systemd System and Service Manager
-CHANGES WITH 240 in spe:
+CHANGES WITH 243 in spe:
+
+ * Previously, filters defined with SystemCallFilter= would have the
+ effect that an calling an offending system call would terminate the
+ calling thread. This behaviour never made much sense, since killing
+ individual threads of unexpecting processes is likely to create more
+ problems than it solves. With this release the default action changed
+ from killing the thread to killing the whole process. For this to
+ work correctly both a kernel version (>= 4.14) and a libseccomp
+ version (>= 2.4.0) supporting this new seccomp action is required. If
+ an older kernel or libseccomp is used the old behaviour continues to
+ be used. This change does not affect any services that have no system
+ call filters defined, or that use SystemCallErrorNumber= (and thus
+ see EPERM or another error instead of being killed when calling an
+ offending system call). Note that systemd documentation always
+ claimed that the whole process is killed. With this change behaviour
+ is thus adjusted to match the documentation.
+
+ * The "kernel.pid_max" sysctl is now bumped to 4194304 by default,
+ i.e. the full 22bit range the kernel allows, up from the old 16bit
+ range. This should improve security and robustness a bit, as PID
+ collisions are made less likely (though certainly still
+ possible). There are rumours this might create compatibility
+ problems, though at this moment no practical ones are known to
+ us. Downstream distributions are hence advised to undo this change in
+ their builds if they are concerned about maximum compatibility, but
+ for everybody else we recommend leaving the value bumped. Besides
+ improving security and robustness this should also simplify things as
+ the maximum number of allowed concurrent tasks was previously bounded
+ by both "kernel.pid_max" and "kernel.threads-max" and now only a
+ single knob is left ("kernel.threads-max"). There have been concerns
+ that usability is affected by this change because larger PID numbers
+ are harder to type, but we believe the change from 5 digit PIDs to 7
+ digit PIDs is not too hampering for usability.
+
+ * MemoryLow and MemoryMin gained hierarchy-aware counterparts,
+ DefaultMemoryLow and DefaultMemoryMin, which can be used to
+ hierarchically set default memory protection values for a particular
+ subtree of the unit hierarchy.
+
+ * Memory protection directives can now take a value of zero, allowing
+ explicit opting out of a default value propagated by an ancestor.
+
+ * systemd now defaults to the "unified" cgroup hierarchy setup during
+ build-time, i.e. -Ddefault-hierarchy=unified is now the build-time
+ default. Previously, -Ddefault-hierarchy=hybrid was the default. This
+ change reflects the fact that cgroupsv2 support has matured
+ substantially in both systemd and in the kernel, and is clearly the
+ way forward. Downstream production distributions might want to
+ continue to use -Ddefault-hierarchy=hybrid (or even =legacy) for
+ their builds as unfortunately the popular container managers have not
+ caught up with the kernel API changes.
+
+ * Man pages are not built by default anymore (html pages were already
+ disabled by default), to make development builds quicker. When
+ building systemd for a full installation with documentation, meson
+ should be called -Dman=true and/or -Dhtml=true as appropriate. The
+ default was changed based on the assumption that quick one-off or
+ repeated development builds are much more common than full optimized
+ builds for installation, and people need to pass various other
+ options to when doing "proper" builds anyway, so the gain from making
+ development builds quicker is bigger than the one time disruption for
+ packagers.
+
+ Two scripts are created in the *build* directory to generate and
+ preview man and html pages on demand, e.g.:
+
+ build/man/man systemctl
+ build/man/html systemd.index
+
+ * The D-Bus "wire format" for CPUAffinity attribute is changed on
+ big-endian machines. Before, bytes were written and read in native
+ machine order as exposed by the native libc __cpu_mask interface.
+ Now, little-endian order is always used (CPUs 0–7 are described by
+ bits 0–7 in byte 0, CPUs 8–15 are described by byte 1, and so on).
+ This change fixes D-Bus calls that cross endianness boundary.
+
+ The presentation format used for CPUAffinity by systemctl show and
+ systemd-analyze dump is changed to present CPU indices instead of the
+ raw __cpu_mask bitmask. For example, CPUAffinity=0-1 would be shown
+ as CPUAffinity=03000000000000000000000000000… (on little-endian) or
+ CPUAffinity=00000000000000300000000000000… (on 64-bit big-endian),
+ and is now shown as CPUAffinity=0-1, matching the input format. The
+ maximum integer that will be printed in new format is 8191 (four
+ digits), while the old format always used a very long number (with
+ the length varying by architecture), so they can be unambiguously
+ distinguished.
+
+ * /usr/sbin/halt.local is no longer supported. Implementation in
+ distributions was inconsistent and it seems this functionality was
+ very rarely used.
