Revert "hw/block/pflash_cfi: Error out if dev length isn't power of 2"
Commit 334c388f25 ("pflash_cfi: Error out if device length
isn't a power of two") aimed to finish the effort started by
commit 06f1521795 ("pflash: Require backend size to match device,
improve errors"), but unfortunately we are not quite there since
various machines are still ready to accept incomplete / oversized
pflash backend images, and now fail, i.e. on Debian bullseye:
$ qemu-system-x86_64 \
-drive \
if=pflash,format=raw,unit=0,readonly=on,file=/usr/share/OVMF/OVMF_CODE.fd
qemu-system-x86_64: Device size must be a power of two.
where OVMF_CODE.fd comes from the ovmf package, which doesn't
pad the firmware images to the flash size:
$ ls -lh /usr/share/OVMF/
-rw-r--r-- 1 root root 3.5M Aug 19 2021 OVMF_CODE_4M.fd
-rw-r--r-- 1 root root 1.9M Aug 19 2021 OVMF_CODE.fd
-rw-r--r-- 1 root root 128K Aug 19 2021 OVMF_VARS.fd
Si-Wei Liu [Tue, 8 Nov 2022 04:19:28 +0000 (12:19 +0800)]
vhost-vdpa: fix assert !virtio_net_get_subqueue(nc)->async_tx.elem in virtio_net_reset
The citing commit has incorrect code in vhost_vdpa_receive() that returns
zero instead of full packet size to the caller. This renders pending packets
unable to be freed so then get clogged in the tx queue forever. When device
is being reset later on, below assertion failure ensues:
0 0x00007f86d53bb387 in raise () from /lib64/libc.so.6
1 0x00007f86d53bca78 in abort () from /lib64/libc.so.6
2 0x00007f86d53b41a6 in __assert_fail_base () from /lib64/libc.so.6
3 0x00007f86d53b4252 in __assert_fail () from /lib64/libc.so.6
4 0x000055b8f6ff6fcc in virtio_net_reset (vdev=<optimized out>) at /usr/src/debug/qemu/hw/net/virtio-net.c:563
5 0x000055b8f7012fcf in virtio_reset (opaque=0x55b8faf881f0) at /usr/src/debug/qemu/hw/virtio/virtio.c:1993
6 0x000055b8f71f0086 in virtio_bus_reset (bus=bus@entry=0x55b8faf88178) at /usr/src/debug/qemu/hw/virtio/virtio-bus.c:102
7 0x000055b8f71f1620 in virtio_pci_reset (qdev=<optimized out>) at /usr/src/debug/qemu/hw/virtio/virtio-pci.c:1845
8 0x000055b8f6fafc6c in memory_region_write_accessor (mr=<optimized out>, addr=<optimized out>, value=<optimized out>,
size=<optimized out>, shift=<optimized out>, mask=<optimized out>, attrs=...) at /usr/src/debug/qemu/memory.c:483
9 0x000055b8f6fadce9 in access_with_adjusted_size (addr=addr@entry=20, value=value@entry=0x7f867e7fb7e8, size=size@entry=1,
access_size_min=<optimized out>, access_size_max=<optimized out>, access_fn=0x55b8f6fafc20 <memory_region_write_accessor>,
mr=0x55b8faf80a50, attrs=...) at /usr/src/debug/qemu/memory.c:544
10 0x000055b8f6fb1d0b in memory_region_dispatch_write (mr=mr@entry=0x55b8faf80a50, addr=addr@entry=20, data=0, op=<optimized out>,
attrs=attrs@entry=...) at /usr/src/debug/qemu/memory.c:1470
11 0x000055b8f6f62ada in flatview_write_continue (fv=fv@entry=0x7f86ac04cd20, addr=addr@entry=549755813908, attrs=...,
attrs@entry=..., buf=buf@entry=0x7f86d0223028 <Address 0x7f86d0223028 out of bounds>, len=len@entry=1, addr1=20, l=1,
mr=0x55b8faf80a50) at /usr/src/debug/qemu/exec.c:3266
12 0x000055b8f6f62c8f in flatview_write (fv=0x7f86ac04cd20, addr=549755813908, attrs=...,
buf=0x7f86d0223028 <Address 0x7f86d0223028 out of bounds>, len=1) at /usr/src/debug/qemu/exec.c:3306
13 0x000055b8f6f674cb in address_space_write (as=<optimized out>, addr=<optimized out>, attrs=..., buf=<optimized out>,
len=<optimized out>) at /usr/src/debug/qemu/exec.c:3396
14 0x000055b8f6f67575 in address_space_rw (as=<optimized out>, addr=<optimized out>, attrs=..., attrs@entry=...,
buf=buf@entry=0x7f86d0223028 <Address 0x7f86d0223028 out of bounds>, len=<optimized out>, is_write=<optimized out>)
at /usr/src/debug/qemu/exec.c:3406
15 0x000055b8f6fc1cc8 in kvm_cpu_exec (cpu=cpu@entry=0x55b8f9aa0e10) at /usr/src/debug/qemu/accel/kvm/kvm-all.c:2410
16 0x000055b8f6fa5f5e in qemu_kvm_cpu_thread_fn (arg=0x55b8f9aa0e10) at /usr/src/debug/qemu/cpus.c:1318
17 0x000055b8f7336e16 in qemu_thread_start (args=0x55b8f9ac8480) at /usr/src/debug/qemu/util/qemu-thread-posix.c:519
18 0x00007f86d575aea5 in start_thread () from /lib64/libpthread.so.0
19 0x00007f86d5483b2d in clone () from /lib64/libc.so.6
Make vhost_vdpa_receive() return the size passed in as is, so that the
caller qemu_deliver_packet_iov() would eventually propagate it back to
virtio_net_flush_tx() to release pending packets from the async_tx queue.
Which corresponds to the drop path where qemu_sendv_packet_async() returns
non-zero in virtio_net_flush_tx().
Fixes: 846a1e85da64 ("vdpa: Add dummy receive callback") Cc: Eugenio Perez Martin <eperezma@redhat.com> Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221108041929.18417-2-jasowang@redhat.com>
* tag 'mips-20221108' of https://github.com/philmd/qemu:
MAINTAINERS: Inherit from nanoMIPS
disas/nanomips: Tidy read for 48-bit opcodes
disas/nanomips: Split out read_u16
disas/nanomips: Merge insn{1,2,3} into words[3]
disas/nanomips: Move setjmp into nanomips_dis
disas/nanomips: Remove headers already included by "qemu/osdep.h"
disas/nanomips: Use G_GNUC_PRINTF to avoid invalid string formats
disas/nanomips: Fix invalid PRIx64 format calling img_format()
disas/nanomips: Fix invalid PRId64 format calling img_format()
target/mips: Don't check COP1X for 64 bit FP mode
target/mips: Disable DSP ASE for Octeon68XX
target/mips: Enable LBX/LWX/* instructions for Octeon
target/mips: Cast offset field of Octeon BBIT to int16_t
target/mips: Set CP0St_{KX, SX, UX} for Loongson-2F
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
s390x/s390-virtio-ccw: Switch off zPCI enhancements on older machines
zPCI enhancement features (interpretation and forward assist) were
recently introduced to improve performance on PCI passthrough devices.
