systemd System and Service Manager
+CHANGES WITH 236:
+
+ * The modprobe.d/ drop-in for the bonding.ko kernel module introduced
+ in v235 has been extended to also set the dummy.ko module option
+ numdummies=0, preventing the kernel from automatically creating
+ dummy0. All dummy interfaces must now be explicitly created.
+
+ * Unknown '%' specifiers in configuration files are now rejected. This
+ applies to units and tmpfiles.d configuration. Any percent characters
+ that are followed by a letter or digit that are not supposed to be
+ interpreted as the beginning of a specifier should be escaped by
+ doubling ("%%"). (So "size=5%" is still accepted, as well as
+ "size=5%,foo=bar", but not "LABEL=x%y%z" since %y and %z are not
+ valid specifiers today.)
+
+ * systemd-resolved now maintains a new dynamic
+ /run/systemd/resolve/stub-resolv.conf compatibility file. It is
+ recommended to make /etc/resolv.conf a symlink to it. This file
+ points at the systemd-resolved stub DNS 127.0.0.53 resolver and
+ includes dynamically acquired search domains, achieving more correct
+ DNS resolution by software that bypasses local DNS APIs such as NSS.
+
+ * The "uaccess" udev tag has been dropped from /dev/kvm and
+ /dev/dri/renderD*. These devices now have the 0666 permissions by
+ default (but this may be changed at build-time). /dev/dri/renderD*
+ will now be owned by the "render" group along with /dev/kfd.
+
+ * "DynamicUser=yes" has been enabled for systemd-timesyncd.service,
+ systemd-journal-gatewayd.service and
+ systemd-journal-upload.service. This means "nss-systemd" must be
+ enabled in /etc/nsswitch.conf to ensure the UIDs assigned to these
+ services are resolved properly.
+
+ * In /etc/fstab two new mount options are now understood:
+ x-systemd.makefs and x-systemd.growfs. The former has the effect that
+ the configured file system is formatted before it is mounted, the
+ latter that the file system is resized to the full block device size
+ after it is mounted (i.e. if the file system is smaller than the
+ partition it resides on, it's grown). This is similar to the fsck
+ logic in /etc/fstab, and pulls in systemd-makefs@.service and
+ systemd-growfs@.service as necessary, similar to
+ systemd-fsck@.service. Resizing is currently only supported on ext4
+ and btrfs.
+
+ * In systemd-networkd, the IPv6 RA logic now optionally may announce
+ DNS server and domain information.
+
+ * Support for the LUKS2 on-disk format for encrypted partitions has
+ been added. This requires libcryptsetup2 during compilation and
+ runtime.
+
+ * The systemd --user instance will now signal "readiness" when its
+ basic.target unit has been reached, instead of when the run queue ran
+ empty for the first time.
+
+ * Tmpfiles.d with user configuration are now also supported.
+ systemd-tmpfiles gained a new --user switch, and snippets placed in
+ ~/.config/user-tmpfiles.d/ and corresponding directories will be
+ executed by systemd-tmpfiles --user running in the new
+ systemd-tmpfiles-setup.service and systemd-tmpfiles-clean.service
+ running in the user session.
+
+ * Unit files and tmpfiles.d snippets learnt three new % specifiers:
+ %S resolves to the top-level state directory (/var/lib for the system
+ instance, $XDG_CONFIG_HOME for the user instance), %C resolves to the
+ top-level cache directory (/var/cache for the system instance,
+ $XDG_CACHE_HOME for the user instance), %L resolves to the top-level
+ logs directory (/var/log for the system instance,
+ $XDG_CONFIG_HOME/log/ for the user instance). This matches the
+ existing %t specifier, that resolves to the top-level runtime
+ directory (/run for the system instance, and $XDG_RUNTIME_DIR for the
+ user instance).
+
+ * journalctl learnt a new parameter --output-fields= for limiting the
+ set of journal fields to output in verbose and JSON output modes.
