]> git.ipfire.org Git - thirdparty/mdadm.git/blob - Assemble.c
Remove 'fd' arg from sysfs_add_disk
[thirdparty/mdadm.git] / Assemble.c
1 /*
2 * mdadm - manage Linux "md" devices aka RAID arrays.
3 *
4 * Copyright (C) 2001-2006 Neil Brown <neilb@suse.de>
5 *
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 *
21 * Author: Neil Brown
22 * Email: <neilb@cse.unsw.edu.au>
23 * Paper: Neil Brown
24 * School of Computer Science and Engineering
25 * The University of New South Wales
26 * Sydney, 2052
27 * Australia
28 */
29
30 #include "mdadm.h"
31 #include <ctype.h>
32
33 static int name_matches(char *found, char *required, char *homehost)
34 {
35 /* See if the name found matches the required name, possibly
36 * prefixed with 'homehost'
37 */
38 char fnd[33];
39
40 strncpy(fnd, found, 32);
41 fnd[32] = 0;
42 if (strcmp(found, required)==0)
43 return 1;
44 if (homehost) {
45 int l = strlen(homehost);
46 if (l < 32 && fnd[l] == ':' &&
47 strcmp(fnd+l+1, required)==0)
48 return 1;
49 }
50 return 0;
51 }
52
53 int Assemble(struct supertype *st, char *mddev, int mdfd,
54 mddev_ident_t ident,
55 mddev_dev_t devlist, char *backup_file,
56 int readonly, int runstop,
57 char *update, char *homehost,
58 int verbose, int force)
59 {
60 /*
61 * The task of Assemble is to find a collection of
62 * devices that should (according to their superblocks)
63 * form an array, and to give this collection to the MD driver.
64 * In Linux-2.4 and later, this involves submitting a
65 * SET_ARRAY_INFO ioctl with no arg - to prepare
66 * the array - and then submit a number of
67 * ADD_NEW_DISK ioctls to add disks into
68 * the array. Finally RUN_ARRAY might
69 * be submitted to start the array.
70 *
71 * Much of the work of Assemble is in finding and/or
72 * checking the disks to make sure they look right.
73 *
74 * If mddev is not set, then scan must be set and we
75 * read through the config file for dev+uuid mapping
76 * We recurse, setting mddev, for each device that
77 * - isn't running
78 * - has a valid uuid (or any uuid if !uuidset)
79 *
80 * If mddev is set, we try to determine state of md.
81 * check version - must be at least 0.90.0
82 * check kernel version. must be at least 2.4.
83 * If not, we can possibly fall back on START_ARRAY
84 * Try to GET_ARRAY_INFO.
85 * If possible, give up
86 * If not, try to STOP_ARRAY just to make sure
87 *
88 * If !uuidset and scan, look in conf-file for uuid
89 * If not found, give up
90 * If !devlist and scan and uuidset, get list of devs from conf-file
91 *
92 * For each device:
93 * Check superblock - discard if bad
94 * Check uuid (set if we don't have one) - discard if no match
95 * Check superblock similarity if we have a superblock - discard if different
96 * Record events, devicenum
97 * This should give us a list of devices for the array
98 * We should collect the most recent event number
99 *
100 * Count disks with recent enough event count
101 * While force && !enough disks
102 * Choose newest rejected disks, update event count
103 * mark clean and rewrite superblock
104 * If recent kernel:
105 * SET_ARRAY_INFO
106 * foreach device with recent events : ADD_NEW_DISK
107 * if runstop == 1 || "enough" disks and runstop==0 -> RUN_ARRAY
108 * If old kernel:
109 * Check the device numbers in superblock are right
110 * update superblock if any changes
111 * START_ARRAY
112 *
113 */
114 int clean = 0;
115 int must_close = 0;
116 int old_linux = 0;
117 int vers = 0; /* Keep gcc quite - it really is initialised */
118 struct {
119 char *devname;
120 int uptodate; /* set once we decide that this device is as
121 * recent as everything else in the array.
122 */
123 struct mdinfo i;
124 } *devices;
125 int *best = NULL; /* indexed by raid_disk */
126 unsigned int bestcnt = 0;
127 int devcnt = 0;
128 unsigned int okcnt, sparecnt;
129 unsigned int req_cnt;
130 unsigned int i;
131 int most_recent = 0;
132 int chosen_drive;
133 int change = 0;
134 int inargv = 0;
135 int bitmap_done;
136 int start_partial_ok = (runstop >= 0) && (force || devlist==NULL || mdfd < 0);
137 unsigned int num_devs;
138 mddev_dev_t tmpdev;
139 struct mdinfo info;
140 char *avail;
141 int nextspare = 0;
142
143 if (get_linux_version() < 2004000)
144 old_linux = 1;
145
146 if (mdfd >= 0) {
147 vers = md_get_version(mdfd);
148 if (vers <= 0) {
149 fprintf(stderr, Name ": %s appears not to be an md device.\n", mddev);
150 return 1;
151 }
152 if (vers < 9000) {
153 fprintf(stderr, Name ": Assemble requires driver version 0.90.0 or later.\n"
154 " Upgrade your kernel or try --build\n");
155 return 1;
156 }
157
158 if (ioctl(mdfd, GET_ARRAY_INFO, &info.array)>=0) {
159 fprintf(stderr, Name ": device %s already active - cannot assemble it\n",
160 mddev);
161 return 1;
162 }
163 ioctl(mdfd, STOP_ARRAY, NULL); /* just incase it was started but has no content */
164 }
165 /*
166 * If any subdevs are listed, then any that don't
167 * match ident are discarded. Remainder must all match and
168 * become the array.
