systemd System and Service Manager
+CHANGES WITH 240 in spe:
+
+ * NoNewPrivileges=yes has been set for all long-running services
+ implemented by systemd. Previously, this was problematic due to
+ SELinux (as this would also prohibit the transition from PID1's label
+ to the service's label). This restriction has since been lifted, but
+ an SELinux policy update is required.
+ (See e.g. https://github.com/fedora-selinux/selinux-policy/pull/234.)
+
+ * DynamicUser=yes is dropped from systemd-networkd.service,
+ systemd-resolved.service and systemd-timesyncd.service, which was
+ enabled in v239 for systemd-networkd.service and systemd-resolved.service,
+ and since v236 for systemd-timesyncd.service. The users and groups
+ systemd-network, systemd-resolve and systemd-timesync are created
+ by systemd-sysusers again. Distributors or system administrators
+ may need to create these users and groups if they not exist (or need
+ to re-enable DynamicUser= for those units) while upgrading systemd.
+
+ * When unit files are loaded from disk, previously systemd would
+ sometimes (depending on the unit loading order) load units from the
+ target path of symlinks in .wants/ or .requires/ directories of other
+ units. This meant that unit could be loaded from different paths
+ depending on whether the unit was requested explicitly or as a
+ dependency of another unit, not honouring the priority of directories
+ in search path. It also meant that it was possible to successfully
+ load and start units which are not found in the unit search path, as
+ long as they were requested as a dependency and linked to from
+ .wants/ or .requires/. The target paths of those symlinks are not
+ used for loading units anymore and the unit file must be found in
+ the search path.
+
+ * A new service type has been added: Type=exec. It's very similar to
+ Type=simple but ensures the service manager will wait for both fork()
+ and execve() of the main service binary to complete before proceeding
+ with follow-up units. This is primarily useful so that the manager
+ propagates any errors in the preparation phase of service execution
+ back to the job that requested the unit to be started. For example,
+ consider a service that has ExecStart= set to a file system binary
+ that doesn't exist. With Type=simple starting the unit would be
+ considered instantly successful, as only fork() has to complete
+ successfully and the manager does not wait for execve(), and hence
+ its failure is seen "too late". With the new Type=exec service type
+ starting the unit will fail, as the manager will wait for the
+ execve() and notice its failure, which is then propagated back to the
+ start job.
+
+ NOTE: with the next release 241 of systemd we intend to change the
+ systemd-run tool to default to Type=exec for transient services
+ started by it. This should be mostly safe, but in specific corner
+ cases might result in problems, as the systemd-run tool will then
+ block on NSS calls (such as user name look-ups due to User=) done
+ between the fork() and execve(), which under specific circumstances
+ might cause problems. It is recommended to specify "-p Type=simple"
+ explicitly in the few cases where this applies. For regular,
+ non-transient services (i.e. those defined with unit files on disk)
+ we will continue to default to Type=simple.
+
+ * The Linux kernel's current default RLIMIT_NOFILE resource limit for
+ userspace processes is set to 1024 (soft) and 4096
+ (hard). Previously, systemd passed this on unmodified to all
+ processes it forked off. With this systemd release the hard limit
+ systemd passes on is increased to 512K, overriding the kernel's
+ defaults and substantially increasing the number of simultaneous file
+ descriptors unprivileged userspace processes can allocate. Note that
+ the soft limit remains at 1024 for compatibility reasons: the
+ traditional UNIX select() call cannot deal with file descriptors >=
+ 1024 and increasing the soft limit globally might thus result in
+ programs unexpectedly allocating a high file descriptor and thus
+ failing abnormally when attempting to use it with select() (of
+ course, programs shouldn't use select() anymore, and prefer
+ poll()/epoll, but the call unfortunately remains undeservedly popular
+ at this time). This change reflects the fact that file descriptor
+ handling in the Linux kernel has been optimized in more recent
+ kernels and allocating large numbers of them should be much cheaper
+ both in memory and in performance than it used to be. Programs that
+ want to take benefit of the increased limit have to "opt-in" into
+ high file descriptors explicitly by raising their soft limit. Of
+ course, when they do that they must acknowledge that they cannot use
+ select() anymore (and neither can any shared library they use — or
+ any shared library used by any shared library they use and so on).
