Richard Levitte [Tue, 11 Feb 2020 05:29:08 +0000 (06:29 +0100)]
Adapt i2d_PrivateKey for provider only keys
It uses EVP_PKEY serializers to get the desired results.
One might think that ddoing this might make things a bit dicy for
existing serializers, as they should obviously use i2d functions.
However, since our serializers use much more primitive functions
such as i2d_ASN1_INTEGER(), or keytype specific ones such as
i2d_RSAPrivateKey(), there is no clash.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11056)
H.J. Lu [Fri, 31 Jan 2020 17:13:27 +0000 (09:13 -0800)]
x86_64: Always generate .note.gnu.property section for ELF outputs
We should always generate .note.gnu.property section in x86_64 assembly
codes for ELF outputs to mark Intel CET support since all input files
must be marked with Intel CET support in order for linker to mark output
with Intel CET support. Also .note.gnu.property section in x32 should
be aligned to 4 bytes, not 8 bytes and .p2align should be used
consistently.
Verified with
$ CC="gcc -Wl,-z,cet-report=error" ./Configure shared linux-x86_64 -fcf-protection
$ make
$ make test
and
$ CC="gcc -mx32 -Wl,-z,cet-report=error" ./Configure shared linux-x32 -fcf-protection
$ make
$ make test # <<< 90-test_sslapi.t failed because 8-byte pointer size.
Fix #10896
Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Paul Dale <paul.dale@oracle.com> Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10985)
Reviewed-by: Paul Dale <paul.dale@oracle.com> Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11054)
Matt Caswell [Wed, 12 Feb 2020 09:19:41 +0000 (09:19 +0000)]
Fix no-ec build
Don't attempt to build ecx related source files in a "no-ec" build.
Reviewed-by: Paul Dale <paul.dale@oracle.com> Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11065)
fix build for new HTTP client in case OPENSSL_NO_CMP or OPENSSL_NO_OCSP
fix also formatting nits w.r.t. #if indentations in ocsp.h
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11058)
Matt Caswell [Mon, 27 Jan 2020 16:50:47 +0000 (16:50 +0000)]
Implement a stricter ECX_KEY type
Add ref counting and control how we allocate storage for the private key.
We will need this type in following commits where we move the ecx code
to be provider aware.
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com> Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10964)
Kurt Roeckx [Thu, 2 Jan 2020 22:16:30 +0000 (23:16 +0100)]
Generate new Ed488 certificates
Create a whole chain of Ed488 certificates so that we can use it at security
level 4 (192 bit). We had an 2048 bit RSA (112 bit, level 2) root sign the
Ed488 certificate using SHA256 (128 bit, level 3).
Reviewed-by: Matt Caswell <matt@openssl.org>
GH: #10785
Generalize the HTTP client so far implemented mostly in crypto/ocsp/ocsp_ht.c
The new client has become an independent libcrpyto module in crypto/http/ and
* can handle any types of requests and responses (ASN.1-encoded and plain)
* does not include potentially busy loops when waiting for responses but
* makes use of a new timeout mechanism integrated with socket-based BIO
* supports the use of HTTP proxies and TLS, including HTTPS over proxies
* supports HTTP redirection via codes 301 and 302 for GET requests
* returns more useful diagnostics in various error situations
Also adapts - and strongly simplifies - hitherto uses of HTTP in crypto/ocsp/,
crypto/x509/x_all.c, apps/lib/apps.c, and apps/{ocsp,s_client,s_server}.c
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/10667)
add BIO_socket_wait(), BIO_wait(), and BIO_connect_retry() improving timeout support
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/10667)
Richard Levitte [Fri, 7 Feb 2020 08:09:50 +0000 (09:09 +0100)]
PROV: Ensure the AlgorithmIdentifier registers in DSA signature impl
When setting up the hash function for DSA signature, the encoded
AlgorithmIdentifier for the DSA+hash combination is queried, but not
stored, which leads to problems when signing ASN.1 items in libcrypto.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11037)
Davide Galassi [Mon, 10 Feb 2020 06:49:10 +0000 (16:49 +1000)]
Memory allocator code cleanup
Typedefs of CRYPTO malloc, realloc and free.
