_UBSAN_{BOOL,ENUM} do not get disabled
properly.
CONFIG_ARCH_HAS_UBSAN=y
CONFIG_UBSAN=y
CONFIG_UBSAN_TRAP=y
CONFIG_CC_HAS_UBSAN_BOUNDS_STRICT=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS_STRICT=y
# CONFIG_UBSAN_SHIFT is not set
# CONFIG_UBSAN_DIV_ZERO is not set
# CONFIG_UBSAN_UNREACHABLE is not set
CONFIG_UBSAN_SIGNED_WRAP=y
CONFIG_UBSAN_BOOL=y
CONFIG_UBSAN_ENUM=y
# CONFIG_TEST_UBSAN is not set
Add the missing 'is not set' to each configuration that needs it so that
they get disabled as intended.
CONFIG_ARCH_HAS_UBSAN=y
CONFIG_UBSAN=y
CONFIG_UBSAN_TRAP=y
CONFIG_CC_HAS_UBSAN_BOUNDS_STRICT=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS_STRICT=y
# CONFIG_UBSAN_SHIFT is not set
# CONFIG_UBSAN_DIV_ZERO is not set
# CONFIG_UBSAN_UNREACHABLE is not set
CONFIG_UBSAN_SIGNED_WRAP=y
# CONFIG_UBSAN_BOOL is not set
# CONFIG_UBSAN_ENUM is not set
# CONFIG_TEST_UBSAN is not set
Merge tag 'bcachefs-2024-04-15' of https://evilpiepirate.org/git/bcachefs
Pull yet more bcachefs fixes from Kent Overstreet:
"This gets recovery working again for the affected user I've been
working with, and I'm still waiting to hear back on other bug reports
but should fix it for everyone else who's been having issues with
recovery.
- Various recovery fixes:
- fixes for the btree_insert_entry being resized on path
allocation btree_path array recently became dynamically
resizable, and btree_insert_entry along with it; this was being
observed during journal replay, when write buffer btree updates
don't use the write buffer and instead use the normal btree
update path
- multiple fixes for deadlock in recovery when we need to do lots
of btree node merges; excessive merges were clocking up the
whole pipeline
- write buffer path now correctly does btree node merges when
needed
- fix failure to go RW when superblock indicates recovery passes
needed (i.e. to complete an unfinished upgrade)
- Various unsafety fixes - test case contributed by a user who had
two drives out of a six drive array write out a whole bunch of
garbage after power failure
- New (tiny) on disk format feature: since it appears the btree node
scan tool will be a more regular thing (crappy hardware, user
error) - this adds a 64 bit per-device bitmap of regions that have
ever had btree nodes.
- A path->should_be_locked fix, from a larger patch series tightening
up invariants and assertions around btree transaction and path
locking state.
This particular fix prevents us from keeping around btree_paths
that are no longer needed"
* tag 'bcachefs-2024-04-15' of https://evilpiepirate.org/git/bcachefs: (24 commits)
bcachefs: set_btree_iter_dontneed also clears should_be_locked
bcachefs: fix error path of __bch2_read_super()
bcachefs: Check for backpointer bucket_offset >= bucket size
bcachefs: bch_member.btree_allocated_bitmap
bcachefs: sysfs internal/trigger_journal_flush
bcachefs: Fix bch2_btree_node_fill() for !path
bcachefs: add safety checks in bch2_btree_node_fill()
bcachefs: Interior known are required to have known key types
bcachefs: add missing bounds check in __bch2_bkey_val_invalid()
bcachefs: Fix btree node merging on write buffer btrees
bcachefs: Disable merges from interior update path
bcachefs: Run merges at BCH_WATERMARK_btree
bcachefs: Fix missing write refs in fs fio paths
bcachefs: Fix deadlock in journal replay
bcachefs: Go rw if running any explicit recovery passes
bcachefs: Standardize helpers for printing enum strs with bounds checks
bcachefs: don't queue btree nodes for rewrites during scan
bcachefs: fix race in bch2_btree_node_evict()
bcachefs: fix unsafety in bch2_stripe_to_text()
bcachefs: fix unsafety in bch2_extent_ptr_to_text()
...
