KeyringMode option is useful for user services. Also, documentation for the
option suggests that the option applies to user services. However, setting the
option to any of its allowed values has no effect.
This commit fixes that and removes EXEC_NEW_KEYRING flag. The flag is no longer
necessary: instead of checking if the flag is set we can check if keyring_mode
is not equal to EXEC_KEYRING_INHERIT.
Michal Sekletar [Fri, 14 Dec 2018 14:17:27 +0000 (15:17 +0100)]
journald: correctly attribute log messages also with cgroupsv1
With cgroupsv1 a zombie process is migrated to root cgroup in all
hierarchies. This was changed for unified hierarchy and /proc/PID/cgroup
reports cgroup to which process belonged before it exited.
Be more suspicious about cgroup path reported by the kernel and use
unit_id provided by the log client if the kernel reports that process is
running in the root cgroup.
Users tend to care the most about 'log->unit_id' mapping so systemctl
status can correctly report last log lines. Also we wouldn't be able to
infer anything useful from "/" path anyway.
Tore Anderson [Mon, 17 Dec 2018 08:15:59 +0000 (09:15 +0100)]
resolve: enable EDNS0 towards the 127.0.0.53 stub resolver
This appears to be necessary for client software to ensure the reponse data
is validated with DNSSEC. For example, `ssh -v -o VerifyHostKeyDNS=yes -o
StrictHostKeyChecking=yes redpilllinpro01.ring.nlnog.net` fails if EDNS0 is
not enabled. The debugging output reveals that the `SSHFP` records were
found in DNS, but were considered insecure.
Note that the patch intentionally does *not* enable EDNS0 in the
`/run/systemd/resolve/resolv.conf` file (the one that contains `nameserver`
entries for the upstream DNS servers), as it is impossible to know for
certain that all the upstream DNS servers handles EDNS0 correctly.
NeilBrown [Thu, 4 Oct 2018 05:49:22 +0000 (15:49 +1000)]
core/mount: minimize impact on mount storm.
If we create 2000 mounts (on a 1-CPU qemu VM) with
mkdir -p /MNT/{1..2000}
time for i in {1..2000}; do mount --bind /etc /MNT/$i ; done
it takes around 20 seconds to complete. Much of this time is taken up
by systemd repeatedly processing /proc/self/mountinfo.
If I disable the processing, the time drops to about 4 seconds.
I have reports that on a larger system with multiple active user sessions, each
with it's own systemd, the impact can be higher.
One particular use-case where a large number of mounts can be expected in quick
succession is when the "clearcase" SCM starts up.
This patch modifies the handling up events from /proc/self/mountinfo so
that systemd backs off when a storm is detected. Specifically the time to process
mountinfo is measured, and the process will not be repeated until 10 times
that duration has passed. This ensures systemd won't use more than 10% of
real time processing mountinfo.
With this patch, my test above takes about 5 seconds.
Let's make sure the first hashmap we destroy also frees all machines,
because otherwise when freeing the other hashmaps we'll try to
deregister the contained machines from the hashmaps already destroyed.
Apparently, people do use nscd, hence play somewhat nice with it, and
let's explicitly flush nscd caches whenever we register a new
user/group.
This patch only adds the actual refresh request invocation. Later
commits then issue this call at appropriate moments.
Note that the nscd protocol is not officially documented though very
simple. This code is written very defensively so that incompatibilities
don't affect us much.
Given that glibc really has a duty to maintain compat between
differently compiled programs and their system nscd they can't break API
and thus it should be safe for us to implement an alternative,
minimalistic client.
Ideally this kind of explicit, global cache flushing would not be necessary.
However nscd currently has no cache coherency protocol, hence we can't
really implement this better. The only concept it knows is a TTL for
positive hosts lookups. Hoewver for negative lookups or any of the other
tables nothing is available.
lldp: simplify compare_func, using ?: to chain comparisons
The ?: operator is very useful for chaining comparison functions
(strcmp, memcmp, CMP), since its behavior is to return the result
of the comparison function call if non-zero, or continue evaluating
the chain of comparison functions.
This simplifies the code in that using a temporary `r` variable
to store the function results is no longer necessary and the checks
for non-zero to return are no longer needed either, resulting in a
typical three-fold reduction to the number of lines in the code.
Introduce a new memcmp_nn() to compare two memory buffers in
lexicographic order, taking length in consideration.
