]>
Commit | Line | Data |
---|---|---|
53633a89 TR |
1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
2 | ||
3 | /dts-v1/; | |
4 | ||
5 | #include <dt-bindings/gpio/gpio.h> | |
6 | #include <dt-bindings/pinctrl/rockchip.h> | |
7 | #include <dt-bindings/soc/rockchip,vop2.h> | |
8 | #include "rk3566.dtsi" | |
9 | ||
10 | / { | |
11 | model = "Firefly Station M2"; | |
12 | compatible = "firefly,rk3566-roc-pc", "rockchip,rk3566"; | |
13 | ||
14 | aliases { | |
93743d24 | 15 | ethernet0 = &gmac1; |
53633a89 TR |
16 | mmc0 = &sdmmc0; |
17 | mmc1 = &sdhci; | |
18 | mmc2 = &sdmmc1; | |
19 | }; | |
20 | ||
21 | chosen: chosen { | |
22 | stdout-path = "serial2:1500000n8"; | |
23 | }; | |
24 | ||
25 | gmac1_clkin: external-gmac1-clock { | |
26 | compatible = "fixed-clock"; | |
27 | clock-frequency = <125000000>; | |
28 | clock-output-names = "gmac1_clkin"; | |
29 | #clock-cells = <0>; | |
30 | }; | |
31 | ||
32 | hdmi-con { | |
33 | compatible = "hdmi-connector"; | |
34 | type = "a"; | |
35 | ||
36 | port { | |
37 | hdmi_con_in: endpoint { | |
38 | remote-endpoint = <&hdmi_out_con>; | |
39 | }; | |
40 | }; | |
41 | }; | |
42 | ||
43 | leds { | |
44 | compatible = "gpio-leds"; | |
45 | ||
46 | led-user { | |
47 | label = "user-led"; | |
48 | default-state = "on"; | |
49 | gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; | |
50 | linux,default-trigger = "heartbeat"; | |
51 | pinctrl-names = "default"; | |
52 | pinctrl-0 = <&user_led_enable_h>; | |
53 | retain-state-suspended; | |
54 | }; | |
55 | }; | |
56 | ||
57 | rk809-sound { | |
58 | compatible = "simple-audio-card"; | |
59 | simple-audio-card,format = "i2s"; | |
60 | simple-audio-card,name = "STATION-M2-FRONT"; | |
61 | simple-audio-card,mclk-fs = <256>; | |
62 | status = "okay"; | |
63 | ||
64 | simple-audio-card,cpu { | |
65 | sound-dai = <&i2s1_8ch>; | |
66 | }; | |
67 | ||
68 | simple-audio-card,codec { | |
69 | sound-dai = <&rk809>; | |
70 | }; | |
71 | }; | |
72 | ||
73 | sdio_pwrseq: sdio-pwrseq { | |
74 | status = "okay"; | |
75 | compatible = "mmc-pwrseq-simple"; | |
76 | clocks = <&rk809 1>; | |
77 | clock-names = "ext_clock"; | |
78 | pinctrl-names = "default"; | |
79 | pinctrl-0 = <&wifi_enable_h>; | |
80 | reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; | |
81 | }; | |
82 | ||
83 | usb_5v: usb-5v-regulator { | |
84 | compatible = "regulator-fixed"; | |
85 | regulator-name = "usb_5v"; | |
86 | regulator-always-on; | |
87 | regulator-boot-on; | |
88 | regulator-min-microvolt = <5000000>; | |
89 | regulator-max-microvolt = <5000000>; | |
90 | }; | |
91 | ||
92 | vcc5v0_sys: vcc5v0-sys-regulator { | |
93 | compatible = "regulator-fixed"; | |
94 | regulator-name = "vcc5v0_sys"; | |
95 | regulator-always-on; | |
96 | regulator-boot-on; | |
97 | regulator-min-microvolt = <5000000>; | |
98 | regulator-max-microvolt = <5000000>; | |
99 | vin-supply = <&usb_5v>; | |
100 | }; | |
101 | ||
102 | vcc3v3_pcie: vcc3v3-pcie-regulator { | |
103 | compatible = "regulator-fixed"; | |
104 | enable-active-high; | |
105 | gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; | |
106 | pinctrl-names = "default"; | |
107 | pinctrl-0 = <&pcie_enable_h>; | |
108 | regulator-name = "vcc3v3_pcie"; | |
109 | regulator-min-microvolt = <3300000>; | |
110 | regulator-max-microvolt = <3300000>; | |
111 | vin-supply = <&vcc5v0_sys>; | |
112 | }; | |
113 | ||
114 | vcc3v3_sys: vcc3v3-sys-regulator { | |