To maintain the same behaviour on older Z machines, deactivate the
features with the associated properties.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20221107161349.1032730-3-clg@kaod.org> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
The "zpcii-disable" machine property is redundant with the "interpret"
zPCI device property. Remove it for clarification.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20221107161349.1032730-2-clg@kaod.org> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
6 months ago Stefan Pejic stepped in as nanoMIPS maintainer
(see commit a 8e0e23445a "target/mips: Undeprecate nanoMIPS
ISA support in QEMU"), however today his email is bouncing:
** Message blocked **
Your message to stefan.pejic@syrmia.com has been blocked. See technical details below for more information.
The response from the remote server was:
550 5.4.1 Recipient address rejected: Access denied. AS(201806281) [DBAEUR03FT030.eop-EUR03.prod.protection.outlook.com]
To avoid unmaintained code, I feel forced to merge this code
back with the generic MIPS section.
There is no point in looking for a 48-bit opcode if we've
not read the second word for a 32-bit opcode.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221106023735.5277-5-richard.henderson@linaro.org>
Split out a helper function for reading a uint16_t
with the correct endianness.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221106023735.5277-4-richard.henderson@linaro.org>
Since Disassemble wants the data in this format, collect
it that way. This allows using a loop to print the bytes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221106212852.152384-3-richard.henderson@linaro.org>
Reduce the number of local variables within the scope of the
setjmp by moving it to the existing helper. The actual length
returned from Disassemble is not used, because we have already
determined the length while reading bytes. Fixes:
nanomips.c: In function ‘print_insn_nanomips’:
nanomips.c:21925:14: error: variable ‘insn1’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
nanomips.c:21925:25: error: variable ‘insn2’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
nanomips.c:21925:36: error: variable ‘insn3’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
nanomips.c:21926:22: error: variable ‘buf’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221106212852.152384-2-richard.henderson@linaro.org>
disas/nanomips: Remove headers already included by "qemu/osdep.h"
Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221101114458.25756-5-philmd@linaro.org>
disas/nanomips: Use G_GNUC_PRINTF to avoid invalid string formats
Suggested-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221101114458.25756-4-philmd@linaro.org>
disas/nanomips: Fix invalid PRIx64 format calling img_format()
Fix:
disas/nanomips.c:12231:62: warning: format specifies type 'char *' but the argument has type 'uint64' (aka 'unsigned long long') [-Wformat]
return img_format("RESTOREF 0x%" PRIx64 ", %s", u_value, count_value);
~~ ^~~~~~~~~~~
%llu
Fixes: 4066c152b3 ("disas/nanomips: Remove IMMEDIATE functions") Reported-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221101114458.25756-3-philmd@linaro.org>
disas/nanomips: Fix invalid PRId64 format calling img_format()
Fix warnings such:
disas/nanomips.c:3251:64: warning: format specifies type 'char *' but the argument has type 'int64' (aka 'long long') [-Wformat]
return img_format("CACHE 0x%" PRIx64 ", %s(%s)", op_value, s_value, rs);
~~ ^~~~~~~
%lld
To avoid crashes such (kernel from commit f375ad6a0d):
Fixes: 4066c152b3 ("disas/nanomips: Remove IMMEDIATE functions") Reported-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221101114458.25756-2-philmd@linaro.org>
Jiaxun Yang [Mon, 31 Oct 2022 13:25:31 +0000 (13:25 +0000)]
target/mips: Disable DSP ASE for Octeon68XX
I don't have access to Octeon68XX hardware but according
to my investigation Octeon never had DSP ASE support.
As per "Cavium Networks OCTEON Plus CN50XX Hardware Reference
Manual" CP0C3_DSPP is reserved bit and read as 0. Also I do have
access to a Ubiquiti Edgerouter 4 which has Octeon CN7130 processor
and I can confirm CP0C3_DSPP is read as 0 on that processor.
Further more, in linux kernel:
arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
cpu_has_dsp is overridden as 0.
So I believe we shouldn't emulate DSP in QEMU as well.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <20221031132531.18122-4-jiaxun.yang@flygoat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Pavel Dovgalyuk [Tue, 1 Nov 2022 05:29:44 +0000 (08:29 +0300)]
target/mips: Enable LBX/LWX/* instructions for Octeon
This patch changes condition and function name for enabling
indexed load instructions for Octeon vCPUs. Octeons do not
have DSP extension, but implement LBX-and-others.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <166728058455.229236.13834649461181619195.stgit@pasha-ThinkPad-X280> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Jiaxun Yang [Mon, 31 Oct 2022 13:25:30 +0000 (13:25 +0000)]
target/mips: Cast offset field of Octeon BBIT to int16_t
As per "Cavium Networks OCTEON Plus CN50XX Hardware Reference
Manual" offset field is signed 16 bit value. However arg_BBIT.offset
is unsigned. We need to cast it as signed to do address calculation.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221031132531.18122-3-jiaxun.yang@flygoat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Jiaxun Yang [Mon, 31 Oct 2022 13:25:29 +0000 (13:25 +0000)]
target/mips: Set CP0St_{KX, SX, UX} for Loongson-2F
As per an unpublished document, in later reversion of chips
CP0St_{KX, SX, UX} is not writeable and hardcoded to 1.