+
+ To replace this functionality, users should:
+ - either define a new unit and make it a dependency of final.target
+ (systemctl add-wants final.target my-halt-local.service)
+ - or move the shutdown script to /usr/lib/systemd/system-shutdown/
+ and ensure that it accepts "halt", "poweroff", "reboot", and
+ "kexec" as an argument, see the description in systemd-shutdown(8).
+
+ * When a [Match] section in .link or .network file is empty (contains
+ no match patterns), a warning will be emitted. Please add any "match
+ all" pattern instead, e.g. OriginalName=* or Name=* in case all
+ interfaces should really be matched.
+
+ …
+
+CHANGES WITH 242:
+
+ * In .link files, MACAddressPolicy=persistent (the default) is changed
+ to cover more devices. For devices like bridges, tun, tap, bond, and
+ similar interfaces that do not have other identifying information,
+ the interface name is used as the basis for persistent seed for MAC
+ and IPv4LL addresses. The way that devices that were handled
+ previously is not changed, and this change is about covering more
+ devices then previously by the "persistent" policy.
+
+ MACAddressPolicy=random may be used to force randomized MACs and
+ IPv4LL addresses for a device if desired.
+
+ Hint: the log output from udev (at debug level) was enhanced to
+ clarify what policy is followed and which attributes are used.
+ `SYSTEMD_LOG_LEVEL=debug udevadm test-builtin net_setup_link /sys/class/net/<name>`
+ may be used to view this.
+
+ * The .device units generated by systemd-fstab-generator and other
+ generators do not automatically pull in the corresponding .mount unit
+ as a Wants= dependency. This means that simply plugging in the device
+ will not cause the mount unit to be started automatically. But please
+ note that the mount unit may be started for other reasons, in
+ particular if it is part of local-fs.target, and any unit which
+ (transitively) depends on local-fs.target is started.
+
+ * networkctl list/status/lldp now accept globbing wildcards for network
+ interface names to match against all existing interfaces.
+
+ * The $PIDFILE environment variable is set to point the absolute path
+ configured with PIDFile= for processes of that service.
+
+ * The fallback DNS server list was augmented with Cloudflare public DNS
+ servers. Use `-Ddns-servers=` to set a different fallback.
+
+ * A new special target usb-gadget.target will be started automatically
+ when a USB Device Controller is detected (which means that the system
+ is a USB peripheral).
+
+ * A new unit setting CPUQuotaPeriodSec= assigns the time period
+ relatively to which the CPU time quota specified by CPUQuota= is
+ measured.
+
+ * A new unit setting ProtectHostname= may be used to prevent services
+ from modifying hostname information (even if they otherwise would
+ have privileges to do so).
+
+ * A new unit setting NetworkNamespacePath= may be used to specify a
+ namespace for service or socket units through a path referring to a
+ Linux network namespace pseudo-file.
+
+ * The PrivateNetwork= setting and JoinsNamespaceOf= dependencies now
+ have an effect on .socket units: when used the listening socket is
+ created within the configured network namespace instead of the host
+ namespace.
+
+ * ExecStart= command lines in unit files may now be prefixed with ':'
+ in which case environment variable substitution is
+ disabled. (Supported for the other ExecXYZ= settings, too.)
+
+ * .timer units gained two new boolean settings OnClockChange= and
+ OnTimezoneChange= which may be used to also trigger a unit when the
+ system clock is changed or the local timezone is
+ modified. systemd-run has been updated to make these options easily
+ accessible from the command line for transient timers.
+
+ * Two new conditions for units have been added: ConditionMemory= may be
+ used to conditionalize a unit based on installed system
+ RAM. ConditionCPUs= may be used to conditionalize a unit based on
+ installed CPU cores.
+
+ * The @default system call filter group understood by SystemCallFilter=
+ has been updated to include the new rseq() system call introduced in
+ kernel 4.15.
+
+ * A new time-set.target has been added that indicates that the system
+ time has been set from a local source (possibly imprecise). The
+ existing time-sync.target is stronger and indicates that the time has
+ been synchronized with a precise external source. Services where
+ approximate time is sufficient should use the new target.
+
+ * "systemctl start" (and related commands) learnt a new
+ --show-transaction option. If specified brief information about all
+ jobs queued because of the requested operation is shown.
+
+ * systemd-networkd recognizes a new operation state 'enslaved', used
+ (instead of 'degraded' or 'carrier') for interfaces which form a
+ bridge, bond, or similar, and an new 'degraded-carrier' operational
+ state used for the bond or bridge master interface when one of the
+ enslaved devices is not operational.
+
+ * .network files learnt the new IgnoreCarrierLoss= option for leaving
+ networks configured even if the carrier is lost.
+
+ * The RequiredForOnline= setting in .network files may now specify a
+ minimum operational state required for the interface to be considered
+ "online" by systemd-networkd-wait-online. Related to this
+ systemd-networkd-wait-online gained a new option --operational-state=
+ to configure the same, and its --interface= option was updated to
+ optionally also take an operational state specific for an interface.