115 | compatible = "regulator-fixed"; | |
116 | regulator-name = "vcc3v3_sys"; | |
117 | regulator-min-microvolt = <3300000>; | |
118 | regulator-max-microvolt = <3300000>; | |
119 | regulator-always-on; | |
120 | vin-supply = <&vcc5v0_sys>; | |
121 | }; | |
122 | ||
123 | vcc5v0_usb30_host: vcc5v0-usb30-host-regulator { | |
124 | compatible = "regulator-fixed"; | |
125 | regulator-name = "vcc5v0_usb30_host"; | |
126 | enable-active-high; | |
127 | gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; | |
128 | pinctrl-names = "default"; | |
129 | pinctrl-0 = <&vcc5v0_usb30_host_en_h>; | |
130 | regulator-always-on; | |
131 | regulator-min-microvolt = <5000000>; | |
132 | regulator-max-microvolt = <5000000>; | |
133 | vin-supply = <&vcc5v0_sys>; | |
134 | }; | |
135 | ||
136 | vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { | |
137 | compatible = "regulator-fixed"; | |
138 | regulator-name = "vcc5v0_usb_otg"; | |
139 | enable-active-high; | |
140 | gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; | |
141 | pinctrl-names = "default"; | |
142 | pinctrl-0 = <&vcc5v0_usb_otg_en_h>; | |
143 | regulator-always-on; | |
144 | regulator-min-microvolt = <5000000>; | |
145 | regulator-max-microvolt = <5000000>; | |
146 | vin-supply = <&vcc5v0_sys>; | |
147 | }; | |
148 | }; | |
149 | ||
150 | &combphy1 { | |
151 | status = "okay"; | |
152 | }; | |
153 | ||
154 | &combphy2 { | |
155 | status = "okay"; | |
156 | }; | |
157 | ||
158 | &cpu0 { | |
159 | cpu-supply = <&vdd_cpu>; | |
160 | }; | |
161 | ||
162 | &cpu1 { | |
163 | cpu-supply = <&vdd_cpu>; | |
164 | }; | |
165 | ||
166 | &cpu2 { | |
167 | cpu-supply = <&vdd_cpu>; | |
168 | }; | |
169 | ||
170 | &cpu3 { | |
171 | cpu-supply = <&vdd_cpu>; | |
172 | }; | |
173 | ||
174 | &gmac1 { | |
175 | assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; | |
176 | assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; | |
177 | clock_in_out = "input"; | |
178 | phy-mode = "rgmii"; | |
179 | phy-supply = <&vcc_3v3>; | |
180 | pinctrl-names = "default"; | |
181 | pinctrl-0 = <&gmac1m0_miim | |
182 | &gmac1m0_tx_bus2 | |
183 | &gmac1m0_rx_bus2 | |
184 | &gmac1m0_rgmii_clk | |
185 | &gmac1m0_clkinout | |
186 | &gmac1m0_rgmii_bus>; | |
187 | snps,reset-gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; | |
188 | snps,reset-active-low; | |
189 | /* Reset time is 20ms, 100ms for rtl8211f */ | |
190 | snps,reset-delays-us = <0 20000 100000>; | |
191 | tx_delay = <0x4f>; | |
192 | rx_delay = <0x24>; | |
193 | phy-handle = <&rgmii_phy1>; | |
194 | status = "okay"; | |
195 | }; | |
196 | ||
197 | &gpu { | |
198 | mali-supply = <&vdd_gpu>; | |
199 | status = "okay"; | |
200 | }; | |
201 | ||
202 | &hdmi { | |
203 | avdd-0v9-supply = <&vdda0v9_image>; | |
204 | avdd-1v8-supply = <&vcca1v8_image>; | |
205 | status = "okay"; | |
206 | }; | |
207 | ||
208 | &hdmi_in { | |
209 | hdmi_in_vp0: endpoint { | |
210 | remote-endpoint = <&vp0_out_hdmi>; | |
211 | }; | |
212 | }; | |
213 | ||
214 | &hdmi_out { | |
215 | hdmi_out_con: endpoint { | |
216 | remote-endpoint = <&hdmi_con_in>; | |
217 | }; | |
218 | }; | |
219 | ||
220 | &hdmi_sound { | |
221 | status = "okay"; | |
222 | }; | |
223 | ||
224 | &i2c0 { | |
225 | status = "okay"; | |
226 | ||
227 | vdd_cpu: regulator@1c { | |
228 | compatible = "tcs,tcs4525"; | |
229 | reg = <0x1c>; | |
230 | fcs,suspend-voltage-selector = <1>; | |
