/* SPDX-License-Identifier: LGPL-2.1+ */
-/***
- Copyright © 2013 Marc-Antoine Perennou
-***/
#include <errno.h>
#include <fcntl.h>
}
static int on_properties_changed(sd_bus_message *m, void *userdata, sd_bus_error *error) {
+ const char *path, *interface, *active_state = NULL, *job_path = NULL;
WaitContext *c = userdata;
- const char *path;
+ bool is_failed;
int r;
+ /* Called whenever we get a PropertiesChanged signal. Checks if ActiveState changed to inactive/failed.
+ *
+ * Signal parameters: (s interface, a{sv} changed_properties, as invalidated_properties) */
+
path = sd_bus_message_get_path(m);
if (!set_contains(c->unit_paths, path))
return 0;
- /* Check if ActiveState changed to inactive/failed */
- /* (s interface, a{sv} changed_properties, as invalidated_properties) */
- r = sd_bus_message_skip(m, "s");
+ r = sd_bus_message_read(m, "s", &interface);
if (r < 0)
return bus_log_parse_error(r);
+ if (!streq(interface, "org.freedesktop.systemd1.Unit")) /* ActiveState is on the Unit interface */
+ return 0;
+
r = sd_bus_message_enter_container(m, SD_BUS_TYPE_ARRAY, "{sv}");
if (r < 0)
return bus_log_parse_error(r);
- while ((r = sd_bus_message_enter_container(m, SD_BUS_TYPE_DICT_ENTRY, "sv")) > 0) {
+ for (;;) {
const char *s;
- r = sd_bus_message_read(m, "s", &s);
+ r = sd_bus_message_enter_container(m, SD_BUS_TYPE_DICT_ENTRY, "sv");
if (r < 0)
return bus_log_parse_error(r);
+ if (r == 0) /* end of array */
+ break;
- if (streq(s, "ActiveState")) {
- bool is_failed;
+ r = sd_bus_message_read(m, "s", &s); /* Property name */
+ if (r < 0)
+ return bus_log_parse_error(r);
- r = sd_bus_message_enter_container(m, SD_BUS_TYPE_VARIANT, "s");
+ if (streq(s, "ActiveState")) {
+ r = sd_bus_message_read(m, "v", "s", &active_state);
if (r < 0)
return bus_log_parse_error(r);
- r = sd_bus_message_read(m, "s", &s);
+ if (job_path) /* Found everything we need */
+ break;
+
+ } else if (streq(s, "Job")) {
+ uint32_t job_id;
+
+ r = sd_bus_message_read(m, "v", "(uo)", &job_id, &job_path);
if (r < 0)
return bus_log_parse_error(r);
- is_failed = streq(s, "failed");
- if (streq(s, "inactive") || is_failed) {
- log_debug("%s became %s, dropping from --wait tracking", path, s);
- free(set_remove(c->unit_paths, path));
- c->any_failed = c->any_failed || is_failed;
- } else
- log_debug("ActiveState on %s changed to %s", path, s);
+ /* There's still a job pending for this unit, let's ignore this for now, and return right-away. */
+ if (job_id != 0)
+ return 0;
+
+ if (active_state) /* Found everything we need */
+ break;
- break; /* no need to dissect the rest of the message */
} else {
- /* other property */
- r = sd_bus_message_skip(m, "v");
+ r = sd_bus_message_skip(m, "v"); /* Other property */
if (r < 0)
return bus_log_parse_error(r);
}
+
r = sd_bus_message_exit_container(m);
if (r < 0)
return bus_log_parse_error(r);
}
- if (r < 0)
- return bus_log_parse_error(r);
+
+ /* If this didn't contain the ActiveState property we can't do anything */
+ if (!active_state)
+ return 0;
+
+ is_failed = streq(active_state, "failed");
+ if (streq(active_state, "inactive") || is_failed) {
+ log_debug("%s became %s, dropping from --wait tracking", path, active_state);
+ free(set_remove(c->unit_paths, path));
+ c->any_failed = c->any_failed || is_failed;
+ } else
+ log_debug("ActiveState on %s changed to %s", path, active_state);
if (set_isempty(c->unit_paths))
sd_event_exit(c->event, EXIT_SUCCESS);
_cleanup_(bus_wait_for_jobs_freep) BusWaitForJobs *w = NULL;
_cleanup_(wait_context_free) WaitContext wait_context = {};