+
+ * systemd-networkd-wait-online gained a new setting --any for waiting
+ for only one of the requested interfaces instead of all of them.
+
+ * systemd-networkd now implements L2TP tunnels.
+
+ * Two new .network settings UseAutonomousPrefix= and UseOnLinkPrefix=
+ may be used to cause autonomous and onlink prefixes received in IPv6
+ Router Advertisements to be ignored.
+
+ * New MulticastFlood=, NeighborSuppression=, and Learning= .network
+ file settings may be used to tweak bridge behaviour.
+
+ * The new TripleSampling= option in .network files may be used to
+ configure CAN triple sampling.
+
+ * A new .netdev settings PrivateKeyFile= and PresharedKeyFile= may be
+ used to point to private or preshared key for a WireGuard interface.
+
+ * /etc/crypttab now supports the same-cpu-crypt and
+ submit-from-crypt-cpus options to tweak encryption work scheduling
+ details.
+
+ * systemd-tmpfiles will now take a BSD file lock before operating on a
+ contents of directory. This may be used to temporarily exclude
+ directories from aging by taking the same lock (useful for example
+ when extracting a tarball into /tmp or /var/tmp as a privileged user,
+ which might create files with really old timestamps, which
+ nevertheless should not be deleted). For further details, see:
+
+ https://systemd.io/TEMPORARY_DIRECTORIES
+
+ * systemd-tmpfiles' h line type gained support for the
+ FS_PROJINHERIT_FL ('P') file attribute (introduced in kernel 4.5),
+ controlling project quota inheritance.
+
+ * sd-boot and bootctl now implement support for an Extended Boot Loader
+ (XBOOTLDR) partition, that is intended to be mounted to /boot, in
+ addition to the ESP partition mounted to /efi or /boot/efi.
+ Configuration file fragments, kernels, initrds and other EFI images
+ to boot will be loaded from both the ESP and XBOOTLDR partitions.
+ The XBOOTLDR partition was previously described by the Boot Loader
+ Specification, but implementation was missing in sd-boot. Support for
+ this concept allows using the sd-boot boot loader in more
+ conservative scenarios where the boot loader itself is placed in the
+ ESP but the kernels to boot (and their metadata) in a separate
+ partition.
+
+ * A system may now be booted with systemd.volatile=overlay on the
+ kernel command line, which causes the root file system to be set up
+ an overlayfs mount combining the root-only root directory with a
+ writable tmpfs. In this setup, the underlying root device is not
+ modified, and any changes are lost at reboot.
+
+ * Similar, systemd-nspawn can now boot containers with a volatile
+ overlayfs root with the new --volatile=overlay switch.
+
+ * systemd-nspawn can now consume OCI runtime bundles using a new
+ --oci-bundle= option. This implementation is fully usable, with most
+ features in the specification implemented, but since this a lot of
+ new code and functionality, this feature should most likely not
+ be used in production yet.
+
+ * systemd-nspawn now supports various options described by the OCI
+ runtime specification on the command-line and in .nspawn files:
+ --inaccessible=/Inaccessible= may be used to mask parts of the file
+ system tree, --console=/--pipe may be used to configure how standard
+ input, output, and error are set up.
+
+ * busctl learned the `emit` verb to generate D-Bus signals.
+
+ * systemd-analyze cat-config may be used to gather and display
+ configuration spread over multiple files, for example system and user
+ presets, tmpfiles.d, sysusers.d, udev rules, etc.
+
+ * systemd-analyze calendar now takes an optional new parameter
+ --iterations= which may be used to show a maximum number of iterations
+ the specified expression will elapse next.
+
+ * The sd-bus C API gained support for naming method parameters in the
+ introspection data.
+
+ * systemd-logind gained D-Bus APIs to specify the "reboot parameter"
+ the reboot() system call expects.
+
+ * journalctl learnt a new --cursor-file= option that points to a file
+ from which a cursor should be loaded in the beginning and to which
+ the updated cursor should be stored at the end.
+
+ * ACRN hypervisor and Windows Subsystem for Linux (WSL) are now
+ detected by systemd-detect-virt (and may also be used in
+ ConditionVirtualization=).
+
+ * The behaviour of systemd-logind may now be modified with environment
+ variables $SYSTEMD_REBOOT_TO_FIRMWARE_SETUP,
+ $SYSTEMD_REBOOT_TO_BOOT_LOADER_MENU, and
+ $SYSTEMD_REBOOT_TO_BOOT_LOADER_ENTRY. They cause logind to either
+ skip the relevant operation completely (when set to false), or to
+ create a flag file in /run/systemd (when set to true), instead of
+ actually commencing the real operation when requested. The presence
+ of /run/systemd/reboot-to-firmware-setup,
+ /run/systemd/reboot-to-boot-loader-menu, and
+ /run/systemd/reboot-to-boot-loader-entry, may be used by alternative
+ boot loader implementations to replace some steps logind performs
+ during reboot with their own operations.
