final v236 update (#7649)

[thirdparty/systemd.git] / NEWS

diff --git a/NEWS b/NEWS
index 45fd911fadd49370e8359993b4ba01f35a72e56c..1def98212de362e14e4fca2403378b2e4ca2c574 100644 (file)
--- a/NEWS
+++ b/NEWS
@@ -1,7 +1,259 @@
 systemd System and Service Manager
 
 systemd System and Service Manager
 

+CHANGES WITH 236:
+
+        * The modprobe.d/ drop-in for the bonding.ko kernel module introduced
+          in v235 has been extended to also set the dummy.ko module option
+          numdummies=0, preventing the kernel from automatically creating
+          dummy0. All dummy interfaces must now be explicitly created.
+
+        * Unknown '%' specifiers in configuration files are now rejected. This
+          applies to units and tmpfiles.d configuration. Any percent characters
+          that are followed by a letter or digit that are not supposed to be
+          interpreted as the beginning of a specifier should be escaped by
+          doubling ("%%").  (So "size=5%" is still accepted, as well as
+          "size=5%,foo=bar", but not "LABEL=x%y%z" since %y and %z are not
+          valid specifiers today.)
+
+        * systemd-resolved now maintains a new dynamic
+          /run/systemd/resolve/stub-resolv.conf compatibility file. It is
+          recommended to make /etc/resolv.conf a symlink to it. This file
+          points at the systemd-resolved stub DNS 127.0.0.53 resolver and
+          includes dynamically acquired search domains, achieving more correct
+          DNS resolution by software that bypasses local DNS APIs such as NSS.
+
+        * The "uaccess" udev tag has been dropped from /dev/kvm and
+          /dev/dri/renderD*.  These devices now have the 0666 permissions by
+          default (but this may be changed at build-time). /dev/dri/renderD*
+          will now be owned by the "render" group along with /dev/kfd.
+
+        * "DynamicUser=yes" has been enabled for systemd-timesyncd.service,
+          systemd-journal-gatewayd.service and
+          systemd-journal-upload.service. This means "nss-systemd" must be
+          enabled in /etc/nsswitch.conf to ensure the UIDs assigned to these
+          services are resolved properly.
+
+        * In /etc/fstab two new mount options are now understood:
+          x-systemd.makefs and x-systemd.growfs. The former has the effect that
+          the configured file system is formatted before it is mounted, the
+          latter that the file system is resized to the full block device size
+          after it is mounted (i.e. if the file system is smaller than the
+          partition it resides on, it's grown). This is similar to the fsck
+          logic in /etc/fstab, and pulls in systemd-makefs@.service and
+          systemd-growfs@.service as necessary, similar to
+          systemd-fsck@.service. Resizing is currently only supported on ext4
+          and btrfs.
+
+        * In systemd-networkd, the IPv6 RA logic now optionally may announce
+          DNS server and domain information.
+
+        * Support for the LUKS2 on-disk format for encrypted partitions has
+          been added. This requires libcryptsetup2 during compilation and
+          runtime.
+
+        * The systemd --user instance will now signal "readiness" when its
+          basic.target unit has been reached, instead of when the run queue ran
+          empty for the first time.
+
+        * Tmpfiles.d with user configuration are now also supported.
+          systemd-tmpfiles gained a new --user switch, and snippets placed in
+          ~/.config/user-tmpfiles.d/ and corresponding directories will be
+          executed by systemd-tmpfiles --user running in the new
+          systemd-tmpfiles-setup.service and systemd-tmpfiles-clean.service
+          running in the user session.
+
+        * Unit files and tmpfiles.d snippets learnt three new % specifiers:
+          %S resolves to the top-level state directory (/var/lib for the system
+          instance, $XDG_CONFIG_HOME for the user instance), %C resolves to the
+          top-level cache directory (/var/cache for the system instance,
+          $XDG_CACHE_HOME for the user instance), %L resolves to the top-level
+          logs directory (/var/log for the system instance,
+          $XDG_CONFIG_HOME/log/ for the user instance). This matches the
+          existing %t specifier, that resolves to the top-level runtime