+ Which default hard limit is most appropriate is of course hard to
+ decide. However, given reports that ~300K file descriptors are used
+ in real-life applications we believe 512K is sufficiently high as new
+ default for now. Note that there are also reports that using very
+ high hard limits (e.g. 1G) is problematic: some software allocates
+ large arrays with one element for each potential file descriptor
+ (Java, …) — a high hard limit thus triggers excessively large memory
+ allocations in these applications. Hopefully, the new default of 512K
+ is a good middle ground: higher than what real-life applications
+ currently need, and low enough for avoid triggering excessively large
+ allocations in problematic software. (And yes, somebody should fix
+ Java.)
+
+ * The fs.nr_open and fs.file-max sysctls are now automatically bumped
+ to the highest possible values, as separate accounting of file
+ descriptors is no longer necessary, as memcg tracks them correctly as
+ part of the memory accounting anyway. Thus, from the four limits on
+ file descriptors currently enforced (fs.file-max, fs.nr_open,
+ RLIMIT_NOFILE hard, RLIMIT_NOFILE soft) we turn off the first two,
+ and keep only the latter two. A set of build-time options
+ (-Dbump-proc-sys-fs-file-max=no and -Dbump-proc-sys-fs-nr-open=no)
+ has been added to revert this change in behaviour, which might be
+ an option for systems that turn off memcg in the kernel.
+
+ * When no /etc/locale.conf file exists (and hence no locale settings
+ are in place), systemd will now use the "C.UTF-8" locale by default,
+ and set LANG= to it. This locale is supported by various
+ distributions including Fedora, with clear indications that upstream
+ glibc is going to make it available too. This locale enables UTF-8
+ mode by default, which appears appropriate for 2018.
+
+ * The "net.ipv4.conf.all.rp_filter" sysctl will now be set to 2 by
+ default. This effectively switches the RFC3704 Reverse Path filtering
+ from Strict mode to Loose mode. This is more appropriate for hosts
+ that have multiple links with routes to the same networks (e.g.
+ a client with a Wi-Fi and Ethernet both connected to the internet).
+
+ Consult the kernel documentation for details on this sysctl:
+ https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt
+
+ * CPUAccounting=yes no longer enables the CPU controller when using
+ kernel 4.15+ and the unified cgroup hierarchy, as required accounting
+ statistics are now provided independently from the CPU controller.
+
+ * Support for disabling a particular cgroup controller within a sub-tree
+ has been added through the DisableControllers= directive.
+
+ * The new "MemoryMin=" unit file property may now be used to set the
+ memory usage protection limit of processes invoked by the unit. This
+ controls the cgroupsv2 memory.min attribute. Similarly, the new
+ "IODeviceLatencyTargetSec=" property has been added, wrapping the new
+ cgroupsv2 io.latency cgroup property for configuring per-service I/O
+ latency.
+
+ * systemd now supports the cgroupsv2 devices BPF logic, as counterpart
+ to the cgroupsv1 "devices" cgroup controller.
+
+ * systemd-escape now is able to combine --unescape with --template. It
+ also learnt a new option --instance for extracting and unescaping the
+ instance part of a unit name.
+
+ * sd-bus now provides the sd_bus_message_readv() which is similar to
+ sd_bus_message_read() but takes a va_list object. The pair
+ sd_bus_set_method_call_timeout() and sd_bus_get_method_call_timeout()
+ has been added for configuring the default method call timeout to
+ use. sd_bus_error_move() may be used to efficiently move the contents
+ from one sd_bus_error structure to another, invalidating the
+ source. sd_bus_set_close_on_exit() and sd_bus_get_close_on_exit() may
+ be used to control whether a bus connection object is automatically
+ flushed when an sd-event loop is exited.
