systemd System and Service Manager
-CHANGES WITH 246 in spe:
+CHANGES WITH 246:
+
+ * The service manager gained basic support for cgroup v2 freezer. Units
+ can now be suspended or resumed either using new systemctl verbs,
+ freeze and thaw respectively, or via D-Bus.
+
+ * PID 1 may now automatically load pre-compiled AppArmor policies from
+ /etc/apparmor/earlypolicy during early boot.
+
+ * The CPUAffinity= setting in service unit files now supports a new
+ special value "numa" that causes the CPU affinity masked to be set
+ based on the NUMA mask.
+
+ * systemd will now log about all left-over processes remaining in a
+ unit when the unit is stopped. It will now warn about services using
+ KillMode=none, as this is generally an unsafe thing to make use of.
+
+ * Two new unit file settings
+ ConditionPathIsEncrypted=/AssertPathIsEncrypted= have been
+ added. They may be used to check whether a specific file system path
+ resides on a block device that is encrypted on the block level
+ (i.e. using dm-crypt/LUKS).
+
+ * Another pair of new settings ConditionEnvironment=/AssertEnvironment=
+ has been added that may be used for simple environment checks. This
+ is particularly useful when passing in environment variables from a
+ container manager (or from PAM in case of the systemd --user
+ instance).
+
+ * .service unit files now accept a new setting CoredumpFilter= which
+ allows configuration of the memory sections coredumps of the
+ service's processes shall include.
+
+ * .mount units gained a new ReadWriteOnly= boolean option. If set
+ it will not be attempted to mount a file system read-only if mounting
+ in read-write mode doesn't succeed. An option x-systemd.rw-only is
+ available in /etc/fstab to control the same.
+
+ * .socket units gained a new boolean setting PassPacketInfo=. If
+ enabled, the kernel will attach additional per-packet metadata to all
+ packets read from the socket, as an ancillary message. This controls
+ the IP_PKTINFO, IPV6_RECVPKTINFO, NETLINK_PKTINFO socket options,
+ depending on socket type.
+
+ * .service units gained a new setting RootHash= which may be used to
+ specify the root hash for verity enabled disk images which are
+ specified in RootImage=. RootVerity= may be used to specify a path to
+ the Verity data matching a RootImage= file system. (The latter is
+ only useful for images that do not contain the Verity data embedded
+ into the same image that carries a GPT partition table following the
+ Discoverable Partition Specification). Similarly, systemd-nspawn
+ gained a new switch --verity-data= that takes a path to a file with
+ the verity data of the disk image supplied in --image=, if the image
+ doesn't contain the verity data itself.
+
+ * .service units gained a new setting RootHashSignature= which takes
+ either a base64 encoded PKCS#7 signature of the root hash specified
+ with RootHash=, or a path to a file to read the signature from. This
+ allows validation of the root hash against public keys available in
+ the kernel keyring, and is only supported on recent kernels
+ (>= 5.4)/libcryptsetup (>= 2.30). A similar switch has been added to
+ systemd-nspawn and systemd-dissect (--root-hash-sig=). Support for
+ this mechanism has also been added to systemd-veritysetup.
+
+ * .service unit files gained two new options
+ TimeoutStartFailureMode=/TimeoutStopFailureMode= that may be used to
+ tune behaviour if a start or stop timeout is hit, i.e. whether to
+ terminate the service with SIGTERM, SIGABRT or SIGKILL.
+
+ * Most options in systemd that accept hexadecimal values prefixed with
+ 0x in additional to the usual decimal notation now also support octal
+ notation when the 0o prefix is used and binary notation if the 0b
+ prefix is used.
+
+ * Unit files, tmpfiles.d/ snippets, sysusers.d/ snippets and other
+ configuration files that support specifier expansion learnt six new
+ specifiers: %a resolves to the current architecture, %o/%w/%B/%W
+ resolve to the various ID fields from /etc/os-release, %l resolves to
+ the "short" hostname of the system, i.e. the hostname configured in
+ the kernel truncated at the first dot.
+
+ * Support for the .include syntax in unit files has been removed. The
+ concept has been obsolete for 6 years and we started warning about
+ its pending removal 2 years ago (also see NEWS file below). It's
+ finally gone now.