+          directory (/run for the system instance, and $XDG_RUNTIME_DIR for the
+          user instance).
+
+        * journalctl learnt a new parameter --output-fields= for limiting the
+          set of journal fields to output in verbose and JSON output modes.
+
+        * systemd-timesyncd's configuration file gained a new option
+          RootDistanceMaxSec= for setting the maximum root distance of servers
+          it'll use, as well as the new options PollIntervalMinSec= and
+          PollIntervalMaxSec= to tweak the minimum and maximum poll interval.
+
+        * bootctl gained a new command "list" for listing all available boot
+          menu items on systems that follow the boot loader specification.
+
+        * systemctl gained a new --dry-run switch that shows what would be done
+          instead of doing it, and is currently supported by the shutdown and
+          sleep verbs.
+
+        * ConditionSecurity= can now detect the TOMOYO security module.
+
+        * Unit file [Install] sections are now also respected in unit drop-in
+          files. This is intended to be used by drop-ins under /usr/lib/.
+
+        * systemd-firstboot may now also set the initial keyboard mapping.
+
+        * Udev "changed" events for devices which are exposed as systemd
+          .device units are now propagated to units specified in
+          ReloadPropagatedFrom= as reload requests.
+
+        * If a udev device has a SYSTEMD_WANTS= property containing a systemd
+          unit template name (i.e. a name in the form of 'foobar@.service',
+          without the instance component between the '@' and - the '.'), then
+          the escaped sysfs path of the device is automatically used as the
+          instance.
+
+        * SystemCallFilter= in unit files has been extended so that an "errno"
+          can be specified individually for each system call. Example:
+          SystemCallFilter=~uname:EILSEQ.
+
+        * The cgroup delegation logic has been substantially updated. Delegate=
+          now optionally takes a list of controllers (instead of a boolean, as
+          before), which lists the controllers to delegate at least.
+
+        * The networkd DHCPv6 client now implements the FQDN option (RFC 4704).
+
+        * A new LogLevelMax= setting configures the maximum log level any
+          process of the service may log at (i.e. anything with a lesser
+          priority than what is specified is automatically dropped). A new
+          LogExtraFields= setting allows configuration of additional journal
+          fields to attach to all log records generated by any of the unit's
+          processes.
+
+        * New StandardInputData= and StandardInputText= settings along with the
+          new option StandardInput=data may be used to configure textual or
+          binary data that shall be passed to the executed service process via
+          standard input, encoded in-line in the unit file.
+
+        * StandardInput=, StandardOutput= and StandardError= may now be used to
+          connect stdin/stdout/stderr of executed processes directly with a
+          file or AF_UNIX socket in the file system, using the new "file:" option.
+
+        * A new unit file option CollectMode= has been added, that allows
+          tweaking the garbage collection logic for units. It may be used to
+          tell systemd to garbage collect units that have failed automatically
+          (normally it only GCs units that exited successfully). systemd-run
+          and systemd-mount expose this new functionality with a new -G option.
+
+        * "machinectl bind" may now be used to bind mount non-directories
+          (i.e. regularfiles, devices, fifos, sockets).
+
+        * systemd-analyze gained a new verb "calendar" for validating and
+          testing calendar time specifications to use for OnCalendar= in timer
+          units. Besides validating the expression it will calculate the next
+          time the specified expression would elapse.
+
+        * In addition to the pre-existing FailureAction= unit file setting
+          there's now SuccessAction=, for configuring a shutdown action to
+          execute when a unit completes successfully. This is useful in
+          particular inside containers that shall terminate after some workload
+          has been completed. Also, both options are now supported for all unit