+
+ * When processing classic BSD syslog log messages, journald will now
+ save the original time-stamp string supplied in the new
+ SYSLOG_TIMESTAMP= journal field. This permits consumers to
+ reconstruct the original BSD syslog message more correctly.
+
+ * StandardOutput=/StandardError= in service files gained support for
+ new "append:…" parameters, for connecting STDOUT/STDERR of a service
+ to a file, and appending to it.
+
+ * The signal to use as last step of killing of unit processes is now
+ configurable. Previously it was hard-coded to SIGKILL, which may now
+ be overridden with the new KillSignal= setting. Note that this is the
+ signal used when regular termination (i.e. SIGTERM) does not suffice.
+ Similarly, the signal used when aborting a program in case of a
+ watchdog timeout may now be configured too (WatchdogSignal=).
+
+ * The XDG_SESSION_DESKTOP environment variable may now be configured in
+ the pam_systemd argument line, using the new desktop= switch. This is
+ useful to initialize it properly from a display manager without
+ having to touch C code.
+
+ * Most configuration options that previously accepted percentage values
+ now also accept permille values with the '‰' suffix (instead of '%').
+
+ * systemd-logind will offer hibernation only if the currently used
+ kernel image is still available on disk.
+
+ * systemd-resolved may now optionally use OpenSSL instead of GnuTLS for
+ DNS-over-TLS.
+
+ * systemd-resolved's configuration file resolved.conf gained a new
+ option ReadEtcHosts= which may be used to turn off processing and
+ honoring /etc/hosts entries.
+
+ * The "--wait" switch may now be passed to "systemctl
+ is-system-running", in which case the tool will synchronously wait
+ until the system finished start-up.
+
+ * hostnamed gained a new bus call to determine the DMI product UUID.
+
+ * On x86-64 systemd will now prefer using the RDRAND processor
+ instruction over /dev/urandom whenever it requires randomness that
+ neither has to be crypto-grade nor should be reproducible. This
+ should substantially reduce the amount of entropy systemd requests
+ from the kernel during initialization on such systems, though not
+ reduce it to zero. (Why not zero? systemd still needs to allocate
+ UUIDs and such uniquely, which require high-quality randomness.)
+
+ * networkd gained support for Foo-Over-UDP, ERSPAN and ISATAP
+ tunnels. It also gained a new option ForceDHCPv6PDOtherInformation=
+ for forcing the "Other Information" bit in IPv6 RA messages. The
+ bonding logic gained four new options AdActorSystemPriority=,
+ AdUserPortKey=, AdActorSystem= for configuring various 802.3ad
+ aspects, and DynamicTransmitLoadBalancing= for enabling dynamic
+ shuffling of flows. The tunnel logic gained a new
+ IPv6RapidDeploymentPrefix= option for configuring IPv6 Rapid
+ Deployment. The policy rule logic gained four new options IPProtocol=,
+ SourcePort= and DestinationPort=, InvertRule=. The bridge logic gained
+ support for the MulticastToUnicast= option. networkd also gained
+ support for configuring static IPv4 ARP or IPv6 neighbor entries.
+
+ * .preset files (as read by 'systemctl preset') may now be used to
+ instantiate services.
+
+ * /etc/crypttab now understands the sector-size= option to configure
+ the sector size for an encrypted partition.
+
+ * Key material for encrypted disks may now be placed on a formatted
+ medium, and referenced from /etc/crypttab by the UUID of the file
+ system, followed by "=" suffixed by the path to the key file.
+
+ * The "collect" udev component has been removed without replacement, as
+ it is neither used nor maintained.
+
+ * When the RuntimeDirectory=, StateDirectory=, CacheDirectory=,
+ LogsDirectory=, ConfigurationDirectory= settings are used in a
+ service the executed processes will now receive a set of environment
+ variables containing the full paths of these directories.