169 * If no subdevs, then we scan all devices in the config file, but
170 * there must be something in the identity
171 */
172
173 if (!devlist &&
174 ident->uuid_set == 0 &&
175 ident->super_minor < 0 &&
176 ident->devices == NULL) {
177 fprintf(stderr, Name ": No identity information available for %s - cannot assemble.\n",
178 mddev ? mddev : "further assembly");
179 return 1;
180 }
181 if (devlist == NULL)
182 devlist = conf_get_devs();
183 else if (mdfd >= 0)
184 inargv = 1;
185
186 try_again:
187
188 tmpdev = devlist; num_devs = 0;
189 while (tmpdev) {
190 if (tmpdev->used)
191 tmpdev->used = 2;
192 else
193 num_devs++;
194 tmpdev = tmpdev->next;
195 }
196 devices = malloc(num_devs * sizeof(*devices));
197
198 if (!st && ident->st) st = ident->st;
199
200 if (verbose>0)
201 fprintf(stderr, Name ": looking for devices for %s\n",
202 mddev ? mddev : "further assembly");
203
204 /* first walk the list of devices to find a consistent set
205 * that match the criterea, if that is possible.
206 * We flag the one we like with 'used'.
207 */
208 for (tmpdev = devlist;
209 tmpdev;
210 tmpdev = tmpdev->next) {
211 char *devname = tmpdev->devname;
212 int dfd;
213 struct stat stb;
214 struct supertype *tst = dup_super(st);
215
216 if (tmpdev->used > 1) continue;
217
218 if (ident->devices &&
219 !match_oneof(ident->devices, devname)) {
220 if ((inargv && verbose>=0) || verbose > 0)
221 fprintf(stderr, Name ": %s is not one of %s\n", devname, ident->devices);
222 continue;
223 }
224
225 dfd = dev_open(devname, O_RDONLY|O_EXCL);
226 if (dfd < 0) {
227 if ((inargv && verbose >= 0) || verbose > 0)
228 fprintf(stderr, Name ": cannot open device %s: %s\n",
229 devname, strerror(errno));
230 tmpdev->used = 2;
231 } else if (fstat(dfd, &stb)< 0) {
232 /* Impossible! */
233 fprintf(stderr, Name ": fstat failed for %s: %s\n",
234 devname, strerror(errno));
235 tmpdev->used = 2;
236 } else if ((stb.st_mode & S_IFMT) != S_IFBLK) {
237 fprintf(stderr, Name ": %s is not a block device.\n",
238 devname);
239 tmpdev->used = 2;
240 } else if (!tst && (tst = guess_super(dfd)) == NULL) {
241 if ((inargv && verbose >= 0) || verbose > 0)
242 fprintf(stderr, Name ": no recogniseable superblock on %s\n",
243 devname);
244 tmpdev->used = 2;
245 } else if (tst->ss->load_super(tst,dfd, NULL)) {
246 if ((inargv && verbose >= 0) || verbose > 0)
247 fprintf( stderr, Name ": no RAID superblock on %s\n",
248 devname);
249 } else {
250 tst->ss->getinfo_super(tst, &info);
251 }
252 if (dfd >= 0) close(dfd);
253
254 if (ident->uuid_set && (!update || strcmp(update, "uuid")!= 0) &&
255 (!tst || !tst->sb ||
256 same_uuid(info.uuid, ident->uuid, tst->ss->swapuuid)==0)) {
257 if ((inargv && verbose >= 0) || verbose > 0)
258 fprintf(stderr, Name ": %s has wrong uuid.\n",
259 devname);
260 goto loop;
261 }
262 if (ident->name[0] && (!update || strcmp(update, "name")!= 0) &&
263 (!tst || !tst->sb ||
264 name_matches(info.name, ident->name, homehost)==0)) {
265 if ((inargv && verbose >= 0) || verbose > 0)
266 fprintf(stderr, Name ": %s has wrong name.\n",
267 devname);
268 goto loop;
269 }
270 if (ident->super_minor != UnSet &&
271 (!tst || !tst->sb ||
272 ident->super_minor != info.array.md_minor)) {
273 if ((inargv && verbose >= 0) || verbose > 0)
274 fprintf(stderr, Name ": %s has wrong super-minor.\n",
275 devname);
276 goto loop;
277 }
278 if (ident->level != UnSet &&
279 (!tst || !tst->sb ||
280 ident->level != info.array.level)) {
281 if ((inargv && verbose >= 0) || verbose > 0)
282 fprintf(stderr, Name ": %s has wrong raid level.\n",
283 devname);
284 goto loop;
285 }
286 if (ident->raid_disks != UnSet &&
287 (!tst || !tst->sb ||
288 ident->raid_disks!= info.array.raid_disks)) {
289 if ((inargv && verbose >= 0) || verbose > 0)
290 fprintf(stderr, Name ": %s requires wrong number of drives.\n",
291 devname);
292 goto loop;
293 }
294 if (mdfd < 0) {
295 if (tst == NULL || tst->sb == NULL)
296 continue;
297 if (update == NULL &&
298 tst->ss->match_home(tst, homehost)==0) {
299 if ((inargv && verbose >= 0) || verbose > 0)
300 fprintf(stderr, Name ": %s is not built for host %s.\n",
301 devname, homehost);
302 /* Auto-assemble, and this is not a usable host */
303 /* if update != NULL, we are updating the host
304 * name... */
305 goto loop;
306 }
307 }
308 /* If we are this far, then we are nearly commited to this device.