+          types, not just services.
+
+        * networkds's IP rule support gained two new options
+          IncomingInterface= and OutgoingInterface= for configuring the incoming
+          and outgoing interfaces of configured rules. systemd-networkd also
+          gained support for "vxcan" network devices.
+
+        * networkd gained a new setting RequiredForOnline=, taking a
+          boolean. If set, systemd-wait-online will take it into consideration
+          when determining that the system is up, otherwise it will ignore the
+          interface for this purpose.
+
+        * The sd_notify() protocol gained support for a new operation: with
+          FDSTOREREMOVE=1 file descriptors may be removed from the per-service
+          store again, ahead of POLLHUP or POLLERR when they are removed
+          anyway.
+
+        * A new document UIDS-GIDS.md has been added to the source tree, that
+          documents the UID/GID range and assignment assumptions and
+          requirements of systemd.
+
+        * The watchdog device PID 1 will ping may now be configured through the
+          WatchdogDevice= configuration file setting, or by setting the
+          systemd.watchdog_service= kernel commandline option.
+
+        * systemd-resolved's gained support for registering DNS-SD services on
+          the local network using MulticastDNS. Services may either be
+          registered by dropping in a .dnssd file in /etc/systemd/dnssd/ (or
+          the same dir below /run, /usr/lib), or through its D-Bus API.
+
+        * The sd_notify() protocol can now with EXTEND_TIMEOUT_USEC=microsecond
+          extend the effective start, runtime, and stop time. The service must
+          continue to send EXTEND_TIMEOUT_USEC within the period specified to
+          prevent the service manager from making the service as timedout.
+
+        * systemd-resolved's DNSSEC support gained support for RFC 8080
+          (Ed25519 keys and signatures).
+
+        * The systemd-resolve command line tool gained a new set of options
+          --set-dns=, --set-domain=, --set-llmnr=, --set-mdns=, --set-dnssec=,
+          --set-nta= and --revert to configure per-interface DNS configuration
+          dynamically during runtime. It's useful for pushing DNS information
+          into systemd-resolved from DNS hook scripts that various interface
+          managing software supports (such as pppd).
+
+        * systemd-nspawn gained a new --network-namespace-path= command line
+          option, which may be used to make a container join an existing
+          network namespace, by specifying a path to a "netns" file.
+
+        Contributions from: Alan Jenkins, Alan Robertson, Alessandro Ghedini,
+        Andrew Jeddeloh, Antonio Rojas, Ari, asavah, bleep_blop, Carsten
+        Strotmann, Christian Brauner, Christian Hesse, Clinton Roy, Collin
+        Eggert, Cong Wang, Daniel Black, Daniel Lockyer, Daniel Rusek, Dimitri
+        John Ledkov, Dmitry Rozhkov, Dongsu Park, Edward A. James, Evgeny
+        Vereshchagin, Florian Klink, Franck Bui, Gwendal Grignou, Hans de
+        Goede, Harald Hoyer, Hristo Venev, Iago López Galeiras, Ikey Doherty,
+        Jakub Wilk, Jérémy Rosen, Jiahui Xie, John Lin, José Bollo, Josef
+        Andersson, juga0, Krzysztof Nowicki, Kyle Walker, Lars Karlitski, Lars
+        Kellogg-Stedman, Lauri Tirkkonen, Lennart Poettering, Lubomir Rintel,
+        Luca Bruno, Lucas Werkmeister, Lukáš Nykrýn, Lukáš Říha, Lukasz
+        Rubaszewski, Maciej S. Szmigiero, Mantas Mikulėnas, Marcus Folkesson,
+        Martin Steuer, Mathieu Trudel-Lapierre, Matija Skala,
+        Matthias-Christian Ott, Max Resch, Michael Biebl, Michael Vogt, Michal
+        Koutný, Michal Sekletar, Mike Gilbert, Muhammet Kara, Neil Brown, Olaf
+        Hering, Ondrej Kozina, Patrik Flykt, Patryk Kocielnik, Peter Hutterer,
+        Piotr Drąg, Razvan Cojocaru, Robin McCorkell, Roland Hieber, Saran
+        Tunyasuvunakool, Sergey Ptashnick, Shawn Landden, Shuang Liu, Simon
+        Arlott, Simon Peeters, Stanislav Angelovič, Stefan Agner, Susant
+        Sahani, Sylvain Plantefève, Thomas Blume, Thomas Haller, Tiago Salem
+        Herrmann, Tinu Weber, Tom Stellard, Topi Miettinen, Torsten Hilbrich,
+        Vito Caputo, Vladislav Vishnyakov, WaLyong Cho, Yu Watanabe, Zbigniew
+        Jędrzejewski-Szmek, Zeal Jagannatha
+
+        — Berlin, 2017-12-14
+