Without those bits set, kernel is unable to access XKPHYS address
segment. So just set them up on CPU reset.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221031132531.18122-2-jiaxun.yang@flygoat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Stefan Hajnoczi [Mon, 7 Nov 2022 23:43:56 +0000 (18:43 -0500)]
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
pci,pc,virtio: features, tests, fixes, cleanups
lots of acpi rework
first version of biosbits infrastructure
ASID support in vhost-vdpa
core_count2 support in smbios
PCIe DOE emulation
virtio vq reset
HMAT support
part of infrastructure for viommu support in vhost-vdpa
VTD PASID support
fixes, tests all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmNpXDkPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpD0AH/2G8ZPrgrxJC9y3uD5/5J6QRzO+TsDYbg5ut
# uBf4rKSHHzcu6zdyAfsrhbAKKzyD4HrEGNXZrBjnKM1xCiB/SGBcDIWntwrca2+s
# 5Dpbi4xvd4tg6tVD4b47XNDCcn2uUbeI0e2M5QIbtCmzdi/xKbFAfl5G8DQp431X
# Kmz79G4CdKWyjVlM0HoYmdCw/4FxkdjD02tE/Uc5YMrePNaEg5Bw4hjCHbx1b6ur
# 6gjeXAtncm9s4sO0l+sIdyiqlxiTry9FSr35WaQ0qPU+Og5zaf1EiWfdl8TRo4qU
# EAATw5A4hyw11GfOGp7oOVkTGvcNB/H7aIxD7emdWZV8+BMRPKo=
# =zTCn
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 07 Nov 2022 14:27:53 EST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (83 commits)
checkpatch: better pattern for inline comments
hw/virtio: introduce virtio_device_should_start
tests/acpi: update tables for new core count test
bios-tables-test: add test for number of cores > 255
tests/acpi: allow changes for core_count2 test
bios-tables-test: teach test to use smbios 3.0 tables
hw/smbios: add core_count2 to smbios table type 4
vhost-user: Support vhost_dev_start
vhost: Change the sequence of device start
intel-iommu: PASID support
intel-iommu: convert VTD_PE_GET_FPD_ERR() to be a function
intel-iommu: drop VTDBus
intel-iommu: don't warn guest errors when getting rid2pasid entry
vfio: move implement of vfio_get_xlat_addr() to memory.c
tests: virt: Update expected *.acpihmatvirt tables
tests: acpi: aarch64/virt: add a test for hmat nodes with no initiators
hw/arm/virt: Enable HMAT on arm virt machine
tests: Add HMAT AArch64/virt empty table files
tests: acpi: q35: update expected blobs *.hmat-noinitiators expected HMAT:
tests: acpi: q35: add test for hmat nodes without initiators
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Greg Kurz [Fri, 4 Nov 2022 12:00:59 +0000 (13:00 +0100)]
util/log: Ignore per-thread flag if global file already there
If QEMU is started with `-D qemu.log.%d` without any `-d` option,
doing `log all` in the monitor fails with:
Filename template with '%d' required for 'tid'
It is confusing since '%d' was actually passed.
This happens because QEMU caches the log file name with %d converted
to getpid() since `tid` wasn't required. This name isn't suitable
for a subsequent enablement of per-thread logs. There's little cause
to change the behavior as `-d tid` is mostly used at user-only startup.
Drop the per-thread from the requested flags in this case : `log all`
will thus enable everything except `tid` instead of failing. This is
preferable over forcing the user to enable each log item individually.
With this patch, `tid` is now truely immutable : it can only be set
or unset from the command line and never changed afterwards.
Fixes: 4e51069d6793 ("util/log: Support per-thread log files") Cc: richard.henderson@linaro.org Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221104120059.678470-3-groug@kaod.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Greg Kurz [Fri, 4 Nov 2022 12:00:58 +0000 (13:00 +0100)]
util/log: Make the per-thread flag immutable
Per-thread logging was implemented under the assumption that once
enabled, it is not possible to switch back to single file logging.
This isn't enforced though and it is possible to go through the
global file opening sequence in per-thread mode. The code isn't
ready for this and produces unexpected results as detailed below.
Start QEMU in system emulation mode with `-D ./qemu.log.%d -d tid`
and then change the log level from the monitor to something that
doesn't have tid, e.g. `log cpu_reset`. The value of log_flags
is zero and per_thread is set to false : the rest of the code
then assumes it is running in the global log case and opens a
file named `qemu.log.%d`, which is obviously not an expected
behavior.
Enforce the immutability of the flag early in qemu_set_log_internal()
so that its value is correct for all subsequent users.
Fixes: 4e51069d6793 ("util/log: Support per-thread log files") Cc: richard.henderson@linaro.org Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221104120059.678470-2-groug@kaod.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCY2hz5gAKCRBAov/yOSY+
# 31ESA/9ppQVu70y8AnA/aYCzC6koQxxAsaD/lvwc7M1xzeZnjwOsVnsFLpZITTJj
# 2+2O/BlEO3uRvAtV6E7Vtu9D/+Cc+HQ7yOFnwbY0jZmePThp3YYtTg6o+2T7/9ya
# RMicgny1SYjsOjG8/Uam9+dRbH5QheNFwid0BWFhMts9MDB3Mg==
# =zZ8m
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 06 Nov 2022 21:56:38 EST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20221107' of https://gitlab.com/gaosong/qemu:
target/loongarch: Fix return value of CHECK_FPE
target/loongarch: Separate the hardware flags into MMU index and PLV
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
WARNING: Block comments use a leading /* on a separate line
#50: FILE: hw/acpi/nvdimm.c:1074:
+ aml_equal(aml_sizeof(pckg), aml_int(1)) /* 1 element? */));
but there's nothing wrong with it - the check is just too simplistic. It
will also miss lines which mix inline and block comments.
Instead, let's strip all inline comments from a line and then check for block
comments.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Alex Bennée [Mon, 7 Nov 2022 12:14:07 +0000 (12:14 +0000)]
hw/virtio: introduce virtio_device_should_start
The previous fix to virtio_device_started revealed a problem in its
use by both the core and the device code. The core code should be able
to handle the device "starting" while the VM isn't running to handle
the restoration of migration state. To solve this duel use introduce a
new helper for use by the vhost-user backends who all use it to feed a
should_start variable.
We can also pick up a change vhost_user_blk_set_status while we are at
it which follows the same pattern.
Fixes: 9f6bcfd99f (hw/virtio: move vm_running check to virtio_device_started) Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: "Michael S. Tsirkin" <mst@redhat.com>
Message-Id: <20221107121407.1010913-1-alex.bennee@linaro.org>
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20220731162141.178443-6-jusual@redhat.com>
Message-Id: <20221011111731.101412-6-jusual@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Julia Suvorova [Tue, 11 Oct 2022 11:17:30 +0000 (13:17 +0200)]
bios-tables-test: add test for number of cores > 255
The new test is run with a large number of cpus and checks if the
core_count field in smbios_cpu_test (structure type 4) is correct.
Choose q35 as it allows to run with -smp > 255.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20220731162141.178443-5-jusual@redhat.com>
Message-Id: <20221011111731.101412-5-jusual@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Julia Suvorova [Tue, 11 Oct 2022 11:17:29 +0000 (13:17 +0200)]
tests/acpi: allow changes for core_count2 test
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20220731162141.178443-4-jusual@redhat.com>
Message-Id: <20221011111731.101412-4-jusual@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com>
Julia Suvorova [Tue, 11 Oct 2022 11:17:28 +0000 (13:17 +0200)]
bios-tables-test: teach test to use smbios 3.0 tables
Introduce the 64-bit entry point. Since we no longer have a total
number of structures, stop checking for the new ones at the EOF
structure (type 127).
Signed-off-by: Julia Suvorova <jusual@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220731162141.178443-3-jusual@redhat.com>
Message-Id: <20221011111731.101412-3-jusual@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Julia Suvorova [Tue, 11 Oct 2022 11:17:27 +0000 (13:17 +0200)]
hw/smbios: add core_count2 to smbios table type 4
In order to use the increased number of cpus, we need to bring smbios
tables in line with the SMBIOS 3.0 specification. This allows us to
introduce core_count2 which acts as a duplicate of core_count if we have
fewer cores than 256, and contains the actual core number per socket if
we have more.
core_enabled2 and thread_count2 fields work the same way.