The commit 509433d8146c ("drm/v3d: Expose the total GPU usage stats on sysfs")
introduced the calculation of global GPU stats. For the regards, it used
the already existing infrastructure provided by commit 09a93cc4f7d1 ("drm/v3d:
Implement show_fdinfo() callback for GPU usage stats"). While adding
global GPU stats calculation ability, the author forgot to delete the
existing one.
Currently, the value of `enabled_ns` is incremented twice by the end of
the job, when it should be added just once. Therefore, delete the
leftovers from commit 509433d8146c ("drm/v3d: Expose the total GPU usage
stats on sysfs").
Fixes: 509433d8146c ("drm/v3d: Expose the total GPU usage stats on sysfs") Reported-by: Tvrtko Ursulin <tursulin@igalia.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240403203517.731876-2-mcanal@igalia.com
Kent Overstreet [Sat, 13 Apr 2024 22:02:15 +0000 (18:02 -0400)]
bcachefs: set_btree_iter_dontneed also clears should_be_locked
This is part of a larger series cleaning up the semantics of
should_be_locked and adding assertions around it; if we don't need an
iterator/path anymore, it clearly doesn't need to be locked.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Merge tag 'linux_kselftest-fixes-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"A fix to kselftest harness to prevent infinite loop triggered in an
assert in FIXTURE_TEARDOWN and a fix to a problem seen in being able
to stop subsystem-enable tests when sched events are being traced"
* tag 'linux_kselftest-fixes-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/harness: Prevent infinite loop due to Assert in FIXTURE_TEARDOWN
selftests/ftrace: Limit length in subsystem-enable tests
arm64/hugetlb: Fix page table walk in huge_pte_alloc()
Currently normal HugeTLB fault ends up crashing the kernel, as p4dp derived
from p4d_offset() is an invalid address when PGTABLE_LEVEL = 5. A p4d level
entry needs to be allocated when not available while walking the page table
during HugeTLB faults. Let's call p4d_alloc() to allocate such entries when
required instead of current p4d_offset().
drm/vmwgfx: Sort primary plane formats by order of preference
The table of primary plane formats wasn't sorted at all, leading to
applications picking our least desirable formats by defaults.
Sort the primary plane formats according to our order of preference.
Nice side-effect of this change is that it makes IGT's kms_atomic
plane-invalid-params pass because the test picks the first format
which for vmwgfx was DRM_FORMAT_XRGB1555 and uses fb's with odd sizes
which make Pixman, which IGT depends on assert due to the fact that our
16bpp formats aren't 32 bit aligned like Pixman requires all formats
to be.
The conditional was supposed to prevent enabling of a crtc state
without a set primary plane. Accidently it also prevented disabling
crtc state with a set primary plane. Neither is correct.
Fix the conditional and just driver-warn when a crtc state has been
enabled without a primary plane which will help debug broken userspace.
Fixes IGT's kms_atomic_interruptible and kms_atomic_transition tests.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Fixes: 06ec41909e31 ("drm/vmwgfx: Add and connect CRTC helper functions") Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.12+ Reviewed-by: Ian Forbes <ian.forbes@broadcom.com> Reviewed-by: Martin Krastev <martin.krastev@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412025511.78553-5-zack.rusin@broadcom.com
vmwgfx never supported prime import of external buffers. Furthermore the
driver exposes two different objects to userspace: vmw_surface's and
gem buffers but prime import/export only worked with vmw_surfaces.
Because gem buffers are used through the dumb_buffer interface this meant
that the driver created buffers couldn't have been prime exported or
imported.
