network: recreate link if its interface name is changed (#8795)
If an interface name is changed, then the link state, especially
managed or not, may need to be updated, as its corresponding
.link or .network files may be different. So, let's once drop
the link and recreate a new link object.
This cleans up handling of MTU values across the codebase. Previously
MTU values where stored sometimes in uint32_t, sometimes in uint16_t,
sometimes unsigned and sometimes in size_t. This now unifies this to
uint32_t across the codebase, as that's what netlink spits out, and what
the majority was already using.
Also, all MTU parameters are now parsed with config_parse_mtu() and
config_parse_ipv6_mtu() is dropped as it is now unneeded.
(Note there is one exception for the MTU typing: in the DCHPv4 code we
continue to process the MTU as uint16_t value, as it is encoded like
that in the protocol, and it's probably better stay close to the
protocol there.)
We use MTUs all over the place, let's add a unified, strict parser for
it, that takes MTU ranges into account.
We already have parse_ifindex() close-by, hence this appears to be a
natural addition, in particular as the range checking is not entirely
trivial to do, as it depends on the protocol used.
If enabling controller for some reason fails we need to clear error
for the FILE stream. Enabling remaining controllers would otherwise
fail because write_string_stream_ts() checks for ferror(f) and returns
-EIO if there is one.
meson: drop 'name' argument in cc.has_argument() (#8823)
This fixes the following warning with clang and meson-0.46.0,
```
WARNING: Passed invalid keyword argument "name".
WARNING: This will become a hard error in the future.
WARNING: Passed invalid keyword argument "name".
WARNING: This will become a hard error in the future.
Compiler for C supports arguments -Wno-typedef-redefinition: YES
WARNING: Passed invalid keyword argument "name".
WARNING: This will become a hard error in the future.
WARNING: Passed invalid keyword argument "name".
WARNING: This will become a hard error in the future.
Compiler for C supports arguments -Wno-gnu-variable-sized-type-not-at-end: YES
```
meson: do not link libsystemd_static into libcore (#8813)
(or in terms of the names of the actual files on disk, do not link
libsystemd-shared-238.a into libcore.a).
libsystemd_static is linked into libsystemd_shared, which in turn means that
anything that links to libcore and libsystemd_shared will get libsystemd_static
twice:
This propagation of the dependency seems correct (in the sense that meson is
doing the expected thing based on the given configuration). Linking was done
this way in the original meson conversion. I was probably trying to get
everything to compile and link, I'm not sure why this particular choice was
made. In the meantime, meson has gotten better at propagating dependencies, so
it's possible that this had slightly different effect in the original
conversion, but I did not verify this. Either way, I think we should drop this.
This is more correct because we're not linking the same code twice.
With the patch, libystemd_static is used in exactly four places:
- src/shared/libsystemd-shared-238.so
- src/udev/libudev.so.1.6.10
- pam_systemd.so
- test-bus-error
(compared to a bunch more executables before, including systemd,
systemd-analyze, test-hostname, test-ns, etc.)
Size savings are also noticable:
$ size /var/tmp/inst?/usr/lib/systemd/libsystemd-shared-238.so
text data bss dec hex filename 2397826 578488 15920 2992234 2da86a /var/tmp/inst1/usr/lib/systemd/libsystemd-shared-238.so 2397826 578488 15920 2992234 2da86a /var/tmp/inst2/usr/lib/systemd/libsystemd-shared-238.so
$ size /var/tmp/inst?/usr/lib/systemd/systemd
text data bss dec hex filename 1858790 261688 9320 2129798 207f86 /var/tmp/inst1/usr/lib/systemd/systemd 1556358 258704 8072 1823134 1bd19e /var/tmp/inst2/usr/lib/systemd/systemd
$ du -s /var/tmp/inst?
52216 /var/tmp/inst1
50844 /var/tmp/inst2
https://github.com/google/oss-fuzz/issues/1330#issuecomment-384054530 might be related.
tree-wide: drop redundant _cleanup_ macros (#8810)
This drops a good number of type-specific _cleanup_ macros, and patches
all users to just use the generic ones.