+ Specifically, RUNTIME_DIRECTORY=, STATE_DIRECTORY, CACHE_DIRECTORY,
+ LOGS_DIRECTORY, CONFIGURATION_DIRECTORY are now set if these options
+ are used. Note that these options may be used multiple times per
+ service in which case the resulting paths will be concatenated and
+ separated by colons.
+
+ * Predictable interface naming has been extended to cover InfiniBand
+ NICs. They will be exposed with an "ib" prefix.
+
+ * tmpfiles.d/ line types may now be suffixed with a '-' character, in
+ which case the respective line failing is ignored.
+
+ * .link files may now be used to configure the equivalent to the
+ "ethtool advertise" commands.
+
+ * The sd-device.h and sd-hwdb.h APIs are now exported, as an
+ alternative to libudev.h. Previously, the latter was just an internal
+ wrapper around the former, but now these two APIs are exposed
+ directly.
+
+ * sd-id128.h gained a new function sd_id128_get_boot_app_specific()
+ which calculates an app-specific boot ID similar to how
+ sd_id128_get_machine_app_specific() generates an app-specific machine
+ ID.
+
+ * A new tool systemd-id128 has been added that can be used to determine
+ and generate various 128bit IDs.
+
+ * /etc/os-release gained two new standardized fields DOCUMENTATION_URL=
+ and LOGO=.
+
+ * systemd-hibernate-resume-generator will now honor the "noresume"
+ kernel command line option, in which case it will bypass resuming
+ from any hibernated image.
+
+ * The systemd-sleep.conf configuration file gained new options
+ AllowSuspend=, AllowHibernation=, AllowSuspendThenHibernate=,
+ AllowHybridSleep= for prohibiting specific sleep modes even if the
+ kernel exports them.
+
+ * portablectl is now officially supported and has thus moved to
+ /usr/bin/.
+
+ * bootctl learnt the two new commands "set-default" and "set-oneshot"
+ for setting the default boot loader item to boot to (either
+ persistently or only for the next boot). This is currently only
+ compatible with sd-boot, but may be implemented on other boot loaders
+ too, that follow the boot loader interface. The updated interface is
+ now documented here:
+
+ https://systemd.io/BOOT_LOADER_INTERFACE
+
+ * A new kernel command line option systemd.early_core_pattern= is now
+ understood which may be used to influence the core_pattern PID 1
+ installs during early boot.
+
+ * busctl learnt two new options -j and --json= for outputting method
+ call replies, properties and monitoring output in JSON.
+
+ * journalctl's JSON output now supports simple ANSI coloring as well as
+ a new "json-seq" mode for generating RFC7464 output.
+
+ * Unit files now support the %g/%G specifiers that resolve to the UNIX
+ group/GID of the service manager runs as, similar to the existing
+ %u/%U specifiers that resolve to the UNIX user/UID.
+
+ * systemd-logind learnt a new global configuration option
+ UserStopDelaySec= that may be set in logind.conf. It specifies how
+ long the systemd --user instance shall remain started after a user
+ logs out. This is useful to speed up repetitive re-connections of the
+ same user, as it means the user's service manager doesn't have to be
+ stopped/restarted on each iteration, but can be reused between
+ subsequent options. This setting defaults to 10s. systemd-logind also
+ exports two new properties on its Manager D-Bus objects indicating
+ whether the system's lid is currently closed, and whether the system
+ is on AC power.
+
+ * systemd gained support for a generic boot counting logic, which
+ generically permits automatic reverting to older boot loader entries
+ if newer updated ones don't work. The boot loader side is implemented
+ in sd-boot, but is kept open for other boot loaders too. For details
+ see:
+
+ https://systemd.io/AUTOMATIC_BOOT_ASSESSMENT
+
+ * The SuccessAction=/FailureAction= unit file settings now learnt two
+ new parameters: "exit" and "exit-force", which result in immediate
+ exiting of the service manager, and are only useful in systemd --user
+ and container environments.