Signed-off-by: Julia Suvorova <jusual@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220731162141.178443-2-jusual@redhat.com>
Message-Id: <20221011111731.101412-2-jusual@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Yajun Wu [Mon, 17 Oct 2022 06:44:52 +0000 (14:44 +0800)]
vhost-user: Support vhost_dev_start
The motivation of adding vhost-user vhost_dev_start support is to
improve backend configuration speed and reduce live migration VM
downtime.
Today VQ configuration is issued one by one. For virtio net with
multi-queue support, backend needs to update RSS (Receive side
scaling) on every rx queue enable. Updating RSS is time-consuming
(typical time like 7ms).
Implement already defined vhost status and message in the vhost
specification [1].
(a) VHOST_USER_PROTOCOL_F_STATUS
(b) VHOST_USER_SET_STATUS
(c) VHOST_USER_GET_STATUS
Send message VHOST_USER_SET_STATUS with VIRTIO_CONFIG_S_DRIVER_OK for
device start and reset(0) for device stop.
On reception of the DRIVER_OK message, backend can apply the needed setting
only once (instead of incremental) and also utilize parallelism on enabling
queues.
This improves QEMU's live migration downtime with vhost user backend
implementation by great margin, specially for the large number of VQs of 64
from 800 msec to 250 msec.
Signed-off-by: Yajun Wu <yajunw@nvidia.com> Acked-by: Parav Pandit <parav@nvidia.com>
Message-Id: <20221017064452.1226514-3-yajunw@nvidia.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Yajun Wu [Mon, 17 Oct 2022 06:44:51 +0000 (14:44 +0800)]
vhost: Change the sequence of device start
This patch is part of adding vhost-user vhost_dev_start support. The
motivation is to improve backend configuration speed and reduce live
migration VM downtime.
Moving the device start routines after finishing all the necessary device
and VQ configuration, further aligning to the virtio specification for
"device initialization sequence".
Following patch will add vhost-user vhost_dev_start support.
Signed-off-by: Yajun Wu <yajunw@nvidia.com> Acked-by: Parav Pandit <parav@nvidia.com>
Message-Id: <20221017064452.1226514-2-yajunw@nvidia.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Fri, 28 Oct 2022 06:14:36 +0000 (14:14 +0800)]
intel-iommu: PASID support
This patch introduce ECAP_PASID via "x-pasid-mode". Based on the
existing support for scalable mode, we need to implement the following
missing parts:
1) tag VTDAddressSpace with PASID and support IOMMU/DMA translation
with PASID
2) tag IOTLB with PASID
3) PASID cache and its flush
4) PASID based IOTLB invalidation
For simplicity PASID cache is not implemented so we can simply
implement the PASID cache flush as a no and leave it to be implemented
in the future. For PASID based IOTLB invalidation, since we haven't
had L1 stage support, the PASID based IOTLB invalidation is not
implemented yet. For PASID based device IOTLB invalidation, it
requires the support for vhost so we forbid enabling device IOTLB when
PASID is enabled now. Those work could be done in the future.
Note that though PASID based IOMMU translation is ready but no device
can issue PASID DMA right now. In this case, PCI_NO_PASID is used as
PASID to identify the address without PASID. vtd_find_add_as() has
been extended to provision address space with PASID which could be
utilized by the future extension of PCI core to allow device model to
use PASID based DMA translation.
This feature would be useful for:
1) prototyping PASID support for devices like virtio
2) future vPASID work
3) future PRS and vSVA work
Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221028061436.30093-5-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Fri, 28 Oct 2022 06:14:35 +0000 (14:14 +0800)]
intel-iommu: convert VTD_PE_GET_FPD_ERR() to be a function
We used to have a macro for VTD_PE_GET_FPD_ERR() but it has an
internal goto which prevents it from being reused. This patch convert
that macro to a dedicated function and let the caller to decide what
to do (e.g using goto or not). This makes sure it can be re-used for
other function that requires fault reporting.
Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221028061436.30093-4-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Jason Wang [Fri, 28 Oct 2022 06:14:34 +0000 (14:14 +0800)]
intel-iommu: drop VTDBus
We introduce VTDBus structure as an intermediate step for searching
the address space. This works well with SID based matching/lookup. But
when we want to support SID plus PASID based address space lookup,
this intermediate steps turns out to be a burden. So the patch simply
drops the VTDBus structure and use the PCIBus and devfn as the key for
the g_hash_table(). This simplifies the codes and the future PASID
extension.
To prevent being slower for past vtd_find_as_from_bus_num() callers, a
vtd_as cache indexed by the bus number is introduced to store the last
recent search result of a vtd_as belongs to a specific bus.
Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221028061436.30093-3-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Jason Wang [Fri, 28 Oct 2022 06:14:33 +0000 (14:14 +0800)]
intel-iommu: don't warn guest errors when getting rid2pasid entry
We use to warn on wrong rid2pasid entry. But this error could be
triggered by the guest and could happens during initialization. So
let's don't warn in this case.
Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221028061436.30093-2-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Cindy Lu [Mon, 31 Oct 2022 03:10:19 +0000 (11:10 +0800)]
vfio: move implement of vfio_get_xlat_addr() to memory.c
- Move the implement vfio_get_xlat_addr to softmmu/memory.c, and
change the name to memory_get_xlat_addr(). So we can use this
function on other devices, such as vDPA device.
- Add a new function vfio_get_xlat_addr in vfio/common.c, and it will check
whether the memory is backed by a discard manager. then device can
have its own warning.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221031031020.1405111-2-lulu@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com>
Message-Id: <20221027100037.251-9-hesham.almatary@huawei.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Hesham Almatary [Thu, 27 Oct 2022 10:00:36 +0000 (11:00 +0100)]
tests: acpi: aarch64/virt: add a test for hmat nodes with no initiators
This patch imitates the "tests: acpi: q35: add test for hmat nodes
without initiators" commit to test numa nodes with different HMAT
attributes, but on AArch64/virt.
Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com>
Message-Id: <20221027100037.251-8-hesham.almatary@huawei.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xiang Chen [Thu, 27 Oct 2022 10:00:35 +0000 (11:00 +0100)]
hw/arm/virt: Enable HMAT on arm virt machine
Since the patchset ("Build ACPI Heterogeneous Memory Attribute Table (HMAT)"),
HMAT is supported, but only x86 is enabled. Enable HMAT on arm virt machine.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221027100037.251-7-hesham.almatary@huawei.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Hesham Almatary [Thu, 27 Oct 2022 10:00:34 +0000 (11:00 +0100)]
tests: Add HMAT AArch64/virt empty table files
Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com>
Message-Id: <20221027100037.251-6-hesham.almatary@huawei.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com>
Message-Id: <20221027100037.251-5-hesham.almatary@huawei.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com>
Message-Id: <20221027100037.251-4-hesham.almatary@huawei.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Brice Goglin [Thu, 27 Oct 2022 10:00:31 +0000 (11:00 +0100)]
tests: acpi: add and whitelist *.hmat-noinitiator expected blobs
.. which will be used by follow up hmat-noinitiator test-case.
