ARC: dwmmc: Adding DesignWare MMC driver support for ARC devboards

[thirdparty/u-boot.git] / Makefile

diff --git a/Makefile b/Makefile
index 5bc3deed98b926c25319501c24dfc93aa09b3ace..2824a6e159440c9475d76fdfcdf40915dfa03b80 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -3,7 +3,7 @@
 VERSION = 2019
 PATCHLEVEL = 04
 SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION =
 NAME =
 
 # *DOCUMENTATION*
@@ -291,6 +291,9 @@ DARWIN_MINOR_VERSION        = $(shell sw_vers -productVersion | cut -f 2 -d '.')
 os_x_before    = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
        $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
 
+os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \
+       $(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)  
+
 # Snow Leopards build environment has no longer restrictions as described above
 HOSTCC       = $(call os_x_before, 10, 5, "cc", "gcc")
 HOSTCFLAGS  += $(call os_x_before, 10, 4, "-traditional-cpp")
@@ -300,6 +303,10 @@ HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
 # in some host tools which is a problem then ... so disable ASLR for these
 # tools
 HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
+
+# macOS Mojave (10.14.X) 
+# Undefined symbols for architecture x86_64: "_PyArg_ParseTuple"
+HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "")
 endif
 
 # Decide whether to build built-in, modular, or both.
@@ -893,7 +900,7 @@ cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
        >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
 
 quiet_cmd_mkfitimage = MKIMAGE $@
-cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@\
+cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@\
        >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
 
 quiet_cmd_cat = CAT     $@
@@ -938,11 +945,22 @@ ifneq ($(CONFIG_DM_USB)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
        @echo >&2 "===================================================="
 endif
 endif
-ifeq ($(CONFIG_LIBATA)$(CONFIG_MVSATA_IDE),y)
-ifneq ($(CONFIG_DM_SCSI),y)
+ifeq ($(CONFIG_MVSATA_IDE),y)
+       @echo >&2 "===================== WARNING ======================"
+       @echo >&2 "This board does use CONFIG_MVSATA_IDE which is not"
+       @echo >&2 "ported to driver-model (DM) yet. Please update the storage"
+       @echo >&2 "controller driver to use CONFIG_AHCI before the v2019.07"
+       @echo >&2 "release."
+       @echo >&2 "Failure to update by the deadline may result in board removal."
+       @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+       @echo >&2 "===================================================="
+endif
+ifeq ($(CONFIG_LIBATA),y)
+ifneq ($(CONFIG_AHCI),y)
        @echo >&2 "===================== WARNING ======================"
-       @echo >&2 "This board does not use CONFIG_DM_SCSI. Please update"
-       @echo >&2 "the storage controller to use CONFIG_DM_SCSI before the v2019.07 release."
+       @echo >&2 "This board does use CONFIG_LIBATA but has CONFIG_AHCI not"
+       @echo >&2 "enabled. Please update the storage controller driver to use"
+       @echo >&2 "CONFIG_AHCI before the v2019.07 release."
        @echo >&2 "Failure to update by the deadline may result in board removal."
        @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
        @echo >&2 "===================================================="
@@ -1013,6 +1031,20 @@ quiet_cmd_copy = COPY    $@
 
 ifeq ($(CONFIG_MULTI_DTB_FIT),y)
 
+ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
+FINAL_DTB_CONTAINER = fit-dtb.blob.lzo
+else ifeq ($(CONFIG_MULTI_DTB_FIT_GZIP),y)
+FINAL_DTB_CONTAINER = fit-dtb.blob.gz
+else
+FINAL_DTB_CONTAINER = fit-dtb.blob
+endif
+
+fit-dtb.blob.gz: fit-dtb.blob
+       @gzip -kf9 $< > $@
+
+fit-dtb.blob.lzo: fit-dtb.blob
+       @lzop -f9 $< > $@
+
 fit-dtb.blob: dts/dt.dtb FORCE
        $(call if_changed,mkimage)
 
@@ -1020,7 +1052,7 @@ MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
        -a 0 -e 0 -E \
        $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
 
-u-boot-fit-dtb.bin: u-boot-nodtb.bin fit-dtb.blob
+u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER)
        $(call if_changed,cat)
 
 u-boot.bin: u-boot-fit-dtb.bin FORCE
@@ -1200,6 +1232,12 @@ u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
        $(call if_changed,mkimage)
        $(BOARD_SIZE_CHECK)
 
+ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
+MKIMAGEFLAGS_u-boot.itb =
+else
+MKIMAGEFLAGS_u-boot.itb = -E
+endif
+
 u-boot.itb: u-boot-nodtb.bin dts/dt.dtb $(U_BOOT_ITS) FORCE
        $(call if_changed,mkfitimage)
        $(BOARD_SIZE_CHECK)
@@ -1219,9 +1257,11 @@ else
 SPL_PAYLOAD := u-boot.bin
 endif
 
+SPL_IMAGE := $(CONFIG_SPL_IMAGE:"%"=%)
+
 OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
                                   --pad-to=$(CONFIG_SPL_PAD_TO)
-u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
+u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
        $(call if_changed,pad_cat)
 
 ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)