]>
Commit | Line | Data |
---|---|---|
1 | Bugfixes: | |
2 | * Re-enable "fsck -l" when it is ready: | |
3 | https://bugs.freedesktop.org/show_bug.cgi?id=79576#c5 | |
4 | ||
5 | * Should systemctl status \* work on all unit types, not just .service? | |
6 | ||
7 | * Dangling symlinks of .automount unit files in .wants/ directories, set up | |
8 | automount points even when the original .automount file did not exist | |
9 | anymore. Only the .mount unit was still around. | |
10 | ||
11 | * properly handle .mount unit state tracking when two mount points are stacked one on top of another on the exact same mount point. | |
12 | ||
13 | External: | |
14 | * Fedora: when installing fedora with yum --installroot /var/run is a directory, not a symlink | |
15 | https://bugzilla.redhat.com/show_bug.cgi?id=975864 | |
16 | ||
17 | * Fedora: add an rpmlint check that verifies that all unit files in the RPM are listed in %systemd_post macros. | |
18 | ||
19 | * Fedora: post FPC ticket to move add %tmpfiles_create to the packaging guidelines | |
20 | ||
21 | * Fedora: move kernel image to /usr/lib/modules/, kernel-install will take care of populating /boot | |
22 | ||
23 | * Fedora: remove /etc/resolv.conf tmpfiles hack | |
24 | ||
25 | Features: | |
26 | ||
27 | * journald: allows specification of UID range for splitting up journal files | |
28 | ||
29 | * systemd.show_status= should probably have a mode where only failed | |
30 | units are shown. | |
31 | ||
32 | * sd-event: - make it possible to embedd our event loop into foreign | |
33 | event loops by passing out the epoll fd and providing three functions | |
34 | that fit into GSource nicely. | |
35 | ||
36 | * networkd: | |
37 | - add LLDP support | |
38 | - ipv4ll with multiple interfaces doesn't work when both dhcp and | |
39 | ipv4ll is used. for some reasons the kernel will currently pick an | |
40 | ipv4ll source address to reach non-ipv4ll gateways. | |
41 | - dhcp and ipv4ll should probably be skipped for "lo" devices, even | |
42 | if the user has a catchall .network file installed, that might | |
43 | theoretically match it. | |
44 | - we probably should introduce a new operational state that | |
45 | indicates that we are trying to acquire some configuration for a | |
46 | link but haven't acquired any yet. Just to inform the admin that | |
47 | networkd cares about an interface, but is still in progress.. | |
48 | - the DHCP lease data (such as NTP/DNS) is still made available when | |
49 | a carrier is lost on a link. It should be removed instantly. | |
50 | - .network setting that allows overriding of the hostname to send to the dhcp server | |
51 | http://lists.freedesktop.org/archives/systemd-devel/2014-July/021550.html | |
52 | - add per-network Domains= settings, with a special syntax Domains=* | |
53 | for routing all non-otherwise routed traffic to this link | |
54 | - add UseDomains= setting to [DHCP] to add dhcp supplied domains to | |
55 | per-interface Domains= list. | |
56 | - expose in the API the following bits: | |
57 | - option 15, domain name and/or option 119, search list | |
58 | - option 12, host name and/or option 81, fqdn | |
59 | - option 100, 101, timezone | |
60 | - option 123, 144, geolocation | |
61 | - option 252, configure http proxy (PAC/wpad) | |
62 | - networkd's dhcp server should transparently pass on the DNS and | |
63 | NTP server list it got from user configuration and its dhcp client | |
64 | to clients. It should also pass on its own timezone information. | |
65 | ||
66 | * resolved: | |
67 | - DNSSEC | |
68 | - use base64 for key presentation? | |
69 | - add display of private key types (http://tools.ietf.org/html/rfc4034#appendix-A.1.1)? | |
70 | - add nice formatting of DNS timestamps | |
71 | - DNS | |
72 | - search paths | |
73 | - mDNS/DNS-SD | |
74 | - avahi compat | |
75 | - DNS-SD service registration from socket units | |
76 | - edns0 | |
77 | - dname | |
78 | - cname on PTR (?) | |
79 | ||
80 | * Ignore .busname units on classic D-Bus boots, systemd-resolved cannot be started on kdbus | |
81 | without the active policy and should get a Wants=org.freedesktop.resolve1.busname to | |
82 | pull-in the policy. | |
83 | ||
84 | * Allow multiple ExecStart= for all Type= settings, so that we can cover rescue.service nicely | |
85 | ||
86 | * the resolv.conf tmpfiles line should be covered by ENABLE_NETWORKD... | |
87 | ||
88 | * sysusers: | |
89 | - also create entries in /etc/shadow, /etc/gshadow | |
90 | - allow setting the home directory of system users | |
91 | - allow configuration of ranges to allocate items in | |
92 | - add mode where we read sysusers data from stdin, so that we can run this from rpm scriptlets | |
93 | ||
94 | * Add a new verb "systemctl top" | |
95 | ||
96 | * refuse mounting on symlinks | |
97 | ||
98 | * logind: allow users to kill or lock their own sessions | |
99 | ||
100 | * add new gpt type for btrfs volumes | |
101 | ||
102 | * support empty /etc boots nicely: | |
103 | - nspawn/gpt-generator: introduce new gpt partition type for /usr | |
104 | - fstab-generator: support systemd.volatile=yes|no|state on the kernel cmdline, too, similar to nspawn's --volatile= | |
105 | - fstab-generator: add support for usr= in addition to root= on the kernel cmdline | |
