configs: milkv_duo: Add SD card configs

[thirdparty/u-boot.git] / configs / mvebu_db_armada8k_defconfig

CONFIG_ARM=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_MVEBU=y
CONFIG_TEXT_BASE=0x00000000
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000
CONFIG_TARGET_MVEBU_ARMADA_8K=y
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x3f0000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_DEFAULT_DEVICE_TREE="armada-8040-db"
CONFIG_DEBUG_UART_BASE=0xf0512000
CONFIG_DEBUG_UART_CLOCK=200000000
CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_PCI=y
CONFIG_DEBUG_UART=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SYS_BOOTM_LEN=0x800000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_USE_PREBOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_MAXARGS=32
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_MAC_PARTITION=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ARP_TIMEOUT=200
CONFIG_NET_RETRY_COUNT=50
CONFIG_AHCI_MVEBU=y
CONFIG_LBA48=y
CONFIG_SYS_64BIT_LBA=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_MISC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_XENON=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_PHY_MARVELL=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
CONFIG_MVPP2=y
CONFIG_NVME_PCI=y
CONFIG_PCIE_DW_MVEBU=y
CONFIG_PHY=y
CONFIG_MVEBU_COMPHY_SUPPORT=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_ARMADA_8K=y
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_SYS_NS16550=y
CONFIG_KIRKWOOD_SPI=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_MCS7830=y
CONFIG_USB_ETHER_RTL8152=y
CONFIG_USB_ETHER_SMSC95XX=y