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com>
Message-Id: <20221027100037.251-3-hesham.almatary@huawei.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Brice Goglin [Thu, 27 Oct 2022 10:00:30 +0000 (11:00 +0100)]
hmat acpi: Don't require initiator value in -numa
The "Memory Proximity Domain Attributes" structure of the ACPI HMAT
has a "Processor Proximity Domain Valid" flag that is currently
always set because Qemu -numa requires an initiator=X value
when hmat=on. Unsetting this flag allows to create more complex
memory topologies by having multiple best initiators for a single
memory target.
This patch allows -numa without initiator=X when hmat=on by keeping
the default value MAX_NODES in numa_state->nodes[i].initiator.
All places reading numa_state->nodes[i].initiator already check
whether it's different from MAX_NODES before using it.
Tested with
qemu-system-x86_64 -accel kvm \
-machine pc,hmat=on \
-drive if=pflash,format=raw,file=./OVMF.fd \
-drive media=disk,format=qcow2,file=efi.qcow2 \
-smp 4 \
-m 3G \
-object memory-backend-ram,size=1G,id=ram0 \
-object memory-backend-ram,size=1G,id=ram1 \
-object memory-backend-ram,size=1G,id=ram2 \
-numa node,nodeid=0,memdev=ram0,cpus=0-1 \
-numa node,nodeid=1,memdev=ram1,cpus=2-3 \
-numa node,nodeid=2,memdev=ram2 \
-numa hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-latency,latency=10 \
-numa hmat-lb,initiator=0,target=0,hierarchy=memory,data-type=access-bandwidth,bandwidth=10485760 \
-numa hmat-lb,initiator=0,target=1,hierarchy=memory,data-type=access-latency,latency=20 \
-numa hmat-lb,initiator=0,target=1,hierarchy=memory,data-type=access-bandwidth,bandwidth=5242880 \
-numa hmat-lb,initiator=0,target=2,hierarchy=memory,data-type=access-latency,latency=30 \
-numa hmat-lb,initiator=0,target=2,hierarchy=memory,data-type=access-bandwidth,bandwidth=1048576 \
-numa hmat-lb,initiator=1,target=0,hierarchy=memory,data-type=access-latency,latency=20 \
-numa hmat-lb,initiator=1,target=0,hierarchy=memory,data-type=access-bandwidth,bandwidth=5242880 \
-numa hmat-lb,initiator=1,target=1,hierarchy=memory,data-type=access-latency,latency=10 \
-numa hmat-lb,initiator=1,target=1,hierarchy=memory,data-type=access-bandwidth,bandwidth=10485760 \
-numa hmat-lb,initiator=1,target=2,hierarchy=memory,data-type=access-latency,latency=30 \
-numa hmat-lb,initiator=1,target=2,hierarchy=memory,data-type=access-bandwidth,bandwidth=1048576
which reports NUMA node2 at same distance from both node0 and node1 as seen in lstopo:
Machine (2966MB total) + Package P#0
NUMANode P#2 (979MB)
Group0
NUMANode P#0 (980MB)
Core P#0 + PU P#0
Core P#1 + PU P#1
Group0
NUMANode P#1 (1007MB)
Core P#2 + PU P#2
Core P#3 + PU P#3
Before this patch, we had to add ",initiator=X" to "-numa node,nodeid=2,memdev=ram2".
The lstopo output difference between initiator=1 and no initiator is:
@@ -1,10 +1,10 @@
Machine (2966MB total) + Package P#0
+ NUMANode P#2 (979MB)
Group0
NUMANode P#0 (980MB)
Core P#0 + PU P#0
Core P#1 + PU P#1
Group0
NUMANode P#1 (1007MB)
- NUMANode P#2 (979MB)
Core P#2 + PU P#2
Core P#3 + PU P#3
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com> Reviewed-by: Jingqi Liu <jingqi.liu@intel.com>
Message-Id: <20221027100037.251-2-hesham.almatary@huawei.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Bernhard Beschow [Fri, 28 Oct 2022 10:34:19 +0000 (12:34 +0200)]
hw/i386/acpi-build: Resolve north rather than south bridges
The code currently assumes Q35 iff ICH9 and i440fx iff PIIX. Now that more
AML generation has been moved into the south bridges and since the
machines define themselves primarily through their north bridges, let's
switch to resolving the north bridges for AML generation instead. This
also allows for easier experimentation with different south bridges in
the "pc" machine, e.g. with PIIX4 and VT82xx.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221028103419.93398-4-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Bernhard Beschow [Fri, 28 Oct 2022 10:34:18 +0000 (12:34 +0200)]
hw/i386/acpi-build: Resolve redundant attribute
The is_piix4 attribute is set once in one location and read once in
another. Doing both in one location allows for removing the attribute
altogether.
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221026133110.91828-3-shentey@gmail.com>
Message-Id: <20221028103419.93398-3-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221026133110.91828-2-shentey@gmail.com>
Message-Id: <20221028103419.93398-2-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gregory Price [Wed, 26 Oct 2022 20:59:13 +0000 (16:59 -0400)]
hw/i386/pc.c: CXL Fixed Memory Window should not reserve e820 in bios
Early-boot e820 records will be inserted by the bios/efi/early boot
software and be reported to the kernel via insert_resource. Later, when
CXL drivers iterate through the regions again, they will insert another
resource and make the RESERVED memory area a child.
This RESERVED memory area causes the memory region to become unusable,
and as a result attempting to create memory regions with
`cxl create-region ...`
Will fail due to the RESERVED area intersecting with the CXL window.
During boot the following traceback is observed:
0xffffffff81101650 in insert_resource_expand_to_fit ()
0xffffffff83d964c5 in e820__reserve_resources_late ()
0xffffffff83e03210 in pcibios_resource_survey ()
0xffffffff83e04f4a in pcibios_init ()
Which produces a call to reserve the CFMWS area:
(gdb) p *new
$54 = {start = 0x290000000, end = 0x2cfffffff, name = "Reserved",
flags = 0x200, desc = 0x7, parent = 0x0, sibling = 0x0,
child = 0x0}
Later the Kernel parses ACPI tables and reserves the exact same area as
the CXL Fixed Memory Window:
0xffffffff811016a4 in insert_resource_conflict ()
insert_resource ()
0xffffffff81a81389 in cxl_parse_cfmws ()
0xffffffff818c4a81 in call_handler ()
acpi_parse_entries_array ()
This reserved area causes `get_free_mem_region()` to fail due to a check
against `__region_intersects()`. Due to this reserved area, the
intersect check will only ever return REGION_INTERSECTS, which causes
`cxl create-region` to always fail.
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Message-Id: <20221026205912.8579-1-gregory.price@memverge.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Akihiko Odaki [Mon, 29 Aug 2022 08:35:24 +0000 (17:35 +0900)]
msix: Assert that specified vector is in range
There were several different ways to deal with the situation where the
vector specified for a msix function is out of bound:
- early return a function and keep progresssing
- propagate the error to the caller
- mark msix unusable
- assert it is in bound
- just ignore
An out-of-bound vector should not be specified if the device
implementation is correct so let msix functions always assert that the
specified vector is in range.
