-<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*-->
-<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+<?xml version='1.0'?>
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
-
-<!--
- SPDX-License-Identifier: LGPL-2.1+
--->
+<!-- SPDX-License-Identifier: LGPL-2.1+ -->
<refentry id="systemd.socket">
<refentryinfo>
<title>systemd.socket</title>
<productname>systemd</productname>
-
- <authorgroup>
- <author>
- <contrib>Developer</contrib>
- <firstname>Lennart</firstname>
- <surname>Poettering</surname>
- <email>lennart@poettering.net</email>
- </author>
- </authorgroup>
</refentryinfo>
<refmeta>
this unit type. See
<citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for the common options of all unit configuration files. The common
- configuration items are configured in the generic [Unit] and
- [Install] sections. The socket specific configuration options are
- configured in the [Socket] section.</para>
+ configuration items are configured in the generic <literal>[Unit]</literal> and
+ <literal>[Install]</literal> sections. The socket specific configuration options are
+ configured in the <literal>[Socket]</literal> section.</para>
<para>Additional options are listed in
<citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
which configure resource control settings for the processes of the
socket.</para>
- <para>For each socket file, a matching service file must exist,
+ <para>For each socket unit, a matching service unit must exist,
describing the service to start on incoming traffic on the socket
(see
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
- for more information about .service files). The name of the
+ for more information about .service units). The name of the
.service unit is by default the same as the name of the .socket
unit, but can be altered with the <option>Service=</option> option
described below. Depending on the setting of the
or it must be a template unit named the same way. Example: a
socket file <filename>foo.socket</filename> needs a matching
service <filename>foo.service</filename> if
- <option>Accept=false</option> is set. If
- <option>Accept=true</option> is set, a service template file
+ <option>Accept=no</option> is set. If
+ <option>Accept=yes</option> is set, a service template
<filename>foo@.service</filename> must exist from which services
are instantiated for each incoming connection.</para>
socket passing (i.e. sockets passed in via standard input and
output, using <varname>StandardInput=socket</varname> in the
service file).</para>
+
+ <para>All network sockets allocated through <filename>.socket</filename> units are allocated in the host's network
+ namespace (see <citerefentry
+ project='man-pages'><refentrytitle>network_namespaces</refentrytitle><manvolnum>7</manvolnum></citerefentry>). This
+ does not mean however that the service activated by a configured socket unit has to be part of the host's network
+ namespace as well. It is supported and even good practice to run services in their own network namespace (for
+ example through <varname>PrivateNetwork=</varname>, see
+ <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>), receiving only
+ the sockets configured through socket-activation from the host's namespace. In such a set-up communication within
+ the host's network namespace is only permitted through the activation sockets passed in while all sockets allocated
+ from the service code itself will be associated with the service's own namespace, and thus possibly subject to a a
+ much more restrictive configuration.</para>
</refsect1>
<refsect1>
<varlistentry>
<term><varname>SocketProtocol=</varname></term>
- <listitem><para>Takes a one of <option>udplite</option>
+ <listitem><para>Takes one of <option>udplite</option>
or <option>sctp</option>. Specifies a socket protocol
(<constant>IPPROTO_UDPLITE</constant>) UDP-Lite
(<constant>IPPROTO_SCTP</constant>) SCTP socket respectively. </para>
<varlistentry>
<term><varname>BindIPv6Only=</varname></term>
- <listitem><para>Takes a one of <option>default</option>,
+ <listitem><para>Takes one of <option>default</option>,
<option>both</option> or <option>ipv6-only</option>. Controls
the IPV6_V6ONLY socket option (see
<citerefentry project='die-net'><refentrytitle>ipv6</refentrytitle><manvolnum>7</manvolnum></citerefentry>
incoming traffic. Defaults to <option>false</option>. For
performance reasons, it is recommended to write new daemons
only in a way that is suitable for
- <option>Accept=false</option>. A daemon listening on an
+ <option>Accept=no</option>. A daemon listening on an
<constant>AF_UNIX</constant> socket may, but does not need to,
call
<citerefentry><refentrytitle>close</refentrytitle><manvolnum>2</manvolnum></citerefentry>
on the received socket before exiting. However, it must not
unlink the socket from a file system. It should not invoke
<citerefentry><refentrytitle>shutdown</refentrytitle><manvolnum>2</manvolnum></citerefentry>
- on sockets it got with <varname>Accept=false</varname>, but it
+ on sockets it got with <varname>Accept=no</varname>, but it
may do so for sockets it got with
- <varname>Accept=true</varname> set. Setting
- <varname>Accept=true</varname> is mostly useful to allow
+ <varname>Accept=yes</varname> set. Setting
+ <varname>Accept=yes</varname> is mostly useful to allow
daemons designed for usage with
<citerefentry project='freebsd'><refentrytitle>inetd</refentrytitle><manvolnum>8</manvolnum></citerefentry>
to work unmodified with systemd socket
<term><varname>MaxConnections=</varname></term>
<listitem><para>The maximum number of connections to
simultaneously run services instances for, when
- <option>Accept=true</option> is set. If more concurrent
+ <option>Accept=yes</option> is set. If more concurrent
connections are coming in, they will be refused until at least
one existing connection is terminated. This setting has no
effect on sockets configured with
- <option>Accept=false</option> or datagram sockets. Defaults to
+ <option>Accept=no</option> or datagram sockets. Defaults to
64.</para></listitem>
</varlistentry>
<para>
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>,