tmpfiles: use log_syntax() for complaining about configuration file errors
In the light of #12926 I needed some log messages for testing. This
tmpfiles one came to mind, since it's frequently seen on typical Fedora
systems. Alas, they didn't actually use log_syntax, and thus weren't
recognizable by the new config file urlifaction code. Let's fix that.
boot,shared: share the definitions of EFI_LOADER_FEATURE macros
This means the the code needs to be kept compatible in the shared header,
but I think that still nicer than having two places to declare the same
things.
I added src/boot to -I, so that efi/foo.h needs to be used. This reduces
the potential for accidentally including the wrong header.
shared/logs-show: urlify CONFIG_FILE in verbose mode
Now all short-*, verbose, with-unit modes are handled. cat, export, json-* are
not, but those are usually used for post-processing, so I don't think it'd be
useful there.
In file included from ../src/basic/macro.h:558,
from ../src/basic/alloc-util.h:9,
from ../src/network/networkd-link.c:7:
../src/network/networkd-link.c: In function ‘link_sysctl_ipv6_enabled’:
../src/basic/log.h:107:9: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
107 | log_internal_realm(LOG_REALM_PLUS_LEVEL(LOG_REALM, (level)), __VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/shared/log-link.h:21:25: note: in expansion of macro ‘log_internal’
21 | log_internal(level, error, _FILE_, __LINE__, __func__, ##__VA_ARGS__); \
| ^~~~~~~~~~~~
../src/shared/log-link.h:33:50: note: in expansion of macro ‘log_link_full’
33 | #define log_link_warning_errno(link, error, ...) log_link_full(link, LOG_WARNING, error, ##__VA_ARGS__)
| ^~~~~~~~~~~~~
../src/network/networkd-link.c:83:24: note: in expansion of macro ‘log_link_warning_errno’
83 | return log_link_warning_errno(link, r,
| ^~~~~~~~~~~~~~~~~~~~~~
../src/network/networkd-link.c:84:77: note: format string is defined here
84 | "Failed to read net.ipv6.conf.%s.disable_ipv6 sysctl property: %m",
| ^~
cc1: some warnings being treated as errors
shared/dm-util: use strncpy_exact() to silence gcc
With gcc-9.1.1-2.fc31.x86_64 and -Doptimization=2:
../src/shared/dm-util.c: In function ‘dm_deferred_remove’:
../src/shared/dm-util.c:35:9: warning: ‘strncpy’ specified bound 128 equals destination size [-Wstringop-truncation]
35 | strncpy(dm.name, name, sizeof(dm.name));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gcc is plain wrong here, because we checked strlen(name) a few lines above, so
there can be no truncation and even the terminator always fits. But let's avoid
the warning.
Dave Reisner [Sat, 6 Jul 2019 16:20:53 +0000 (12:20 -0400)]
importd: Avoid need for fd translation table
Make use of curl_multi_assign to associate each IO sd_event_source with
a CURL object. This means we always get passed the right event source
and don't need to worry about looking up the associated CURL object,
particularly in the case where the FD has been closed on a REMOVE event.
Dan Streetman [Fri, 5 Jul 2019 15:24:55 +0000 (11:24 -0400)]
test/udev-test.pl: cleanup if skipping test
In Ubuntu CI, udev-test.pl is run from the debian/test/udev script,
in a test dir created for it; but udev-test.pl setup mounts a
dir, so if it doesn't cleanup/unmount before exiting, the test dir
autopkgtest created for it can't be removed, and autopkgtest
aborts the entire test suite, for example this output (from a
test run inside an armhf container):
autopkgtest [12:45:36]: test udev: [-----------------------
umount: test/tmpfs: no mount point specified.
mknod: test/tmpfs/dev/null: Operation not permitted
unable to create test/tmpfs/dev/null at ./udev-test.pl line 1611.
Failed to set up the environment, skipping the test at ./udev-test.pl line 1731.
autopkgtest [12:45:41]: test udev: -----------------------]
autopkgtest [12:45:44]: test udev: - - - - - - - - - - results - - - - - - - - - -
udev FAIL non-zero exit status 77
rm: cannot remove '/tmp/autopkgtest.ocPFA6/autopkgtest_tmp/test/tmpfs': Device or resource busy
autopkgtest [12:46:22]: ERROR: "rm -rf /tmp/autopkgtest.ocPFA6/udev-artifacts /tmp/autopkgtest.ocPFA6/autopkgtest_tmp" failed with stderr "rm:
pid1: fix serialization/deserialization of commmands with spaces
Fixes #12258.
This is enough to reproduce:
$ systemd-run bash -c 'sleep 10' && systemctl daemon-reload
would result in
Current command vanished from the unit file.
We would serialize as:
ExecStart 0 /usr/bin/bash /usr/bin/bash -c sleep 10000
which of course can't work.
Now we serialize as
ExecStart 0 /usr/bin/bash "/usr/bin/bash" "-c" "sleep 10".
If execve failed, we would die in safe_close(), because master was already
closed by fdset_close_others() on line 3123. IIUC, we don't need to keep the
fd open after sending it, so let's just close it immediately.
test: drop || return 1 expression which is incompatible with set -e
The `set -e` option is incompatible with a subshell/compound command,
which is followed by || <EXPR>. In such case, the -e option is ignored
in all affected subshells/functions (see man bash(1) for command `set`).
test: correctly handle installation of newly introduced binaries
In certain cases we might attempt to install a binary which is already
present in the test image, yet it's missing from the host system.
In such cases, let's check if the binary indeed exists in the image
before doing any other chcecks. If it does, immediately return with
success.
This was discovered during installation of
/usr/lib/systemd/systemd-bless-boot, which was not present in Ubuntu CI
(as the installed systemd was from the Ubuntu repositories), and the
binary itself was already in the image thanks to `ninja install`.
However, during extraction of binaries from the systemd service files,
another attempt to install this binary was made, which failed due to
`find_binary` being unable to find it.
units: add SystemCallErrorNumber=EPERM to systemd-portabled.service
We use that on all other services, and hence should here too. Otherwise
the service will be killed with SIGSYS when doing something not
whitelisted, which is a bit crass.
Dan Streetman [Fri, 5 Jul 2019 20:42:38 +0000 (16:42 -0400)]
src/network/networkd-dhcp4.c: set prefsrc for classless or static routes
When a DHCP server provides only a gateway, the networkd-dhcp4 code adds a
default route using that gateway, and sets the just-provided address as
the route's prefsrc; this was added in commit 46b0c76e2c355c0d0cc4792abb98cde07b28bc53
However, if the DHCP server has also provided classless route(s), these
are used instead of a default route using the provided gateway; the
networkd-dhcp4 code sets up the classless routes, but does not use the
just-provided dhcp address as the prefsrc of the route(s). Note that
it also doesn't set the prefsrc for static routes, though it should.
If the interface has only the dhcp-provided address, this is not usually
a problem, but if it has another address (e.g. a static address), then
traffic sent through the dhcp-provided gateway might not use the
dhcp-provided source address. If the gateway router only will route
traffic from the dhcp-provided address, then the dhcp client system's
networking through the router will not work.
projects / thirdparty / systemd.git / log