231 | regulator-name = "vdd_cpu"; | |
232 | regulator-min-microvolt = <800000>; | |
233 | regulator-max-microvolt = <1150000>; | |
234 | regulator-ramp-delay = <2300>; | |
235 | regulator-always-on; | |
236 | regulator-boot-on; | |
237 | vin-supply = <&vcc5v0_sys>; | |
238 | ||
239 | regulator-state-mem { | |
240 | regulator-off-in-suspend; | |
241 | }; | |
242 | }; | |
243 | ||
244 | rk809: pmic@20 { | |
245 | compatible = "rockchip,rk809"; | |
246 | reg = <0x20>; | |
247 | interrupt-parent = <&gpio0>; | |
248 | interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; | |
249 | clock-output-names = "rk808-clkout1", "rk808-clkout2"; | |
250 | assigned-clocks = <&cru I2S1_MCLKOUT_TX>; | |
251 | assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; | |
252 | clock-names = "mclk"; | |
253 | clocks = <&cru I2S1_MCLKOUT_TX>; | |
254 | pinctrl-names = "default"; | |
255 | pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; | |
256 | rockchip,system-power-controller; | |
257 | wakeup-source; | |
258 | #clock-cells = <1>; | |
259 | #sound-dai-cells = <0>; | |
260 | ||
261 | vcc1-supply = <&vcc3v3_sys>; | |
262 | vcc2-supply = <&vcc3v3_sys>; | |
263 | vcc3-supply = <&vcc3v3_sys>; | |
264 | vcc4-supply = <&vcc3v3_sys>; | |
265 | vcc5-supply = <&vcc3v3_sys>; | |
266 | vcc6-supply = <&vcc3v3_sys>; | |
267 | vcc7-supply = <&vcc3v3_sys>; | |
268 | vcc8-supply = <&vcc3v3_sys>; | |
269 | vcc9-supply = <&vcc3v3_sys>; | |
270 | ||
271 | codec { | |
272 | mic-in-differential; | |
273 | }; | |
274 | ||
275 | regulators { | |
276 | vdd_log: DCDC_REG1 { | |
277 | regulator-name = "vdd_log"; | |
278 | regulator-always-on; | |
279 | regulator-boot-on; | |
280 | regulator-min-microvolt = <500000>; | |
281 | regulator-max-microvolt = <1350000>; | |
282 | regulator-ramp-delay = <6001>; | |
283 | ||
284 | regulator-state-mem { | |
285 | regulator-on-in-suspend; | |
286 | regulator-suspend-microvolt = <900000>; | |
287 | }; | |
288 | }; | |
289 | ||
290 | vdd_gpu: DCDC_REG2 { | |
291 | regulator-name = "vdd_gpu"; | |
292 | regulator-min-microvolt = <900000>; | |
293 | regulator-max-microvolt = <1350000>; | |
294 | regulator-ramp-delay = <6001>; | |
295 | ||
296 | regulator-state-mem { | |
297 | regulator-off-in-suspend; | |
298 | regulator-suspend-microvolt = <900000>; | |
299 | }; | |
300 | }; | |
301 | ||
302 | vcc_ddr: DCDC_REG3 { | |
303 | regulator-name = "vcc_ddr"; | |
304 | regulator-always-on; | |
305 | regulator-boot-on; | |
306 | regulator-min-microvolt = <1100000>; | |
307 | regulator-max-microvolt = <1100000>; | |
308 | regulator-initial-mode = <0x2>; | |
309 | regulator-state-mem { | |
310 | regulator-on-in-suspend; | |
311 | }; | |
312 | }; | |
313 | ||
314 | vdd_npu: DCDC_REG4 { | |
315 | regulator-name = "vdd_npu"; | |
316 | regulator-min-microvolt = <900000>; | |
317 | regulator-max-microvolt = <1350000>; | |
318 | regulator-initial-mode = <0x2>; | |
319 | regulator-state-mem { | |
320 | regulator-off-in-suspend; | |
321 | }; | |
322 | }; | |
323 | ||
324 | vcc_1v8: DCDC_REG5 { | |
325 | regulator-name = "vcc_1v8"; | |
326 | regulator-always-on; | |
327 | regulator-boot-on; | |
328 | regulator-min-microvolt = <1800000>; | |
329 | regulator-max-microvolt = <1800000>; | |
330 | ||
331 | regulator-state-mem { | |
332 | regulator-on-in-suspend; | |
333 | regulator-suspend-microvolt = <1800000>; | |
334 | }; | |
335 | }; | |
336 | ||
