Implements IPv4LL with respect to RFC 3927
(http://tools.ietf.org/rfc/rfc3927.txt) and integrates it
with networkd. Majority of the IPv4LL state machine is
taken from avahi (http://avahi.org/) project's autoip.
IPv4LL can be enabled by IPv4LL=yes under [Network]
section of .network file.
IPv4LL works independent of DHCP but if DHCP lease is
aquired, then LL address will be dropped.
[tomegun: removed a trailing newline and a compiler warning]
conf-parser: drop special casing in config_parse_path()
The code checked for two lvalues that aren't even using
config_parse_path(), so let's drop these checks and make the function
completely generic again.
logind: ignore lid switch events for 30s after each suspend and 3min after startup
This is needed to give USB docking stations and suchlike time to settle,
so that a display connected to an USB docking station can actually act
as a lid swith inhibitor correctly.
With this change we should have somewhat reliable docking station
support in place.
logind: ignore lid switch if more than 1 display is connected
Previously we expected the desktop environment to take an inhibitor
lock, but this opened a race on boot-up where logind might already be
running but no DE is active.
Hence, let's move checking for additional displays into logind. This
also opens up this logic for other DEs, given that only GNOME
implemented the inhibitor logic so far.
Mike Gilbert [Mon, 3 Mar 2014 04:37:39 +0000 (23:37 -0500)]
Fix systemd-stdio-bridge symlink
The symlink is created in bindir (/usr/bin), and points to a binary
which lives in rootlibexecdir (/lib/systemd or /usr/lib/systemd). A
relative symlink does not work here.
bus: add sd_bus_track object for tracking peers, and port core over to it
This is primarily useful for services that need to track clients which
reference certain objects they maintain, or which explicitly want to
subscribe to certain events. Something like this is done in a large
number of services, and not trivial to do. Hence, let's unify this at
one place.
This also ports over PID 1 to use this to ensure that subscriptions to
job and manager events are correctly tracked. As a side-effect this
makes sure we properly serialize and restore the track list across
daemon reexec/reload, which didn't work correctly before.
This also simplifies how we distribute messages to broadcast to the
direct busses: we only track subscriptions for the API bus and
implicitly assume that all direct busses are subscribed. This should be
a pretty OK simplification since clients connected via direct bus
connections are shortlived anyway.
Things like 3B4T, 4B50B, 400 100 (meaning 4*1024**4+3, 54, and 500,
respectively) are now disallowed. It is necessary to say 4T3B, 54B,
500 instead. I think this was confusing and error prone.
As a special form, 400B 100 is allowed, i.e. "B" suffix is treated
as different from "", although they mean the same thing.
Tom Gundersen [Fri, 28 Feb 2014 00:02:01 +0000 (01:02 +0100)]
networkd: add networkd-wait-online
This is mostly a proof of concept to try sd-network, so we don't
hook it up with a .service file quite yet. We probably want it to
be more clever about deciding when we are 'online'.
The binary will wait for at least one network managed by networkd,
and until all networks managed by networkd are configured.
Lukas Nykryn [Thu, 27 Feb 2014 10:06:37 +0000 (11:06 +0100)]
cdrom_id: use the old MMC fallback
https://bugzilla.redhat.com/show_bug.cgi?id=1038015
The problem seems to be that the your virtual DVD is emulating a really
old DVD device, and doing it kind of strangely.
> dracut:# /lib/udev/cdrom_id --debug /dev/sr0
> probing: '/dev/sr0'
> INQUIRY: [IMM ][Virtual CD/DVD ][0316]
> GET CONFIGURATION failed with SK=5h/ASC=24h/ACQ=00h
So your virtual drive rejects the GET CONFIGURATION command as illegal.
Other pre-MMC2 drives that don't accept this command usually return the
error
SK=5h,ASC=20h (invalid/unsupported command code), in which case cdrom_id
tries an older method, and then ID_CDROM_MEDIA_TRACK_COUNT_DATA gets set
and all the /dev/disk/by-label (etc) links get set up.
The virtual drive returns the error SK=5h,ASC=24h (invalid field in
Command Descriptor Block), which cdrom_id doesn't handle, so it gives up
and the links never get made.
The ideal solution would be to make the IMM to emulate a device that's
less than 15 years old, but I'm not going to hold my breath waiting for
that.
So probably cdrom_id should also use the old MMC fallback when the error
is SK=5h,ASC=24h, and then all of this would work as expected.
Armin K [Wed, 26 Feb 2014 14:02:55 +0000 (15:02 +0100)]
build-sys: Do not distribute generated udev service files
They are already in nodist_systemunit_DATA and if they are
shipped, they contain hardcoded paths to udevadm and
systemd-udevd which will cause them to fail to start when
rootprefix != prefix and rootlibdir != libdir.
Uoti Urpala [Thu, 20 Feb 2014 01:00:09 +0000 (03:00 +0200)]
logs-show: fix corrupt output with empty messages
If a message had zero length, journalctl would print no newline, and
two output lines would be concatenated. Fix. The problem was
introduced in commit 31f7bf199452 ("logs-show: print multiline
messages"). Affected short and verbose output modes.
Before fix:
Feb 09 21:16:17 glyph dhclient[1323]: Feb 09 21:16:17 glyph NetworkManager[788]: <info> (enp4s2): DHCPv4 state changed nbi -> preinit
after:
Feb 09 21:16:17 glyph dhclient[1323]:
Feb 09 21:16:17 glyph NetworkManager[788]: <info> (enp4s2): DHCPv4 state changed nbi -> preinit
Some specifications we want to stay compatibility actually document
/var/run, not /run, and we should stay compatible with that. In order to
make sure our D-Bus implementation works on any system, regardless if
running systemd or not, we should always use /var/run which is the
only path mandated by the D-Bus spec.
Similar, glibc hardcodes the utmp location to /var/run, and this is
exposed in _UTMP_PATH in limits.h, hence let's stay in sync with this
public API, too.
We simply do not support systems where /var/run is not a symlink → /run.
Hence both are equivalent. Staying compatible with upstream
specifications hence weighs more than cleaning up superficial
appearance.
This new unit settings allows restricting which address families are
available to processes. This is an effective way to minimize the attack
surface of services, by turning off entire network stacks for them.
This is based on seccomp, and does not work on x86-32, since seccomp
cannot filter socketcall() syscalls on that platform.
David Herrmann [Tue, 25 Feb 2014 12:08:24 +0000 (13:08 +0100)]
login: set pos-slot to fallback on pos-eviction
If we evict a session position, we open the position slot for future
sessions. However, there might already be another session on the same
position if both were started on the same VT. This is currently done if
gdm spawns the session on its own Xserver.
Hence, look for such a session on pos-eviction and claim the new slot
immediately.
David Herrmann [Tue, 25 Feb 2014 11:20:25 +0000 (12:20 +0100)]
login: fix pos-array allocation
GREEDY_REALLOC takes a pointer to the real size, not the array-width as
argument. Therefore, our array is currently way to small to keep the seat
positions.
Introduce GREEDY_REALLOC0_T() as typed version of GREEDY_REALLOC and store
the array-width instead of array-size.
Łukasz Stelmach [Wed, 19 Feb 2014 15:39:04 +0000 (16:39 +0100)]
smack: relabel directories and files created by systemd
Systemd creates directories in /dev. These directories will
get the label of systemd, which is the label of the System
domain, which is not accessable to everyone. Relabel the
directories, files and symlinks created so that they can be
generally used.
Based on a patch by Casey Schaufler <casey@schaufler-ca.com>.