+
+ * Unit files gained support for a pair of options
+ FailureActionExitStatus=/SuccessActionExitStatus= for configuring the
+ exit status to use as service manager exit status when
+ SuccessAction=/FailureAction= is set to exit or exit-force.
+
+ * A pair of LogRateLimitIntervalSec=/LogRateLimitBurst= per-service
+ options may now be used to configure the log rate limiting applied by
+ journald per-service.
+
+ * systemd-analyze gained a new verb "timespan" for parsing and
+ normalizing time span values (i.e. strings like "5min 7s 8us").
+
+ * systemd-analyze also gained a new verb "security" for analyzing the
+ security and sand-boxing settings of services in order to determine an
+ "exposure level" for them, indicating whether a service would benefit
+ from more sand-boxing options turned on for them.
+
+ * "systemd-analyze syscall-filter" will now also show system calls
+ supported by the local kernel but not included in any of the defined
+ groups.
+
+ * .nspawn files now understand the Ephemeral= setting, matching the
+ --ephemeral command line switch.
+
+ * sd-event gained the new APIs sd_event_source_get_floating() and
+ sd_event_source_set_floating() for controlling whether a specific
+ event source is "floating", i.e. destroyed along with the even loop
+ object itself.
+
+ * Unit objects on D-Bus gained a new "Refs" property that lists all
+ clients that currently have a reference on the unit (to ensure it is
+ not unloaded).
+
+ * The JoinControllers= option in system.conf is no longer supported, as
+ it didn't work correctly, is hard to support properly, is legacy (as
+ the concept only exists on cgroupsv1) and apparently wasn't used.
+
+ * Journal messages that are generated whenever a unit enters the failed
+ state are now tagged with a unique MESSAGE_ID. Similarly, messages
+ generated whenever a service process exits are now made recognizable,
+ too. A taged message is also emitted whenever a unit enters the
+ "dead" state on success.
+
+ * systemd-run gained a new switch --working-directory= for configuring
+ the working directory of the service to start. A shortcut -d is
+ equivalent, setting the working directory of the service to the
+ current working directory of the invoking program. The new --shell
+ (or just -S) option has been added for invoking the $SHELL of the
+ caller as a service, and implies --pty --same-dir --wait --collect
+ --service-type=exec. Or in other words, "systemd-run -S" is now the
+ quickest way to quickly get an interactive in a fully clean and
+ well-defined system service context.
+
+ * machinectl gained a new verb "import-fs" for importing an OS tree
+ from a directory. Moreover, when a directory or tarball is imported
+ and single top-level directory found with the OS itself below the OS
+ tree is automatically mangled and moved one level up.
+
+ * systemd-importd will no longer set up an implicit btrfs loop-back
+ file system on /var/lib/machines. If one is already set up, it will
+ continue to be used.
+
+ * A new generator "systemd-run-generator" has been added. It will
+ synthesize a unit from one or more program command lines included in
+ the kernel command line. This is very useful in container managers
+ for example:
+
+ # systemd-nspawn -i someimage.raw -b systemd.run='"some command line"'
+
+ This will run "systemd-nspawn" on an image, invoke the specified
+ command line and immediately shut down the container again, returning
+ the command line's exit code.
+
+ * The block device locking logic is now documented:
+
+ https://systemd.io/BLOCK_DEVICE_LOCKING
+
+ * loginctl and machinectl now optionally output the various tables in
+ JSON using the --output= switch. It is our intention to add similar
+ support to systemctl and all other commands.
+
+ * udevadm's query and trigger verb now optionally take a .device unit
+ name as argument.
+
+ * systemd-udevd's network naming logic now understands a new
+ net.naming-scheme= kernel command line switch, which may be used to
+ pick a specific version of the naming scheme. This helps stabilizing
+ interface names even as systemd/udev are updated and the naming logic
+ is improved.