106 | ||
107 | * generator that automatically discovers btrfs subvolumes, identifies their purpose based on some xattr on them. | |
108 | ||
109 | * support setting empty environment variables with Environment= and EnvironmentFile= | |
110 | ||
111 | * machined/machinectl: sort IP addresses we return by scope and protocol | |
112 | * machined: write NSS module for looking up IP addresses for machines | |
113 | ||
114 | * timer units: actually add extra delays to timer units with high AccuracySec values, don't start them already when we are awake... | |
115 | ||
116 | * a way for container managers to turn off getty starting via $container_headless= or so... | |
117 | ||
118 | * figure out a nice way how we can let the admin know what child/sibling unit causes cgroup membership for a specific unit | |
119 | ||
120 | * journalctl: add the ability to look for the most recent process of a binary. journalctl /usr/bin/X11 --pid=-1 or so... | |
121 | ||
122 | * set NOTIFY_SOCKET also for control processes | |
123 | ||
124 | * mount_cgroup_controllers(): symlinks need to get the label applied | |
125 | ||
126 | * For timer units: add some mechanisms so that timer units that trigger immediately on boot do not have the services | |
127 | they run added to the initial transaction and thus confuse Type=idle. | |
128 | ||
129 | * Add timeout to early-boot, and shut down the system if it is hit. Solves the laptop-in-bag problem and is useful for embedded cases | |
130 | ||
131 | * Run most system services with cgroupfs read-only and procfs with a more secure mode (doesn't work, since the hidepid= option is per-pid-namespace, not per-mount) | |
132 | ||
133 | * sd-event: generate a failure of a default event loop is executed out-of-thread | |
134 | ||
135 | * expose "Locked" property on logind sesison objects | |
136 | ||
137 | * add bus api to query unit file's X fields. | |
138 | ||
139 | * consider adding RuntimeDirectoryUser= + RuntimeDirectoryGroup= | |
140 | ||
141 | * sd-event: define more intervals where we will shift wakeup intervals around in, 1h, 6h, 24h, ... | |
142 | ||
143 | * gpt-auto-generator: | |
144 | - Support LUKS for root devices | |
145 | - Define new partition type for encrypted swap? Support probed LUKS for encrypted swap? | |
146 | - Make /home automount rather than mount? | |
147 | ||
148 | * improve journalctl performance by loading journal files | |
149 | lazily. Encode just enough information in the file name, so that we | |
150 | do not have to open it to know that it is not interesting for us, for | |
151 | the most common operations. | |
152 | ||
153 | * add generator that pulls in systemd-network from containers when | |
154 | CAP_NET_ADMIN is set, more than the loopback device is defined, even | |
155 | when it is otherwise off | |
156 | ||
157 | * MessageQueueMessageSize= and RLimitFSIZE= (and suchlike) should use parse_iec_size(). | |
158 | ||
159 | * "busctl status" works only as root on dbus1, since we cannot read | |
160 | /proc/$PID/exe | |
161 | ||
162 | * implement Distribute= in socket units to allow running multiple | |
163 | service instances processing the listening socket, and open this up | |
164 | for ReusePort= | |
165 | ||
166 | * socket units: support creating sockets in different namespace, | |
167 | opening it up for JoinsNamespaceOf=. This would require to fork off | |
168 | a tiny process that joins the namespace and creates/binds the socket | |
169 | and passes this back to PID1 via SCM_RIGHTS. This also could be used | |
170 | to allow Chown/chgrp on sockets without requiring NSS in PID 1. | |
171 | ||
172 | * New service property: maximum CPU and wallclock runtime for a service | |
173 | ||
174 | * introduce bus call FreezeUnit(s, b), as well as "systemctl freeze | |
175 | $UNIT" and "systemctl thaw $UNIT" as wrappers around this. The calls | |
176 | should SIGSTOP all unit processes in a loop until all processes of | |
177 | it are fully stopped. This can later be used for app management by | |
178 | desktop UIs such as gnome-shell to freeze apps that are not visible | |
179 | on screen, not unlike how job control works on the shell | |
180 | ||
181 | * completions: | |
182 | - manager property enumeration was broken when systemd moved to /usr/lib/ | |
183 | ||
184 | * cgroups: | |
185 | - implement per-slice CPUFairScheduling=1 switch | |
186 | - handle jointly mounted controllers correctly | |
187 | - introduce high-level settings for RT budget, swappiness | |
188 | - how to reset dynamically changed unit cgroup attributes sanely? | |
189 | - when reloading configuration, apply new cgroup configuration | |
190 | - when recursively showing the cgroup hierarchy, optionally also show | |
191 | the hierarchies of child processes | |
192 | ||
193 | * transient units: | |
194 | - allow creating auxiliary units with the same call | |
195 | - add field to transient units that indicate whether systemd or somebody else saves/restores its settings, for integration with libvirt | |
196 | - ensure scope units may be started only a single time | |
197 | ||
198 | * Automatically configure swap partition to use for hibernation by looking for largest swap partition on the root disk? | |
