Update various man pages to place HISTORY section after SEE ALSO

SEE ALSO before HISTORY is the more common pattern in OpenSSL manual
pages and seems to be the prevalent order based on sampling my system
manual pages.

Fixes #8631

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8729)

diff --git a/doc/man3/BIO_connect.pod b/doc/man3/BIO_connect.pod
index 00e4463c2ea558752931ed0c90c9e0098138bddb..240b21052ce65c84688641edd7ca147b400bad77 100644 (file)
--- a/doc/man3/BIO_connect.pod
+++ b/doc/man3/BIO_connect.pod
@@ -95,19 +95,19 @@ B<INVALID_SOCKET> (-1) on error.  When an error has occurred, the
 OpenSSL error stack will hold the error data and errno has the system
 error.
 
+=head1 SEE ALSO
+
+L<BIO_ADDR(3)>
+
 =head1 HISTORY
 
 BIO_gethostname(), BIO_get_port(), BIO_get_host_ip(),
 BIO_get_accept_socket() and BIO_accept() were deprecated in
 OpenSSL 1.1.0.  Use the functions described above instead.
 
-=head1 SEE ALSO
-
-L<BIO_ADDR(3)>
-
 =head1 COPYRIGHT
 
-Copyright 2016-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2016-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy

diff --git a/doc/man3/BN_rand.pod b/doc/man3/BN_rand.pod
index 3ceeff1d31311d2ecf7414508f0f86750ab46710..93e8c3f9d47d786556365231a8b8a0f6fea2468c 100644 (file)
--- a/doc/man3/BN_rand.pod
+++ b/doc/man3/BN_rand.pod
@@ -59,6 +59,15 @@ seeded with enough randomness to ensure an unpredictable byte sequence.
 The functions return 1 on success, 0 on error.
 The error codes can be obtained by L<ERR_get_error(3)>.
 
+=head1 SEE ALSO
+
+L<ERR_get_error(3)>,
+L<RAND_add(3)>,
+L<RAND_bytes(3)>,
+L<RAND_priv_bytes(3)>,
+L<RAND(7)>,
+L<RAND_DRBG(7)>
+
 =head1 HISTORY
 
 =over 2
@@ -78,18 +87,9 @@ BN_priv_rand() and BN_priv_rand_range() functions were added in OpenSSL 1.1.1.
 
 =back
 
-=head1 SEE ALSO
-
-L<ERR_get_error(3)>,
-L<RAND_add(3)>,
-L<RAND_bytes(3)>,
-L<RAND_priv_bytes(3)>,
-L<RAND(7)>,
-L<RAND_DRBG(7)>
-
 =head1 COPYRIGHT
 
-Copyright 2000-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2000-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy

diff --git a/doc/man3/BN_security_bits.pod b/doc/man3/BN_security_bits.pod
index 3b9bf887242ecff60886a153f97ac8e358267124..f02bf2e0551d4967eb13b77a23bd6664684f4a97 100644 (file)
--- a/doc/man3/BN_security_bits.pod
+++ b/doc/man3/BN_security_bits.pod
@@ -31,17 +31,17 @@ Number of security bits.
 ECC (Elliptic Curve Cryptography) is not covered by the BN_security_bits()
 function. The symmetric algorithms are not covered neither.
 
-=head1 HISTORY
-
-The BN_security_bits() function was added in OpenSSL 1.1.0.
-
 =head1 SEE ALSO
 
 L<DH_security_bits(3)>, L<DSA_security_bits(3)>, L<RSA_security_bits(3)>
 
+=head1 HISTORY
+
+The BN_security_bits() function was added in OpenSSL 1.1.0.
+
 =head1 COPYRIGHT
 
-Copyright 2017 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2017-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy

diff --git a/doc/man3/DES_random_key.pod b/doc/man3/DES_random_key.pod
index f5203b8499a09d6620da881928d817363cd64362..4f0f25a5a4a0a5d785a81b21f5520b486a5c280a 100644 (file)
--- a/doc/man3/DES_random_key.pod
+++ b/doc/man3/DES_random_key.pod
@@ -296,6 +296,11 @@ last 4 bytes of the checksum of the input.
 DES_fcrypt() returns a pointer to the caller-provided buffer and DES_crypt() -
 to a static buffer on success; otherwise they return NULL.
 
