Michael Marley [Sun, 26 Jul 2020 03:23:48 +0000 (23:23 -0400)]
network: radv: Send RA on newly-added dynamic prefix
When a prefix is delegated to an interface that is already sending
RAs, send an RA immediately to inform clients of the new prefix.
This allows them to start using it immediately instead of waiting
up to nearly 10 minutes (depending on when the last timed RA was
sent). This type of situation might occur if, for example, an
outage of the WAN connection caused the addresses and prefixes to
be lost and later regained after service was restored. The
condition for the number of RAs sent being above 0 simultaneously
ensures that RADV is already running and that this code doesn't
send any RAs before the timed RAs have started when the interface
first comes up.
../src/network/test-networkd-conf.c:104:56: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int]
test_config_parse_duid_rawdata_one(BYTES_0_128 + 2, 0, &(DUID){0, 128, BYTES_1_128});
~~~~~~~~~~~~^~~
../src/network/test-networkd-conf.c:104:56: note: use array indexing to silence this warning
test_config_parse_duid_rawdata_one(BYTES_0_128 + 2, 0, &(DUID){0, 128, BYTES_1_128});
^
& [ ]
1 warning generated.
../src/test/test-clock.c:52:17: warning: ignoring return value of function declared with 'warn_unused_result' attribute [-Wunused-result]
ftruncate(fileno(f), 0);
^~~~~~~~~ ~~~~~~~~~~~~
1 warning generated.
Axel Rasmussen [Thu, 23 Jul 2020 17:54:23 +0000 (10:54 -0700)]
selinux: handle getcon_raw producing a NULL pointer, despite returning 0
Previously, we assumed that success meant we definitely got a valid
pointer. There is at least one edge case where this is not true (i.e.,
we can get both a 0 return value, and *also* a NULL pointer):
https://github.com/SELinuxProject/selinux/blob/4246bb550dee5246c8567804325b7da206cd76cf/libselinux/src/procattr.c#L175
When this case occurrs, if we don't check the pointer we SIGSEGV in
early initialization.
Let's find the right os-release file on the host side, and only mount
the one that matters, i.e. /etc/os-release if it exists and
/usr/lib/os-release otherwise. Use the fixed path /run/host/os-release
for that.
Let's also mount /run/host as a bind mount on itself before we set up
/run/host, and let's mount it MS_RDONLY after we are done, so that it
remains immutable as a whole.
It needs to be world readable (unlike /etc/shadow) when created anew.
This fixes systems that boot with "systemd-nspawn --volatile=yes", i.e.
come up with an entirely empty /etc/ and thus no existing /etc/passwd
file when firstboot runs.
nspawn: fix MS_SHARED mount propagation for userns containers
We want our OS trees to be MS_SHARED by default, so that our service
namespacing logic can work correctly. Thus in nspawn we mount everything
MS_SHARED when organizing our tree. We do this early on, before changing
the user namespace (if that's requested). However CLONE_NEWUSER actually
resets MS_SHARED to MS_SLAVE for all mounts (so that less privileged
environments can't affect the more privileged ones). Hence, when
invoking it we have to reset things to MS_SHARED afterwards again. This
won't reestablish propagation, but it will make sure we get a new set of
mount peer groups everywhere that then are honoured for the mount
namespaces/propagated mounts set up inside the container further down.
[zjs: Looking at https://packages.ubuntu.com/bionic/iptables-dev, iptables-dev
was a transitional package that was pulling in libxtables-dev, libip4tc-dev,
and libip6tc-dev (as listed by @GiedriusS). iptables-dev is gone in focal, so
replace it by the expanded list.]
test-ordered-set: add a case where we get 0 for duplicate entries
This API is a complete mess. We forgot to do a hashed comparison for duplicate
entries and we use a direct pointer comparison. For trivial_hash_ops the result
is the same. For all other case, it's not. Fixing this properly will require
auditing all the uses of set_put() and ordered_set_put(). For now, let's just
acknowledge the breakage.
semaphoreci was failing with:
Can't exec "tree": No such file or directory at /tmp/autopkgtest-lxc.v9oand4g/downtmp/build.TIm/src/test/udev-test.pl line 1752.
Get SOURCE_EPOCH from the latest git tag instead of NEWS
Currently, each change to NEWS triggers a meson reconfigure that
changes SOURCE_EPOCH which causes a full rebuild. Since NEWS changes
relatively often, we have a full rebuild each time we pull from
master even if we pull semi-regularly. This is further compounded
when using branches since NEWS has a relatively high chance to
differ between branches which causes git to update the modification
time, leading to a full rebuild when switching between branches.
We fix this by using the creation time of the latest git tag instead.
There are a lot of edge cases that the current implementation
doesn't handle, especially in cases where one of passwd/shadow
exists and the other doesn't exist. For example, if
--root-password is specified, we will write /etc/shadow but
won't add a root entry to /etc/passwd if there is none.
To fix some of these issues, we constrain systemd-firstboot to
only modify /etc/passwd and /etc/shadow if both do not exist
already (or --force) is specified. On top of that, we calculate
all necessary information for both passwd and shadow upfront so
we can take it all into account when writing the actual files.
If no root password options are given --force is specified or both
files do not exist, we lock the root account for security purposes.
c80a9a33d04fb4381327a69ce929c94a9f1d0e6c introduced the .can_fail field,
but didn't set it on .targets. Targets can fail through dependencies.
This leaves .slice and .device units as the types that cannot fail.