+
+ * systemctl can be used to request a reboot into the boot loader menu
+ or a specific boot loader entry with the new --boot-load-menu= and
+ --boot-loader-entry= options to a reboot command. (This requires a
+ boot loader that supports this, for example sd-boot.)
+
+ * kernel-install will no longer unconditionally create the output
+ directory (e.g. /efi/<machine-id>/<kernel-version>) for boot loader
+ snippets, but will do only if the machine-specific parent directory
+ (i.e. /efi/<machine-id>/) already exists. bootctl has been modified
+ to create this parent directory during sd-boot installation.
+
+ This makes it easier to use kernel-install with plugins which support
+ a different layout of the bootloader partitions (for example grub2).
+
+ * During package installation (with `ninja install`), we would create
+ symlinks for getty@tty1.service, systemd-networkd.service,
+ systemd-networkd.socket, systemd-resolved.service,
+ remote-cryptsetup.target, remote-fs.target,
+ systemd-networkd-wait-online.service, and systemd-timesyncd.service
+ in /etc, as if `systemctl enable` was called for those units, to make
+ the system usable immediately after installation. Now this is not
+ done anymore, and instead calling `systemctl preset-all` is
+ recommended after the first installation of systemd.
+
+ * A new boolean sandboxing option RestrictSUIDSGID= has been added that
+ is built on seccomp. When turned on creation of SUID/SGID files is
+ prohibited.
+
+ * The NoNewPrivileges= and the new RestrictSUIDSGID= options are now
+ implied if DynamicUser= is turned on for a service. This hardens
+ these services, so that they neither can benefit from nor create
+ SUID/SGID executables. This is a minor compatibility breakage, given
+ that when DynamicUser= was first introduced SUID/SGID behaviour was
+ unaffected. However, the security benefit of these two options is
+ substantial, and the setting is still relatively new, hence we opted
+ to make it mandatory for services with dynamic users.
+
+ Contributions from: Adam Jackson, Alexander Tsoy, Andrey Yashkin,
+ Andrzej Pietrasiewicz, Anita Zhang, Balint Reczey, Beniamino Galvani,
+ Ben Iofel, Benjamin Berg, Benjamin Dahlhoff, Chris, Chris Morin,
+ Christopher Wong, Claudius Ellsel, Clemens Gruber, dana, Daniel Black,
+ Davide Cavalca, David Michael, David Rheinsberg, emersion, Evgeny
+ Vereshchagin, Filipe Brandenburger, Franck Bui, Frantisek Sumsal,
+ Giacinto Cifelli, Hans de Goede, Hugo Kindel, Ignat Korchagin, Insun
+ Pyo, Jan Engelhardt, Jonas Dorel, Jonathan Lebon, Jonathon Kowalski,
+ Jörg Sommer, Jörg Thalheim, Jussi Pakkanen, Kai-Heng Feng, Lennart
+ Poettering, Lubomir Rintel, Luís Ferreira, Martin Pitt, Matthias
+ Klumpp, Michael Biebl, Michael Niewöhner, Michael Olbrich, Michal
+ Sekletar, Mike Lothian, Paul Menzel, Piotr Drąg, Riccardo Schirone,
+ Robin Elvedi, Roman Kulikov, Ronald Tschalär, Ross Burton, Ryan
+ Gonzalez, Sebastian Krzyszkowiak, Stephane Chazelas, StKob, Susant
+ Sahani, Sylvain Plantefève, Szabolcs Fruhwald, Taro Yamada, Theo
+ Ouzhinski, Thomas Haller, Tobias Jungel, Tom Yan, Tony Asleson, Topi
+ Miettinen, unixsysadmin, Van Laser, Vesa Jääskeläinen, Yu, Li-Yu,
+ Yu Watanabe, Zbigniew Jędrzejewski-Szmek
+
+ — Warsaw, 2019-04-11
+
+CHANGES WITH 241:
+
+ * The default locale can now be configured at compile time. Otherwise,
+ a suitable default will be selected automatically (one of C.UTF-8,
+ en_US.UTF-8, and C).
+
+ * The version string shown by systemd and other tools now includes the
+ git commit hash when built from git. An override may be specified
+ during compilation, which is intended to be used by distributions to
+ include the package release information.
+
+ * systemd-cat can now filter standard input and standard error streams
+ for different syslog priorities using the new --stderr-priority=
+ option.
+
+ * systemd-journald and systemd-journal-remote reject entries which
+ contain too many fields (CVE-2018-16865) and set limits on the
+ process' command line length (CVE-2018-16864).
+
+ * $DBUS_SESSION_BUS_ADDRESS environment variable is set by pam_systemd
+ again.
+
+ * A new network device NamePolicy "keep" is implemented for link files,
+ and used by default in 99-default.link (the fallback configuration
+ provided by systemd). With this policy, if the network device name
+ was already set by userspace, the device will not be renamed again.
