Martin Wilck [Tue, 24 Apr 2018 16:08:18 +0000 (18:08 +0200)]
test/udev-test.pl: last_rule is unsupported
the "last_rule" option hasn't been supported for some time.
Therefore this test fails if a "not_exp_links" attribute is added,
as it should be. Mark it appropriately.
Martin Wilck [Tue, 24 Apr 2018 08:50:24 +0000 (10:50 +0200)]
test/udev-test.pl: test correctness of symlink targets
Test if symlinks are created correctly by comparing the symlink
targets to the devnode path. This implies (for the symlink) that
major/minor numbers and permissions are correct, as we have tested
that on the devnode already.
Martin Wilck [Mon, 23 Apr 2018 19:59:05 +0000 (21:59 +0200)]
test/udev-test.pl: allow concurrent additions and removals
Allow testing cases where multiple devices are added and removed
simultaneously. Tests are started as synchronously as possible using a
semaphore, in order to test possible race conditions. If this isn't desired,
the test parameter "sleep_us" can be set to the number of microseconds to wait
between udev invocations.
Martin Wilck [Fri, 20 Apr 2018 20:38:30 +0000 (22:38 +0200)]
test/udev-test.pl: allow multiple devices per test
Allow testing cases where multiple devices are added and removed.
This implies a change of the data structure: every test allows
for multiple devices to be added, and "exp_name" etc. are now properties
of the device, not of the test.
Yu, Li-Yu [Tue, 20 Oct 2020 16:38:21 +0000 (00:38 +0800)]
udev: escaped string syntax e"..." in rule files
* Existing valid rule files written with KEY="value" are not affected
* Now, KEY=e"value\n" becomes valid. Where `\n` is a newline character
* Escape sequences supported by src/basic/escape.h:cunescape() is
supported
headers: use custom LicenseRef- spdx tag for various "public domain" files
There is no spdx tag defined for those versions of "public domain", but we can
add a custom tag, see
https://spdx.github.io/spdx-spec/6-other-licensing-information-detected/.
headers: add spdx tags to imported files with a known license
I added the header in the cases where the license text is present and it is
easy to find the appropriate SPDX header.
For "public domain" stuff: SDPX treats each "public domain" license as unique [1],
but luckily the one in siphash24.c is one of the identified variants. There are
some other cases which specify "public domain" but there doesn't seem to be a
SPDX identifier.
With these patches applied, networkd is successfully able to get an
address from a DHCP server on an IPoIB interface.
1)
Makes networkd pass the actual interface type to the dhcp client,
instead of hardcoding it to Ethernet.
2)
Fixes some issues in handling the larger (20 Byte) IB MAC addresses in
the dhcp code.
3)
Add a new field to networkds Link struct, which holds the interface
broadcast address.
3.1)
Modify the DHCP code to also expect the broadcast address as parameter.
On an Ethernet-Interface the Broadcast address never changes and is always
all 6 bytes set to 0xFF.
On an IB one however it is not neccesarily always the same, thus
fetching the actual address from the interface is neccesary.
4)
Only the last 8 bytes of an IB MAC are stable, so when using an IB MAC to
generate a client ID, only pass those 8 bytes.
network: store full hardware address in Link struct
This passes the legacy ethernet address to functions in a lot of places,
which all will need migrated to handle arbitrary size hardware addresses
eventually.
Hardware addresses come in various shapes and sizes, these new functions
and accomapying data structures account for that instead of hard-coding
a hardware address to the 6 bytes of an ethernet MAC.
Ideally, we'd read back what we wrote, but that would have been
much more complicated. But just writing stuff is useful to test under
valgrind or manually.
journal,homectl: unify implementations of libqrencode loading and fss key printing
We had two of each: both homectl and journalctl had the whole dlopen()
wrapper, and journalctl had two implementations (slightly different) of the
code to print the fss:// pattern.
print_qrcode() now returns -EOPNOTSUPP when compiled with qrcode support. Both
callers ignore the return value, so this changes nothing.