+
+ * StandardError= and StandardOutput= in unit files no longer support
+ the "syslog" and "syslog-console" switches. They were long removed
+ from the documentation, but will now result in warnings when used,
+ and be converted to "journal" and "journal+console" automatically.
+
+ * If the service setting User= is set to the "nobody" user, a warning
+ message is now written to the logs (but the value is nonetheless
+ accepted). Setting User=nobody is unsafe, since the primary purpose
+ of the "nobody" user is to own all files whose owner cannot be mapped
+ locally. It's in particular used by the NFS subsystem and in user
+ namespacing. By running a service under this user's UID it might get
+ read and even write access to all these otherwise unmappable files,
+ which is quite likely a major security problem.
+
+ * A new kernel command line option systemd.hostname= has been added
+ that allows controlling the hostname that is initialized early during
+ boot.
+
+ * A kernel command line option "udev.blockdev_read_only" has been
+ added. If specified all hardware block devices that show up are
+ immediately marked as read-only by udev. This option is useful for
+ making sure that a specific boot under no circumstances modifies data
+ on disk. Use "blockdev --setrw" to undo the effect of this, per
+ device.
+
+ * A new boolean kernel command line option systemd.swap= has been
+ added, which may be used to turn off automatic activation of swap
+ devices listed in /etc/fstab.
+
+ * New kernel command line options systemd.condition-needs-update= and
+ systemd.condition-first-boot= have been added, which override the
+ result of the ConditionNeedsUpdate= and ConditionFirstBoot=
+ conditions.
+
+ * A new kernel command line option systemd.clock-usec= has been added
+ that allows setting the system clock to the specified time in µs
+ since Jan 1st, 1970 early during boot. This is in particular useful
+ in order to make test cases more reliable.
+
* The fs.suid_dumpable sysctl is set to 2 / "suidsafe". This allows
systemd-coredump to save core files for suid processes. When saving
the core file, systemd-coredump will use the effective uid and gid of
the process that faulted.
+ * The /sys/module/kernel/parameters/crash_kexec_post_notifiers file is
+ now automatically set to "Y" at boot, in order to enable pstore
+ generation for collection with systemd-pstore.
+
+ * A new 'hwdb' file has been added that collects information about PCI
+ and USB devices that correctly support auto-suspend, on top of the
+ databases for this we import from the ChromiumOS project. If you have
+ a device that supports auto-suspend correctly and where it should be
+ enabled by default, please submit a patch that adds it to the
+ database (see /usr/lib/udev/hwdb.d/60-autosuspend.hwdb).
+
+ * systemd-udevd gained the new configuration option timeout_signal= as well
+ as a corresponding kernel command line option udev.timeout_signal=.
+ The option can be used to configure the UNIX signal that the main
+ daemon sends to the worker processes on timeout. Setting the signal
+ to SIGABRT is useful for debugging.
+
+ * .link files managed by systemd-udevd gained options RxFlowControl=,
+ TxFlowControl=, AutoNegotiationFlowControl= in the [Link] section, in
+ order to configure various flow control parameters. They also gained
+ RxMiniBufferSize= and RxJumboBufferSize= in order to configure jumbo
+ frame ring buffer sizes.
+
+ * networkd.conf gained a new boolean setting ManageForeignRoutes=. If
+ enabled systemd-networkd manages all routes configured by other tools.
+
+ * .network files managed by systemd-networkd gained a new section
+ [SR-IOV], in order to configure SR-IOV capable network devices.
+
+ * systemd-networkd's [IPv6Prefix] section in .network files gained a
+ new boolean setting Assign=. If enabled an address from the prefix is
+ automatically assigned to the interface.
+
+ * systemd-networkd's [Network] section gained a new setting
+ IPv6PDSubnetId= that allows explicit configuration of the preferred
+ subnet that networkd's Prefix Delegation logic assigns to interfaces.
+
+ * systemd-networkd's [Network] section gained a new setting
+ IPv4AcceptLocal=. If enabled the interface accepts packets with local
+ source addresses.