MEM_CHECK "modes" are used only as a CRYPTO_mem_ctrl() parameter
The CRYPTO_mem_ctrl is defined only if OPENSSL_NO_CRYPTO_MDEBUG is
defined, thus define the MEM_CHECK modes under the same condition.
Maybe the macros can be removed at all since:
1. CRYPTO_mem_ctrl() just returns -1 and ignores the parameter
2. CRYPTO_mem_ctr() is declared as DEPRECATED by 3.0
Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11042)
H.J. Lu [Sat, 14 Dec 2019 17:48:18 +0000 (09:48 -0800)]
x86: Always generate .note.gnu.property section for ELF outputs
We should always generate .note.gnu.property section in x86 assembly
codes for ELF outputs to mark Intel CET support since all input files
must be marked with Intel CET support in order for linker to mark output
with Intel CET support.
Verified with
$ CC="gcc -Wl,-z,cet-report=error" ./Configure shared linux-x86 -fcf-protection
$ make
$ make test
Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11044)
H.J. Lu [Sat, 14 Dec 2019 00:46:07 +0000 (16:46 -0800)]
Use swapcontext for Intel CET
When Intel CET is enabled, makecontext will create a different shadow
stack for each context. async_fibre_swapcontext cannot use _longjmp.
It must call swapcontext to swap shadow stack as well as normal stack.
Reviewed-by: Paul Dale <paul.dale@oracle.com> Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10983)
Richard Levitte [Thu, 6 Feb 2020 10:26:22 +0000 (11:26 +0100)]
Configure: Add easy to use disabled deprecated functionality indicators
In C, we have macros like OPENSSL_NO_DEPRECATED_3_0 to check if some
section of code should be disabled to simulate a removal of things
deprecated in the version.
In perl, we had to check $disabled{deprecated} and compare
$config{api} with the proper version code, which is doable but tedious
and error prone.
This change adds $disabled{'deprecated-x.y'} (x.y being a version
number) which directly corresponds to OPENSSL_NO_DEPRECATED_x_y, for
use in build.info conditions, test recipes and other perl stuff.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11027)
tests/drbgtest: use new RAND_DRBG callback_data API instead of ex_data
It took me a little while to realize why the test_rand_drbg_reseed test
kept crashing after replacing the RAND_DRBG_{gs}et_ex_data() calls by
RAND_DRBG_{gs}et_callback_data().
The reason was that the ex_data API prohibits modifying the callbacks
or callback data of chained DRBGs and returned an error which was
ignored by the `test_rand_drbg_reseed` test, for good reasons.
The `test_rand_drbg_reseed` test is special in this respect, because
it needs to install callbacks for all DRBGs, in order to intercept
and count the reseeding events.
Since the drbgtest module has access to the internal structures of
the DRBG anyway, the problem could be solved by accessing the members
directly. I added a warning comment in hook_drbg().
[extended tests]
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10950)
RAND_DRBG: add a callback data for entropy and nonce callbacks
The callback data allows passing context specific data from the
application of the DRBG to to the entropy callbacks.
This a rather specialized feature which is useful for implementing
known answer tests (KATs) or deterministic signatures (RFC6979),
which require passing a specified entropy and nonce for instantiating
the DRBG.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10950)
FdaSilvaYY [Sat, 19 Oct 2019 16:24:49 +0000 (18:24 +0200)]
Appveyor: update to Visual Studio 2017.
Default image was currently "Visual Studio 2015"
Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10327)
Richard Levitte [Tue, 4 Feb 2020 16:49:28 +0000 (17:49 +0100)]
KEYMGMT: Require both get_params and gettable_params, or none
The same go for the pairs import + import_types and export + export_types.
This required some additional changes in our KEYMGMT implementations.