To make things simple and robust when debugging journald, we'll leave
the SO_TIMESTAMP invocations in the C code in place, even if they are
now typically redundant, given that the sockets are already passed into
the process with SO_TIMESTAMP turned on now.
Let's not have #ifdeffery both in the consumers and the providers of the
selinux glue code. Unless the code is particularly complex, let's do the
ifdeffery only in the provider of the selinux glue code, and let's keep
the consumers simple and just invoke it.
sd-event: split out enable and disable codepaths from sd_event_source_set_enabled()
So far half of sd_event_source_set_enabled() was doing enabling, the
other half was doing disabling. Let's split that into two separate
calls.
(This also adds a new shortcut to sd_event_source_set_enabled(): if the
caller toggles between "ON" and "ONESHOT" we'll now shortcut this, since
the event source is already enabled in that case and shall remain
enabled.)
This heavily borrows and is inspired from Michal Sekletár's #17284
refactoring.
Michal Sekletár [Fri, 23 Oct 2020 16:29:27 +0000 (18:29 +0200)]
sd-event: split out helper functions for reshuffling prioqs
We typically don't just reshuffle a single prioq at once, but always
two. Let's add two helper functions that do this, and reuse them
everywhere.
(Note that this drops one minor optimization:
sd_event_source_set_time_accuracy() previously only reshuffled the
"latest" prioq, since changing the accuracy has no effect on the
earliest time of an event source, just the latest time an event source
can run. This optimization is removed to simplify things, given that
it's not really worth the effort as prioq_reshuffle() on properly
ordered prioqs has practically zero cost O(1)).
(Slightly generalized, commented and split out of #17284 by Lennart)
Jonathan Lebon [Tue, 27 Oct 2020 12:29:38 +0000 (13:29 +0100)]
units: unconditionally pull in remote-cryptsetup.target in the initramfs
[zjs: Replaces #17149.
I took half of the patch in
https://github.com/systemd/systemd/pull/17149#issuecomment-698399194,
hence I'm keeping Jonathan's authorship.
The original reasoning for 6c5496c492a8d74e54d22bf8824160cab1e63c10 was that we
enable remote-cryptsetup.target via presets, and since presets are not used for
the initrd, we need a different target. But since parts of the unit and target
tree are shared between the initramfs and the main system, we can't just create
a separate target for the initramfs. All the targets that depend on this one
would need to be split also. That condition is true for initrd-fs.target, but
not for sysinit.target.
So let's instead just uncoditionally pull in remote-cryptsetup.target in the
initramfs. It should normally be empty, so there should be no impact on boots
that don't have units in the target.
Jonathan's patch used initrd-root-fs.target, this version instead uses
initrd-root-device.target. initrd-root-device.target is ordered before
sysroot.mount, which means that the decrypted devices will be available earlier
too.]
sysinit.target is shared between the initrd and the host system. Pulling in
initrd-cryptsetup.target into sysinit.target causes the following warning at
boot:
Oct 27 10:42:30 workstation-uefi systemd[1]: initrd-cryptsetup.target: Starting requested but asserts failed.
Oct 27 10:42:30 workstation-uefi systemd[1]: Assertion failed for initrd-cryptsetup.target.
Anita Zhang [Fri, 23 Oct 2020 05:44:22 +0000 (22:44 -0700)]
core: clean up inactive/failed {service|scope}'s cgroups when the last process exits
If processes remain in the unit's cgroup after the final SIGKILL is
sent and the unit has exceeded stop timeout, don't release the unit's
cgroup information. Pid1 will have failed to `rmdir` the cgroup path due
to processes remaining in the cgroup and releasing would leave the cgroup
path on the file system with no tracking for pid1 to clean it up.
Instead, keep the information around until the last process exits and pid1
sends the cgroup empty notification. The service/scope can then prune
the cgroup if the unit is inactive/failed.