+=head1 SEE ALSO
+
+L<des_modes(7)>,
+L<EVP_EncryptInit(3)>
+
 =head1 HISTORY
 
 The requirement that the B<salt> parameter to DES_crypt() and DES_fcrypt()
@@ -304,14 +309,9 @@ OpenSSL 1.1.0.  Previous versions tried to use the letter uppercase B<A>
 if both character were not present, and could crash when given non-ASCII
 on some platforms.
 
-=head1 SEE ALSO
-
-L<des_modes(7)>,
-L<EVP_EncryptInit(3)>
-
 =head1 COPYRIGHT
 
-Copyright 2000-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2000-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy

diff --git a/doc/man3/PEM_read_bio_PrivateKey.pod b/doc/man3/PEM_read_bio_PrivateKey.pod
index a5a63c48b80ee9e6c347da7a522a841b4f3e836a..69ff679b2d1ccc54f7ab55d189ce448fc8bb96c9 100644 (file)
--- a/doc/man3/PEM_read_bio_PrivateKey.pod
+++ b/doc/man3/PEM_read_bio_PrivateKey.pod
@@ -459,20 +459,20 @@ Skeleton pass phrase callback:
      return len;
  }
 
+=head1 SEE ALSO
+
+L<EVP_EncryptInit(3)>, L<EVP_BytesToKey(3)>,
+L<passphrase-encoding(7)>
+
 =head1 HISTORY
 
 The old Netscape certificate sequences were no longer documented
 in OpenSSL 1.1.0; applications should use the PKCS7 standard instead
 as they will be formally deprecated in a future releases.
 
-=head1 SEE ALSO
-
-L<EVP_EncryptInit(3)>, L<EVP_BytesToKey(3)>,
-L<passphrase-encoding(7)>
-
 =head1 COPYRIGHT
 
-Copyright 2001-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2001-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy

diff --git a/doc/man3/RAND_DRBG_generate.pod b/doc/man3/RAND_DRBG_generate.pod
index 09903f8ca9dc39551dbfe5bb249d081d82c54e1f..e0778ea22462d66613c1656b8c4306aba03be234 100644 (file)
--- a/doc/man3/RAND_DRBG_generate.pod
+++ b/doc/man3/RAND_DRBG_generate.pod
@@ -65,12 +65,6 @@ entropy from a live entropy source (section 5.5.2 of [NIST SP 800-90C]).
 It is up to the user to ensure that a live entropy source is configured
 and is being used.
 
-=head1 HISTORY
-
-The RAND_DRBG functions were added in OpenSSL 1.1.1.
-
-Prediction resistance is supported from OpenSSL 3.0.0.
-
 =head1 SEE ALSO
 
 L<RAND_bytes(3)>,
@@ -78,9 +72,15 @@ L<RAND_DRBG_set_reseed_interval(3)>,
 L<RAND_DRBG_set_reseed_time_interval(3)>,
 L<RAND_DRBG(7)>
 
+=head1 HISTORY
+
+The RAND_DRBG functions were added in OpenSSL 1.1.1.
+
+Prediction resistance is supported from OpenSSL 3.0.0.
+
 =head1 COPYRIGHT
 
-Copyright 2017-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2017-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy

diff --git a/doc/man3/RAND_DRBG_get0_master.pod b/doc/man3/RAND_DRBG_get0_master.pod
index e82988739216b585f46cded2fa027dafc81a8bfb..62f6fdbdd09f4a89e8a7d3b2293707405fba50ac 100644 (file)
--- a/doc/man3/RAND_DRBG_get0_master.pod
+++ b/doc/man3/RAND_DRBG_get0_master.pod
@@ -53,11 +53,6 @@ During initialization, it is possible to change the reseed interval
 and reseed time interval.
 It is also possible to exchange the reseeding callbacks entirely.
 
-
-=head1 HISTORY
-
-The RAND_DRBG functions were added in OpenSSL 1.1.1.
-
 =head1 SEE ALSO
 
 L<RAND_DRBG_set_callbacks(3)>,
@@ -68,9 +63,13 @@ L<RAND_DRBG_set_callbacks(3)>,
 L<RAND_DRBG_generate(3)>,
 L<RAND_DRBG(7)>
 
+=head1 HISTORY
+
+The RAND_DRBG functions were added in OpenSSL 1.1.1.
+
 =head1 COPYRIGHT
 
-Copyright 2017-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2017-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy

diff --git a/doc/man3/RAND_DRBG_new.pod b/doc/man3/RAND_DRBG_new.pod
index 27142abf19e3f1654c4282f9843a07458b200289..8b7384069711611ca33b5b9164f55e357d735862 100644 (file)
--- a/doc/man3/RAND_DRBG_new.pod
+++ b/doc/man3/RAND_DRBG_new.pod
@@ -134,10 +134,6 @@ To ensure that they are applied to the global and thread-local DRBG instances
 RAND_DRBG_set_defaults() before creating any thread and before calling any
 cryptographic routines that obtain random data directly or indirectly.
 