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Shane Lontis <shane.lontis@oracle.com> Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11006)
Richard Levitte [Mon, 3 Feb 2020 15:36:24 +0000 (16:36 +0100)]
Adapt existing SERIALIZER implementations to the redesigned interface
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Shane Lontis <shane.lontis@oracle.com> Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11006)
Richard Levitte [Mon, 3 Feb 2020 14:36:15 +0000 (15:36 +0100)]
Adapt test/keymgmt_internal_test.c to the redesigned interface
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Shane Lontis <shane.lontis@oracle.com> Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11006)
Richard Levitte [Mon, 3 Feb 2020 11:00:53 +0000 (12:00 +0100)]
Adapt existing KEYMGMT implementations to the redesigned interface
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Shane Lontis <shane.lontis@oracle.com> Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11006)
Richard Levitte [Sun, 2 Feb 2020 17:56:07 +0000 (18:56 +0100)]
Redesign the KEYMGMT libcrypto <-> provider interface - the basics
The KEYMGMT libcrypto <-> provider interface currently makes a few
assumptions:
1. provider side domain parameters and key data isn't mutable. In
other words, as soon as a key has been created in any (loaded,
imported data, ...), it's set in stone.
2. provider side domain parameters can be strictly separated from the
key data.
This does work for the most part, but there are places where that's a
bit too rigid for the functionality that the EVP_PKEY API delivers.
Key data needs to be mutable to allow the flexibility that functions
like EVP_PKEY_copy_parameters promise, as well as to provide the
combinations of data that an EVP_PKEY is generally assumed to be able
to hold:
- domain parameters only
- public key only
- public key + private key
- domain parameters + public key
- domain parameters + public key + private key
To remedy all this, we:
1. let go of the distinction between domain parameters and key
material proper in the libcrypto <-> provider interface.
As a consequence, functions that still need it gain a selection
argument, which is a set of bits that indicate what parts of the
key object are to be considered in a specific call. This allows
a reduction of very similar functions into one.
2. Rework the libcrypto <-> provider interface so provider side key
objects are created and destructed with a separate function, and
get their data filled and extracted in through import and export.
(future work will see other key object constructors and other
functions to fill them with data)
Fixes #10979
squash! Redesign the KEYMGMT libcrypto <-> provider interface - the basics
Remedy 1 needs a rewrite:
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Shane Lontis <shane.lontis@oracle.com> Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11006)
Richard Levitte [Mon, 3 Feb 2020 04:42:48 +0000 (05:42 +0100)]
Reorganize the internal evp_keymgmt functions
Some of the evp_keymgmt_ functions are just wrappers around the
EVP_KEYMGMT function pointers. We move those from keymgmt_lib.c to
keymgmt_meth.c.
Other evp_keymgmt_ functions are utility functions to help the rest of
the EVP functions. Since their names are easily confused with the
functions that were moved to keymgmt_meth.c, we rename them so they
all start with evp_keymgmt_util_.
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Shane Lontis <shane.lontis@oracle.com> Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11006)
PR #10942 introduced the new function ASN1_item_verify_ctx(), but did
not document it with the promise that documentation would follow soon.
We temporarily add this function to missingcrypto.txt until it has been
done.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10980)
Matt Caswell [Fri, 31 Jan 2020 09:43:35 +0000 (09:43 +0000)]
Don't ignore ASN1 when checking for undocumented symbols
When we run "make doc-nits" (which happens during travis runs) it will
complain if we add any new symbols that aren't documented. However it
was suppressing anything starting with ASN1. There's no reason why we
should allow ASN1 symbols to go undocumented any more than any others.
Therefore we remove that exception.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10980)
Rich Salz [Mon, 27 Jan 2020 20:39:17 +0000 (15:39 -0500)]
Remove unused HAS_LFN_SUPPORT
Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com> Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10959)
Rich Salz [Mon, 3 Feb 2020 21:06:42 +0000 (16:06 -0500)]
More accurate doc of -ssl_config option
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/10972)
Rich Salz [Thu, 30 Jan 2020 17:19:13 +0000 (12:19 -0500)]
Update command list
Add -standard-commands option to list command (documented)
Update standard commands list in openssl.pod
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/10972)
Rich Salz [Wed, 29 Jan 2020 16:18:39 +0000 (11:18 -0500)]
Add cmd-nits to travis build
Update CHANGES to have a complete and uniform description.