 CHANGES WITH 235:
 
 CHANGES WITH 235:
 

+        * INCOMPATIBILITY: systemd-logind.service and other long-running
+          services now run inside an IPv4/IPv6 sandbox, prohibiting them any IP
+          communication with the outside. This generally improves security of
+          the system, and is in almost all cases a safe and good choice, as
+          these services do not and should not provide any network-facing
+          functionality. However, systemd-logind uses the glibc NSS API to
+          query the user database. This creates problems on systems where NSS
+          is set up to directly consult network services for user database
+          lookups. In particular, this creates incompatibilities with the
+          "nss-nis" module, which attempts to directly contact the NIS/YP
+          network servers it is configured for, and will now consistently
+          fail. In such cases, it is possible to turn off IP sandboxing for
+          systemd-logind.service (set IPAddressDeny= in its [Service] section
+          to the empty string, via a .d/ unit file drop-in). Downstream
+          distributions might want to update their nss-nis packaging to include
+          such a drop-in snippet, accordingly, to hide this incompatibility
+          from the user. Another option is to make use of glibc's nscd service
+          to proxy such network requests through a privilege-separated, minimal
+          local caching daemon, or to switch to more modern technologies such
+          sssd, whose NSS hook-ups generally do not involve direct network
+          access. In general, we think it's definitely time to question the
+          implementation choices of nss-nis, i.e. whether it's a good idea
+          today to embed a network-facing loadable module into all local
+          processes that need to query the user database, including the most
+          trivial and benign ones, such as "ls". For more details about
+          IPAddressDeny= see below.
+

         * A new modprobe.d drop-in is now shipped by default that sets the
           bonding module option max_bonds=0. This overrides the kernel default,
           to avoid conflicts and ambiguity as to whether or not bond0 should be
         * A new modprobe.d drop-in is now shipped by default that sets the
           bonding module option max_bonds=0. This overrides the kernel default,
           to avoid conflicts and ambiguity as to whether or not bond0 should be


@@ -12,27 +264,21 @@ CHANGES WITH 235:
           bond0 interface using systemd-networkd.
 
         * systemd-analyze gained new verbs "get-log-level" and "get-log-target"
           bond0 interface using systemd-networkd.
 
         * systemd-analyze gained new verbs "get-log-level" and "get-log-target"

-          which print the logging level and target of the system manager,
-          respectively. They complement the existing "set-log-level" and
-          "set-log-target" verbs, which can be used to change those values.
-
-        * systemd-networkd .network DHCP setting UseMTU default has changed
-          from false to true. Meaning, DHCP server advertised MTU setting is
-          now applied by default. This resolves networking issues on low-mtu
-          networks.
+          which print the logging level and target of the system manager. They
+          complement the existing "set-log-level" and "set-log-target" verbs
+          used to change those values.

