systemd System and Service Manager
+CHANGES WITH 238:
+
+ * The MemoryAccounting= unit property now defaults to on. After
+ discussions with the upstream control group maintainers we learnt
+ that the negative impact of cgroup memory accounting on current
+ kernels is finally relatively minimal, so that it should be safe to
+ enable this by default without affecting system performance. Besides
+ memory accounting only task accounting is turned on by default, all
+ other forms of resource accounting (CPU, IO, IP) remain off for now,
+ because it's not clear yet that their impact is small enough to move
+ from opt-in to opt-out. We recommend downstreams to leave memory
+ accounting on by default if kernel 4.14 or higher is primarily
+ used. On very resource constrained systems or when support for old
+ kernels is a necessity, -Dmemory-accounting-default=false can be used
+ to revert this change.
+
+ * rpm scriptlets to update the udev hwdb and rules (%udev_hwdb_update,
+ %udev_rules_update) and the journal catalog (%journal_catalog_update)
+ from the upgrade scriptlets of individual packages now do nothing.
+ Transfiletriggers have been added which will perform those updates
+ once at the end of the transaction.
+
+ Similar transfiletriggers have been added to execute any sysctl.d
+ and binfmt.d rules. Thus, it should be unnecessary to provide any
+ scriptlets to execute this configuration from package installation
+ scripts.
+
+ * systemd-sysusers gained a mode where the configuration to execute is
+ specified on the command line, but this configuration is not executed
+ directly, but instead it is merged with the configuration on disk,
+ and the result is executed. This is useful for package installation
+ scripts which want to create the user before installing any files on
+ disk (in case some of those files are owned by that user), while
+ still allowing local admin overrides.
+
+ This functionality is exposed to rpm scriptlets through a new
+ %sysusers_create_package macro. Old %sysusers_create and
+ %sysusers_create_inline macros are deprecated.
+
+ A transfiletrigger for sysusers.d configuration is now installed,
+ which means that it should be unnecessary to call systemd-sysusers from
+ package installation scripts, unless the package installs any files
+ owned by those newly-created users, in which case
+ %sysusers_create_package should be used.
+
+ * Analogous change has been done for systemd-tmpfiles: it gained a mode
+ where the command-line configuration is merged with the configuration
+ on disk. This is exposed as the new %tmpfiles_create_package macro,
+ and %tmpfiles_create is deprecated. A transfiletrigger is installed
+ for tmpfiles.d, hence it should be unnecessary to call systemd-tmpfiles
+ from package installation scripts.
+
+ * sysusers.d configuration for a user may now also specify the group
+ number, in addition to the user number ("u username 123:456"), or
+ without the user number ("u username -:456").
+
+ * Configution items for systemd-sysusers can now be specified as
+ positional arguments when the new --inline switch is used.
+
+ * The login shell of users created through sysusers.d may now be
+ specified (previously, it was always /bin/sh for root and
+ /sbin/nologin for other users).
+
+ * systemd-analyze gained a new --global switch to look at global user
+ configuration. It also gained a unit-paths verb to list the unit load
+ paths that are compiled into systemd (which can be used with
+ --systemd, --user, or --global).
+
+ * udevadm trigger gained a new --settle/-w option to wait for any
+ triggered events to finish (but just those, and not any other events
+ which are triggered meanwhile).
+
+ * The action that systemd-logind takes when the lid is closed and the
+ machine is connected to external power can now be configured using
+ HandleLidSwitchExternalPower= in logind.conf. Previously, this action
+ was determined by HandleLidSwitch=, and, for backwards compatibility,
+ is still is, if HandleLidSwitchExternalPower= is not explicitly set.
+
+ * journalctl will periodically call sd_journal_process() to make it
+ resilient against inotify queue overruns when journal files are
+ rotated very quickly.
+
+ * Two new functions in libsystemd — sd_bus_get_n_queued_read and
+ sd_bus_get_n_queued_write — may be used to check the number of
+ pending bus messages.
+
+ * systemd gained a new
+ org.freedesktop.systemd1.Manager.AttachProcessesToUnit dbus call
+ which can be used to migrate foreign processes to scope and service
+ units. The primary user for this new API is systemd itself: the
+ systemd --user instance uses this call of the systemd --system
+ instance to migrate processes if it itself gets the request to
+ migrate processes and the kernel refuses this due to access
+ restrictions. Thanks to this "systemd-run --scope --user …" works
+ again in pure cgroups v2 environments when invoked from the user
+ session scope.