309 * If the super_block doesn't exist, or doesn't match others,
310 * then we probably cannot continue
311 * However if one of the arrays is for the homehost, and
312 * the other isn't that can disambiguate.
313 */
314
315 if (!tst || !tst->sb) {
316 fprintf(stderr, Name ": %s has no superblock - assembly aborted\n",
317 devname);
318 if (st)
319 st->ss->free_super(st);
320 return 1;
321 }
322
323 if (st == NULL)
324 st = dup_super(tst);
325 if (st->minor_version == -1)
326 st->minor_version = tst->minor_version;
327 if (st->ss != tst->ss ||
328 st->minor_version != tst->minor_version ||
329 st->ss->compare_super(st, tst) != 0) {
330 /* Some mismatch. If exactly one array matches this host,
331 * we can resolve on that one.
332 * Or, if we are auto assembling, we just ignore the second
333 * for now.
334 */
335 if (mdfd < 0)
336 goto loop;
337 if (homehost) {
338 int first = st->ss->match_home(st, homehost);
339 int last = tst->ss->match_home(tst, homehost);
340 if (first+last == 1) {
341 /* We can do something */
342 if (first) {/* just ignore this one */
343 if ((inargv && verbose >= 0) || verbose > 0)
344 fprintf(stderr, Name ": %s misses out due to wrong homehost\n",
345 devname);
346 goto loop;
347 } else { /* reject all those sofar */
348 mddev_dev_t td;
349 if ((inargv && verbose >= 0) || verbose > 0)
350 fprintf(stderr, Name ": %s overrides previous devices due to good homehost\n",
351 devname);
352 for (td=devlist; td != tmpdev; td=td->next)
353 if (td->used == 1)
354 td->used = 0;
355 tmpdev->used = 1;
356 goto loop;
357 }
358 }
359 }
360 fprintf(stderr, Name ": superblock on %s doesn't match others - assembly aborted\n",
361 devname);
362 tst->ss->free_super(tst);
363 st->ss->free_super(st);
364 return 1;
365 }
366
367 tmpdev->used = 1;
368
369 loop:
370 tst->ss->free_super(tst);
371 }
372
373 if (mdfd < 0) {
374 /* So... it is up to me to open the device.