 
         * journald.conf gained a new boolean setting ReadKMsg= which defaults
           to on. If turned off kernel log messages will not be read by
 
         * journald.conf gained a new boolean setting ReadKMsg= which defaults
           to on. If turned off kernel log messages will not be read by

-          systemd-journald and not be included in the logs. It also gained a
-          new setting LineMax= for configuring the maximum line length to allow
-          when converting STDOUT/STDERR log streams into individual log
-          records. The new default for this value is 48K, up from the previous
-          hardcoded 4K.
+          systemd-journald or included in the logs. It also gained a new
+          setting LineMax= for configuring the maximum line length in
+          STDOUT/STDERR log streams. The new default for this value is 48K, up
+          from the previous hardcoded 2048.

 
 

-        * A new setting RuntimeDirectoryPreserve= for units has been added,
-          which allows more detailed control of what to do with a runtime
-          directory configured with RuntimeDirectory= (i.e. a directory below
-          /run or $XDG_RUNTIME_DIR) after a unit is stopped.
+        * A new unit setting RuntimeDirectoryPreserve= has been added, which
+          allows more detailed control of what to do with a runtime directory
+          configured with RuntimeDirectory= (i.e. a directory below /run or
+          $XDG_RUNTIME_DIR) after a unit is stopped.

 
         * The RuntimeDirectory= setting for units gained support for creating
           deeper subdirectories below /run or $XDG_RUNTIME_DIR, instead of just
 
         * The RuntimeDirectory= setting for units gained support for creating
           deeper subdirectories below /run or $XDG_RUNTIME_DIR, instead of just


@@ -41,7 +287,7 @@ CHANGES WITH 235:
         * Units gained new options StateDirectory=, CacheDirectory=,
           LogsDirectory= and ConfigurationDirectory= which are closely related
           to RuntimeDirectory= but manage per-service directories below
         * Units gained new options StateDirectory=, CacheDirectory=,
           LogsDirectory= and ConfigurationDirectory= which are closely related
           to RuntimeDirectory= but manage per-service directories below

-          /var/lib, /var/cache, /var/log and /etc. By making use of this it is
+          /var/lib, /var/cache, /var/log and /etc. By making use of them it is

           possible to write unit files which when activated automatically gain
           properly owned service specific directories in these locations, thus
           making unit files self-contained and increasing compatibility with
           possible to write unit files which when activated automatically gain
           properly owned service specific directories in these locations, thus
           making unit files self-contained and increasing compatibility with


@@ -49,7 +295,10 @@ CHANGES WITH 235:
           unpopulated at boot. Matching these new settings there's also
           StateDirectoryMode=, CacheDirectoryMode=, LogsDirectoryMode=,
           ConfigurationDirectoryMode= for configuring the access mode of these
           unpopulated at boot. Matching these new settings there's also
           StateDirectoryMode=, CacheDirectoryMode=, LogsDirectoryMode=,
           ConfigurationDirectoryMode= for configuring the access mode of these

-          directories.
+          directories. These settings are particularly useful in combination
+          with DynamicUser=yes as they provide secure, properly-owned,
+          writable, and stateful locations for storage, excluded from the
+          sandbox that such services live in otherwise.

 
         * Automake support has been removed from this release. systemd is now
           Meson-only.
 
         * Automake support has been removed from this release. systemd is now
           Meson-only.


@@ -95,20 +344,20 @@ CHANGES WITH 235:
           configuring TCP/IPv6 hardware segmentation offload.
 
         * The IPv6 RA sender implementation may now optionally send out RDNSS
           configuring TCP/IPv6 hardware segmentation offload.
 
         * The IPv6 RA sender implementation may now optionally send out RDNSS

-          and RDNSSL records for supplying DNS configuration to peers.
+          and RDNSSL records to supply DNS configuration to peers.

 
         * systemd-nspawn gained support for a new --system-call-filter= command
 
         * systemd-nspawn gained support for a new --system-call-filter= command

-          line option for adding/removing entries in the default system call
-          filter it applies. Moreover systemd-nspawn has been changed to
+          line option for adding and removing entries in the default system
+          call filter it applies. Moreover systemd-nspawn has been changed to

           implement a system call whitelist instead of a blacklist.
 