+
+ * systemd-timesyncd's configuration file gained a new option
+ RootDistanceMaxSec= for setting the maximum root distance of servers
+ it'll use, as well as the new options PollIntervalMinSec= and
+ PollIntervalMaxSec= to tweak the minimum and maximum poll interval.
+
+ * bootctl gained a new command "list" for listing all available boot
+ menu items on systems that follow the boot loader specification.
+
+ * systemctl gained a new --dry-run switch that shows what would be done
+ instead of doing it, and is currently supported by the shutdown and
+ sleep verbs.
+
+ * ConditionSecurity= can now detect the TOMOYO security module.
+
+ * Unit file [Install] sections are now also respected in unit drop-in
+ files. This is intended to be used by drop-ins under /usr/lib/.
+
+ * systemd-firstboot may now also set the initial keyboard mapping.
+
+ * Udev "changed" events for devices which are exposed as systemd
+ .device units are now propagated to units specified in
+ ReloadPropagatedFrom= as reload requests.
+
+ * If a udev device has a SYSTEMD_WANTS= property containing a systemd
+ unit template name (i.e. a name in the form of 'foobar@.service',
+ without the instance component between the '@' and - the '.'), then
+ the escaped sysfs path of the device is automatically used as the
+ instance.
+
+ * SystemCallFilter= in unit files has been extended so that an "errno"
+ can be specified individually for each system call. Example:
+ SystemCallFilter=~uname:EILSEQ.
+
+ * The cgroup delegation logic has been substantially updated. Delegate=
+ now optionally takes a list of controllers (instead of a boolean, as
+ before), which lists the controllers to delegate at least.
+
+ * The networkd DHCPv6 client now implements the FQDN option (RFC 4704).
+
+ * A new LogLevelMax= setting configures the maximum log level any
+ process of the service may log at (i.e. anything with a lesser
+ priority than what is specified is automatically dropped). A new
+ LogExtraFields= setting allows configuration of additional journal
+ fields to attach to all log records generated by any of the unit's
+ processes.
+
+ * New StandardInputData= and StandardInputText= settings along with the
+ new option StandardInput=data may be used to configure textual or
+ binary data that shall be passed to the executed service process via
+ standard input, encoded in-line in the unit file.
+
+ * StandardInput=, StandardOutput= and StandardError= may now be used to
+ connect stdin/stdout/stderr of executed processes directly with a
+ file or AF_UNIX socket in the file system, using the new "file:" option.
+
+ * A new unit file option CollectMode= has been added, that allows
+ tweaking the garbage collection logic for units. It may be used to
+ tell systemd to garbage collect units that have failed automatically
+ (normally it only GCs units that exited successfully). systemd-run
+ and systemd-mount expose this new functionality with a new -G option.
+
+ * "machinectl bind" may now be used to bind mount non-directories
+ (i.e. regularfiles, devices, fifos, sockets).
+
+ * systemd-analyze gained a new verb "calendar" for validating and
+ testing calendar time specifications to use for OnCalendar= in timer
+ units. Besides validating the expression it will calculate the next
+ time the specified expression would elapse.
+
+ * In addition to the pre-existing FailureAction= unit file setting
+ there's now SuccessAction=, for configuring a shutdown action to
+ execute when a unit completes successfully. This is useful in
+ particular inside containers that shall terminate after some workload
+ has been completed. Also, both options are now supported for all unit
+ types, not just services.
+
+ * networkds's IP rule support gained two new options
+ IncomingInterface= and OutgoingInterface= for configuring the incoming
+ and outgoing interfaces of configured rules. systemd-networkd also
+ gained support for "vxcan" network devices.
+
+ * networkd gained a new setting RequiredForOnline=, taking a
+ boolean. If set, systemd-wait-online will take it into consideration
+ when determining that the system is up, otherwise it will ignore the
+ interface for this purpose.