+
+ * A new TemporaryFileSystem= setting can be used to mask out part of
+ the real file system tree with tmpfs mounts. This may be combined
+ with BindPaths= and BindReadOnlyPaths= to hide files or directories
+ not relevant to the unit, while still allowing some paths lower in
+ the tree to be accessed.
+
+ ProtectHome=tmpfs may now be used to hide user home and runtime
+ directories from units, in a way that is mostly equivalent to
+ "TemporaryFileSystem=/home /run/user /root".
+
+ * Non-service units are now started with KeyringMode=shared by default.
+ This means that mount and swapon and other mount tools have access
+ to keys in the main keyring.
+
+ * /sys/fs/bpf is now mounted automatically.
+
+ * QNX virtualization is now detected by systemd-detect-virt and may
+ be used in ConditionVirtualization=.
+
+ * IPAccounting= may now be enabled also for slice units.
+
+ * A new -Dsplit-bin= build configuration switch may be used to specify
+ whether bin and sbin directories are merged, or if they should be
+ included separately in $PATH and various listings of executable
+ directories. The build configuration scripts will try to autodetect
+ the proper values of -Dsplit-usr= and -Dsplit-bin= based on build
+ system, but distributions are encouraged to configure this
+ explicitly.
+
+ * A new -Dok-color= build configuration switch may be used to change
+ the colour of "OK" status messages.
+
+ * UPGRADE ISSUE: serialization of units using JoinsNamespaceOf= with
+ PrivateNetwork=yes was buggy in previous versions of systemd. This
+ means that after the upgrade and daemon-reexec, any such units must
+ be restarted.
+
+ * INCOMPATIBILITY: as announced in the NEWS for 237, systemd-tmpfiles
+ will not exclude read-only files owned by root from cleanup.
+
+ Contributions from: Alan Jenkins, Alexander F Rødseth, Alexis Jeandet,
+ Andika Triwidada, Andrei Gherzan, Ansgar Burchardt, antizealot1337,
+ Batuhan Osman Taşkaya, Beniamino Galvani, Bill Yodlowsky, Caio Marcelo
+ de Oliveira Filho, CuBiC, Daniele Medri, Daniel Mouritzen, Daniel
+ Rusek, Davide Cavalca, Dimitri John Ledkov, Douglas Christman, Evgeny
+ Vereshchagin, Faalagorn, Filipe Brandenburger, Franck Bui, futpib,
+ Giacomo Longo, Gunnar Hjalmarsson, Hans de Goede, Hermann Gausterer,
+ Iago López Galeiras, Jakub Filak, Jan Synacek, Jason A. Donenfeld,
+ Javier Martinez Canillas, Jérémy Rosen, Lennart Poettering, Lucas
+ Werkmeister, Mao Huang, Marco Gulino, Michael Biebl, Michael Vogt,
+ MilhouseVH, Neal Gompa (ニール・ゴンパ), Oleander Reis, Olof Mogren,
+ Patrick Uiterwijk, Peter Hutterer, Peter Portante, Piotr Drąg, Robert
+ Antoni Buj Gelonch, Sergey Ptashnick, Shawn Landden, Shuang Liu, Simon
+ Fowler, SjonHortensius, snorreflorre, Susant Sahani, Sylvain
+ Plantefève, Thomas Blume, Thomas Haller, Vito Caputo, Yu Watanabe,
+ Zbigniew Jędrzejewski-Szmek, Марко М. Костић (Marko M. Kostić)
+
+ — Warsaw, 2018-03-05
+
CHANGES WITH 237:
* Some keyboards come with a zoom see-saw or rocker which until now got
store again, ahead of POLLHUP or POLLERR when they are removed
anyway.
- * A new document UIDS-GIDS.md has been added to the source tree, that
- documents the UID/GID range and assignment assumptions and
+ * A new document doc/UIDS-GIDS.md has been added to the source tree,
+ that documents the UID/GID range and assignment assumptions and
requirements of systemd.
* The watchdog device PID 1 will ping may now be configured through the
* Documentation has been added that lists all of systemd's low-level
environment variables:
- https://github.com/systemd/systemd/blob/master/ENVIRONMENT.md
+ https://github.com/systemd/systemd/blob/master/doc/ENVIRONMENT.md
* sd-daemon gained a new API sd_is_socket_sockaddr() for determining
whether a specific socket file descriptor matches a specified socket
booted up with "systemd-nspawn -b -i", qemu-kvm or on any physical
UEFI PC. This functionality is particularly useful to easily test
local changes made to systemd in a pristine, defined environment. See
- HACKING for details.
+ doc/HACKING for details.
* configure learned the --with-support-url= option to specify the
distribution's bugtracker.
projects / thirdparty / systemd.git / blobdiff