Dan Streetman [Fri, 23 Oct 2020 19:50:28 +0000 (15:50 -0400)]
test: ignore ENOMEDIUM error from sd_pid_get_cgroup()
Ubuntu builds on the Launchpad infrastructure run inside a chroot that does
not have the sysfs cgroup dirs mounted, so this call will return ENOMEDIUM
from cg_unified_cached() during the build-time testing, for example when
building the package in a Launchpad PPA.
The function `asynchronous_close()` confuses valgrind. Before this commit,
valgrind may report the following:
```
HEAP SUMMARY:
in use at exit: 384 bytes in 1 blocks
total heap usage: 4,787 allocs, 4,786 frees, 1,379,191 bytes allocated
384 bytes in 1 blocks are possibly lost in loss record 1 of 1
at 0x483CAE9: calloc (vg_replace_malloc.c:760)
by 0x401456A: _dl_allocate_tls (in /usr/lib64/ld-2.31.so)
by 0x4BD212E: pthread_create@@GLIBC_2.2.5 (in /usr/lib64/libpthread-2.31.so)
by 0x499B662: asynchronous_job (async.c:47)
by 0x499B7DC: asynchronous_close (async.c:102)
by 0x4CFA8B: client_initialize (sd-dhcp-client.c:696)
by 0x4CFC5E: client_stop (sd-dhcp-client.c:725)
by 0x4D4589: sd_dhcp_client_stop (sd-dhcp-client.c:2134)
by 0x493C2F: link_stop_clients (networkd-link.c:620)
by 0x4126DB: manager_free (networkd-manager.c:867)
by 0x40D193: manager_freep (networkd-manager.h:97)
by 0x40DAFC: run (networkd.c:20)
LEAK SUMMARY:
definitely lost: 0 bytes in 0 blocks
indirectly lost: 0 bytes in 0 blocks
possibly lost: 384 bytes in 1 blocks
still reachable: 0 bytes in 0 blocks
suppressed: 0 bytes in 0 blocks
For lists of detected and suppressed errors, rerun with: -s
ERROR SUMMARY: 1 errors from 1 contexts (suppressed: 0 from 0)
```
I think the idea was generally sound, but didn't take into account the
limitations of show-environment and how it is used. People expect to be able to
eval systemctl show-environment output in bash, and no escaping syntax is
defined for environment *names* (we only do escaping for *values*). We could
skip such problematic variables in 'systemctl show-environment', and only allow
them to be inherited directly. But this would be confusing and ugly.
The original motivation for this change was that various import operations
would fail. a4ccce22d9552dc74b6916cc5ec57f2a0b686b4f changed systemctl to filter
invalid variables in import-environment.
https://gitlab.gnome.org/GNOME/gnome-session/-/issues/71 does a similar change
in GNOME. So those problematic variables should not cause failures, but just
be silently ignored.
Finally, the environment block is becoming a dumping ground. In my gnome
session 'systemctl show-environment --user' includes stuff like PWD, FPATH
(from zsh), SHLVL=0 (no idea what that is). This is not directly related to
variable names (since all those are allowed under the stricter rules too), but
I think we should start pushing people away from running import-environment and
towards importing only select variables.
Benjamin Berg [Tue, 28 Jul 2020 17:12:56 +0000 (19:12 +0200)]
core: Move user units into app.slice by default
This changes the default from putting all units into the root slice to
placing them into the app slice in the user manager. The advantage is
that we get the right behaviour in most cases, and we'll need special
case handling in all other cases anyway.
Note that we have currently defined that applications *should* start
their unit names with app-, so we could also move only these by creating
a drop-in for app-.scope and app-.service.
However, that would not answer the question on how we should manage
session.slice. And we would end up placing anything that does not fit
the system (e.g. anything started by dbus-broker currently) into the
root slice.
projects / thirdparty / systemd.git / log