375 * We create a name '/dev/md/XXX' based on the info in the
376 * superblock, and call open_mddev on that
377 */
378 mdu_array_info_t inf;
379 char *c;
380 if (!st->sb) {
381 return 2;
382 }
383 st->ss->getinfo_super(st, &info);
384 c = strchr(info.name, ':');
385 if (c) c++; else c= info.name;
386 if (isdigit(*c) && ((ident->autof & 7)==4 || (ident->autof&7)==6))
387 /* /dev/md/d0 style for partitionable */
388 asprintf(&mddev, "/dev/md/d%s", c);
389 else
390 asprintf(&mddev, "/dev/md/%s", c);
391 mdfd = open_mddev(mddev, ident->autof);
392 if (mdfd < 0) {
393 st->ss->free_super(st);
394 free(devices);
395 goto try_again;
396 }
397 vers = md_get_version(mdfd);
398 if (ioctl(mdfd, GET_ARRAY_INFO, &inf)==0) {
399 for (tmpdev = devlist ;
400 tmpdev && tmpdev->used != 1;
401 tmpdev = tmpdev->next)
402 ;
403 fprintf(stderr, Name ": %s already active, cannot restart it!\n", mddev);
404 if (tmpdev)
405 fprintf(stderr, Name ": %s needed for %s...\n",
406 mddev, tmpdev->devname);
407 close(mdfd);
408 mdfd = -1;
409 st->ss->free_super(st);
410 free(devices);
411 goto try_again;
412 }
413 must_close = 1;
414 }
415
416 /* Ok, no bad inconsistancy, we can try updating etc */
417 bitmap_done = 0;
418 for (tmpdev = devlist; tmpdev; tmpdev=tmpdev->next) if (tmpdev->used == 1) {
419 char *devname = tmpdev->devname;
420 struct stat stb;
421 /* looks like a good enough match to update the super block if needed */
422 #ifndef MDASSEMBLE
423 if (update) {
424 int dfd;
425 /* prepare useful information in info structures */
426 struct stat stb2;
427 struct supertype *tst;
428 fstat(mdfd, &stb2);
429
430 if (strcmp(update, "uuid")==0 &&
431 !ident->uuid_set) {
432 int rfd;
433 if ((rfd = open("/dev/urandom", O_RDONLY)) < 0 ||
434 read(rfd, ident->uuid, 16) != 16) {
435 *(__u32*)(ident->uuid) = random();
436 *(__u32*)(ident->uuid+1) = random();
437 *(__u32*)(ident->uuid+2) = random();
438 *(__u32*)(ident->uuid+3) = random();
439 }
440 if (rfd >= 0) close(rfd);
441 }
442 dfd = dev_open(devname, O_RDWR|O_EXCL);
443
444 remove_partitions(dfd);
445
446 tst = dup_super(st);
447 tst->ss->load_super(tst, dfd, NULL);
448 tst->ss->getinfo_super(tst, &info);
449
450 memcpy(info.uuid, ident->uuid, 16);
451 strcpy(info.name, ident->name);
452 info.array.md_minor = minor(stb2.st_rdev);
453
454 tst->ss->update_super(tst, &info, update,
455 devname, verbose,
456 ident->uuid_set, homehost);
457 if (strcmp(update, "uuid")==0 &&
458 !ident->uuid_set) {
459 ident->uuid_set = 1;
460 memcpy(ident->uuid, info.uuid, 16);
461 }
462 if (dfd < 0)
463 fprintf(stderr, Name ": Cannot open %s for superblock update\n",
464 devname);
465 else if (tst->ss->store_super(tst, dfd))
466 fprintf(stderr, Name ": Could not re-write superblock on %s.\n",
467 devname);
468 if (dfd >= 0)
469 close(dfd);
470
471 if (strcmp(update, "uuid")==0 &&
472 ident->bitmap_fd >= 0 && !bitmap_done) {
473 if (bitmap_update_uuid(ident->bitmap_fd,
474 info.uuid,
475 tst->ss->swapuuid) != 0)
476 fprintf(stderr, Name ": Could not update uuid on external bitmap.\n");
477 else
478 bitmap_done = 1;
479 }
480 tst->ss->free_super(tst);
481 } else
482 #endif
483 {
484 struct supertype *tst = dup_super(st);
485 int dfd;
486 dfd = dev_open(devname, O_RDWR|O_EXCL);
487
488 remove_partitions(dfd);
489
490 tst->ss->load_super(tst, dfd, NULL);
491 tst->ss->getinfo_super(tst, &info);
492 tst->ss->free_super(tst);
493 close(dfd);
494 }
495
496 stat(devname, &stb);
497
498 if (verbose > 0)
499 fprintf(stderr, Name ": %s is identified as a member of %s, slot %d.\n",
500 devname, mddev, info.disk.raid_disk);
501 devices[devcnt].devname = devname;
502 devices[devcnt].uptodate = 0;
503 devices[devcnt].i = info;
504 devices[devcnt].i.disk.major = major(stb.st_rdev);
505 devices[devcnt].i.disk.minor = minor(stb.st_rdev);
506 if (most_recent < devcnt) {
507 if (devices[devcnt].i.events
508 > devices[most_recent].i.events)
509 most_recent = devcnt;
510 }
511 if (info.array.level == -4)
512 /* with multipath, the raid_disk from the superblock is meaningless */
513 i = devcnt;
514 else
515 i = devices[devcnt].i.disk.raid_disk;
516 if (i+1 == 0) {
517 if (nextspare < info.array.raid_disks)
518 nextspare = info.array.raid_disks;
519 i = nextspare++;
520 } else {
521 if (i >= info.array.raid_disks &&
522 i >= nextspare)
523 nextspare = i+1;
524 }
525 if (i < 10000) {
526 if (i >= bestcnt) {
527 unsigned int newbestcnt = i+10;
528 int *newbest = malloc(sizeof(int)*newbestcnt);
529 unsigned int c;
530 for (c=0; c < newbestcnt; c++)
531 if (c < bestcnt)
532 newbest[c] = best[c];
533 else
534 newbest[c] = -1;
535 if (best)free(best);
536 best = newbest;
537 bestcnt = newbestcnt;
538 }
539 if (best[i] >=0 &&
540 devices[best[i]].i.events
541 == devices[devcnt].i.events
542 && (devices[best[i]].i.disk.minor
543 != devices[devcnt].i.disk.minor)
544 && st->ss->major == 0
545 && info.array.level != -4) {
546 /* two different devices with identical superblock.