-=head1 HISTORY
-
-The RAND_DRBG functions were added in OpenSSL 1.1.1.
-
 =head1 SEE ALSO
 
 L<OPENSSL_zalloc(3)>,
@@ -145,9 +141,13 @@ L<OPENSSL_secure_zalloc(3)>,
 L<RAND_DRBG_generate(3)>,
 L<RAND_DRBG(7)>
 
+=head1 HISTORY
+
+The RAND_DRBG functions were added in OpenSSL 1.1.1.
+
 =head1 COPYRIGHT
 
-Copyright 2017-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2017-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy

diff --git a/doc/man3/RAND_DRBG_reseed.pod b/doc/man3/RAND_DRBG_reseed.pod
index c4d2671ba5a558c9af595ac59b378f50054ff240..40375603f770a40922383045e2644486a83da19b 100644 (file)
--- a/doc/man3/RAND_DRBG_reseed.pod
+++ b/doc/man3/RAND_DRBG_reseed.pod
@@ -93,17 +93,6 @@ To ensure that they are applied to the global and thread-local DRBG instances
 RAND_DRBG_set_reseed_defaults() before creating any thread and before calling any
  cryptographic routines that obtain random data directly or indirectly.
 
-A request for prediction resistance can only be satisfied by pulling fresh
-entropy from a live entropy source (section 5.5.2 of [NIST SP 800-90C]).
-It is up to the user to ensure that a live entropy source is configured
-and is being used.
-
-=head1 HISTORY
-
-The RAND_DRBG functions were added in OpenSSL 1.1.1.
-
-Prediction resistance is supported from OpenSSL 3.0.0.
-
 =head1 SEE ALSO
 
 L<RAND_DRBG_generate(3)>,
@@ -111,9 +100,15 @@ L<RAND_DRBG_bytes(3)>,
 L<RAND_DRBG_set_callbacks(3)>.
 L<RAND_DRBG(7)>
 
+=head1 HISTORY
+
+The RAND_DRBG functions were added in OpenSSL 1.1.1.
+
+Prediction resistance is supported from OpenSSL 3.0.0.
+
 =head1 COPYRIGHT
 
-Copyright 2017-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2017-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy

diff --git a/doc/man3/RAND_DRBG_set_callbacks.pod b/doc/man3/RAND_DRBG_set_callbacks.pod
index 4734b0729577d5e22e62746d8024605ded1dfd14..09a6ef1f7e04742853b0ff624dc6d9a39e3a3c28 100644 (file)
--- a/doc/man3/RAND_DRBG_set_callbacks.pod
+++ b/doc/man3/RAND_DRBG_set_callbacks.pod
@@ -121,20 +121,19 @@ In this case the DRBG will automatically request an extra amount of entropy
 utilize for the nonce, following the recommendations of [NIST SP 800-90A Rev. 1],
 section 8.6.7.
 
-
-=head1 HISTORY
-
-The RAND_DRBG functions were added in OpenSSL 1.1.1.
-
 =head1 SEE ALSO
 
 L<RAND_DRBG_new(3)>,
 L<RAND_DRBG_reseed(3)>,
 L<RAND_DRBG(7)>
 
+=head1 HISTORY
+
+The RAND_DRBG functions were added in OpenSSL 1.1.1.
+
 =head1 COPYRIGHT
 
-Copyright 2017-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2017-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy

diff --git a/doc/man3/RAND_add.pod b/doc/man3/RAND_add.pod
index 65232d979d199185e8bc13517a2f6fff8cbd7fb7..ed7824db7fd05937e59d7f02bd33ece8601ab7a6 100644 (file)
--- a/doc/man3/RAND_add.pod
+++ b/doc/man3/RAND_add.pod
@@ -80,11 +80,6 @@ RAND_event() returns RAND_status().
 
 The other functions do not return values.
 