An exceptional case is virtio-pci, which allows the guest to configure
vectors. For virtio-pci, it is more appropriate to introduce its own
checks because it is sometimes too late to check the vector range in
msix functions.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20220829083524.143640-1-akihiko.odaki@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com> Signed-off-by: Akihiko Odaki <<a href="mailto:akihiko.odaki@daynix.com" target="_blank">akihiko.odaki@daynix.com</a>><br>
MAINTAINERS: Add qapi/virtio.json to section "virtio"
Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221020120458.80709-1-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
- Fix memset argument order: The second argument is
the value, the length goes last.
- Fix an integer overflow reported by Alexander Bulekov.
Both issues allow the guest to overrun the host buffer
allocated for the ERST memory device.
Cc: Eric DeVolder <eric.devolder@oracle.com Cc: Alexander Bulekov <alxndr@bu.edu> Cc: qemu-stable@nongnu.org Fixes: f7e26ffa590 ("ACPI ERST: support for ACPI ERST feature") Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Message-Id: <20221024154233.1043347-1-lk@c--e.de> Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1268 Reviewed-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 17 Oct 2022 10:21:45 +0000 (12:21 +0200)]
acpi: pc/35: sanitize _GPE declaration order
Move _GPE block declaration before it gets referenced by other
hotplug handlers. While at it move PCI hotplug (_E01) handler
after PCI tree description to avoid forward reference to
to not yet declared methods/devices.
PS:
Forward 'usage' usualy is fine as long as it's hidden within
method, however 'iasl' may print warnings. So be nice
to iasl/guest OS and do things in proper order.
PS2: Also follow up patches will move some of hotplug code
from PCI tree to _E01 and that also requires PCI Device
nodes build first, before Scope can reuse that from
global context.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-11-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 17 Oct 2022 10:21:44 +0000 (12:21 +0200)]
tests: acpi: pc/q35 whitelist DSDT before \_GPE cleanup
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-10-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Also for ipmismbus test, child 'Device (MI1)' of SMB0 will be moved along with it
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-9-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 17 Oct 2022 10:21:42 +0000 (12:21 +0200)]
acpi: enumerate SMB bridge automatically along with other PCI devices
to make that happen (bridge sits at _ADR: 0x001F0003),
relax PCI enumeration logic to include devices with *function* > 0
if device has something to say about itself (i.e. has build_dev_aml
callback set).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-8-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 17 Oct 2022 10:21:41 +0000 (12:21 +0200)]
acpi: add get_dev_aml_func() helper
It will be used in followup commits to figure out if
device has it's own, device specific AML block.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-7-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Ani Sinha <ani@anisinha.ca>
Igor Mammedov [Mon, 17 Oct 2022 10:21:40 +0000 (12:21 +0200)]
tests: acpi: whitelist DSDT before generating ICH9_SMB AML automatically
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-6-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- Field (PCI0.ISA.PIRQ, ByteAcc, NoLock, Preserve)
+ Field (SF8.PIRQ, ByteAcc, NoLock, Preserve)
and bridge address
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-5-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 17 Oct 2022 10:21:38 +0000 (12:21 +0200)]
acpi: pc/q35: drop ad-hoc PCI-ISA bridge AML routines and let bus ennumeration generate AML
PCI-ISA bridges that are built in PIIX/Q35 are building its own AML
using AcpiDevAmlIf interface. Now build_append_pci_bus_devices()
gained AcpiDevAmlIf interface support to get AML of devices atached
to PCI slots.
So drop ad-hoc build_q35_isa_bridge()/build_piix4_isa_bridge()
and let PCI bus enumeration to include PCI-ISA bridge AML
when it's enumerated by build_append_pci_bus_devices().
AML change is mostly contextual, which moves whole ISA hierarchy
directly under PCI host bridge instead of it being described
as separate \SB.PCI0.ISA block.
Note:
If bus/slot that hosts ISA bridge has BSEL set, it will gain new
ASUN and _DMS entries (i.e. acpi-index support, but it should not
cause any functional change and that is fine from PCI Firmware
spec point of view), potentially it's possible to suppress that
by adding a flag to PCIDevice but I don't see a reason to do that
yet, I'd rather treat bridge just as any other PCI device if it's
possible.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-4-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 17 Oct 2022 10:21:37 +0000 (12:21 +0200)]
tests: acpi: whitelist DSDT before generating PCI-ISA bridge AML automatically
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 17 Oct 2022 10:21:36 +0000 (12:21 +0200)]
acpi: pc: vga: use AcpiDevAmlIf interface to build VGA device descriptors
NB:
We do not expect any functional change in any ACPI tables with this
change. It's only a refactoring.
NB2:
Some targets (or1k) do not support acpi and CONFIG_ACPI is off for them.
However, modules are reused between all architectures so CONFIG_ACPI is
on. For those architectures, dummy stub function definitions help to
resolve symbols. This change uses more of these and so it adds a couple
of dummy stub definitions so that symbols for those can be resolved.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-2-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Ani Sinha <ani@anisinha.ca> CC: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221107152744.868434-1-ani@anisinha.ca>
Yajun Wu [Tue, 18 Oct 2022 02:36:51 +0000 (10:36 +0800)]
vhost-user: Fix out of order vring host notification handling
vhost backend sends host notification for every VQ. If backend creates
VQs in parallel, the VHOST_USER_SLAVE_VRING_HOST_NOTIFIER_MSG may
arrive to QEMU in different order than incremental queue index order.
For example VQ 1's message arrive earlier than VQ 0's:
After alloc VhostUserHostNotifier for VQ 1. GPtrArray becomes
[ nil, VQ1 pointer ]
After alloc VhostUserHostNotifier for VQ 0. GPtrArray becomes
[ VQ0 pointer, nil, VQ1 pointer ]
This is wrong. fetch_notifier will return NULL for VQ 1 in
vhost_user_get_vring_base, causes host notifier miss removal(leak).
The fix is to remove current element from GPtrArray, make the right
position for element to insert.
Fixes: 503e355465 ("virtio/vhost-user: dynamically assign VhostUserHostNotifiers") Signed-off-by: Yajun Wu <yajunw@nvidia.com> Acked-by: Parav Pandit <parav@nvidia.com>
Message-Id: <20221018023651.1359420-1-yajunw@nvidia.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
David Daney [Fri, 14 Oct 2022 16:09:47 +0000 (18:09 +0200)]
virtio-rng-pci: Allow setting nvectors, so we can use MSI-X
Most other virtio-pci devices allow MSI-X, let's have it for rng too.