+
+ * The sd_notify() protocol gained support for a new operation: with
+ FDSTOREREMOVE=1 file descriptors may be removed from the per-service
+ store again, ahead of POLLHUP or POLLERR when they are removed
+ anyway.
+
+ * A new document UIDS-GIDS.md has been added to the source tree, that
+ documents the UID/GID range and assignment assumptions and
+ requirements of systemd.
+
+ * The watchdog device PID 1 will ping may now be configured through the
+ WatchdogDevice= configuration file setting, or by setting the
+ systemd.watchdog_service= kernel commandline option.
+
+ * systemd-resolved's gained support for registering DNS-SD services on
+ the local network using MulticastDNS. Services may either be
+ registered by dropping in a .dnssd file in /etc/systemd/dnssd/ (or
+ the same dir below /run, /usr/lib), or through its D-Bus API.
+
+ * The sd_notify() protocol can now with EXTEND_TIMEOUT_USEC=microsecond
+ extend the effective start, runtime, and stop time. The service must
+ continue to send EXTEND_TIMEOUT_USEC within the period specified to
+ prevent the service manager from making the service as timedout.
+
+ * systemd-resolved's DNSSEC support gained support for RFC 8080
+ (Ed25519 keys and signatures).
+
+ * The systemd-resolve command line tool gained a new set of options
+ --set-dns=, --set-domain=, --set-llmnr=, --set-mdns=, --set-dnssec=,
+ --set-nta= and --revert to configure per-interface DNS configuration
+ dynamically during runtime. It's useful for pushing DNS information
+ into systemd-resolved from DNS hook scripts that various interface
+ managing software supports (such as pppd).
+
+ * systemd-nspawn gained a new --network-namespace-path= command line
+ option, which may be used to make a container join an existing
+ network namespace, by specifying a path to a "netns" file.
+
+ Contributions from: Alan Jenkins, Alan Robertson, Alessandro Ghedini,
+ Andrew Jeddeloh, Antonio Rojas, Ari, asavah, bleep_blop, Carsten
+ Strotmann, Christian Brauner, Christian Hesse, Clinton Roy, Collin
+ Eggert, Cong Wang, Daniel Black, Daniel Lockyer, Daniel Rusek, Dimitri
+ John Ledkov, Dmitry Rozhkov, Dongsu Park, Edward A. James, Evgeny
+ Vereshchagin, Florian Klink, Franck Bui, Gwendal Grignou, Hans de
+ Goede, Harald Hoyer, Hristo Venev, Iago López Galeiras, Ikey Doherty,
+ Jakub Wilk, Jérémy Rosen, Jiahui Xie, John Lin, José Bollo, Josef
+ Andersson, juga0, Krzysztof Nowicki, Kyle Walker, Lars Karlitski, Lars
+ Kellogg-Stedman, Lauri Tirkkonen, Lennart Poettering, Lubomir Rintel,
+ Luca Bruno, Lucas Werkmeister, Lukáš Nykrýn, Lukáš Říha, Lukasz
+ Rubaszewski, Maciej S. Szmigiero, Mantas Mikulėnas, Marcus Folkesson,
+ Martin Steuer, Mathieu Trudel-Lapierre, Matija Skala,
+ Matthias-Christian Ott, Max Resch, Michael Biebl, Michael Vogt, Michal
+ Koutný, Michal Sekletar, Mike Gilbert, Muhammet Kara, Neil Brown, Olaf
+ Hering, Ondrej Kozina, Patrik Flykt, Patryk Kocielnik, Peter Hutterer,
+ Piotr Drąg, Razvan Cojocaru, Robin McCorkell, Roland Hieber, Saran
+ Tunyasuvunakool, Sergey Ptashnick, Shawn Landden, Shuang Liu, Simon
+ Arlott, Simon Peeters, Stanislav Angelovič, Stefan Agner, Susant
+ Sahani, Sylvain Plantefève, Thomas Blume, Thomas Haller, Tiago Salem
+ Herrmann, Tinu Weber, Tom Stellard, Topi Miettinen, Torsten Hilbrich,
+ Vito Caputo, Vladislav Vishnyakov, WaLyong Cho, Yu Watanabe, Zbigniew
+ Jędrzejewski-Szmek, Zeal Jagannatha
+
+ — Berlin, 2017-12-14
+
CHANGES WITH 235:
- * modprobe.d drop-in is now shipped by default that sets bonding module
- option max_bonds=0. This overrides the kernel default, to avoid
- conflicts and ambiguity as to whether or not bond0 should be managed
- by networkd or not. This resolves multiple bugs of bond0 properties
- not being applied, when bond0 is configured with
- networkd. Distributors may choose to not package this, however in
- that case users will be prevented from correctly managing bond0
- interface using networkd.