+
+ * systemd-networkd gained support for configuring the HTB queuing
+ discipline in the [HierarchyTokenBucket] and
+ [HierarchyTokenBucketClass] sections. Similar the "pfifo" qdisc may
+ be configured in the [PFIFO] section, "GRED" in
+ [GenericRandomEarlyDetection], "SFB" in [StochasticFairBlue], "cake"
+ in [CAKE], "PIE" in [PIE], "DRR" in [DeficitRoundRobinScheduler] and
+ [DeficitRoundRobinSchedulerClass], "BFIFO" in [BFIFO],
+ "PFIFOHeadDrop" in [PFIFOHeadDrop], "PFIFOFast" in [PFIFOFast], "HHF"
+ in [HeavyHitterFilter], "ETS" in [EnhancedTransmissionSelection] and
+ "QFQ" in [QuickFairQueueing] and [QuickFairQueueingClass].
+
+ * systemd-networkd gained support for a new Termination= setting in the
+ [CAN] section for configuring the termination resistor. It also
+ gained a new ListenOnly= setting for controlling whether to only
+ listen on CAN interfaces, without interfering with traffic otherwise
+ (which is useful for debugging/monitoring CAN network
+ traffic). DataBitRate=, DataSamplePoint=, FDMode=, FDNonISO= have
+ been added to configure various CAN-FD aspects.
+
+ * systemd-networkd's [DHCPv6] section gained a new option WithoutRA=.
+ When enabled, DHCPv6 will be attempted right-away without requiring an
+ Router Advertisement packet suggesting it first (i.e. without the 'M'
+ or 'O' flags set). The [IPv6AcceptRA] section gained a boolean option
+ DHCPv6Client= that may be used to turn off the DHCPv6 client even if
+ the RA packets suggest it.
+
+ * systemd-networkd's [DHCPv4] section gained a new setting UseGateway=
+ which may be used to turn off use of the gateway information provided
+ by the DHCP lease. A new FallbackLeaseLifetimeSec= setting may be
+ used to configure how to process leases that lack a lifetime option.
+
+ * systemd-networkd's [DHCPv4] and [DHCPServer] sections gained a new
+ setting SendVendorOption= allowing configuration of additional vendor
+ options to send in the DHCP requests/responses. The [DHCPv6] section
+ gained a new SendOption= setting for sending arbitrary DHCP
+ options. RequestOptions= has been added to request arbitrary options
+ from the server. UserClass= has been added to set the DHCP user class
+ field.
+
+ * systemd-networkd's [DHCPServer] section gained a new set of options
+ EmitPOP3=/POP3=, EmitSMTP=/SMTP=, EmitLPR=/LPR= for including server
+ information about these three protocols in the DHCP lease. It also
+ gained support for including "MUD" URLs ("Manufacturer Usage
+ Description"). Support for "MUD" URLs was also added to the LLDP
+ stack, configurable in the [LLDP] section in .network files.
+
+ * The Mode= settings in [MACVLAN] and [MACVTAP] now support 'source'
+ mode. Also, the sections now support a new setting SourceMACAddress=.
+
+ * systemd-networkd's .netdev files now support a new setting
+ VLANProtocol= in the [Bridge] section that allows configuration of
+ the VLAN protocol to use.
+
+ * systemd-networkd supports a new Group= setting in the [Link] section
+ of the .network files, to control the link group.
+
+ * systemd-networkd's [Network] section gained a new
+ IPv6LinkLocalAddressGenerationMode= setting, which specifies how IPv6
+ link local address is generated.
+
+ * A new default .network file is now shipped that matches TUN/TAP
+ devices that begin with "vt-" in their name. Such interfaces will
+ have IP routing onto the host links set up automatically. This is
+ supposed to be used by VM managers to trivially acquire a network
+ interface which is fully set up for host communication, simply by
+ carefully picking an interface name to use.
+
+ * A new boolean option AssignAcquiredDelegatedPrefixAddress= has been
+ added to the [DHCPv6] section of .network files. If enabled (which is
+ the default) an address from any acquired delegated prefix is
+ automatically chosen and assigned to the interface.
+
+ * systemd-networkd's [DHCPv6] section gained a new setting RouteMetric=
+ which sets the route priority for routes specified by the DHCP server.
+
+ * systemd-networkd's [DHCPv6] section gained a new setting VendorClass=
+ which configures the vendor class information sent to DHCP server.