547 * Could be a mis-detection caused by overlapping
548 * partitions. fail-safe.
549 */
550 fprintf(stderr, Name ": WARNING %s and %s appear"
551 " to have very similar superblocks.\n"
552 " If they are really different, "
553 "please --zero the superblock on one\n"
554 " If they are the same or overlap,"
555 " please remove one from %s.\n",
556 devices[best[i]].devname, devname,
557 inargv ? "the list" :
558 "the\n DEVICE list in mdadm.conf"
559 );
560 if (must_close) close(mdfd);
561 return 1;
562 }
563 if (best[i] == -1
564 || (devices[best[i]].i.events
565 < devices[devcnt].i.events))
566 best[i] = devcnt;
567 }
568 devcnt++;
569 }
570
571 if (update && strcmp(update, "byteorder")==0)
572 st->minor_version = 90;
573
574 if (devcnt == 0) {
575 fprintf(stderr, Name ": no devices found for %s\n",
576 mddev);
577 st->ss->free_super(st);
578 if (must_close) close(mdfd);
579 return 1;
580 }
581
582 st->ss->getinfo_super(st, &info);
583 clean = info.array.state & 1;
584
585 /* now we have some devices that might be suitable.
586 * I wonder how many
587 */
588 avail = malloc(info.array.raid_disks);
589 memset(avail, 0, info.array.raid_disks);
590 okcnt = 0;
591 sparecnt=0;
592 for (i=0; i< bestcnt ;i++) {
593 int j = best[i];
594 int event_margin = 1; /* always allow a difference of '1'
595 * like the kernel does
596 */
597 if (j < 0) continue;
598 /* note: we ignore error flags in multipath arrays
599 * as they don't make sense
600 */
601 if (info.array.level != -4)
602 if (!(devices[j].i.disk.state & (1<<MD_DISK_SYNC))) {
603 if (!(devices[j].i.disk.state
604 & (1<<MD_DISK_FAULTY)))
605 sparecnt++;
606 continue;
607 }
608 if (devices[j].i.events+event_margin >=
609 devices[most_recent].i.events) {
610 devices[j].uptodate = 1;
611 if (i < info.array.raid_disks) {
612 okcnt++;
613 avail[i]=1;
614 } else
615 sparecnt++;
616 }
617 }
618 while (force && !enough(info.array.level, info.array.raid_disks,
619 info.array.layout, 1,
620 avail, okcnt)) {
621 /* Choose the newest best drive which is
622 * not up-to-date, update the superblock
623 * and add it.
624 */
625 int fd;
626 struct supertype *tst;
627 long long current_events;
628 chosen_drive = -1;
629 for (i=0; i<info.array.raid_disks && i < bestcnt; i++) {
630 int j = best[i];
631 if (j>=0 &&
632 !devices[j].uptodate &&
633 devices[j].i.events > 0 &&
634 (chosen_drive < 0 ||
635 devices[j].i.events
636 > devices[chosen_drive].i.events))
637 chosen_drive = j;
638 }
639 if (chosen_drive < 0)
640 break;
641 current_events = devices[chosen_drive].i.events;
642 add_another:
643 if (verbose >= 0)
644 fprintf(stderr, Name ": forcing event count in %s(%d) from %d upto %d\n",
645 devices[chosen_drive].devname,
646 devices[chosen_drive].i.disk.raid_disk,
647 (int)(devices[chosen_drive].i.events),
648 (int)(devices[most_recent].i.events));
649 fd = dev_open(devices[chosen_drive].devname, O_RDWR|O_EXCL);
650 if (fd < 0) {
651 fprintf(stderr, Name ": Couldn't open %s for write - not updating\n",
652 devices[chosen_drive].devname);
653 devices[chosen_drive].i.events = 0;
654 continue;
655 }
656 tst = dup_super(st);
657 if (tst->ss->load_super(st,fd, NULL)) {
658 close(fd);
659 fprintf(stderr, Name ": RAID superblock disappeared from %s - not updating.\n",
660 devices[chosen_drive].devname);
661 devices[chosen_drive].i.events = 0;
662 continue;
663 }
664 info.events = devices[most_recent].i.events;
665 tst->ss->update_super(tst, &info, "force-one",
666 devices[chosen_drive].devname, verbose,
667 0, NULL);
668
669 if (tst->ss->store_super(tst, fd)) {
670 close(fd);
671 fprintf(stderr, Name ": Could not re-write superblock on %s\n",
672 devices[chosen_drive].devname);
673 devices[chosen_drive].i.events = 0;
674 tst->ss->free_super(tst);
675 continue;
676 }
677 close(fd);
678 devices[chosen_drive].i.events = devices[most_recent].i.events;
679 devices[chosen_drive].uptodate = 1;
680 avail[chosen_drive] = 1;
681 okcnt++;
682 tst->ss->free_super(tst);
683
684 /* If there are any other drives of the same vintage,
685 * add them in as well. We can't lose and we might gain
686 */
687 for (i=0; i<info.array.raid_disks && i < bestcnt ; i++) {
688 int j = best[i];
689 if (j >= 0 &&
690 !devices[j].uptodate &&
691 devices[j].i.events > 0 &&
692 devices[j].i.events == current_events) {
693 chosen_drive = j;
694 goto add_another;
695 }
696 }
697 }
698
699 /* Now we want to look at the superblock which the kernel will base things on
700 * and compare the devices that we think are working with the devices that the
701 * superblock thinks are working.