         * systemd-run gained support for a new --pipe command line option. If
           used the STDIN/STDOUT/STDERR file descriptors passed to systemd-run
           are directly passed on to the activated transient service
           implement a system call whitelist instead of a blacklist.
 
         * systemd-run gained support for a new --pipe command line option. If
           used the STDIN/STDOUT/STDERR file descriptors passed to systemd-run
           are directly passed on to the activated transient service

-          binary. This allows invoking arbitrary processes as systemd services
-          (for example to take benefit of dependency management, accounting
-          management, resource management or log management that is done
-          automatically for services) — while still allowing them to be
+          executable. This allows invoking arbitrary processes as systemd
+          services (for example to take benefit of dependency management,
+          accounting management, resource management or log management that is
+          done automatically for services) — while still allowing them to be

           integrated in a classic UNIX shell pipeline.
 
         * When a service sends RELOAD=1 via sd_notify() and reload propagation
           integrated in a classic UNIX shell pipeline.
 
         * When a service sends RELOAD=1 via sd_notify() and reload propagation


@@ -121,8 +370,8 @@ CHANGES WITH 235:
           each time the service is restarted due to Restart=, and may be
           queried using "systemctl show -p NRestarts …".
 
           each time the service is restarted due to Restart=, and may be
           queried using "systemctl show -p NRestarts …".
 

-        * New system call filter groups @setuid, @memlock, @signal and
-          @timer have been added, for usage with SystemCallFilter=
+        * New system call filter groups @aio, @sync, @chown, @setuid, @memlock,
+          @signal and @timer have been added, for usage with SystemCallFilter=

           in unit files and the new --system-call-filter= command line option
           of systemd-nspawn (see above).
 
           in unit files and the new --system-call-filter= command line option
           of systemd-nspawn (see above).
 


@@ -146,8 +395,7 @@ CHANGES WITH 235:
 
         * A new special target "getty-pre.target" has been added, which is
           ordered before all text logins, and may be used to order services
 
         * A new special target "getty-pre.target" has been added, which is
           ordered before all text logins, and may be used to order services

-          before, that shall run before these textual logins acquire access to
-          the console.
+          before textual logins acquire access to the console.

 
         * systemd will now attempt to load the virtio-rng.ko kernel module very
           early on if a VM environment supporting this is detected. This should
 
         * systemd will now attempt to load the virtio-rng.ko kernel module very
           early on if a VM environment supporting this is detected. This should


@@ -155,15 +403,15 @@ CHANGES WITH 235:
 
         * A _netdev option is now supported in /etc/crypttab that operates in a
           similar way as the same option in /etc/fstab: it permits configuring
 
         * A _netdev option is now supported in /etc/crypttab that operates in a
           similar way as the same option in /etc/fstab: it permits configuring

-          encrypted devices that need to be ordered after the network coming
-          up. Following this logic, two new special targets
+          encrypted devices that need to be ordered after the network is up.
+          Following this logic, two new special targets

           remote-cryptsetup-pre.target and remote-cryptsetup.target have been
           remote-cryptsetup-pre.target and remote-cryptsetup.target have been

-          added that are to cryptsetup.target what
-          remote-fs.target/remote-fs-pre.target are to local-fs.target.
+          added that are to cryptsetup.target what remote-fs.target and
+          remote-fs-pre.target are to local-fs.target.

 
         * Service units gained a new UnsetEnvironment= setting which permits
 
         * Service units gained a new UnsetEnvironment= setting which permits

-          unsetting specific environment variables for specific services that
-          are normally passed to it (for example in order to mask out locale
+          unsetting specific environment variables for services that are
+          normally passed to it (for example in order to mask out locale

           settings for specific services that can't deal with it).
 
         * Units acquired a new boolean option IPAccounting=. When turned on, IP
           settings for specific services that can't deal with it).
 