In most recent code we abstained from defining type-specific macros, and
this basically removes all those added already, with the exception of
the really low-level ones.
Having explicit macros for this is not too useful, as the expression
without the extra macro is generally just 2ch wider. We should generally
emphesize generic code, unless there are really good reasons for
specific code, hence let's follow this in this case too.
Note that _cleanup_free_ and similar really low-level, libc'ish, Linux
API'ish macros continue to be defined, only the really high-level OO
ones are dropped. From now on this should really be the rule: for really
low-level stuff, such as memory allocation, fd handling and so one, go
ahead and define explicit per-type macros, but for high-level, specific
program code, just use the generic _cleanup_() macro directly, in order
to keep things simple and as readable as possible for the uninitiated.
Note that before this patch some of the APIs (notable libudev ones) were
already used with the high-level macros at some places and with the
generic _cleanup_ macro at others. With this patch we hence unify on the
latter.
gpt-auto-generator: emit warnings and fail if we fail to query mount points
Right now gpt-auto-generator will iterate through all mount entries, and
silently ignore failure to check if the mount point target is empty.
This can hide real errors (in particular from MAC), so instead let's warn
and return failure at the end if this happens. We will still iterate
over other candidates, so there should be no change in behaviour.
Logging is moved into path_is_busy() to avoid the duplication of the same
logging code in the two callers.
Chris Lesiak [Tue, 24 Apr 2018 14:50:42 +0000 (09:50 -0500)]
fileio.c: fix incorrect mtime
A regression was introduced that caused the mtime of /etc/.updated
and /var/.updated to be the current time when systemd-update-done
ran instead of being copied from /usr.
This was nearly fixed, but due to fflush being called after mtime
was carefully set, it was overwritten with the current time.
string-util: teach strip_tab_ansi() to deal with CSO sequences
With the recent terminal_urlify() APIs we'll now sometimes generate
clickable link CSO sequences. Hence we should also be able to remove
them again from strings. This beefs up the logic to do so.
> When we originally added the errno patching we went for a "best of both
> worlds" approach, i.e. that we override errno if an error is specified, but
> if no error is specified (i.e. 0 is passed as error code) then we use the
> previously set errno, similar in style how plain `printf()` would do it. In
> retrospect I think we almost never purposefully made use of the second,
> i.e. the plain `printf()` logic, but we multiple times ran into this case
> accidentally and introduced a bug. Hence yes, it probably makes sense to
> switch this over, and consistently ignore the `errno` already set and always
> override it with the error passed in. The only problem I see with that is: I
> wonder if there might be a case or two lurking somewhere where we actually
> made use of the "best of both worlds" approach, and if so, if we can detect
> where... (But then again, even if there is, and we fail to find those cases,
> maybe that's not all bad, as it's just a few new bugs against probably fixing
> many more old and future bugs, if you follow what I mean).
I scanned our codebase, and found some bugs in the value passed to log_*_errno,
but no intentional cases of error=0 being passed.
core/device: avoid bogus errno use and invert ratelimit_test()
I'm not sure if I understand the original code. AFAICS, errno does not
have to be set at all in this callback.
ratelimit_test() returns positive if we are under limit. The code would only
log if the condition happened very often, which I assume is not inteded, and
this check was supposed to prevent too much logging.
hwdb: Use wlan keycode for all Dell systems (#8762)
Once the seat is acquired, gnome-settings-daemon (GSD) takes full
control of rfkill by sending RFKILL_IOCTL_NOINPUT ioctl to disable
rfkill control in kernel.
Since GSD expects wlan keycode when the hotkey gets pressed, we should
change the "unknown" to "wlan" accordingly.
Nicolas Boichat [Tue, 27 Mar 2018 03:24:01 +0000 (11:24 +0800)]
systemd-hwdb update: Return non-zero exit code on error when --strict is used
- Add a new flag --strict to tell systemd-hwdb to return a
non-zero code on error.
- Make systemd-hwdb update return an error when any parsing
error occurs (only if strict flag is set).