+
+ * sd-id128.h learnt two new auxiliary helpers: sd_id128_is_allf() and
+ SD_ID128_ALLF to test if a 128bit ID is set to all 0xFF bytes, and to
+ initialize one to all 0xFF.
+
+ * After loading the SELinux policy systemd will now recursively relabel
+ all files and directories listed in
+ /run/systemd/relabel-extra.d/*.relabel (which should be simple
+ newline separated lists of paths) in addition to the ones it already
+ implicitly relabels in /run, /dev and /sys. After the relabelling is
+ completed the *.relabel files (and /run/systemd/relabel-extra.d/) are
+ removed. This is useful to permit initrds (i.e. code running before
+ the SELinux policy is in effect) to generate files in the host
+ filesystem safely and ensure that the correct label is applied during
+ the transition to the host OS.
+
+ * KERNEL API BREAKAGE: Linux kernel 4.18 changed behaviour regarding
+ mknod() handling in user namespaces. Previously mknod() would always
+ fail with EPERM in user namespaces. Since 4.18 mknod() will succeed
+ but device nodes generated that way cannot be opened, and attempts to
+ open them result in EPERM. This breaks the "graceful fallback" logic
+ in systemd's PrivateDevices= sand-boxing option. This option is
+ implemented defensively, so that when systemd detects it runs in a
+ restricted environment (such as a user namespace, or an environment
+ where mknod() is blocked through seccomp or absence of CAP_SYS_MKNOD)
+ where device nodes cannot be created the effect of PrivateDevices= is
+ bypassed (following the logic that 2nd-level sand-boxing is not
+ essential if the system systemd runs in is itself already sand-boxed
+ as a whole). This logic breaks with 4.18 in container managers where
+ user namespacing is used: suddenly PrivateDevices= succeeds setting
+ up a private /dev/ file system containing devices nodes — but when
+ these are opened they don't work.
+
+ At this point is is recommended that container managers utilizing
+ user namespaces that intend to run systemd in the payload explicitly
+ block mknod() with seccomp or similar, so that the graceful fallback
+ logic works again.
+
+ We are very sorry for the breakage and the requirement to change
+ container configurations for newer kernels. It's purely caused by an
+ incompatible kernel change. The relevant kernel developers have been
+ notified about this userspace breakage quickly, but they chose to
+ ignore it.
+
+ Contributions from: afg, Alan Jenkins, Aleksei Timofeyev, Alexander
+ Filippov, Alexander Kurtz, Alexey Bogdanenko, Andreas Henriksson,
+ Andrew Jorgensen, Anita Zhang, apnix-uk, Arkan49, Arseny Maslennikov,
+ asavah, Asbjørn Apeland, aszlig, Bastien Nocera, Ben Boeckel, Benedikt
+ Morbach, Benjamin Berg, Bruce Zhang, Carlo Caione, Cedric Viou, Chen
+ Qi, Chris Chiu, Chris Down, Chris Morin, Christian Rebischke, Claudius
+ Ellsel, Colin Guthrie, dana, Daniel, Daniele Medri, Daniel Kahn