const char *method, *mode, *one_name, *suffix = NULL;
+ _cleanup_free_ char **stopped_units = NULL; /* Do not use _cleanup_strv_free_ */
_cleanup_strv_free_ char **names = NULL;
int r, ret = EXIT_SUCCESS;
sd_bus *bus;
r = start_unit_one(bus, method, *name, mode, &error, w, arg_wait ? &wait_context : NULL);
if (ret == EXIT_SUCCESS && r < 0)
ret = translate_bus_error_to_exit_status(r, &error);
+
+ if (r >= 0 && streq(method, "StopUnit")) {
+ r = strv_push(&stopped_units, *name);
+ if (r < 0)
+ return log_oom();
+ }
}
if (!arg_no_block) {
/* When stopping units, warn if they can still be triggered by
* another active unit (socket, path, timer) */
- if (!arg_quiet && streq(method, "StopUnit"))
- STRV_FOREACH(name, names)
+ if (!arg_quiet)
+ STRV_FOREACH(name, stopped_units)
(void) check_triggering_units(bus, *name);
}
if (arg_dry_run)
return 0;
- r = safe_fork("(kexec)", FORK_RESET_SIGNALS|FORK_DEATHSIG|FORK_LOG, &pid);
+ r = safe_fork("(kexec)", FORK_RESET_SIGNALS|FORK_DEATHSIG|FORK_RLIMIT_NOFILE_SAFE|FORK_LOG, &pid);
if (r < 0)
return r;
if (r == 0) {
if (!arg_quiet)
log_info("Executing: %s", l);
- j = safe_fork("(sysv-install)", FORK_RESET_SIGNALS|FORK_DEATHSIG|FORK_LOG, &pid);
+ j = safe_fork("(sysv-install)", FORK_RESET_SIGNALS|FORK_DEATHSIG|FORK_RLIMIT_NOFILE_SAFE|FORK_LOG, &pid);
if (j < 0)
return j;
if (j == 0) {
if (carries_install_info == 0 && !ignore_carries_install_info)
log_notice("The unit files have no installation config (WantedBy=, RequiredBy=, Also=,\n"
"Alias= settings in the [Install] section, and DefaultInstance= for template\n"
- "units). This means they are not meant to be enabled using systemctl.\n \n"
+ "units). This means they are not meant to be enabled using systemctl.\n"
+ " \n" /* trick: the space is needed so that the line does not get stripped from output */
"Possible reasons for having this kind of units are:\n"
"%1$s A unit may be statically enabled by being symlinked from another unit's\n"
" .wants/ or .requires/ directory.\n"
assert(paths);
- r = safe_fork("(editor)", FORK_RESET_SIGNALS|FORK_DEATHSIG|FORK_LOG|FORK_WAIT, NULL);
+ r = safe_fork("(editor)", FORK_RESET_SIGNALS|FORK_DEATHSIG|FORK_RLIMIT_NOFILE_SAFE|FORK_LOG|FORK_WAIT, NULL);
if (r < 0)
return r;
if (r == 0) {
/* we default to allowing interactive authorization only in systemctl (not in the legacy commands) */
arg_ask_password = true;
- while ((c = getopt_long(argc, argv, "ht:p:alqfs:H:M:n:o:ir", options, NULL)) >= 0)
+ while ((c = getopt_long(argc, argv, "ht:p:alqfs:H:M:n:o:ir.::", options, NULL)) >= 0)
switch (c) {
return log_oom();
break;
+ case '.':
+ /* Output an error mimicking getopt, and print a hint afterwards */
+ log_error("%s: invalid option -- '.'", program_invocation_name);
+ log_notice("Hint: to specify units starting with a dash, use \"--\":\n"
+ " %s [OPTIONS...] {COMMAND} -- -.%s ...",
+ program_invocation_name, optarg ?: "mount");
+ _fallthrough_;
+
case '?':
return -EINVAL;
return log_error_errno(SYNTHETIC_ERRNO(EINVAL),
"--wait may not be combined with --no-block.");
- if (arg_runtime && STRPTR_IN_SET(argv[optind], "disable", "unmask", "preset", "preset-all"))
- return log_error_errno(SYNTHETIC_ERRNO(EINVAL),
- "--runtime cannot be used with %s",
- argv[optind]);
-
return 1;
}
/* Hmm, so some other init system is running, we need to forward this request to
* it. For now we simply guess that it is Upstart. */
+ (void) rlimit_nofile_safe();
execv(TELINIT, argv);
return log_error_errno(SYNTHETIC_ERRNO(EIO),
#endif
}
-static int run(int argc, char*argv[]) {
+static int run(int argc, char *argv[]) {
int r;
argv_cmdline = argv[0];