md.man

   1 MD(4)                                                       MD(4)
   2
   3
   4
   5 N\bNA\bAM\bME\bE
   6        md - Multiple Device driver aka Linux Software Raid
   7
   8 S\bSY\bYN\bNO\bOP\bPS\bSI\bIS\bS
   9        /\b/d\bde\bev\bv/\b/m\bmd\bd_\bn
  10        /\b/d\bde\bev\bv/\b/m\bmd\bd/\b/_\bn
  11
  12 D\bDE\bES\bSC\bCR\bRI\bIP\bPT\bTI\bIO\bON\bN
  13        The  m\bmd\bd  driver  provides virtual devices that are created
  14        from one or more  independant  underlying  devices.   This
  15        array  of devices often contains redundancy, and hence the
  16        acronym RAID which stands for a Redundant Array  of  Inde-
  17        pendant Devices.
  18
  19        m\bmd\bd support RAID levels 1 (mirroring) 4 (striped array with
  20        parity device) and 5 (striped array with distributed  par-
  21        ity  information.   If  a  single  underlying device fails
  22        while using one of these level, the array will continue to
  23        function.
  24
  25        m\bmd\bd  also  supports a number of pseudo RAID (non-redundant)
  26        configuations  including  RAID0  (striped  array),  LINEAR
  27        (catenated array) and MULTIPATH (a set of different inter-
  28        faces to the same device).
  29
  30
  31    M\bMD\bD S\bSU\bUP\bPE\bER\bR B\bBL\bLO\bOC\bCK\bK
  32        With the exception of Legacy Arrays described below,  each
  33        device  that is incorportated into an MD array has a _\bs_\bu_\bp_\be_\br
  34        _\bb_\bl_\bo_\bc_\bk  written  towards  the  end  of  the  device.   This
  35        superblock  records  information  about  the structure and
  36        state of the array so that the array can be  reliably  re-
  37        assembled after a shutdown.
  38
  39        The  superblock  is  4K  long  and  is  written into a 64K
  40        aligned block that starts at least 64K and less than  128K
  41        from the end of the device (i.e. to get the address of the
  42        superblock round the size of the device down to a multiple
  43        of 64K and then subtract 64K).  The available size of each
  44        device is the amount of space before the super  block,  so
  45        between 64K and 128K is lost when a device in incorporated
  46        into an MD array.
  47
  48        The superblock contains, among other things:
  49
  50        LEVEL  The manner in which the devices are  arranged  into
  51               the array (linear, raid0, raid1, raid4, raid5, mul-
  52               tipath).
  53
  54        UUID   a 128 bit Universally Unique Identifier that  iden-
  55               tifies the array that this device is part of.
  56
  57
  58    L\bLE\bEG\bGA\bAC\bCY\bY A\bAR\bRR\bRA\bAY\bYS\bS
  59        Early  versions of the m\bmd\bd driver only supported Linear and
  60        Raid0 configurations and so did not use an  MD  superblock
  61        (as  there is not state that needs to be recorded).  While
  62        it is strongly recommended that all newly  created  arrays
  63        utilise  a  superblock to help ensure that they are assem-
  64        bled properly, the m\bmd\bd driver still supports legacy  linear
  65        and raid0 md arrays that do not have a superblock.
  66
  67
  68    L\bLI\bIN\bNE\bEA\bAR\bR
  69        A  linear  array  simply  catenates the available space on
  70        each drive together to form one large virtual drive.
  71
  72        One advantage of this arrangement  over  the  more  common
  73        RAID0 arrangement is that the array may be reconfigured at
  74        a later time with an extra drive and so the array is  made
  75        bigger  without  disturbing the data that is on the array.
  76        However this cannot be done on a live array.
  77
  78
  79
  80
  81    R\bRA\bAI\bID\bD0\b0
  82        A RAID0 array (which has zero redundancy) is also known as
  83        a striped array.
  84
  85    R\bRA\bAI\bID\bD1\b1
  86    R\bRA\bAI\bID\bD4\b4
  87    R\bRA\bAI\bID\bD5\b5
  88    M\bMU\bUT\bTI\bIP\bPA\bAT\bTH\bH
  89    R\bRE\bEB\bBU\bUI\bIL\bLD\bD/\b/R\bRE\bES\bSY\bYN\bNC\bC
  90 F\bFI\bIL\bLE\bES\bS
  91        /\b/p\bpr\bro\boc\bc/\b/m\bmd\bds\bst\bta\bat\bt
  92               Contains  information about the status of currently
  93               running array.
  94
  95        /\b/p\bpr\bro\boc\bc/\b/s\bsy\bys\bs/\b/d\bde\bev\bv/\b/r\bra\bai\bid\bd/\b/s\bsp\bpe\bee\bed\bd_\b_l\bli\bim\bmi\bit\bt_\b_m\bmi\bin\bn
  96               A readable and writable file that reflects the cur-
  97               rent  goal rebuild speed for times when non-rebuild
  98               activity is current on an array.  The speed  is  in
  99               Kibibytes per second, and is a per-device rate, not
 100               a per-array rate (which means that  an  array  with
 101               more  disc  will  shuffle  more  data  for  a given
 102               speed).   The default is 100.
 103
 104
 105        /\b/p\bpr\bro\boc\bc/\b/s\bsy\bys\bs/\b/d\bde\bev\bv/\b/r\bra\bai\bid\bd/\b/s\bsp\bpe\bee\bed\bd_\b_l\bli\bim\bmi\bit\bt_\b_m\bma\bax\bx
 106               A readable and writable file that reflects the cur-
 107               rent  goal  rebuild  speed  for  times when no non-
 108               rebuild activity  is  current  on  an  array.   The
 109               default is 100,000.
 110
 111
 112 S\bSE\bEE\bE A\bAL\bLS\bSO\bO
 113        m\bmd\bda\bad\bdm\bm(8), m\bmk\bkr\bra\bai\bid\bd(8).
 114
 115
 116
 117                                                             MD(4)