702 * If there are differences and --force is given, then update this chosen
703 * superblock.
704 */
705 chosen_drive = -1;
706 st->ss->free_super(st);
707 for (i=0; chosen_drive < 0 && i<bestcnt; i++) {
708 int j = best[i];
709 int fd;
710
711 if (j<0)
712 continue;
713 if (!devices[j].uptodate)
714 continue;
715 chosen_drive = j;
716 if ((fd=dev_open(devices[j].devname, O_RDONLY|O_EXCL))< 0) {
717 fprintf(stderr, Name ": Cannot open %s: %s\n",
718 devices[j].devname, strerror(errno));
719 if (must_close) close(mdfd);
720 return 1;
721 }
722 if (st->ss->load_super(st,fd, NULL)) {
723 close(fd);
724 fprintf(stderr, Name ": RAID superblock has disappeared from %s\n",
725 devices[j].devname);
726 if (must_close) close(mdfd);
727 return 1;
728 }
729 close(fd);
730 }
731 if (st->sb == NULL) {
732 fprintf(stderr, Name ": No suitable drives found for %s\n", mddev);
733 if (must_close) close(mdfd);
734 return 1;
735 }
736 st->ss->getinfo_super(st, &info);
737 for (i=0; i<bestcnt; i++) {
738 int j = best[i];
739 unsigned int desired_state;
740
741 if (i < info.array.raid_disks)
742 desired_state = (1<<MD_DISK_ACTIVE) | (1<<MD_DISK_SYNC);
743 else
744 desired_state = 0;
745
746 if (j<0)
747 continue;
748 if (!devices[j].uptodate)
749 continue;
750
751 devices[j].i.disk.state = desired_state;
752
753 if (st->ss->update_super(st, &devices[j].i, "assemble", NULL,
754 verbose, 0, NULL)) {
755 if (force) {
756 if (verbose >= 0)
757 fprintf(stderr, Name ": "
758 "clearing FAULTY flag for device %d in %s for %s\n",
759 j, mddev, devices[j].devname);
760 change = 1;
761 } else {
762 if (verbose >= -1)
763 fprintf(stderr, Name ": "
764 "device %d in %s has wrong state in superblock, but %s seems ok\n",
765 i, mddev, devices[j].devname);
766 }
767 }
768 #if 0
769 if (!(super.disks[i].i.disk.state & (1 << MD_DISK_FAULTY))) {
770 fprintf(stderr, Name ": devices %d of %s is not marked FAULTY in superblock, but cannot be found\n",
771 i, mddev);
772 }
773 #endif
774 }
775 if (force && !clean &&
776 !enough(info.array.level, info.array.raid_disks,
777 info.array.layout, clean,
778 avail, okcnt)) {
779 change += st->ss->update_super(st, &info, "force-array",
780 devices[chosen_drive].devname, verbose,
781 0, NULL);
782 clean = 1;
783 }
784
785 if (change) {
786 int fd;
787 fd = dev_open(devices[chosen_drive].devname, O_RDWR|O_EXCL);
788 if (fd < 0) {
789 fprintf(stderr, Name ": Could not open %s for write - cannot Assemble array.\n",
790 devices[chosen_drive].devname);
791 if (must_close) close(mdfd);
792 return 1;
793 }
794 if (st->ss->store_super(st, fd)) {
795 close(fd);
796 fprintf(stderr, Name ": Could not re-write superblock on %s\n",
797 devices[chosen_drive].devname);
798 if (must_close) close(mdfd);
799 return 1;
800 }
801 close(fd);
802 }
803
804 /* If we are in the middle of a reshape we may need to restore saved data
805 * that was moved aside due to the reshape overwriting live data
806 * The code of doing this lives in Grow.c
807 */
808 #ifndef MDASSEMBLE
809 if (info.reshape_active) {
810 int err = 0;
811 int *fdlist = malloc(sizeof(int)* bestcnt);
812 for (i=0; i<bestcnt; i++) {
813 int j = best[i];
814 if (j >= 0) {
815 fdlist[i] = dev_open(devices[j].devname, O_RDWR|O_EXCL);
816 if (fdlist[i] < 0) {
817 fprintf(stderr, Name ": Could not open %s for write - cannot Assemble array.\n",
818 devices[j].devname);
819 err = 1;
820 break;
821 }
822 } else
823 fdlist[i] = -1;
824 }
825 if (!err)
826 err = Grow_restart(st, &info, fdlist, bestcnt, backup_file);
827 while (i>0) {
828 i--;
829 if (fdlist[i]>=0) close(fdlist[i]);
830 }
831 if (err) {
832 fprintf(stderr, Name ": Failed to restore critical section for reshape, sorry.\n");
833 if (must_close) close(mdfd);
834 return err;
835 }
836 }
837 #endif
838 /* count number of in-sync devices according to the superblock.
