travis: stop using the official upstream-systemd-ci repository
Turns out the key for the repository hasn't been propagated properly
so let's restore the kludge that was removed in https://github.com/systemd/systemd/pull/11582.
Of course it's ugly but at least it works.
The issue was kind of reported to the maintainers of the repository
in https://github.com/systemd/systemd/pull/11531#issuecomment-460023474.
YmrDtnJu [Fri, 1 Feb 2019 10:38:35 +0000 (11:38 +0100)]
shared: Revert commit 49fe5c099 in parts for function parse_acl.
Too much code has been removed while replacing startswith with STARTSWITH_SET
so that every ACL specified e.g. in tmpfiles.d was parsed as a default ACL.
Taro Yamada [Sat, 2 Feb 2019 04:05:42 +0000 (13:05 +0900)]
test: (ArchLinux) Replace initramfs-linux.img with initramfs-linux-fallback.img.
Currently /boot/initramfs-linux.img is used as the default initrd for ArchLinux.
Although, since the kernel modules that are not necessary for the host environment are removed from
initramfs-linux.img by mkinitcpio 's autodetect hook, the kernel modules necessary for qemu may be missing.
(ata_piix, ext4, and so on in my case.)
As a result, the test environment may not be built properly and the test will be failed.
initramfs-linux-fallback.img will skip this autodetect hook, so the test will run successfully in more
environments.
Both initramfs-linux.img and initramfs-linux-fallback.img are generated by default.
travis: switch to the "official" systemd-ci repository
Now that add-apt-repository hasn't failed for almost two days on Semaphore
it should be safe to assume that the key has been propagated properly
and the repository is ready to be used on Travis CI.
Commit a8cb1dc3e0fa81aff made sure that initrd-cleanup.service won't be stopped
when initrd-switch-root.target is isolated.
However even with this change, it might happen that initrd-cleanup.service
survives the switch to rootfs (since it has no ordering constraints against
initrd-switch-root.target) and is stopped right after when default.target is
isolated. This led to initrd-cleanup.service entering in failed state as it
happens when oneshot services are stopped.
* kernel-install: fix initrd when called as installkernel
Running make install from the kernel runs e.g.:
installkernel 4.20.5 arch/x86/boot/bzImage System.map "/boot"
Since 0912c0b80eb24fb9a4e1cc4abf274a1358b9943d this would
cal 90-loaderentry.install with those arguments:
add 4.20.5 /boot/... arch/x86/boot/bzImage System.map "/boot"
The two last arguments would then be handled as the initrd files.
As System.map exists in current directory but not in /boot/...
it would get copied there, and used as initrd intead of the initrd
which has been generated by dracut.
With this change, nothing changes when kernel-install is called
directly, but when it's called as installkernel, we now pass
thos arguments to 90-loaderentry.install:
add 4.20.5 /boot/... arch/x86/boot/bzImage initrd
initrd is thus detected as the file to use for the initrd, and as it
exists, nothing is copied over and the initrd line generated is
consistent with what one would expect
* kernel-install: fix dracut initrd detection when called directly
This brings back the systemd 240 behaviour when called directly too
* kernel-install: unify initrd fallback
* kernel-install: move initrd fallback handling to 90-loaderentry.install
* kernel-install: move initrd fallback just before creating loader entry
alloc-util: whenever any of our alloca() wrappers is used to allocate overly large memory blocks, hit an assert()
Of course, this should never happen, but let's better be safe than
sorry, and abort rather than continue when a too large memory block is
allocated, simply asa safety precaution.
An early abort is better than continuing with a likely memory corruption
later.
pid1: fix cleanup of stale implicit deps based on /proc/self/mountinfo
The problem was introduced in a37422045fbb68ad68f734e5dc00e0a5b1759773:
we have a unit which has a fragment, and when we'd update it based on
/proc/self/mountinfo, we'd say that e.g. What=/dev/loop8 has origin-fragment.
This commit changes two things:
- origin-fragment is changed to origin-mountinfo-implicit
- when we stop a unit, mountinfo information is flushed and all deps based
on it are dropped.
The second step is important, because when we restart the unit, we want to
notice that we have "fresh" mountinfo information. We could keep the old info
around and solve this in a different way, but keeping stale information seems
inelegant.
units: drop conditionalization of systemd-tmpfiles-setup-dev.service
Currently, tmpfiles runs in two separate services at boot. /dev is
populated by systemd-tmpfiles-setup-dev.service and everything else by
systemd-tmpfiles-setup.service. The former was so far conditionalized by
CAP_SYS_MODULES. The reasoning was that the primary purpose of
populating /dev was to create device nodes based on the static device
node info exported in kernel modules through MODALIAS. And without the
privs to load kernel modules doing so is unnecessary. That thinking is
incomplete however, as there might be reason to create stuff in /dev
outside of the static modalias usecase. Thus, let's drop the
conditionalization to ensure that tmpfiles.d rules are always executed
at least once under all conditions.
journald: periodically drop cache for all dead PIDs
In normal use, this allow us to drop dead entries from the cache and reduces
the cache size so that we don't evict entries unnecessarily. The time limit is
there mostly to serve as a guard against malicious logging from many different
PIDs.
journal: limit the number of entries in the cache based on available memory
This is far from perfect, but should give mostly reasonable values. My
assumption is that if somebody has a few hundred MB of memory, they are
unlikely to have thousands of processes logging. A hundred would already be a
lot. So let's scale the cache size propritionally to the total memory size,
with clamping on both ends.
