Sam Morris [Mon, 8 Oct 2018 11:03:28 +0000 (12:03 +0100)]
resolved: have the stub resolver listen on both TCP and UDP by default
RFC7766 section 4 states that in the absence of EDNS0, a response that
is too large for a 512-byte UDP packet will have the 'truncated' bit
set. The client is expected to retry the query over TCP.
Chris Down [Wed, 12 Dec 2018 10:49:35 +0000 (10:49 +0000)]
cgroup: Don't explicitly check for member in UNIT_BEFORE
The parent slice is always filtered ahead of time from UNIT_BEFORE, so
checking if the current member is the same as the parent unit will never
pass.
I may also write a SLICE_FOREACH_CHILD macro to remove some more of the
parent slice checks, but this requires a bit of a rework and general
refactoring and may not be worth it, so let's just do this for now.
core: when a unit state changes only propagate to jobs after reloading is complete
Previously, we'd immediately propagate unit state changes into any jobs
pending for them, always. With this we only do this if the manager is
out of the "reload" state. This fixes the problem #8803 tried to
address, by simply not completing jobs until after the reload (and thus
reestablishment of the dbus connection) is complete.
Note that there's no need to later on explicitly catch up with the
missed job state changes (i.e. there's no need to call
unit_process_job() later one explicitly). That's because for jobs in
JOB_WAITING state on deserialization all jobs are requeued into the run
queue anyway, and thus checked again if they can complete now. And for
JOB_RUNNING jobs unit_catchup() phase is going to trigger missed out
state changes *after* the reload complete anyway (after all that's what
distinguishes from unit_coldplug()).
Let's add a helper call unit_deserialize_job() for this purpose, and
let's move registration in the global jobs hash table into
job_install_deserialized() so that it it is done after all superficial
checks are done, and before transitioning into installed states, so that
rollback code is not necessary anymore.
job: be more careful when removing job object from jobs hash table
Let's validate that the ID is actually allocated to us before remove a
job.
This is relevant as various bits of code will call job_free() on
partially set up Job objects, and we really shouldn't remove another job
object accidentally from the hash table, when the set up didn't
complete.
Memory management is borked for this, and moreover this is unnecessary
since f0831ed2a03, i.e. since coldplug() and catchup() are two different
concepts: the former restoring the state from before a reload, the
latter than adjusting it again to the actual status in effect after the
reload.
meson: make net.naming-scheme= default configurable
This is useful for distributions, where the stability of interface names should
be preseved after an upgrade of systemd. So when some specific release of the
distro is made available, systemd defaults to the latest & greatest naming
scheme, and subsequent updates set the same default. This default may still
be overriden through the kernel and env var options.
A special value "latest" is also allowed. Without a specific name, it is harder
to verride from meson. In case of 'combo' options, meson reads the default
during the initial configuration, and "remembers" this choice. When systemd is
updated, old build/ directories could keep the old default, which would be
annoying. Hence, "latest" is introduced to make it explicit, yet follow the
upstream. This is actually useful for the user too, because it may be used
as an override, without having to actually specify a version.
With this we can stabilize how naming works for network interfaces. A
user can request through a kernel cmdline option or an env var which
scheme to follow. The idea is that installers use this to set into stone
(a very soft stone though) the scheme used during installation so that
interface naming doesn't change afterwards anymore.
Why use env vars and kernel cmdline options, and not a config file of
its own?
Well, first of all there's no obvious existing one to use. But more
importantly: I have the feeling that this logic is kind of an incomplete
hack, and I simply don't want to do advertise this as a perfectly
working solution. So far we used env vars for the non-so-official
options and proper config files for the official stuff. Given how
incomplete this logic is (i.e. the big variable for naming remains the
kernel, which might expose sysfs attributes in newer versions that we
check for and didn't exist in older versions — and other problems like
this), I am simply not confident in giving this first-class exposure in
a primary configuration file.
We would describe tmpfiles.d through what systemd-tmpfiles does with them, but
I think it's better to start with a geneneral statement what they are. Also,
let's make the description of volatile file systems less prominent.