+ This matches the naming scheme that was implemented before
+ systemd-240. If naming-scheme < 240 is specified, the "keep" policy
+ is also enabled by default, even if not specified. Effectively, this
+ means that if naming-scheme >= 240 is specified, network devices will
+ be renamed according to the configuration, even if they have been
+ renamed already, if "keep" is not specified as the naming policy in
+ the .link file. The 99-default.link file provided by systemd includes
+ "keep" for backwards compatibility, but it is recommended for user
+ installed .link files to *not* include it.
+
+ The "kernel" policy, which keeps kernel names declared to be
+ "persistent", now works again as documented.
+
+ * kernel-install script now optionally takes the paths to one or more
+ initrd files, and passes them to all plugins.
+
+ * The mincore() system call has been dropped from the @system-service
+ system call filter group, as it is pretty exotic and may potentially
+ used for side-channel attacks.
+
+ * -fPIE is dropped from compiler and linker options. Please specify
+ -Db_pie=true option to meson to build position-independent
+ executables. Note that the meson option is supported since meson-0.49.
+
+ * The fs.protected_regular and fs.protected_fifos sysctls, which were
+ added in Linux 4.19 to make some data spoofing attacks harder, are
+ now enabled by default. While this will hopefully improve the
+ security of most installations, it is technically a backwards
+ incompatible change; to disable these sysctls again, place the
+ following lines in /etc/sysctl.d/60-protected.conf or a similar file:
+
+ fs.protected_regular = 0
+ fs.protected_fifos = 0
+
+ Note that the similar hardlink and symlink protection has been
+ enabled since v199, and may be disabled likewise.
+
+ * The files read from the EnvironmentFile= setting in unit files now
+ parse backslashes inside quotes literally, matching the behaviour of
+ POSIX shells.
+
+ * udevadm trigger, udevadm control, udevadm settle and udevadm monitor
+ now automatically become NOPs when run in a chroot() environment.
+
+ * The tmpfiles.d/ "C" line type will now copy directory trees not only
+ when the destination is so far missing, but also if it already exists
+ as a directory and is empty. This is useful to cater for systems
+ where directory trees are put together from multiple separate mount
+ points but otherwise empty.
+
+ * A new function sd_bus_close_unref() (and the associated
+ sd_bus_close_unrefp()) has been added to libsystemd, that combines
+ sd_bus_close() and sd_bus_unref() in one.
+
+ * udevadm control learnt a new option for --ping for testing whether a
+ systemd-udevd instance is running and reacting.
+
+ * udevadm trigger learnt a new option for --wait-daemon for waiting
+ systemd-udevd daemon to be initialized.
+
+ Contributions from: Aaron Plattner, Alberts Muktupāvels, Alex Mayer,
+ Ayman Bagabas, Beniamino Galvani, Burt P, Chris Down, Chris Lamb, Chris
+ Morin, Christian Hesse, Claudius Ellsel, dana, Daniel Axtens, Daniele
+ Medri, Dave Reisner, David Santamaría Rogado, Diego Canuhe, Dimitri
+ John Ledkov, Evgeny Vereshchagin, Fabrice Fontaine, Filipe
+ Brandenburger, Franck Bui, Frantisek Sumsal, govwin, Hans de Goede,
+ James Hilliard, Jan Engelhardt, Jani Uusitalo, Jan Janssen, Jan
+ Synacek, Jonathan McDowell, Jonathan Roemer, Jonathon Kowalski, Joost
+ Heitbrink, Jörg Thalheim, Lance, Lennart Poettering, Louis Taylor,
+ Lucas Werkmeister, Mantas Mikulėnas, Marc-Antoine Perennou,
+ marvelousblack, Michael Biebl, Michael Sloan, Michal Sekletar, Mike
+ Auty, Mike Gilbert, Mikhail Kasimov, Neil Brown, Niklas Hambüchen,
+ Patrick Williams, Paul Seyfert, Peter Hutterer, Philip Withnall, Roger
+ James, Ronnie P. Thomas, Ryan Gonzalez, Sam Morris, Stephan Edel,
+ Stephan Gerhold, Susant Sahani, Taro Yamada, Thomas Haller, Topi
+ Miettinen, YiFei Zhu, YmrDtnJu, YunQiang Su, Yu Watanabe, Zbigniew
+ Jędrzejewski-Szmek, zsergeant77, Дамјан Георгиевски
+
+ — Berlin, 2019-02-14
+
+CHANGES WITH 240:
* NoNewPrivileges=yes has been set for all long-running services
implemented by systemd. Previously, this was problematic due to
an SELinux policy update is required.
(See e.g. https://github.com/fedora-selinux/selinux-policy/pull/234.)