Signed-off-by: David Daney <david.daney@fungible.com> Reviewed-by: Marcin Nowakowski <marcin.nowakowski@fungible.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@fungible.com>
Message-Id: <20221014160947.66105-1-philmd@fungible.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xuan Zhuo [Mon, 17 Oct 2022 09:25:58 +0000 (17:25 +0800)]
virtio-net: enable vq reset feature
Add virtqueue reset feature for virtio-net
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20221017092558.111082-16-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Kangjie Xu [Mon, 17 Oct 2022 09:25:57 +0000 (17:25 +0800)]
vhost: vhost-kernel: enable vq reset feature
Add virtqueue reset feature for vhost-kernel.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-15-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Kangjie Xu [Mon, 17 Oct 2022 09:25:56 +0000 (17:25 +0800)]
virtio-net: support queue_enable
Support queue_enable in vhost-kernel scenario. It can be called when
a vq reset operation has been performed and the vq is restared.
It should be noted that we can restart the vq when the vhost has
already started. When launching a new vhost device, the vhost is not
started and all vqs are not initalized until VIRTIO_PCI_COMMON_STATUS
is written. Thus, we should use vhost_started to differentiate the
two cases: vq reset and device start.
Currently it only supports vhost-kernel.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-14-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xuan Zhuo [Mon, 17 Oct 2022 09:25:55 +0000 (17:25 +0800)]
virtio-net: support queue reset
virtio-net and vhost-kernel implement queue reset.
Queued packets in the corresponding queue pair are flushed
or purged.
For virtio-net, userspace datapath will be disabled later in
__virtio_queue_reset(). It will set addr of vring to 0 and idx to 0.
Thus, virtio_net_receive() and virtio_net_flush_tx() will not receive
or send packets.
For vhost-net, the datapath will be disabled in vhost_net_virtqueue_reset().
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-13-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the fucntion flush_or_purge_queued_packets(), it will be
used in device reset and virtqueue reset. Therefore, we extract the
common logic as a new function.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-12-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce vhost_net_virtqueue_restart(), which can restart the
specific virtqueue when the vhost net started running before.
If it fails to restart the virtqueue, the device will be stopped.
Here we do not reuse vhost_net_start_one() or vhost_dev_start()
because they work at queue pair level. The mem table and features
do not change, so we can call the vhost_virtqueue_start() to
restart a specific queue.
This patch only considers the case of vhost-kernel, when
NetClientDriver is NET_CLIENT_DRIVER_TAP.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-11-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce vhost_virtqueue_reset(), which can reset the specific
virtqueue in the device. Then it will unmap vrings and the desc
of the virtqueue.
Here we do not reuse the vhost_net_stop_one() or vhost_dev_stop(),
because they work at queue pair level. We do not use
vhost_virtqueue_stop() because it may stop the device in the
backend.
This patch only considers the case of vhost-kernel, when
NetClientDriver is NET_CLIENT_DRIVER_TAP.
Furthermore, we do not need net->nc->info->poll() because
it enables userspace datapath and we want to stop all
datapaths for this reset virtqueue here.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-10-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Kangjie Xu [Mon, 17 Oct 2022 09:25:51 +0000 (17:25 +0800)]
vhost: expose vhost_virtqueue_stop()
Expose vhost_virtqueue_stop(), we need to use it when resetting a
virtqueue.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-9-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Kangjie Xu [Mon, 17 Oct 2022 09:25:50 +0000 (17:25 +0800)]
vhost: expose vhost_virtqueue_start()
Expose vhost_virtqueue_start(), we need to use it when restarting a
virtqueue.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-8-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Kangjie Xu [Mon, 17 Oct 2022 09:25:49 +0000 (17:25 +0800)]
virtio-pci: support queue enable
PCI devices support device specific vq enable.
Based on this function, the driver can re-enable the virtqueue after the
virtqueue is reset.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-7-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xuan Zhuo [Mon, 17 Oct 2022 09:25:48 +0000 (17:25 +0800)]
virtio-pci: support queue reset
PCI devices support vq reset.
Based on this function, the driver can adjust the size of the ring, and
quickly recycle the buffer in the ring.
The migration of the virtio devices will not happen during a reset
operation. This is becuase the global iothread lock is held. Migration
thread also needs the lock. As a result, when migration of virtio
devices starts, the 'reset' status of VirtIOPCIQueue will always be 0.
Thus, we do not need to add it in vmstate_virtio_pci_modern_queue_state.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-6-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Kangjie Xu [Mon, 17 Oct 2022 09:25:47 +0000 (17:25 +0800)]
virtio: core: vq reset feature negotation support
A a new command line parameter "queue_reset" is added.
Meanwhile, the vq reset feature is disabled for pre-7.2 machines.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-5-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Kangjie Xu [Mon, 17 Oct 2022 09:25:46 +0000 (17:25 +0800)]
virtio: introduce virtio_queue_enable()
Introduce the interface queue_enable() in VirtioDeviceClass and the
fucntion virtio_queue_enable() in virtio, it can be called when
VIRTIO_PCI_COMMON_Q_ENABLE is written and related virtqueue can be
started. It only supports the devices of virtio 1 or later. The
not-supported devices can only start the virtqueue when DRIVER_OK.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-4-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xuan Zhuo [Mon, 17 Oct 2022 09:25:45 +0000 (17:25 +0800)]
virtio: introduce virtio_queue_reset()
Introduce a new interface function virtio_queue_reset() to implement
reset for vq.
Add a new callback to VirtioDeviceClass for queue reset operation for
each child device.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-3-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xuan Zhuo [Mon, 17 Oct 2022 09:25:44 +0000 (17:25 +0800)]
virtio: introduce __virtio_queue_reset()
Separate the logic of vq reset. This logic will be called directly
later.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-2-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Eric Auger [Wed, 12 Oct 2022 16:34:48 +0000 (12:34 -0400)]
hw/virtio/virtio-iommu-pci: Enforce the device is plugged on the root bus
In theory the virtio-iommu-pci could be plugged anywhere in the PCIe
topology and as long as the dt/acpi info are properly built this should
work. However at the moment we fail to do that because the
virtio-iommu-pci BDF is not computed at plug time and in that case
vms->virtio_iommu_bdf gets an incorrect value.
For instance if the virtio-iommu-pci is plugged onto a pcie root port
and the virtio-iommu protects a virtio-block-pci device the guest does
not boot.
So let's do not pretend we do support this case and fail the initialize()
if we detect the virtio-iommu-pci is plugged anywhere else than on the
root bus. Anyway this ability is not needed.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221012163448.121368-1-eric.auger@redhat.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jonathan Cameron [Fri, 14 Oct 2022 15:10:45 +0000 (16:10 +0100)]
hw/pci-bridge/cxl-upstream: Add a CDAT table access DOE
This Data Object Exchange Mailbox allows software to query the
latency and bandwidth between ports on the switch. For now
only provide information on routes between the upstream port and
each downstream port (not p2p).
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
--
Changes since v8: Mostly to match the type 3 equivalent
- Move enum out of function and give it a more descriptive namespace.