199 | ||
200 | * when we detect low battery and no AC on boot, show pretty splash and refuse boot | |
201 | ||
202 | * machined, localed: when we try to kill an empty cgroup, generate an ESRCH error over the bus | |
203 | ||
204 | * libsystemd-journal, libsystemd-login, libudev: add calls to easily attach these objects to sd-event event loops | |
205 | ||
206 | * be more careful what we export on the bus as (usec_t) 0 and (usec_t) -1 | |
207 | ||
208 | * unify dispatch table in systemctl_main() and friends | |
209 | ||
210 | * Automatically configure swap partition to use for hibernation by looking for largest swap partition on the root disk? | |
211 | ||
212 | * rfkill,backlight: we probably should run the load tools inside of the udev rules so that the state is properly initialized by the time other software sees it | |
213 | ||
214 | * After coming back from hibernation reset hibernation swap partition using the /dev/snapshot ioctl APIs | |
215 | ||
216 | * If we try to find a unit via a dangling symlink, generate a clean | |
217 | error. Currently, we just ignore it and read the unit from the search | |
218 | path anyway. | |
219 | ||
220 | * refuse boot if /etc/os-release is missing or /etc/machine-id cannot be set up | |
221 | ||
222 | * given that logind now lets PID 1 do all nasty work, we can | |
223 | probably reduce the capability set it retains substantially. | |
224 | (we need CAP_SYS_ADMIN for drmSetMaster(), so maybe not worth it) | |
225 | ||
226 | * btrfs raid assembly: some .device jobs stay stuck in the queue | |
227 | ||
228 | * make sure gdm does not use multi-user-x but the new default X configuration file, and then remove multi-user-x from systemd | |
229 | ||
230 | * man: the documentation of Restart= currently is very misleading and suggests the tools from ExecStartPre= might get restarted. | |
231 | ||
232 | * load .d/*.conf dropins for device units | |
233 | ||
234 | * allow implementation of InaccessibleDirectories=/ plus | |
235 | ReadOnlyDirectories=... for whitelisting files for a service. | |
236 | ||
237 | * sd-bus: | |
238 | - when kdbus does not take our message without memfds, try again with memfds | |
239 | - systemd-bus-proxyd needs to enforce good old XML policy | |
240 | - allow updating attach flags during runtime | |
241 | - pid1: peek into activating message when activating a service | |
242 | - introduce sd_bus_emit_object_added()/sd_bus_emit_object_removed() that automatically includes the build-in interfaces in the list | |
243 | - port to sd-resolve for connecting to TCP dbus servers | |
244 | - see if we can drop more message validation on the sending side | |
245 | - add API to clone sd_bus_message objects | |
246 | - make AddMatch calls on dbus1 transports async? | |
247 | - kdbus: matches against source or destination pids for an "strace -p"-like feel. Problem: The PID info needs to be available in userspace too... | |
248 | - longer term: priority inheritance | |
249 | - dbus spec updates: | |
250 | - kdbus mapping | |
251 | - NameLost/NameAcquired obsolete | |
252 | - GVariant | |
253 | - "const" properties (posted) | |
254 | - path escaping | |
255 | - update systemd.special(7) to mention that dbus.socket is only about the compatibility socket now | |
256 | - test bloom filter generation indexes | |
257 | ||
258 | * sd-event | |
259 | - allow multiple signal handlers per signal? | |
260 | ||
261 | * in the final killing spree, detect processes from the root directory, and | |
262 | complain loudly if they have argv[0][0] == '@' set. | |
263 | https://bugzilla.redhat.com/show_bug.cgi?id=961044 | |
264 | ||
265 | * investigate endianness issues of UUID vs. GUID | |
266 | ||
267 | * dbus: when a unit failed to load (i.e. is in UNIT_ERROR state), we | |
268 | should be able to safely try another attempt when the bus call LoadUnit() is invoked. | |
269 | ||
270 | * add a pam module that passes the hdd passphrase into the PAM stack and then expires it, for usage by gdm auto-login. | |
271 | ||
272 | * add a pam module that on password changes updates any LUKS slot where the password matches | |
273 | ||
274 | * maybe add a generator that looks for "systemd.run=" on the kernel cmdline for container usercases... | |
275 | ||
276 | * timedatctl, localectl: possibly make some commands work without the daemon, for chroot situations... | |
277 | ||
278 | * timedatectl: print a nicer message when enabling ntp fails because ntpd/chrony are not installed | |
279 | ||
280 | * cgtop: make cgtop useful in a container | |
281 | ||
282 | * test/: | |
283 | - add 'set -e' to scripts in test/ | |
284 | - make stuff in test/ work with separate output dir | |
285 | ||
286 | * seems that when we follow symlinks to units we prefer the symlink | |
287 | destination path over /etc and /usr. We should not do that. Instead | |
288 | /etc should always override /run+/usr and also any symlink | |
289 | destination. | |
290 | ||
291 | * when isolating, try to figure out a way how we implicitly can order | |
292 | all units we stop before the isolating unit... | |
293 | ||
294 | * teach ConditionKernelCommandLine= globs or regexes (in order to match foobar={no,0,off}) | |
295 | ||