Fixes #9730
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/10972)
Rich Salz [Wed, 29 Jan 2020 18:21:19 +0000 (13:21 -0500)]
The -hmac option to speed is now #ifdef'd
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/10972)
Rich Salz [Wed, 29 Jan 2020 16:18:24 +0000 (11:18 -0500)]
Add missing s_client options
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/10972)
Davide Galassi [Sat, 25 Jan 2020 11:56:44 +0000 (12:56 +0100)]
Prevent compiler warning for unused static function.
Prepend missing ossl_unused in front of lh_type_new to make the compiler
happy.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Paul Dale <paul.dale@oracle.com> Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10946)
Davide Galassi [Sat, 25 Jan 2020 11:50:41 +0000 (12:50 +0100)]
Removed unused ssl_dane struct declaration.
The actually used structure is named ssl_dane_st.
CLA: trivial
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/10945)
Jakub Jelen [Tue, 14 Jan 2020 15:03:23 +0000 (16:03 +0100)]
doc: Fix typo in EVP_DigestSignInit manpage
CLA: trivial
Signed-off-by: Jakub Jelen <jjelen@redhat.com> Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10841)
thekuwayama [Sat, 11 Jan 2020 11:20:20 +0000 (20:20 +0900)]
Fix small misspelling in doc for OCSP_response_status
CLA: trivial
Reviewed-by: Paul Yang <kaishen.yy@antfin.com> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10810)
Matt Caswell [Tue, 4 Feb 2020 17:11:07 +0000 (17:11 +0000)]
Fix no-tls1_3
The hostname_cb in sslapitest.c was originally only defined if TLSv1.3
was enabled. A recently added test now uses this unconditionally, so we
move the function implementation earlier in the file, and always compile
it in.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11014)
Matt Caswell [Fri, 31 Jan 2020 23:28:45 +0000 (23:28 +0000)]
Fix builds with no-dh
The various functions in bn_const.c return primes that are
specified for use in DH. However they were not being excluded from
a no-dh build - and was therefore causing the build to fail.
Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10990)
Matt Caswell [Wed, 15 Jan 2020 11:20:58 +0000 (11:20 +0000)]
Use the OPENSSL_CTX and property query string in EVP_PKEY_CTX
When we use an EVP_PKEY_CTX in libssl we should be doing so with the
OPENSSL_CTX and property query string that were specified when the
SSL_CTX object was first created.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10854)
Matt Caswell [Thu, 16 Jan 2020 12:14:27 +0000 (12:14 +0000)]
Explicitly fetch ciphers and digests in libssl
We modify libssl to use explicitly fetched ciphers, digests and other
algorithms as required based on the configured library context and
property query string for the SSL_CTX that is being used.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10854)
Ross Kinsey [Wed, 5 Feb 2020 03:47:05 +0000 (13:47 +1000)]
Author: Ross Kinsey <RossIKinsey@gmail.com>
Date: Wed Jan 29 00:19:40 2020 -0500
Removed unnecessary switch statements from bio/bf_* callback_ctrl functions
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Paul Dale <paul.dale@oracle.com> Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10967)
H.J. Lu [Fri, 31 Jan 2020 13:07:01 +0000 (05:07 -0800)]
x86: Add endbranch to indirect branch targets for Intel CET
To support Intel CET, all indirect branch targets must start with
endbranch. Here is a patch to add endbranch to all function entries
in x86 assembly codes which are indirect branch targets as discovered
by running openssl testsuite on Intel CET machine and visual inspection.
Since x86 cbc.pl uses indirect branch with a jump table, we also need
to add endbranch to all jump targets.
Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10984)
Pauli [Tue, 4 Feb 2020 23:09:29 +0000 (09:09 +1000)]
Make minimum size for secure memory a size_t.