The removal was done as a reaction to the messages from systemd:
initrd-root-fs.target: Requested dependency OnFailure=emergency.target ignored (target units cannot fail).
initrd.target: Requested dependency OnFailure=emergency.target ignored (target units cannot fail).
initrd-root-device.target: Requested dependency OnFailure=emergency.target ignored (target units cannot fail).
initrd-fs.target: Requested dependency OnFailure=emergency.target ignored (target units cannot fail).
local-fs.target: Requested dependency OnFailure=emergency.target ignored (target units cannot fail).
...
But it seems that the messages themselves are wrong, and the units were OK.
network: ndisc: do not store duplicated data in Set
The Address objects in the set generated by ndisc_router_generate_addresses()
have the equivalent prefixlen, flags, prefered lifetime.
This commit makes ndisc_router_generate_addresses() return Set of
in6_addr.
The CI occasionally fail in test-path with a timeout. test-path loads
units from the filesystem, and this conceivably might take more than
the default limit of 3 s. Increase the timeout substantially to see if
this helps.
From https://github.com/systemd/systemd/pull/16503#issuecomment-660212813:
systemd-vconsole-setup (the binary) is supposed to run asynchronously by udev
therefore ordering early interactive services after systemd-vconsole-setup.service
has basically no effect.
Let's remove this paragraph. It's better to say nothing than to give pointless
advice.
verity: re-use already open devices if the hashes match
Opening a verity device is an expensive operation. The kernelspace operations
are mostly sequential with a global lock held regardless of which device
is being opened. In userspace jumps in and out of multiple libraries are
required. When signatures are used, there's the additional cryptographic
checks.
We know when two devices are identical: they have the same root hash.
If libcrypsetup returns EEXIST, double check that the hashes are really
the same, and that either both or none have a signature, and if everything
matches simply remount the already open device. The kernel will do
reference counting for us.
In order to quickly and reliably discover if a device is already open,
change the node naming scheme from '/dev/mapper/major:minor-verity' to
'/dev/mapper/$roothash-verity'.
Unfortunately libdevmapper is not 100% reliable, so in some case it
will say that the device already exists and it is active, but in
reality it is not usable. Fallback to an individually-activated
unique device name in those cases for robustness.
../src/home/homectl-pkcs11.c:19:13: warning: ‘pkcs11_callback_data_release’ defined but not used [-Wunused-function]
19 | static void pkcs11_callback_data_release(struct pkcs11_callback_data *data) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
The docs for XZ don't seem to answer this at first blush, or maybe
I'm looking in the wrong place... This might make XZ less terribly slow,
but on the other hand, almost nobody uses it, so it doesn't matter that
much.
journal/compress: fix zstd decompression with capped output size
decompress_blob_zstd() would allocate ever bigger buffers in a loop trying to
get a buffer big enough to decompress the input data. This is wasteful, since
we can just query the size of the decompressed data from the compressed header.
Worse, it doesn't work when the output size is capped, i.e. when dst_max != 0.
If the decompressed blob happened to be bigger than dst_max, decompression
would fail with -ENOBUFS. We need to use "stream decompression" instead, and
only get min(uncompressed size, dst_max) bytes of output.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1856037 in a second way.
sd-journal: when enumerating, continue even after an inaccessible field
SD_JOURNAL_FOREACH_DATA() and SD_JOURNAL_FOREACH_UNIQUE() would immediately
terminate when a field couldn't be accessed. This can happen for example when a
field is compressed with an unavailable compression format. But it's likely
that this is the wrong thing to do: the caller for example might want to
iterate over the fields but isn't interested in all of them. coredumpctl is
like this: it uses SD_JOURNAL_FOREACH_DATA() but only uses a subset of the
fields.
Add two new functions sd_journal_enumerate_good_data() and
sd_journal_enumerate_good_unique() that retry sd_journal_enumerate_data() and
sd_journal_enumerate_unique() if the return value is something that applies to
a single field: ENOBUS, E2BIG, EOPNOTSUPP.
An alternative would be to make the macros themselves smarter instead of adding
new symbols, and do the looping internally in the macro. I don't like that
approach for two reasons. First, it would embed the logic in the macro, so
recompilation would be required if we decide to update the logic. With the
current version of the patch, recompilation is required to use the new symbols,
but after that, library upgrades are enough. So the current approach is safer
in case further updates are needed. Second, our headers use primitive C, and it
is hard to do the macros without using newer features.
tree-wide: use READ_FULL_FILE_CONNECT_SOCKET at various places
Let's use the new flag wherever we read key material/passphrases/hashes
off disk, so that people can plug in their own IPC service as backend if
they like, easily.
(My main goal was actually to support this for crypttab key files — i.e.
that you can specify AF_UNIX sockets as third column in crypttab — but
that's harder to implement, since the keys are read via libcryptsetup's
API, not ours.)
Hans de Goede [Mon, 20 Jul 2020 13:06:43 +0000 (15:06 +0200)]
logind: Fix org.freedesktop.login1.set-reboot-to-boot-loader-menu saving to the wrong file in the non EFI case
According to the docs, and to the
org.freedesktop.login1.get-reboot-to-boot-loader-menu code, the
(oneshot) boot-loader-menu timeout should be stored in
/run/systemd/reboot-to-boot-loader-menu, but the set method was storing it
in /run/systemd/reboot-to-loader-menu.
This commit fixes this. Note that the fixed name also is a better match
for the dbus call names and matches the related
/run/systemd/reboot-to-boot-loader-entry structure, so fixing the set code,
rather then the get code + docs seems like the right thing to do here.
projects / thirdparty / systemd.git / log