296 | * after all byte-wise realloc() is slow, even on glibc, so i guess we | |
297 | need manual exponential loops after all | |
298 | ||
299 | * BootLoaderSpec: Clarify that the kernel has to be in $BOOT. Clarify | |
300 | that the boot loader should be installed to the ESP. Define a way | |
301 | how an installer can figure out whether a BLS compliant boot loader | |
302 | is installed. | |
303 | ||
304 | * think about requeuing jobs when daemon-reload is issued? usecase: | |
305 | the initrd issues a reload after fstab from the host is accessible | |
306 | and we might want to requeue the mounts local-fs acquired through | |
307 | that automatically. | |
308 | ||
309 | * systemd-inhibit: make taking delay locks useful: support sending SIGINT or SIGTERM on PrepareForSleep() | |
310 | ||
311 | * journal-or-kmsg is currently broken? See reverted commit 4a01181e460686d8b4a543b1dfa7f77c9e3c5ab8. | |
312 | ||
313 | * remove any syslog support from log.c -- we probably cannot do this before split-off udev is gone for good | |
314 | ||
315 | * shutdown logging: store to EFI var, and store to USB stick? | |
316 | ||
317 | * write UI tool that pops up emergency messages from the journal as notification | |
318 | ||
319 | * think about window-manager-run-as-user-service problem: exit 0 → activate shutdown.target; exit != 0 → restart service | |
320 | ||
321 | * use "log level" rather than "log priority" everywhere | |
322 | ||
323 | * merge unit_kill_common() and unit_kill_context() | |
324 | ||
325 | * introduce ExecCondition= in services | |
326 | ||
327 | * EFI: | |
328 | - honor language efi variables for default language selection (if there are any?) | |
329 | - honor timezone efi variables for default timezone selection (if there are any?) | |
330 | - change bootctl to be backed by systemd-bootd to control temporary and persistent default boot goal plus efi variables | |
331 | ||
332 | * maybe do not install getty@tty1.service symlink in /etc but in /usr? | |
333 | ||
334 | * re-enable "make check" for gtk-doc (broken for unknown reason) | |
335 | ||
336 | * fstab: add new mount option x-systemd-after=/foobar/waldo to allow manual dependencies to other mount points | |
337 | https://bugzilla.redhat.com/show_bug.cgi?id=812826 | |
338 | ||
339 | * print a nicer explanation if people use variable/specifier expansion in ExecStart= for the first word | |
340 | ||
341 | * mount: turn dependency information from /proc/self/mountinfo into dependency information between systemd units. | |
342 | ||
343 | * logind: | |
344 | - logind: optionally, ignore idle-hint logic for autosuspend, block suspend as long as a session is around | |
345 | - When we update the kernel all kind of hibernation should be prohibited until shutdown/reboot | |
346 | - logind: wakelock/opportunistic suspend support | |
347 | - Add pretty name for seats in logind | |
348 | - logind: allow showing logout dialog from system? | |
349 | - we should probably handle SIGTERM/SIGINT to not leave dot files around, just in case | |
350 | - session scopes/user unit: add RequiresMountsFor for the home directory of the user | |
351 | - add Suspend() bus calls which take timestamps to fix double suspend issues when somebody hits suspend and closes laptop quickly. | |
352 | - if pam_systemd is invoked by su from a process that is outside of a | |
353 | any session we should probably just become a NOP, since that's | |
354 | usually not a real user session but just some system code that just | |
355 | needs setuid(). | |
356 | ||
357 | * exec: when deinitializating a tty device fix the perms and group, too, not only when initializing. Set access mode/gid to 0620/tty. | |
358 | ||
359 | * service: watchdog logic: for testing purposes allow ping, but do not require pong | |
360 | ||
361 | * journal: | |
362 | - import and delete pstore filesystem content at startup | |
363 | - journald: also get thread ID from client, plus thread name | |
364 | - journal: when waiting for journal additions in the client always sleep at least 1s or so, in order to minimize wakeups | |
365 | - add API to close/reopen/get fd for journal client fd in libsystemd-journal. | |
366 | - fallback to /dev/log based logging in libsystemd-journal, if we cannot log natively? | |
367 | - declare the local journal protocol stable in the wiki interface chart | |
368 | - journal: reuse XZ context | |
369 | - sd-journal: speed up sd_journal_get_data() with transparent hash table in bg | |
370 | - journald: when dropping msgs due to ratelimit make sure to write | |
371 | "dropped %u messages" not only when we are about to print the next | |
372 | message that works, but alraedy after a short tiemout | |
373 | - check if we can make journalctl by default use --follow mode inside of less if called without args? | |
374 | - maybe add API to send pairs of iovecs via sd_journal_send | |
375 | - journal: when writing journal auto-rotate if time jumps backwards | |
376 | - journal: add a setgid "systemd-journal" utility to invoke from libsystemd-journal, which passes fds via STDOUT and does PK access | |
377 | - journactl: support negative filtering, i.e. FOOBAR!="waldo", | |
378 | and !FOOBAR for events without FOOBAR. | |