+
+ * The BlackList= settings in .network files' [DHCPv4] and
+ [IPv6AcceptRA] sections have been renamed DenyList=. The old names
+ are still understood to provide compatibility.
+
+ * networkctl gained the new "forcerenew" command for forcing all DHCP
+ server clients to renew their lease. The interface "status" output
+ will now show numerous additional fields of information about an
+ interface. There are new "up" and "down" commands to bring specific
+ interfaces up or down.
+
+ * systemd-resolved's DNS= configuration option now optionally accepts
+ DNS server addresses suffixed by "#" followed by a host name. If
+ used, the DNS-over-TLS certificate is validated to match the
+ specified hostname.
+
+ * systemd-resolved may be configured to forward single-label DNS names.
+ This is not standard-conformant, but may make sense in setups where
+ public DNS servers are not used.
+
+ * systemd-resolved's DNS-over-TLS support gained SNI validation.
+
+ * systemd-nspawn's --resolv-conf= switch gained a number of new
+ supported values. Specifically, options starting with "replace-" are
+ like those prefixed "copy-" but replace any existing resolv.conf
+ file. And options ending in "-uplink" and "-stub" can now be used to
+ propagate other flavours of resolv.conf into the container (as
+ defined by systemd-resolved).
+
+ * The various programs included in systemd can now optionally output
+ their log messages on stderr prefixed with a timestamp, controlled by
+ the $SYSTEMD_LOG_TIME environment variable.
+
+ * systemctl gained a new "-P" switch that is a shortcut for "--value
+ --property=…".
+
* "systemctl list-units" and "systemctl list-machines" no longer hide
their first output column with --no-legend. To hide the first column,
use --plain.
- * The service manager gained basic support for cgroup v2 freezer. Units
- can now be suspended or resumed either using new systemctl verbs,
- freeze and thaw respectively, or via D-Bus.
+ * "systemctl reboot" takes the option "--reboot-argument=".
+ The optional positional argument to "systemctl reboot" is now
+ being deprecated in favor of this option.
+
+ * systemd-run gained a new switch --slice-inherit. If specified the
+ unit it generates is placed in the same slice as the systemd-run
+ process itself.
+
+ * systemd-journald gained support for zstd compression of large fields
+ in journal files. The hash tables in journal files have been hardened
+ against hash collisions. This is an incompatible change and means
+ that journal files created with new systemd versions are not readable
+ with old versions. If the $SYSTEMD_JOURNAL_KEYED_HASH boolean
+ environment variable for systemd-journald.service is set to 0 this
+ new hardening functionality may be turned off, so that generated
+ journal files remain compatible with older journalctl
+ implementations.
+
+ * journalctl will now include a clickable link in the default output for
+ each log message for which an URL with further documentation is
+ known. This is only supported on terminal emulators that support
+ clickable hyperlinks, and is turned off if a pager is used (since
+ "less" still doesn't support hyperlinks,
+ unfortunately). Documentation URLs may be included in log messages
+ either by including a DOCUMENTATION= journal field in it, or by
+ associating a journal message catalog entry with the log message's
+ MESSAGE_ID, which then carries a "Documentation:" tag.
+
+ * journald.conf gained a new boolean setting Audit= that may be used to
+ control whether systemd-journald will enable audit during
+ initialization.
+
+ * when systemd-journald's log stream is broken up into multiple lines
+ because the PID of the sender changed this is indicated in the
+ generated log records via the _LINE_BREAK=pid-change field.
+
+ * journalctl's "-o cat" output mode will now show one or more journal
+ fields specified with --output-fields= instead of unconditionally
+ MESSAGE=. This is useful to retrieve a very specific set of fields
+ without any decoration.
+
+ * coredumpctl gained a new --file= switch, matching the same one in
+ journalctl: a specific journal file may be specified to read the
+ coredump data from.
+
+ * coredumps collected by systemd-coredump may now be compressed using
+ the zstd algorithm.
+
+ * systemd-binfmt gained a new switch --unregister for unregistering all
+ registered entries at once. This is now invoked automatically at
+ shutdown, so that binary formats registered with the "F" flag will
+ not block clean file system unmounting.
+
+ * systemd-notify's --pid= switch gained new values: "parent", "self",
+ "auto" for controlling which PID to send to the service manager: the
+ systemd-notify process' PID, or the one of the process invoking it.
