This variable is not set by meson, so let's not try to use it.
We could use some more elaborate scheme (e.g. based on $MESON_BUILD_ROOT and
$MESON_SUBDIR) to find the path to systemd-sysv-generator, but it seems
that plain ./systemd-sysv-generator works just as well and has the advantage
that it's easy to invoke the test by hand (as long as one cd's to the
meson build dir).
fileio: try to read one byte too much in read_full_stream()
Let's read one byte more than the file size we read from stat() on the
first fread() invocation. That way, the first read() will already be
short and indicate eof to fread().
As it turns out LINE_MAX at 4096 is too short for many usecases. Since
the general concept of having a common maximum line length limit makes
sense let's add our own, and make it larger (1MB for now).
fileio: add new helper call read_line() as bounded getline() replacement
read_line() is much like getline(), and returns a line read from a
FILE*, of arbitrary sizes. In contrast to gets() it will grow the buffer
dynamically, and in contrast to getline() it will place a user-specified
boundary on the line.
socket: assign socket units to a default slice unconditionally
Due to the chown() logic socket units might end up with processes even
if no explicit command is defined for them, hence let's make sure these
processes are in the right cgroup, and that means within a slice.
Mount, swap and service units unconditionally are assigned to a slice
already, let's do the same here, too.
(This becomes more important as soon as the ebpf/firewall stuff is
merged, as there'll be another reason to fork off processes then)
cgroup: rework which files we chown() on delegation
On cgroupsv2 we should also chown()/chmod() the subtree_control file,
so that children can use controllers the way they like.
On cgroupsv1 we should also chown()/chmod() cgroups.clone_children, as
not setting this for new cgroups makes little sense, and hence delegated
clients should be able to write to it.
Note that error handling for both cases is different. subtree_control
matters so we check for errors, but the clone_children/tasks stuff
doesn't really, as it's legacy stuff. Hence we only log errors and
proceed.
cgroup-util: downgrade log messages from library code to LOG_DEBUG
These errors don't really matter, that's why we log and proceed in the
current code. However, we currently log at LOG_WARNING, but we really
shouldn't given that this is library code. Hence downgrade this to
LOG_DEBUG.
install: consider globally enabled units as "enabled" for the user
We would not consider symlinks in /etc/systemd/user/*.{wants,requires}/
towards the user unit being "enabled", because the symlinks were not
located in "config" paths. But this is confusing to users, since those units
are clearly enabled and will be started. So let's muddle the definition of
enablement a bit to include the paths only accessible to root when looking for
enabled user units.
install: consider non-Alias=/non-DefaultInstance= symlinks as "indirect" enablement
I think this matches the spirit of "indirect" well: the unit
*might* be active, even though it is not "installed" in the
sense of symlinks created based on the [Install] section.
The changes to test-install-root touch the same lines as in the previous
commit; the change in each case is from
assert_se(unit_file_get_state(...) >= 0 && state == UNIT_FILE_ENABLED)
to
assert_se(unit_file_get_state(...) >= 0 && state == UNIT_FILE_DISABLED)
to
assert_se(unit_file_get_state(...) >= 0 && state == UNIT_FILE_INDIRECT)
in the last two commits.
install: only consider names in Alias= as "enabling"
When a unit has a symlink that makes an alias in the filesystem,
but that name is not specified in [Install], it is confusing
is the unit is shown as "enabled". Look only for names specified
in Alias=.
Fixes #6338.
v2:
- Fix indentation.
- Fix checking for normal enablement, when the symlink name is the same as the
unit name. This case wasn't handled properly in v1.
v3:
- Rework the patch to also handle templates properly:
A template templ@.service with DefaultInstance=foo will be considered
enabled only when templ@foo.service symlink is found. Symlinks with
other instance names do not count, which matches the logic for aliases
to normal units. Tests are updated.
time-util: correctly handle the timezone when parsing
The timezone was cut off the string once the timezone was not UTC.
If it is not UTC but a other timezone that matches tzname[0] or
tzname[1], then we can leave it to the impl function to parse that
correctly. If not we can just fallback to whatever is the current
timezone is in the given t_timezone.
journald: make maximum size of stream log lines configurable and bump it to 48K (#6838)
This adds a new setting LineMax= to journald.conf, and sets it by
default to 48K. When we convert stream-based stdout/stderr logging into
record-based log entries, read up to the specified amount of bytes
before forcing a line-break.
This also makes three related changes:
- When a NUL byte is read we'll not recognize this as alternative line
break, instead of silently dropping everything after it. (see #4863)
- The reason for a line-break is now encoded in the log record, if it
wasn't a plain newline. Specifically, we distuingish "nul",
"line-max" and "eof", for line breaks due to NUL byte, due to the
maximum line length as configured with LineMax= or due to end of
stream. This data is stored in the new implicit _LINE_BREAK= field.