839 * We must have this number to start the array without -s or -R
840 */
841 req_cnt = info.array.working_disks;
842
843 /* Almost ready to actually *do* something */
844 if (!old_linux) {
845 int rv;
846
847 #ifndef MDASSEMBLE
848 struct mdinfo *sra;
849 if (st->ss->external) {
850 char ver[100];
851 strcat(strcpy(ver, "external:"), st->ss->text_version);
852 sra = sysfs_read(mdfd, 0, 0);
853 if ((vers % 100) < 2 ||
854 sra == NULL ||
855 sysfs_set_str(sra, NULL, "metadata_version",
856 ver) < 0) {
857 fprintf(stderr, Name ": This kernel does not "
858 "support external metadata.\n");
859 return 1;
860 }
861 rv = sysfs_set_array(sra, &info);
862 } else
863 #endif
864 if ((vers % 100) >= 1) { /* can use different versions */
865 mdu_array_info_t inf;
866 memset(&inf, 0, sizeof(inf));
867 inf.major_version = st->ss->major;
868 inf.minor_version = st->minor_version;
869 rv = ioctl(mdfd, SET_ARRAY_INFO, &inf);
870 } else
871 rv = ioctl(mdfd, SET_ARRAY_INFO, NULL);
872
873 if (rv) {
874 fprintf(stderr, Name ": SET_ARRAY_INFO failed for %s: %s\n",
875 mddev, strerror(errno));
876 if (must_close) close(mdfd);
877 return 1;
878 }
879 if (ident->bitmap_fd >= 0) {
880 if (ioctl(mdfd, SET_BITMAP_FILE, ident->bitmap_fd) != 0) {
881 fprintf(stderr, Name ": SET_BITMAP_FILE failed.\n");
882 if (must_close) close(mdfd);
883 return 1;
884 }
885 } else if (ident->bitmap_file) {
886 /* From config file */
887 int bmfd = open(ident->bitmap_file, O_RDWR);
888 if (bmfd < 0) {
889 fprintf(stderr, Name ": Could not open bitmap file %s\n",
890 ident->bitmap_file);
891 if (must_close) close(mdfd);
892 return 1;
893 }
894 if (ioctl(mdfd, SET_BITMAP_FILE, bmfd) != 0) {
895 fprintf(stderr, Name ": Failed to set bitmapfile for %s\n", mddev);
896 close(bmfd);
897 if (must_close) close(mdfd);
898 return 1;
899 }
900 close(bmfd);
901 }
902
903 /* First, add the raid disks, but add the chosen one last */
904 for (i=0; i<= bestcnt; i++) {
905 int j;
906 if (i < bestcnt) {
907 j = best[i];
908 if (j == chosen_drive)
909 continue;
910 } else
911 j = chosen_drive;
912
913 if (j >= 0 /* && devices[j].uptodate */) {
914 #ifndef MDASSEMBLE
915 if (st->ss->external) {
916 devices[j].i.disk.number =
917 devices[j].i.disk.raid_disk;
918 st->ss->getinfo_super_n(st,
919 &devices[j].i);
920 rv = sysfs_add_disk(sra,
921 &devices[j].i);
922 } else
923 #endif
924 rv = ioctl(mdfd, ADD_NEW_DISK,
925 &devices[j].i.disk);
926 if (rv) {
927 fprintf(stderr, Name ": failed to add "
928 "%s to %s: %s\n",
929 devices[j].devname,
930 mddev,
931 strerror(errno));
932 if (i < info.array.raid_disks
933 || i == bestcnt)
934 okcnt--;
935 else
936 sparecnt--;
937 } else if (verbose > 0)
938 fprintf(stderr, Name ": added %s "
939 "to %s as %d\n",
940 devices[j].devname, mddev,
941 devices[j].i.disk.raid_disk);
942 } else if (verbose > 0 && i < info.array.raid_disks)
943 fprintf(stderr, Name ": no uptodate device for "
944 "slot %d of %s\n",
945 i, mddev);
946 }
947
948 if (info.array.level == LEVEL_CONTAINER) {
949 if (verbose >= 0) {
950 fprintf(stderr, Name ": Container %s has been "
951 "assembled with %d drive%s",
952 mddev, okcnt, okcnt==1?"":"s");
953 if (okcnt < info.array.raid_disks)
954 fprintf(stderr, " (out of %d)",
955 info.array.raid_disks);
956 fprintf(stderr, "\n");
957 }
958 if (must_close)
959 close(mdfd);
960 return 0;
961 }
962
963 if (runstop == 1 ||
964 (runstop <= 0 &&
965 ( enough(info.array.level, info.array.raid_disks,
966 info.array.layout, clean, avail, okcnt) &&
967 (okcnt >= req_cnt || start_partial_ok)
968 ))) {
969 if (ioctl(mdfd, RUN_ARRAY, NULL)==0) {
970 if (verbose >= 0) {
971 fprintf(stderr, Name ": %s has been started with %d drive%s",
972 mddev, okcnt, okcnt==1?"":"s");
973 if (okcnt < info.array.raid_disks)
974 fprintf(stderr, " (out of %d)", info.array.raid_disks);
975 if (sparecnt)
976 fprintf(stderr, " and %d spare%s", sparecnt, sparecnt==1?"":"s");
977 fprintf(stderr, ".\n");
978 }
979 if (must_close) {
980 int usecs = 1;
981 close(mdfd);
982 /* There is a nasty race with 'mdadm --monitor'.