The formula gives 64 cache entries for each GB of RAM.
cryptsetup: rework how we log about activation failures
First of all let's always log where the errors happen, and not in an
upper stackframe, in all cases. Previously we'd do this somethis one way
and sometimes another, which resulted in sometimes duplicate logging and
sometimes none.
When we cannot activate something due to bad password the kernel gives
us EPERM. Let's uniformly return this EAGAIN, so tha the next password
is tried. (previously this was done in most cases but not in all)
When we get EPERM let's also explicitly indicate that this probably
means the password is simply wrong.
The badge is currently serving a broken image, since Coverity Scan is currently
having an outage. See Issue #11185 for more details. We can restore the badge
by reverting this commit once their service is up again.
procfs-util: expose functionality to query total memory
procfs_memory_get_current is renamed to procfs_memory_get_used, because
"current" can mean anything, including total memory, used memory, and free
memory, as long as the value is up to date.
Looks to be additions and corrections again. It seems somebody removed
some whitespace in variuos places by mistake, let's hope this gets corrected
upstream. Doing such corrections downstream is not worth the trouble.
Yu Watanabe [Tue, 22 Jan 2019 02:45:40 +0000 (11:45 +0900)]
sd-device: do not save e.g., DEVPATH or INTERFACE properties to udev database
Previously, device_copy_properties() copies all properties to both
sd_device::properties and ::properties_db. Thus, on move uevent,
also tentative properties, e.g. DEVPATH or INTERFACE, are stored to
::properties_db, and saved to udev database.
This makes such tentative properties be copied to only ::properties,
and thus not saved to udev database.
Yu Watanabe [Fri, 18 Jan 2019 03:55:15 +0000 (12:55 +0900)]
network: unset Network::manager when loading .network file fails
Otherwise, LIST_REMOVE() in network_free() fails.
This fixes the following assertion:
```
systemd-networkd[2595]: Bus bus-api-network: changing state UNSET → OPENING
systemd-networkd[2595]: Bus bus-api-network: changing state OPENING → AUTHENTICATING
systemd-networkd[2595]: timestamp of '/etc/systemd/network' changed
systemd-networkd[2595]: /etc/systemd/network/10-hoge.network:1: Invalid section header '[Network]Address=192.168.0.1'
systemd-networkd[2595]: /etc/systemd/network/10-hoge.network:1: Failed to parse file: Bad message
systemd-networkd[2595]: Assertion '*_head == _item' failed at ../../home/watanabe/git/systemd/src/network/networkd-network.c:378, function network_free(). Aborting.
valgrind[2595]: ==2595==
valgrind[2595]: ==2595== Process terminating with default action of signal 6 (SIGABRT): dumping core
valgrind[2595]: ==2595== at 0x4BCA53F: raise (in /usr/lib64/libc-2.28.so)
valgrind[2595]: ==2595== by 0x4BB4894: abort (in /usr/lib64/libc-2.28.so)
valgrind[2595]: ==2595== by 0x4955F09: log_assert_failed_realm (log.c:795)
valgrind[2595]: ==2595== by 0x417101: network_free (networkd-network.c:378)
valgrind[2595]: ==2595== by 0x415E99: network_freep (networkd-network.h:282)
valgrind[2595]: ==2595== by 0x416AB2: network_load_one (networkd-network.c:101)
valgrind[2595]: ==2595== by 0x416C39: network_load (networkd-network.c:293)
valgrind[2595]: ==2595== by 0x414031: manager_load_config (networkd-manager.c:1502)
valgrind[2595]: ==2595== by 0x40B258: run (networkd.c:82)
valgrind[2595]: ==2595== by 0x40B74A: main (networkd.c:117)
valgrind[2595]: ==2595==
valgrind[2595]: ==2595== HEAP SUMMARY:
valgrind[2595]: ==2595== in use at exit: 32,621 bytes in 201 blocks
valgrind[2595]: ==2595== total heap usage: 746 allocs, 545 frees, 241,027 bytes allocated
valgrind[2595]: ==2595==
valgrind[2595]: ==2595== LEAK SUMMARY:
valgrind[2595]: ==2595== definitely lost: 0 bytes in 0 blocks
valgrind[2595]: ==2595== indirectly lost: 0 bytes in 0 blocks
valgrind[2595]: ==2595== possibly lost: 0 bytes in 0 blocks
valgrind[2595]: ==2595== still reachable: 32,621 bytes in 201 blocks
valgrind[2595]: ==2595== suppressed: 0 bytes in 0 blocks
valgrind[2595]: ==2595== Reachable blocks (those to which a pointer was found) are not shown.
valgrind[2595]: ==2595== To see them, rerun with: --leak-check=full --show-leak-kinds=all
valgrind[2595]: ==2595==
valgrind[2595]: ==2595== For counts of detected and suppressed errors, rerun with: -v
valgrind[2595]: ==2595== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 0 from 0)
systemd-coredump[2600]: Process 2595 (memcheck-amd64-) of user 192 dumped core.
```
Frantisek Sumsal [Fri, 18 Jan 2019 19:49:29 +0000 (20:49 +0100)]
test: mark plymouth as optional dependency
rescue.service pulls in /bin/plymouth, which doesn't exist on some
distributions (e.g. Arch Linux). Let's mark it as optional, as it's not
even required by the referencing unit and causes unwanted fails in the
integration testsuite.
projects / thirdparty / systemd.git / log