It's not synthesized for plain \n line breaks.
- A randomized 128bit ID is assigned to each log stream.
With these three changes in place it's (mostly) possible to reconstruct
the original byte streams from log data, as (most) of the context of
the conversion from the byte stream to log records is saved now. (So,
the only bits we still drop are empty lines. Which might be something to
look into in a future change, and which is outside of the scope of this
work)
Tommi Rantala [Tue, 19 Sep 2017 08:10:49 +0000 (11:10 +0300)]
journal: add object sanity check to journal_file_move_to_object()
Introduce journal_file_check_object(), which does lightweight object
sanity checks, and use it in journal_file_move_to_object(), so that we
will catch certain corrupted objects in the journal file.
This fixes #6447, where we had only partially written out OBJECT_ENTRY
(ObjectHeader written, but rest of object zero bytes), causing
"journalctl --list-boots" to fail.
$ builddir.vanilla/journalctl --list-boots -D bug6447/
Failed to determine boots: No data available
Note that journal_file_check_object() is similar to
journal_file_object_verify(). The most expensive checks are omitted, as
they would slow down every journal_file_move_to_object() call too much.
With this implementation, the added overhead is small, for example when
dumping some journal content to /dev/null
(built with -Dbuildtype=debugoptimized -Db_ndebug=true):
Michael Biebl [Tue, 19 Sep 2017 12:17:57 +0000 (14:17 +0200)]
tests: change dbus tests to use user bus (#6845)
This makes it possible to run more dbus tests in a build
environment/chroot where no system bus is available.
To run the dbus test one then can use dbus-run-session.
systemd-link: Add support to configure tx-tcp6-segmentation (#6859)
closes #6854
tcp-segmentation-offload: off
tx-tcp-segmentation: off
tx-tcp-ecn-segmentation: off [fixed]
tx-tcp-mangleid-segmentation: off
tx-tcp6-segmentation: off <==========================
Typically when DHCP server sets MTU it is a lower one. And a lower than usual
MTU is then thus required on said network to have operational networking. This
makes networkd's dhcp client to work in more similar way to other dhcp-clients
(e.g. isc-dhcp). In particular, in a cloud setting, without this default
instances have resulted in timing out talking to cloud metadata source and
failing to provision.
This does not change this default for the Annonymize code path.
man: import "Multi-Seat on Linux" into sd-login(3)
The document on the wiki is partially outdated and not very visible. Let's
import the gist of it here. The original text is retained, with only grammar
and stylistic and formatting changes.
Alan Jenkins [Sat, 16 Sep 2017 11:32:59 +0000 (12:32 +0100)]
sd-bus: style nitpick node_vtable_get_userdata()
It's confusing to use a single void* to store data with two different
types, i.e. a userdata value which is safe to pass to ->find(), and a
userdata value which identifies the found object.
Name the latter `found_u`. This naming treats (!c->find) as a degenerate
case. (I.e. at that point, we know the object has already been found :).
Ivan Kurnosov [Sun, 17 Sep 2017 11:09:38 +0000 (23:09 +1200)]
Fix for dst/non-dst timezones
The problem was with the tm.tm_isdst that is set to the current environment
value: either DST or not. While the current state is not relevant to the state
in the desired date.
Hence — it should be reset so that the mktime_or_timegm could normalise it
later.
Christian Hesse [Fri, 15 Sep 2017 19:28:24 +0000 (21:28 +0200)]
fix path in btrfs rule (#6844)
Commit 0e8856d2 (assemble multidevice btrfs volumes without external
tools (#6607)) introduced a call to udevadm. That lives in @rootbindir@,
not @rootlibexecdir@. So fix the path.
We settled on "filename" and "file system", so change a couple of places for
consistency. The exception is when there's an adjective before "file" that
binds more strongly then "name": "password file name", "output file name", etc.
Those cases are left intact.
cryptsetup: make sure we invoke the cryptsetup tools with a shared keyring
We want that cryptsetup can cache keys between multiple invocations, and
it does so via the root user's user keyring, hence let's share it among
services.
core: add new per-unit setting KeyringMode= for controlling kernel keyring setup
Usually, it's a good thing that we isolate the kernel session keyring
for the various services and disconnect them from the user keyring.
However, in case of the cryptsetup key caching we actually want that
multiple instances of the cryptsetup service can share the keys in the
root user's user keyring, hence we need to be able to disable this logic
for them.
This adds KeyringMode=inherit|private|shared:
inherit: don't do any keyring magic (this is the default in systemd --user)
private: a private keyring as before (default in systemd --system)
shared: the new setting
projects / thirdparty / systemd.git / log