379 | - journal: send out marker messages every now and then, and immediately sync with fdatasync() afterwards, in order to have hourly guaranteed syncs. | |
380 | - journal-send.c, log.c: when the log socket is clogged, and we drop, count this and write a message about this when it gets unclogged again. | |
381 | - journal: find a way to allow dropping history early, based on priority, other rules | |
382 | - journal: When used on NFS, check payload hashes | |
383 | - journald: check whether it is OK if the client can still modify delivered journal entries | |
384 | - journal live copy, based on libneon (client) and libmicrohttpd (server) | |
385 | - journald: add kernel cmdline option to disable ratelimiting for debug purposes | |
386 | - refuse taking lower-case variable names in sd_journal_send() and friends. | |
387 | - journald: we currently rotate only after MaxUse+MaxFilesize has been reached. | |
388 | - journal: deal nicely with byte-by-byte copied files, especially regards header | |
389 | - journal: store euid in journal if it differs from uid | |
390 | - journal: sanely deal with entries which are larger than the individual file size, but where the components would fit | |
391 | - Replace utmp, wtmp, btmp, and lastlog completely with journal | |
392 | - journalctl: instead --after-cursor= maybe have a --cursor=XYZ+1 syntax? | |
393 | - tmpfiles: when applying ownership to /run/log/journal, also do this for the journal fails contained in it | |
394 | - when a kernel driver logs in a tight loop, we should ratelimit that too. | |
395 | - journald: optionally, log debug messages to /run but everything else to /var | |
396 | - journald: when we drop syslog messages because the syslog socket is | |
397 | full, make sure to write how many messages are lost as first thing | |
398 | to syslog when it works again. | |
399 | - journald: make sure ratelimit is actually really per-service with the new cgroup changes | |
400 | - change systemd-journal-flush into a service that stays around during | |
401 | boot, and causes the journal to be moved back to /run on shutdown, | |
402 | so that we do not keep /var busy. This needs to happen synchronously, | |
403 | hence doing this via signals is not going to work. | |
404 | ||
405 | * document: | |
406 | - document that deps in [Unit] sections ignore Alias= fields in | |
407 | [Install] units of other units, unless those units are disabled | |
408 | - man: clarify that time-sync.target is not only sysv compat but also useful otherwise. Same for similar targets | |
409 | - document the exit codes when services fail before they are exec()ed | |
410 | - document that service reload may be implemented as service reexec | |
411 | - document in wiki how to map ical recurrence events to systemd timer unit calendar specifications | |
412 | - add a man page containing packaging guidelines and recommending usage of things like Documentation=, PrivateTmp=, PrivateNetwork= and ReadOnlyDirectories=/etc /usr. | |
413 | - document systemd-journal-flush.service properly | |
414 | - documentation: recommend to connect the timer units of a service to the service via Also= in [Install] | |
415 | - man: document the very specific env the shutdown drop-in tools live in | |
416 | - man: extend runlevel(8) to mention that runlevels suck, and are dead. Maybe add runlevel(7) with a note about that too | |
417 | - man: add more examples to man pages | |
418 | - man: maybe sort directives in man pages, and take sections from --help and apply them to man too | |
419 | ||
420 | * systemctl: | |
421 | - systemctl list-jobs - show dependencies | |
422 | - add systemctl switch to dump transaction without executing it | |
423 | - Add a verbose mode to "systemctl start" and friends that explains what is being done or not done | |
424 | - "systemctl disable" on a static unit prints no message and does | |
425 | nothing. "systemctl enable" does nothing, and gives a bad message | |
426 | about it. Should fix both to print nice actionable messages. | |
427 | - print nice message from systemctl --failed if there are no entries shown, and hook that into ExecStartPre of rescue.service/emergency.service | |
428 | - add new command to systemctl: "systemctl system-reexec" which reexecs as many daemons as virtually possible | |
429 | - systemctl enable: fail if target to alias into does not exist? maybe show how many units are enabled afterwards? | |
430 | - systemctl: "Journal has been rotated since unit was started." message is misleading | |
431 | - support "systemctl stop foobar@.service" to stop all units matching a certain template | |
432 | - Something is wrong with symlink handling of "autovt@.service" in "systemctl list-unit-files" | |
433 | - better error message if you run systemctl without systemd running | |
434 | - systemctl status output should should include list of triggering units and their status | |
435 | ||
436 | * unit install: | |
437 | - "systemctl mask" should find all names by which a unit is accessible | |
438 | (i.e. by scanning for symlinks to it) and link them all to /dev/null | |
439 | - systemctl list-unit-files should list generated files (and probably with a new state "generated" for them, or so) | |
440 | - systemctl: maybe add "systemctl add-wants" or so... | |