+ * INCOMPATIBILITY: systemd-logind.service and other long-running
+ services now run inside an IPv4/IPv6 sandbox, prohibiting them any IP
+ communication with the outside. This generally improves security of
+ the system, and is in almost all cases a safe and good choice, as
+ these services do not and should not provide any network-facing
+ functionality. However, systemd-logind uses the glibc NSS API to
+ query the user database. This creates problems on systems where NSS
+ is set up to directly consult network services for user database
+ lookups. In particular, this creates incompatibilities with the
+ "nss-nis" module, which attempts to directly contact the NIS/YP
+ network servers it is configured for, and will now consistently
+ fail. In such cases, it is possible to turn off IP sandboxing for
+ systemd-logind.service (set IPAddressDeny= in its [Service] section
+ to the empty string, via a .d/ unit file drop-in). Downstream
+ distributions might want to update their nss-nis packaging to include
+ such a drop-in snippet, accordingly, to hide this incompatibility
+ from the user. Another option is to make use of glibc's nscd service
+ to proxy such network requests through a privilege-separated, minimal
+ local caching daemon, or to switch to more modern technologies such
+ sssd, whose NSS hook-ups generally do not involve direct network
+ access. In general, we think it's definitely time to question the
+ implementation choices of nss-nis, i.e. whether it's a good idea
+ today to embed a network-facing loadable module into all local
+ processes that need to query the user database, including the most
+ trivial and benign ones, such as "ls". For more details about
+ IPAddressDeny= see below.
+
+ * A new modprobe.d drop-in is now shipped by default that sets the
+ bonding module option max_bonds=0. This overrides the kernel default,
+ to avoid conflicts and ambiguity as to whether or not bond0 should be
+ managed by systemd-networkd or not. This resolves multiple issues
+ with bond0 properties not being applied, when bond0 is configured
+ with systemd-networkd. Distributors may choose to not package this,
+ however in that case users will be prevented from correctly managing
+ bond0 interface using systemd-networkd.
* systemd-analyze gained new verbs "get-log-level" and "get-log-target"
- which print the logging level and target of the system manager,
- respectively. They complement the existing "set-log-level" and
- "set-log-target" verbs, which can be used to change those values.
-
- * systemd-networkd .network DHCP setting UseMTU default has changed
- from false to true. Meaning, DHCP server advertised mtu setting is
- now applied by default. This resolves networking issues on low-mtu
- networks.
+ which print the logging level and target of the system manager. They
+ complement the existing "set-log-level" and "set-log-target" verbs
+ used to change those values.
+
+ * journald.conf gained a new boolean setting ReadKMsg= which defaults
+ to on. If turned off kernel log messages will not be read by
+ systemd-journald or included in the logs. It also gained a new
+ setting LineMax= for configuring the maximum line length in
+ STDOUT/STDERR log streams. The new default for this value is 48K, up
+ from the previous hardcoded 2048.
+
+ * A new unit setting RuntimeDirectoryPreserve= has been added, which
+ allows more detailed control of what to do with a runtime directory
+ configured with RuntimeDirectory= (i.e. a directory below /run or
+ $XDG_RUNTIME_DIR) after a unit is stopped.