983 * If it opens this device before we close it,
984 * it gets an incomplete open on which IO
985 * doesn't work and the capacity is
986 * wrong.
987 * If we reopen (to check for layered devices)
988 * before --monitor closes, we loose.
989 *
990 * So: wait upto 1 second for there to be
991 * a non-zero capacity.
992 */
993 while (usecs < 1000) {
994 mdfd = open(mddev, O_RDONLY);
995 if (mdfd >= 0) {
996 unsigned long long size;
997 if (get_dev_size(mdfd, NULL, &size) &&
998 size > 0)
999 break;
1000 close(mdfd);
1001 }
1002 usleep(usecs);
1003 usecs <<= 1;
1004 }
1005 }
1006 return 0;
1007 }
1008 fprintf(stderr, Name ": failed to RUN_ARRAY %s: %s\n",
1009 mddev, strerror(errno));
1010
1011 if (!enough(info.array.level, info.array.raid_disks,
1012 info.array.layout, 1, avail, okcnt))
1013 fprintf(stderr, Name ": Not enough devices to "
1014 "start the array.\n");
1015 else if (!enough(info.array.level,
1016 info.array.raid_disks,
1017 info.array.layout, clean,
1018 avail, okcnt))
1019 fprintf(stderr, Name ": Not enough devices to "
1020 "start the array while not clean "
1021 "- consider --force.\n");
1022
1023 if (must_close) close(mdfd);
1024 return 1;
1025 }
1026 if (runstop == -1) {
1027 fprintf(stderr, Name ": %s assembled from %d drive%s",
1028 mddev, okcnt, okcnt==1?"":"s");
1029 if (okcnt != info.array.raid_disks)
1030 fprintf(stderr, " (out of %d)", info.array.raid_disks);
1031 fprintf(stderr, ", but not started.\n");
1032 if (must_close) close(mdfd);
1033 return 0;
1034 }
1035 if (verbose >= -1) {
1036 fprintf(stderr, Name ": %s assembled from %d drive%s", mddev, okcnt, okcnt==1?"":"s");
1037 if (sparecnt)
1038 fprintf(stderr, " and %d spare%s", sparecnt, sparecnt==1?"":"s");
1039 if (!enough(info.array.level, info.array.raid_disks,
1040 info.array.layout, 1, avail, okcnt))
1041 fprintf(stderr, " - not enough to start the array.\n");
1042 else if (!enough(info.array.level,
1043 info.array.raid_disks,
1044 info.array.layout, clean,
1045 avail, okcnt))
1046 fprintf(stderr, " - not enough to start the "
1047 "array while not clean - consider "
1048 "--force.\n");
1049 else {
1050 if (req_cnt == info.array.raid_disks)
1051 fprintf(stderr, " - need all %d to start it", req_cnt);
1052 else
1053 fprintf(stderr, " - need %d of %d to start", req_cnt, info.array.raid_disks);
1054 fprintf(stderr, " (use --run to insist).\n");
1055 }
1056 }
1057 if (must_close) close(mdfd);
1058 return 1;
1059 } else {
1060 /* The "chosen_drive" is a good choice, and if necessary, the superblock has
1061 * been updated to point to the current locations of devices.
1062 * so we can just start the array
1063 */
1064 unsigned long dev;
1065 dev = makedev(devices[chosen_drive].i.disk.major,
1066 devices[chosen_drive].i.disk.minor);
1067 if (ioctl(mdfd, START_ARRAY, dev)) {
1068 fprintf(stderr, Name ": Cannot start array: %s\n",
1069 strerror(errno));
1070 }
1071
1072 }
1073 if (must_close) close(mdfd);
1074 return 0;
1075 }