-=head1 HISTORY
-
-RAND_event() and RAND_screen() were deprecated in OpenSSL 1.1.0 and should
-not be used.
-
 =head1 SEE ALSO
 
 L<RAND_bytes(3)>,
@@ -92,9 +87,14 @@ L<RAND_egd(3)>,
 L<RAND_load_file(3)>,
 L<RAND(7)>
 
+=head1 HISTORY
+
+RAND_event() and RAND_screen() were deprecated in OpenSSL 1.1.0 and should
+not be used.
+
 =head1 COPYRIGHT
 
-Copyright 2000-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2000-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy

diff --git a/doc/man3/RAND_bytes.pod b/doc/man3/RAND_bytes.pod
index 86d37b3f847737c6312632981c1fa523cd0fe699..fb1e1c9a223bb7511568f351dfa19f32dd22ce20 100644 (file)
--- a/doc/man3/RAND_bytes.pod
+++ b/doc/man3/RAND_bytes.pod
@@ -43,6 +43,15 @@ return 1 on success, -1 if not supported by the current
 RAND method, or 0 on other failure. The error code can be
 obtained by L<ERR_get_error(3)>.
 
+=head1 SEE ALSO
+
+L<RAND_add(3)>,
+L<RAND_bytes(3)>,
+L<RAND_priv_bytes(3)>,
+L<ERR_get_error(3)>,
+L<RAND(7)>,
+L<RAND_DRBG(7)>
+
 =head1 HISTORY
 
 =over 2
@@ -57,18 +66,9 @@ The RAND_priv_bytes() function was added in OpenSSL 1.1.1.
 
 =back
 
-=head1 SEE ALSO
-
-L<RAND_add(3)>,
-L<RAND_bytes(3)>,
-L<RAND_priv_bytes(3)>,
-L<ERR_get_error(3)>,
-L<RAND(7)>,
-L<RAND_DRBG(7)>
-
 =head1 COPYRIGHT
 
-Copyright 2000-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2000-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy

diff --git a/doc/man3/RAND_cleanup.pod b/doc/man3/RAND_cleanup.pod
index 129d579364840721c528fd5a69b636cba6fd976a..dfe76a7b705fad7326ee7e3b3ac39728b35ad83b 100644 (file)
--- a/doc/man3/RAND_cleanup.pod
+++ b/doc/man3/RAND_cleanup.pod
@@ -25,18 +25,18 @@ L<OPENSSL_init_crypto(3)>.
 
 RAND_cleanup() returns no value.
 
+=head1 SEE ALSO
+
+L<RAND(7)>
+
 =head1 HISTORY
 
 RAND_cleanup() was deprecated in OpenSSL 1.1.0; do not use it.
 See L<OPENSSL_init_crypto(3)>
 
-=head1 SEE ALSO
-
-L<RAND(7)>
-
 =head1 COPYRIGHT
 
-Copyright 2000-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2000-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy

diff --git a/doc/man3/SSL_CIPHER_get_name.pod b/doc/man3/SSL_CIPHER_get_name.pod
index 1da3447b444eab3dc397cb1e0894c2fdeae0c924..26ee6a0fa193e83a19bd1d8db18f859f4f5d53d3 100644 (file)
--- a/doc/man3/SSL_CIPHER_get_name.pod
+++ b/doc/man3/SSL_CIPHER_get_name.pod
@@ -180,6 +180,11 @@ SSL_CIPHER_get_id() returns a 4-byte integer representing the OpenSSL-specific I
 SSL_CIPHER_get_protocol_id() returns a 2-byte integer representing the TLS
 protocol-specific ID.
 
+=head1 SEE ALSO
+
+L<ssl(7)>, L<SSL_get_current_cipher(3)>,
+L<SSL_get_ciphers(3)>, L<ciphers(1)>
+
 =head1 HISTORY
 
 The SSL_CIPHER_get_version() function was updated to always return the
@@ -196,14 +201,9 @@ required to enable this function.
 
 The OPENSSL_cipher_name() function was added in OpenSSL 1.1.1.
 
-=head1 SEE ALSO
-
-L<ssl(7)>, L<SSL_get_current_cipher(3)>,
-L<SSL_get_ciphers(3)>, L<ciphers(1)>
-
 =head1 COPYRIGHT
 
-Copyright 2000-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2000-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy

diff --git a/doc/man3/SSL_CTX_new.pod b/doc/man3/SSL_CTX_new.pod
index 371827d87b9d417bf1c6ff7f2a7e7408cd43d7c3..f1dffadc6e64abb04ebe21bcf6a45e76b861ef16 100644 (file)
--- a/doc/man3/SSL_CTX_new.pod
+++ b/doc/man3/SSL_CTX_new.pod
@@ -190,6 +190,11 @@ SSL_CTX_up_ref() returns 1 for success and 0 for failure.
 