337 | vdda0v9_image: LDO_REG1 { | |
338 | regulator-name = "vdda0v9_image"; | |
339 | regulator-always-on; | |
340 | regulator-boot-on; | |
341 | regulator-min-microvolt = <900000>; | |
342 | regulator-max-microvolt = <900000>; | |
343 | ||
344 | regulator-state-mem { | |
345 | regulator-on-in-suspend; | |
346 | regulator-suspend-microvolt = <900000>; | |
347 | }; | |
348 | }; | |
349 | ||
350 | vdda_0v9: LDO_REG2 { | |
351 | regulator-name = "vdda_0v9"; | |
352 | regulator-always-on; | |
353 | regulator-boot-on; | |
354 | regulator-min-microvolt = <900000>; | |
355 | regulator-max-microvolt = <900000>; | |
356 | ||
357 | regulator-state-mem { | |
358 | regulator-on-in-suspend; | |
359 | regulator-suspend-microvolt = <900000>; | |
360 | }; | |
361 | }; | |
362 | ||
363 | vdda0v9_pmu: LDO_REG3 { | |
364 | regulator-name = "vdda0v9_pmu"; | |
365 | regulator-always-on; | |
366 | regulator-boot-on; | |
367 | regulator-min-microvolt = <900000>; | |
368 | regulator-max-microvolt = <900000>; | |
369 | regulator-state-mem { | |
370 | regulator-on-in-suspend; | |
371 | regulator-suspend-microvolt = <900000>; | |
372 | }; | |
373 | }; | |
374 | ||
375 | vccio_acodec: LDO_REG4 { | |
376 | regulator-name = "vccio_acodec"; | |
377 | regulator-always-on; | |
378 | regulator-boot-on; | |
379 | regulator-min-microvolt = <3300000>; | |
380 | regulator-max-microvolt = <3300000>; | |
381 | ||
382 | regulator-state-mem { | |
383 | regulator-on-in-suspend; | |
384 | regulator-suspend-microvolt = <3300000>; | |
385 | ||
386 | }; | |
387 | }; | |
388 | ||
389 | vccio_sd: LDO_REG5 { | |
390 | regulator-name = "vccio_sd"; | |
391 | regulator-always-on; | |
392 | regulator-boot-on; | |
393 | regulator-min-microvolt = <1800000>; | |
394 | regulator-max-microvolt = <3300000>; | |
395 | ||
396 | regulator-state-mem { | |
397 | regulator-on-in-suspend; | |
398 | regulator-suspend-microvolt = <3300000>; | |
399 | }; | |
400 | }; | |
401 | ||
402 | vcc3v3_pmu: LDO_REG6 { | |
403 | regulator-name = "vcc3v3_pmu"; | |
404 | regulator-always-on; | |
405 | regulator-boot-on; | |
406 | regulator-min-microvolt = <3300000>; | |
407 | regulator-max-microvolt = <3300000>; | |
408 | ||
409 | regulator-state-mem { | |
410 | regulator-on-in-suspend; | |
411 | regulator-suspend-microvolt = <3300000>; | |
412 | }; | |
413 | }; | |
414 | ||
415 | vcca_1v8: LDO_REG7 { | |
416 | regulator-name = "vcca_1v8"; | |
417 | regulator-always-on; | |
418 | regulator-boot-on; | |
419 | regulator-min-microvolt = <1800000>; | |
420 | regulator-max-microvolt = <1800000>; | |
421 | ||
422 | regulator-state-mem { | |
423 | regulator-on-in-suspend; | |
424 | regulator-suspend-microvolt = <1800000>; | |
425 | }; | |
426 | }; | |
427 | ||
428 | vcca1v8_pmu: LDO_REG8 { | |
429 | regulator-name = "vcca1v8_pmu"; | |
430 | regulator-always-on; | |
431 | regulator-boot-on; | |
432 | regulator-min-microvolt = <1800000>; | |
433 | regulator-max-microvolt = <1800000>; | |
434 | ||
435 | regulator-state-mem { | |
436 | regulator-on-in-suspend; | |
437 | regulator-suspend-microvolt = <1800000>; | |
438 | }; | |
439 | }; | |
440 | ||
441 | vcca1v8_image: LDO_REG9 { | |
442 | regulator-name = "vcca1v8_image"; | |
443 | regulator-always-on; | |
444 | regulator-boot-on; | |
445 | regulator-min-microvolt = <1800000>; | |
446 | regulator-max-microvolt = <1800000>; | |
447 | ||
448 | regulator-state-mem { | |