+ * DynamicUser=yes is dropped from systemd-networkd.service,
+ systemd-resolved.service and systemd-timesyncd.service, which was
+ enabled in v239 for systemd-networkd.service and systemd-resolved.service,
+ and since v236 for systemd-timesyncd.service. The users and groups
+ systemd-network, systemd-resolve and systemd-timesync are created
+ by systemd-sysusers again. Distributors or system administrators
+ may need to create these users and groups if they not exist (or need
+ to re-enable DynamicUser= for those units) while upgrading systemd.
+ Also, the clock file for systemd-timesyncd may need to move from
+ /var/lib/private/systemd/timesync/clock to /var/lib/systemd/timesync/clock.
+
* When unit files are loaded from disk, previously systemd would
sometimes (depending on the unit loading order) load units from the
target path of symlinks in .wants/ or .requires/ directories of other
file descriptors currently enforced (fs.file-max, fs.nr_open,
RLIMIT_NOFILE hard, RLIMIT_NOFILE soft) we turn off the first two,
and keep only the latter two. A set of build-time options
- (-Dbump-proc-sys-fs-file-max=no and -Dbump-proc-sys-fs-nr-open=no)
+ (-Dbump-proc-sys-fs-file-max=false and -Dbump-proc-sys-fs-nr-open=false)
has been added to revert this change in behaviour, which might be
an option for systems that turn off memcg in the kernel.
* Support for disabling a particular cgroup controller within a sub-tree
has been added through the DisableControllers= directive.
+ * cgroup_no_v1=all on the kernel command line now also implies
+ using the unified cgroup hierarchy, unless one explicitly passes
+ systemd.unified_cgroup_hierarchy=0 on the kernel command line.
+
* The new "MemoryMin=" unit file property may now be used to set the
memory usage protection limit of processes invoked by the unit. This
- controls the cgroupsv2 memory.min attribute. Similarly, the new
+ controls the cgroup v2 memory.min attribute. Similarly, the new
"IODeviceLatencyTargetSec=" property has been added, wrapping the new
- cgroupsv2 io.latency cgroup property for configuring per-service I/O
+ cgroup v2 io.latency cgroup property for configuring per-service I/O
latency.
- * systemd now supports the cgroupsv2 devices BPF logic, as counterpart
- to the cgroupsv1 "devices" cgroup controller.
+ * systemd now supports the cgroup v2 devices BPF logic, as counterpart
+ to the cgroup v1 "devices" cgroup controller.
* systemd-escape now is able to combine --unescape with --template. It
also learnt a new option --instance for extracting and unescaping the
* Most configuration options that previously accepted percentage values
now also accept permille values with the '‰' suffix (instead of '%').
- * systemd-logind will offer hibernation only if the currently used
- kernel image is still available on disk.
-
* systemd-resolved may now optionally use OpenSSL instead of GnuTLS for
DNS-over-TLS.
* The JoinControllers= option in system.conf is no longer supported, as
it didn't work correctly, is hard to support properly, is legacy (as
- the concept only exists on cgroupsv1) and apparently wasn't used.
+ the concept only exists on cgroup v1) and apparently wasn't used.
* Journal messages that are generated whenever a unit enters the failed
state are now tagged with a unique MESSAGE_ID. Similarly, messages
generated whenever a service process exits are now made recognizable,
- too. A taged message is also emitted whenever a unit enters the
+ too. A tagged message is also emitted whenever a unit enters the
"dead" state on success.
* systemd-run gained a new switch --working-directory= for configuring
notified about this userspace breakage quickly, but they chose to
ignore it.
+ * PermissionsStartOnly= setting is deprecated (but is still supported
+ for backwards compatibility). The same functionality is provided by
+ the more flexible "+", "!", and "!!" prefixes to ExecStart= and other
+ commands.
+
+ * $DBUS_SESSION_BUS_ADDRESS environment variable is not set by
+ pam_systemd anymore.
+
+ * The naming scheme for network devices was changed to always rename
+ devices, even if they were already renamed by userspace. The "kernel"
+ policy was changed to only apply as a fallback, if no other naming
+ policy took effect.
+
+ * The requirements to build systemd is bumped to meson-0.46 and
+ python-3.5.