Also, strenghten the advice to use RuntimeDirectory and mention
{Cache,Logs,Configuration,State}Directory=.
man: reword tmpfiles.d descriptions to refer less to previous descriptions
I think it is OK if some option is described as "similar to ..., but in
addition ...", as long as the "in addition" part is strictly additive this is
unambiguous. Otherwise, we'd have to repeat a lot of text, and then we'd
probably forget to adjust some of the descriptions when doing changes.
But when the "in addition" part is about replacing or removing parts of
functionality, it is better to avoid this pattern and describe the later option
from scratch.
Some paragraph breaks are added and minor changes made. UID/GID is changed to
user/group, since we generally expect user/group names to be used, not numeric
ids.
cg_ns_supported() caches, so the condition was really checked just once, but
it looks weird to assign the return value to arg_use_cgns (if the variable is not present),
because then the other checks are effectively equivalent to
if (cg_ns_supported() && cg_ns_supported()) { ...
and later
if (!cg_ns_supported() || !cg_ns_supported()) { ...
This imports the wiki page for predictable interface names. I think it's
useful to preserve history here because it's a contentious subject, and
it's useful to know when what happened.
udevadm: allow a .device unit to be specified for query and trigger
This is convenient when working with device units in systemd. Instead of
converting the systemd unit name to a path to feed to udevadm, udevadm
info|trigger can be called directly on the unit name.
The man page is reworked a bit to describe the modern syntax with positional
arguments first. It's just simpler to use than the positional options.
udevadm: improve error output when a device is not specified or specified wrong
udevadm would dump help() output, instead of printing a message about what is
wrong. That's just bad UX. Let's use a different message if the argument is
missing, and a different one if it is invalid.
Also, rework the code to separate the business logic from argument parsing.
Let's not use "default:" in switch statements. This way, the compiler will warn
us if we miss one of the cases.
Emil Soleyman [Tue, 11 Dec 2018 01:18:20 +0000 (01:18 +0000)]
Logitech MX Master 2S: Unifying Receiver and Bluetooth Connectivity (#11078)
* Logitech MX Master 2S: Unifying Receiver and Bluetooth Connectivity
Logitech MX Master 2S can connect through either the unifying receiver
or bluetooth. Clarify that the previous listing was for unifying
receiver and add listing for bluetooth. Note the MOUSE_DPI differences
between the two listings.
Thomas Haller [Fri, 23 Nov 2018 21:19:26 +0000 (22:19 +0100)]
network: fix handling of uninitialized and zero IAID setting
An earlier commit 0e408b82b (dhcp6-client: handle IAID with value zero)
introduced a flag to sd_dhcp6_client to distinguish between an unset
IAID and a value set to zero.
However, that was not sufficient and broke leaving the setting
uninitialized in networkd configuration. The configuration parsing
also must distinguish between the default, unset value and an
explict zero configuration.
pid1: set Description even for devices which don't exist yet
We'd only set the description after the device appeared in sysfs, so
we'd always print
"A start job is running for dev-disk-by\x2duuid-aaaa ... aaaa.device (42s / 1min 30s)"
Let's make this
"A start job is running for /dev/disk/by-duuid/aaaa ... aaaa (42s / 1min 30s)"
nspawn: move most validation checks and configuration mangling into verify_arguments()
That's what the function is for after all, and only if it's done there
we can verify the effect of .nspawn files correctly too: after all we
should not just validate that everything configured on the command line
makes sense, but the stuff configured in the .nspawn files, too.
nspawn: split out code parsing env vars into a function of its own
This then let's us to ensure it's called after we parsed the cmdline,
and after we loaded the settings file, so that it these env var settings
override everything loaded from there.
There seems to be no error per se. RequiresMountsFor=%s%s%s..%s%s%s is expanded to
RequiresMountsFor=/bin/zsh/bin/zsh/bin/zsh/bin/zsh/..., which takes a bit of time,
and then we iterate over this a few times, creating a hashmap with a hashmap
for each prefix of the path, each with one item pointing back to the original unit.
Takes about 0.8 s on my machine.
pid1: fix (harmless) off-by-one in PATH_MAX comparison
PATH_MAX is supposed to include the terminating NUL byte. But we already
check that there is no NUL byte in the specified path. Hence the maximum
length we can expect is PATH_MAX - 1.
This doesn't change much, but makes this use of PATH_MAX consistent with the
rest of the codebase.
projects / thirdparty / systemd.git / log
