We were already unconditionally using the unicode character when the
input string was not pure ASCII, leading to different behaviour in
depending on the input string.
journal-remote: implement %m support in mhd_respondf
errno value is not protected (it is undefined after this function returns).
Various mhd_* functions are not documented to protect errno, so this could not
guaranteed anyway.
According to its manual page, flags given to mkostemp(3) shouldn't include
O_RDWR, O_CREAT or O_EXCL flags as these are always included. Beyond
those, the only flag that all callers (except a few tests where it
probably doesn't matter) use is O_CLOEXEC, so set that unconditionally.
This parser will also be used in libinput, which uses the MIT license, so
relicense this file to the more permissive license to make bidirectional code
flow easier. parse_hwdb.py is only useful during building of the project, and
is not part of the installation, so effectively both licenses are very similar.
In particular, the licensing of binary packages produced by systemd is not
influenced in any way, because the MIT licensed part is not installed.
Like many other recent thinkpads the factory default pointingstick
sensitivity on these devices is quite low, making the pointingstick
very slow in moving the cursor.
This extends the existing hwdb rules for tweaking the sensitivity to
also apply to the X1 Tablet models.
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
When root was empty or equal to "/", chroot_symlinks_same was called with
root==NULL, and strjoina returned "", so the code thought both paths are equal
even if they were not. Fix that by always providing a non-null first argument
to strjoina.
Michael Olbrich [Fri, 9 Sep 2016 15:05:06 +0000 (17:05 +0200)]
unit: sent change signal before removing the unit if necessary (#4106)
If the unit is in the dbus queue when it is removed then the last change
signal is never sent. Fix this by checking the dbus queue and explicitly
send the change signal before sending the remove signal.
Felipe Sateler [Wed, 31 Aug 2016 13:00:35 +0000 (10:00 -0300)]
seccomp: also detect if seccomp filtering is enabled
In https://github.com/systemd/systemd/pull/4004 , a runtime detection
method for seccomp was added. However, it does not detect the case
where CONFIG_SECCOMP=y but CONFIG_SECCOMP_FILTER=n. This is possible
if the architecture does not support filtering yet.
Add a check for that case too.
While at it, change get_proc_field usage to use PR_GET_SECCOMP prctl,
as that should save a few system calls and (unnecessary) allocations.
Previously, reading of /proc/self/stat was done as recommended by
prctl(2) as safer. However, given that we need to do the prctl call
anyway, lets skip opening, reading and parsing the file.
Code for checking inspired by
https://outflux.net/teach-seccomp/autodetect.html
also fix valgrind warning
```
Unloaded link configuration context.
==31690==
==31690== HEAP SUMMARY:
==31690== in use at exit: 8,192 bytes in 2 blocks
==31690== total heap usage: 431 allocs, 429 frees, 321,164 bytes allocated
==31690==
==31690== 4,096 bytes in 1 blocks are still reachable in loss record 1 of 2
==31690== at 0x4C2BBAD: malloc (vg_replace_malloc.c:299)
==31690== by 0x166B32: mempool_alloc_tile (mempool.c:62)
==31690== by 0x166BBC: mempool_alloc0_tile (mempool.c:81)
==31690== by 0x15B8FC: hashmap_base_new (hashmap.c:732)
==31690== by 0x15B9F7: internal_hashmap_new (hashmap.c:766)
==31690== by 0x151291: conf_files_list_strv_internal (conf-files.c:103)
==31690== by 0x1514BA: conf_files_list_strv (conf-files.c:135)
==31690== by 0x13A1CF: link_config_load (link-config.c:227)
==31690== by 0x135B68: builtin_net_setup_link_init
(udev-builtin-net_setup_link.c:77)
==31690== by 0x1306B3: udev_builtin_init (udev-builtin.c:57)
==31690== by 0x11E984: adm_builtin (udevadm-test-builtin.c:72)
==31690== by 0x117B4D: run_command (udevadm.c:75)
```
Fixes #4080
systemctl: usable status command for special units (#4072)
Prior to this commit, users could be given an unusable command to run if
they attempted to stop or start special services. For example:
$ systemctl stop -- -.mount
Failed to stop -.mount: Operation refused, unit -.mount may be \
requested by dependency only.
See system logs and 'systemctl status -.mount' for details.
$ systemctl status -.mount
systemctl: invalid option -- '.'
This adds a '--' to the example command in these situations.
machinectl: split OS field in two; print ip addresses (#4058)
This splits the OS field in two : one for the distribution name
and one for the the version id.
Dashes are written for missing fields.
This also prints ip addresses of known machines. The `--max-addresses`
option specifies how much ip addresses we want to see. The default is 1.
When more than one address is written for a machine, a `,` follows it.
If there are more ips than `--max-addresses`, `...` follows the last
address.
Yann E. MORIN [Sun, 28 Aug 2016 15:26:42 +0000 (17:26 +0200)]
missing.h: add missing definitions for __O_TMPFILE
Currently, a missing __O_TMPFILE was only defined for i386 and x86_64,
leaving any other architectures with an "old" toolchain fail miserably
at build time:
src/import/export-raw.c: In function 'reflink_snapshot':
src/import/export-raw.c:271:26: error: 'O_TMPFILE' undeclared (first use in this function)
new_fd = open(d, O_TMPFILE|O_CLOEXEC|O_NOCTTY|O_RDWR, 0600);
^
__O_TMPFILE (and O_TMPFILE) are available since glibc 2.19. However, a
lot of existing toolchains are still using glibc-2.18, and some even
before that, and it is not really possible to update those toolchains.