441 | ||
442 | * timer units: | |
443 | - timer units should get the ability to trigger when: | |
444 | o CLOCK_REALTIME makes jumps (TFD_TIMER_CANCEL_ON_SET) | |
445 | o DST changes | |
446 | - Support 2012-02~4 as syntax for specifying the fourth to last day of the month. | |
447 | - calendarspec: support value ranges with ".." notation. Example: 2013-4..8-1 | |
448 | - when parsing calendar timestamps support the UTC timezone (even if we will not support arbitrary timezone specs, support UTC itself certainly makes sense), also support syntaxes such as +0200 | |
449 | - Modulate timer frequency based on battery state | |
450 | ||
451 | * update the kernel's TZ (sys_tz) when DST changes | |
452 | ||
453 | * sync down the system time to the RTC when: | |
454 | - CLOCK_REALTIME makes jumps (the user explicitely requested a time set) | |
455 | - DST/timezone changes && ntp is active && RTC-in-localtime (never do it without ntp) | |
456 | This takes care of syncing ntpdate updates to the RTC, and DST updates for localtime | |
457 | mode, it will never touch the RTC if the no reliable time source is active or the | |
458 | user did not request anything like it. | |
459 | ||
460 | * add libsystemd-password or so to query passwords during boot using the password agent logic | |
461 | ||
462 | * If we show an error about a unit (such as not showing up) and it has no Description string, then show a description string generated form the reverse of unit_name_mangle(). | |
463 | ||
464 | * fedup: add --unit to systemctl switch-root somehow | |
465 | * fedup: do not delete initrd on switch-root | |
466 | * fedup: generator | |
467 | ||
468 | * clean up date formatting and parsing so that all absolute/relative timestamps we format can also be parsed | |
469 | ||
470 | * on shutdown: move utmp, wall, audit logic all into PID 1 (or logind?), get rid of systemd-update-utmp-runlevel | |
471 | ||
472 | * make repeated alt-ctrl-del presses printing a dump, or even force a reboot without | |
473 | waiting for the timeout | |
474 | ||
475 | * hostnamed: before returning information from /etc/machine-info.conf check the modification data and reread. Similar for localed, ... | |
476 | ||
477 | * currently x-systemd.timeout is lost in the initrd, since crypttab is copied into dracut, but fstab is not | |
478 | ||
479 | * nspawn: | |
480 | - bind mount read-only the cgroup tree higher than nspawn | |
481 | - refuses to boot containers without /etc/machine-id (OK?), and with empty /etc/machine-id (not OK). | |
482 | - support taking a btrfs snapshot at startup and dropping it afterwards | |
483 | ||
484 | * cryptsetup: | |
485 | - cryptsetup-generator: allow specification of passwords in crypttab itself | |
486 | - move cryptsetup key caching into kernel keyctl? | |
487 | https://bugs.freedesktop.org/show_bug.cgi?id=54982 | |
488 | - support rd.luks.allow-discards= kernel cmdline params in cryptsetup generator | |
489 | ||
490 | * hw watchdog: optionally try to use the preset watchdog timeout instead of always overriding it | |
491 | https://bugs.freedesktop.org/show_bug.cgi?id=54712 | |
492 | ||
493 | * after deserializing sockets in socket.c we should reapply sockopts and things | |
494 | ||
495 | * make timer units go away after they elapsed | |
496 | ||
497 | * come up with a nice way to write queue/read_ahead_kb for a block device without interfering with readahead | |
498 | ||
499 | * move PID 1 segfaults to /var/lib/systemd/coredump? | |
500 | ||
501 | * create /sbin/init symlinks from the build system | |
502 | ||
503 | * allow writing multiple conditions in unit files on one line | |
504 | ||
505 | * MountFlags=shared acts as MountFlags=slave right now. | |
506 | ||
507 | * drop PID 1 reloading, only do reexecing (difficult: Reload() | |
508 | currently is properly synchronous, Reexec() is weird, because we | |
509 | cannot delay the response properly until we are back, so instead of | |
510 | being properly synchronous we just keep open the fd and close it | |
511 | when done. That means clients do not get a successful method reply, | |
512 | but much rather a disconnect on success. | |
513 | ||
514 | * properly handle loop back mounts via fstab, especially regards to fsck/passno | |
515 | ||
516 | * allow services with no ExecStart= but with an ExecStop= | |
517 | ||
518 | * dracut-shutdown needs to be ordered before unmounting /boot | |
519 | ||
520 | * initialize the hostname from the fs label of /, if /etc/hostname does not exist? | |
521 | ||
522 | * rename "userspace" to "core-os" | |
523 | ||
524 | * load-fragment: when loading a unit file via a chain of symlinks | |
525 | verify that it is not masked via any of the names traversed. | |
526 | ||
527 | * introduce Type=pid-file | |
528 | ||
529 | * change Requires=basic.target to RequisiteOverride=basic.target | |
530 | ||
531 | * when breaking cycles drop sysv services first, then services from /run, then from /etc, then from /usr | |
532 | ||
533 | * automount: implement expire: | |
534 | - set superblock timeout AUTOFS_DEV_IOCTL_TIMEOUT_CMD | |
535 | - periodically run AUTOFS_DEV_IOCTL_EXPIRE_CMD | |
536 | - every timeout/4 (original autofs logic) | |
537 | - blocking, needs a thread | |