The minimum size argument to CRYPTO_secure_malloc_init() was an int but ought
to be a size_t since it is a size.
From an API perspective, this is a change. However, the minimum size is
verified as being a positive power of two and it will typically be a small
constant.
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from #11003)
Richard Levitte [Sun, 2 Feb 2020 12:09:09 +0000 (13:09 +0100)]
PROV: Implement padding mode words in the RSA ASYM_CIPHER implementation
Because the libcrypto code has relinquished control of exact words to
express padding mode choices, we re-implement them in the appropriate
provider implementation.
For the sake of legacy controls, we maintain support for the numeric
form of the padding mode, but leave that support otherwise undeclared.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10947)
Richard Levitte [Sat, 25 Jan 2020 11:27:47 +0000 (12:27 +0100)]
Decentralize legacy_ctrl_str_to_param()
This function did a bit too much in terms of central control, actually
more so than the legacy counterpart, where all the string processing
is done in the diverse *_pmeth.c. Furthermore, there was no room
whatsoever for control keys that libcrypto isn't centrally aware of.
This function is changed to simply translating keys and values to
OSSL_PARAM form and then sent on their merry way to the provider
implementations through EVP_PKEY_CTX_set_params(). It translates
selected well known legacy names to their core name counterpart, and
that's as far as centralized control should extend.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10947)
Matt Caswell [Fri, 17 Jan 2020 17:39:19 +0000 (17:39 +0000)]
Detect EOF while reading in libssl
If we hit an EOF while reading in libssl then we will report an error
back to the application (SSL_ERROR_SYSCALL) but errno will be 0. We add
an error to the stack (which means we instead return SSL_ERROR_SSL) and
therefore give a hint as to what went wrong.
Contains a partial fix for #10880
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/10907)
Richard Levitte [Mon, 3 Feb 2020 15:34:58 +0000 (15:34 +0000)]
Fix krb5 external test failure
The krb5 test requires the legacy module to be loaded in order to work.
It also seems to be senstive to using relative paths, so we use absolute
ones instead.
[extended tests]
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10992)
Davide Galassi [Sun, 2 Feb 2020 09:11:29 +0000 (10:11 +0100)]
Missing "obj_mac" header file in "dh_lib"
Usage of `NID_undef` symbol without including its definition was causing
a build fail
Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10996)
Matt Caswell [Fri, 31 Jan 2020 10:08:33 +0000 (10:08 +0000)]
Don't complain about documented symbols with find-doc-nits -d -o
find-doc-nits can give a list of symbols that were added since 1.1.1 and
are undocumented (using -o). To do this it uses the missingcrypto111.txt
and missingssl111.txt files which give a snapshot of the undocumented
symbols at the time of the 1.1.1 release. Currently it complains about
symbols that are in those files that have subsequently been documented.
This isn't particularly helpful so we suppress that feature when "-o"
is being used.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10981)
Matt Caswell [Thu, 30 Jan 2020 15:30:17 +0000 (15:30 +0000)]
Fix common test framework options
PR#6975 added the ability to our test framework to have common options to
all tests. For example providing the option "-test 5" to one of our test
programs will just run test number 5. This can be useful when debugging
tests.
Unforuntately this does not work well for a number of tests. In particular
those tests that call test_get_argument() without first skipping over these
common test options will not get the expected value. Some tests did this
correctly but a large number did not.
A helper function is introduced, test_skip_common_options(), to make this
easier for those tests which do not have their own specialised test option
handling, but yet still need to call test_get_argument(). This function
call is then added to all those tests that need it.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com> Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10975)
Matt Caswell [Fri, 31 Jan 2020 23:58:53 +0000 (23:58 +0000)]
Fix no-ec
The cmp_protect_test cert chain tests use some EC certs which breaks in
a no-ec build. The fix is to just skip those tests if no-ec has been
configured.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10991)
Reviewed-by: Paul Dale <paul.dale@oracle.com> Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10989)