Message-Id: <20221014151045.24781-6-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Huai-Cheng Kuo [Fri, 14 Oct 2022 15:10:44 +0000 (16:10 +0100)]
hw/mem/cxl-type3: Add CXL CDAT Data Object Exchange
The CDAT can be specified in two ways. One is to add ",cdat=<filename>"
in "-device cxl-type3"'s command option. The file is required to provide
the whole CDAT table in binary mode. The other is to use the default
that provides some 'reasonable' numbers based on type of memory and
size.
The DOE capability supporting CDAT is added to hw/mem/cxl_type3.c with
capability offset 0x190. The config read/write to this capability range
can be generated in the OS to request the CDAT data.
Signed-off-by: Huai-Cheng Kuo <hchkuo@avery-design.com.tw> Signed-off-by: Chris Browy <cbrowy@avery-design.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20221014151045.24781-5-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Huai-Cheng Kuo [Fri, 14 Oct 2022 15:10:43 +0000 (16:10 +0100)]
hw/cxl/cdat: CXL CDAT Data Object Exchange implementation
The Data Object Exchange implementation of CXL Coherent Device Attribute
Table (CDAT). This implementation is referring to "Coherent Device
Attribute Table Specification, Rev. 1.03, July. 2022" and "Compute
Express Link Specification, Rev. 3.0, July. 2022"
This patch adds core support that will be shared by both
end-points and switch port emulation.
Signed-off-by: Huai-Cheng Kuo <hchkuo@avery-design.com.tw> Signed-off-by: Chris Browy <cbrowy@avery-design.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20221014151045.24781-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jonathan Cameron [Fri, 14 Oct 2022 15:10:42 +0000 (16:10 +0100)]
hw/mem/cxl-type3: Add MSIX support
This will be used by several upcoming patch sets so break it out
such that it doesn't matter which one lands first.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20221014151045.24781-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Huai-Cheng Kuo [Fri, 14 Oct 2022 15:10:41 +0000 (16:10 +0100)]
hw/pci: PCIe Data Object Exchange emulation
Emulation of PCIe Data Object Exchange (DOE)
PCIE Base Specification r6.0 6.3 Data Object Exchange
Supports multiple DOE PCIe Extended Capabilities for a single PCIe
device. For each capability, a static array of DOEProtocol should be passed
to pcie_doe_init(). The protocols in that array will be registered under
the DOE capability structure. For each protocol, vendor ID, type, and
corresponding callback function (handle_request()) should be implemented.
This callback function represents how the DOE request for corresponding
protocol will be handled.
pcie_doe_{read/write}_config() must be appended to corresponding PCI
device's config_read/write() handler to enable DOE access. In
pcie_doe_read_config(), false will be returned if pci_config_read()
offset is not within DOE capability range. In pcie_doe_write_config(),
the function will have no affect if the address is not within the related
DOE PCIE extended capability.
Signed-off-by: Huai-Cheng Kuo <hchkuo@avery-design.com.tw> Signed-off-by: Chris Browy <cbrowy@avery-design.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20221014151045.24781-2-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miguel Luis <miguel.luis@oracle.com>
Message-Id: <20221011181730.10885-5-miguel.luis@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Ani Sinha <ani@anisinha.ca>
Miguel Luis [Tue, 11 Oct 2022 18:17:29 +0000 (18:17 +0000)]
acpi: arm/virt: madt: bump to revision 4 accordingly to ACPI 6.0 Errata A
MADT has been updated with the GIC Structures from ACPI 6.0 Errata A
and so MADT revision and GICC Structure must be updated also.
Fixes: 37f33084ed2e ("acpi: arm/virt: madt: use build_append_int_noprefix() API to compose MADT table") Signed-off-by: Miguel Luis <miguel.luis@oracle.com> Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221011181730.10885-4-miguel.luis@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Miguel Luis [Tue, 11 Oct 2022 18:17:28 +0000 (18:17 +0000)]
acpi: fadt: support revision 6.0 of the ACPI specification
Update the Fixed ACPI Description Table (FADT) to revision 6.0 of the ACPI
specification adding the field "Hypervisor Vendor Identity".
This field's description states the following: "64-bit identifier of hypervisor
vendor. All bytes in this field are considered part of the vendor identity.
These identifiers are defined independently by the vendors themselves,
usually following the name of the hypervisor product. Version information
should NOT be included in this field - this shall simply denote the vendor's
name or identifier. Version information can be communicated through a
supplemental vendor-specific hypervisor API. Firmware implementers would
place zero bytes into this field, denoting that no hypervisor is present in
the actual firmware."
Signed-off-by: Miguel Luis <miguel.luis@oracle.com> Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221011181730.10885-3-miguel.luis@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Miguel Luis [Tue, 11 Oct 2022 18:17:27 +0000 (18:17 +0000)]
tests/acpi: virt: allow acpi MADT and FADT changes
Step 3 from bios-tables-test.c documented procedure.
Signed-off-by: Miguel Luis <miguel.luis@oracle.com>
Message-Id: <20221011181730.10885-2-miguel.luis@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Ani Sinha <ani@anisinha.ca>
* tag 'pull-request-2022-11-06' of https://gitlab.com/thuth/qemu:
s390x/cpu topology: add max_threads machine class attribute
s390x: Register TYPE_S390_CCW_MACHINE properties as class properties
s390x/pci: RPCIT second pass when mappings exhausted
s390x/css: revert SCSW ctrl/flag bits on error
gitlab-ci: increase clang-user timeout
tests/qtest: migration-test: Enable TLS PSK tests for win32
tests/qtest: Fix two format strings
tests/qtest/libqos/e1000e: Use IVAR shift definitions
tests/qtest/libqos/e1000e: Use E1000_STATUS_ASDV_1000
tests/qtest/e1000e-test: Use e1000_regs.h
tests/qtest/libqos/e1000e: Set E1000_CTRL_SLU
tests/qtest/libqos/e1000e: Refer common PCI ID definitions
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
accel: abort if we fail to load the accelerator plugin
dmg: warn when opening dmg images containing blocks of unknown type
module: add Error arguments to module_load and module_load_qom
module: rename module_load_one to module_load
module: removed unused function argument "mayfail"
Add missing include statement for global xml_builtin
meson: avoid unused arguments of main() in compiler tests
Fix broken configure with -Wunused-parameter
gdb-xml: Fix size of EFER register on i386 architecture when debugged by GDB
util/aio-win32: Correct the event array size in aio_poll()
util/main-loop: Avoid adding the same HANDLE twice
util/main-loop: Fix maximum number of wait objects for win32
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* tag 'trivial-branch-for-7.2-pull-request' of https://gitlab.com/laurent_vivier/qemu:
tests/unit: simpler variable sequence for test-io-channel
target/tricore: Rename csfr.def -> csfr.h.inc
target/s390x: Rename insn-data/format.def -> insn-data/format.h.inc
target/m68k: Rename qregs.def -> qregs.h.inc
xen/pt: fix syntax error that causes FTBFS in some configurations
Fix some typos in documentation and comments
qapi: virtio: Fix the introduced version
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
projects / thirdparty / qemu.git / log