+
Contributions from: afg, Alan Jenkins, Aleksei Timofeyev, Alexander
Filippov, Alexander Kurtz, Alexey Bogdanenko, Andreas Henriksson,
Andrew Jorgensen, Anita Zhang, apnix-uk, Arkan49, Arseny Maslennikov,
Ellsel, Colin Guthrie, dana, Daniel, Daniele Medri, Daniel Kahn
Gillmor, Daniel Rusek, Daniel van Vugt, Dariusz Gadomski, Dave Reisner,
David Anderson, Davide Cavalca, David Leeds, David Malcolm, David
- Strauss, David Tardon, Dimitri John Ledkov, dj-kaktus, Dongsu Park,
- Elias Probst, Emil Soleyman, Erik Kooistra, Ervin Peters, Evgeni Golov,
- Evgeny Vereshchagin, Fabrice Fontaine, Faheel Ahmad, Faizal Luthfi,
- Felix Yan, Filipe Brandenburger, Franck Bui, Frank Schaefer, Frantisek
- Sumsal, Gautier Husson, Gianluca Boiano, Giuseppe Scrivano, glitsj16,
- Hans de Goede, Harald Hoyer, Harry Mallon, Harshit Jain, Helmut Grohne,
- Henry Tung, Hui Yiqun, imayoda, Insun Pyo, Iwan Timmer, Jan Janssen,
- Jan Pokorný, Jan Synacek, Jason A. Donenfeld, javitoom, Jérémy Nouhaud,
- Jiuyang Liu, João Paulo Rechi Vita, Joe Hershberger, Joe Rayhawk, Joerg
- Behrmann, Joerg Steffens, Jonas Dorel, Jon Ringle, Josh Soref, Julian
- Andres Klode, Jun Bo Bi, Jürg Billeter, Keith Busch, Khem Raj, Kirill
- Marinushkin, Larry Bernstone, Lennart Poettering, Lion Yang, Li Song,
- Lorenz Hübschle-Schneider, Lubomir Rintel, Lucas Werkmeister, Ludwin
- Janvier, Lukáš Nykrýn, Luke Shumaker, mal, Marc-Antoine Perennou,
- Marcin Skarbek, Marco Trevisan (Treviño), Marian Cepok, Mario Hros,
- Marko Myllynen, Markus Grimm, Martin Pitt, Martin Sobotka, Martin
- Wilck, Mathieu Trudel-Lapierre, Matthew Leeds, Michael Biebl, Michael
- Olbrich, Michael 'pbone' Pobega, Michael Scherer, Michal Koutný, Michal
+ Strauss, David Tardon, Dimitri John Ledkov, Dmitry Torokhov, dj-kaktus,
+ Dongsu Park, Elias Probst, Emil Soleyman, Erik Kooistra, Ervin Peters,
+ Evgeni Golov, Evgeny Vereshchagin, Fabrice Fontaine, Faheel Ahmad,
+ Faizal Luthfi, Felix Yan, Filipe Brandenburger, Franck Bui, Frank
+ Schaefer, Frantisek Sumsal, Gautier Husson, Gianluca Boiano, Giuseppe
+ Scrivano, glitsj16, Hans de Goede, Harald Hoyer, Harry Mallon, Harshit
+ Jain, Helmut Grohne, Henry Tung, Hui Yiqun, imayoda, Insun Pyo, Iwan
+ Timmer, Jan Janssen, Jan Pokorný, Jan Synacek, Jason A. Donenfeld,
+ javitoom, Jérémy Nouhaud, Jeremy Su, Jiuyang Liu, João Paulo Rechi
+ Vita, Joe Hershberger, Joe Rayhawk, Joerg Behrmann, Joerg Steffens,
+ Jonas Dorel, Jon Ringle, Josh Soref, Julian Andres Klode, Jun Bo Bi,
+ Jürg Billeter, Keith Busch, Khem Raj, Kirill Marinushkin, Larry
+ Bernstone, Lennart Poettering, Lion Yang, Li Song, Lorenz
+ Hübschle-Schneider, Lubomir Rintel, Lucas Werkmeister, Ludwin Janvier,
+ Lukáš Nykrýn, Luke Shumaker, mal, Marc-Antoine Perennou, Marcin
+ Skarbek, Marco Trevisan (Treviño), Marian Cepok, Mario Hros, Marko
+ Myllynen, Markus Grimm, Martin Pitt, Martin Sobotka, Martin Wilck,
+ Mathieu Trudel-Lapierre, Matthew Leeds, Michael Biebl, Michael Olbrich,
+ Michael 'pbone' Pobega, Michael Scherer, Michal Koutný, Michal
Sekletar, Michal Soltys, Mike Gilbert, Mike Palmer, Muhammet Kara, Neal
Gompa, Neil Brown, Network Silence, Niklas Tibbling, Nikolas Nyby,
Nogisaka Sadata, Oliver Smith, Patrik Flykt, Pavel Hrdina, Paweł
Xiang Fan, Xi Ruoyao, Xuanwo, Yann E. Morin, YmrDtnJu, Yu Watanabe,
Zbigniew Jędrzejewski-Szmek, Zhang Xianwei, Zsolt Dollenstein
- — Somewhere, 2018-12-yy
+ — Warsaw, 2018-12-21
CHANGES WITH 239:
not created by systemd-sysusers anymore.
NOTE: This has a chance of breaking nss-ldap and similar NSS modules
- that embedd a network facing module into any process using getpwuid()
+ that embed a network facing module into any process using getpwuid()
or related call: the dynamic allocation of the user ID for
systemd-resolved.service means the service manager has to check NSS
if the user name is already taken when forking off the service. Since
PrivateDevices=, ProtectSystem=, …) are used. This option is hence
primarily useful for services that do not use any of the other file
system namespacing options. One such service is systemd-udevd.service
- wher this is now used by default.