+
+ * systemd-logind's Session bus object learnt a new method call
+ SetType() for temporarily updating the session type of an already
+ allocated session. This is useful for upgrading tty sessions to
+ graphical ones once a compositor is invoked.
+
+ * systemd-socket-proxy gained a new switch --exit-idle-time= for
+ configuring an exit-on-idle time.
+
+ * systemd-repart's --empty= setting gained a new value "create". If
+ specified a new empty regular disk image file is created under the
+ specified name. Its size may be specified with the new --size=
+ option. The latter is also supported without the "create" mode, in
+ order to grow existing disk image files to the specified size. These
+ two new options are useful when creating or manipulating disk images
+ instead of operating on actual block devices.
+
+ * systemd-repart drop-ins now support a new UUID= setting to control
+ the UUID to assign to a newly created partition.
+
+ * systemd-repart's SizeMin= per-partition parameter now defaults to 10M
+ instead of 0.
+
+ * systemd-repart's Label= setting now support the usual, simple
+ specifier expansion.
+
+ * systemd-homed's LUKS backend gained the ability to discard empty file
+ system blocks automatically when the user logs out. This is enabled
+ by default to ensure that home directories take minimal space when
+ logged out but get full size guarantees when logged in. This may be
+ controlled with the new --luks-offline-discard= switch to homectl.
+
+ * If systemd-homed detects that /home/ is encrypted as a whole it will
+ now default to the directory or subvolume backends instead of the
+ LUKS backend, in order to avoid double encryption. The default
+ storage and file system may now be configured explicitly, too, via
+ the new /etc/systemd/homed.conf configuration file.
+
+ * systemd-homed now supports unlocking home directories with FIDO2
+ security tokens that support the 'hmac-secret' extension, in addition
+ to the existing support for PKCS#11 security token unlocking
+ support. Note that many recent hardware security tokens support both
+ interfaces. The FIDO2 support is accessible via homectl's
+ --fido2-device= option.
+
+ * homectl's --pkcs11-uri= setting now accepts two special parameters:
+ if "auto" is specified and only one suitable PKCS#11 security token
+ is plugged in, its URL is automatically determined and enrolled for
+ unlocking the home directory. If "list" is specified a brief table of
+ suitable PKCS#11 security tokens is shown. Similar, the new
+ --fido2-device= option also supports these two special values, for
+ automatically selecting and listing suitable FIDO2 devices.
+
+ * The /etc/crypttab tmp option now optionally takes an argument
+ selecting the file system to use. Moreover, the default is now
+ changed from ext2 to ext4.
+
+ * There's a new /etc/crypttab option "keyfile-erase". If specified the
+ key file listed in the same line is removed after use, regardless if
+ volume activation was successful or not. This is useful if the key
+ file is only acquired transiently at runtime and shall be erased
+ before the system continues to boot.
+
+ * There's also a new /etc/crypttab option "try-empty-password". If
+ specified, before asking the user for a password it is attempted to
+ unlock the volume with an empty password. This is useful for
+ installing encrypted images whose password shall be set on first boot
+ instead of at installation time.
+
+ * systemd-cryptsetup will now attempt to load the keys to unlock
+ volumes with automatically from files in
+ /etc/cryptsetup-keys.d/<volume>.key and
+ /run/cryptsetup-keys.d/<volume>.key, if any of these files exist.
+
+ * systemd-cryptsetup may now activate Microsoft BitLocker volumes via
+ /etc/crypttab, during boot.
+
+ * logind.conf gained a new RuntimeDirectoryInodesMax= setting to
+ control the inode limit for the per-user $XDG_RUNTIME_DIR tmpfs
+ instance.
+
+ * A new generator systemd-xdg-autostart-generator has been added. It
+ generates systemd unit files from XDG autostart .desktop files, and
+ may be used to let the systemd user instance manage services that are
+ started automatically as part of the desktop session.
+
+ * "bootctl" gained a new verb "reboot-to-firmware" that may be used
+ to query and change the firmware's 'reboot into firmware' setup flag.