+ Gillmor, Daniel Rusek, Daniel van Vugt, Dariusz Gadomski, Dave Reisner,
+ David Anderson, Davide Cavalca, David Leeds, David Malcolm, David
+ Strauss, David Tardon, Dimitri John Ledkov, dj-kaktus, Dongsu Park,
+ Elias Probst, Emil Soleyman, Erik Kooistra, Ervin Peters, Evgeni Golov,
+ Evgeny Vereshchagin, Fabrice Fontaine, Faheel Ahmad, Faizal Luthfi,
+ Felix Yan, Filipe Brandenburger, Franck Bui, Frank Schaefer, Frantisek
+ Sumsal, Gautier Husson, Gianluca Boiano, Giuseppe Scrivano, glitsj16,
+ Hans de Goede, Harald Hoyer, Harry Mallon, Harshit Jain, Helmut Grohne,
+ Henry Tung, Hui Yiqun, imayoda, Insun Pyo, Iwan Timmer, Jan Janssen,
+ Jan Pokorný, Jan Synacek, Jason A. Donenfeld, javitoom, Jérémy Nouhaud,
+ Jiuyang Liu, João Paulo Rechi Vita, Joe Hershberger, Joe Rayhawk, Joerg
+ Behrmann, Joerg Steffens, Jonas Dorel, Jon Ringle, Josh Soref, Julian
+ Andres Klode, Jun Bo Bi, Jürg Billeter, Keith Busch, Khem Raj, Kirill
+ Marinushkin, Larry Bernstone, Lennart Poettering, Lion Yang, Li Song,
+ Lorenz Hübschle-Schneider, Lubomir Rintel, Lucas Werkmeister, Ludwin
+ Janvier, Lukáš Nykrýn, Luke Shumaker, mal, Marc-Antoine Perennou,
+ Marcin Skarbek, Marco Trevisan (Treviño), Marian Cepok, Mario Hros,
+ Marko Myllynen, Markus Grimm, Martin Pitt, Martin Sobotka, Martin
+ Wilck, Mathieu Trudel-Lapierre, Matthew Leeds, Michael Biebl, Michael
+ Olbrich, Michael 'pbone' Pobega, Michael Scherer, Michal Koutný, Michal
+ Sekletar, Michal Soltys, Mike Gilbert, Mike Palmer, Muhammet Kara, Neal
+ Gompa, Neil Brown, Network Silence, Niklas Tibbling, Nikolas Nyby,
+ Nogisaka Sadata, Oliver Smith, Patrik Flykt, Pavel Hrdina, Paweł
+ Szewczyk, Peter Hutterer, Piotr Drąg, Ray Strode, Reinhold Mueller,
+ Renaud Métrich, Roman Gushchin, Ronny Chevalier, Rubén Suárez Alvarez,
+ Ruixin Bao, RussianNeuroMancer, Ryutaroh Matsumoto, Saleem Rashid, Sam
+ Morris, Samuel Morris, Sandy Carter, scootergrisen, Sébastien Bacher,
+ Sergey Ptashnick, Shawn Landden, Shengyao Xue, Shih-Yuan Lee
+ (FourDollars), Silvio Knizek, Sjoerd Simons, Stasiek Michalski, Stephen
+ Gallagher, Steven Allen, Steve Ramage, Susant Sahani, Sven Joachim,
+ Sylvain Plantefève, Tanu Kaskinen, Tejun Heo, Thiago Macieira, Thomas
+ Blume, Thomas Haller, Thomas H. P. Andersen, Tim Ruffing, TJ, Tobias
+ Jungel, Todd Walton, Tommi Rantala, Tomsod M, Tony Novak, Tore
+ Anderson, Trevonn, Victor Laskurain, Victor Tapia, Violet Halo, Vojtech
+ Trefny, welaq, William A. Kennington III, William Douglas, Wyatt Ward,
+ Xiang Fan, Xi Ruoyao, Xuanwo, Yann E. Morin, YmrDtnJu, Yu Watanabe,
+ Zbigniew Jędrzejewski-Szmek, Zhang Xianwei, Zsolt Dollenstein
+
+ — Somewhere, 2018-12-yy
+
CHANGES WITH 239:
* NETWORK INTERFACE DEVICE NAMING CHANGES: systemd-udevd's "net_id"
* systemd-resolved.service and systemd-networkd.service now set
DynamicUser=yes. The users systemd-resolve and systemd-network are
- not created by systemd-sysusers.
+ not created by systemd-sysusers anymore.