Fix prime import/export. Makes IGT's kms_prime pass.
docs: verify/bisect: stable regressions: first stable, then mainline
Rearrange the instructions so that readers facing a regression within a
stable or longterm series first test its latest release before testing
mainline. This is less scary for some people. It also reduces the chance
that something goes sideways for readers that compile their first
kernel, as mainline can cause slightly more trouble.
docs: verify/bisect: describe how to use a build host
Describe how to build kernels on another system (with and without
cross-compiling), as building locally can be quite painfully on some
slow systems. This is done in an add-on section, as it would make the
step-by-step guide to complicated if this special case would be
described there.
docs: verify/bisect: explain testing reverts, patches and newer code
Rename 'Supplementary tasks' to 'Complementary tasks' while introducing
a section 'Optional tasks: test reverts, patches, or later versions':
the latter is something readers occasionally will have to do after
reporting a bug and thus is best covered here.
docs: verify/bisect: add and fetch stable branches ahead of time
Add and fetch all required stable branches ahead of time. This fixes a
bug, as readers that wanted to bisect a regression within a stable or
longterm series otherwise did not have them available at the right time.
This way also matches the flow somewhat better and avoids some "if you
haven't already added it" phrases that otherwise become necessary in
future changes.
docs: verify/bisect: use git switch, tag kernel, and various fixes
Various small improvements and fixes:
* Use the more modern 'git switch' instead of 'git checkout', which
makes it more obvious what's happening (among others due to the
--discard-changes parameter that is more clear than --force).
* Provide a hint how a mainline version number and one from a stable
series look like.
* When trying to validate the bisection result with a revert, add a
special tag to facilitate the identification.
* Sync version numbers used in various examples for consistency: stick
to 6.0.13, 6.0.15, and 6.1.5.
With 16 channel pwm support, we're registering two instances of pwm_chip
with 8 channels each. We need to update PM functions to use both instances
of pwm_chip during power state transitions.
Introduce struct dwc_pwm_drvdata and use it as driver_data, which will
maintain both instances of pwm_chip along with dwc_pwm_info and allow us
to use them inside suspend/resume handles.
Fixes: ebf2c89eb95e ("pwm: dwc: Add 16 channel support for Intel Elkhart Lake") Signed-off-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240415074051.14681-1-raag.jadav@intel.com Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Christian König [Mon, 15 Apr 2024 13:48:21 +0000 (15:48 +0200)]
drm/ttm: stop pooling cached NUMA pages v2
We only pool write combined and uncached allocations because they
require extra overhead on allocation and release.
If we also pool cached NUMA it not only means some extra unnecessary
overhead, but also that under memory pressure it can happen that
pages from the wrong NUMA node enters the pool and are re-used
over and over again.
This can lead to performance reduction after running into memory
pressure.
v2: restructure and cleanup the code a bit from the internal hack to
test this.
Upon reviewing the flower control flags handling in
this driver, I notice that the key wasn't being used,
only the mask.
Ie. `tc flower ... ip_flags nofrag` was hardware
offloaded as `... ip_flags frag`.
Only compile tested, no access to HW.
Fixes: c672e3727989 ("octeontx2-pf: Add support to filter packet based on IP fragment") Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 11 Apr 2024 18:02:02 +0000 (11:02 -0700)]
inet: bring NLM_DONE out to a separate recv() again
Commit under Fixes optimized the number of recv() calls
needed during RTM_GETROUTE dumps, but we got multiple
reports of applications hanging on recv() calls.
Applications expect that a route dump will be terminated
with a recv() reading an individual NLM_DONE message.
Coalescing NLM_DONE is perfectly legal in netlink,
but even tho reporters fixed the code in respective
projects, chances are it will take time for those
applications to get updated. So revert to old behavior
(for now)?
When Output Resource (dcb->or) value is assigned in
fabricate_dcb_output(), there may be out of bounds access to
dac_users array in case dcb->or is zero because ffs(dcb->or) is
used as index there.
The 'or' argument of fabricate_dcb_output() must be interpreted as a
number of bit to set, not value.