         * Units acquired a new boolean option IPAccounting=. When turned on, IP


@@ -181,8 +429,8 @@ CHANGES WITH 235:
           enforced on every single IPv4 and IPv6 socket created by any process
           of the service unit, and apply to ingress as well as egress traffic.
 
           enforced on every single IPv4 and IPv6 socket created by any process
           of the service unit, and apply to ingress as well as egress traffic.
 

-        * If CPUAccounting= or IPAccounting= is turned on for a unit a new,
-          recognizable log message is generated each time the unit is stopped,
+        * If CPUAccounting= or IPAccounting= is turned on for a unit a new
+          structured log message is generated each time the unit is stopped,

           containing information about the consumed resources of this
           invocation.
 
           containing information about the consumed resources of this
           invocation.
 


@@ -190,39 +438,65 @@ CHANGES WITH 235:
           used to control how the kernel keyring is set up for executed
           processes.
 
           used to control how the kernel keyring is set up for executed
           processes.
 

+        * "systemctl poweroff", "systemctl reboot", "systemctl halt",
+          "systemctl kexec" and "systemctl exit" are now always asynchronous in
+          behaviour (that is: these commands return immediately after the
+          operation was enqueued instead of waiting for the operation to
+          complete). Previously, "systemctl poweroff" and "systemctl reboot"
+          were asynchronous on systems using systemd-logind (i.e. almost
+          always, and like they were on sysvinit), and the other three commands
+          were unconditionally synchronous. With this release this is cleaned
+          up, and callers will see the same asynchronous behaviour on all
+          systems for all five operations.
+
+        * systemd-logind gained new Halt() and CanHalt() bus calls for halting
+          the system.
+

         * .timer units now accept calendar specifications in other timezones
           than UTC or the local timezone.
 
         * The tmpfiles snippet var.conf has been changed to create
         * .timer units now accept calendar specifications in other timezones
           than UTC or the local timezone.
 
         * The tmpfiles snippet var.conf has been changed to create

-          /var/log/btmp with access mode 0660 instead of 0600. It has been
-          owned by the "utmp" group already, and it appears to be generally
-          understood that members of "utmp" can modify/flush the
-          utmp/wtmp/lastlog/btmp databases. Previously this was implemented
-          correctly for all these database excepts btmp, which has been opened
-          up like this now too. Note that while the other databases are
-          world-readable (i.e. 0644), btmp is not and remains more restrictive.
+          /var/log/btmp with access mode 0660 instead of 0600. It was owned by
+          the "utmp" group already, and it appears to be generally understood
+          that members of "utmp" can modify/flush the utmp/wtmp/lastlog/btmp
+          databases. Previously this was implemented correctly for all these
+          databases excepts btmp, which has been opened up like this now
+          too. Note that while the other databases are world-readable
+          (i.e. 0644), btmp is not and remains more restrictive.
+
+        * The systemd-resolve tool gained a new --reset-server-features
+          switch. When invoked like this systemd-resolved will forget
+          everything it learnt about the features supported by the configured
+          upstream DNS servers, and restarts the feature probing logic on the
+          next resolver look-up for them at the highest feature level
+          again.
+
+        * The status dump systemd-resolved sends to the logs upon receiving
+          SIGUSR1 now also includes information about all DNS servers it is
+          configured to use, and the features levels it probed for them.

