resolved: use RRSIG expiry and original TTL for cache management
When we verified a signature, fix up the RR's TTL to the original TTL
mentioned in the signature, and store the signature expiry information
in the RR, too. Then, use that when adding RRs to the cache.
This renames dns_transaction_stop() to dns_transaction_stop_timeout()
and makes it only about stopping the transaction timeout. This is safe,
as in most occasions we call dns_transaction_stop() at the same time as
dns_transaction_close_connection() anyway, which does the rest of what
dns_transaction_stop() used to do. And in the one where we don't call
it, it's implicitly called by the UDP emission or TCP connection code.
This also closes the connections as we enter the validation phase of a
transaction, so that no further messages may be received then.
resolved: only keep a single list of supported signature algorithms
This removes dnssec_algorithm_supported() and simply uses the
algorithm_to_gcrypt() result as indication whether a DNSSEC algorithm is
supported.
The patch also renames "algorithm" to "md_algorithm", in a few cases, in
order to avoid confusion between DNSSEC signature algorithms and gcrypt
message digest algorithms.
shared: relax restrictions on valid domain name characters a bit
Previously, we'd not allow control characters to be embedded in domain
names, even when escaped. Since cloudflare uses \000 however to
implement its synthethic minimally covering NSEC RRs, we should allow
them, as long as they are properly escaped.
Alban Crequy [Tue, 8 Dec 2015 00:16:07 +0000 (01:16 +0100)]
nspawn: userns and unified cgroup: chown cgroup.events
When starting a container in a new user namespace, systemd-nspawn chowns
the cgroup knob files so they are usable by the container. But the
cgroup knob file "cgroup.events" was missing. This file exists when the
unified hierarchy is used.
resolved: rename "features" variables to "feature_level"
The name "features" suggests an orthogonal bitmap or suchlike, but the
variables really encode only a linear set of feature levels. The type
used is already called DnsServerFeatureLevel, hence fix up the variables
accordingly, too.
This moves management of the OPT RR out of the scope management and into
the server and packet management. There are now explicit calls for
appending and truncating the OPT RR from a packet
(dns_packet_append_opt() and dns_packet_truncate_opt()) as well as a
call to do the right thing depending on a DnsServer's feature level
(dns_server_adjust_opt()).
This also unifies the code to pick a server between the TCP and UDP code
paths, and makes sure the feature level used for the transaction is
selected at the time the server is picked, and not changed until the
next time we pick a server. The server selction code is now unified in
dns_transaction_pick_server().
This all fixes problems when changing between UDP and TCP communication
for the same server, and makes sure the UDP and TCP codepaths are more
alike. It also makes sure we never keep the UDP port open when switchung
to TCP, so that we don't have to handle incoming datagrams on the latter
we don't expect.
As the new code picks the DNS server at the time we make a connection,
we don't need to invalidate the DNS server anymore when changing to the
next one, thus dns_transaction_next_dns_server() has been removed.
resolved: remember explicitly whether we already tried a stream connection
On LLMNR we never want to retry stream connections (since local TCP
connections should work, and we don't want to unnecessarily delay
operation), explicitly remember whether we already tried one, instead of
deriving this from a still stored stream object. This way, we can free
the stream early, without forgetting that we tried it.
shared: fix handling of suffix "." in dns_name_compare_func()
All our other domain name handling functions make no destinction between
domain names that end in a dot plus a NUL, or those just ending in a
NUL. Make sure dns_name_compare_func() and dns_label_unescape_suffix()
do the same.
Previously the calls for emitting DNS UDP packets were just called
dns_{transacion|scope}_emit(), but the one to establish a DNS TCP
connection was called dns_transaction_open_tcp(). Clean this up, and
rename them dns_{transaction|scope}_emit_udp() and
dns_transaction_open_tcp().
resolved: add an automatic downgrade to non-DNSSEC mode
This adds a mode that makes resolved automatically downgrade from DNSSEC
support to classic non-DNSSEC resolving if the configured DNS server is
not capable of DNSSEC. Enabling this mode increases compatibility with
crappy network equipment, but of course opens up the system to
downgrading attacks.
The new mode can be enabled by setting DNSSEC=downgrade-ok in
resolved.conf. DNSSEC=yes otoh remains a "strict" mode, where DNS
resolving rather fails then allow downgrading.
Downgrading is done:
- when the server does not support EDNS0+DO
- or when the server supports it but does not augment returned RRs with
RRSIGs. The latter is detected when requesting DS or SOA RRs for the
root domain (which is necessary to do proofs for unsigned data)
resolved: generate an explicit transaction error when we cannot reach server via TCP
Previously, if we couldn't reach a server via UDP we'd generate an
MAX_ATTEMPTS transaction result, but if we couldn't reach it via TCP
we'd generate a RESOURCES transaction result. While it is OK to generate
two different errors I think, "RESOURCES" is certainly a misnomer.