+
+ * systemd-firstboot gained a new switch --kernel-command-line= that may
+ be used to initialize the /etc/kernel/cmdline file of the image. It
+ also gained a new switch --root-password-hashed= which is like
+ --root-password= but accepts a pre-hashed UNIX password as
+ argument. The new option --delete-root-password may be used to unset
+ any password for the root user (dangerous!). A new --force option may
+ be used to override any already set settings with the parameters
+ specified on the command line (by default, the tool will not override
+ what has already been set before, i.e. is purely incremental).
+
+ * systemd-firstboot gained support for a new --image= switch, which is
+ similar to --root= but accepts the path to a disk image file, on
+ which it then operates.
+
+ * A new sd-path.h API has been added to libsystemd. It provides a
+ simple API for retrieving various search paths and primary
+ directories for various resources.
+
+ * A new call sd_notify_barrier() has been added to the sd-daemon.h
+ API. The call will block until all previously sent sd_notify()
+ messages have been processed by the service manager. This is useful
+ to remove races caused by a process already having disappeared at the
+ time a notification message is processed by the service manager,
+ making correct attribution impossible. The systemd-notify tool will
+ now make use of this call implicitly, but this can be turned off again
+ via the new --no-block switch.
+
+ * When sending a file descriptor (fd) to the service manager to keep
+ track of, using the sd_notify() mechanism, a new parameter FDPOLL=0
+ may be specified. If passed the service manager will refrain from
+ poll()ing on the file descriptor. Traditionally (and when the
+ parameter is not specified), the service manager will poll it for
+ POLLHUP or POLLERR events, and immediately close the fds in that
+ case.
+
+ * The service manager (PID1) gained a new D-Bus method call
+ SetShowStatus() which may be used to control whether it shall show
+ boot-time status output on the console. This method has a similar
+ effect to sending SIGRTMIN+20/SIGRTMIN+21 to PID 1.
+
+ * The sd-bus API gained a number of convenience functions that take
+ va_list arguments rather than "...". For example, there's now
+ sd_bus_call_methodv() to match sd_bus_call_method(). Those calls make
+ it easier to build wrappers that accept variadic arguments and want
+ to pass a ready va_list structure to sd-bus.
+
+ * sd-bus vtable entries can have a new SD_BUS_VTABLE_ABSOLUTE_OFFSET
+ flag which alters how the userdata pointer to pass to the callbacks
+ is determined. When the flag is set, the offset field is converted
+ as-is into a pointer, without adding it to the object pointer the
+ vtable is associated with.
+
+ * sd-bus now exposes four new functions:
+ sd_bus_interface_name_is_valid() + sd_bus_service_name_is_valid() +
+ sd_bus_member_name_is_valid() + sd_bus_object_path_is_valid() will
+ validate strings to check if they qualify as various D-Bus concepts.
+
+ * The sd-bus API gained the SD_BUS_METHOD_WITH_ARGS(),
+ SD_BUS_METHOD_WITH_ARGS_OFFSET() and SD_BUS_SIGNAL_WITH_ARGS() macros
+ that simplify adding argument names to D-Bus methods and signals.
+
+ * The man pages for the sd-bus and sd-hwdb APIs have been completed.
+
+ * Various D-Bus APIs of systemd daemons now have man pages that
+ document the methods, signals and properties.
+
+ * The expectations on user/group name syntax are now documented in
+ detail; documentation on how classic home directories may be
+ converted into home directories managed by homed has been added;
+ documentation regarding integration of homed/userdb functionality in
+ desktops has been added:
+
+ https://systemd.io/USER_NAMES
+ https://systemd.io/CONVERTING_TO_HOMED
+ https://systemd.io/USERDB_AND_DESKTOPS
+
+ * Documentation for the on-disk Journal file format has been updated
+ and has now moved to:
+
+ https://systemd.io/JOURNAL_FILE_FORMAT
+
+ * The interface for containers (https://systemd.io/CONTAINER_INTERFACE)
+ has been extended by a set of environment variables that expose
+ select fields from the host's os-release file to the container
+ payload. Similarly, host's os-release files can be mounted into the
+ container underneath /run/hosts. Together, those mechanisms provide a
+ standardized way to expose information about the host to the
+ container payload. Both interfaces are implemented in systemd-nspawn.
+
+ * All D-Bus services shipped in systemd now implement the generic
+ LogControl1 D-Bus API which allows clients to change log level +
+ target of the service during runtime.