538 | - run until -EAGAIN | |
539 | - receive expire packet on pipe if kernel tells the timeout is over | |
540 | - call umount | |
541 | - answer expire packet on pipe with AUTOFS_DEV_IOCTL_{READY,FAIL}_CMD | |
542 | - AUTOFS_DEV_IOCTL_EXPIRE_CMD returns | |
543 | ||
544 | * ExecOnFailure=/usr/bin/foo | |
545 | ||
546 | * udev: | |
547 | - remove src/udev/udev-builtin-firmware.c (CONFIG_FW_LOADER_USER_HELPER=n) | |
548 | - move to LGPL | |
549 | - kill scsi_id | |
550 | - add trigger --subsystem-match=usb/usb_device device | |
551 | - reimport udev db after MOVE events for devices without dev_t | |
552 | ||
553 | * when a service has the same env var set twice we actually store it twice and return that in systemctl show -p... We should only show the last setting | |
554 | ||
555 | * introduce mix of BindTo and Requisite | |
556 | ||
557 | * There's currently no way to cancel fsck (used to be possible via C-c or c on the console) | |
558 | ||
559 | * add option to sockets to avoid activation. Instead just drop packets/connections, see http://cyberelk.net/tim/2012/02/15/portreserve-systemd-solution/ | |
560 | ||
561 | * default unix qlen is too small (10). bump sysctl? add sockopt? | |
562 | ||
563 | * save coredump in Windows/Mozilla minidump format | |
564 | ||
565 | * support crash reporting operation modes (https://live.gnome.org/GnomeOS/Design/Whiteboards/ProblemReporting) | |
566 | ||
567 | * default to actual 32-bit PIDs, via /proc/sys/kernel/pid_max | |
568 | ||
569 | * be able to specify a forced restart of service A where service B depends on, in case B | |
570 | needs to be auto-respawned? | |
571 | ||
572 | * when a bus name of a service disappears from the bus make sure to queue further activation requests | |
573 | ||
574 | * tmpfiles: | |
575 | - apply "x" on "D" too (see patch from William Douglas) | |
576 | ||
577 | * for services: do not set $HOME in services unless requested | |
578 | ||
579 | * hide PAM options in fragment parser when compile time disabled | |
580 | ||
581 | * when we automatically restart a service, ensure we restart its rdeps, too. | |
582 | ||
583 | * allow Type=simple with PIDFile= | |
584 | https://bugzilla.redhat.com/show_bug.cgi?id=723942 | |
585 | ||
586 | * move PAM code into its own binary | |
587 | ||
588 | * implement Register= switch in .socket units to enable registration | |
589 | in Avahi, RPC and other socket registration services. | |
590 | ||
591 | * make sure systemd-ask-password-wall does not shutdown systemd-ask-password-console too early | |
592 | ||
593 | * support sd_notify() style notification when reload begins (RELOADING=1), reload is finished (READY=1), and add ReloadSignal= then to use in combination | |
594 | ||
595 | * support sd_notify() style notification when shutting down, to make auto-exit bus services work (STOPPING=1) | |
596 | ||
597 | * verify that the AF_UNIX sockets of a service in the fs still exist | |
598 | when we start a service in order to avoid confusion when a user | |
599 | assumes starting a service is enough to make it accessible | |
600 | ||
601 | * Make it possible to set the keymap independently from the font on | |
602 | the kernel cmdline. Right now setting one resets also the other. | |
603 | ||
604 | * and a dbus call to generate target from current state | |
605 | ||
606 | * readahead: | |
607 | - drop /.readahead on bigger upgrades with yum | |
608 | - move readahead files into /var (look for them with .path units?) | |
609 | - readahead: use BTRFS_IOC_DEFRAG_RANGE instead of BTRFS_IOC_DEFRAG ioctl, with START_IO | |
610 | - readahead: when bumping /sys readahead variable save mtime and compare later to detect changes | |
611 | - readahead: make use of EXT4_IOC_MOVE_EXT, as used by http://e4rat.sourceforge.net/ | |
612 | ||
613 | * GC unreferenced jobs (such as .device jobs) | |
614 | ||
615 | * write blog stories about: | |
616 | - hwdb: what belongs into it, lsusb | |
617 | - enabling dbus services | |
618 | - status update | |
619 | - how to make changes to sysctl and sysfs attributes | |
620 | - remote access | |
621 | - how to pass throw-away units to systemd, or dynamically change properties of existing units | |
622 | - how to integrate cgconfig and suchlike with systemd | |
623 | - testing with Harald's awesome test kit | |
624 | - auto-restart | |
625 | - how to develop against journal browsing APIs | |
626 | - the journal HTTP iface | |
627 | - non-cgroup resource management | |
628 | - dynamic resource management with cgroups | |
629 | - refreshed, longer missions statement | |
630 | - calendar time events | |
631 | - init=/bin/sh vs. "emergency" mode, vs. "rescue" mode, vs. "multi-user" mode, vs. "graphical" mode, and the debug shell | |
632 | - how to create your own target | |
633 | - instantiated apache, dovecot and so on | |
634 | - hooking a script into various stages of shutdown/rearly booot | |
635 | ||
636 | * allow port=0 in .socket units | |
637 | ||
638 | * recreate systemd's D-Bus private socket file on SIGUSR2 | |
639 | ||
640 | * Support --test based on current system state | |
641 | ||
642 | * investigate whether the gnome pty helper should be moved into systemd, to provide cgroup support. | |
643 | ||