449 | regulator-on-in-suspend; | |
450 | regulator-suspend-microvolt = <1800000>; | |
451 | }; | |
452 | }; | |
453 | ||
454 | vcc_3v3: SWITCH_REG1 { | |
455 | regulator-boot-on; | |
456 | regulator-name = "vcc3v3"; | |
457 | }; | |
458 | ||
459 | vcc3v3_sd: SWITCH_REG2 { | |
460 | regulator-name = "vcc3v3_sd"; | |
461 | regulator-always-on; | |
462 | regulator-boot-on; | |
463 | }; | |
464 | }; | |
465 | }; | |
466 | }; | |
467 | ||
468 | &i2c1 { | |
469 | status = "okay"; | |
470 | }; | |
471 | ||
472 | &i2c2 { | |
473 | status = "okay"; | |
474 | }; | |
475 | ||
476 | &i2c3 { | |
477 | pinctrl-names = "default"; | |
478 | pinctrl-0 = <&i2c3m0_xfer>; | |
479 | status = "okay"; | |
480 | }; | |
481 | ||
482 | &i2s0_8ch { | |
483 | status = "okay"; | |
484 | }; | |
485 | ||
486 | &i2s1_8ch { | |
487 | pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_sclkrx | |
488 | &i2s1m0_lrcktx &i2s1m0_lrckrx | |
489 | &i2s1m0_sdi0 &i2s1m0_sdo0>; | |
490 | rockchip,trcm-sync-tx-only; | |
491 | status = "okay"; | |
492 | }; | |
493 | ||
494 | &mdio1 { | |
495 | rgmii_phy1: ethernet-phy@0 { | |
496 | compatible = "ethernet-phy-ieee802.3-c22"; | |
497 | reg = <0x0>; | |
498 | }; | |
499 | }; | |
500 | ||
501 | &pcie2x1 { | |
502 | pinctrl-names = "default"; | |
503 | pinctrl-0 = <&pcie_reset_h>; | |
504 | reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; | |
505 | vpcie3v3-supply = <&vcc3v3_pcie>; | |
506 | status = "okay"; | |
507 | }; | |
508 | ||
509 | &pinctrl { | |
510 | bt { | |
511 | bt_enable_h: bt-enable-h { | |
512 | rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; | |
513 | }; | |
514 | ||
515 | bt_host_wake_l: bt-host-wake-l { | |
516 | rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>; | |
517 | }; | |
518 | ||
519 | bt_wake_l: bt-wake-l { | |
520 | rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; | |
521 | }; | |
522 | }; | |
523 | ||
524 | leds { | |
525 | user_led_enable_h: user-led-enable-h { | |
526 | rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; | |
527 | }; | |
528 | }; | |
529 | ||
530 | pcie { | |
531 | pcie_enable_h: pcie-enable-h { | |
532 | rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; | |
533 | }; | |
534 | ||
535 | pcie_reset_h: pcie-reset-h { | |
536 | rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; | |
537 | }; | |
538 | }; | |
539 | ||
540 | pmic { | |
541 | pmic_int: pmic_int { | |
542 | rockchip,pins = | |
543 | <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; | |
544 | }; | |
545 | }; | |
546 | ||
547 | sdio-pwrseq { | |
548 | wifi_enable_h: wifi-enable-h { | |
549 | rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; | |
550 | }; | |
551 | }; | |
552 | ||
553 | usb { | |
554 | vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h { | |
555 | rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; | |
556 | }; | |
557 | ||
558 | vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h { | |
559 | rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; | |
560 | }; | |
561 | }; | |
562 | }; | |
563 | ||
564 | &pmu_io_domains { | |
565 | status = "okay"; | |
566 | pmuio1-supply = <&vcc3v3_pmu>; | |
567 | pmuio2-supply = <&vcc3v3_pmu>; | |
568 | vccio1-supply = <&vccio_acodec>; | |
569 | vccio2-supply = <&vcc_1v8>; | |
570 | vccio3-supply = <&vccio_sd>; | |
571 | vccio4-supply = <&vcc_1v8>; | |
572 | vccio5-supply = <&vcc_3v3>; | |
573 | vccio6-supply = <&vcc_1v8>; | |