+ where this is now used by default.
* ConditionSecurity= gained a new value "uefi-secureboot" that is true
when the system is booted in UEFI "secure mode".
allows ordering services before the service that executes the actual
update process in a generic way.
+ * Systemd now emits warnings whenever .include syntax is used.
+
Contributions from: Adam Duskett, Alan Jenkins, Alessandro Casale,
Alexander Kurtz, Alex Gartrell, Anssi Hannula, Arnaud Rebillout, Brian
J. Murrell, Bruno Vernay, Chris Lamb, Chris Lesiak, Christian Brauner,
instance to migrate processes if it itself gets the request to
migrate processes and the kernel refuses this due to access
restrictions. Thanks to this "systemd-run --scope --user …" works
- again in pure cgroups v2 environments when invoked from the user
+ again in pure cgroup v2 environments when invoked from the user
session scope.
* A new TemporaryFileSystem= setting can be used to mask out part of
systemd-logind to be safe. See
https://cgit.freedesktop.org/xorg/xserver/commit/?id=dc48bd653c7e101.)
- * All kernel install plugins are called with the environment variable
+ * All kernel-install plugins are called with the environment variable
KERNEL_INSTALL_MACHINE_ID which is set to the machine ID given by
- /etc/machine-id. If the file is missing or empty, the variable is
- empty and BOOT_DIR_ABS is the path of a temporary directory which is
- removed after all the plugins exit. So, if KERNEL_INSTALL_MACHINE_ID
- is empty, all plugins should not put anything in BOOT_DIR_ABS.
+ /etc/machine-id. If the machine ID could not be determined,
+ $KERNEL_INSTALL_MACHINE_ID will be empty. Plugins should not put
+ anything in the entry directory (passed as the second argument) if
+ $KERNEL_INSTALL_MACHINE_ID is empty. For backwards compatibility, a
+ temporary directory is passed as the entry directory and removed
+ after all the plugins exit.
Contributions from: Adrian Heine né Lang, Aggelos Avgerinos, Alexander
Kurtz, Alexandros Frantzis, Alexey Brodkin, Alex Lu, Amir Pakdel, Amir
desired options.
* systemd now supports the "memory" cgroup controller also on
- cgroupsv2.
+ cgroup v2.
* The systemd-cgtop tool now optionally takes a control group path as
command line argument. If specified, the control group list shown is
* We temporarily dropped the "-l" switch for fsck invocations,
since they collide with the flock() logic above. util-linux
upstream has been changed already to avoid this conflict,
- and we will readd "-l" as soon as util-linux with this
+ and we will re-add "-l" as soon as util-linux with this
change has been released.
* The dependency on libattr has been removed. Since a long
* Socket units gained a new Symlinks= setting. It takes a list
of symlinks to create to file system sockets or FIFOs
created by the specific Unix sockets. This is useful to
- manage symlinks to socket nodes with the same life-cycle as
+ manage symlinks to socket nodes with the same lifecycle as
the socket itself.
* The /dev/log socket and /dev/initctl FIFO have been moved to
where the local administrator's configuration in /etc always
overrides any other settings.
- Contributions fron: Ali H. Caliskan, Alison Chaiken, Bas van
+ Contributions from: Ali H. Caliskan, Alison Chaiken, Bas van
den Berg, Brandon Philips, Cristian Rodríguez, Daniel Buch,
Dan Kilman, Dave Reisner, David Härdeman, David Herrmann,
David Strauss, Dimitris Spingos, Djalal Harouni, Eelco
users who are logged out cannot continue to consume IPC
resources. This covers SysV memory, semaphores and message
queues as well as POSIX shared memory and message
- queues. Traditionally, SysV and POSIX IPC had no life-cycle
+ queues. Traditionally, SysV and POSIX IPC had no lifecycle
limits. With this functionality, that is corrected. This may
be turned off by using the RemoveIPC= switch of logind.conf.
systemd-networkd.
* The sd-bus.h bus API gained a new sd_bus_track object for
- tracking the life-cycle of bus peers. Note that sd-bus.h is
+ tracking the lifecycle of bus peers. Note that sd-bus.h is
still not a public API though (unless you specify
--enable-kdbus on the configure command line, which however
voids your warranty and you get no API stability guarantee).
IFUNC. Please make sure to use --enable-compat-libs only
during a transitional period!
+ * The .include syntax has been deprecated and is not documented
+ anymore. Drop-in files in .d directories should be used instead.
+
Contributions from: Andreas Fuchs, Armin K., Colin Walters,
Daniel Mack, Dave Reisner, David Herrmann, Djalal Harouni,
Holger Schurig, Jason A. Donenfeld, Jason St. John, Jasper
projects / thirdparty / systemd.git / blobdiff