 =back
 
+=head1 SEE ALSO
+
+L<SSL_CTX_set_options(3)>, L<SSL_CTX_free(3)>, L<SSL_accept(3)>,
+L<SSL_CTX_set_min_proto_version(3)>, L<ssl(7)>, L<SSL_set_connect_state(3)>
+
 =head1 HISTORY
 
 Support for SSLv2 and the corresponding SSLv2_method(),
@@ -202,14 +207,9 @@ and TLS_client_method() functions were introduced in OpenSSL 1.1.0.
 
 All version-specific methods were deprecated in OpenSSL 1.1.0.
 
-=head1 SEE ALSO
-
-L<SSL_CTX_set_options(3)>, L<SSL_CTX_free(3)>, L<SSL_accept(3)>,
-L<SSL_CTX_set_min_proto_version(3)>, L<ssl(7)>, L<SSL_set_connect_state(3)>
-
 =head1 COPYRIGHT
 
-Copyright 2000-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2000-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy

diff --git a/doc/man3/SSL_CTX_set_default_passwd_cb.pod b/doc/man3/SSL_CTX_set_default_passwd_cb.pod
index 4d381648b0de2924384ec008e473a585dbd87039..bc19890c6d6a0b501bbd69b87f7eabdae4256750 100644 (file)
--- a/doc/man3/SSL_CTX_set_default_passwd_cb.pod
+++ b/doc/man3/SSL_CTX_set_default_passwd_cb.pod
@@ -90,20 +90,20 @@ truncated.
      return strlen(buf);
  }
 
+=head1 SEE ALSO
+
+L<ssl(7)>,
+L<SSL_CTX_use_certificate(3)>
+
 =head1 HISTORY
 
 SSL_CTX_get_default_passwd_cb(), SSL_CTX_get_default_passwd_cb_userdata(),
 SSL_set_default_passwd_cb() and SSL_set_default_passwd_cb_userdata() were
 added in OpenSSL 1.1.0.
 
-=head1 SEE ALSO
-
-L<ssl(7)>,
-L<SSL_CTX_use_certificate(3)>
-
 =head1 COPYRIGHT
 
-Copyright 2000-2016 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2000-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy

diff --git a/doc/man3/SSL_CTX_set_min_proto_version.pod b/doc/man3/SSL_CTX_set_min_proto_version.pod
index 32a47cf65f4d56725eaf69aa7695bfa499164cd6..45f82107a7e5a21417de9b391b9fc9cfcb8179b1 100644 (file)
--- a/doc/man3/SSL_CTX_set_min_proto_version.pod
+++ b/doc/man3/SSL_CTX_set_min_proto_version.pod
@@ -52,18 +52,18 @@ lowest or highest protocol, respectively.
 
 All these functions are implemented using macros.
 
+=head1 SEE ALSO
+
+L<SSL_CTX_set_options(3)>, L<SSL_CONF_cmd(3)>
+
 =head1 HISTORY
 
 The setter functions were added in OpenSSL 1.1.0. The getter functions
 were added in OpenSSL 1.1.1.
 
-=head1 SEE ALSO
-
-L<SSL_CTX_set_options(3)>, L<SSL_CONF_cmd(3)>
-
 =head1 COPYRIGHT
 
-Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2016-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy

diff --git a/doc/man3/SSL_CTX_set_split_send_fragment.pod b/doc/man3/SSL_CTX_set_split_send_fragment.pod
index cf595eef7621de5c880951e6c5198fb5ae691f60..5f0ff3f748ae459d0d321c3b299e28abf22fc5a2 100644 (file)
--- a/doc/man3/SSL_CTX_set_split_send_fragment.pod
+++ b/doc/man3/SSL_CTX_set_split_send_fragment.pod
@@ -162,6 +162,10 @@ SSL_set_default_read_buffer_len(), SSL_CTX_set_tlsext_max_fragment_length(),
 SSL_set_tlsext_max_fragment_length() and SSL_SESSION_get_max_fragment_length()
 all these functions are implemented using macros.
 
+=head1 SEE ALSO
+
+L<SSL_CTX_set_read_ahead(3)>, L<SSL_pending(3)>
+
 =head1 HISTORY
 
 The SSL_CTX_set_max_pipelines(), SSL_set_max_pipelines(),
@@ -172,13 +176,9 @@ functions were added in OpenSSL 1.1.0.
 The SSL_CTX_set_tlsext_max_fragment_length(), SSL_set_tlsext_max_fragment_length()
 and SSL_SESSION_get_max_fragment_length() functions were added in OpenSSL 1.1.1.
 