+
+ * The RuntimeDirectory= setting for units gained support for creating
+ deeper subdirectories below /run or $XDG_RUNTIME_DIR, instead of just
+ one top-level directory.
+
+ * Units gained new options StateDirectory=, CacheDirectory=,
+ LogsDirectory= and ConfigurationDirectory= which are closely related
+ to RuntimeDirectory= but manage per-service directories below
+ /var/lib, /var/cache, /var/log and /etc. By making use of them it is
+ possible to write unit files which when activated automatically gain
+ properly owned service specific directories in these locations, thus
+ making unit files self-contained and increasing compatibility with
+ stateless systems and factory reset where /etc or /var are
+ unpopulated at boot. Matching these new settings there's also
+ StateDirectoryMode=, CacheDirectoryMode=, LogsDirectoryMode=,
+ ConfigurationDirectoryMode= for configuring the access mode of these
+ directories. These settings are particularly useful in combination
+ with DynamicUser=yes as they provide secure, properly-owned,
+ writable, and stateful locations for storage, excluded from the
+ sandbox that such services live in otherwise.
+
+ * Automake support has been removed from this release. systemd is now
+ Meson-only.
+
+ * systemd-journald will now aggressively cache client metadata during
+ runtime, speeding up log write performance under pressure. This comes
+ at a small price though: as much of the metadata is read
+ asynchronously from /proc/ (and isn't implicitly attached to log
+ datagrams by the kernel, like UID/GID/PID/SELinux are) this means the
+ metadata stored alongside a log entry might be slightly
+ out-of-date. Previously it could only be slightly newer than the log
+ message. The time window is small however, and given that the kernel
+ is unlikely to be improved anytime soon in this regard, this appears
+ acceptable to us.
+
+ * nss-myhostname/systemd-resolved will now by default synthesize an
+ A/AAAA resource record for the "_gateway" hostname, pointing to the
+ current default IP gateway. Previously it did that for the "gateway"
+ name, hampering adoption, as some distributions wanted to leave that
+ host name open for local use. The old behaviour may still be
+ requested at build time.
+
+ * systemd-networkd's [Address] section in .network files gained a new
+ Scope= setting for configuring the IP address scope. The [Network]
+ section gained a new boolean setting ConfigureWithoutCarrier= that
+ tells systemd-networkd to ignore link sensing when configuring the
+ device. The [DHCP] section gained a new Anonymize= boolean option for
+ turning on a number of options suggested in RFC 7844. A new
+ [RoutingPolicyRule] section has been added for configuring the IP
+ routing policy. The [Route] section has gained support for a new
+ Type= setting which permits configuring
+ blackhole/unreachable/prohibit routes.
+
+ * The [VRF] section in .netdev files gained a new Table= setting for
+ configuring the routing table to use. The [Tunnel] section gained a
+ new Independent= boolean field for configuring tunnels independent of
+ an underlying network interface. The [Bridge] section gained a new
+ GroupForwardMask= option for configuration of propagation of link
+ local frames between bridge ports.
+
+ * The WakeOnLan= setting in .link files gained support for a number of
+ new modes. A new TCP6SegmentationOffload= setting has been added for
+ configuring TCP/IPv6 hardware segmentation offload.
+
+ * The IPv6 RA sender implementation may now optionally send out RDNSS
+ and RDNSSL records to supply DNS configuration to peers.
+
+ * systemd-nspawn gained support for a new --system-call-filter= command
+ line option for adding and removing entries in the default system
+ call filter it applies. Moreover systemd-nspawn has been changed to
+ implement a system call whitelist instead of a blacklist.
+
+ * systemd-run gained support for a new --pipe command line option. If
+ used the STDIN/STDOUT/STDERR file descriptors passed to systemd-run
+ are directly passed on to the activated transient service
+ executable. This allows invoking arbitrary processes as systemd
+ services (for example to take benefit of dependency management,
+ accounting management, resource management or log management that is
+ done automatically for services) — while still allowing them to be
+ integrated in a classic UNIX shell pipeline.