Utilize macros from 'enum nouveau_or' in calls instead of hardcoding.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 2e5702aff395 ("drm/nouveau: fabricate DCB encoder table for iMac G4") Fixes: 670820c0e6a9 ("drm/nouveau: Workaround incorrect DCB entry on a GeForce3 Ti 200.") Signed-off-by: Mikhail Kobuk <m.kobuk@ispras.ru> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240411110854.16701-1-m.kobuk@ispras.ru
Adding any sort of useful debug usually makes it go away, so I hand
wrote the function in a line, and debugged the asm.
Every so often pt->memory->ptrs is NULL. This ptrs ptr is set in
the nv50_instobj_acquire called from nvkm_kmap.
If Thread A and Thread B both get to nv50_instobj_acquire around
the same time, and Thread A hits the refcount_set line, and in
lockstep thread B succeeds at refcount_inc_not_zero, there is a
chance the ptrs value won't have been stored since refcount_set
is unordered. Force a memory barrier here, I picked smp_mb, since
we want it on all CPUs and it's write followed by a read.
Danny Lin [Sun, 14 Apr 2024 00:34:31 +0000 (17:34 -0700)]
fuse: fix leaked ENOSYS error on first statx call
FUSE attempts to detect server support for statx by trying it once and
setting no_statx=1 if it fails with ENOSYS, but consider the following
scenario:
- Userspace (e.g. sh) calls stat() on a file
* succeeds
- Userspace (e.g. lsd) calls statx(BTIME) on the same file
- request_mask = STATX_BASIC_STATS | STATX_BTIME
- first pass: sync=true due to differing cache_mask
- statx fails and returns ENOSYS
- set no_statx and retry
- retry sets mask = STATX_BASIC_STATS
- now mask == cache_mask; sync=false (time_before: still valid)
- so we take the "else if (stat)" path
- "err" is still ENOSYS from the failed statx call
Fix this by zeroing "err" before retrying the failed call.
Fixes: d3045530bdd2 ("fuse: implement statx") Cc: stable@vger.kernel.org # v6.6 Signed-off-by: Danny Lin <danny@orbstack.dev> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Amir Goldstein [Sun, 7 Apr 2024 15:57:56 +0000 (18:57 +0300)]
fuse: fix wrong ff->iomode state changes from parallel dio write
There is a confusion with fuse_file_uncached_io_{start,end} interface.
These helpers do two things when called from passthrough open()/release():
1. Take/drop negative refcount of fi->iocachectr (inode uncached io mode)
2. State change ff->iomode IOM_NONE <-> IOM_UNCACHED (file uncached open)
The calls from parallel dio write path need to take a reference on
fi->iocachectr, but they should not be changing ff->iomode state, because
in this case, the fi->iocachectr reference does not stick around until file
release().
Factor out helpers fuse_inode_uncached_io_{start,end}, to be used from
parallel dio write path and rename fuse_file_*cached_io_{start,end} helpers
to fuse_file_*cached_io_{open,release} to clarify the difference.
Fixes: 205c1d802683 ("fuse: allow parallel dio writes with FUSE_DIRECT_IO_ALLOW_MMAP") Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Update the USB serial option driver support for the Fibocom
FM135-GL LTE modules.
- VID:PID 2cb7:0115, FM135-GL for laptop debug M.2 cards(with MBIM
interface for /Linux/Chrome OS)
Merge tag 'thunderbolt-for-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fixes for v6.9-rc5
This includes following USB4/Thunderbolt fixes for v6.9-rc5:
- Avoid creating DisplayPort tunnels for the adapters on the same router
- Correct wake configurations after device router unplug
- Fix immediate wake when "wakeup_count" is used to enter system sleep.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Avoid notify PM core about runtime PM resume
thunderbolt: Fix wake configurations after device unplug
thunderbolt: Do not create DisplayPort tunnels on adapters of the same router
projects / thirdparty / linux.git / log