-=head1 SEE ALSO
-
-L<SSL_CTX_set_read_ahead(3)>, L<SSL_pending(3)>
-
 =head1 COPYRIGHT
 
-Copyright 2016-2017 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2016-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy

diff --git a/doc/man3/SSL_read.pod b/doc/man3/SSL_read.pod
index c60bd230f678b1f3b05d24c893fe58ee73202740..f5c02a35adf6920d93e19433d10b86d8f0f98aa5 100644 (file)
--- a/doc/man3/SSL_read.pod
+++ b/doc/man3/SSL_read.pod
@@ -126,10 +126,6 @@ You should instead call SSL_get_error() to find out if it's retryable.
 
 =back
 
-=head1 HISTORY
-
-The SSL_read_ex() and SSL_peek_ex() functions were added in OpenSSL 1.1.1.
-
 =head1 SEE ALSO
 
 L<SSL_get_error(3)>, L<SSL_write_ex(3)>,
@@ -140,9 +136,13 @@ L<SSL_pending(3)>,
 L<SSL_shutdown(3)>, L<SSL_set_shutdown(3)>,
 L<ssl(7)>, L<bio(7)>
 
+=head1 HISTORY
+
+The SSL_read_ex() and SSL_peek_ex() functions were added in OpenSSL 1.1.1.
+
 =head1 COPYRIGHT
 
-Copyright 2000-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2000-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy

diff --git a/doc/man3/SSL_write.pod b/doc/man3/SSL_write.pod
index 4daaec2d31ee86dcfd3f347e0dca6303b992d58c..a73bc062cefed11daad00c408ef8906dddc3caa0 100644 (file)
--- a/doc/man3/SSL_write.pod
+++ b/doc/man3/SSL_write.pod
@@ -104,10 +104,6 @@ You should instead call SSL_get_error() to find out if it's retryable.
 
 =back
 
-=head1 HISTORY
-
-The SSL_write_ex() function was added in OpenSSL 1.1.1.
-
 =head1 SEE ALSO
 
 L<SSL_get_error(3)>, L<SSL_read_ex(3)>, L<SSL_read(3)>
@@ -116,9 +112,13 @@ L<SSL_connect(3)>, L<SSL_accept(3)>
 L<SSL_set_connect_state(3)>,
 L<ssl(7)>, L<bio(7)>
 
+=head1 HISTORY
+
+The SSL_write_ex() function was added in OpenSSL 1.1.1.
+
 =head1 COPYRIGHT
 
-Copyright 2000-2018 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2000-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy

diff --git a/doc/man3/X509_get_subject_name.pod b/doc/man3/X509_get_subject_name.pod
index 21bb40301d2a08fce6b908749b4f559a2cbfc8cd..8c9d854b9a6bfc2f073bffae583fbe6c21479605 100644 (file)
--- a/doc/man3/X509_get_subject_name.pod
+++ b/doc/man3/X509_get_subject_name.pod
@@ -48,14 +48,6 @@ and X509_CRL_get_issuer() return an B<X509_NAME> pointer.
 X509_set_subject_name(), X509_set_issuer_name(), X509_REQ_set_subject_name()
 and X509_CRL_set_issuer_name() return 1 for success and 0 for failure.
 
-=head1 HISTORY
-
-X509_REQ_get_subject_name() is a function in OpenSSL 1.1.0 and a macro in
-earlier versions.
-
-X509_CRL_get_issuer() is a function in OpenSSL 1.1.0. It was previously
-added in OpenSSL 1.0.0 as a macro.
-
 =head1 SEE ALSO
 
 L<d2i_X509(3)>,
@@ -74,9 +66,17 @@ L<X509_sign(3)>,
 L<X509V3_get_d2i(3)>,
 L<X509_verify_cert(3)>
 
+=head1 HISTORY
+
+X509_REQ_get_subject_name() is a function in OpenSSL 1.1.0 and a macro in
+earlier versions.
+
+X509_CRL_get_issuer() is a function in OpenSSL 1.1.0. It was previously
+added in OpenSSL 1.0.0 as a macro.
+
 =head1 COPYRIGHT
 
-Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved.
+Copyright 2015-2019 The OpenSSL Project Authors. All Rights Reserved.
 
 Licensed under the Apache License 2.0 (the "License").  You may not use
 this file except in compliance with the License.  You can obtain a copy