+
+ NOTE: This has a chance of breaking nss-ldap and similar NSS modules
+ that embedd a network facing module into any process using getpwuid()
+ or related call: the dynamic allocation of the user ID for
+ systemd-resolved.service means the service manager has to check NSS
+ if the user name is already taken when forking off the service. Since
+ the user in the common case won't be defined in /etc/passwd the
+ lookup is likely to trigger nss-ldap which in turn might use NSS to
+ ask systemd-resolved for hostname lookups. This will hence result in
+ a deadlock: a user name lookup in order to start
+ systemd-resolved.service will result in a host name lookup for which
+ systemd-resolved.service needs to be started already. There are
+ multiple ways to work around this problem: pre-allocate the
+ "systemd-resolve" user on such systems, so that nss-ldap won't be
+ triggered; or use a different NSS package that doesn't do networking
+ in-process but provides a local asynchronous name cache; or configure
+ the NSS package to avoid lookups for UIDs in the range `pkg-config
+ systemd --variable=dynamicuidmin` … `pkg-config systemd
+ --variable=dynamicuidmax`, so that it does not consider itself
+ authoritative for the same UID range systemd allocates dynamic users
+ from.
* The systemd-resolve tool has been renamed to resolvectl (it also
remains available under the old name, for compatibility), and its
Debian and FreeBSD resolvconf tool.
* Support for suspend-then-hibernate has been added, i.e. a sleep mode
- where the system initially suspends, and after a time-out resumes and
+ where the system initially suspends, and after a timeout resumes and
hibernates again.
* networkd's ClientIdentifier= now accepts a new option "duid-only". If
* New documentation has been added to document cgroups delegation,
portable services and the various code quality tools we have set up:
- https://github.com/systemd/systemd/blob/master/doc/CGROUP_DELEGATION.md
- https://github.com/systemd/systemd/blob/master/doc/PORTABLE_SERVICES.md
- https://github.com/systemd/systemd/blob/master/doc/CODE_QUALITY.md
+ https://github.com/systemd/systemd/blob/master/docs/CGROUP_DELEGATION.md
+ https://github.com/systemd/systemd/blob/master/docs/PORTABLE_SERVICES.md
+ https://github.com/systemd/systemd/blob/master/docs/CODE_QUALITY.md
* The Boot Loader Specification has been added to the source tree.
- https://github.com/systemd/systemd/blob/master/doc/BOOT_LOADER_SPECIFICATION.md
+ https://github.com/systemd/systemd/blob/master/docs/BOOT_LOADER_SPECIFICATION.md
While moving it into our source tree we have updated it and further
changes are now accepted through the usual github PR workflow.
different from what the documentation said, and not particularly
useful, as repeated systemd-tmpfiles invocations would not be
idempotent and grow such files without bounds. With this release
- behaviour has been altered slightly, to match what the documentation
- says: lines of this type only have an effect if the indicated files
- don't exist yet, and only then the argument string is written to the
- file.
+ behaviour has been altered to match what the documentation says:
+ lines of this type only have an effect if the indicated files don't
+ exist yet, and only then the argument string is written to the file.
* FUTURE INCOMPATIBILITY: In systemd v238 we intend to slightly change
systemd-tmpfiles behaviour: previously, read-only files owned by root
* Documentation has been added that lists all of systemd's low-level
environment variables:
- https://github.com/systemd/systemd/blob/master/doc/ENVIRONMENT.md
+ https://github.com/systemd/systemd/blob/master/docs/ENVIRONMENT.md
* sd-daemon gained a new API sd_is_socket_sockaddr() for determining
whether a specific socket file descriptor matches a specified socket
/run/systemd/user directory that was already previously
supported, but is under the control of the user.
- * Job timeouts (i.e. time-outs on the time a job that is
+ * Job timeouts (i.e. timeouts on the time a job that is
queued stays in the run queue) can now optionally result in
immediate reboot or power-off actions (JobTimeoutAction= and
JobTimeoutRebootArgument=). This is useful on ".target"
projects / thirdparty / systemd.git / blobdiff