This provides basic OpenSSL support without optimizations like TCP Fast Open and TLS Session Tickets.
Notice only a single SSL library can be enabled at a time and therefore journald functions provided by GnuTLS will be disabled when using OpenSSL.
Fixes #9531
resolved: set io events after receiving EAGAIN for TLS
During handshake and TLS session closing, messages needs to be exchanged. Therefore this patch overrides the requested IO events for the TCP stream when the TLS is waiting for sending or receiving of messages during theses periods. This fixes issues with correctly closing the TLS stream and prevents the handshake from hanging in rare cases (not seen yet).
Michael Biebl [Wed, 25 Jul 2018 11:58:00 +0000 (13:58 +0200)]
test: Increase qemu timeout from 90s to 180s
The usage of an initrd made TEST-09-ISSUE-2691 more likely to fail with
a timeout, so increase the timeout by 90s and adjust TimeoutStopSec=
accordingly.
sleep: offer hibernation only if the kernel image still exists
This makes hibernation unavailable if the kernel image we are currently
running was removed. This is supposed to be superficial protection
against hibernating a system we can never return from because the kernel
has been updated and the kernel we currently run is not available
anymore.
We look at a couple of places for the kernel, which should cover all
distributions I know off. Should I have missed a path I am sure people
will quickly notice and we can add more places to check. (or maybe
convince those distros to stick their kernels at a standard place)
Andrew Jorgensen [Wed, 25 Jul 2018 15:06:57 +0000 (08:06 -0700)]
shared/sleep-config: exclude zram devices from hibernation candidates
On a host with sufficiently large zram but with no actual swap, logind will
respond to CanHibernate() with yes. With this patch, it will correctly respond
no, unless there are other swap devices to consider.
core: fix gid when DynamicUser=yes with static User=
When DynamicUser=yes and static User= are set, and the user has
different uid and gid, then as the storage socket for the dynamic
user does not contains gid, we need to obtain gid.
timedate: defer the property changed signal until job of starting/stopping NTP service is finished
Before this, the property changed signal is emitted immediately after
StartUnit/StopUnit method is called. So, the running state of the NTP
client service may not updated.
This makes the timing of emitting property changed signal is deferred
until job of starting/stopping NTP client service is completed.
timedate: increment reference count of sd_bus_message
The commit 5d280742b645a69a19e7f9131adc0c95f5c7fa07 introduces a
barrier to suppress calling context_update_ntp_status() multiple times.
However, it just stores the address of sd_bus_message object. So,
when an address is reused on the subsequent message, then the status
of NTP clients are not updated.
This makes the stored message object is referenced by the context
object. So, the subsequent message is on cirtainly different address.
And while we are at it, let's rearrange and extend the Type=
documentation a bit. Let's make it an itemized list, and let's add a
paragraph explaining which type best to use.
Users are often surprised that "systemd-run" command lines like
"systemd-run -p User=idontexist /bin/true" will return successfully,
even though the logs show that the process couldn't be invoked, as the
user "idontexist" doesn't exist. This is because Type=simple will only
wait until fork() succeeded before returning start-up success.
This patch adds a new service type Type=exec, which is very similar to
Type=simple, but waits until the child process completed the execve()
before returning success. It uses a pipe that has O_CLOEXEC set for this
logic, so that the kernel automatically sends POLLHUP on it when the
execve() succeeded but leaves the pipe open if not. This means PID 1
waits exactly until the execve() succeeded in the child, and not longer
and not shorter, which is the desired functionality.
Making use of this new functionality, the command line
"systemd-run -p User=idontexist -p Type=exec /bin/true" will now fail,
as expected.
core: swap order of "n_storage_fds" and "n_socket_fds" parameters
When process fd lists to pass to activated programs we always place the
socket activation fds first, and the storage fds last. Irritatingly in
almost all calls the "n_storage_fds" parameter (i.e. the number of
storage fds to pass) came first so far, and the "n_socket_fds" parameter
second. Let's clean this up, and specify the number of fds in the order
the fds themselves are passed.