+
+ * When a service sends RELOAD=1 via sd_notify() and reload propagation
+ using ReloadPropagationTo= is configured, a reload is now propagated
+ to configured units. (Previously this was only done on explicitly
+ requested reloads, using "systemctl reload" or an equivalent
+ command.)
+
+ * For each service unit a restart counter is now kept: it is increased
+ each time the service is restarted due to Restart=, and may be
+ queried using "systemctl show -p NRestarts …".
+
+ * New system call filter groups @aio, @sync, @chown, @setuid, @memlock,
+ @signal and @timer have been added, for usage with SystemCallFilter=
+ in unit files and the new --system-call-filter= command line option
+ of systemd-nspawn (see above).
+
+ * ExecStart= lines in unit files gained two new modifiers: when a
+ command line is prefixed with "!" the command will be executed as
+ configured, except for the credentials applied by
+ setuid()/setgid()/setgroups(). It is very similar to the pre-existing
+ "+", but does still apply namespacing options unlike "+". There's
+ also "!!" now, which is mostly identical, but becomes a NOP on
+ systems that support ambient capabilities. This is useful to write
+ unit files that work with ambient capabilities where possible but
+ automatically fall back to traditional privilege dropping mechanisms
+ on systems where this is not supported.
+
+ * ListenNetlink= settings in socket units now support RDMA netlink
+ sockets.
+
+ * A new unit file setting LockPersonality= has been added which permits
+ locking down the chosen execution domain ("personality") of a service
+ during runtime.
+
+ * A new special target "getty-pre.target" has been added, which is
+ ordered before all text logins, and may be used to order services
+ before textual logins acquire access to the console.
+
+ * systemd will now attempt to load the virtio-rng.ko kernel module very
+ early on if a VM environment supporting this is detected. This should
+ improve entropy during early boot in virtualized environments.
+
+ * A _netdev option is now supported in /etc/crypttab that operates in a
+ similar way as the same option in /etc/fstab: it permits configuring
+ encrypted devices that need to be ordered after the network is up.
+ Following this logic, two new special targets
+ remote-cryptsetup-pre.target and remote-cryptsetup.target have been
+ added that are to cryptsetup.target what remote-fs.target and
+ remote-fs-pre.target are to local-fs.target.
+
+ * Service units gained a new UnsetEnvironment= setting which permits
+ unsetting specific environment variables for services that are
+ normally passed to it (for example in order to mask out locale
+ settings for specific services that can't deal with it).
+
+ * Units acquired a new boolean option IPAccounting=. When turned on, IP
+ traffic accounting (packet count as well as byte count) is done for
+ the service, and shown as part of "systemctl status" or "systemd-run
+ --wait".
+
+ * Service units acquired two new options IPAddressAllow= and
+ IPAddressDeny=, taking a list of IPv4 or IPv6 addresses and masks,
+ for configuring a simple IP access control list for all sockets of
+ the unit. These options are available also on .slice and .socket
+ units, permitting flexible access list configuration for individual
+ services as well as groups of services (as defined by a slice unit),
+ including system-wide. Note that IP ACLs configured this way are
+ enforced on every single IPv4 and IPv6 socket created by any process
+ of the service unit, and apply to ingress as well as egress traffic.
+
+ * If CPUAccounting= or IPAccounting= is turned on for a unit a new
+ structured log message is generated each time the unit is stopped,
+ containing information about the consumed resources of this
+ invocation.
+
+ * A new setting KeyringMode= has been added to unit files, which may be
+ used to control how the kernel keyring is set up for executed
+ processes.