 
         Contributions from: Abdó Roig-Maranges, Alan Jenkins, Alexander
         Kuleshov, Andreas Rammhold, Andrew Jeddeloh, Andrew Soutar, Ansgar
 
         Contributions from: Abdó Roig-Maranges, Alan Jenkins, Alexander
         Kuleshov, Andreas Rammhold, Andrew Jeddeloh, Andrew Soutar, Ansgar

-        Burchardt, b1tninja, bengal, Benjamin Berg, Benjamin Robin, Charles
-        Huber, Christian Hesse, Daniel Berrange, Daniel Mack, Daniel Rusek,
-        dasj19, Davide Cavalca, Dimitri John Ledkov, Diogo Pereira, Djalal
-        Harouni, dkg, dmig, Dmitry Torokhov, ettavolt, Evgeny Vereshchagin,
-        Fabio Kung, Felipe Sateler, Franck Bui, g0tar, Hans de Goede, Harald
-        Hoyer, Insun Pyo, Ivan Kurnosov, Ivan Shapovalov, Jakub Wilk, Jan
-        Synacek, Jason Gunthorpe, Jeremy Bicha, Jérémy Rosen, John Lin,
-        jonasBoss, Jonathan Lebon, Jonathan Teh, Jon Ringle, Jörg Thalheim,
-        Jouke Witteveen, juga0, Justin Michaud, Kai-Heng Feng, Lennart
-        Poettering, Lion Yang, Luca Bruno, Lucas Werkmeister, Lukáš Nykrýn,
-        Marcel Hollerbach, Marcus Lundblad, Martin Pitt, Michael Biebl, Michael
-        Grzeschik, Michal Sekletar, Mike Gilbert, Neil Brown, Nicolas Iooss,
-        Patrik Flykt, pEJipE, Russell Stuart, S. Fan, Shengyao Xue, Stefan
-        Pietsch, Susant Sahani, Tejun Heo, Thomas Miller, Thomas Sailer, Tobias
-        Hunger, Tom Gundersen, Tommi Rantala, Topi Miettinen, Torstein Husebø,
-        userwithuid, Vito Caputo, vliaskov, WaLyong Cho, William Douglas, Xiang
+        Burchardt, Beniamino Galvani, Benjamin Berg, Benjamin Robin, Charles
+        Huber, Christian Hesse, Daniel Berrange, Daniel Kahn Gillmor, Daniel
+        Mack, Daniel Rusek, Daniel Șerbănescu, Davide Cavalca, Dimitri John
+        Ledkov, Diogo Pereira, Djalal Harouni, Dmitriy Geels, Dmitry Torokhov,
+        ettavolt, Evgeny Vereshchagin, Fabio Kung, Felipe Sateler, Franck Bui,
+        Hans de Goede, Harald Hoyer, Insun Pyo, Ivan Kurnosov, Ivan Shapovalov,
+        Jakub Wilk, Jan Synacek, Jason Gunthorpe, Jeremy Bicha, Jérémy Rosen,
+        John Lin, jonasBoss, Jonathan Lebon, Jonathan Teh, Jon Ringle, Jörg
+        Thalheim, Jouke Witteveen, juga0, Justin Capella, Justin Michaud,
+        Kai-Heng Feng, Lennart Poettering, Lion Yang, Luca Bruno, Lucas
+        Werkmeister, Lukáš Nykrýn, Marcel Hollerbach, Marcus Lundblad, Martin
+        Pitt, Michael Biebl, Michael Grzeschik, Michal Sekletar, Mike Gilbert,
+        Neil Brown, Nicolas Iooss, Patrik Flykt, pEJipE, Piotr Drąg, Russell
+        Stuart, S. Fan, Shengyao Xue, Stefan Pietsch, Susant Sahani, Tejun Heo,
+        Thomas Miller, Thomas Sailer, Tobias Hunger, Tomasz Pala, Tom
+        Gundersen, Tommi Rantala, Topi Miettinen, Torstein Husebø, userwithuid,
+        Vasilis Liaskovitis, Vito Caputo, WaLyong Cho, William Douglas, Xiang

         Fan, Yu Watanabe, Zbigniew Jędrzejewski-Szmek
 
         Fan, Yu Watanabe, Zbigniew Jędrzejewski-Szmek
 

-        — Berlin, 2017-09-XX
+        — Berlin, 2017-10-06

 
 CHANGES WITH 234:
 
 
 CHANGES WITH 234: