]>
Commit | Line | Data |
---|---|---|
668257e0 JJH |
1 | // SPDX-License-Identifier: GPL-2.0+ |
2 | /* | |
3 | * OMAP USB2 PHY LAYER | |
4 | * | |
5 | * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com | |
6 | * Written by Jean-Jacques Hiblot <jjhiblot@ti.com> | |
7 | */ | |
8 | ||
9 | #include <common.h> | |
10 | #include <asm/io.h> | |
11 | #include <dm.h> | |
12 | #include <errno.h> | |
13 | #include <generic-phy.h> | |
14 | #include <regmap.h> | |
15 | #include <syscon.h> | |
16 | ||
17 | #define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT BIT(0) | |
18 | ||
19 | #define OMAP_DEV_PHY_PD BIT(0) | |
20 | #define OMAP_USB2_PHY_PD BIT(28) | |
21 | ||
512a84c4 JJH |
22 | #define AM437X_USB2_PHY_PD BIT(0) |
23 | #define AM437X_USB2_OTG_PD BIT(1) | |
24 | #define AM437X_USB2_OTGVDET_EN BIT(19) | |
25 | #define AM437X_USB2_OTGSESSEND_EN BIT(20) | |
26 | ||
668257e0 JJH |
27 | #define USB2PHY_DISCON_BYP_LATCH BIT(31) |
28 | #define USB2PHY_ANA_CONFIG1 (0x4c) | |
29 | ||
30 | DECLARE_GLOBAL_DATA_PTR; | |
31 | ||
32 | struct omap_usb2_phy { | |
33 | struct regmap *pwr_regmap; | |
34 | ulong flags; | |
35 | void *phy_base; | |
36 | u32 pwr_reg_offset; | |
37 | }; | |
38 | ||
39 | struct usb_phy_data { | |
40 | const char *label; | |
41 | u8 flags; | |
42 | u32 mask; | |
43 | u32 power_on; | |
44 | u32 power_off; | |
45 | }; | |
46 | ||
47 | static const struct usb_phy_data omap5_usb2_data = { | |
48 | .label = "omap5_usb2", | |
49 | .flags = 0, | |
50 | .mask = OMAP_DEV_PHY_PD, | |
51 | .power_off = OMAP_DEV_PHY_PD, | |
52 | }; | |
53 | ||
54 | static const struct usb_phy_data dra7x_usb2_data = { | |
55 | .label = "dra7x_usb2", | |
56 | .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT, | |
57 | .mask = OMAP_DEV_PHY_PD, | |
58 | .power_off = OMAP_DEV_PHY_PD, | |
59 | }; | |
60 | ||
61 | static const struct usb_phy_data dra7x_usb2_phy2_data = { | |
62 | .label = "dra7x_usb2_phy2", | |
63 | .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT, | |
64 | .mask = OMAP_USB2_PHY_PD, | |
65 | .power_off = OMAP_USB2_PHY_PD, | |
66 | }; | |
67 | ||
512a84c4 JJH |
68 | static const struct usb_phy_data am437x_usb2_data = { |
69 | .label = "am437x_usb2", | |
70 | .flags = 0, | |
71 | .mask = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD | | |
72 | AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN, | |
73 | .power_on = AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN, | |
74 | .power_off = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD, | |
75 | }; | |
76 | ||
668257e0 JJH |
77 | static const struct udevice_id omap_usb2_id_table[] = { |
78 | { | |
79 | .compatible = "ti,omap5-usb2", | |
80 | .data = (ulong)&omap5_usb2_data, | |
81 | }, | |
82 | { | |
83 | .compatible = "ti,dra7x-usb2", | |
84 | .data = (ulong)&dra7x_usb2_data, | |
85 | }, | |
86 | { | |
87 | .compatible = "ti,dra7x-usb2-phy2", | |
88 | .data = (ulong)&dra7x_usb2_phy2_data, | |
89 | }, | |
512a84c4 JJH |
90 | { |
91 | .compatible = "ti,am437x-usb2", | |
92 | .data = (ulong)&am437x_usb2_data, | |
93 | }, | |
668257e0 JJH |
94 | {}, |
95 | }; | |
96 | ||
97 | static int omap_usb_phy_power(struct phy *usb_phy, bool on) | |
98 | { | |
99 | struct udevice *dev = usb_phy->dev; | |
100 | const struct usb_phy_data *data; | |
101 | const struct omap_usb2_phy *phy = dev_get_priv(dev); | |
102 | u32 val; | |
103 | int rc; | |
104 | ||
105 | data = (const struct usb_phy_data *)dev_get_driver_data(dev); | |
106 | if (!data) | |
107 | return -EINVAL; | |
108 | ||
109 | rc = regmap_read(phy->pwr_regmap, phy->pwr_reg_offset, &val); | |
110 | if (rc) | |
111 | return rc; | |
112 | val &= ~data->mask; | |
113 | if (on) | |
114 | val |= data->power_on; | |
115 | else | |
116 | val |= data->power_off; | |
117 | rc = regmap_write(phy->pwr_regmap, phy->pwr_reg_offset, val); | |
118 | if (rc) | |
119 | return rc; | |
120 | ||
121 | return 0; | |
122 | } | |
123 | ||
124 | static int omap_usb2_phy_init(struct phy *usb_phy) | |
125 | { | |
126 | struct udevice *dev = usb_phy->dev; | |
127 | struct omap_usb2_phy *priv = dev_get_priv(dev); | |
128 | u32 val; | |
129 | ||
130 | if (priv->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) { | |
131 | /* | |
132 | * | |
133 | * Reduce the sensitivity of internal PHY by enabling the | |
134 | * DISCON_BYP_LATCH of the USB2PHY_ANA_CONFIG1 register. This | |
135 | * resolves issues with certain devices which can otherwise | |
136 | * be prone to false disconnects. | |
137 | * | |
138 | */ | |
139 | val = readl(priv->phy_base + USB2PHY_ANA_CONFIG1); | |
140 | val |= USB2PHY_DISCON_BYP_LATCH; | |
141 | writel(val, priv->phy_base + USB2PHY_ANA_CONFIG1); | |
142 | } | |
143 | ||
144 | return 0; | |
145 | } | |
146 | ||
147 | static int omap_usb2_phy_power_on(struct phy *usb_phy) | |
148 | { | |
149 | return omap_usb_phy_power(usb_phy, true); | |
150 | } | |
151 | ||
152 | static int omap_usb2_phy_power_off(struct phy *usb_phy) | |
153 | { | |
154 | return omap_usb_phy_power(usb_phy, false); | |
155 | } | |
156 | ||
157 | static int omap_usb2_phy_exit(struct phy *usb_phy) | |
158 | { | |
159 | return omap_usb_phy_power(usb_phy, false); | |
160 | } | |
161 | ||
162 | struct phy_ops omap_usb2_phy_ops = { | |
163 | .init = omap_usb2_phy_init, | |
164 | .power_on = omap_usb2_phy_power_on, | |
165 | .power_off = omap_usb2_phy_power_off, | |
166 | .exit = omap_usb2_phy_exit, | |
167 | }; | |
168 | ||
169 | int omap_usb2_phy_probe(struct udevice *dev) | |
170 | { | |
171 | int rc; | |
172 | struct regmap *regmap; | |
173 | struct omap_usb2_phy *priv = dev_get_priv(dev); | |
174 | const struct usb_phy_data *data; | |
175 | u32 tmp[2]; | |
176 | ||
177 | data = (const struct usb_phy_data *)dev_get_driver_data(dev); | |
178 | if (!data) | |
179 | return -EINVAL; | |
180 | ||
181 | if (data->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) { | |
182 | u32 base = dev_read_addr(dev); | |
183 | ||
184 | if (base == FDT_ADDR_T_NONE) | |
185 | return -EINVAL; | |
186 | priv->phy_base = (void *)base; | |
187 | priv->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT; | |
188 | } | |
189 | ||
190 | regmap = syscon_regmap_lookup_by_phandle(dev, "syscon-phy-power"); | |
512a84c4 JJH |
191 | if (!IS_ERR(regmap)) { |
192 | priv->pwr_regmap = regmap; | |
193 | rc = dev_read_u32_array(dev, "syscon-phy-power", tmp, 2); | |
194 | if (rc) { | |
195 | printf("couldn't get power reg. offset (err %d)\n", rc); | |
196 | return rc; | |
197 | } | |
198 | priv->pwr_reg_offset = tmp[1]; | |
199 | return 0; | |
668257e0 | 200 | } |
512a84c4 JJH |
201 | regmap = syscon_regmap_lookup_by_phandle(dev, "ctrl-module"); |
202 | if (!IS_ERR(regmap)) { | |
203 | priv->pwr_regmap = regmap; | |
204 | priv->pwr_reg_offset = 0; | |
205 | return 0; | |
668257e0 | 206 | } |
668257e0 | 207 | |
512a84c4 JJH |
208 | printf("can't get regmap (err %ld)\n", PTR_ERR(regmap)); |
209 | return PTR_ERR(regmap); | |
668257e0 JJH |
210 | } |
211 | ||
212 | U_BOOT_DRIVER(omap_usb2_phy) = { | |
213 | .name = "omap_usb2_phy", | |
214 | .id = UCLASS_PHY, | |
215 | .of_match = omap_usb2_id_table, | |
216 | .probe = omap_usb2_phy_probe, | |
217 | .ops = &omap_usb2_phy_ops, | |
218 | .priv_auto_alloc_size = sizeof(struct omap_usb2_phy), | |
219 | }; |