+
+ Contributions from: 24bisquitz, Adam Nielsen, Alan Perry, Alexander
+ Malafeev, Alin Popa, Amos Bird, Andreas Rammhold, AndreRH, Andrew
+ Doran, Anita Zhang, Ankit Jain, antznin, Arnaud Ferraris, Arthur Moraes
+ do Lago, Arusekk, Balaji Punnuru, Balint Reczey, Bastien Nocera,
+ bemarek, Benjamin Berg, Benjamin Dahlhoff, Benjamin Robin, Chris Down,
+ Chris Kerr, Christian Göttsche, Christian Hesse, Christian Oder,
+ Ciprian Hacman, codicodi, Corey Hinshaw, Daan De Meyer, Dana Olson, Dan
+ Callaghan, Daniel Fullmer, Daniel Rusek, Dan Streetman, Dave Reisner,
+ David Edmundson, David Wood, Denis Pronin, Diego Escalante Urrelo,
+ Dimitri John Ledkov, dolphrundgren, duguxy, Einsler Lee, Elisei Roca,
+ Emmanuel Garette, Eric Anderson, Eric DeVolder, Evgeny Vereshchagin,
+ ExtinctFire, fangxiuning, Ferran Pallarès Roca, Filipe Brandenburger,
+ Finn, Florian Klink, Franck Bui, Frantisek Sumsal, Gaoyi, gaurav, Georg
+ Müller, Gergely Polonkai, Giedrius Statkevičius, Gigadoc2, gogogogi,
+ gzjsgdsb, Hans de Goede, Haochen Tong, ianhi, ignapk, Jakov Smolic,
+ James T. Lee, Jan Janssen, Jan Klötzke, Jan Palus, Jay Burger, Jeremy
+ Cline, Jérémy Rosen, Jian-Hong Pan, Jiri Slaby, Joel Shapiro, Joerg
+ Behrmann, Jörg Thalheim, Jouke Witteveen, Kai-Heng Feng, Kenny
+ Levinsen, Kevin Kuehler, Kumar Kartikeya Dwivedi, layderv, laydervus,
+ Lénaïc Huard, Lennart Poettering, Lidong Zhong, Luca Boccassi, Luca
+ BRUNO, Lucas Werkmeister, Lukas Klingsbo, Lukáš Nykrýn, Łukasz
+ Stelmach, Maciej S. Szmigiero, MadMcCrow, Marc-André Lureau, Marcel
+ Holtmann, Marc Kleine-Budde, Martin Hundebøll, Matthew Leeds, Matt
+ Ranostay, Maxim Fomin, MaxVerevkin, Michael Biebl, Michael Chapman,
+ Michael Gubbels, Michael Marley, Michał Bartoszkiewicz, Michal Koutný,
+ Michal Sekletar, Michal Sekletár, Mike Gilbert, Mike Kazantsev, ml,
+ Motiejus Jakštys, nabijaczleweli, nerdopolis, Niccolò Maggioni, Niklas
+ Hambüchen, Norbert Lange, Paul Cercueil, pelzvieh, Peter Hutterer,
+ Piero La Terza, Pieter Lexis, Piotr Drąg, Rafael Fontenelle, Richard
+ Petri, Ronan Pigott, Ross Lagerwall, Rubens Figueiredo, satmandu,
+ Sean-StarLabs, Sebastian Jennen, sterlinghughes, Susant Sahani, Thomas
+ Haller, Tobias Hunger, Tom, Tomáš Pospíšek, Tomer Shechner, Tom Hughes,
+ Topi Miettinen, Tudor Roman, Uwe Kleine-König, Valery0xff, Vito Caputo,
+ Vladimir Panteleev, Vladyslav Tronko, Wen Yang, Yegor Vialov, Yigal
+ Korman, YmrDtnJu, Yuri Chornoivan, Yu Watanabe, Zbigniew
+ Jędrzejewski-Szmek, Zhu Li, Дамјан Георгиевски, наб
+
+ – Warsaw, 2020-07-09
CHANGES WITH 245:
* systemd-sysusers gained support for creating users with the primary
group named differently than the user.
- * systemd-resolved's DNS-over-TLS support gained SNI validation.