Tested: $ ninja -C build/ test
All test cases pass. In particular, test_multiple_neighbors_sorted()
in test-lldp would catch regressions introduced by this commit.
fileio: fail early if we can't return the number of bytes we read anymore in an int
This is mostly paranoia, but let's better be safer than sorry. This of
course means there's always an implicit limit to how much we can read at
a time of 2G. But that should be ample.
time-out
n 1: a brief suspension of play; "each team has two time-outs left"
From The Free On-line Dictionary of Computing (18 March 2015) [foldoc]:
timeout
A period of time after which an error condition is raised if
some event has not occured. A common example is sending a
message. If the receiver does not acknowledge the message
within some preset timeout period, a transmission error is
assumed to have occured.
Thomas Haller [Thu, 13 Dec 2018 18:59:46 +0000 (19:59 +0100)]
in-addr-util: fix undefined result for in4_addr_netmask_to_prefixlen(<0.0.0.0>)
u32ctz() was undefined for zero due to __builtin_ctz() [1].
Explicitly check for zero to make the behavior defined.
Note that this issue only affected in4_addr_netmask_to_prefixlen()
which is the only caller.
It may seem slightly odd, to return 32 (bits) for utz(0). But that
is what in4_addr_netmask_to_prefixlen() needs, and it probably makes
the most sense here.
Yu Watanabe [Fri, 14 Dec 2018 00:28:29 +0000 (09:28 +0900)]
sd-device: do not modify socket option(s) if socket is passed by PID1
If the socket fd is passed by PID1, then it is created by .socket unit
and we have already set sufficient option(s) for the socket.
So, let's not touch the passed socket.
units: replace symlinks in units/user/ by real files
We already *install* those as real files since de78fa9ba0be55b01066ca5a716c6673d76b817b.
Meson will start to copy symlinks as-is, so we would get dangling symlinks in
/usr/lib/systemd/user/.
I considered the layout in our sources to match the layout in the installation
filesystem (i.e. creating units/system/ and moving all files from units/ to
units/system/), but that seems overkill. By using normal files for both we get
some duplication, but those files change rarely, so it's not a big downside in
practice.
shared/install: ignore symlinks which have lower priority than the unit file
In #10583, a unit file lives in ~/.config/systemd/user, and
'systemctl --runtime --user mask' is used to create a symlink in /run.
This symlink has lower priority than the config file, so
'systemctl --user' will happily load the unit file, and does't care about
the symlink at all.
But when asked if the unit is enabled, we'd look for all symlinks, find the
symlink in the runtime directory, and report that the unit is runtime-enabled.
In this particular case the fact that the symlink points at /dev/null, creates
additional confusion, but it doesn't really matter: *any* symlink (or regular
file) that is lower in the priority order is "covered" by the unit fragment,
and should be ignored.
Franck Bui [Wed, 12 Dec 2018 12:46:32 +0000 (13:46 +0100)]
vconsole-setup: fonts copy will fail if the current terminal is in graphical mode
If the terminal is in graphical mode, the kernel will refuse to copy the fonts
and will return -EINVAL.
Also having the graphical mode in effect probably indicates that the terminal
is in used by another application and we shouldn't interfer in such cases.
shared/install: remove two conditionals which are always false
The name argument in UnitFileInstallInfo (i->name) should always be a unit
file name, so the conditional always takes the 'else' branch.
The only call chain that links to find_symlinks_fd() is unit_file_lookup_state
→ find_symlinks_in_scope → find_symlinks → find_symlinks_fd. But
unit_file_lookup_state calls unit_name_is_valid(name), and then name is used
to construct the UnitFileInstallInfo object in install_info_discover, which just
uses the name it was given.
It would work when the generator was run by systemd, since generators
are always started in "/", but when running the generator for debugging
purposes the result would be ... different.
generators: define custom main func definer and use it where applicable
There should be no functional difference, except that the error message
is changd from "three or no arguments" to "zero or three arguments". Somehow
the inverted form always seemed strange.
umask() call is also dropped from run-generator. I think it wasn't dropped in 053254e3cb215df3b8c905bc39b920f8817e1c7d because the run generator was merged
around the same time.
Sam Morris [Mon, 8 Oct 2018 11:03:28 +0000 (12:03 +0100)]
resolved: have the stub resolver listen on both TCP and UDP by default
RFC7766 section 4 states that in the absence of EDNS0, a response that
is too large for a 512-byte UDP packet will have the 'truncated' bit
set. The client is expected to retry the query over TCP.
Chris Down [Wed, 12 Dec 2018 10:49:35 +0000 (10:49 +0000)]
cgroup: Don't explicitly check for member in UNIT_BEFORE
The parent slice is always filtered ahead of time from UNIT_BEFORE, so
checking if the current member is the same as the parent unit will never
pass.
I may also write a SLICE_FOREACH_CHILD macro to remove some more of the
parent slice checks, but this requires a bit of a rework and general
refactoring and may not be worth it, so let's just do this for now.
projects / thirdparty / systemd.git / log
