Michael Biebl [Fri, 28 Nov 2014 05:04:48 +0000 (06:04 +0100)]
sysv-generator: initialize units before use to ensure correct ordering
The original loop called fix_order() on each service immediately after
loading it, but fix_order() would reference other units which were not
loaded yet.
This resulted in bogus and unnecessary orderings based on the static
start priorities.
Therefore call load_sysv() for every init script when traversing them in
enumerate_sysv(). This ensures that all units are loaded when
fix_order() is called.
Michael Biebl [Mon, 5 Jan 2015 08:49:44 +0000 (09:49 +0100)]
sysv-generator: handle Provides: for non-virtual facility names
The list of provided facility names as specified via Provides: in the
LSB header was originally implemented by adding those facilities to the
Names= property via unit_add_name().
In commit 95ed3294c632f5606327149f10cef1eb34422862 the internal SysV
support was replaced by a generator and support for parsing the Names=
option had been removed from the unit file parsing in v186.
As a result, Provides: for non-virtual facility was dropped when
introducing the sysv-generator.
Since quite a few SysV init scripts still use that functionality (at
least in distros like Debian which have a large body of SysV init
scripts), add back support by making those facility names available via
symlinks to the unit filename to ensure correct orderings between
SysV init scripts which use those facility names.
journald: whenever we rotate a file, btrfs defrag it
Our write pattern is quite awful for CoW file systems (btrfs...), as we
keep updating file parts in the beginning of the file. This results in
fragmented journal files. Hence: when rotating files, defragment them,
since at that point we know that no further write accesses will be made.
Chris Atkinson [Thu, 1 Jan 2015 21:35:34 +0000 (16:35 -0500)]
man: clarify path escaping and reference systemd-escape
This patch adds more detail to the description of how path escaping
operates and provides a pointer to the systemd-escape program. Either
would serve to answer the question raised in the bug report, so
hopefully this will allow it to be closed.
journald: allow restarting journald without losing stream connections
Making use of the fd storage capability of the previous commit, allow
restarting journald by serilizing stream state to /run, and pushing open
fds to PID 1.
core: add new logic for services to store file descriptors in PID 1
With this change it is possible to send file descriptors to PID 1, via
sd_pid_notify_with_fds() which PID 1 will store individually for each
service, and pass via the usual fd passing logic on next invocation.
This is useful for enable daemon reload schemes where daemons serialize
their state to /run, push their fds into PID 1 and terminate, restoring
their state on next start from the data in /run and passed in from PID
1.
The fds are kept by PID 1 as long as no POLLHUP or POLLERR is seen on
them, and the service they belong to are either not dead or failed, or
have a job queued.
When systemd starts a service, it first opened /run/systemd/journal/stdout
socket, and only later switched to the right user.group (if they are
specified). Later on, journald looked at the credentials, and saw
root.root, because credentials are stored at the time the socket is
opened. As a result, all messages passed over _TRANSPORT=stdout were
logged with _UID=0, _GID=0.
Drop real uid and gid temporarily to fix the issue.
machine: add reference to machine-dbus.h to Makefile.am
Commit 003dffde2c1b93 ("machined: Move image discovery logic into src/shared,
so that we can make use of it from nspawn") moved some definitions from
machine.h to a new machine-dbus.h, but did not include it in Makefile.am
Tested that `make distcheck` works after this fix.
fstab-generator: use more appropriate checks for swap and device availability
We always should use the same checks when deciding whether swap support
and mounting of devices is supported. Hence, let's make
fstab-generator's logic more similar to the usual logic we follow:
a) Look for /proc/swaps and no container support before activating
swaps.
b) Look for /sys being writable befire supporting device mounts.
journald: add some additional checks before we divide by values read from journal file headers
Since the file headers might be replaced by zeroed pages now due to
sigbus we should make sure we don't end up dividing by zero because we
don't check values read from journal file headers for changes.
journal: install sigbus handler for journal tools too
This makes them robust regarding truncation. Ideally, we'd export this
as an API, but given how messy SIGBUS handling is, and the uncertain
ownership logic of signal handlers we should not do this (unless libc
one day invents a scheme how to sanely install SIGBUS handlers for
specific memory areas only). However, for now we can still make all our
own tools robust.
Note that external tools will only have read-access to the journal
anyway, where SIGBUS is much more unlikely, given that only writes are
subject to disk full problems.
journald: process SIGBUS for the memory maps we set up
Even though we use fallocate() it appears that file systems like btrfs
will trigger SIGBUS on certain low-disk-space situation. We should
handle that, hence catch the signal, add it to a list of invalidated
pages, and replace the page with an empty memory area. After each write
check if SIGBUS was triggered, and consider the write invalid if it was.
This should make journald a lot more robust with file systems where
fallocate() is not reliable, for example all CoW file systems
(btrfs...), where changing written data can fail with disk full errors.
Peter Hutterer [Sun, 4 Jan 2015 21:26:18 +0000 (07:26 +1000)]
hwdb: revert Logitech Optical USB Mouse
Reporter says he incorrectly measured the data but the device is not available
anymore to correct it. We'll have to wait for someone else to submit the data.
-n is only allowed for root. /etc/mtab is nowadays almost always a link to /proc/,
so in practice this does not really matter too much, but should allow .mount units
to work in --user mode.
Chris Atkinson [Thu, 1 Jan 2015 02:59:16 +0000 (21:59 -0500)]
man: Clarify effect when both calendar day and date are listed in timer
See bug 87859 (https://bugs.freedesktop.org/show_bug.cgi?id=87859). Bug
reporter found the language describing the effect of specifying both a
day and date unclear; hopefully the attached patch will clarify and
allow the bug to be closed.
David Herrmann [Wed, 31 Dec 2014 15:28:48 +0000 (16:28 +0100)]
lldp: fix sd_lldp_save()
Fix a bunch of needless memzero() calls, a bunch of use-after-free
regarding _cleanup_free_ and drop unused variables.
Hint: Do NOT use _cleanup_free_ for temporary strappend() helpers that are
freed multiple times. All you safe is the last free() call, which is
really not worth the trouble resetting it to NULL all the time.
The commit in question changed a binary file. I didn't look at the diff in
particular, so I have no idea what exactly was changed. However, the file
is generated and it looked highly suspiciuous. Therefore, I reverted that
part.
Note that this is generated by "make update-unifont" so really no reason
to touch at all.
If some sleep operation was not possible (e.g. because swap is missing),
we would try twice: once through logind, which would result in a clean error:
Failed to execute operation: Sleep verb not supported
and then second time by starting the appropriate unit directly, which is
more messy. If logind tells us that something is not possible (or already
in progress), report that to the user and quit. If logind is present and working
we should not try to work around it.
Loosely based on https://bugs.freedesktop.org/show_bug.cgi?id=87832.
bus: replace ENOSYS return codes with EBADR/ENOTSUP
ENOSYS is used to signify compiled-out functionality. Using it for
different kinds of error is misleading.
For BUS_ERROR_SLEEP_VERB_NOT_SUPPORTED, logind-action.c uses ENOTSUP
already, so changing it to ENOTSUP makes the dbus and action paths
behave the same.