-
* systemd-growfs (i.e. the x-systemd.growfs mount option in /etc/fstab)
gained support for growing XFS partitions. Previously it supported
only ext4 and btrfs partitions.
of the PAM session, for example for time-limited logins.
* A new @pkey system call group is now defined to make it easier to
- whitelist memory protection syscalls for containers and services
+ allow-list memory protection syscalls for containers and services
which need to use them.
* systemd-udevd: removed the 30s timeout for killing stale workers on
* udev now provides a program (fido_id) that identifies FIDO CTAP1
("U2F")/CTAP2 security tokens based on the usage declared in their
report and descriptor and outputs suitable environment variables.
- This replaces the externally maintained whitelists of all known
+ This replaces the externally maintained allow lists of all known
security tokens that were used previously.
- * Automatically generated autosuspend udev rules for whitelisted
+ * Automatically generated autosuspend udev rules for allow-listed
devices have been imported from the Chromium OS project. This should
improve power saving with many more devices.
* systemd-networkd's DHCPv4 support now understands a new MaxAttempts=
option for configuring the maximum number of DHCP lease requests. It
- also learnt a new BlackList= option for blacklisting DHCP servers (a
+ also learnt a new BlackList= option for deny-listing DHCP servers (a
similar setting has also been added to the IPv6 RA client), as well
as a SendRelease= option for configuring whether to send a DHCP
RELEASE message when terminating.
any relevant symlinks both in /run and /etc.
* Note that all long-running system services shipped with systemd will
- now default to a system call whitelist (rather than a blacklist, as
+ now default to a system call allow list (rather than a deny list, as
before). In particular, systemd-udevd will now enforce one too. For
most cases this should be safe, however downstream distributions
which disabled sandboxing of systemd-udevd (specifically the
MountFlags= setting), might want to disable this security feature
- too, as the default whitelisting will prohibit all mount, swap,
+ too, as the default allow-listing will prohibit all mount, swap,
reboot and clock changing operations from udev rules.
* sd-boot acquired new loader configuration settings to optionally turn
* systemd-nspawn gained support for a new --system-call-filter= command
line option for adding and removing entries in the default system
call filter it applies. Moreover systemd-nspawn has been changed to
- implement a system call whitelist instead of a blacklist.
+ implement a system call allow list instead of a deny list.
* systemd-run gained support for a new --pipe command line option. If
used the STDIN/STDOUT/STDERR file descriptors passed to systemd-run
fsck's progress report to an AF_UNIX socket in the file
system.
- * udev will no longer create device symlinks for all block
- devices by default. A blacklist for excluding special block
- devices from this logic has been turned into a whitelist
- that requires picking block devices explicitly that require
- device symlinks.
+ * udev will no longer create device symlinks for all block devices by
+ default. A deny list for excluding special block devices from this
+ logic has been turned into a allow list that requires picking block
+ devices explicitly that require device symlinks.
* A new (currently still internal) API sd-device.h has been
added to libsystemd. This modernized API is supposed to
Wikipedia. We explicitly document which base applies for
each configuration option.
- * The DeviceAllow= setting in unit files now supports a syntax
- to whitelist an entire group of devices node majors at once,
- based on the /proc/devices listing. For example, with the
- string "char-pts", it is now possible to whitelist all
- current and future pseudo-TTYs at once.
+ * The DeviceAllow= setting in unit files now supports a syntax to
+ allow-list an entire group of devices node majors at once, based on
+ the /proc/devices listing. For example, with the string "char-pts",
+ it is now possible to allow-list all current and future pseudo-TTYs
+ at once.
* sd-event learned a new "post" event source. Event sources of
this type are triggered by the dispatching of any event
* journalctl gained the new "--header" switch to introspect
header data of journal files.
- * A new setting SystemCallFilters= has been added to services
- which may be used to apply blacklists or whitelists to
- system calls. This is based on SECCOMP Mode 2 of Linux 3.5.
+ * A new setting SystemCallFilters= has been added to services which may
+ be used to apply deny lists or allow lists to system calls. This is
+ based on SECCOMP Mode 2 of Linux 3.5.
* nspawn gained a new --link-journal= switch (and quicker: -j)
to link the container journal with the host. This makes it
projects / thirdparty / systemd.git / blobdiff