(Also, let's fix one more case where "unsigned" was used to size an
array, while we should use "size_t" instead.)
sd-bus: allow connecting to the pseudo-container ".host"
machined exposes the pseudo-container ".host" as a reference to the host
system, and this means "machinectl login .host" and "machinectl shell
.host" get your a login/shell on the host. systemd-run currently doesn't
allow that. Let's fix that, and make sd-bus understand ".host" as an
alias for connecting to the host system.
tree-wide: increase granularity of percent specifications all over the place to permille
We so far had various placed we'd parse percentages with
parse_percent(). Let's make them use parse_permille() instead, which is
downward compatible (as it also parses percent values), and increases
the granularity a bit. Given that on the wire we usually normalize
relative specifications to something like UINT32_MAX anyway changing
from base-100 to base-1000 calculations can be done easily without
breaking compat.
This commit doesn't document this change in the man pages. While
allowing more precise specifcations permille is not as commonly
understood as perent I guess, hence let's keep this out of the docs for
now.
parse-util: in parse_permille() check negative earlier
If 'v' is negative, it's wrong to add the decimal to it, as we'd
actually need to subtract it in this case. But given that we don't want
to allow negative vaues anyway, simply check earlier whether what we
have parsed so far was negative, and react to that before adding the
decimal to it.
pam_systemd: always set XDG_SESSION_{CLASS|TYPE|DESKTOP}
We likely get the data from the env block, but we might also determine
it from elsewhere (such as PAM module parameters). Let's set the env
vars on the env block explicitly, so that they are available always, and
apps can rely on it.
pam_systemd: also make $XDG_SESSION_DESKTOP configurable via PAM module command line
Let's make this symmetric with XDG_SESSION_CLASS and XDG_SESSION_TYPE,
so that PAM stacks can configure this easily without involving env vars,
in case there are PAM session managers which only support a single
desktop anyway.
pam_systemd: drop setting DBUS_SESSION_BUS_ADDRESS
Since D-Bus 1.9.14 (2015-03-02) dbus looks in $XDG_RUNTIME_DIR/bus for
the system bus on its own, hence we can finally drop setting this
environment variable. gdbus since glib 2.45.3 (June 2015) also supports
it.
network: make log level lower when operations are automatically re-tried later
When networkd has not connected and setting hostname/timezone is
requested, the operation is delayed, not canceled. So, logging in
debug level is sufficient for the corresponding log message.
nss: do not modify errno when NSS_STATUS_NOTFOUND or NSS_STATUS_SUCCESS
This also adds PROTECT_ERRNO for all nss module functions.
C.f. glibc NSS documents https://www.gnu.org/software/libc/manual/html_node/NSS-Modules-Interface.html
and discussion in https://sourceware.org/bugzilla/show_bug.cgi?id=23410.
Add CC0 as the license. SPDX does not have a "public domain" tag, but CC0 is
more or less equivalent. We should have *some* header to avoid doubts in the
future.
After upgrading to emacs-26.1-1.fc28.x86_64 I noticed that our
.dir-locals.el files weren't honoured anymore (specifically the fill
column variable is not correctly set for c-mode files). I finally
tracked this down to the order in which items are listed in
.dir-locals.el: if the "nil" one is listed last everything works,
otherwise, it's the one that is applied instead of the c-mode one.
This patch simply swaps the entries, and puts the "nil" one last. My
emacs lisp fu is a bit too limited to understand the full impact for
this, and why emacs 26.1 changed behaviour in this regard, but from an
outsider's view the order shouldn't negatively affect things otherwise,
hence this patch.
Yu Watanabe [Thu, 10 May 2018 07:04:16 +0000 (16:04 +0900)]
meson: use integer type in options
This bumps the minimum required version of meson to 0.45 and
python to 3.5, as integer type option is supported since meson-0.45
and meson-0.45 requires python-3.5.
meson: allow building resolved and machined without nss modules
This adds -Dnss-resolve= and -Dnss-mymachines= meson options.
By using this option, e.g., resolved can be built without nss-resolve.
When no nss modules are built, then test-nss is neither built.
Also, This changes the option name -Dmyhostname= to -Dnss-myhostname=
for consistency to other nss related options.