574 | vccio7-supply = <&vcc_3v3>; | |
575 | }; | |
576 | ||
577 | &sdhci { | |
578 | bus-width = <8>; | |
579 | mmc-hs200-1_8v; | |
580 | non-removable; | |
581 | vmmc-supply = <&vcc_3v3>; | |
582 | vqmmc-supply = <&vcc_1v8>; | |
583 | status = "okay"; | |
584 | }; | |
585 | ||
586 | &sdmmc0 { | |
587 | bus-width = <4>; | |
588 | cap-sd-highspeed; | |
589 | cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; | |
590 | disable-wp; | |
591 | pinctrl-names = "default"; | |
592 | pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; | |
593 | sd-uhs-sdr104; | |
594 | vmmc-supply = <&vcc3v3_sd>; | |
595 | vqmmc-supply = <&vccio_sd>; | |
596 | status = "okay"; | |
597 | }; | |
598 | ||
599 | &sdmmc1 { | |
600 | bus-width = <4>; | |
601 | cap-sd-highspeed; | |
602 | cap-sdio-irq; | |
603 | keep-power-in-suspend; | |
604 | mmc-pwrseq = <&sdio_pwrseq>; | |
605 | vmmc-supply = <&vcc3v3_sys>; | |
606 | vqmmc-supply = <&vcca1v8_pmu>; | |
607 | pinctrl-names = "default"; | |
608 | pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; | |
609 | status = "okay"; | |
610 | }; | |
611 | ||
612 | &tsadc { | |
613 | status = "okay"; | |
614 | }; | |
615 | ||
616 | &uart0 { | |
617 | pinctrl-names = "default"; | |
618 | pinctrl-0 = <&uart0_xfer>; | |
619 | status = "okay"; | |
620 | }; | |
621 | ||
622 | &uart1 { | |
623 | pinctrl-names = "default"; | |
624 | pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>; | |
625 | status = "okay"; | |
626 | uart-has-rtscts; | |
627 | ||
628 | bluetooth { | |
629 | compatible = "brcm,bcm43438-bt"; | |
630 | clocks = <&rk809 1>; | |
631 | clock-names = "lpo"; | |
632 | device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; | |
633 | host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; | |
634 | shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; | |
635 | pinctrl-names = "default"; | |
636 | pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; | |
637 | vbat-supply = <&vcc3v3_sys>; | |
638 | vddio-supply = <&vcca1v8_pmu>; | |
639 | }; | |
640 | }; | |
641 | ||
642 | &uart2 { | |
643 | status = "okay"; | |
644 | }; | |
645 | ||
646 | &usb2phy0_host { | |
647 | phy-supply = <&vcc5v0_usb30_host>; | |
648 | status = "okay"; | |
649 | }; | |
650 | ||
651 | &usb2phy0_otg { | |
652 | phy-supply = <&vcc5v0_usb_otg>; | |
653 | status = "okay"; | |
654 | }; | |
655 | ||
656 | &usb2phy1_otg { | |
657 | phy-supply = <&vcc5v0_usb30_host>; | |
658 | status = "okay"; | |
659 | }; | |
660 | ||
661 | &usb2phy0 { | |
662 | status = "okay"; | |
663 | }; | |
664 | ||
665 | &usb2phy1 { | |
666 | status = "okay"; | |
667 | }; | |
668 | ||
669 | &usb_host0_xhci { | |
670 | status = "okay"; | |
671 | }; | |
672 | ||
673 | &usb_host1_xhci { | |
674 | status = "okay"; | |
675 | }; | |
676 | ||
677 | &usb_host0_ehci { | |
678 | status = "okay"; | |
679 | }; | |
680 | ||
681 | &usb_host0_ohci { | |
682 | status = "okay"; | |
683 | }; | |
684 | ||
685 | &vop { | |
686 | assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; | |
687 | assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; | |
688 | status = "okay"; | |
689 | }; | |
690 | ||
691 | &vop_mmu { | |
692 | status = "okay"; | |
693 | }; | |
694 | ||
695 | &vp0 { | |
696 | vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { | |
697 | reg = <ROCKCHIP_VOP2_EP_HDMI0>; | |
698 | remote-endpoint = <&hdmi_in_vp0>; | |
699 | }; | |
700 | }; |