<listitem>
<para>A whitespace-separated list of shell-style globs
matching the persistent path, as exposed by the udev
- property <literal>ID_PATH</literal>.</para>
+ property <literal>ID_PATH</literal>. If the list is
+ prefixed with a "!", the test is inverted; i.e. it is
+ true when <literal>ID_PATH</literal> does not match any
+ item in the list.</para>
</listitem>
</varlistentry>
<varlistentry>
exposed by the udev property <literal>DRIVER</literal>
of its parent device, or if that is not set the driver
as exposed by <literal>ethtool -i</literal> of the
- device itself.</para>
+ device itself. If the list is prefixed with a "!", the
+ test is inverted.</para>
</listitem>
</varlistentry>
<varlistentry>
<listitem>
<para>A whitespace-separated list of shell-style globs
matching the device type, as exposed by the udev property
- <literal>DEVTYPE</literal>.</para>
+ <literal>DEVTYPE</literal>. If the list is prefixed with
+ a "!", the test is inverted.</para>
</listitem>
</varlistentry>
<varlistentry>
<listitem>
<para>A whitespace-separated list of shell-style globs
matching the device name, as exposed by the udev property
- <literal>INTERFACE</literal>.</para>
+ <literal>INTERFACE</literal>. If the list is prefixed
+ with a "!", the test is inverted.</para>
</listitem>
</varlistentry>
<varlistentry>
</para></listitem>
</varlistentry>
<varlistentry>
- <term><varname>ProxyARP=</varname></term>
- <listitem><para>A boolean. Configures proxy ARP. Proxy ARP is the technique in which one host,
+ <term><varname>IPv4ProxyARP=</varname></term>
+ <listitem><para>A boolean. Configures proxy ARP for IPv4. Proxy ARP is the technique in which one host,
usually a router, answers ARP requests intended for another machine. By "faking" its identity,
the router accepts responsibility for routing packets to the "real" destination. (see <ulink
url="https://tools.ietf.org/html/rfc1027">RFC 1027</ulink>.
Defaults to unset.
</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><varname>IPv6ProxyNDPAddress=</varname></term>
+ <listitem><para>An IPv6 address, for which Neighbour Advertisement
+ messages will be proxied.
+ Proxy NDP (Neighbor Discovery Protocol) is a technique for IPv6 to
+ allow routing of addresses to a different destination when peers expect them
+ to be present on a certain physical link.
+ In this case a router answers Neighbour Advertisement messages intended for
+ another machine by offering its own MAC address as destination.
+ Unlike proxy ARP for IPv4, is not enabled globally, but will only send Neighbour
+ Advertisement messages for addresses in the IPv6 neighbor proxy table,
+ which can also be shown by <command>ip -6 neighbour show proxy</command>
+ This option may be specified more than once. systemd-networkd will control the
+ per-interface `proxy_ndp` switch for each configured interface, depending on whether
+ there are <option>IPv6ProxyNDPAddress=</option> entries configured and add these to
+ the kernels IPv6 neighbor proxy table.
+ Defaults to unset.
+ </para></listitem>
+ </varlistentry>
<varlistentry>
<term><varname>Bridge=</varname></term>
<listitem>
</variablelist>
</refsect1>
+ <refsect1>
+ <title>[IPv6AddressLabel] Section Options</title>
+
+ <para>An <literal>[IPv6AddressLabel]</literal> section accepts the
+ following keys. Specify several <literal>[IPv6AddressLabel]</literal>
+ sections to configure several addresse labels. IPv6 address labels are
+ used for address selection. See <ulink url="https://tools.ietf.org/html/rfc3484">RFC 3484</ulink>.
+ Precedence is managed by userspace, and only the label itself is stored in the kernel</para>
+
+ <variablelist class='network-directives'>
+ <varlistentry>
+ <term><varname>Label=</varname></term>
+ <listitem>
+ <para> The label for the prefix (an unsigned integer) ranges 0 to 4294967294.
+ 0xffffffff is reserved. This key is mandatory.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><varname>Prefix=</varname></term>
+ <listitem>
+ <para>IPv6 prefix is an address with a prefix length, separated by a slash <literal>/</literal> character.
+ This key is mandatory. </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
<refsect1>
<title>[Route] Section Options</title>
<para>The <literal>[Route]</literal> section accepts the
<para>As in the <literal>[Network]</literal> section.</para>
</listitem>
</varlistentry>
+ <varlistentry>
+ <term><varname>GatewayOnlink=</varname></term>
+ <listitem>
+ <para>The <literal>GatewayOnlink</literal> option tells the kernel that it does not have
+ to check if the gateway is reachable directly by the current machine (i.e., the kernel does
+ not need to check if the gateway is attached to the local network), so that we can insert the
+ route in the kernel table without it being complained about. A boolean, defaults to <literal>no</literal>.
+ </para>
+ </listitem>
+ </varlistentry>
<varlistentry>
<term><varname>Destination=</varname></term>
<listitem>
<para>The metric of the route (an unsigned integer).</para>
</listitem>
</varlistentry>
+ <varlistentry>
+ <term><varname>IPv6Preference=</varname></term>
+ <listitem>
+ <para>Specifies the route preference as defined in <ulink
+ url="https://tools.ietf.org/html/rfc4191">RFC4191</ulink> for Router Discovery messages.
+ Which can be one of <literal>low</literal> the route has a lowest priority,
+ <literal>medium</literal> the route has a default priority or
+ <literal>high</literal> the route has a highest priority.</para>
+ </listitem>
+ </varlistentry>
<varlistentry>
<term><varname>Scope=</varname></term>
<listitem>
<para>Sets the "cost" of sending packets of this interface.
Each port in a bridge may have a different speed and the cost
is used to decide which link to use. Faster interfaces
- should have lower costs.</para>
+ should have lower costs. It is an interger value between 1 and
+ 65535.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><varname>Priority=</varname></term>
+ <listitem>
+ <para>Sets the "priority" of sending packets on this interface.
+ Each port in a bridge may have a different priority which is used
+ to decide which link to use. Lower value means higher priority.
+ It is an interger value between 0 to 63. Networkd does not set any
+ default, meaning the kernel default value of 32 is used.</para>
</listitem>
</varlistentry>
</variablelist>
Kind=bond
</programlisting>
- <programlisting># /etc/systemd/network/30-bond1-dev1.nework
+ <programlisting># /etc/systemd/network/30-bond1-dev1.network
[Match]
MACAddress=52:54:00:e9:64:41
Bond=bond1
</programlisting>
- <programlisting># /etc/systemd/network/30-bond1-dev2.nework
+ <programlisting># /etc/systemd/network/30-bond1-dev2.network
[Match]
MACAddress=52:54:00:e9:64:42
</programlisting>
</example>
+ <example>
+ <title>MacVTap</title>
+ <para>This brings up a network interface <literal>macvtap-test</literal>
+ and attaches it to <literal>enp0s25</literal>.</para>
+ <programlisting># /usr/lib/systemd/network/25-macvtap.network
+[Match]
+Name=enp0s25
+
+[Network]
+MACVTAP=macvtap-test
+</programlisting>
+ </example>
</refsect1>
<refsect1>
projects / thirdparty / systemd.git / blobdiff