discussions with the upstream control group maintainers we learnt
that the negative impact of cgroup memory accounting on current
kernels is finally relatively minimal, so that it should be safe to
- enable this by default without affecting system performance too
- much. Besides memory accounting only tasks accounting is turned on by
- default, all other forms of resource accounting (CPU, IO, IP) remain
- off for now, because it's not clear yet that their impact is small
- enough to move from opt-in to opt-out for them, too. We recommend
- downstreams to leave memory accounting on by default, however in some
- situations it might be wise to revert this change of defaults, in
- particular on very resource constrained systems or when support for
- old kernels is a necessity.
+ enable this by default without affecting system performance. Besides
+ memory accounting only task accounting is turned on by default, all
+ other forms of resource accounting (CPU, IO, IP) remain off for now,
+ because it's not clear yet that their impact is small enough to move
+ from opt-in to opt-out. We recommend downstreams to leave memory
+ accounting on by default if kernel 4.14 or higher is are primarily
+ used. On very resource constrained systems or when support for old
+ kernels is a necessity, -Dmemory-accounting-default=false can be used
+ to revert this change.
+
+ * rpm scriptlets to update the udev hwdb and rules (%udev_hwdb_update,
+ %udev_rules_update) and the journal catalog (%journal_catalog_update)
+ from the upgrade scriptlets of individual packages now do nothing.
+ Transfiletriggers have been added which will perform those updates
+ once at the end of the transaction.
+
+ Similar transfiletriggers have been added to execute any sysctl.d
+ and binfmt.d rules. Thus, it should be unnecessary to provide any
+ scriptlets to execute this configuration from package installation
+ scripts.
+
+ * systemd-sysusers gained a mode where the configuration to execute is
+ specified on the command line, but this configuration is not executed
+ directly, but instead it is merged with the configuration on disk,
+ and the result is executed. This is useful for package installation
+ scripts which want to create the user before installing any files on
+ disk (in case some of those files are owned by that user), while
+ still allowing local admin overrides.
+
+ This functionality is exposed to rpm scriplets through a new
+ %sysusers_create_package macro. Old %sysusers_create and
+ %sysusers_create_inline macros are deprecated.
+
+ A transfiletrigger for sysusers.d configuration is now installed,
+ which means that it should be uncessary to call systemd-sysusers from
+ package installation scripts, unless the package installs any files
+ owned by those newly-created users, in which case
+ %sysusers_create_package should be used.
+
+ * Analogous change has been done for systemd-tmpfiles: it gained a mode
+ where the command-line configuration is merged with the configuration
+ on disk. This is exposed as the new %tmpfiles_create_package macro,
+ and %tmpfiles_create is deprecated. A transfiletrigger is installed
+ for tmpfiles.d, hence it should be unnecessary to call systemd-tmpfiles
+ from package installation scripts.
+
+ * sysusers.d configuration for a user may now also specify the group
+ number, in addition to the user number ("u username 123:456"), or
+ without the user number ("u username -:456").
+
+ * Configution items for systemd-sysusers can now be specified as
+ positional arguments when the new --inline switch is used.
+
+ * The login shell of users created through sysusers.d may now be
+ specified (previously, it was always /bin/sh for root and
+ /sbin/nologin for other users).
+
+ * systemd-analyze gained a new --global switch to look at global user
+ configuration. It also gained a unit-paths verb to list the unit load
+ paths that are compiled into systemd (which can be used with
+ --systemd, --user, or --global).
+
+ * udevadm trigger gained a new --settle/-w option to wait for any
+ triggered events to finish (but just those, and not any other events
+ which are triggered meanwhile).
+
+ * The action that systemd-logind takes when the lid is closed and the
+ machine is connected to external power can now be configured using
+ HandleLidSwitchExternalPower= in logind.conf. Previously, this action
+ was determined by HandleLidSwitch=, and, for backwards compatibility,
+ is still is, if HandleLidSwitchExternalPower= is not explicitly set.
+
+ * journalctl will periodically call sd_journal_process() to make it
+ resilient against inotify queue overruns when journal files are
+ rotated very quickly.
+
+ * Two new functions in libsystemd — sd_bus_get_n_queued_read and
+ sd_bus_get_n_queued_write — may be used to check the number of
+ pending bus messages.
+
+ * systemd gained a new
+ org.freedesktop.systemd1.Manager.AttachProcessesToUnit dbus call
+ which can be used to migrate foreign processes to scope and service
+ units. The primary user for this new API is systemd itself: the
+ systemd --user instance uses this call of the systemd --system
+ instance to migrate processes if it itself gets the request to
+ migrate processes and the kernel refuses this due to access
+ restrictions. Thanks to this "systemd-run --scope --user …" works
+ again in pure cgroups v2 environments when invoked from the user
+ session scope.
+
+ * A new TemporaryFileSystem= setting can be used to mask out part of
+ the real file system tree with tmpfs mounts. This may be combined
+ with BindPaths= and BindReadOnlyPaths= to hide files or directories
+ not relevant to the unit, while still allowing some paths lower in
+ the tree to be accessed.
+
+ ProtectHome=tmpfs may now be used to hide user home and runtime
+ directories from units, in a way that is mostly equivalent to
+ "TemporaryFileSystem=/home /run/user /root".
+
+ * Non-service units are now started with KeyringMode=shared by default.
+ This means that mount and swapon and other mount tools have access
+ to keys in the main keyring.
+
+ * /sys/fs/bpf is now mounted automatically.
+
+ * QNX virtualization is now detected by systemd-detect-virt and may
+ be used in ConditionVirtualization=.
+
+ * IPAccounting= may now be enabled also for slice units.
+
+ * A new -Dsplit-bin= build configuration switch may be used to specify
+ whether bin and sbin directories are merged, or if they should be
+ included separately in $PATH and various listings of executable
+ directories. The build configuration scripts will try to autodetect
+ the proper values of -Dsplit-usr= and -Dsplit-bin= based on build
+ system, but distributions are encouraged to configure this
+ explicitly.
+
+ * A new -Dok-color= build configuration switch may be used to change
+ the colour of "OK" status messages.
+
+ * UPGRADE ISSUE: serialization of units using JoinsNamespaceOf= with
+ PrivateNetwork=yes was buggy in previous versions of systemd. This
+ means that after the upgrade and daemon-reexec, any such units must
+ be restarted.
+
+ * INCOMPATIBILITY: as announced in the NEWS for 237, systemd-tmpfiles
+ will not exclude read-only files owned by root from cleanup.
CHANGES WITH 237:
store again, ahead of POLLHUP or POLLERR when they are removed
anyway.
- * A new document UIDS-GIDS.md has been added to the source tree, that
- documents the UID/GID range and assignment assumptions and
+ * A new document doc/UIDS-GIDS.md has been added to the source tree,
+ that documents the UID/GID range and assignment assumptions and
requirements of systemd.
* The watchdog device PID 1 will ping may now be configured through the
* Documentation has been added that lists all of systemd's low-level
environment variables:
- https://github.com/systemd/systemd/blob/master/ENVIRONMENT.md
+ https://github.com/systemd/systemd/blob/master/doc/ENVIRONMENT.md
* sd-daemon gained a new API sd_is_socket_sockaddr() for determining
whether a specific socket file descriptor matches a specified socket
booted up with "systemd-nspawn -b -i", qemu-kvm or on any physical
UEFI PC. This functionality is particularly useful to easily test
local changes made to systemd in a pristine, defined environment. See
- HACKING for details.
+ doc/HACKING for details.
* configure learned the --with-support-url= option to specify the
distribution's bugtracker.
projects / thirdparty / systemd.git / blobdiff