Instead of defining it only for i386 and x86_64, define __O_TMPFILE
with the specific values for those archs where it is different from the
generic value. Use the values as found in the Linux kernel (v4.8-rc3,
current as of time of commit).
---
Note: tested on ARM (build+run), with glibc-2.18 and linux headers 3.12.
Untested on other archs, though (I have no board to test this).
Changes v1 -> v2:
- add a comment specifying some are hexa, others are octal.
Luca Bruno [Thu, 25 Aug 2016 22:08:26 +0000 (22:08 +0000)]
nspawn: split down SYSTEMD_NSPAWN_SHARE_SYSTEM (#4023)
This commit follows further on the deprecation path for --share-system,
by splitting and gating each share-able namespace behind its own
environment flag.
Michal Sekletar [Thu, 25 Aug 2016 22:07:58 +0000 (00:07 +0200)]
units: remove udev control socket when systemd stops the socket unit (#4039)
Mere presence of the socket in the filesystem makes
udev_queue_get_udev_is_active() return that udev is running. Note that,
udev on exit doesn't unlink control socket nor does systemd. Thus socket
stays around even when both daemon and socket are stopped. This causes
problems for cryptsetup because when it detects running udev it launches
synchronous operations that *really* require udev. This in turn may
cause blocking and subsequent timeout in systemd-cryptsetup on reboot
while machine is in a state that udev and its control socket units are
stopped, e.g. emergency mode.
Vito Caputo [Thu, 25 Aug 2016 15:37:57 +0000 (08:37 -0700)]
journal: implicitly flush to var on recovery (#4028)
When the system journal becomes re-opened post-flush with the runtime
journal open, it implies we've recovered from something like an ENOSPC
situation where the system journal rotate had failed, leaving the system
journal closed, causing the runtime journal to be opened post-flush.
For the duration of the unavailable system journal, we log to the
runtime journal. But when the system journal gets opened (space made
available, for example), we need to close the runtime journal before new
journal writes will go to the system journal. Calling
server_flush_to_var() after opening the system journal with a runtime
journal present, post-flush, achieves this while preserving the runtime
journal's contents in the system journal.
The combination of the present flushed flag file and the runtime journal
being open is a state where we should be logging to the system journal,
so it's appropriate to resume doing so once we've successfully opened
the system journal.
bus-util: turn on exit-on-disconnect for all command line tools
bus_connect_transport() is exclusively used from our command line tools, hence
let's set exit-on-disconnect for all of them, making behaviour a bit nicer in
case dbus-daemon goes down.
sd-bus: optionally, exit process or event loop on disconnect
Old libdbus has a feature that the process is terminated whenever the the bus
connection receives a disconnect. This is pretty useful on desktop apps (where
a disconnect indicates session termination), as well as on command line apps
(where we really shouldn't stay hanging in most cases if dbus daemon goes
down).
Add a similar feature to sd-bus, but make it opt-in rather than opt-out, like
it is on libdbus. Also, if the bus is attached to an event loop just exit the
event loop rather than the the whole process.
sd-bus: when the server-side disconnects, make sure to dispatch all tracking objects immediately
If the server side kicks us from the bus, from our view no names are on the bus
anymore, hence let's make sure to dispatch all tracking objects immediately.
sd-bus: ensure we don't dispatch track objects while we are adding names to them
In order to add a name to a bus tracking object we need to do some bus
operations: we need to check if the name already exists and add match for it.
Both are synchronous bus calls. While processing those we need to make sure
that the tracking object is not dispatched yet, as it might still be empty, but
is not going to be empty for very long.
hence, block dispatching by removing the object from the dispatch queue while
adding it, and readding it on error.
core: cache last CPU usage counter, before destorying a cgroup
It is useful for clients to be able to read the last CPU usage counter value of
a unit even if the unit is already terminated. Hence, before destroying a
cgroup's cgroup cache the last CPU usage counter and return it if the cgroup is
gone.
bus-util: support mapping signed integers with bus_map_properties()
Let's make sure we can read the exit code/status properties exposed by PID 1
properly. Let's reuse the existing code for unsigned fields, as we just use it
to copy words around, and don't calculate it.
This adds two (privileged) bus calls Ref() and Unref() to the Unit interface.
The two calls may be used by clients to pin a unit into memory, so that various
runtime properties aren't flushed out by the automatic GC. This is necessary
to permit clients to race-freely acquire runtime results (such as process exit
status/code or accumulated CPU time) on successful service termination.
Ref() and Unref() are fully recursive, hence act like the usual reference
counting concept in C. Taking a reference is a privileged operation, as this
allows pinning units into memory which consumes resources.
Transient units may also gain a reference at the time of creation, via the new
AddRef property (that is only defined for transient units at the time of
creation).
projects / thirdparty / systemd.git / log