+
+ * "systemctl poweroff", "systemctl reboot", "systemctl halt",
+ "systemctl kexec" and "systemctl exit" are now always asynchronous in
+ behaviour (that is: these commands return immediately after the
+ operation was enqueued instead of waiting for the operation to
+ complete). Previously, "systemctl poweroff" and "systemctl reboot"
+ were asynchronous on systems using systemd-logind (i.e. almost
+ always, and like they were on sysvinit), and the other three commands
+ were unconditionally synchronous. With this release this is cleaned
+ up, and callers will see the same asynchronous behaviour on all
+ systems for all five operations.
+
+ * systemd-logind gained new Halt() and CanHalt() bus calls for halting
+ the system.
+
+ * .timer units now accept calendar specifications in other timezones
+ than UTC or the local timezone.
+
+ * The tmpfiles snippet var.conf has been changed to create
+ /var/log/btmp with access mode 0660 instead of 0600. It was owned by
+ the "utmp" group already, and it appears to be generally understood
+ that members of "utmp" can modify/flush the utmp/wtmp/lastlog/btmp
+ databases. Previously this was implemented correctly for all these
+ databases excepts btmp, which has been opened up like this now
+ too. Note that while the other databases are world-readable
+ (i.e. 0644), btmp is not and remains more restrictive.
+
+ * The systemd-resolve tool gained a new --reset-server-features
+ switch. When invoked like this systemd-resolved will forget
+ everything it learnt about the features supported by the configured
+ upstream DNS servers, and restarts the feature probing logic on the
+ next resolver look-up for them at the highest feature level
+ again.
+
+ * The status dump systemd-resolved sends to the logs upon receiving
+ SIGUSR1 now also includes information about all DNS servers it is
+ configured to use, and the features levels it probed for them.
+
+ Contributions from: Abdó Roig-Maranges, Alan Jenkins, Alexander
+ Kuleshov, Andreas Rammhold, Andrew Jeddeloh, Andrew Soutar, Ansgar
+ Burchardt, Beniamino Galvani, Benjamin Berg, Benjamin Robin, Charles
+ Huber, Christian Hesse, Daniel Berrange, Daniel Kahn Gillmor, Daniel
+ Mack, Daniel Rusek, Daniel Șerbănescu, Davide Cavalca, Dimitri John
+ Ledkov, Diogo Pereira, Djalal Harouni, Dmitriy Geels, Dmitry Torokhov,
+ ettavolt, Evgeny Vereshchagin, Fabio Kung, Felipe Sateler, Franck Bui,
+ Hans de Goede, Harald Hoyer, Insun Pyo, Ivan Kurnosov, Ivan Shapovalov,
+ Jakub Wilk, Jan Synacek, Jason Gunthorpe, Jeremy Bicha, Jérémy Rosen,
+ John Lin, jonasBoss, Jonathan Lebon, Jonathan Teh, Jon Ringle, Jörg
+ Thalheim, Jouke Witteveen, juga0, Justin Capella, Justin Michaud,
+ Kai-Heng Feng, Lennart Poettering, Lion Yang, Luca Bruno, Lucas
+ Werkmeister, Lukáš Nykrýn, Marcel Hollerbach, Marcus Lundblad, Martin
+ Pitt, Michael Biebl, Michael Grzeschik, Michal Sekletar, Mike Gilbert,
+ Neil Brown, Nicolas Iooss, Patrik Flykt, pEJipE, Piotr Drąg, Russell
+ Stuart, S. Fan, Shengyao Xue, Stefan Pietsch, Susant Sahani, Tejun Heo,
+ Thomas Miller, Thomas Sailer, Tobias Hunger, Tomasz Pala, Tom
+ Gundersen, Tommi Rantala, Topi Miettinen, Torstein Husebø, userwithuid,
+ Vasilis Liaskovitis, Vito Caputo, WaLyong Cho, William Douglas, Xiang
+ Fan, Yu Watanabe, Zbigniew Jędrzejewski-Szmek
+
+ — Berlin, 2017-10-06
CHANGES WITH 234:
projects / thirdparty / systemd.git / blobdiff