Introduce a new transaction result "CONNECTION_FAILURE" instead.
resolved: deal with unsigned DS/NSEC/NSEC3 properly
Previously, we'd insist on an RRSIG for all DS/NSEC/NSEC3 RRs. With this
change we don't do that anymore, but also allow unsigned DS/NSEC/NSEC3
if we can prove that the zone they are located in is unsigned.
This collects statistical data about transactions, dnssec verifications
and the cache, and exposes it over the bus. The systemd-resolve-host
tool learns new options to query these statistics and reset them.
Be stricter when searching suitable NSEC3 RRs for proof: generalize the
check we use to find suitable NSEC3 RRs, in nsec3_is_good(), and add
additional checks, such as checking whether all NSEC3 RRs use the same
parameters, have the same suffix and so on.
resolved: when doing NSEC3 proof, first find right NSEC3 suffix
When doing an NSEC3 proof, before detrmining whether a name is the
closest encloser we first need to figure out the longest common suffix
we have with any NSEC3 RR in the reply.
resolved: properly implement RRSIG validation of wildcarded RRsets
Note that this is still not complete, one additional step is still
missing: when we verified that a wildcard RRset is properly signed, we
still need to do an NSEC/NSEC3 proof that no more specific RRset exists.
Otherwise if we have an A lookup that failed DNSSEC validation, but an
AAAA lookup that succeeded, we might end up using the A data, but we
really should not.
resolved: internalize string buffer of dns_resource_record_to_string()
Let's simplify usage and memory management of DnsResourceRecord's
dns_resource_record_to_string() call: cache the formatted string as
part of the object, and return it on subsequent calls, freeing it when
the DnsResourceRecord itself is freed.
resolved: when looking for a SOA RR in a reply, pick the right one
If there are multiple SOA RRs, and we look for a suitable one covering
our request, then make sure to pick the one that is furthest away from
the root name, not just the first one we encounter.
When we are running in test mode, we don't expect any signals.
In fact ^C should end the program. This also avoids permission
issues when running systemd-analyze verify.
Daniel Mack [Tue, 22 Dec 2015 10:37:09 +0000 (11:37 +0100)]
core: re-sync bus name list after deserializing during daemon-reload
When the daemon reloads, it doesn not actually give up its DBus connection,
as wrongly stated in an earlier commit. However, even though the bus
connection stays open, the daemon flushes out all its internal state.
Hence, if there is a NameOwnerChanged signal after the flush and before the
deserialization, it cannot be matched against any pending unit.
To fix this, rename bus_list_names() to manager_sync_bus_names() and call
it explicitly at the end of the daemon reload operation.
Daniel Mack [Fri, 18 Dec 2015 16:28:15 +0000 (17:28 +0100)]
core: fix bus name synchronization after daemon-reload
During daemon-reload, PID1 temporarly loses its DBus connection, so there's
a small window in which all signals sent by dbus-daemon are lost.
This is a problem, since we rely on the NameOwnerChanged signals in order to
consider a service with Type=dbus fully started or terminated, respectively.
In order to fix this, a rewrite of bus_list_names() is necessary. We used
to walk the current list of names on the bus, and blindly triggered the
bus_name_owner_change() callback on each service, providing the actual name
as current owner. This implementation has a number of problems:
* We cannot detect if the the name was moved from one owner to the other
while we were reloading
* We don't notify services which missed the name loss signal
* Providing the actual name as current owner is a hack, as the comment also
admits.
To fix this, this patch carries the following changes:
* Track the name of the current bus name owner, and (de-)serialize it
during reload. This way, we can detect changes.
* In bus_list_names(), walk the list of bus names we're interested in
first, and then see if the name is active on the bus. If it is,
check it it's still the same as it used to be, and synthesize
NameOwnerChanged signals for the name add and/or loss.
This should fully synchronize the current name list with the internal
state of all services.
Michael Scherer [Sun, 20 Dec 2015 12:23:33 +0000 (13:23 +0100)]
Add Seal option in the configuration file for journald-remote
While journal received remotely can be sealed, it can only be done
on the command line using --seal, so for consistency, we will
also permit to set it in the configuration file.
resolved: propagate DNSSEC validation status from auxiliary transactions
Let's make sure we propagate the DNSSEC validation status from an
auxiliary DNSSEC transaction back to the originating transaction, to
improve the error messages we generate.
We have many types of failure for a transaction, and
DNS_TRANSACTION_FAILURE was just one specific one of them, if the server
responded with a non-zero RCODE. Hence let's rename this, to indicate
which kind of failure this actually refers to.
projects / thirdparty / systemd.git / log