Nicolas Boichat [Tue, 20 Mar 2018 05:36:58 +0000 (13:36 +0800)]
udevadm/hwdb: Return non-zero exit code on error when --strict is used
- Add a new flag --strict to tell udevadm hwdb to return a
non-zero code on error.
- Make udevadm hwdb --update return an error when any parsing
error occurs (only if strict flag is set).
doc: add a bit more documentation about systemd and cgroups and cgroupsv2 and delegation
Ultimately we should replace the relevant wiki texts with documentation
maintained as part of our project tree. This is a start. It can't
replace the wiki documentation in full yet, but I think it's already
very useful.
device: skip deserialization of device units when udevd is not running
Do not try to party initialize a device during deserialization if it's not
known by udev (anymore) and therefore hasn't been seen during device
enumeration.
The device unit in this case has not been initialized properly and setting it
in the "plugged" state can be confusing.
Actually this happens during every boots when PID switches to the new rootfs:
PID is reexecuted and enumerates devices but since udev is not running, the
list of enumerated devices is empty.
device: make sure to always retroactively start device dependencies
PID1 updates the state of device units upon 2 different events:
- when it processes an event sent by udev and in this case the device deps are
started if the device enters in the "plugged" state.
- when it enumerates all devices during its startup or when it is asked to
reload its configuration data but in this case the device deps (if any) are
not retroactively started.
When udev processes a new "add" kernel event, it first registers the new device
in its databases then sends an event to systemd.
If for any reason, systemd is asked to reload its configuration between the
previous 2 steps, it might see for the first time the new device while scanning
/sys for all devices. Only during a second step, udev will send the event for
the new device.
In this peculiar case the device deps wont be started (even though the device
is first seen by PID1).
Indeed when reloading its configurations, PID1 will put the device unit in the
"plugged" state but without starting the device deps. Thereafter PID1 will get
the event from udev for the new device but the device unit will be in "plugged"
state already therefore it won't see any need to start the device dependencies.
Rather than assuming that during the reloading of systemd manager configuration
all devices listed in udev DBs have been already processed and should be put in
the "plugged" state (done by device_coldplug()), this patch does that only for
devices which have been processed via an udev event (device_dispatch_io())
previously. In this case we set "d->found" to "DEVICE_FOUND_UDEV" and we make
also sure to no more initialize "d->found" while enumerating devices. Instead
this field is now saved/restored while devices are serialized.
terminal: add internal API to format URLs for display in capable terminals
Newer terminals (in particular gnome-terminal) understand special escape
sequence for formatting clickable links. Let's support that to make our
tool output more clickable where that's appropriate.
The one big issue is that 'less' currently doesn't grok this, and
doesn't ignore sequence like regular terminal implementations do if they
don't support it. Hence for now, let's disable URL output if a pager is
used. We should revisit that though as soon as less added support for it
and enough time passed for it to enter various distributions.
Double newlines (i.e. one empty lines) are great to structure code. But
let's avoid triple newlines (i.e. two empty lines), quadruple newlines,
quintuple newlines, …, that's just spurious whitespace.
It's an easy way to drop 121 lines of code, and keeps the coding style
of our sources a bit tigther.
mkosi: drop dumping all test output to console again
As it appears meson's test cases nowadays (?) show useful logs for
failing tests anyway, hence there's no need to show them unconditionally
in full every time anymore. Let's hence simplify and drop this.
This makes `resolvectl` use the verb style command line, e.g.,
`resolvectl status` or `resolvectl tlsa tcp fedoraproject.org:443`.
For compatibility, if the invocation name is `systemd-resolve`,
then it accepts the old syntax, e.g. `systemd-resolve --status`.
First of all, it's frickin' ugly and wrong, as IPC sockets should be
placed in /run and definitely not under a guessable name under
world-writable /tmp. Secondly, it can't even work as we set
PrivateTmp=yes on the service.
Hence, let's clean up the example, and simply use a socket in /run
instead.
projects / thirdparty / systemd.git / log