644 | * maybe introduce ExecRestartPre= | |
645 | ||
646 | * dot output for --test showing the 'initial transaction' | |
647 | ||
648 | * fingerprint.target, wireless.target, gps.target, netdevice.target | |
649 | ||
650 | * drop cap bounding set in readahead and other services | |
651 | ||
652 | * systemd-python: | |
653 | - figure out a simple way to wait for journal events in a way that | |
654 | works with ^C | |
655 | - add documentation to systemd.daemon | |
656 | ||
657 | * bootchart: | |
658 | - plot per-process IO utilization | |
659 | - group processes based on service association (cgroups) | |
660 | - document initcall_debug | |
661 | - kernel cmdline "bootchart" option for simplicity? | |
662 | ||
663 | * udev-link-config: | |
664 | - Make sure ID_PATH is always exported and complete for | |
665 | network devices where possible, so we can safely rely | |
666 | on Path= matching | |
667 | - check MTUBytes parsing (expecting size_t but we are using unsigned) | |
668 | ||
669 | * sd-rtnl: | |
670 | - add support for more attribute types | |
671 | - inbuilt piping support (essentially degenerate async)? see loopback-setup.c and other places | |
672 | ||
673 | * networkd: | |
674 | - add more keys to [Route] and [Address] sections | |
675 | - add support for more DHCPv4 options (and, longer term, other kinds of dynamic config) | |
676 | - add proper initrd support (in particular generate .network/.link files based on /proc/cmdline) | |
677 | - add reduced [Link] support to .network files | |
678 | - add Scope= parsing option for [Network] | |
679 | - properly handle routerless dhcp leases | |
680 | - add more attribute support for SIT tunnel | |
681 | - work with non-ethernet devices | |
682 | - add support for more bond options | |
683 | ||
684 | * networkd-wait-online: | |
685 | - make operstates to wait for configurable? | |
686 | ||
687 | * dhcp: | |
688 | - figure out how much we can increase Maximum Message Size | |
689 | - export timezone information | |
690 | - support RFC4702 (pass FQDN) | |
691 | ||
692 | * dhcp6: | |
693 | - add functions to set previously stored IPv6 addresses on startup and get | |
694 | them at shutdown; store them in client->ia_na | |
695 | - write more test cases | |
696 | - implement and do duplicate address detection, see rfc 4862, 5.4. | |
697 | - implement reconfigure support, see 5.3., 15.11. and 22.20. | |
698 | - implement information request, see 1.2. and 18.1.5. | |
699 | - implement support for temporary adressess (IA_TA) | |
700 | - implement elapsed time option | |
701 | - implement dhcpv6 authentication | |
702 | - investigate the usefulness of Confirm messages; i.e. are there any | |
703 | situations where the link changes without any loss in carrier detection | |
704 | or interface down | |
705 | - some servers don't do rapid commit without a filled in IA_NA, verify | |
706 | this behavior | |
707 | ||
708 | External: | |
709 | ||
710 | * dbus: | |
711 | - natively watch for dbus-*.service symlinks (PENDING) | |
712 | - teach dbus to activate all services it finds in /etc/systemd/services/org-*.service | |
713 | ||
714 | * fix alsa mixer restore to not print error when no config is stored | |
715 | ||
716 | * make cryptsetup lower --iter-time | |
717 | ||
718 | * patch kernel for xattr support in /dev, /proc/, /sys? | |
719 | ||
720 | * kernel: add device_type = "fb", "fbcon" to class "graphics" | |
721 | ||
722 | * drop accountsservice's StandardOutput=syslog and Type=dbus fields | |
723 | ||
724 | * dbus upstream still refers to dbus.target and should not | |
725 | ||
726 | * dbus: in fedora, make /var/lib/dbus/machine-id a symlink to /etc/machine-id | |
727 | ||
728 | * add "# export SYSTEMD_PAGER=" to bash login | |
729 | ||
730 | * /usr/bin/service should actually show the new command line | |
731 | ||
732 | * fedora: suggest auto-restart on failure, but not on success and not on coredump. also, ask people to think about changing the start limit logic. Also point people to RestartPreventExitStatus=, SuccessExitStatus= | |
733 | ||
734 | * fedora: F20: go timer units all the way, leave cron.daily for cron | |
735 | ||
736 | * neither pkexec nor sudo initialize environ[] from the PAM environment? | |
737 | ||
738 | * fedora: update policy to declare access mode and ownership of unit files to root:root 0644, and add an rpmlint check for it | |
739 | ||
740 | * register catalog database signature as file magic | |
741 | ||
742 | * zsh shell completion: <command> <verb> -<TAB> should complete options, but currently | |
743 | does not | |
744 | ||
745 | Regularly: | |
746 | ||
747 | * look for close() vs. close_nointr() vs. close_nointr_nofail() | |
748 | ||
749 | * check for strerror(r) instead of strerror(-r) | |
750 | ||
751 | * Use PR_SET_PROCTITLE_AREA if it becomes available in the kernel | |
752 | ||
753 | * pahole | |
754 | ||
755 | * set_put(), hashmap_put() return values check. i.e. == 0 does not free()! | |
756 | ||
757 | * use secure_getenv() instead of getenv() where appropriate | |
758 | ||
759 | * link up selected blog stories from man pages and unit files Documentation= fields | |
760 | ||
761 | Scheduled for removal or fixing: | |
762 | ||
763 | * xxxOverridable dependencies (probably: fix) |